Community hub
0 subscribers8 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to EMD SD45.
Nothing was collected or created yet.
EMD SD45
View on Wikipediafrom Wikipedia
| EMD SD45 | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 A pair of Wisconsin Central (WC) SD45s nos. 6633 and 6610 at Oak Park, Illinois on September 5, 1999. | |||||||||||||||||||||
| |||||||||||||||||||||
| |||||||||||||||||||||
| |||||||||||||||||||||
| [1][2] | |||||||||||||||||||||
The SD45 is a six-axle diesel-electric locomotive class built by General Motors Electro-Motive Division between 1965 and 1971. It has an EMD 645E3 twenty-cylinder engine generating 3,600 hp (2,680 kW) on the same frame as the SD38, SD39, SD40, and SDP40. As of 2023, most SD45s have been retired, scrapped, or rebuilt to SD40-2 standards.
Design
[edit]A total of 1,260 were built for American railroads before the SD45-2 replaced it in 1972, along with the related SD45T-2 "Tunnel Motor."
SD45s had several teething problems. Reliability was not as high as anticipated; the twenty-cylinder prime mover was prone to crankshaft failure from engine block flex. Though it produced 600 horsepower (450 kW) more than the 16-645E3 in the SD40, some railroads felt the extra horsepower was not worth it, even after EMD strengthened the block to eliminate crankshaft failures. At low speeds when tractive effort was adhesion-limited, the SD45 provided no advantage over the SD40.[citation needed]
Buyers included the Burlington Northern, Southern Pacific, Santa Fe, Pennsylvania Railroad, Norfolk and Western Railway, Great Northern Railway, Union Pacific, Denver and Rio Grande Western Railroad, Southern Railway, and Northern Pacific Railway. Many SD45s still exist, some rebuilt with sixteen-cylinder 645s for lease companies. SD45s and SD45-2s owned by Montana Rail Link retain their 20-cylinder prime movers. Wisconsin Central used to roster a large fleet of SD45s, but its sale to CN has resulted in the retirement of the entire fleet, with mass scrappings. Montana Rail Link is also starting to sell some for scrap.[citation needed]
EMD built seven examples of an experimental modification of the SD45, designated SD45X. The SD45X trialed several new features, including a more powerful EMD 645E3 engine producing up to 4,200 horsepower (3,130 kW) and a newly designed truck intended to have higher adhesion. Changes to the body included the use of different radiator fans and a flat rather than beveled end to the long hood. The SD45X was supposed to be a precursor to the proposed EMD 55 series of locomotives (SD55), however due to the failure of the 50 series locomotives, the cataloged SD55 was never put into production. Six of the SD45X locomotives were purchased by the Southern Pacific Railroad, with the seventh kept by EMD.[3]
Accidents and incidents
[edit]- On February 20, 1989, Southern Pacific SD45R locomotive #7502 was involved in a wreck that derailed 48-cars of an 82-car train and three of these cars had contained residue from chlorine, phosphoric acid and hydrocarbons.[4]
- On May 12, 1989, Southern Pacific SD45R locomotives #7551 (formerly #8985) and #7549 (formerly #9038) were both destroyed in the 1989 Cajon Pass Runaway when they crashed along Duffy Street in San Bernardino, California.[5]
Rebuilds
[edit]SD45u
[edit]The Atchison, Topeka and Santa Fe Railway rebuilt 115 units into what had become the EMD SD45u.[6] They were all renumbered as 5300-5483 between 1979 and 1989.[6][7]
SD44R
[edit]In 1981, the Southern Pacific Transportation Company rebuilt a single SD45 (SP SD45 #8837) into a single locomotive model designated the SD44R and numbered it #7399.
SD45R
[edit]The Southern Pacific Transportation Company rebuilt a total of 167 EMD SD45 units into EMD SD45R diesel locomotives at their own Sacramento Shops under the Southern Pacific's M-99 rebuild program and renumbered their units as 7400 through 7566. Most of them in their SD45 form were classified by the Southern Pacific as EF636-1, EF636-2, EF636-3, EF636-4, EF636-5 and EF636-6, but when they were all rebuilt under the Southern Pacific's M-99 rebuild program, they were classified as EF636LR-1, EF636R-2 and EF636LR-3.[8]
SD40M-2
[edit]In 1993, the Southern Pacific Transportation Company had made a contract with Morrison–Knudsen to supply 133 locomotives, as part of the contract, Southern Pacific was to supply no car-bodies or shells. The rebuilds consisted of a total of thirty EMD SD40 units, ninety-seven EMD SD45 units and six EMD SDP45 units all of which from various other railroads.[9][10] Morrison–Knudsen also made ten SD40M-2s for the Canadian Pacific Railway using seven SD45s and three SD40s.
