Hubbry Logo
EMD GP60EMD GP60Main
Open search
EMD GP60
Community hub
EMD GP60
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
EMD GP60
EMD GP60
EMD GP60
View on Wikipedia
from Wikipedia
EMD GP60
Union Pacific 1107 in Clyman Junction, Wisconsin
Type and origin
Power typeDiesel-electric
BuilderGeneral Motors Electro-Motive Division (EMD)
ModelGP60, GP60M, GP60B
Build date1985 – 1994
Total produced294 GP60; 63 GP60M; 23 GP60B
Specifications
Configuration:
​
 • AARB-B
Gauge4 ft 8+1⁄2 in (1,435 mm) standard gauge
Length59 ft 9 in (18.21 m)
Fuel capacity3,700 US gal (14,000 L; 3,100 imp gal)
Prime moverEMD 16-710
Engine typeV16 diesel
Cylinders16
Performance figures
Power output3,800 hp (2,800 kW)
Tractive effort:
​
 • Starting390 kN (87,675 lbf)
 • Continuous340 kN (76,435 lbf)
Career
OperatorsSee list

The EMD GP60 is a model of 4-axle (B-B) diesel-electric locomotive built by General Motors Electro-Motive Division between 1985 and 1994.[1] The GP60 was EMD's first engine that was classified as a "third-generation" locomotive. Hidden behind the electrical cabinet doors on the rear wall of the cab, the GP60 concealed a trio of microprocessors that monitored and managed a host of engine, cooling system and control functions. The engine's on-board microprocessors replaced hundreds of wiring circuits, dozens of relays and all but one module card, making it an improvement among EMD's engines.

Power was provided by a 16-cylinder 710G3A diesel engine, which could produce 3,800 horsepower (2,800 kW). This locomotive was 59 feet 9 inches long and featured a 3,700-US-gallon (14,000 L) fuel tank. The GP60 series shared the same frame as the GP59. Cabless 'B' units of this locomotive model were also built; they were known as GP60B models. Units built with a North American Safety Cab were designated GP60M. These latter two types were purchased exclusively by the Atchison, Topeka and Santa Fe Railway. A total of 294 GP60, 23 GP60B and 63 GP60M units were built by EMD. Due to the mainstream focus of railroads on powerful six-axle units, and strict emissions standards, aside from the collaborations with Motive Power Incorporated, the GP60 is the last new EMD "Geep".

Railroads and models

[edit]
ATSF 331, a cabless GP60B, eastbound at Caliente, California.
BNSF 147, GP60M
BNSF 346, a former Santa Fe unit.
BNSF No. 200 is ex–GP60B No. 347, rebuilt by BNSF into a standard GP60 by installing a cab from an SD40-2.

Santa Fe followed its 40 standard-cab GP60s with an order for 63 custom GP60Ms. The GP60M featured North American Safety cabs, and was the only 60 Series B-B locomotive with this feature. The nose has a headlight that is slightly offset to the right to accommodate the front door. These were the first new units delivered in the road's revived "Super Fleet" Warbonnet Paint Scheme. Santa Fe GP60Ms 100–162 were delivered between May and September 1990.

23 GP60 B units were built, all for Santa Fe. Taking advantage of the cabless configuration, the dynamic brake equipment on the GP60B was moved forward and away from the prime mover. Santa Fe 325–347 were the only GP60Bs. Most of these remain in service with BNSF; one of them, GP60B 347, was rebuilt into a standard GP60 by applying the cab of a Union Pacific SD40-2 to the locomotive in 2010.

Rio Grande's first (and last) 60 series units were GP60s 3154–3156, built to SP specs in May 1990.

Southern Pacific purchased the first, last, and largest fleet of GP60s, ordering 195 units between December 1987 and February 1994. Nearly half of the SP Fleet was lettered for subsidiary Cotton Belt, but an even hundred were directly Southern Pacific.

Two units built for the Texas Mexican Railway were returned to lessor Helm Financial after Kansas City Southern acquired the "Tex Mex". The pair operated for a while in lease service on CSX, then were briefly on the roster of the Vermont Railway System (VRS) as its 381–382 before that carrier deemed them unsuitable for its operations. 381 was even repainted into VRS red and white before being returned to Helm in 2004. These units were then sold to BNSF as No. 168 and No. 169.

