Hubbry Logo
Dutton CarsDutton CarsMain
Open search
Dutton Cars
Community hub
Dutton Cars
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Dutton Cars
Dutton Cars
Dutton Cars
View on Wikipedia
from Wikipedia

Dutton Cars badge/logo

Dutton Cars, based in Worthing, Sussex, England, was a maker of kit cars between 1970 and 1989. In terms of number of kits produced, it was the largest kit-car manufacturer in the world.

The company was founded by Tim Dutton-Woolley and run from a small workshop in which a series of cars named P1 was built. In October 1971, the B-Type appeared with a more or less standard specification and based on Triumph Herald components. A move was also made to a larger factory in Tangmere, Chichester.

Products

[edit]

Most Duttons depended on a ladder-frame chassis built from steel profiles, which held the various parts taken from the donor car.[1] After originally using Triumph Herald parts, most Duttons kits used Ford Escort Mk 1 or Mk 2 components.

The B-Type eventually evolved into the Dutton Phaeton. Later versions of the Phaeton were based on Ford Escort components and were produced until 1989. These were also available as fully built-up cars, in which case they received a 1.6-litre Ford Crossflow engine with 84 hp (63 kW).[2]

In 1979, Dutton launched the Dutton Sierra, an Escort-based estate car with off-road looks. Three years later, the Ford Motor Company decided to use the Sierra name on their Cortina/Taunus replacement, and served Dutton with a legal writ demanding that they stop using the name. At a case in the High Court in London, though, Dutton won the right to continue with the name on kit cars, as the judge ruled that they were a separate category from assembled cars.[3] The case was popularly portrayed as a "gritty David and Goliath battle", and provided Dutton with some welcome publicity.[4] The Sierra was Dutton's best seller for many years, production reaching a peak of 22 cars a week. The model was withdrawn in 1989.[4] A further move to larger premises back in Worthing was made in 1982 with glass-fibre body making at a separate works in Lancing.

On the usual rear-wheel-drive Escort underpinnings, Dutton placed the body of the new Rico. It made its debut in October 1984, at the Birmingham Motor Show. It used the mechanical parts and doors from a two-door Escort but had a Dutton-developed glass-fibre body over a steel tubular frame.[5] The Rico was a compact and aerodynamic two-door saloon, 3,911 mm (154.0 in) long and much lighter than the donor car.[6] The Rico was a new concept for kit cars, a sporting saloon of modern appearance rather than the typical, traditional two-seat roadster or replica.[5]

Hacker Maroc S2

By 1984, 80 people were employed spread over four factories and a large showroom in Worthing – production topped 1,000 a year. By 1989, Tim Dutton had become bored with the kit-car scene and all the designs were sold. A new model had been developed called the Maroc, a heavily modified Ford Fiesta with a convertible body. Initially, it was available as a factory-finished car, but prices became too high, and from 1993, kit versions were made available. The design has been sold on to Novus of Bolney, Sussex; availability continued until at least 2006.

After leaving the kit-car business, Tim Dutton operated as a consultant, but returned to the automobile-making business in 1995 with the Dutton Mariner and Dutton Commander, amphibious cars based on the Ford Fiesta and Suzuki Samurai. The Dutton Surf, based on the current Suzuki Jimny, was introduced in 2005. Tim Dutton is now a record holder as the only person to have crossed the English Channel twice in an amphibious car.

Dutton Surf al Lago d'Orta

Early Dutton kits are now hard to obtain. Most Duttons have already been assembled and are only available to purchase as second-hand cars, usually in need of some restoration. When a Dutton is purchased in kit form, the person building needs a donor car to provide the engine, gearbox, and many other essential components. Fords are the most common donor cars, especially for Duttons. Most people use donor cars that would no longer be roadworthy and use the spares to create a new kit car.