SD40-2/SD40-3
[edit]The units are rebuilt with a 16-cylinder engine and derated the units from 3600 to 3000 HP.
SD45 operators
[edit]| Railroad | Quantity | Road Numbers | Notes |
|---|---|---|---|
| Electro-Motive Diesel (demonstrators) | 4 | 4351-4354 | |
| Atchison, Topeka and Santa Fe Railway | 125 | 1800-1889, 5590-5624 | 84 rebuilt to SD45u renumbered to 5300-5483 between 1979 and 1989. |
| Atlantic Coast Line Railroad | 10 | 1024-1033 | Except wrecked and scrapped units, renumbered and operated by Seaboard Coast Line Railroad after 1967 merger, many eventually operated by CSX after 1986 merger before being sold to other railroads or scrapped. |
| Burlington Northern Railroad | 96 | 6472-6567 | |
| Chicago, Burlington and Quincy Railroad | 15 | 516-530 | |
| Chicago, Milwaukee, St. Paul and Pacific Railroad | 10 | 4000-4009 | |
| Chicago and North Western Railway | 61 | 901-920, 937-977 | Only SD45's built without dynamic brakes. |
| Colorado and Southern Railway | 7 | 868-874 | |
| Denver and Rio Grande Western Railroad | 26 | 5315-5340 | |
| Erie Lackawanna Railway | 34 | 3601-3634 | |
| Great Northern Railway | 27 | 400-426 | |
| Norfolk and Western Railway | 115 | 1700-1814 | High short hoods; except wrecked and scrapped units, remainder transferred to Norfolk Southern in 1982 merger; many in service until retired in 1987, then sold into leasing or other services. |
| Northern Pacific Railway | 30 | 3600-3629 | |
| Penn Central Transportation Company | 5 | 6235-6239 | |
| Pennsylvania Railroad | 130 | 6105-6234 | |
| Reading Company | 5 | 7600-7604 | |
| Seaboard Coast Line Railroad | 35 | 2010-2044 | Except wrecked and scrapped units, Atlantic Coast Line Railroad units renumbered and operated by Seaboard Coast Line after 1967 merger, many of both railroads' units eventually operated by CSX after 1986 merger before being sold to other railroads or scrapped. |
| Southern Railway | 70 | 3100-3169 | High short hoods; except wrecked and scrapped units, remainder transferred to Norfolk Southern in 1982 merger; many in service until retired in 1987, then sold into leasing or other services. |
| Southern Pacific Transportation Company | 317 | 8800-8963, 8982–9051, 9069-9151 | Most rebuilt to SD45R locomotives. 7551 and 7549 destroyed 1989 Cajon Pass Runaway and scrapped. |
| St. Louis-San Francisco Railway | 49 | 900-948 | |
| St. Louis Southwestern Railway | 39 | 8964-8981, 9052–9068, 9152-9155 | |
| Union Pacific Railroad | 50 | 3600-3649 | |
| Totals | 1,260 |
SD45X operators
[edit]| Railroad | Quantity | Road Numbers | Notes |
|---|---|---|---|
| Electro-Motive Diesel | 4 | 4201-4203, 5740 | |
| Southern Pacific Transportation Company | 3 | 9500-9502 | |
| Totals | 7 |
Preservation
[edit]
- Erie Lackawanna No. 3607 is preserved at the St. Louis National Museum of Transportation. Restored to EL colors, this unit is a static display.
- Great Northern 400, named "Hustle Muscle", was the first production SD45. It is preserved by the Great Northern Railway Historical Society, based out of Saint Paul, Minnesota. It was in active service on the Minnesota Transportation Museum's Osceola and St. Croix Valley Railway until it suffered a crankshaft failure in its original 20-645E3 engine, requiring a replacement engine to be installed. BNSF Railway overhauled a 20-645E3 engine from a retired ex-ATSF SD45-2 and donated and installed the new engine in January 2019.[citation needed]
- Kansas City Southern No. 1200 is at the Rail Museum of Heroica Matamoros in Matamoros, Mexico on static display
- Norfolk and Western No. 1776, a high-hood unit, is a static display at the Virginia Museum of Transportation.