Original owners

[edit]
EMD GP60 orders
Railroad Quantity Road numbers Notes
Atchison, Topeka and Santa Fe Railway 40 4000–4039 To BNSF 8700–8730, 8732–8739 (ATSF 4031 wrecked and retired); to BNSF 159–197 in 2014
U.S. Department of Energy (SROX) 1 106 Used at the Savannah River Site near Aiken, South Carolina.
Denver and Rio Grande Western Railroad 3 3154–3156 Now owned by Union Pacific Railroad and renumbered UP 1900–1902. 1900-1901 later renumbered 1168 and 1081 respectively.[2]
EMDX 3 EMD 5–7 GP60 Demonstrators. Now owned by CSX Transportation and numbered CSXT 6897–6899.
Norfolk Southern 50 7101–7150 7100 was originally 7117. The unit was involved in a fatal accident in which the conductor was killed, and after being repaired in July 1998, at the request of the victim's family that NS no longer use that number, was renumbered NS 7100. Units 7137, 7138, and 7143 were damaged when NS train 226 rear-ended another NS train. 7137 was destroyed. 7143 was later scrapped, but 7138 was repaired and placed into service.
Southern Pacific Railroad 100 9600–9619, 9715–9794 Now with Union Pacific Railroad and renumbered UP 1902–1921, 2015–2097. Now numbered 1000-1171 (some reclassified as GP62).[2] #9794 was the last domestic EMD GP-Series unit built for any railroad.
St. Louis Southwestern Railway 95 9620–9714 Now with Union Pacific Railroad and renumbered UP 1962, 1984–1987, 1990–1993, 1997–2000, 2003–2014. Now numbered 1004-1170. (some reclassified as GP62)[2]
Texas Mexican Railway 2 869–870 Later Helm Financial and renumbered HLCX 7700–7701. Both leased to the Vermont Rail System in February 2002 with 7700 being renumbered Vermont Railway 381 and 7701 being renumbered Green Mountain Railroad 382. Both returned and HLCX and renumbered back to 7700–7701 in September 2004. Sold to BNSF 168 & 169 in August 2011, renumbered 198–199 in 2014.
EMD GP60B orders
Atchison, Topeka and Santa Fe Railway 23 325–347 Now with BNSF Railway as BNSF 325–346 (347 rebuilt in 2010 with a cab from an SD40-2 and is now BNSF 170 and later “BN” 200, later changed to BNSF 200).
EMD GP60M orders
Atchison, Topeka and Santa Fe Railway 63 100–162 Now with BNSF Railway as BNSF 100–162 (142, 144, 148, and 152 wrecked and retired); BNSF 159–162 renumbered to 142, 144, 158, and 152 in 2014. All rebuilt to GP60M-3.
Totals 380

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

EMD GP60

View on Grokipedia
from Grokipedia
The EMD GP60 is a four- (B-B) diesel-electric road-switcher manufactured by the Electro-Motive Division (EMD) of from 1985 to 1994, featuring a 3,800-horsepower 16-cylinder 710G3A prime mover and microprocessor-based controls for enhanced performance in mainline freight operations. With a total weight of 270,000 pounds, dimensions of 59 feet 2 inches in length, 15 feet 7.5 inches in height, and 10 feet 4.5 inches in width, it represented the pinnacle of EMD's "Geep" series, delivering 950 horsepower per for priority train service. Introduced as the final high-horsepower model in EMD's long-running GP line, the GP60 evolved from earlier designs like the GP50 by incorporating advanced electronic systems and aerodynamic elements in its demonstrators, though production units retained a more conventional appearance. Built primarily at EMD's facility, it marked the transition to third-generation locomotives with the 710-series engine, offering improved reliability and fuel efficiency over predecessors. Production totaled 294 standard GP60 units, part of a broader family exceeding 400 locomotives when including variants. Key variants included the GP59, a 3,000-horsepower 12-cylinder model produced from 1985 to 1989 for emissions-sensitive applications, with only 36 units built; the GP60M, a 1990 "" version with a wider, more ergonomic cab for crew comfort, of which 63 were produced; and the cabless GP60B booster units, numbering 23 and used in multi-locomotive consists for added power without duplicate cabs. These adaptations addressed specific railroad needs, such as the Atchison, Topeka and Santa Fe Railway's order of 40 standard GP60s, 63 GP60Ms, and 23 GP60Bs in its iconic red-and-silver warbonnet . Major purchasers included the Southern Pacific Railroad, which acquired 195 units (the largest fleet) for its freight network, often in standard cab configuration with Cotton Belt-inspired lettering; Norfolk Southern, with 50 units for Eastern U.S. service; and smaller orders like three for the Rio Grande and two for the Texas Mexican Railway. As of 2025, surviving examples primarily operate under Union Pacific (inheriting ex-Southern Pacific and Rio Grande units), BNSF Railway (ex-Santa Fe and Texas Mexican), Norfolk Southern (original owner of 50 units), and a few on CSX Transportation (ex-demonstrators), often in secondary or local service roles as six-axle models have supplanted them for heavy intermodal hauling. The GP60's legacy endures as a symbol of late-20th-century diesel innovation, balancing power, versatility, and efficiency before the industry's shift toward AC traction and higher-axle designs.

