Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Concentrated solar power
Concentrated solar power (CSP, also known as concentrating solar power, concentrated solar thermal) systems generate solar power by using mirrors or lenses to concentrate a large area of sunlight into a receiver. Electricity is generated when the concentrated light is converted to heat (solar thermal energy), which drives a heat engine (usually a steam turbine) connected to an electrical power generator or powers a thermochemical reaction.
As of 2021, global installed capacity of concentrated solar power stood at 6.8 GW. As of 2023, the total was 8.1 GW, with the inclusion of three new CSP projects in construction in China and in Dubai in the UAE. The U.S.-based National Renewable Energy Laboratory (NREL), which maintains a global database of CSP plants, counts 6.6 GW of operational capacity and another 1.5 GW under construction. By comparison, solar power reached 1 TW of global capacity in 2022, of which the overwhelming majority was photovoltaic.
As a thermal energy generating power station, CSP has more in common with thermal power stations such as coal, gas, or geothermal. A CSP plant can incorporate thermal energy storage, which stores energy either in the form of sensible heat or as latent heat (for example, using molten salt), which enables these plants to continue supplying electricity whenever it is needed, day or night. This makes CSP a dispatchable form of solar. Dispatchable renewable energy is particularly valuable in places where there is already a high penetration of photovoltaics (PV), such as California, because demand for electric power peaks near sunset just as PV capacity ramps down (a phenomenon referred to as duck curve).
CSP is often compared to photovoltaic solar (PV) since they both use solar energy. While solar PV experienced huge growth during the 2010s due to falling prices, solar CSP growth has been slow due to technical difficulties and high prices. In 2017, CSP represented less than 2% of worldwide installed capacity of solar electricity plants. However, CSP can more easily store energy during the night, making it more competitive with dispatchable generators and baseload plants.
The DEWA project in Dubai, under construction in 2019, held the world record for lowest CSP price in 2017 at US$73 per MWh for its 700 MW combined trough and tower project: 600 MW of trough, 100 MW of tower with 15 hours of thermal energy storage daily. Base-load CSP tariff in the extremely dry Atacama region of Chile reached below $50/MWh in 2017 auctions.
A legend has it that Archimedes used a "burning glass" to concentrate sunlight on the invading Roman fleet and repel them from Syracuse. In 1973 a Greek scientist, Dr. Ioannis Sakkas, curious about whether Archimedes could really have destroyed the Roman fleet in 212 BC, lined up nearly 60 Greek sailors, each holding an oblong mirror tipped to catch the sun's rays and direct them at a tar-covered plywood silhouette 49 m (160 ft) away. The ship caught fire after a few minutes; however, historians continue to doubt the Archimedes story.
In 1866, Auguste Mouchout used a parabolic trough to produce steam for the first solar steam engine. The first patent for a solar collector was obtained by the Italian Alessandro Battaglia in Genoa, Italy, in 1886. Over the following years, invеntors such as John Ericsson and Frank Shuman developed concentrating solar-powered dеvices for irrigation, refrigеration, and locomоtion. In 1913 Shuman finished a 55 horsepower (41 kW) parabolic solar thermal energy station in Maadi, Egypt for irrigation. The first solar-power system using a mirror dish was built by Dr. R.H. Goddard, who was already well known for his research on liquid-fueled rockets and wrote an article in 1929 in which he asserted that all the previous obstacles had been addressed.
Professor Giovanni Francia (1911–1980) designed and built the first concentrated-solar plant, which entered into operation in Sant'Ilario, near Genoa, Italy in 1968. This plant had the architecture of today's power tower plants, with a solar receiver in the center of a field of solar collectors. The plant was able to produce 1 MW with superheated steam at 100 bar and 500 °C. The 10 MW Solar One power tower was developed in Southern California in 1981. Solar One was converted into Solar Two in 1995, implementing a new design with a molten salt mixture (60% sodium nitrate, 40% potassium nitrate) as the receiver working fluid and as a storage medium. The molten salt approach proved effective, and Solar Two operated successfully until it was decommissioned in 1999. The parabolic-trough technology of the nearby Solar Energy Generating Systems (SEGS), begun in 1984, was more workable. The 354 MW SEGS was the largest solar power plant in the world until 2014.
