Hubbry Logo
Chelex 100Chelex 100Main
Open search
Chelex 100
Community hub
Chelex 100
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Chelex 100
Chelex 100
Chelex 100
View on Wikipedia
from Wikipedia

Chelex 100 is a chelating material from Bio-Rad[1] used to purify other compounds via ion exchange. It is noteworthy for its ability to bind transition metal ions.

It is a styrene-divinylbenzene co-polymer containing iminodiacetic acid groups.

A concentrated solution of metals is obtained by eluting the resin with a small volume of 2 M nitric acid, which protonates the iminodiacetate groups.

Chelex resin is often used for DNA extraction in preparation for polymerase chain reaction by binding to cations including Mg2+, which is an essential cofactor for DNases. Chelex protects the sample from DNases that might remain active after the boiling and could subsequently degrade the DNA, rendering it unsuitable for PCR. After boiling, the Chelex-DNA preparation is stable and can be stored at 4°C for 3–4 months.[2] Polar resin beads bind polar cellular components after breaking open cells, while DNA and RNA remain in water solution above the Chelex resin.

However, the heating steps do denature the double helix, and the resulting single-stranded DNA is less stable in storage.

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Chelex 100

View on Grokipedia
from Grokipedia
Chelex 100 is a chelating developed by , consisting of a styrene-divinylbenzene matrix with paired iminodiacetate functional groups that selectively bind polyvalent metal ions, particularly transition metals such as , iron, and . These chelating groups form stable complexes with metal ions even in the presence of high salt concentrations, classifying it as a weak cation exchanger with exceptional selectivity—approximately 5,000:1 for divalent over monovalent cations like sodium or . Available in various particle sizes (e.g., 50–100 mesh or 200–400 mesh) and grades (analytical, , ), Chelex 100 is stable for over five years at ambient temperatures and is widely used in batch or column formats for metal removal and recovery. Introduced by Bio-Rad in the early , Chelex 100 has been employed in analysis of natural waters, reagents, biochemicals, and physiological fluids, as well as for purifying systems, culture media, and process streams by removing interfering metal contaminants. Its high affinity for transition metals enables qualitative and quantitative measurements in complex matrices, and it supports separations of related metal at controlled flow rates. In environmental and industrial applications, it facilitates the recovery of metals from waste streams and the decontamination of soils. A particularly notable application emerged in with the 1991 development of a simple, one-step method using Chelex 100 for (PCR)-based typing from forensic samples, such as bloodstains or semen. This technique involves boiling samples in a Chelex suspension to lyse cells and chelate metal ions that inhibit PCR, yielding DNA suitable for amplification without organic solvents or lengthy purification. The method's rapidity, cost-effectiveness, and minimal waste have made it a standard in forensics, clinical diagnostics, and viral RNA detection, including for , while preserving integrity.

Overview and Properties

Chemical Composition

Chelex 100 is a chelating composed of a styrene-divinylbenzene matrix with 1% crosslinkage, which provides the structural stability necessary for its beaded form and resistance to osmotic shock. This cross-linked backbone serves as the inert support onto which the active chelating groups are covalently attached, enabling the resin's selective interaction with metal ions without compromising the matrix's integrity. The primary chelating agents in Chelex 100 are paired derived from , which function as a weak cation exchanger exhibiting carboxylic acid-like behavior. These functional groups, represented as \ceR−CH2−N(CH2COOH)2\ce{R-CH2-N(CH2COOH)2} in their protonated form (where R denotes the styrene-divinylbenzene matrix), can deprotonate to \ceR−CH2−N(CH2COO−)2\ce{R-CH2-N(CH2COO-)2}, allowing coordination with polyvalent metal through the nitrogen and carboxylate oxygen atoms. This bidentate or tridentate binding capability enhances the resin's affinity for transition metals, distinguishing it from simpler ion exchangers. Chelex 100 is typically supplied in the sodium ionic form as the default, where sodium ions occupy the exchange sites, but it can be converted to other forms such as , , or iron for specialized applications requiring adjusted or selectivity. Manufactured by , the resin is available in multiple grades differentiated by purity and suitability: analytical grade for precise analysis, grade with low microbial content (<100 microorganisms/g), and grade free of nucleases and PCR inhibitors to support downstream work.