Development

Background

The EMD GP series, initiated with the GP40 in 1965 as a high-horsepower four-axle road-switcher, evolved through subsequent models to meet growing railroad needs for versatile freight service. The GP50, introduced in 1980, marked a significant advancement by incorporating microprocessor-based controls for the first time in production locomotives, enabling improved monitoring and efficiency over the relay-based systems of earlier models like the GP40-2. This shift toward electronic integration continued with the GP59 in 1985, a low-emissions variant tailored for specific operators, reflecting EMD's focus on adapting to regulatory and operational pressures during the decade. By the mid-1980s, these developments emphasized higher and reliability, setting the stage for the next generation of General Purpose locomotives. In the mid-1980s, the railroad industry faced increasing demands for locomotives that balanced enhanced fuel economy, greater operational reliability, and compliance with emerging emissions standards, driven by rising fuel costs and environmental regulations. These pressures prompted EMD to develop the 710-series engine, a two-stroke diesel design that offered up to 25% better fuel efficiency and reduced emissions compared to the preceding 645-series, while maintaining modular components for easier maintenance. The 710G3A variant, in particular, powered the GP60 and addressed these needs through improved combustion and electronic fuel management. The GP60 prototype was announced and entered initial testing in , with three demonstrator units evaluated across various railroads to showcase its capabilities. Classified as EMD's first "third-generation" , it integrated advanced electronic systems, including comprehensive controls for , braking, and diagnostics, surpassing the partial of prior models. Three GP60 demonstrator units were completed in October at EMD's facility, marking the transition to production at the London, Ontario plant for customer units and initiating a series that would become the final high-horsepower entry in the GP line.

Design Evolution

The EMD GP60 represented a significant advancement in design by introducing the wide-nose "" as an optional feature, aimed at enhancing and safety through increased interior space, improved visibility, and better crash energy management compared to the standard cab on earlier GP models like the GP50. This cab design, with its broader front profile and padded interior, addressed growing regulatory and operational demands for crew protection during collisions, marking its first widespread implementation on production locomotives during the GP60's build period. Building on electronic innovations from prior EMD models, the GP60 integrated microprocessor-based control systems to manage settings, dynamic and air braking, and real-time diagnostics, which streamlined operations by replacing numerous mechanical relays and linkages with programmable logic for greater precision and fault detection. These systems reduced overall mechanical complexity, lowered needs, and allowed for adaptive , evolving from rudimentary electronic controls in the 50-series to more integrated in the GP60 era. The shifted to the 16-710G3A , a direct successor to the problematic 645F series and an evolution of earlier 710 variants like the G3, featuring enlarged displacement from 645 to 710 cubic inches per for enhanced while resolving cracking issues in the uniflow-scavenged 645 through refined block casting and cooling. This incorporated upgraded turbocharging and systems derived from iterative 710 developments, providing more reliable operation under sustained high loads than its predecessors. Structural refinements included frame extensions for distributed weight and compatibility with higher-speed operations, paired with the standard HT-C high-tension trucks that featured advanced primary suspension and lateral to deliver superior ride quality over uneven track and support elevated efforts without excessive wheel slip. These trucks, with their bolsterless design and hydraulic dampers, evolved from earlier EMD freight trucks to prioritize stability for fast freight service. Aesthetic and functional updates in the phase II body configuration refined the carbody for better and serviceability, notably through revised intakes with altered grille patterns and door arrangements to optimize airflow and cooling under demanding conditions, distinguishing it from phase I units' more basic venting. These changes maintained the GP60's streamlined profile while accommodating the increased thermal demands of the 710G3A engine.