Hub AI
Concentrated solar power AI simulator
(@Concentrated solar power_simulator)
Concentrated solar power
Concentrated solar power (CSP, also known as concentrating solar power, concentrated solar thermal) systems generate solar power by using mirrors or lenses to concentrate a large area of sunlight into a receiver. Electricity is generated when the concentrated light is converted to heat (solar thermal energy), which drives a heat engine (usually a steam turbine) connected to an electrical power generator or powers a thermochemical reaction.
As of 2021, global installed capacity of concentrated solar power stood at 6.8 GW. As of 2023, the total was 8.1 GW, with the inclusion of three new CSP projects in construction in China and in Dubai in the UAE. The U.S.-based National Renewable Energy Laboratory (NREL), which maintains a global database of CSP plants, counts 6.6 GW of operational capacity and another 1.5 GW under construction. By comparison, solar power reached 1 TW of global capacity in 2022, of which the overwhelming majority was photovoltaic.
As a thermal energy generating power station, CSP has more in common with thermal power stations such as coal, gas, or geothermal. A CSP plant can incorporate thermal energy storage, which stores energy either in the form of sensible heat or as latent heat (for example, using molten salt), which enables these plants to continue supplying electricity whenever it is needed, day or night. This makes CSP a dispatchable form of solar. Dispatchable renewable energy is particularly valuable in places where there is already a high penetration of photovoltaics (PV), such as California, because demand for electric power peaks near sunset just as PV capacity ramps down (a phenomenon referred to as duck curve).
CSP is often compared to photovoltaic solar (PV) since they both use solar energy. While solar PV experienced huge growth during the 2010s due to falling prices, solar CSP growth has been slow due to technical difficulties and high prices. In 2017, CSP represented less than 2% of worldwide installed capacity of solar electricity plants. However, CSP can more easily store energy during the night, making it more competitive with dispatchable generators and baseload plants.
The DEWA project in Dubai, under construction in 2019, held the world record for lowest CSP price in 2017 at US$73 per MWh for its 700 MW combined trough and tower project: 600 MW of trough, 100 MW of tower with 15 hours of thermal energy storage daily. Base-load CSP tariff in the extremely dry Atacama region of Chile reached below $50/MWh in 2017 auctions.
A legend has it that Archimedes used a "burning glass" to concentrate sunlight on the invading Roman fleet and repel them from Syracuse. In 1973 a Greek scientist, Dr. Ioannis Sakkas, curious about whether Archimedes could really have destroyed the Roman fleet in 212 BC, lined up nearly 60 Greek sailors, each holding an oblong mirror tipped to catch the sun's rays and direct them at a tar-covered plywood silhouette 49 m (160 ft) away. The ship caught fire after a few minutes; however, historians continue to doubt the Archimedes story.
In 1866, Auguste Mouchout used a parabolic trough to produce steam for the first solar steam engine. The first patent for a solar collector was obtained by the Italian Alessandro Battaglia in Genoa, Italy, in 1886. Over the following years, invеntors such as John Ericsson and Frank Shuman developed concentrating solar-powered dеvices for irrigation, refrigеration, and locomоtion. In 1913 Shuman finished a 55 horsepower (41 kW) parabolic solar thermal energy station in Maadi, Egypt for irrigation. The first solar-power system using a mirror dish was built by Dr. R.H. Goddard, who was already well known for his research on liquid-fueled rockets and wrote an article in 1929 in which he asserted that all the previous obstacles had been addressed.
Professor Giovanni Francia (1911–1980) designed and built the first concentrated-solar plant, which entered into operation in Sant'Ilario, near Genoa, Italy in 1968. This plant had the architecture of today's power tower plants, with a solar receiver in the center of a field of solar collectors. The plant was able to produce 1 MW with superheated steam at 100 bar and 500 °C. The 10 MW Solar One power tower was developed in Southern California in 1981. Solar One was converted into Solar Two in 1995, implementing a new design with a molten salt mixture (60% sodium nitrate, 40% potassium nitrate) as the receiver working fluid and as a storage medium. The molten salt approach proved effective, and Solar Two operated successfully until it was decommissioned in 1999. The parabolic-trough technology of the nearby Solar Energy Generating Systems (SEGS), begun in 1984, was more workable. The 354 MW SEGS was the largest solar power plant in the world until 2014.