Physical and Functional Characteristics

Chelex 100 resin is available in several ranges, including 50–100 (dry, approximately 300–1180 µm wet bead size), 100–200 (150–300 µm wet), and 200–400 (75–150 µm wet), which influence flow rates and resolution in column applications, with finer meshes providing higher surface area but potentially slower flow. The resin exhibits a nominal density of 0.65 g/ml on a wet basis and has a minimum ion exchange capacity of 0.4 meq/ml (wet basis, defined by Cu(NH₃)₄²⁺ uptake in the sodium form), alongside a molecular weight exclusion limit of approximately 3,500 Da, allowing it to effectively chelate polyvalent ions while excluding larger molecules. Chelex 100 demonstrates broad stability from 0 to 14, with operational functionality typically in the range of 4 to 14, and temperature stability up to 80°C for extended exposures in certain conditions or short-term (as in autoclaving the sodium form at 121°C), enabling robust performance in diverse laboratory protocols. The is supplied in both dry and pre-hydrated () forms, with sodium ions serving as the standard counterions, facilitating easy handling and immediate use in hydrated applications.

History and Development

Invention and Commercialization

Chelex 100 was developed by in the early 1960s as a high-purity chelating specifically tailored for analysis in environmental and applications. Building on earlier chelating resins such as Dowex A-1, which was introduced by based on a 1959 for iminodiacetic acid-functionalized styrene-divinylbenzene copolymers, 's division refined the material to enhance its selectivity and purity for use. The resin's initial production emphasized its role in removing and concentrating polyvalent metal ions from complex matrices, addressing needs in testing and geochemical studies, with first commercial availability occurring in the early . Early highlights its effectiveness in preconcentrating trace elements like and from , demonstrating superior performance over standard cation exchangers due to its iminodiacetate chelating groups. Bio-Rad trademarked Chelex 100 and focused on analytical-grade variants suitable for high-resolution protocols in trace analysis. Over time, Bio-Rad progressively introduced specialized grades to meet evolving demands, including analytical-grade resins optimized for work by the 1970s and molecular biology-grade versions by the 1990s to support purification by minimizing contamination. Manufacturing processes for these resins adhere to international standards, with Bio-Rad's facilities certified under :2016 for in the , development, and production of laboratory and materials.

Key Milestones in Usage

In the late and , Chelex 100 saw its initial practical applications in environmental analysis, particularly for the preconcentration of trace metals from . Pioneering work by Riley and Taylor in 1968 demonstrated the resin's utility in selectively binding and concentrating ions such as , , , and lead, enabling their detection at ultratrace levels through atomic absorption . This approach addressed challenges in analyzing low-concentration metals in high-salinity matrices, marking the resin's early adoption in and setting the stage for its broader use in assessment. A significant expansion into occurred in 1991, when Walsh et al. introduced a simple boiling-based protocol using Chelex 100 for rapid from forensic samples, such as bloodstains and . This method, published in BioTechniques, leveraged the resin's chelating properties to inactivate nucleases and release DNA suitable for PCR amplification, revolutionizing in forensics by minimizing handling steps and contamination risks. During the 2000s, Chelex 100 gained widespread adoption for PCR optimization across diverse biological samples, including tissues and microorganisms, due to its speed and cost-effectiveness in nucleic acid preparation. By the early 2020s, this extended to viral RNA extraction, notably in protocols for SARS-CoV-2 detection during the COVID-19 pandemic, where extraction-free methods using the resin preserved RNA integrity for direct RT-qPCR, facilitating high-throughput testing in resource-limited settings. In the 2010s, innovations included the 2011 patent by Xiong et al. for an improved Chelex-based method to extract genomic DNA from animal tissues, enhancing yield and purity for downstream applications like genotyping. Concurrently, the resin's environmental applications broadened to wastewater treatment, with studies such as Amara et al. (2015) demonstrating efficient removal of Cd(II) and Hg(II) ions through batch adsorption, achieving over 95% extraction efficiency under optimized pH conditions. In the , optimizations have emphasized scalability and accessibility, such as Simon et al.'s (2020) refined protocol for extracting high-quality genomic from dried blood spots using minimal resin volumes, supporting and epidemiological studies in low-resource areas. Similarly, Yang et al. (2024) adapted Chelex 100 for rapid DNA isolation from tissues, enabling sensitive PCR detection of pathogens like white spot syndrome , which underscores its role in diagnostics with low-cost, field-deployable workflows.