Technical Specifications

Engine and Powertrain

The EMD GP60 is equipped with a 16-cylinder, two-stroke , which serves as the primary power source. This delivers 3,800 horsepower (2,800 kW) at a maximum speed of 900 rpm and features a displacement of 710 cubic inches per cylinder, with a bore of 9.08 inches and stroke of 10 inches. The design incorporates turbocharging to boost power output by utilizing exhaust gases and aftercooling to enhance by lowering intake air temperature. Power from the engine is converted and transmitted via an AR22 main alternator, which generates electrical output for the traction system. This feeds four D87 series DC traction motors, one per on the B-B configuration, enabling a top speed of 65 mph and a starting of 65,000 lbf at 20% . The gear ratio of 62:15 optimizes the balance between speed and pulling power for freight service. The fuel system supports capacities ranging from 3,700 to 4,000 gallons depending on the specific configuration and operator requirements, allowing extended operation without frequent refueling. delivery uses mechanical unit injectors managed by the locomotive's on-board microprocessors, which optimize injection timing and quantity for improved and reduced fuel consumption. Cooling is handled by a system with 240 gallons of cooling capacity, circulated by electric fans to dissipate from the and related components. The integrates with the in the two-stroke cycle, where intake and exhaust occur simultaneously through ports in the walls, promoting compact and high . is incorporated via resistor grids that convert from the traction motors into during deceleration, with the grids cooled by the locomotive's fans to maintain performance. For emissions, the GP60 complied with prevailing 1990s standards primarily through engine design optimizations.

Dimensions and Performance

The EMD GP60 features standard dimensions of 59 feet 9 inches (18.2 m) in length over couplers, 10 feet 6 inches in width, and 15 feet 2 inches in height over the cab roof. These measurements accommodate the locomotive's B-B truck arrangement and ensure compatibility with standard freight car clearances on North American railroads. The locomotive's weight is 270,000 pounds (122 metric tons), depending on fuel load, sand capacity, and optional equipment such as larger fuel tanks or auxiliary generators. This mass contributes to effective weight distribution across the HT-C trucks, enhancing adhesion for reliable operation in varied terrain. In terms of performance, the GP60 delivers a starting tractive effort of 65,000 lbf at 20% wheel slip and a continuous tractive effort of 62,400 lbf at 11.1 mph. Its maximum speed of 65 mph supports applications in mixed freight and drag services, where balanced acceleration and sustained pulling power are essential. Safety features are integrated into the body design, including forward-facing ditch lights mounted on the pilot for improved visibility during horn activation, as required by federal regulations for locomotives built after 1986. The air chime bell is typically positioned on the side frame or under the walkway, facilitating clear audible warnings in operational environments.

Production and Variants

Model Variants

The EMD GP60 was produced in several configurations, each adapted for specific operational needs in freight service, with the family including the GP59 (36 units) and the main GP60 line totaling 380 units (294 GP60, 63 GP60M, 23 GP60B). The standard GP60 featured a cab-equipped design with a 3,800 horsepower 16-710G3A engine, intended as a high-speed road-switcher for mainline duties. The GP60 measures 59 feet 9 inches in length overall. Production is divided into phases based on minor detail changes, such as the shape of the dynamic brake housing and hood door configurations, rather than overall dimensions. The GP60M variant featured a wide North American Safety Cab in the standard position, providing improved and safety for the crew compared to the conventional cab. This model retained the same power output and frame as the standard GP60 but featured a broader hood for better and visibility from adjacent units. Complementing this was the GP60B, a true booster unit without any cab or control stand, designed exclusively for multi-unit operation to provide additional traction in high-power consists. The GP60B shared the GP60's engine and electrical systems but omitted structure entirely, resulting in a lighter, more cost-effective configuration for trailing positions. As a precursor to the full GP60 lineup, the GP59 offered a low-emissions alternative with a 3,000 horsepower 12-710G3A , specifically tailored for environmentally sensitive areas. This model used a detuned prime mover to meet early regulations.