- Northern Pacific 3617 is preserved at the Lake Superior Railroad Museum. It has been restored to active service.[11][12]
- Seaboard Coast Line No. 2024 is preserved at the Southern Appalachia Railway Museum[13] in Oak Ridge, Tennessee, and is currently painted in the Clinchfield Railroad scheme as of December 2017.[14]
- Southern Pacific 7457 is a static display at the Utah State Railroad Museum in Ogden, Utah.
- Wisconsin Central No. 7525 is at the Illinois Railway Museum and is operable. It is one of two WC SD45 units to be painted in an Operation Lifesaver scheme.
References
[edit]- ^ Foster 1996, p. 58
- ^ Solomon 2014, p. 277
- ^ Marre, Louis A. (1995). Diesel locomotives : the first 50 years : a guide to diesels built before 1972. Waukesha, WI: Kalmbach Pub. Co. p. 81. ISBN 0-89024-258-5. OCLC 34531120.
- ^ Archives, L. A. Times (1989-02-21). "The State : Train Derails; 150 Evacuated". Los Angeles Times. Retrieved 2023-09-30.
- ^ NTSB (1990), pp. vi–vii
- ^ a b "ATSF EMD SD45/SD45u Power Roster". old.atsfrr.org. Retrieved 2023-10-29.
- ^ Extra Twenty-two Hundred South - Issues 112-118. Dover Printing. 1997. p. 9.
- ^ "SP Rebuild Programs". utahrails.net. Retrieved 2023-09-30.
- ^ Shippen, Bill (1999). Southern Pacific in Transition. Four Ways Publications. p. 157. ISBN 978-1-885614-26-1.
- ^ Railfan & Railroad. Vol. 14. Carstens Publications. 1995. p. 42.
- ^ Glischinski, Steve (15 September 2015). "NP SD45 appears on a photo freight in Minnesota". Trains. Retrieved 16 September 2015. (subscription required)
- ^ "Museum volunteers return Northern Pacific SD45 to operation". 11 March 2021.
- ^ "Seaboard Coast Line SD45 being restored for museum". Trains. 9 September 2015. Retrieved 10 September 2015. (subscription required)
- ^ "Historic locomotives to pull 75th Santa Train".
Sources
[edit]- Foster, Gerald L. (1996). A Field Guide to Trains of North America. Boston: Houghton Mifflin. ISBN 0-3957-0112-0.
- Pinkepank, Jerry. Diesel Spotters Guide 2.
- Solomon, Brian (2014). GE and EMD Locomotives: The Illustrated History. Minneapolis, Minnesota: Voyageur Press. ISBN 978-0-7603-4612-9.
- Diesel Spotter's Guide, Volume 2. Kalmbach, 1994.
- White, Dr. W. J. How Diesel Electric Locomotives Operate. Peat. 1998.
Bibliography
[edit]Further reading
[edit]- Strapac, Joseph A. (November 1970). "Espee's SD-45X's". Pacific News. No. 109. pp. 3–5. ISSN 0030-879X. Archived from the original on November 3, 2018.
External links
[edit]
Wikimedia Commons has media related to EMD SD45 locomotives.