Mechanism of Action

Chelating Process

The chelating process of Chelex 100 begins with the iminodiacetate (IDA) functional groups attached to a matrix, which are initially protonated at low . As the rises above 4, these groups undergo , transitioning to a deprotonated form featuring a neutral tertiary nitrogen and two negatively charged groups, enabling coordination to metal ions. This is crucial for activating the , as binding capacity remains negligible below 2 but increases significantly in neutral to basic conditions ( 4–14). Once deprotonated, the IDA groups form stable octahedral coordination complexes with polyvalent metal ions, such as Cu²⁺ and Fe²⁺/³⁺, through tridentate binding involving the tertiary and two oxygen atoms from the moieties; the octahedral is completed by molecules or adjacent oxygens. The swells in aqueous media, allowing metal ions to access the functional groups and form these complexes via , which replaces the resin's alkali counterions (e.g., Na⁺). This process can occur in batch mode, where the is mixed with the sample solution and stirred for equilibration (typically 1 hour), or in column mode, where the sample flows through a of beads (50–100 for faster flow or 200–400 for finer resolution), with the influencing efficiency but not altering the core coordination mechanism. Equilibrium dynamics favor high loading capacities at neutral , reaching up to 0.4 meq/ml for transition metals, due to favorable binding constants that prioritize polyvalent cations even in high-salt environments. In purification applications, this selective removes interfering metal ions from solutions containing non-metallic components like buffers, without disrupting the latter. For ion release, elution employs strong acids such as 1–2 M nitric or , which protonate the IDA groups, destabilizing the complexes and liberating the metals into solution. regeneration follows a two-step cycle: treatment with dilute acid (e.g., 1 N HCl) to remove bound metals, followed by 1 N NaOH to restore the sodium form, with intermediate water rinses to neutralize ; this process allows repeated use while maintaining chelating efficiency.

Ion Selectivity and Binding

Chelex 100 demonstrates exceptional selectivity for ions, particularly divalents, over monovalent cations, with a ratio of approximately 5,000:1 for ions like Cu²⁺ and Fe²⁺ relative to Na⁺. This preference arises from the chelating action of its iminodiacetate groups, which form stable octahedral complexes with s through nitrogen and coordination. Among s, the exhibits the highest affinity for Cu²⁺ (relative selectivity of 126 compared to Zn²⁺ = 1 at pH 4), followed by Ni²⁺ (4.40), Co²⁺ (0.615), and Fe²⁺ (0.13), while Fe³⁺ shows even stronger binding due to its higher . Softer Lewis acids like Pb²⁺ have lower affinity (3.88 relative to Zn²⁺), resulting in reduced binding efficiency compared to harder s. The binding efficiency of Chelex 100 is highly pH-dependent, with optimal uptake of transition metals occurring between 5 and 8, where the iminodiacetate groups are predominantly deprotonated and available for coordination. Below 4, protonation of the carboxylate moieties reduces the resin's capacity, as the functional groups compete with H⁺ ions, leading to sharply diminished exchange—often near zero below 2. This pH sensitivity allows selective isolation of metals under controlled conditions but requires adjustment to avoid proton competition. High concentrations of alkaline earth metals like Ca²⁺ or Mg²⁺ can interfere with binding by competing for sites, given their lower but non-negligible selectivities (Ca²⁺ at 0.013 and Mg²⁺ similarly low relative to Zn²⁺). Binding capacities vary by , reaching up to 0.6 meq/g dry for heavy transition metals like Cu²⁺ under optimal conditions, though values are lower for softer acids such as Pb²⁺ due to weaker complex stability.

