Anode ray

Anode rayMain

Community hub

Anode ray

8 pages, 0 posts

0 subscribers

Recent from talks

Be the first to start a discussion here.

Recent from talks

Be the first to start a discussion here.

Contribute something

About hubMembersContent overviewUpdatesRules

Main reference articles

Anode ray

View on Wikipedia

from Wikipedia

An anode ray (also positive ray or canal ray) is a beam of positive ions that is created by certain types of gas-discharge tubes. They were first observed in Crookes tubes during experiments by the German scientist Eugen Goldstein, in 1886.^[1] Later work on anode rays by Wilhelm Wien and J. J. Thomson led to the development of mass spectrometry.

Anode ray tube

[edit]

Goldstein used a gas-discharge tube which had a perforated cathode. When an electrical potential of several thousand volts is applied between the cathode and anode, faint luminous "rays" are seen extending from the holes in the back of the cathode. These rays are beams of particles moving in a direction opposite to the "cathode rays", which are streams of electrons which move toward the anode. Goldstein called these positive rays Kanalstrahlen, "channel rays", or "canal rays", because these rays passed through the holes or channels in the cathode.

The process by which anode rays are formed in a gas-discharge anode ray tube is as follows. When the high voltage is applied to the tube, its electric field accelerates the small number of ions (electrically charged atoms) always present in the gas, created by natural processes such as radioactivity. These collide with atoms of the gas, knocking electrons off them and creating more positive ions. These ions and electrons in turn strike more atoms, creating more positive ions in a chain reaction. The positive ions are all attracted to the negative cathode, and some pass through the holes in the cathode. These are the anode rays.

By the time they reach the cathode, the ions have been accelerated to a sufficient speed such that when they collide with other atoms or molecules in the gas they excite the species to a higher energy level. In returning to their former energy levels these atoms or molecules release the energy that they had gained. That energy gets emitted as light. This light-producing process, called fluorescence, causes a glow in the region behind the cathode.

Anode ray ion source

[edit]

An anode ray ion source typically is an anode coated with the halide salt of an alkali or alkaline earth metal.^[2]^[3] Application of a sufficiently high electrical potential creates alkali or alkaline earth ions and their emission is most brightly visible at the anode.

References

[edit]

^ Grayson, Michael A. (2002). Measuring mass: from positive rays to proteins. Philadelphia: Chemical Heritage Press. pp. 4. ISBN 0-941901-31-9.
^ Thomson, J. J. (1921). Rays of positive electricity, and their application to chemical analyses (1921). pp. 142. Retrieved 2013-04-22.
^ Kenneth Tompkins Bainbridge; Alfred Otto Nier (1950). Relative Isotopic Abundances of the Elements. National Academies. pp. 2–. NAP:16632. Retrieved 21 April 2013.

External links

[edit]

Rays Of Positive Electricity by J.J. Thomson Proceedings of the Royal Society, A 89, 1-20 (1913)
The Goldstein canal ray tube at The Cathode Ray Tube site

Revisions and contributors Edit on Wikipedia Read on Wikipedia

View on Grokipedia

from Grokipedia

Anode rays, also known as canal rays, are beams of positively charged ions produced in a low-pressure gas discharge tube when a high voltage is applied across a perforated cathode and an anode, causing the ions to stream from the anode through the cathode's channels toward the tube's far end.^[1] These rays were discovered in 1886 by German physicist Eugen Goldstein during experiments with modified Crookes tubes, where he observed luminous streams emerging from the perforations in the cathode, traveling in the direction opposite to the negatively charged cathode rays.^[1] The ions forming the rays result from the collision of high-speed electrons from the cathode with neutral gas atoms, stripping away electrons and leaving positively charged residues whose composition depends on the type of gas present in the tube.^[2] Key properties of anode rays include their propagation in straight lines, deflection by electric fields toward the negatively charged plate and by magnetic fields in a direction consistent with positive charge carriers, and velocities significantly lower than those of cathode rays.^[2] Unlike cathode rays, which are uniform streams of electrons, anode rays exhibit a variable charge-to-mass ratio (e/m) that corresponds to the atomic mass of the gas ions, such as hydrogen ions (protons) when hydrogen is used.^[3] They can produce fluorescence on glass walls, ionize surrounding gases, affect photographic plates, and even penetrate thin metal foils or cause mechanical effects upon impact.^[2] The study of anode rays played a pivotal role in early 20th-century atomic physics, enabling pioneering mass spectrometric analyses by researchers like Wilhelm Wien in 1898 and J.J. Thomson starting in 1912.^[3] Thomson's positive ray apparatus, an evolution of Goldstein's setup, provided direct evidence for neon isotopes in 1913, confirming that atoms of the same element could have different masses while sharing identical chemical properties.^[3] This work laid foundational groundwork for mass spectrometry and advanced understanding of atomic structure, complementing the discovery of the electron and nucleus.^[3]