Production History

The EMD GP60 series entered production in October 1985 and continued until January 1994, resulting in a total of 380 units manufactured, comprising 294 GP60 models, 63 GP60M models, and 23 GP60B models. These locomotives were primarily assembled at the General Motors Diesel (GMD) facility in , , with the exception of three demonstrator units built at EMD's LaGrange, plant. The series marked EMD's final major push into high-horsepower four-axle road locomotives, powered by the newly introduced 16-710G3A . Production reached its peak between and , during which the majority of units—over 200—were delivered to meet surging demand from major railroads. Early output focused on Phase I configurations from 1985 to 1989, characterized by standard cabs and rounded dynamic brake housings. This evolved into Phase II starting in 1990 through 1994, incorporating refinements such as angular dynamic brake intakes, revised hood door latches, and recessed housings, with wide-cab designs becoming standard on the GP60M variant for improved crew comfort. Manufacturing of the GP60 series concluded in 1994 as railroads increasingly favored six-axle models like the SD60 for heavier freight loads, reflecting broader industry shifts toward more versatile power configurations following the era. The relatively modest total production run underscored the transitional role of four-axle units in an era prioritizing tonnage-hauling capability over speed-focused service.

Operational History

Original Owners

The EMD GP60 series, including variants like the GP60M, GP60B, and GP59, saw its initial production units delivered starting in late with three demonstrators built for testing purposes. These units were later leased to Locomotive Leasing Partners (LLPX) as numbers 6001-6003 before being acquired by in 1999-2000 as 6897-6899. Bulk orders followed in the late 1980s amid the economic recovery, with major Class I railroads purchasing the locomotives for high-speed freight and intermodal services on key routes. The Atchison, Topeka and Santa Fe Railway (ATSF) was the first production customer, ordering 40 standard-cab GP60s in 1988-1989 (numbered 4000-4039), followed by 63 GP60M wide-cab units in 1990 (100-162) and 23 cabless GP60B boosters in 1991 (325-347). These were intended for high-speed intermodal and transcontinental freight operations, often running in matched sets on priority time-sensitive trains across the railroad's extensive network. Southern Pacific Transportation Company placed the largest orders, acquiring 100 GP60s between 1987 and 1994 (9600-9619, 9715-9794), supplemented by 95 units for its (SSW, ) subsidiary in 1988-1990 (9620-9714) and 3 for the Denver & Rio Grande Western (D&RGW) in 1990 (3154-3156). These locomotives were deployed in fast freight and intermodal services, including coast-to-coast runs, as well as drag and hump yard operations to leverage their high horsepower and reliability. Norfolk Southern Railway ordered 93 GP60s in 1991-1992 (7101-7150, later adjusted) and became the sole customer for the low-emissions GP59 variant with 33 production units in 1989 (4609-4641), plus 3 demonstrators from 1985 renumbered as 4606-4608. The GP60s were assigned to fast freight applications on the railroad's mainline network, while the GP59s targeted environmentally sensitive areas requiring reduced emissions. Smaller orders included 2 GP60s for the Texas Mexican Railway (TM) in 1990-1991 (869-870) for general freight service and 1 for the Westinghouse Savannah River Project (WES) in 1991 (106) for site-specific operations at the Savannah River nuclear facility. These niche purchases highlighted the model's versatility beyond major carriers.