Applications

In Molecular Biology

In molecular biology, Chelex 100 is widely employed for the rapid extraction of nucleic acids from biological samples, particularly in protocols designed for polymerase chain reaction (PCR) amplification. The standard DNA extraction method involves suspending the sample in a 5% (w/v) Chelex 100 resin solution, followed by boiling at 100°C for 10–15 minutes; this heat lysis disrupts cell membranes to release DNA while the resin's iminodiacetate groups chelate divalent cations such as Mg²⁺ and Ca²⁺, thereby inhibiting magnesium- and calcium-dependent DNases that could degrade the nucleic acids. This chelation process occurs via the resin's high affinity for polyvalent metal ions, effectively sequestering them without requiring enzymatic digestion or phenol-chloroform extraction. The resulting supernatant contains single-stranded DNA (ssDNA), which is well-suited for direct use in PCR due to its denatured state aligning with the initial denaturation step of the reaction; the Chelex-bound metals prevent reannealing and ongoing nuclease activity, preserving integrity during short-term storage at 4°C for up to 3–4 months. This method yields DNA concentrations typically ranging from 50–200 ng/µL, depending on sample type and volume, with high purity achieved by removal of metallo-nucleases and absence of organic solvent contaminants, enabling reliable downstream amplification without additional cleanup. Applications of Chelex 100 in molecular biology span diverse sample types, including forensic materials such as bloodstains and semen, where it facilitates PCR-based genotyping from minute quantities. It is also effective for extracting DNA from dried blood spots in epidemiological studies, providing sufficient material for malaria parasite detection via PCR. For viral diagnostics, the resin supports extraction-free RNA preparation from SARS-CoV-2-infected samples, allowing sensitive RT-qPCR detection by stabilizing RNA against degradation in transport media. Additionally, Chelex 100 enables efficient isolation of bacterial and fungal DNA from complex tissues, such as shrimp muscle or hepatopancreas for pathogen identification, and filamentous fungi for taxonomic PCR assays. The extracted ssDNA is compatible with direct addition to PCR reactions, often requiring only 1–5 µL of supernatant as template, which streamlines workflows in high-throughput settings; however, the single-stranded nature increases susceptibility to mechanical shearing during pipetting or vortexing, potentially reducing template length for longer amplicons.