Models

[edit]
Dutton Cars models
Type Year Image Notes
Dutton P1 1970–71 Lotus 7-like car based on MG Midget mechanical parts, aluminium body panels, glass-fibre wings
Dutton B Type 1971–74 Triumph Herald based, body mainly made from glass-fibre, Ford engine optional
Dutton B Plus 1974–77 Rear axle now Ford Cortina, but with coil springs
Dutton Malaga 1974–77 Front wings moulded in with the body
Dutton Malaga B+ 1975–77 Malaga front and B+ rear
Dutton Cantera 1976–77 Coupé version of Malaga B+
Dutton Phaeton Series 1 1977–1981 Updated Malaga B+
Dutton Phaeton Series 2 1980–82 Rear suspension modified to use Cortina springs
Dutton Phaeton Series 3 1981–86 Modified chassis to use Ford Escort components
Dutton Phaeton Series 4 1986–89 Modified body with integral bumpers
Dutton B Plus Series 2 1989 B Plus incorporating Phaeton body style[7]
Dutton Melos 1981–89 Phaeton chassis with new body with more rounded styling, 2+2 seating configuration
Dutton Legerra 1988–89 The first Dutton sports car with opening doors
Dutton Sierra Series 1 1980–84 Ford Escort-based four-seater, estate car/off-road styling, an early, two-wheel-drive SUV
Dutton Sierra Series 2 1984–86 Improved body with some double-skinned panels
Dutton Sierra Series 3 1986–89 New body but very similar in styling to Series 2
Dutton Sierra Drop Head 1983–89 No roof, pick-up version also made
Dutton Rico 1984–89 Escort-based four-seat, two-door saloon
Dutton Rico Shuttle 1986–89 Estate car version of the Rico
Dutton Beneto 1989 "SUV" styled version of the Rico

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Dutton Cars

View on Grokipedia
from Grokipedia
Dutton Cars was a prominent British kit car manufacturer based in , , , active from 1970 to 1989 and renowned for producing affordable, customizable vehicles that appealed to enthusiasts seeking experiences on donor car . Founded by engineer Tim Dutton-Woolley, the company grew from a small operation into the world's largest producer, with over 8,000 units sold by the end of its primary run, peaking at 22 vehicles per week and employing more than 80 staff across a 25,000-square-foot facility. The origins of Dutton Cars trace back to 1968, when Dutton-Woolley established Dutton Sports Ltd following his tool-making apprenticeship, initially building the sports car registered that November. By 1970, the company had formalized as Dutton Cars and launched its first production model, the P1, a Lotus 7-inspired lightweight roadster using components with aluminum body panels and wings, produced until 1971. The focus shifted to kit cars, which allowed buyers to assemble vehicles from fiberglass bodies fitted to common donor parts like those from or Ford models, emphasizing simplicity and cost-effectiveness. During its peak in the and , Dutton Cars diversified into a wide range of models, evolving from basic sports cars to more versatile designs. Key offerings included the B Type (1971–1974), a Triumph Herald-based with optional Ford engines; the Phaeton series (1977–1989), which progressed through four iterations using Ford Escort components and featured integral bumpers in later versions for enhanced road legality; and the Sierra series (1980–1989), an Escort-based four-seater with estate and off-road styling options, including a drop-head variant from 1983. Other notable models encompassed the Malaga (1974–1977), a refined B Type successor with integrated wings; the Melos (1982–1989), a rounded on the Phaeton chassis; the Rico (1984–1989), an Escort-based saloon; and the short-lived Legerra (1988–1989), introducing opening doors for improved practicality. The company's success was bolstered by innovations like winning a 1982–1983 legal dispute with Ford over the Sierra model name and becoming the first firm with an online presence in 1998. Production ceased in 1989 amid concerns over design theft in the industry, leading to a company split and sale of assets, though some models like the continued via other builders. Post-closure, Dutton-Woolley pivoted to amphibious vehicles in 1994, such as the Surf and Reef models based on platforms, following a 1992 factory fire that destroyed prior prototypes; production continued until the facility's sale to a Polish distributor in 2023, after which the new owner resumed manufacturing the models. Dutton Cars' legacy endures through enthusiast clubs and surviving vehicles, celebrated for democratizing ownership during the kit car boom.