EMD SD45
View on Grokipediafrom Grokipedia
Development and production
Origins and introduction
In the mid-1960s, North American railroads faced growing demands for higher-horsepower locomotives to haul heavier freight trains, particularly on challenging western routes with steep grades and long distances. Electro-Motive Division (EMD), a subsidiary of General Motors, responded by developing the SD45 as an evolution of its successful SD40 model, which featured a 16-cylinder 645-series engine producing 3,000 horsepower. The SD45 incorporated a new 20-cylinder version of the 645 engine, turbocharged to deliver 3,600 horsepower, directly competing with General Electric's U36C in the intensifying "horsepower race" among locomotive manufacturers.[1][3] EMD addressed lessons from earlier 20-cylinder experiments, such as the SD35, which suffered from reliability challenges including overheating and insufficient cooling due to its 20-567E engine design. The SD45's engineering refinements, including a lengthened frame and improved cooling system with a distinctive flared rear radiator, aimed to enhance durability while providing the increased power needed for efficient heavy-haul operations on railroads like those in the West. These design goals prioritized sustained performance for long freight runs, marking a significant advancement in EMD's second-generation diesel lineup.[1][4] The SD45 was announced and publicly debuted in December 1965 with EMD demonstrator unit #4351, showcased at industry events to highlight its capabilities. First production deliveries arrived in early 1966 to the Atchison, Topeka and Santa Fe Railway (ATSF), numbered 1800-1829, fulfilling the railroad's need for powerful units to handle its transcontinental traffic. Initial market reception was strong among major freight carriers seeking to modernize fleets, with early orders from the Santa Fe, Southern Pacific, Great Northern, and Northern Pacific railroads reflecting enthusiasm for the model's output and potential to reduce train consists.[1][5][1]Production history
The EMD SD45 was manufactured by the Electro-Motive Division (EMD) of General Motors at its La Grange, Illinois plant from December 1965 to December 1971, with a total of 1,260 units produced for freight service on North American railroads.[6] Production rates varied annually but generally ranged from approximately 200 to 300 units per year, peaking during 1966–1968 amid strong demand from major carriers seeking high-horsepower locomotives for heavy-haul operations.[7] Notable orders included EMD order number 5708 for 30 units delivered to the Atchison, Topeka and Santa Fe Railway (ATSF) as numbers 1800–1829 between June and August 1966, and order number 5722 for 60 additional ATSF units numbered 1830–1889 from October to December 1966.[8] A passenger-oriented variant, the SDP45, incorporated steam generators for train heating and was built in smaller numbers, with 52 units produced from May 1967 to August 1970 primarily for railroads like the Erie Lackawanna (34 units) and Great Northern (8 units).[9] These units extended the SD45's frame by about 5 feet to accommodate the added equipment while retaining the 3,600-horsepower 20-cylinder 645E3 engine. Separately, EMD constructed seven experimental SD45X prototypes starting in June 1970 to test enhancements aimed at achieving 4,200 horsepower, including an upgraded turbocharger and improved cooling; these units were assigned to demonstrator service and the Southern Pacific Railroad. Production of the standard SD45 ceased by late 1971 due to ongoing reliability concerns with the 20-cylinder engine, particularly crankshaft failures caused by torsional stresses and block flexing under load, which increased maintenance demands and operational costs.[10] EMD addressed these issues in the successor SD45-2 model, which entered production in May 1972 with reinforced components for improved durability.[6]Technical specifications
Engine and mechanical components
The prime mover of the EMD SD45 is the EMD 20-645E3, a turbocharged 20-cylinder two-stroke diesel engine arranged in a 45-degree V configuration.[2][1] It delivers 3,600 horsepower at a maximum speed of 904 rpm, enabling high tractive effort for heavy freight service.[1] The engine features a bore of 9-1/16 inches and a stroke of 10 inches, resulting in 645 cubic inches of displacement per cylinder.[2] Power from the prime mover is transmitted electrically via the EMD AR10 main alternator, which generates three-phase AC power rectified to DC for the traction system.[1] The AR10 provides rectified DC output at nominal 600 volts to meet traction demands.[1] This alternator couples directly to the engine crankshaft via a flexible coupling and is blower-cooled for reliability under load.[2] The SD45 employs six EMD D77 DC series-wound traction motors, one per axle in a C-C truck arrangement, providing robust low-speed adhesion.[2][1] These force-ventilated, axle-hung motors operate with a standard gear ratio of 62:15 on 40-inch wheels, yielding a top speed of 71 mph.[2] Cooling for the prime mover and auxiliaries relies on a pressurized water system with two centrifugal pumps circulating through radiators ventilated by two AC motor-driven fans.[2] The system includes an oil cooler and automatic temperature regulation, with a total cooling water capacity of 288 gallons and lubricating oil capacity of 294 gallons in the standard sump.[2] Auxiliary systems feature a 10 kW DC generator for control and battery charging, plus a two-stage air compressor delivering 254 cubic feet per minute.[2] Early production SD45 units suffered from crankshaft failures due to high torsional stresses in the long 20-cylinder design, causing fatigue breaks and extended downtime.[1] EMD addressed this through a redesigned 12-bearing crankshaft and engine block modifications implemented by 1968, improving durability in subsequent builds.[1]Dimensions and capacities
