Community hub
0 subscribers7 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to Chevrolet L78.
Nothing was collected or created yet.
Chevrolet L78
View on Wikipediafrom Wikipedia
 | This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. (April 2019) |
 L78 | |
|---|---|
 L78 air-cleaner decal | |
| Layout | |
| Configuration | Naturally aspirated 90° V8 |
| Displacement | 396–402 cu in (6.5–6.6 L) |
| Cylinder bore | 4.094 in (104.0 mm) 4.126 in (104.8 mm) |
| Piston stroke | 3.76 in (95.5 mm) |
| Cylinder block material | Cast iron |
| Cylinder head material | Cast iron, Aluminum |
| Valvetrain | OHV 2 valves x cyl. |
| Combustion | |
| Fuel system | Carburetor |
| Fuel type | Gasoline |
| Cooling system | Water-cooled |
| Output | |
| Power output | 375–425 hp (280–317 kW) |
The L78 was a big-block engine produced by Chevrolet between 1965 and 1970. Rated at 425 hp (317 kW) for its first year, the rating dropped to 375 hp (280 kW) in subsequent years (although there was no change in power). Between 1966 and 1969 it was the most powerful Regular Production Option engine available in Chevrolet's intermediate line, making it a highly-collectible muscle car engine today.
History
[edit]The second-generation Chevrolet big-block engine was introduced at the 1963 Daytona 500 as the Mark II. It entered production in mid-1965 as the Mark IV 396 cu in (6.5 L) "Turbo-Jet," phasing out the first-generation W-series big-block. In its first year, the 396 was available as the L78 option in Corvettes and full-sized (Impala, Bel Air, Biscayne) models, and as the L37 in the intermediate (Chevelle) model. These engines differed only in that the L78 had a solid-lifter camshaft, while the L37 had a hydraulic lifter cam shaft.
In 1966 the L78 was available exclusively in the intermediate line. For 1967 the engine was additionally available in Chevrolet's new pony car, the Camaro. The following year the motor became available in the compact Chevy II as well.
For the 1970 model year the 396 was bored 0.03 in (0.76 mm), resulting in a 402 cu in (6.6 L) engine. Despite this, the motor was still badged as a 396. 1970 was also the final production year for the L78. Although 1970 LS6 Chevelles are generally more collectible today, 1970 L78 Chevelles are in fact rarer (4,475 units versus 2,144).
Between 1966 and 1969 the L78 was the highest-horsepower engine available in Chevrolet's intermediate line via a Regular Production Option (RPO). (For 1969 an L72 427 cu in (7.0 L), 425 hp (317 kW) engine could be ordered in an intermediate via a Central Office Production Order (COPO), bypassing a rule wherein intermediate models were restricted to engines with displacements under 400 cu in (6.6 L).)
L89
[edit]A version of the L78 was also produced with aluminum cylinder heads and sold as RPO L89. This option did not change performance, but reduced engine weight by roughly 75 lb (34 kg). This engine was available from 1968 to 1970.
Production numbers
[edit]L78
[edit]| Full (Impala, Bel Air, Biscayne) | Intermediate (Chevelle, El Camino) | Compact (Chevy II, Nova) | Pony (Camaro) | Sports (Corvette) | |
| 1965 | 1,838 | 2,157 | |||
| 1966 | 3,099 | ||||
| 1967 | 612 | 1,138* | |||
| 1968 | 4,751 | 667 | 4,575** | ||
| 1969 | 9,486 | 4,951 | 4,889 | ||
| 1970 | 2,144 | 3,765 | 600 |
- * 54 of these were converted into L72 Yenko Super Camaros.
- ** 64 of these were converted into L72 Yenko Super Camaros.
L78/L89
[edit]| Intermediate (Chevelle, El Camino) | Compact (Chevy II, Nova) | Pony (Camaro) | |
| 1968 | 272 | ||
| 1969 | 400 | 311 | |
| 1970 | 18 |
References
[edit]- DeMauro, Thomas A. "Simultaneous Combustion - 1967 Chevrolet Chevelle SS L78: How a 1967 Chevelle SS L78 396/375-hp tribute project led to restoring a numbers-matching original--at the same time." In Hemmings Muscle Machines. August 2014.