History

Founding and early years

The origins of Dutton Cars trace back to 1968, when Tim Dutton-Woolley established Dutton Sports Ltd following his tool-making apprenticeship and built the sports car , registered that November. Dutton Cars was formalized in 1970 in a small workshop in , , , initially focusing on the production of kit cars for enthusiasts seeking affordable and customizable vehicles. The company emerged from Dutton-Woolley's vision to offer accessible alternatives to expensive production s, drawing on his engineering background to create bespoke designs. In the same year, Dutton-Woolley developed the P1 prototype, a lightweight, open-top design inspired by the Lotus 7, featuring aluminum body panels and glass fibre wings mounted on a modified donor chassis with its mechanical components. This prototype marked the company's entry into manufacturing, with early builds varying significantly as each was handcrafted to individual specifications, resulting in small-scale output limited by the workshop's constraints. By October 1971, Dutton Cars launched the B-Type as its first standardized model, utilizing donor parts for the chassis and running gear, a glass fibre body, and an optional Ford engine to enhance performance and accessibility. To accommodate increasing demand, the operation relocated that year to a larger in Tangmere near , enabling more consistent production while maintaining a focus on enthusiast-driven customization. The early 1970s saw the introduction of several variants building on the B-Type platform, addressing handling and aesthetic improvements amid ongoing challenges of limited resources and manual assembly processes. In 1974, the B Plus variant debuted with a rear axle and suspension for better ride quality and stability. That same year, the Malaga model followed, incorporating integrated front wings moulded directly into the body for a sleeker appearance. By 1975, the Malaga B+ combined the Malaga's front styling with the B Plus rear setup, further refining the design for improved usability. In 1976, the coupé emerged as an enclosed variant of the Malaga B+, offering a more versatile option for buyers while upholding the company's commitment to modular, budget-friendly kits. These developments laid the groundwork for later series like the Phaeton, evolving from the core principles of adaptability and donor-part integration established in the founding years.

Growth and expansion

Following the success of early models like the B-Type, which laid the foundation for Dutton's designs, the company evolved its lineup with the introduction of the Phaeton Series 1 in 1977. This model represented an updated version of the Malaga B+, incorporating a modified and bodywork while utilizing donor components for mechanical reliability, enabling builders to assemble a sporty two-seater kit. In 1979, Dutton relocated its operations back to larger premises in Worthing, West Sussex, to accommodate growing demand, and established a separate glass fibre body manufacturing works in nearby Lancing to streamline production. This expansion supported the announcement of the Sierra Series 1 later that year, a four-seater estate with distinctive off-road styling built on a Ford Escort donor chassis, which entered full production in 1980. The Sierra's launch was bolstered by significant publicity from a 1979 legal battle with Ford Motor Company, who challenged Dutton's use of the "Sierra" name ahead of their own model's debut; Dutton won the High Court case in 1983, securing the right to continue using the name until 1989. By 1982, Dutton further diversified with the Phaeton Series 3, which shifted to a Ford Escort-based platform featuring a modified for improved handling and versatility, and the Melos, a variant using the Phaeton chassis but with rounded, more aerodynamic styling to appeal to a broader aesthetic range. These developments coincided with rapid scaling: employment grew to 70 people by 1984, and annual kit production exceeded 1,000 units, establishing Dutton as the world's largest manufacturer with over 8,000 vehicles produced at its peak. The company's kits particularly attracted DIY enthusiasts seeking affordable, customizable vehicles, while export efforts extended to , including a short-lived 1979 collaboration project with Poland's (FSO) for local assembly before political disruptions halted it.