In Environmental and Industrial Analysis

Chelex 100 is widely employed in environmental analysis for the preconcentration of trace metals from complex aqueous matrices such as and river water, enabling sensitive detection of elements including (Cu), (Cd), mercury (Hg), palladium (Pd), platinum (Pt), and gold (Au). In these applications, the resin is typically packed into columns where water samples are passed through at a controlled (often around 5–8) to selectively bind the target metals, followed by elution with dilute acid for subsequent analysis via techniques like (ICP-MS) or (NAA). For instance, on-line preconcentration using Chelex 100 columns has achieved detection limits as low as 0.01–0.1 ng/L for multiple trace elements in , with recovery rates exceeding 95% in covering freshwater, brackish, and marine samples. In , Chelex 100 facilitates the removal of through batch or column-based processes at near-ambient levels (typically 5–6), where it demonstrates high efficiency for ions such as Cd(II) and Hg(II). Studies have reported removal efficiencies greater than 90%, with up to 97% extraction for Cd(II) and Hg(II) from synthetic and industrial effluents using batch equilibration with 5 g of resin per 100 mL of sample, minimizing the need for pH adjustment and enabling straightforward regeneration. This approach is particularly valuable for treating industrial wastewaters contaminated with Cu, Cd, and Cr, where the resin's selectivity reduces matrix interferences and supports compliance with environmental discharge standards. For industrial applications, Chelex 100 serves as a chelating agent in the purification of reagents and biochemicals by selectively removing trace heavy metal contaminants that could interfere with processes like assays or synthesis. In protein , the resin effectively strips divalent cations (e.g., Cu²⁺, Fe²⁺, Zn²⁺) from protein solutions without denaturing the biomolecules, preserving enzymatic activity while achieving near-complete removal in buffers or culture media. Its use in these contexts highlights its role in enhancing product purity, as demonstrated in large-scale cleanups where it maintains selectivity even in the presence of high salt concentrations. In the analysis of geological samples, Chelex 100 enables the separation and quantitative determination of noble metals such as Pd, Pt, and Au by preconcentrating them from digested rock or matrices prior to NAA or other spectroscopic methods. The resin's iminodiacetate functional groups provide strong binding affinity for these elements under mildly acidic conditions, allowing isolation from interfering major elements like iron and aluminum, with reported recoveries of 90–100% in spiked geological reference materials. This method is instrumental in geochemical prospecting and resource evaluation. For industrial-scale operations, Chelex 100 can be scaled up using larger column volumes or the related Chelex 20 variant, which supports high-throughput in processes treating liters to cubic meters of solution while retaining a capacity of approximately 0.4 meq/mL for transition metals. The resin undergoes efficient regeneration via sequential treatment with 1 N HCl (2 volumes) followed by 1 N NaOH (2 volumes), allowing over multiple cycles without significant capacity loss, though exact cycle limits depend on application-specific conditions. This regenerability makes it suitable for continuous systems in and metal recovery plants.

Preparation and Usage Protocols

Resin Preparation

Chelex 100 , supplied in a moist sodium form, requires initial preparation to form a workable suspension for use. To the , prepare a 5–6% w/v suspension by adding the appropriate amount of to sterile or Tris-EDTA ( (pH 8.0), typically stirring or vortexing to ensure even distribution and allowing it to swell. The undergoes approximately 100% increase when transitioning from the hydrogen form to a monovalent salt form, such as sodium, due to the hydrophilic styrene-divinylbenzene matrix. Cleaning the resin involves washing to remove manufacturing residues or contaminants. A common procedure is to wash the suspension three times with or deionized water by decanting or , ensuring the supernatant is clear before final resuspension. For more thorough , treat with 1 N HCl (approximately 2 bed volumes for column formats), followed by rinsing with 5 bed volumes of deionized water to neutralize and remove acid-soluble impurities; prolonged exposure to acid should be avoided to prevent capacity loss. Conversion to specific ionic forms is achieved through sequential chemical treatments. To obtain the H⁺ form, pass 2 bed volumes of 1 N HCl through the bed or suspension, then rinse thoroughly with . For the Na⁺ form (standard supplied form), first convert to H⁺ as above, then treat with 2 bed volumes of 1 N NaOH, followed by 5 bed volumes of rinse to adjust to neutral. Always use precautions like taping columns to accommodate swelling. Hydrated resin suspensions should be stored at 4°C in a low-ionic-strength solution like 0.1 M NaCl to maintain stability and prevent drying or microbial growth, with a shelf life of 1–2 years when properly sealed. Dry or original moist resin can be stored at room temperature (22°C) in its sealed container for up to 2 years in the sodium or ammonium salt form. For biotechnology or molecular biology grade Chelex 100, additional precautions ensure sterility for nucleic acid applications: prepare suspensions using sterile-filtered water or buffer (0.22 μm filter), and handle under aseptic conditions to avoid nuclease contamination. This grade is particularly suited for PCR and RT-qPCR workflows, where purity is critical.