- Niedermeyer, Paul. "1965 Chevelle SS396 Z16: 201 Built, And A Common 396 Engine Misunderstanding Finally Resolved." In Cubside Classic Online. http://www.curbsideclassic.com/blog/1965-chevelle-ss396-z16-201-built-and-a-common-396-engine-misunderstanding-resolved/.
- Zazarine, Paul. "1969 L78 SS396 Chevelle - The Factory's Fastest." In Super Chevy Online. http://www.superchevy.com/features/sucs-0732-1969-chevelle-l78/.
Chevrolet L78
View on Grokipediafrom Grokipedia
Overview and Specifications
Engine Design
The Chevrolet L78 engine belongs to the Mark IV big-block V8 family, which General Motors introduced in 1965 as a high-performance evolution of earlier big-block designs, featuring a 396-cubic-inch displacement achieved through a 4.094-inch bore and 3.760-inch stroke.[7][8] In 1970, Chevrolet increased the bore to 4.126 inches to reach 402 cubic inches while continuing to badge it as a 396 for marketing consistency.[9][10] The standard L78 utilized a cast-iron engine block and cast-iron cylinder heads, providing robust durability for high-revving applications with rectangular intake ports to enhance airflow.[5][1] Key internal components included a forged steel crankshaft, forged steel connecting rods, and forged aluminum pistons designed to withstand elevated stresses.[1] The valvetrain employed solid lifters for precise valve timing at high speeds, paired with an 11.0:1 compression ratio and a high-flow aluminum intake manifold to optimize volumetric efficiency.[1] Fuel delivery was handled by a Holley 4150-series carburetor rated at 780 cubic feet per minute.[3]Performance Characteristics
The Chevrolet L78 engine was initially rated by the factory at 425 horsepower at 6,400 rpm and 415 lb-ft of torque at 4,000 rpm when introduced in 1965. From 1966 onward, Chevrolet conservatively rated it at 375 horsepower at 5,600 rpm and 415 lb-ft of torque at 3,600 rpm, despite no changes to the engine's internal components.[11][12][4] The L78's 11.0:1 compression ratio played a key role in its performance profile, enabling strong power delivery at elevated RPMs and contributing to its reputation as a high-revving powerplant suited for aggressive driving. Independent dynamometer testing of stock configurations has consistently revealed outputs surpassing factory claims; for instance, a rebuilt 1969 L78 with period-correct components and stock cast-iron exhaust manifolds produced 425 horsepower at 5,800 rpm and 445 lb-ft of torque at 3,600 rpm.[13][14][3] Due to its elevated compression and solid-lifter valvetrain, the L78 required premium fuel with at least 91 octane to avoid detonation under load. This setup emphasized performance over efficiency, resulting in typical fuel economy figures of 10-12 mpg in city driving and up to 15 mpg on highways when equipped in intermediate models. Prior to the 1970 Clean Air Act, the engine featured minimal emissions tuning—limited to basic positive crankcase ventilation—prioritizing unrestricted power output without catalytic converters or advanced controls.[15][5]History
Development and Introduction
The Chevrolet L78 engine originated as part of the Mark IV 396 Turbo-Jet program, initiated in the early 1960s by Chevrolet engineers to develop a new big-block V8 family capable of rivaling Ford's high-output 427 and Chrysler's 426 Hemi engines in the escalating muscle car competition.[16][13] This effort built on lessons from prior W-series big-blocks like the 348 and 409, as well as experimental racing projects such as the 1963 Mystery Mark II 427, incorporating canted-valve "porcupine" cylinder heads for superior airflow and a robust block design with 4.840-inch bore spacing.[16][2] The program addressed the growing demand for powerful, factory-produced performance engines in an era before stringent emissions regulations, allowing design freedoms focused on raw output and durability for street and drag strip use.[13] Development progressed rapidly under Chevrolet's engineering staff, with the L78 variant emerging as the high-performance iteration of the 396, featuring forged components like a Tuff-Trided crankshaft, four-bolt main bearing caps, and a solid-lifter camshaft for aggressive valve timing.[2] Testing milestones included dyno validation of the engine's tuning, culminating in its mid-1965 debut as Regular Production Option (RPO) L78 in the Corvette Sting Ray, where it was offered for an additional $292.63 to meet homologation needs for racing series like NASCAR and NHRA, despite GM's internal policy restricting engines over 400 cubic inches to full-size cars until 1966.[16][17] The initial gross rating of 425 horsepower at 6,400 rpm stemmed from its 11.0:1 compression ratio, large rectangular-port heads, and Holley four-barrel carburetor setup, optimized for high-revving performance without the constraints of later emissions controls.[2][13] Marketed aggressively by Chevrolet as the pinnacle of factory muscle for 1965, the L78 powered select Corvettes and full-size models like the Impala SS, positioning it as the brand's ultimate street-legal powerhouse amid the pre-emissions muscle car boom.[16][13]Production Timeline