Closure and aftermath

In the mid-to-late 1980s, Dutton Cars introduced several updated models to its lineup, all based on Ford mechanical components. The Phaeton Series 4, launched in 1986, featured a modified body with integral bumpers for improved aesthetics and durability. That same year, the Sierra Series 3 debuted with a new body design that retained stylistic similarities to its predecessor while incorporating refinements such as return edges on wheel arches. The Rico Shuttle, an estate car variant of the Rico saloon, also appeared in 1986, utilizing a modified Sierra with Ford Escort Mark 1 and 2 components, including the windscreen, doors, and Mk3 headlights. By 1988, the Legerra was introduced as a on a revised Phaeton , marking the first Dutton model with fully opening doors, though it lacked wind-down windows, and it incorporated parts from Ford Escort and models. Dutton Cars Ltd. ceased operations in 1989 after 19 years, having reached a peak production of over 8,000 kits and employing up to 80 staff across multiple sites. The closure stemmed from founder Tim Dutton-Woolley's disillusionment with the kit car industry, particularly due to widespread design rip-offs by competitors, which eroded faith in the sector's integrity. Following the shutdown, the company's designs were sold in parts to various firms, as no single buyer acquired the entire portfolio. Notably, the Maroc—a heavily modified Ford Fiesta-based convertible developed just before closure—was acquired by Hacker Engineering in Littlehampton, which produced fully built, type-approved versions from 1989 to 1993 before shifting to kits due to cost pressures; the design was later sold to Novus in Bolney, Sussex, where a modified iteration remained available until at least 2006. Post-closure, Tim Dutton-Woolley initially served as a in the automotive field before returning to vehicle production in with personal ventures focused on kit cars. These included the Dutton , based on the , and the Dutton , derived from the , both emphasizing dual land-and-water capabilities. One such achieved a notable milestone by crossing the , highlighting the practicality of Dutton's amphibious innovations. Overall, Dutton Cars left a lasting legacy as a pioneer in affordable, enthusiast-driven kit vehicles, influencing the market by demonstrating scalable production of customizable, Ford-based designs that appealed to budget-conscious builders.

Models

Phaeton series

The Phaeton series, produced by Dutton Cars from 1977 to 1989, represented the company's flagship two-seater roadster lineup, evolving from earlier Malaga designs into a popular known for its lightweight body and affordable construction. Built on a tubular steel , the Phaeton accommodated donor mechanical components primarily from Ford and Triumph vehicles, offering builders engine options ranging from 1.3-liter Ford Kent units to 2.0-liter engines, with earlier models also utilizing powertrains. These configurations typically delivered top speeds around 100 mph in higher-spec variants, emphasizing simple, open-top motoring for enthusiasts. Over its production run, the series saw six iterations, with progressive refinements in , suspension, and bodywork enhancing handling and aesthetics while maintaining the core appeal of a basic, customizable roadster. The Phaeton Series 1 (1977–1981) served as an updated iteration of the Malaga B+, featuring a slightly modified derived from the donor vehicle and a revised body with a full-width boot lid and smoother bonnet lines, designed for two occupants in a minimalist roadster layout. Mechanical components remained consistent with the Malaga B+, including Triumph front suspension and Ford rear axle, providing basic performance suitable for entry-level kit builders. Approximately the first 1,600 units were produced in this form, establishing the Phaeton as Dutton's best-selling model to date. In the Phaeton Series 2 (1981–1982), rear suspension was upgraded to incorporate leaf springs, improving ride quality and handling over the Series 1 while retaining the same and body design; the spring hangers were often concealed with covers for a cleaner appearance. This short-run variant, covering chassis numbers 762 to 4434, bridged the early Triumph-based models toward more modern Ford components, with production estimated at around 300 units. The Phaeton Series 3 (1982–1986) marked a significant with a redesigned adapted for Ford Escort Mk1/Mk2 components, including strut front suspension augmented by Dutton top wishbones and coil-over dampers, resulting in superior road performance and stability. The body was fully revised to include separate seating with space behind for minor storage, and lighting shifted from round units to rectangular alternatives in later examples; engine choices expanded to Ford Kent or units mounted no more than 150 mm or 100 mm from the front wheel axis, respectively. This series, spanning chassis 1717 to 5835, accounted for a substantial portion of the lineup's output amid Dutton's peak production of up to 1,000 kits annually by the mid-1980s. The Phaeton Series 4 (1986–1989) refined the Series 3 and mechanicals, adding integral bumpers with a wider base, bonnet vents, a heater intake, and front fog lights integrated into the spoiler for improved and minor safety enhancements. Retaining the Ford Escort gearbox and rear axle, along with 13- or 14-inch wheels, this version offered the most polished handling in the lineup via an optional five-link rear suspension setup. Production covered chassis 5540 to 6227, concluding the original run as Dutton shifted focus. A transitional B Plus Series 2 (1989) hybrid model combined the refined Phaeton Series 4 body with older mechanical components, including its front suspension and engine, on a modified B Plus to provide a cost-effective option during the company's wind-down. This final variant maintained the roadster's lightweight ethos, with a of 2210 mm and two-seat configuration, but saw limited production as Dutton Cars ceased operations. Across all series, the Phaeton emphasized fiberglass construction for a curb weight around 650 kg, a spaceframe-like tubular for rigidity, and donor parts accessibility, with no external luggage boxes permitted in period builds. Total production exceeded 3,000 units, making it Dutton's most successful model and a staple in the UK scene for its value and simplicity.