Common Extraction and Purification Methods

Chelex 100 is commonly employed in batch extraction protocols for isolating DNA from biological samples, particularly in forensic and molecular biology applications. A standard procedure involves preparing a 5% (w/v) suspension of Chelex 100 resin in deionized water, adding the sample to achieve a final resin concentration of 5–10% (w/v), and boiling the mixture at 100°C for 10 minutes to lyse cells and release nucleic acids while the resin chelates inhibitory divalent cations such as Mg²⁺. Following incubation, the sample is centrifuged at 12,000–16,000 × g for 3–5 minutes to pellet the resin and debris, with the resulting supernatant containing the purified DNA ready for downstream applications like PCR. This method yields single-stranded DNA suitable for amplification, with the chelating action during boiling preventing nuclease activity. For metal ion removal in column mode, Chelex 100 is packed into a chromatography column after slurrying the resin in a buffer at pH 5–8 to optimize binding of divalent and trivalent cations. The sample is loaded onto the column at a flow rate of 1–2 ml/min, followed by washing with 5–10 bed volumes of the same buffer to remove unbound material. Bound metals are then eluted using 2 bed volumes of 2 M nitric acid (HNO₃) or 1 M hydrochloric acid (HCl), collecting fractions for analysis. This approach achieves high efficiency for trace metal purification in aqueous solutions, with resin capacity typically around 0.4 meq/ml in the sodium form. In batch mode for buffer or solution purification, 1–5% (w/v) Chelex 100 resin is added directly to the target solution, which is then stirred gently at room temperature for 1 hour to allow chelation of contaminating metals. The mixture is filtered or decanted to remove the resin beads, yielding a metal-depleted supernatant; for enhanced purity, the process can be repeated with fresh resin. This simple technique is widely used to prepare metal-free buffers for sensitive enzymatic reactions. Variations adapt these protocols to specific sample types. For viral RNA extraction, a 6% (w/v) suspension of Chelex 100 is mixed with the sample in lysis buffer or transport medium (e.g., 50 µl each), heated at 95°C for 10 minutes, and centrifuged, with the supernatant used for RT-PCR; this inhibits RNases by cation chelation without full extraction kits. In wastewater analysis, higher resin loading (up to 10% w/v) is applied in batch mode with multiple equilibration cycles—stirring, decanting, and reusing resin after acid stripping—to handle elevated metal loads, often at pH 6–8 for optimal recovery. Safety precautions are essential, particularly when eluting bound metals with strong acids: perform acid handling in a to avoid of fumes, and dispose of and eluates as per local regulations due to potential heavy metal content.

Advantages and Limitations

Benefits Over Alternatives

Chelex 100 offers significant cost-effectiveness compared to commercial kits, with extraction costs ranging from $0.01 to $0.05 per sample versus $1 to $5 for kits, primarily due to its reliance on a simple suspension without requiring enzymes, organic solvents, or specialized equipment. This approach reduces material expenses by factors of up to 170 while minimizing waste generation. The resin enables a streamlined, single-tube process that simplifies DNA preparation, completing extractions in 15 to 30 minutes through and , in contrast to the multi-step phenol-chloroform method that often requires several hours. This rapidity stems from direct sample in the resin suspension, eliminating the need for phase separations or extensive purification steps. Chelex 100 demonstrates broad versatility, operating effectively across a pH range of 4 to 14, which accommodates diverse sample matrices without compromising resin integrity. Its boiling-based protocol is particularly advantageous for heat-labile biological samples, as it inactivates nucleases via metal chelation while preserving nucleic acid integrity for downstream applications like PCR. In terms of specificity, Chelex 100 selectively binds polyvalent ions, such as , iron, and magnesium, to remove them without broadly chelating monovalent ions or denaturing proteins and DNA, unlike EDTA, which forms stable complexes with a wider array of metals and can interfere with enzymatic reactions. This targeted action reduces non-specific binding and enhances sample purity for sensitive analyses. The scalability of Chelex 100 extends from laboratory microgram-scale preparations to industrial kilogram quantities, making it suitable for large-volume where it efficiently removes from effluents. This adaptability supports both routine forensic and as well as high-throughput industrial processes.

