.jpg/250px-Ferrari_GG50_-_Museo_Ferrari_(17515678863).jpg){kind=small}
.jpg/2000px-Ferrari_GG50_-_Museo_Ferrari_(17515678863).jpg)
Community hub
0 subscribers8 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to Ferrari GG50.
Nothing was collected or created yet.
Ferrari GG50
View on Wikipediafrom Wikipedia
.jpg)
The Ferrari GG50 is a concept car created by Ferrari to mark the fifty years during which Giorgetto Giugiaro had been designing cars. It was introduced at the 2005 Tokyo Motor Show.
Engine and performance
[edit].jpg)
The Ferrari GG50 has special modifications inspired by Formula 1, to improve performance. It uses a 65 degree V12 naturally aspirated petrol engine. The engine develops peak power of 540 horsepower (403 kW), which is 94 horsepower (70 kW) per litre. The compression ratio is 11.2:1. The GG50 uses a sequential mode automatic transmission.[1]
Design
[edit]The GG50 is a 2+2 coupé "supercar". The interior is mostly carried from the Ferrari 612 Scaglietti on which it is based, as well as part of the exterior design. The exterior body is around four inches shorter and has a differently shaped nose.[2] Some cues, such as the steering wheel, derive from Ferrari's F1 vehicles of the past. Unique parts of the GG50 are its dashboard and the fact that the GG50 uses the Pioneer AVIC–X1R satellite navigation system.[3]
References
[edit]- ^ "Ferrari GG50 by Giorgetto Giugiaro". www.classicdriver.com. Retrieved 30 June 2017.
- ^ "Giorgetto Giugiaro hatches Ferrari GG50 concept". Evo. 2 November 2005. Retrieved 30 June 2017.
- ^ "2005 Ferrari GG50 Concept - Images, Specifications and Information". Ultimatecarpage.com. 19 October 2005. Retrieved 30 June 2017.
External links
[edit]- Tokyo Motor Show 2005 Highlights (Ferrari GG50 seen on page)
- Ferrari GG50 Information from ConceptCarz.com
Wikimedia Commons has media related to Ferrari GG50.
Ferrari GG50
View on Grokipediafrom Grokipedia
Background
Giugiaro's design legacy
Giorgetto Giugiaro began his illustrious career in automotive design in 1955 at the age of 17, joining Fiat's styling center in Turin, where he quickly rose to prominence for his innovative sketches and prototypes. By 1968, Giugiaro had founded Italdesign Giugiaro S.p.A., a pioneering design studio that would go on to shape the aesthetics of over 200 production car models across numerous manufacturers, resulting in more than 60 million vehicles produced worldwide.[4] His portfolio includes iconic designs for brands such as Volkswagen (e.g., the Golf Mk1), Alfa Romeo, and Fiat, blending sharp angular lines with functional elegance that defined late-20th-century automotive styling.[5] Among his early contributions were bespoke Ferrari bodies, such as the 1962 250 GT Bertone, which showcased his emerging talent for sculptural forms on high-performance chassis during his tenure at Bertone.[6] The Ferrari GG50 stands as a personal milestone in Giugiaro's career, named after his initials (GG) and the "50" denoting five decades since his debut in 1955.[7] Conceived as a self-commissioned project to celebrate this anniversary, Giugiaro envisioned the car as a family-oriented Ferrari that reflected his lifelong passion for the marque, drawing on his deep-rooted connections to Italian automotive heritage.[3] This one-off prototype exemplifies his enduring influence, serving not only as a retrospective homage but also as a testament to his evolution from youthful prodigy to design legend, honored as the "Car Designer of the Century" in 1999 by a global jury of automotive experts.[5] Italdesign played a central role in realizing the GG50, handling both the conceptual design and the complete construction of the fully operational vehicle as a bespoke tribute.[7] This collaboration underscores Ferrari's longstanding tradition of partnering with esteemed Italian design houses, such as Pininfarina and Italdesign, to push the boundaries of automotive artistry.[8] Through the GG50, Giugiaro's legacy is encapsulated in a singular artifact that honors his contributions to an industry he helped transform.Platform origins