Sierra series

The Sierra series represented Dutton Cars' entry into practical, family-oriented vehicles with off-road aesthetics, produced from 1979 to 1989 and based on the mechanical components of the Ford Escort donor vehicle. These models utilized the Escort's windscreen, doors, engine, gearbox, and other essential parts, creating an affordable four-seater estate that appealed to rural users seeking enhanced ground clearance and rugged styling without full four-wheel-drive complexity. The series became Dutton's best-selling line, with approximately 3,000 units produced, establishing it as a precursor to compact SUVs in the market. The Sierra Series 1, manufactured from 1979 to 1984, featured a body with off-road-inspired design elements, including raised for improved ground clearance over the standard Escort. Offered as a stage-one kit for £2,995, it accommodated four passengers in an estate configuration, prioritizing utility and ease of assembly for home builders. Engines were typically the Ford Crossflow 1.3L or 1.6L units from the donor Escort, delivering reliable performance for everyday and light off-road use. Introduced in 1984 and running until 1986, the Sierra Series 2 incorporated double-skinned panels for greater structural integrity and better resistance to rust compared to the Series 1. This update maintained the Escort-based chassis and four-seat layout while enhancing durability for prolonged exposure to harsh conditions. Optional conversion kits for were available, broadening its appeal for more demanding terrains. The Sierra Series 3, produced from 1986 to 1989, featured a redesigned body shell that preserved the Series 2's styling but offered refined moldings for improved fit and finish. Interior space was expanded slightly for greater passenger comfort, and compatibility extended to larger Ford engines up to 2.0L, allowing for upgraded performance while retaining the model's affordability. The measured 2400 mm, supporting the extended seating arrangement. A variant, the Sierra Drop Head, was offered from 1983 to 1989 as a roofless version, with a pick-up option for added utility in light cargo tasks. Approximately 50 Drop Head units and 5 pick-ups were built, catering to users needing open-air versatility or basic hauling capabilities. The series' name sparked a notable legal dispute in 1982 when sought to prevent its use for their upcoming saloon model; after a five-day trial in , Dutton prevailed, securing rights to "Sierra" and incurring £20,000 in costs that boosted the company's visibility. This outcome contributed to sustained sales through 1989, underscoring the model's role in Dutton's growth.