Potential Drawbacks and Mitigations

One notable limitation of Chelex 100 in is the production of single-stranded DNA (ssDNA), which is more prone to shearing, particularly during repeated freeze-thaw cycles due to formation. This shearing can compromise DNA integrity for downstream applications requiring high-quality templates. To mitigate this, gentle handling is essential, such as storing extracts at -80°C and limiting freeze-thaw cycles to no more than 20, which has been shown to maintain DNA stability without significant degradation. Chelex 100 extraction often results in variable DNA yields, with efficiencies around 54% in standard protocols from blood spots, and lower yields in challenging samples like those with high lipid content or compromised tissues, where lysis inefficiencies can reduce recovery to below optimal levels. In lipid-rich tissues, the resin's chelating action may not fully disrupt fatty matrices, leading to incomplete cell lysis and reduced DNA release. Mitigations include pre-lysis steps or combining the method with proteinase K digestion, which enhances protein degradation and improves yields by facilitating better access to nucleic acids in complex samples. For instance, adding proteinase K prior to boiling can increase extraction efficiency in fatty or fibrous tissues by breaking down protective barriers. The reusability of Chelex 100 is limited by from accumulated and metals after multiple cycles, typically requiring regeneration to restore capacity. occurs as bound contaminants reduce available chelating sites, diminishing performance. Regeneration involves alternating washes with 1 N HCl to convert to the form and 1 N NaOH to the sodium form, followed by thorough rinsing, which can extend usability but requires careful monitoring to avoid incomplete cleaning. Residual Chelex 100 particles in the eluate can interfere with downstream assays, such as PCR, by chelating essential divalent cations like Mg²⁺ or physically obstructing enzymatic reactions. This inhibition arises from incomplete separation of the beads, leading to carryover in the supernatant. To address this, high-speed at 12,000 g for 5–10 minutes effectively pellets the resin, allowing collection of a cleaner supernatant; alternatively, through 0.45 µm membranes can remove particulates while preserving DNA integrity. Acid elution in Chelex 100 protocols generates acidic waste containing desorbed metals and chelates, raising environmental concerns due to potential heavy metal release if not properly managed. Mitigations include using dilute acids (e.g., 0.1–1 N HCl) to minimize chemical volume and , or the eluate through neutralization and steps to recover metals before disposal. Compared to traditional kits, Chelex methods inherently produce less overall waste, but adherence to these practices ensures compliance with environmental standards. In overloaded samples, the resin's binding capacity of approximately 0.40 meq/ml can be exceeded, resulting in incomplete metal chelation or DNA protection.