The EMD SD45 measured 65 feet 8 inches (20.02 m) in length over the pulling faces of the couplers, with a width of 10 feet (3.05 m) and a height of 15 feet 7 3/16 inches (4.75 m) from the top of the rail to the top of the cooling fan guard.[1][2] Starting with some units produced in early 1968, the length was extended slightly to 65 feet 9.5 inches (20.05 m) to accommodate minor frame adjustments.[11] The locomotive weighed 368,000 pounds (167,000 kg) when loaded on standard HT-C freight trucks.[2] Fuel capacity was 3,200 US gallons (12,113 L) in a single underframe tank, while sand capacity totaled 56 cubic feet (1.6 m³) across two 28-cubic-foot (0.79 m³) tanks located atop the hoods for external filling.[2] Production variants introduced differences in dimensions. The SDP45, a passenger-hauling adaptation with an integrated steam generator, extended the length to 70 feet 8 inches (21.54 m) to house the additional equipment. Similarly, the experimental SD45X demonstrator units measured 70 feet 8 inches (21.54 m) in length, reflecting their longer frame designed for enhanced power testing.[1]Operational history
Railroad operators
The EMD SD45 was primarily operated by major Class I railroads in the United States, with the largest fleets concentrated among western carriers for heavy freight service. The Southern Pacific Railroad acquired the largest number of SD45s, totaling approximately 319 units for the SP proper and an additional 37 from its subsidiary, the St. Louis Southwestern Railway (Cotton Belt), for a system-wide fleet of 356 locomotives.[12] These were deployed extensively on challenging routes such as Donner Pass, where their 3,600 horsepower rating made them ideal for helper service on steep grades and long-haul freight trains across the Western United States.[13] The Atchison, Topeka and Santa Fe Railway (ATSF) purchased 125 SD45s, utilizing them on Southwest routes for fast freight and mixed traffic, leveraging their high tractive effort for efficient over-the-road performance.[1] Other significant original owners included the Norfolk and Western Railway with 65 units for coal and general freight in the East, the Pennsylvania Railroad with 100 units (later inherited by Penn Central), and the Erie Lackawanna Railway with 34 units assigned to eastern coal trains and hump yard service. The Union Pacific originally ordered 42 SD45s, with additional units acquired through mergers, while the Chicago & North Western had 98 for midwestern operations.[1][14] Burlington Northern, formed in 1970, inherited a substantial SD45 fleet totaling approximately 102 units from predecessors including the Great Northern (28), Northern Pacific (20), Chicago, Burlington & Quincy (15), and St. Louis-San Francisco (39), with 96 more purchased directly; these supported heavy freight across the northern transcontinental network.[1] Additional Class I operators included the Southern Railway (60 units for southern freights), Denver & Rio Grande Western (26 for mountain railroading), and Seaboard Coast Line (34 for southeastern service).[1][13] By the 1980s and 1990s, SD45 fleets began retiring due to high fuel consumption, emissions non-compliance with evolving regulations, and the arrival of more efficient successors like the SD40-2 and SD70 series. Post-merger consolidations absorbed remaining units: BNSF Railway inherited hundreds from BN and ATSF fleets, Union Pacific from SP and its own acquisitions, and Norfolk Southern from Penn Central and Erie Lackawanna successors, with many rebuilt or scrapped by 2023.[6]SD45X testing
The EMD SD45X represented an experimental evolution of the SD45 locomotive, with seven prototypes constructed by the Electro-Motive Division primarily between June 1970 and February 1971 to explore enhanced power and component upgrades. These demonstrators, numbered such as EMD 4201–4207, featured a modified 20-cylinder 645E3A diesel engine rated at 4,200 horsepower—a 600 horsepower increase over the standard SD45's 3,600 horsepower output. The design incorporated a lengthened frame extending 70 feet 8 inches to house expanded mechanical systems, including an experimental AR10 main alternator and water-cooled turbochargers for improved performance under high loads.[1][15][16][17] Testing of the SD45X units occurred on the lines of the Atchison, Topeka and Santa Fe Railway and the Burlington Northern Railroad from 1970 to 1972, focusing on their suitability for powering heavy drag freight trains in demanding conditions. Equipped with HTC trucks and a 62:15 gear ratio, the prototypes demonstrated a starting tractive effort of 92,000 pounds at 25% adhesion, highlighting their potential for superior haulage capabilities compared to production models. However, the elevated horsepower led to notably higher fuel consumption rates and emerging reliability issues, such as increased wear on engine components, which were observed during extended evaluation runs.