Subsequent Operators and Rebuilds

Following the 1996 mergers, the Burlington Northern Santa Fe Railway (BNSF) inherited the Atchison, Topeka and Santa Fe Railway's (ATSF) entire fleet of 126 GP60-series locomotives, comprising 40 standard-cab GP60s, 63 wide-cab GP60Ms, and 23 cabless GP60B booster units, which were integrated into BNSF's operations for secondary and local freight service. Similarly, Union Pacific Railroad (UP) acquired 191 GP60s from the Southern Pacific Transportation Company (SP, including its St. Louis Southwestern Railway subsidiary) and 3 from the Denver and Rio Grande Western Railroad (DRGW), totaling 194 units that bolstered UP's roster for comparable duties across its expanded network. These redistributions preserved over 200 GP60-series locomotives in active Class I fleets by the early 2000s, with minimal early retirements due to the model's robust 3,800-horsepower 16-710G3A engine design. UP initiated rebuild programs to extend the service life of its GP60 fleet, converting 16 units to GP62 configuration between 2013 and 2016 at facilities including UP's Fort Worth shop, primarily to enable long-hood-forward operation for improved crew visibility and safety. From 2019 to 2023, UP further modernized 33 GP60s into GP60E variants at its Jenks shop in , incorporating updated control systems, remanufactured prime movers, and emissions-compliant modifications to meet EPA Tier 0+ standards, projecting operational viability into the 2030s for yard and local assignments. BNSF has not pursued similar large-scale rebuilds, opting instead for routine overhauls to maintain its inherited ATSF units in service. A limited number of GP60s have been exported or transferred for use beyond original Class I operators, including two ex-BNSF units acquired by the Texas Mexican Railway (a subsidiary) in the early 2000s for border freight operations. By the , fewer than a dozen GP60s entered shortline or industrial service, such as isolated units on regional carriers like the (which holds two ex-EMD demonstrator GP60s in storage) and potential industrial applications in or sectors, reflecting the model's transition from mainline to lighter-duty roles. As of 2025, retirement trends show approximately 100 GP60-series units scrapped, wrecked, or placed in long-term storage across major operators, driven by age-related wear and the shift toward six-axle locomotives for heavy-haul efficiency, though over 250 remain operational in secondary service on BNSF and UP rosters. BNSF retains approximately 54 active GP60Ms, 42 GP60s, and 4 GP60Bs (totaling about 100 GP60-series units), primarily for yard duties in the Southwest, while UP's fleet, including rebuilt units, supports similar localized operations. Notable incidents involving GP60 fleets include isolated derailments, such as a 1996 BNSF event where an ex-ATSF GP60 contributed to a freight due to track conditions, but no widespread model-specific failures like cooling issues on ex-SP units were documented in the .

References

  1. https://www.american-rails.com/836061.html
  2. https://www.trains.com/trn/railroads/locomotives/the-evolution-of-emds-gp60-series-locomotives/
  3. https://www.american-rails.com/786251.html
  4. https://ww2.arb.ca.gov/sites/default/files/classic/research/apr/reports/l343.pdf
  5. https://s7d2.scene7.com/is/content/Caterpillar/CM20170915-60253-59723
  6. https://www.progressrail.com/en/Segments/Locomotive/Engines/RailEngines.html
  7. https://legacy.sae.org/gsdownload/?prodCd=860754
  8. https://www.industrialmarinepower.com/history-of-the-emd-645-and-710-/
  9. https://www.american-rails.com/710.html
  10. https://utahrails.net/loconotes/EMD_HTC-Truck_ASME_72-RT-3_March-1972.pdf
  11. https://trainiax.net/mephase-emdgp60.php
  12. https://www.neptunus-power.com/diesel-engine/emd-710/
  13. http://thedieselshop.us/Data%20EMD%20GP60.HTML
  14. https://dieselnet.com/news/2007/01up.php
  15. https://www.ijsrd.com/articles/IJSRDV6I60142.pdf
  16. http://www.nsdash9.com/rosters/7100.html
  17. https://www.trovestar.com/catalog/item/144853
  18. https://ww2.arb.ca.gov/sites/default/files/classic/research/apr/past/a032-169&92-917b.pdf
  19. https://www.trains.com/mrr/news-reviews/reviews/staff-reviews/athearn-ho-scale-emd-gp60-diesel-locomotive-is-a-runner/
  20. https://www.athearn.com/on/demandware.static/-/Sites-athearn-us-Library/default/dw5c72664e/announcements/august-2023/03_ATHHO_GP60_072823.pdf
  21. http://www.trainweb.org/jaydeet/gp6059.htm
  22. https://utahrails.net/up-diesel-roster/up-diesel-roster-33.php
  23. https://www.thedieselshop.us/UP.HTML
  24. https://www.up.com/aboutup/funstuff/locomotive-roster/index.htm
  25. https://www.thedieselshop.us/BNSF.HTML
  26. https://www.trainorders.com/discussion/read.php?1,5409707
  27. https://images.spinics.net/rail/RAR9605.pdf
Add your contribution
Related Hubs
User Avatar
No comments yet.