History

Discovery

In 1886, German physicist Eugen Goldstein discovered anode rays while conducting experiments with modified discharge tubes, building upon earlier investigations of cathode rays by William Crookes and others.^[1] These rays, initially termed "Kanalstrahlen" in German, represented streams of positively charged particles moving in the direction opposite to cathode rays.^[4] Goldstein employed a Crookes tube modified with a perforated cathode, consisting of a glass discharge tube partially evacuated to low pressure and fitted with electrodes at each end.^[1] He applied a high voltage of several thousand volts across the electrodes using induction coils, which ionized the residual gas within the tube and accelerated the resulting positive ions toward the cathode.^[4] The perforations in the cathode allowed some of these ions to pass through rather than being neutralized upon impact.^[5] Upon application of the voltage, faint luminous rays became visible extending from the holes in the back of the cathode, appearing as a parallel beam behind it.^[6] These rays caused fluorescence on the walls of the tube, producing a characteristic pinkish-red glow in the region near the cathode.^[7] Goldstein named the phenomenon "Kanalstrahlen" (canal rays) owing to the rays' emergence through the cathode's channels; the terms positive rays and anode rays later became common alternatives in English.^[4]

Development

Following Eugen Goldstein's initial observation of anode rays in 1886 using a perforated cathode in a discharge tube, subsequent research in the late 19th and early 20th centuries elucidated their nature as streams of positive ions derived from residual gas atoms, in stark contrast to cathode rays, which J.J. Thomson identified as negatively charged electrons in 1897.^[1]^[8] In 1898, Wilhelm Wien advanced the study by deflecting anode rays—also known as canal rays—with superimposed electric and magnetic fields in a velocity selector apparatus, enabling the first measurements of their charge-to-mass ratio (e/m).^[9] Wien's experiments demonstrated that the e/m ratio varied with the gas in the tube, indicating that the rays consisted of positively charged particles whose properties depended on the ionized gas species, such as hydrogen or helium.^[10] This work laid the groundwork for separating ions based on their mass-to-charge characteristics, confirming the rays as positive ions rather than neutral particles.^[11] Building on Wien's findings, J.J. Thomson conducted experiments between 1910 and 1912 at the Cavendish Laboratory, using an improved apparatus to analyze positive rays under parallel electric and magnetic fields, which produced characteristic parabolic traces on photographic plates corresponding to different ion masses.^[12] Thomson identified specific ions in the rays, including the positive hydrogen ion (later recognized as the proton) with an e/m ratio approximately 1/1,836 (or 1,836 times smaller) than that of the electron, and he observed parabolas for ions like H⁺, H₂⁺, and heavier species from neon and other gases.^[13] His parabolic mass spectra provided the first evidence for isotopic variations, such as the two neon isotopes (mass 20 and 22), revolutionizing the understanding of atomic composition.^[14] In the 1910s, Francis Aston, a student of Thomson, refined these techniques by developing the mass spectrograph in 1919, which employed magnetic deflection alone to focus ions of the same mass-to-charge ratio onto a straight line rather than parabolas, achieving higher resolution for precise isotope separation.^[15] Aston's instrument separated isotopes of elements like neon, chlorine, and hydrogen with accuracy sufficient to detect mass differences as small as 1 part in 10,000, confirming the whole-number rule for atomic masses and enabling the discovery of stable isotopes across the periodic table.^[10] This advancement solidified the recognition of anode rays as controllable beams of positive atomic and molecular ions, essential for probing atomic structure.^[16]