The Chevrolet L78 engine underwent a power rating adjustment in 1966, dropping from its initial 425 horsepower to 375 horsepower, while expanding its availability beyond the Corvette to include the Chevelle SS and full-size Chevrolet models.[16][18] This change aligned with broader industry trends toward conservative gross horsepower ratings to mitigate insurance and regulatory scrutiny, though the engine's underlying design remained consistent.[3] In 1967 and 1968, the L78 saw further model expansions, becoming available in the Camaro SS starting with the 1967 model year and extending to the Nova and Chevy II platforms in 1968.[18][19] During this period, the rare L89 aluminum-head option was offered for the L78, available in limited numbers primarily in Corvette, Camaro, and Chevelle applications.[18] These additions broadened the L78's presence across Chevrolet's intermediate and pony car lines, reflecting growing demand for high-performance big-block options. By 1969, the L78 continued in SS-equipped models like the Chevelle, Camaro, and Nova, maintaining the 375 horsepower rating and solid-lifter configuration, ensuring compatibility with existing SS packages.[20][19] The 1970 model year marked the L78's final production run, with a subtle engineering update increasing displacement to 402 cubic inches via a larger bore while retaining the "396" badging to preserve market appeal and avoid potential insurance rate increases associated with larger engines.[20][19] It featured significantly reduced availability as Chevrolet prepared for stricter emissions standards and transitioned to the 454-cubic-inch LS5 and LS6 engines in SS models.[21][20] Output tapered off by the end of the year, culminating in the engine's phase-out, though the 402-cubic-inch version persisted under the L78 designation in limited Chevelle and Camaro applications. Throughout its production, the L78 was primarily assembled at the Tonawanda Engine plant in New York, Chevrolet's key facility for big-block V8s.[22][23]Variants
Standard L78
The Standard L78 engine utilized cast iron cylinder heads with large rectangular intake ports, enabling superior airflow compared to the oval ports on lower-output 396 variants like the L34 and L35.[3] These heads contributed to the engine's baseline compression ratio of 11.0:1, paired with forged pistons and a robust bottom end featuring a forged crankshaft and four-bolt main bearing caps.[7] The valvetrain employed solid lifters operated by a high-performance camshaft profile delivering 0.496-inch intake and 0.492-inch exhaust valve lift (including lash), providing more aggressive timing and higher lift than the hydraulic camshafts in the L34 (350 hp) and L35 (325 hp) engines, which prioritized smoother operation over peak power.[24] The intake system featured a dual-plane aluminum manifold matched to the rectangular ports for balanced low- and high-rpm performance, while the exhaust setup included large ports and dual exhaust as standard equipment on SS models, enhancing scavenging efficiency over the single exhaust on base 396 configurations.[3] Accessory drive compatibility was maintained for factory alternators (typically 42-amp units), power steering pumps, and air conditioning compressors, though A/C installations were uncommon in high-performance SS applications due to packaging constraints around the large-valve heads.[7] Maintenance for the solid-lifter valvetrain required periodic lash adjustments using a feeler gauge, with the engine at top dead center on the compression stroke for each cylinder—typically 0.024 inches for intake valves and 0.028 inches for exhaust valves (hot)—to ensure precise timing and prevent excessive wear.[25] The oiling system held a capacity of 5 quarts with filter, utilizing a full-flow filter and gear-driven pump to support the high-revving nature of the engine, distinguishing it from the milder L34 and L35 setups that used hydraulic lifters needing less frequent adjustments but offering inferior breathing and power delivery.[3] This configuration underscored the L78's role as the high-performance baseline, rated at 375 horsepower in later years (detailed further in Performance Characteristics).[7]L89 Aluminum-Head Variant
