Wooden roller coaster

A wooden roller coaster is a type of roller coaster classified by its wooden track, which consists of running rails made of flat steel strips mounted on laminated wood. The support structure is also typically made of wood, but may also be made of steel lattice or truss, which has no bearing on a wooden coaster's classification. The type of wood often selected in the construction of wooden coasters worldwide is southern yellow pine, which grows abundantly in the southern United States, due to its density and adherence to different forms of pressure treatment.^{[citation needed]}

Early wooden roller coaster designs of the 19th century featured a single set of wheels running on top of the track, which was common in scenic railway rides. John A. Miller introduced side friction coasters and later underfriction coasters in the early 20th century, which added additional sets of wheels running along multiple sides of the track to allow for more intense ride design with sharper turns and steeper drops. The underfriction design became commonplace and continues to be used in modern roller coaster design.

Traditionally, wooden roller coasters were not capable of featuring extreme elements such as inversions, near-vertical drops, and overbanked turns commonly found on steel roller coasters after the introduction of tubular steel track by Arrow Development in 1959. Son of Beast at Kings Island made history in 2000 by incorporating the first successful attempt of an inversion on a wooden coaster, a vertical loop made of steel. A decade later, the introduction of Topper Track by Rocky Mountain Construction allowed for new possibilities, with corkscrews, overbanked turns, and other inverting elements appearing on wooden coasters such as Outlaw Run at Silver Dollar City and Goliath at Six Flags Great America.

The 1920s are generally considered the Golden Age of coaster design. This was the decade when many of the world's most iconic coasters were built. Some of these include the Giant Dipper at the Santa Cruz Beach Boardwalk and its counterpart at Belmont Park, the Cyclone at Coney Island, the Big Dipper at Geauga Lake, The Thriller at Euclid Beach Park, and the Roller Coaster at Lagoon. All of these rides were built during this time. The decade was also the design peak for some of the world's greatest coaster designers, including John A. Miller, Harry Traver, Herb Schmeck, and the partnership of Prior and Church. Many wooden roller coasters of this time were demolished during the Great Depression, but a few still stand as American Coaster Enthusiasts (ACE) classics and landmarks.

This relatively quiet age of coaster design following the Great Depression was brought to an end by The Racer at Kings Island, which opened in 1972 and sparked a second "Golden Age" of wooden coaster design.^{[citation needed]} After their success with the Racer at Kings Island, the Philadelphia Toboggan Company (PTC) constructed another 9 roller coasters over the next decade. About half were small family coasters, two were racing coasters^{[definition needed]} similar to the Racer, and two were out and back coasters with custom designs. One of these, Screamin' Eagle at Six Flags St. Louis, was the last coaster designed by John Allen before his retirement. After these coasters, PTC stopped producing roller coasters, but continues to produce wooden roller coaster trains as Philadelphia Toboggan Coasters. Their distinctive rectangular cars are widely used on wooden coasters around the world.

A notable non-PTC coaster built during this time was The Beast at Kings Island. After John Allen refused to design the coaster in lieu of retirement, Kings Island built the coaster themselves, with the coaster designed by Al Collins and Jeff Gramke and construction overseen by Charlie Dinn. Rather than a typical out and back layout, the coaster sprawled over the woods at the back of the park, using the terrain to create an elevation change from lowest to highest point of 201 feet, even though the coaster was only 118 feet tall. The coaster also had two lift hills which, while common for mine train coasters at the time, was uncommon for wooden coasters. Opening in 1979, the coaster was, and still is, the longest wooden roller coaster in the world at 7,361 feet. Another significant wooden coaster of this era was the racing American Eagle at (now) Six Flags Great America, built by Intamin in 1981, which still holds the records for racing wooden coasters of height (127 ft), length (4650 ft), speed (66 mph), and drop (147 ft).

After the surge in the 1970s, wooden coasters construction became stagnant due to the steel roller coaster being much more popular. Most original coasters during this time were designed by William Cobb, such as Monstre at La Ronde. Another trend during the 1980s was relocating old wooden coasters in danger of being destroyed. Charlie Dinn, who formed Dinn Corporation after leaving Kings Island in 1984, oversaw some of these relocations, including the relocation of The Rocket from Playland Park to Knoebels Amusement Resort in Pennsylvania. It now operates as the Phoenix and is ranked highly on wooden coaster polls.

In 1988, Charlie Dinn started a partnership with Curtis D. Summers to design and build new wooden coasters. Between 1988 and 1991, they designed and built ten new wooden coasters. While most were of typical wooden coaster size, a few set coaster records. Hercules at Dorney Park & Wildwater Kingdom, built in 1989, had the tallest wooden coaster drop at 150 feet. Texas Giant at Six Flags Over Texas and Mean Streak at Cedar Point were large wooden coasters with similar layouts, with the later opening as the tallest wooden coaster in the world at 161 feet. After a dispute during construction of Pegasus at Efteling, Dinn Corporation closed down and the partnership ended.