Production

Anode ray tube

The anode ray tube is a specialized gas-discharge apparatus consisting of an evacuated glass tube fitted with two electrodes: a cathode perforated with small channels and a positively charged anode opposite it. The tube is partially filled with a low-pressure gas, such as hydrogen or air, typically at around 0.01 mmHg to maintain conditions suitable for ionization without excessive collisions.^[17]^[18] This setup, pioneered by Eugen Goldstein in 1886, allows observation of positive ion streams emerging from the cathode perforations.^[1] Operation begins with the application of a high voltage, ranging from 2,000 to 10,000 volts (or higher in historical setups up to 30,000 volts), across the electrodes using devices like induction coils to generate the necessary electric field. Electrons emitted from the cathode are accelerated toward the anode, colliding with gas atoms in the process and ionizing them to produce positively charged ions. These ions, under the influence of the electric field, accelerate toward the negatively charged cathode and pass through its perforations, forming directed streams known as anode rays.^[17]^[18] The rays manifest visually as faint luminous beams extending from the cathode channels, resulting from secondary ionizations and excitations of residual gas molecules along their path. When the rays strike the glass walls of the tube, they induce fluorescence, often producing a greenish or pinkish glow depending on the gas and tube material.^[17]^[1] To ensure proper function, the low gas pressure is maintained using vacuum pumps, such as mercury-based systems like Geissler's pump, which evacuate the tube to the required level. Historical setups required careful handling of high voltages from induction coils, posing risks of electrical discharge or implosion, necessitating shielded enclosures for safe operation.^[17]^[18]

Ion sources

Ion sources for anode rays primarily rely on gas discharge mechanisms to generate positive ions within the enclosing apparatus of the discharge tube. In Eugen Goldstein's foundational experiments of 1886, anode rays—also known as canal rays—were produced in a low-pressure gas environment by applying a high voltage across electrodes, resulting in the ionization of residual gas atoms and the acceleration of the resulting positive ions toward the cathode.^[4] To observe these rays, Goldstein employed a perforated cathode, which allowed a portion of the positive ions to pass through its channels, forming visible beams and enabling higher effective ion yields compared to solid cathodes by directing and concentrating the ion stream.^[19] This setup marked the initial historical ion source for anode rays, where the discharge ionized gases such as hydrogen, producing protons (H⁺ ions) as the primary positive particles.^[4] The dominant ionization mechanism in these early anode ray sources is electron impact ionization, in which electrons emitted from the cathode are accelerated by the electric field and collide with neutral gas atoms, stripping away electrons to form positive ions.^[18] These high-energy electron-gas atom collisions occur throughout the inter-electrode space in the low-pressure discharge, sustaining the plasma and continuously generating ions that contribute to the anode ray beam. In advanced historical setups, alternative mechanisms such as thermal ionization—where heat from the discharge vaporizes and ionizes material—were occasionally employed to supplement electron impact, particularly for refractory metals, though electron impact remained the primary process for gas-based sources.^[13] Control over the types of ions produced in anode rays is achieved largely through the composition of the residual gas in the tube, as the ions reflect the atomic or molecular species present. For instance, in tubes filled with hydrogen gas, the rays consist predominantly of protons due to the ionization of H₂ molecules, while other gases yield ions corresponding to their atomic masses, such as helium ions (He⁺) in helium-filled tubes.^[4] Additionally, metal ions can be introduced via anode evaporation, where the high voltage and heat cause trace amounts of anode material to vaporize and ionize, mixing with gas ions to diversify the beam composition.^[13] Specialized chemically active anodes enhance the production of specific positive ions by coating the anode surface with salts, such as alkali metal halides like sodium chloride (NaCl). When a sufficiently high electrical potential is applied, the current dissociates the salt into positive metal ions (e.g., Na⁺) and negative halide ions (e.g., Cl⁻), with the positive ions accelerating toward the cathode to form the anode ray beam. J.J. Thomson described such setups in his experiments, noting that heating a salt-coated anode produced a bright stream of rays from the anode end, allowing targeted generation of ions from non-gaseous sources like alkali metals, which complemented gas discharge methods for more controlled ion types.