[15][16][6] The SD45X program served as a testbed for several "Dash 2" technologies, including improved electrical systems and truck designs, directly influencing the subsequent production of the SD45-2 model introduced in 1972. Following testing, all seven units were acquired by the Southern Pacific Railroad, where they entered revenue service before being retired; none were preserved, with the prototypes ultimately scrapped or cannibalized for parts by the late 20th century.[1]Rebuilds and upgrades
SD45u program
The Atchison, Topeka and Santa Fe Railway (ATSF) initiated a major rebuild program at its San Bernardino Shops in California, converting 84 original SD45 locomotives into the SD45u configuration between 1979 and 1989. This effort addressed aging components and regulatory requirements, extending the operational viability of the fleet without the expense of purchasing new units.[18] The program targeted units from ATSF classes 1800-1889 and 5590-5614, retaining the core 20-cylinder 645E3 engine rated at 3,600 horsepower while incorporating upgrades for reliability and efficiency.[19] Key modifications included the installation of a new wide-nose cab to enhance crew comfort and visibility, aligning with improving safety standards for locomotive operations.[18] Electrical systems were updated with the AR10 alternator and improved cooling arrangements to better manage heat dissipation from the high-output prime mover, reducing maintenance needs and downtime.[19] These changes preserved the locomotive's six-axle, 391,500-pound design while modernizing critical systems for continued heavy freight service.[19] The rebuilds commenced in 1979, for example with unit 5300 (originally 1883).[20] By 1989, all 84 conversions were complete, with units renumbered into the 5300-5483 range to reflect their upgraded status. The program paused briefly in early 1984 before resuming, ensuring a steady output from San Bernardino Shops.[21] These SD45u locomotives significantly prolonged service life, operating reliably into the 2000s under the Burlington Northern Santa Fe (BNSF) following the 1996 merger, and provided substantial cost savings compared to acquiring replacement power.[18] Most units were retired between 2010 and 2020 as BNSF modernized its fleet with newer dash-2 series locomotives, though some were exported to other railroads for continued use.[18] As of 2025, all SD45u units have been retired from primary service.SD45R program
The Southern Pacific Transportation Company launched the SD45R rebuild program at its Sacramento Shops as part of the broader General Rehabilitation and Improvement Program (GRIP), converting 167 EMD SD45 locomotives—originally numbered in the 8800–9156 series and built between 1966 and 1968—into more reliable SD45R variants between December 1979 and March 1986.[22] These rebuilds addressed chronic reliability problems in the original SD45 fleet, such as crankshaft failures in the high-output 20-cylinder prime movers, by stripping units down to their frames and installing modernized components for extended service life.[22] Key modifications included derating the power output from the original 3600 hp to 3200 hp through fuel rack adjustments and new engine governors, which reduced stress on the retained 20-645E3 prime movers while improving fuel efficiency and overall availability.[22] The locomotives received updated cabs with modern wiring harnesses and EMD Dash-2 electrical cabinets for enhanced control systems, along with rebuilt carbodies featuring improved ventilation and lighting packages.[22] The program proceeded in phases, with the initial 7400 series (SP 7400–7481) completed primarily from 1979 to 1983, followed by the 7500 series (SP 7500–7566) from 1984 to 1986, resulting in a continuous numbering range of 7400–7566.[23] Operationally, the SD45Rs achieved up to 90% availability by the early 1980s, allowing their deployment in mixed freight services across Southern Pacific's network through the 1990s, where their balanced power and reliability proved cost-effective for drag freights and helper duties.[22] A number of units received further upgrades in later years, including some restoration to 3600 hp ratings and minor enhancements akin to SD45-2 specifications for continued performance.[22] Following the 1996 merger of Southern Pacific into the Union Pacific Railroad, approximately 143 SD45Rs joined the UP fleet without renumbering, serving in yard, local, and transfer roles until progressive retirements in the 2000s and 2010s due to fleet modernization and emissions regulations.[24] As of 2025, all SD45R units have been retired from primary service.Other modifications