The Ferrari GG50 concept car served as a modified iteration of the production Ferrari 612 Scaglietti grand tourer, preserving its core front-engine, rear-wheel-drive architecture and 2+2 seating arrangement designed for versatile grand touring.[7][9] This foundational setup allowed the GG50 to maintain the 612's emphasis on balanced dynamics suitable for both high-speed travel and everyday usability.[1] Among the key shared elements were the 2.95-meter wheelbase, which provided proportional stability, and select components of the aluminum spaceframe chassis, constructed from extruded aluminum sections joined by castings to achieve a lightweight yet rigid structure.[9] These features underscored the overarching grand tourer ethos of integrating exhilarating performance with refined luxury, a hallmark of the 612 Scaglietti platform.[1] In contrast to the standard 612 Scaglietti, the GG50 represented a more compact evolution intended to hint at prospective Ferrari design directions, with its body shortened by 9 centimeters to a total length of 4.81 meters for enhanced visual agility and modernity.[3][10] This adaptation by Italdesign Giugiaro refined the silhouette while staying true to the platform's engineering heritage.[7]Development
Conception and inspiration
The idea for the Ferrari GG50 originated in September 2004 during the Paris Motor Show, where designer Giorgetto Giugiaro discussed with Ferrari executives, including Vice Chairman Piero Ferrari who approved the idea immediately, the concept of a personal tribute car to mark his 50 years in automotive design; Chairman Luca Cordero di Montezemolo selected the Ferrari 612 Scaglietti as the base model.[1][8] Giugiaro's inspiration stemmed from his ambition to create a more compact grand tourer suitable for family use, blending the brand's grand touring heritage with greater compactness.[1][8] The project drew on the Ferrari 612 Scaglietti as its base platform, allowing Giugiaro to reimagine the proportions without altering the core mechanical setup.[1] Ferrari endorsed the initiative, granting Italdesign—Giugiaro's firm—full creative lead on the non-production concept, with no commercial production intent, under the condition that it align with the brand's image and be shorter than the donor vehicle.[8][7]Design and engineering process
The design and engineering process for the Ferrari GG50 commenced in February 2005 with hand-drawn sketches at a 1:10 scale, executed by Giorgetto Giugiaro using a 2H lead pencil on tracing paper, under his oversight as lead designer.[11] These initial concepts were subsequently digitized, translated into mathematical surfaces via CAD/CAS software, and rendered as a dynamic 1:1 scale visualization within Italdesign's Virtual Reality Design Center.[12] By mid-2005, specifically April, the process advanced to mathematical modeling and the creation of a full-scale plaster model through milling, enabling detailed ergonomic assessments and refinements to interior access.[1] Italdesign's in-house engineering team then adapted the underlying chassis from the Ferrari 612 Scaglietti, shortening the overall body length by 9 cm to 4.81 m—achieved by trimming 2 cm from the front overhang and 7 cm from the rear—while maintaining the original 2.95 m wheelbase and structural integrity through targeted reinforcements, such as a reinforced roof edge cross-member for the new hatchback configuration, all optimized using CAD for precision.[1][12] This included repositioning the 95-liter fuel tank below the boot line to accommodate a flat load platform.[11] Prototype assembly began in June 2005 at Italdesign's facilities, resulting in a fully functional one-off vehicle that underwent testing for drivability to validate the modifications, though it was not evaluated for production viability.[11] The completed GG50 debuted at the 2005 Tokyo Motor Show.[3]Design
Exterior features
The Ferrari GG50 presents a compact 2+2 coupe silhouette characterized by a low-slung profile and a cab-forward cabin positioning, which visually diminishes its 4.81-meter length compared to the base Ferrari 612 Scaglietti.[13] This design achieves a leaner appearance through seamless flowing lines from the long bonnet—featuring a subtle V-crease—to the rounded nose and tail, eschewing sharp creases in favor of smoother curves at the headlamp cowl and front wheel arches.[14] Key exterior styling cues include slim vertical xenon headlights set in distinctive black crescent housings, positioned adjacent to the iconic oval grille flanked by vertical cooling air intakes and fog lamps for a cohesive front fascia.[13] The fastback roofline integrates a photochromic glass panel that merges continuously with the windshield and fenders, culminating in a gently curving rear wing serving as a subtle spoiler to aid stability.[15] The body construction employs aluminum panels welded to the spaceframe chassis, promoting lightness while maintaining structural integrity derived from the 612 Scaglietti platform.[16] Aerodynamically, the GG50 features tapered side extremities and smooth contours along the flanks to the rear wheel arches. The fastback tail enhances aerodynamics.[3] These elements, realized by Italdesign under Giorgetto Giugiaro, blend classic Ferrari proportions with innovative simplicity for enhanced presence and performance potential.[14]Interior layout