Properties

Physical characteristics

Anode rays, also known as canal rays or positive rays, consist of positively charged ions that originate near the anode in a low-pressure gas discharge tube and propagate toward the cathode. Unlike cathode rays, which are streams of electrons moving from cathode to anode, anode rays travel in the opposite direction, passing through channels or perforations in the cathode.^[2] These rays follow straight-line paths in the absence of external fields, demonstrating their corpuscular nature as discrete particles rather than electromagnetic waves. This straight-line propagation is evidenced by their ability to cast sharp shadows of objects placed in their path onto fluorescent screens, confirming their particulate behavior.^[20] The rays exhibit deflection in the presence of electric and magnetic fields due to their positive charge, with the curvature opposite to that observed for negatively charged cathode rays. In electric fields, anode rays are deflected toward the negative plate, while in magnetic fields, they curve in a direction consistent with the Lorentz force on positive charges, allowing determination of their charge sign and enabling separation by mass-to-charge ratio.^[20] J.J. Thomson's experiments quantified these deflections, showing maximum displacements of about 2 cm in magnetic fields of 500 CGS units and 30,000 V accelerating potential.^[21] Anode rays produce faint luminous trails visible in the discharge tube, resulting from excitations and de-excitations of gas atoms along their path, often appearing as glowing streams behind the cathode. These rays induce fluorescence on screens, such as willemite, producing characteristic colors depending on the gas, like green for hydrogen.^[20] The ions in anode rays achieve high velocities, typically up to 3.5 × 10^6 m/s, determined by the accelerating voltage in the tube, with their kinetic energy given by

\frac{1}{2} m v^2 = e V

, where

m

is the ion mass,

v

is velocity,

e

is the elementary charge, and

V

is the potential difference.^[20] This energy arises from ionization and acceleration in the electric field of the discharge.^[2]

Dependence on gas and ions

The composition of anode rays, also known as canal rays or positive rays, is fundamentally determined by the type of gas introduced into the discharge tube, as these rays consist of positively charged ions derived from the ionization of that gas. In a tube filled with hydrogen, the rays primarily comprise H⁺ ions (protons), while neon gas yields predominantly Ne⁺ ions, and helium produces He⁺ ions.^[22] This direct dependence arises because the electric discharge ionizes the residual gas molecules, accelerating the resulting cations toward the cathode and through its perforations to form the beam.^[23] The charge-to-mass ratio (e/m) of these ions varies inversely with their atomic or molecular mass for ions bearing the same charge, leading to distinct behaviors across different gases. For instance, the e/m value is highest for hydrogen ions (approximately 9.58 × 10⁷ C/kg) compared to heavier ions like those from neon (around 4.8 × 10⁶ C/kg), reflecting the lighter mass of protons relative to neon atoms.^[25] This variation was first quantified by Wilhelm Wien in 1898 using deflection measurements, confirming that the rays carry particles with masses comparable to atoms of the gas used.^[25] Under a fixed accelerating voltage V, the velocity of the ions differs based on their mass, with lighter ions achieving higher speeds. The velocity v is given by the relation derived from kinetic energy conservation,

v = \sqrt{\frac{2qV}{m}}

v=m2qV

, where q is the ion charge and m is its mass; thus, protons from hydrogen accelerate to velocities up to about 1.4 × 10⁶ m/s at 10 kV, far exceeding those of heavier neon ions under identical conditions. This mass-dependent velocity enables separation of ion species, as observed in J.J. Thomson's experiments where rays from mixed gases produced multiple deflection patterns.^[22] The interaction of anode rays with the tube walls or residual gas induces fluorescence, the color of which is characteristic of the gas employed. Hydrogen rays produce a rose-colored glow, neon yields a brilliant red, helium a yellow, argon a violet, and air a yellowish hue, due to excitation of gas atoms by the fast-moving ions.^[22] In magnetic fields, these rays trace parabolic paths whose curvature depends on the ions' mass and velocity; lighter, faster ions like H⁺ follow tighter parabolas than heavier ones like Ne⁺ for the same charge and field strength, allowing mass-based separation as demonstrated in Thomson's parabola method.^[23] Impurities in the gas significantly alter the ray composition by introducing extraneous ion species, resulting in heterogeneous beams with mixed e/m ratios and reduced intensity. For example, trace amounts of heavier gases in a hydrogen tube can generate additional heavier ions, broadening spectral lines and complicating velocity distributions, as noted in studies of Doppler shifts in canal rays where gas purity directly impacts ray homogeneity.^[26] High-purity gases are thus essential for isolating specific ion types and achieving clear deflection patterns.^[27]