In addition to the major rebuild programs, several Southern Pacific SD45 locomotives underwent unique one-off modifications at the railroad's Sacramento shops as part of the broader M-99 upgrade initiative, which ran from late 1979 to 1989.[22] One notable example was SD45 8837, rebuilt in October 1981 into the sole SD44R unit numbered 7399; this conversion retained the original SD45 carbody but replaced the 20-cylinder 645E3 engine with a 16-cylinder 645E3 prime mover rated at 3,000 horsepower, aligning it mechanically with SD40-2 standards while addressing fuel efficiency concerns during the early 1980s energy crises.[22][25] A small number of SD45s—approximately 20 units across various owners—were converted to SD40-series specifications in the late 1980s and early 1990s, primarily to reduce operating costs by swapping the high-maintenance 20-cylinder engine for a more reliable 16-cylinder 645E3 model producing 3,000 horsepower.[26] These rebuilds, often performed by Morrison-Knudsen or leasing firms like Helm Leasing, preserved the distinctive SD45 high-short hood and flared radiator profile but updated electrical systems and traction components to match contemporary SD40-2 or SD40-3 configurations, extending service life on secondary lines amid fluctuating fuel prices.[27] For instance, Helm Leasing rebuilt former Southern Pacific SD45 880 into an SD40M-2, incorporating modernized gearing and control systems for improved low-speed performance.[28] The Atchison, Topeka and Santa Fe Railway pursued analogous upgrades on its SD45-2 fleet, rebuilding 30 units into SD45-2u variants starting in February 1986 at San Bernardino shops, though these were not derived from original first-generation SD45s but featured phase II body styling with enhancements like air conditioning and reflective safety markings to boost reliability through the 1990s.[29] Similar minor modifications appeared on select original SD45s owned by Santa Fe, including retrofits for improved cooling and electrical redundancy. Miscellaneous conversions included pairing SD45s into cow-calf sets for heavy switching duties, where a powered "cow" unit provided control and propulsion for an attached cabless "calf" booster, as seen on railroads like the Union Pacific in the 1980s to handle yard transfer tasks efficiently without full locomotive overhauls.[30] Burlington Northern created slug sets from pairs of retired SD45s in the 1990s, converting one unit per pair into a low-power traction booster by removing the prime mover and retaining traction motors, which increased adhesion for hump yard operations while sharing power from the "mother" locomotive.[31] Overseas, Chicago Freight Car Leasing Australia (CFCLA) imported and rebuilt a handful of ex-North American SD45s in the late 1990s, adapting them with metric-standard components and auxiliary generators for Australian gauge networks to support regional freight amid local locomotive shortages.[32] These niche efforts, concentrated in the 1980s and 1990s, reflected railroads' strategies to prolong SD45 viability during economic pressures without committing to large-scale programs.Preservation
Preserved locomotives
Several EMD SD45 locomotives and variants have been preserved in museums and static displays across the United States, serving as tangible examples of the 1960s shift toward high-horsepower, six-axle diesel-electric freight power that revolutionized mainline railroading. These units, often retaining original or era-specific paint schemes, underscore the SD45's role in enabling heavier train loads and faster schedules during the transition from steam and early diesels to second-generation models equipped with the 20-cylinder 645-series engine. As of 2025, approximately 10-15 SD45-series locomotives remain preserved, predominantly from major carriers like the Southern Pacific, Norfolk & Western, and Erie Lackawanna, with ongoing interest in acquiring former BNSF examples to expand collections. No major additions to static displays have occurred since 2020, though preservation efforts continue to focus on units with unique historical features, such as rebuilds or bicentennial liveries. Key preserved examples include:- Southern Pacific No. 7457 (originally No. 8800, the first SD45 for Southern Pacific, rebuilt to SD45R in 1982): On static display at the Utah State Railroad Museum in Ogden, Utah, since its donation in 2002. This unit represents the pioneering Southern Pacific rebuild program that extended the life of over 160 SD45s, featuring upgraded components for improved reliability.[33]
- Norfolk & Western No. 1776: Preserved on static display at the Virginia Museum of Transportation in Roanoke, Virginia. Built in 1970 and painted in a special bicentennial scheme in 1976, it highlights the SD45's adaptability for high-priority freight service on the N&W's coal-hauling network.[34]
- Erie Lackawanna No. 3607: On static display at the National Museum of Transportation in St. Louis, Missouri. This 1967-built unit, restored to its original Erie Lackawanna maroon paint, exemplifies the locomotive's early adoption by eastern railroads for heavy freight duties.[35]
- Conrail No. 6670 (originally Erie Lackawanna No. 3639, an SDP45 passenger variant): Stored on static display at the Virginia Museum of Transportation in Roanoke, Virginia, pending potential relocation and restoration. Acquired in the late 2010s, it preserves a rare example of the SDP45's steam-generator-equipped design for mixed passenger-freight operations.[36]