The Ferrari GG50 features a 2+2 seating configuration, with front sports seats upholstered in beige leather accented by red inserts for a luxurious yet sporty ambiance.[16] The rear seats are designed for occasional use by passengers, providing improved headroom and accessibility through a raised roofline and tapered side windows that reduce the cramped feel typical of grand tourers.[1] These rear seatbacks fold flat to form a 500-liter cargo platform, enhancing practicality for longer journeys while maintaining the car's grand touring heritage derived from the 612 Scaglietti.[16][14] The dashboard adopts a driver-centric layout, housing stock Ferrari analog gauges—including a central rev counter and speedometer—within a single hooded binnacle, complemented by a digital information screen for essential data.[16] A three-spoke steering wheel provides intuitive control, while the minimalist center console features a glossy dark grey panel with integrated Pioneer AVIC-X1R satellite navigation and five rotary air-conditioning dials, emphasizing ergonomic refinement over excess.[16] Luxury is further highlighted through beech wood inserts in door storage compartments and natural aluminum grab handles, creating a balanced blend of functionality and premium tactile quality.[16] Unique elements enhance the user experience, such as generous storage pockets integrated into the central console between front and rear seats, protected by flaps for secure access during travel.[17] A photochromic roof provides a seamless glass canopy effect with tinting capabilities, improving visibility and openness for occupants without compromising the coupe's structural integrity.[16] These bespoke touches underscore the GG50's focus on family-oriented grand touring comfort.[3]Specifications
Engine and drivetrain
The Ferrari GG50 features a 5.748-liter naturally aspirated 65-degree V12 engine, designated as the Tipo F133F and derived from the powerplant in the 612 Scaglietti.[16] This engine shares key components with the 612 platform, including its front-longitudinal mounting configuration.[9] Constructed with an aluminum block and heads, the V12 employs a DOHC setup with 48 valves, multi-point fuel injection, and variable valve timing to optimize performance across the rev range.[18][19] It delivers 540 horsepower at 7,250 rpm and 434 lb-ft of torque at 5,250 rpm.[20][21] The drivetrain is rear-wheel drive, incorporating a limited-slip differential integrated with the rear-mounted final drive for enhanced traction.[9][22] Power is transmitted via a six-speed automated manual gearbox with F1-style paddle shifters, offering sequential shifting without a traditional clutch pedal.[20][23]Dimensions and performance
The Ferrari GG50 measures 4.81 meters in length, 1.95 meters in width, and 1.347 meters in height, with a wheelbase of 2.95 meters.[24] Its curb weight is estimated at approximately 1,900 kg, reflecting modifications to the underlying platform for a more compact grand tourer profile.[20] The vehicle is fitted with 20-inch wheels and Bridgestone Potenza tires sized 245/35 ZR20 at the front and 305/35 ZR20 at the rear, providing enhanced grip suited to its rear-wheel-drive layout.[14] Powered by a V12 engine, the GG50 achieves 0-100 km/h acceleration in approximately 4.2 seconds and a top speed exceeding 320 km/h.[25] The GG50 features an independent double-wishbone suspension system with active damping, tuned specifically for its shortened body to deliver balanced handling dynamics.[23] It is equipped with Brembo ventilated disc brakes measuring 380 mm in diameter, ensuring robust stopping power in line with its grand tourer capabilities.[2]| Dimension | Measurement |
|---|---|
| Length | 4.81 m |
| Width | 1.95 m |
| Height | 1.347 m |
| Wheelbase | 2.95 m |
| Curb Weight | ~1,900 kg |
| Front Tires | 245/35 ZR20 |
| Rear Tires | 305/35 ZR20 |