References

  1. https://www.bio-rad.com/en-us/product/chelex-100-resin?ID=6448ab3e-b96a-4162-9124-7b7d2330288e
  2. https://www.bio-rad.com/webroot/web/pdf/psd/literature/Bulletin_6908.pdf
  3. https://apps.dtic.mil/sti/tr/pdf/AD0407600.pdf
  4. https://pubmed.ncbi.nlm.nih.gov/1867860/
  5. https://pmc.ncbi.nlm.nih.gov/articles/PMC8349732/
  6. https://www.bio-rad.com/webroot/web/pdf/lsr/literature/LIT200.pdf
  7. https://www.sigmaaldrich.com/US/en/product/sigma/c7901
  8. https://aslopubs.onlinelibrary.wiley.com/doi/pdf/10.4319/lo.1970.15.3.0486
  9. https://patents.google.com/patent/US2910445A/en
  10. https://www.bio-rad.com/en-us/about/our-history?ID=1757378124555
  11. https://www.bio-rad.com/en-us/product/chelex-100-molecular-biology-grade-resin?ID=bd6fd35e-c8ff-4515-9499-8af8ccbb3ca5
  12. https://www.bio-rad.com/en-us/feature/quality-management-systems-certificates.html
  13. https://www.bio-rad.com/webroot/web/pdf/lsr/literature/ISO_13485_2016_Certificate_08_July_2021.pdf
  14. https://www.sciencedirect.com/science/article/abs/pii/0011747168900099
  15. https://www.bio-rad.com/en-us/feature/Chelex-100-Resin-for-Viral-RNA-Preparation-for-COVID-19-Detection.html
  16. http://www.orientjchem.org/vol31no1/removal-of-cd-ii-and-hgii-by-chelating-resin-chelex-100/
  17. https://pubmed.ncbi.nlm.nih.gov/32665976/
  18. https://www.ejbiotechnology.info/index.php/ejbiotechnology/article/view/2391
  19. https://www.sciencedirect.com/science/article/abs/pii/0022190279801542
  20. https://pmc.ncbi.nlm.nih.gov/articles/PMC2882573/
  21. https://www.sciencedirect.com/science/article/abs/pii/S1381514898000820
  22. https://biologicalproceduresonline.biomedcentral.com/articles/10.1186/s12575-018-0077-6
  23. https://pmc.ncbi.nlm.nih.gov/articles/PMC6667532/
  24. https://pmc.ncbi.nlm.nih.gov/articles/PMC5984428/
  25. https://pubmed.ncbi.nlm.nih.gov/30446959/
  26. https://www.sciencedirect.com/science/article/pii/S0717345824000125
  27. https://pmc.ncbi.nlm.nih.gov/articles/PMC8790498/
  28. https://pmc.ncbi.nlm.nih.gov/articles/PMC7334876/
  29. https://www.researchgate.net/publication/278742107_Trace_elements_determination_in_seawater_by_ICP-MS_with_on-line_pre-concentration_on_a_Chelex-100_column_using_a_%27standard%27_instrument_setup
  30. https://onlinelibrary.wiley.com/doi/10.1111/ggr.12422
  31. https://www.sciencedirect.com/science/article/pii/S1944398624177247
  32. https://www.researchgate.net/publication/286837630_Application_of_Chelex_100_ion_exchange_resin_for_separation_and_determination_of_palladium_platinum_and_gold_in_geological_and_industrial_materials_by_neutron_activation_analysis
  33. https://inis.iaea.org/collection/NCLCollectionStore/_Public/31/047/31047606.pdf
  34. https://www.sigmaaldrich.com/US/en/technical-documents/protocol/genomics/dna-and-rna-purification/whatman-reliable-extraction-of-dna
  35. https://www.bio-rad.com/sites/default/files/2022-06/Bulletin_3318.pdf
  36. https://nij.ojp.gov/nij-hosted-online-training-courses/dna-extraction-and-quantitation-forensic-analysts/chelexr-100-extraction/chelexr-100-extraction-process
  37. https://www.bio-rad.com/sites/default/files/2022-06/Bulletin_3356.pdf
  38. https://clpmag.com/disease-states/infectious-diseases/covid-19/an-alternative-to-rna-extraction-kits/
  39. https://www.bioradiations.com/viral-rna-preparation-for-molecular-pathogen-detection-a-new-application-for-chelex-100-resin-and-instagene-matrix-122/
  40. https://www.tandfonline.com/doi/full/10.2144/000114018
  41. https://danielbruzzese.wordpress.com/2016/01/15/modified-cheelex-and-proteinase-k-extraction-protocol/
  42. https://pubmed.ncbi.nlm.nih.gov/8027368/
  43. https://www.researchgate.net/publication/12306036_An_evaluation_of_chelex-based_DNA_purification_protocols_for_the_typing_of_lactic_acid_bacteria
Add your contribution
Related Hubs
User Avatar
No comments yet.