Significance

In atomic physics

Anode rays provided pivotal insights into the nature of positive charges within atoms, complementing the study of cathode rays and advancing early models of atomic structure. Discovered by Eugen Goldstein in 1886 through observations in a discharge tube with a perforated cathode, these rays consist of positively charged particles originating from ionized residual gas, traveling from the anode toward the cathode. This phenomenon demonstrated that atoms could be stripped of electrons in an electric discharge, forming positive ions that carry nearly the entire mass of the original atom, thus highlighting the process of ionization central to atomic spectra and gaseous discharge behaviors.^[1] J.J. Thomson's detailed analysis of anode rays, or positive rays, in the early 1910s further elucidated their composition and significance. By applying combined electric and magnetic fields to deflect the rays and measure their parabolic paths, Thomson determined the mass-to-charge ratios (e/m) of various ions, revealing a range of particles from different gases. Notably, the rays from hydrogen yielded the lightest ion with e/m corresponding to a single positive charge and a mass approximately equal to that of a hydrogen atom (about 1,840 times the electron mass), confirming the hydrogen nucleus as a discrete, fundamental positive particle present in all atomic nuclei. This finding established the existence of stable positive subatomic entities, distinct from the lightweight electrons identified via cathode rays.^[22] These experiments on anode rays refined conceptualizations of atomic architecture by evidencing massive positive charge carriers, challenging aspects of Thomson's 1904 plum pudding model—in which positive charge formed a uniform "pudding" embedding electrons—and bolstering Ernest Rutherford's 1911 nuclear model. Rutherford's gold foil scattering experiments, informed by the discrete nature of positive ions observed in positive ray analysis, proposed a compact, positively charged nucleus containing the atom's mass, with electrons orbiting externally. The paired examination of anode rays (heavy positive ions) and cathode rays (light negative electrons) thus revealed the fundamental duality of charged particles in matter, essential for explaining atomic neutrality and stability.^[22]

In mass spectrometry

Anode rays played a pivotal role in the early development of mass spectrometry through the work of Wilhelm Wien, who in 1898 constructed the first mass spectrograph using these rays. By passing canal rays through a magnetic field, Wien demonstrated that the ions could be deflected into parabolic paths, with the radius of curvature depending on the charge-to-mass ratio (e/m) of the particles, allowing for rudimentary separation and identification based on mass.^[28] This apparatus marked the initial application of anode rays to mass analysis, revealing that the rays consisted of positively charged ions from the residual gas in the tube, varying in velocity and mass.^[3] Building on Wien's foundation, J.J. Thomson advanced the technique with his positive ray analysis apparatus, known as the parabolometer, around 1912–1913. Thomson's setup combined electric and magnetic fields to deflect anode rays, producing distinct parabolic traces on a photographic plate that corresponded to different ion masses. In 1913, this method enabled the first experimental detection of isotopes, as Thomson observed two distinct parabolas for neon ions at masses approximately 20 and 22 atomic mass units, proving that neon existed as a mixture of isotopes rather than a single atomic species.^[22] Francis Aston significantly refined these instruments starting in 1919, developing an improved mass spectrograph that achieved higher resolution through velocity focusing, where ions of the same mass but different velocities converged on the detector. This allowed precise measurement of atomic masses to within 1 part in 1000, far surpassing Thomson's capabilities, and led to the discovery of numerous isotopes in light elements like hydrogen, helium, and carbon. Aston's advancements culminated in the formulation of the whole-number rule in 1920, stating that isotopic masses are close to whole numbers, and enabled quantitative determination of isotope abundances, such as the 90:10 ratio of neon-20 to neon-22.^[29]^[16] The anode ray-based mass spectrographs of Wien, Thomson, and Aston laid the groundwork for modern mass spectrometry by establishing ion separation via e/m ratios and photographic detection as core principles. However, these gas discharge ion sources were gradually supplanted in the mid-20th century by more efficient electron impact ionization methods, which produce controlled, high-yield ion beams from vaporized samples, enabling broader analytical applications in chemistry and biology.^[3]

Info Pages

Talk Pages

Special Pages

Anode ray

Recent from talks

Recent from talks

Contribute something

Contribute something

Media Pages

Timelines

Articles

Notes collections

Notes

Notes

Days in Chronicle

Anode ray

Anode ray tube

Anode ray ion source

See also

References

External links

Anode ray

History

Discovery

Development

Production

Anode ray tube

Ion sources

Properties

Physical characteristics

Dependence on gas and ions

Significance

In atomic physics

In mass spectrometry

References

Add your contribution

Related Hubs

Contribute something

History

Media collections

Anode ray

Recent from talks

Recent from talks

Contribute something

Contribute something

Media Pages

Timelines

Articles

Notes collections

Notes

Notes

Days in Chronicle

Anode ray

Anode ray tube

Anode ray ion source

See also

References

External links

Anode ray

History

Discovery

Development

Production

Anode ray tube

Ion sources

Properties

Physical characteristics

Dependence on gas and ions

Add your contribution

Related Hubs

Contribute something