The L89 variant of the Chevrolet L78 engine was developed and tested during 1967, with production commencing in December of that year for the 1968 model year, and it remained available through 1970 under Regular Production Option (RPO) L89. Total L89 production was limited, with approximately 1,100–1,200 units across all applications from 1968 to 1970.[26] This option replaced the standard cast-iron cylinder heads of the L78 with high-flow aluminum heads, maintaining the same rectangular port design and internal specifications for compatibility.[26] The aluminum heads, cast at the Winters Foundry and marked with a distinctive "snowflake" symbol, featured a 106.8 cc combustion chamber volume, 2.19-inch intake valves, and 1.84-inch exhaust valves, identical in porting to the L78's iron heads but reducing the overall engine weight by approximately 75 pounds.[26][27] These heads were bolted to the standard L78 396 cubic-inch block, preserving the engine's rated output at 375 horsepower without any increase, though the weight reduction contributed to improved front-end handling and balance in equipped vehicles.[28] The L89 was restricted to Super Sport (SS) models such as the Chevelle SS 396 and Camaro SS, where it served as a premium performance upgrade, costing approximately $395 to $832 over the base L78 depending on the model year and application.[27][29] Production remained limited, with examples including 272 units in 1968 Camaros and 18 in 1970 Chevelles, underscoring its exclusivity for enthusiasts seeking enhanced dynamics without additional power.[20][26] Discontinued after the 1970 model year, the L89 option was phased out primarily due to its high manufacturing costs and the increasing regulatory demands for emissions controls, which complicated the use of specialized aluminum components in production engines.[18]Applications
Intermediate and Full-Size Models
The Chevrolet L78 engine found its primary application in intermediate models like the Chevelle SS396, where it was offered as the highest-performance option from 1966 through 1970, transforming these mid-size coupes and convertibles into potent muscle cars during the era's high-output competition.[30] Introduced mid-year in 1966 as a carryover from the prior year's Z16 package, the L78 displaced 396 cubic inches through 1968, delivering 375 horsepower via a solid-lifter camshaft, high-compression heads, and a high-flow Holley carburetor, making it a favorite for drag strip enthusiasts.[30] For 1969 and 1970, Chevrolet bored the block to 402 cubic inches while retaining the L78 code and power rating, allowing the SS396 badge to continue despite the displacement increase, which helped maintain marketing continuity amid evolving emissions standards.[31] In stock configuration, L78-powered Chevelles demonstrated strong straight-line performance, with period road tests recording quarter-mile elapsed times of approximately 14.0 seconds at 101 mph, though optimized examples with factory options like positraction differentials could achieve low-13-second runs under ideal conditions.[4] Transmission choices for the Chevelle L78 included the close-ratio Muncie M21 four-speed manual for spirited driving or the Turbo Hydra-Matic 400 three-speed automatic for broader appeal, both paired with heavy-duty components to handle the engine's torque output.[4] These installations emphasized the L78's role in elevating the Chevelle's status as a versatile performer, balancing raw power with everyday usability in the intermediate platform. The L78 also appeared in full-size Chevrolet models, including the Impala SS from 1965 to 1969 (rated at 425 horsepower in 1965 and 375 horsepower from 1966 onward) and the Caprice SS from 1966 to 1969, where it provided top-tier performance in these larger sedans and coupes, though often overshadowed by the concurrent 427-cubic-inch L72 option that shared a similar 425-horsepower gross rating in earlier years—leading to occasional historical confusion despite verified L78 use in the big-car lineup.[1] Rated at 375 horsepower in 1966, the L78 transformed these heavyweight chassis into surprising sleepers, but the added curb weight—often exceeding 4,000 pounds—dulled acceleration, with zero-to-60 times stretching to around 7 seconds and quarter-mile performances lagging 1-2 seconds behind lighter intermediates.[32] Transmission pairings mirrored the Chevelle's, favoring the durable Muncie M20 wide-ratio or M21 close-ratio four-speeds alongside the Turbo Hydra-Matic 400 for smoother cruising suited to the full-size body's grand touring intent.[4] Rarer still were L78 installations in entry-level full-size models like the Bel Air and Biscayne during 1965 and 1966, typically reserved for custom orders or police interceptor packages that demanded high output in unassuming four-door sedans.[1] These applications highlighted the engine's versatility beyond luxury trims, though production was limited due to the models' fleet-oriented focus. Overall, the heavier full-size platforms compromised the L78's handling potential with softer suspensions and higher centers of gravity, prioritizing straight-line thrust over cornering agility when compared to the more nimble Chevelle intermediates.[32]Compact and Pony Car Models