Rico series

The Rico series, introduced by Dutton Cars in 1984, comprised a lineup of saloon and estate kit cars aimed at providing practical family transportation through customizable, lightweight fiberglass constructions built on a modified Ford Sierra donor chassis with components from the Ford Escort. These models marked a shift toward more enclosed, versatile vehicles compared to Dutton's earlier sports-oriented designs, emphasizing spacious interiors and on-road comfort for everyday use. The series was produced until 1989, with the intent to bridge the gap between high-performance kit cars and reliable daily drivers suitable for budget-conscious families. The core Rico model was a four-seat saloon featuring a body fitted directly over the stock , which reduced overall weight and enhanced handling and while retaining the donor's mechanical reliability. It offered seating for up to five occupants, though rear space was somewhat limited, and supported engine options from the Sierra's 1.6L to 2.0L inline-four units, allowing builders to choose based on performance needs. Production of the Rico ran from to 1989, with approximately 25 units sold as kits. Extending the saloon's practicality, the Rico Shuttle variant debuted in 1986 as an estate car adaptation, incorporating additional rear cargo space for improved versatility in hauling family gear or light loads without compromising the base model's agile ride. Like the standard Rico, it utilized the donor for its underpinnings, including suspension and drivetrain components, and maintained a focus on enclosed cabin comfort for on-road family travel. Around 50 Rico Shuttle kits were produced through 1989. In its final year, the series expanded with the Beneto, a short-run SUV-styled variant of the Rico that featured an elevated and rugged exterior aesthetics to appeal to buyers desiring a more adventurous look while preserving saloon-like drivability. Built on a modified chassis, the Beneto retained the series' emphasis on lightweight construction but added visual elements evoking off-road capability, though it remained optimized for standard road use. Only about 12 Beneto kits were made in , contributing to the overall Rico series total of approximately 87 units across all variants. The Rico lineup drew brief influence from Dutton's earlier Escort-based models in its development of compact, donor-derived saloons, but prioritized Sierra components for greater interior space and power options. Targeted at families, the series' kits enabled , such as interior trimming and color choices, at a time when kit cars were gaining popularity for affordable, hands-on vehicle building.

Other models

Dutton's early prototypes and variants laid the groundwork for its kit car innovations, beginning with the P1 introduced in 1970. This model was a Lotus 7-style replica constructed using mechanical components from the , featuring aluminum body panels and glass-fiber wings for lightweight performance. Only 9 units were produced before it evolved into subsequent designs. In 1976, the Cantera coupé emerged as a niche two-door offering based on Triumph Herald components, building on the earlier B-Type platform with a focus on compact, sporty enclosure. Approximately 6 units were built during its short 1976–1977 run, highlighting Dutton's experimentation with closed-body variants amid its open-top focus. The Melos, produced from 1982 to 1989 (approximately 1,500 units), represented a refined sports car with rounded styling reminiscent of the Phaeton series, utilizing a Ford Escort donor for its ladder-frame chassis and engine options up to the V6. It offered 2+2 seating for greater practicality while maintaining modular kit assembly for home builders. Toward the end of the decade, the Legerra (1988–1989, approximately 120 units) introduced a key innovation with fully opening doors on an Escort-based and glass-reinforced (GRP) bodywork, though it lacked wind-down windows. A small batch was assembled, emphasizing accessibility in design without compromising the brand's kit ethos. The Maroc, launched in 1989, shifted toward specialization using a heavily modified as its base, featuring sporty tuning and a shortened for agile handling. Production continued under Engineering from 1989 to 1993 as a type-approved factory-built model, with kits available thereafter to extend its lifespan. Following the company's closure, Dutton's amphibious developments from 1994 onward expanded into dual-purpose vehicles, including the , a two-wheel-drive model based on the with an integrated hull for seamless land-to-water transitions. Complementing it was , a four-wheel-drive variant derived from the , both emphasizing modular kits that allowed builders to add water propulsion systems such as retractable propellers. These models achieved notable feats, with one Commando variant successfully crossing the in 2006, demonstrating their seaworthiness at speeds around 5 knots. Collectively, production of these miscellaneous models exceeded 2,000 units (estimates), underscoring Dutton's innovative yet specialized approach to kit cars that prioritized convertibles and water-capable designs over mass output.
Add your contribution
Related Hubs
User Avatar
No comments yet.