The Chevrolet L78 engine found its way into the 1965 Corvette as the marque's inaugural big-block option, rated at 425 horsepower and available in both coupe and convertible body styles. This high-performance variant balanced the Corvette's lightweight fiberglass construction with substantial power, enabling impressive acceleration and handling dynamics suited to the sports car's agile chassis. However, the L78 was discontinued after the 1965 model year in favor of the more potent 427-cubic-inch L72 engine introduced for 1966, which offered higher output and better suited the Corvette's evolving performance demands.[2] In the first-generation Chevrolet Camaro SS, the L78 powered pony car variants from 1967 through 1970, transforming the compact platform into a formidable performer with enhanced agility over heavier full-size applications. The engine's installation in the Camaro emphasized quick throttle response and superior power-to-weight ratios, making it a favorite for street and track enthusiasts seeking lightweight muscle. Notably, the L78-equipped Camaro SS was distinct from the Z/28 package, which relied on a high-revving small-block V8 for Trans-Am racing homologation, whereas the L78 prioritized raw torque in a street-legal pony car format. Yenko Chevrolet further elevated select 1967 and 1968 Camaro SS models by starting with L78 donors and converting them to 427-cubic-inch L72 engines for even greater displacement and output, resulting in ultra-rare "Super Camaro" variants tuned for drag and road course dominance. The optional L89 aluminum-head version of the L78 was also briefly available in Camaros, offering minor weight savings without altering the core big-block character.[27] The L78 appeared in the Chevrolet Nova SS (also known as Chevy II SS in earlier years) from 1968 to 1970, marking a rare big-block installation in Chevrolet's sub-compact lineup and yielding exceptional power-to-weight advantages for nimble handling and straight-line speed. This configuration peaked in popularity during 1969, where the engine's torque overwhelmed the Nova's modest curb weight, creating a quintessential "sleeper" muscle car ideal for drag racing and daily driving. Special Central Office Production Order (COPO) variants, such as those ordered for 1969 Nova SS models, catered to drag racing teams by specifying the L78 in high-volume production runs not listed in standard option catalogs, enhancing the platform's competitiveness in NHRA Super Stock classes. Across these compact and pony car applications, the L78 was paired with standard Positraction limited-slip differentials housed in robust 12-bolt rear axles, ensuring optimal traction from the engine's high torque output during launches and cornering. This drivetrain setup, often geared with ratios like 3.55:1 or 4.10:1, amplified the lightweight vehicles' agility while mitigating wheel spin in performance-oriented scenarios.Production Statistics
Annual Production Figures
The Chevrolet L78 engine, a high-performance 396 cubic-inch V8, saw production from 1965 to 1970, with yearly totals reflecting its availability across Chevrolet's lineup of full-size, intermediate, compact, and pony cars, as well as the influence of emissions regulations toward the end of the decade. Output peaked in 1969 amid strong demand for muscle car applications before declining sharply in 1970. The grand total across all years approximated 45,000 units.| Year | Total Production | Notes on Distribution |
|---|---|---|
| 1965 | 4,000 | 1,838 full-size, 2,157 Corvette.[33][34] |
| 1966 | 3,099 | All intermediate models.[23] |
| 1967 | 1,750 | 612 intermediate, 1,138 pony cars.[23][35][36] |
| 1968 | 10,265 | 4,751 intermediate, 667 compact, 4,575 pony, plus 272 L78/L89 units.[23][37][38][39] |
| 1969 | 19,726 | 9,486 intermediate, 4,951 compact, 4,889 pony, plus 400 L78/L89 intermediate.[23][40][41][42][39] |
| 1970 | 6,527 | 2,144 intermediate, 3,765 compact, 600 pony, plus 18 L78/L89 intermediate.[23][6][23][39] |