Hubbry Logo
Hot SawHot SawMain
Open search
Hot Saw
Community hub
Hot Saw
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Hot Saw
Hot Saw
Hot Saw
View on Wikipedia
from Wikipedia

Hot Saw is an event or discipline in logging sports. It is also used to describe the type of saw used in the event, a high-powered chainsaw.

Overview

[edit]
Junior World Champion Ferry Svan practicing in 2017

This event is often the crowd's favourite,[1] and certainly the loudest. Compared to other logging sports using an axe or manual saw, this event uses a motor-powered chainsaw. However, to stick to the traditional ethos, the chainsaw must be either completely homemade or self-modified in some way, within certain restrictions; one required modification is for the competitor to add a super engine. The chainsaws are large and methanol-run. The saws used by top competitors are typically snowmobile or watercraft engines cut in half, and are far heavier than regular chainsaws.[2] The event has been described as "[m]ore of an engineering challenge than a day-of competition" because of this.[3] In it, competitors will cut cookies — circular disks from logs — of certain specifications as quickly as they can. Competitors view it as the hardest event, but also a favourite.[2] Before beginning the cut, they are usually allowed to warm up their saws in what is called the "pit row", often with mechanics.[4]

Saw-building

[edit]

The tools used for the event have been called the "most ridiculous modified chainsaw[s]",[3] and are known to walk the line between performance and failure due to their homemade nature.[1][4] However, as many as 99% of professional competitors don't build their own hot saw, instead buying them from specialist engineers, with 80% of saws on the American circuit built by Russ Lemke; Lemke's saws match reliability with power and have been called "the Stradivarius of its ilk" by Stihl. Several are also built and sold by event record-holder Matt Bush, who is also a talented saw-builder. Bush ran his saw at 404cc, about the highest that has been managed.[1]

The total cost of each hot saw is about $10,000 but can last for decades, with requirements in the event rarely changing. Lemke also recommends constant maintenance of the saws, but also talks about how saw-building is just as exciting as the event itself.[1]

Safety

[edit]

Due to the power of the chainsaws, safety is taken seriously. The athletes wear face and hearing protection, and chaps, sometimes with other chainsaw safety clothing, and there are shields protecting the audience because of the 20-foot throw of woodchips.[1] Competitors may also wear chainmail under their chaps, and many have saws with safety switches in case they get out of control and need to be quickly stopped.[5] All the people within 15' of a live hot saw must wear hearing protection, too.[6]

Variations

[edit]

Stihl Timbersports

[edit]
"Stihl" is burnt into or marked on the log and brands the resulting cookies

In Stihl Timbersports, the hot saw event sees competitors race to cut three cookies from a horizontal log. The first cut is going down, the second back up. The athletes have to be very strong and skilled, with chainsaws having a chain speed of 240 km/h, a weight of 27 kg, and engines typically having between 62 and 100 horsepower.[7][1] The Timbersports rules on hot saws are:[1]

  1. It is limited to one cylinder; this rule was put in place after Lemke showed up at the Wisconsin State Championship with a two-cylinder, seen as unfair and dangerous
  2. It has a tuned exhaust
  3. It has a sprocket cover

The competitor must cut no more than 6" from the log, which is marked with a black line. They will also be disqualified if their cookies are not whole.[2] Competitors are also allowed to have a helper, who performs two roles: getting the saw started in the warm-up beforehand, which is a minute, and also cool the saw down.[1]

The current world record is 4.62 seconds, achieved by Adam Lethco in 2022.[8][9]

Two-man competition

[edit]

Some competitions are designed for a hot saw that can be held by two woodsmen, often with larger engines that may have been originally designed for cars. Most of these are local.[3]

Lumberjack Championship

[edit]

In the Lumberjack World Championship, a one cylinder engine chainsaw is used to make three cuts, first down, then up in a white pine log. The chainsaws are off before the time starts, and cannot be self-starting or simple start engines. The record was set by Dave Bolstad of New Zealand in 2007 with a time of 5.55 seconds.[10]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Hot Saw

View on Grokipedia
from Grokipedia
A hot saw is a high-intensity discipline in lumberjack sports competitions, such as the STIHL TIMBERSPORTS series, in which competitors use customized, supercharged chainsaws to make three precise cuts on a horizontally mounted log, slicing off three complete wooden discs (known as "") within a marked 15 cm area as quickly as possible. The event demands exceptional strength, speed, and control, often lasting under 10 seconds, and is renowned for its deafening noise and the extreme difficulty of handling the powerful tool, which can weigh up to 30 kg and generate 60-80 horsepower. In professional competitions, athletes employ individually tuned chainsaws with modified engines and high-speed chains reaching up to 240 km/h, while intermediate levels use standard models like the STIHL MS 881 on smaller 40 cm logs. The rules require three alternating cuts—downward, upward, and final downward—starting with hands on the log, and strict safety protocols mandate protective gear including ear, eye, and leg protection; violations such as false starts, incomplete cuts, or unsafe saw handling result in disqualification. Often regarded as the pinnacle and most challenging event, the hot saw is typically the last discipline learned by competitors and serves as a decisive factor in championships, with the current world record standing at 4.28 seconds set by Nathaniel Hodges of the USA in 2025; Hodges also won the 2025 STIHL TIMBERSPORTS Individual World Championship. The hot saw emerged as part of the modern TIMBERSPORTS series, which originated in 1985 through a partnership with in the United States, building on centuries-old logging traditions from regions like , , , and the that date back to the mid-19th century. While early events focused on manual tools, the introduction of powered chainsaws in competitive formats like the hot saw reflected advancements in technology, evolving into a global spectacle with world championships, team events, and expansions to in 2001, Asia in 2018, and beyond. Today, it highlights athletic prowess in an "original ," drawing crowds to events where finely tuned machines and split-second precision determine victory.

Overview

Definition and Basics

Hot Saw is a discipline in logging sports competitions where athletes use highly modified chainsaws to rapidly cut three circular wooden discs, known as "cookies," from a stationary log. The objective is to complete the cuts as quickly as possible, showcasing a blend of strength, precision, and mechanical expertise. This event emphasizes explosive power and control, distinguishing it from endurance-based logging activities. The competition setup features a log anchored horizontally at approximately waist height for the athlete. The log typically measures 46 cm in diameter for professional divisions and is made from softwoods such as white or poplar to ensure consistent cutting conditions. Cuts must be made within a marked 15 cm section starting from one end of the log, requiring three precise slices—typically one downward, one upward, and another downward—to fully separate the cookies. Athletes have a brief warm-up period, up to 60 seconds in pro events, to start and rev the saw before the official timer begins upon their signal. The chainsaws employed, often called "hot saws," are custom-built racing models far exceeding standard tools in performance. These single-cylinder, two-stroke engines, frequently adapted from or components, produce 60 to 80 horsepower and weigh nearly 30 kg, with chain speeds reaching approximately 240 km/h. They run on high-performance fuels like to achieve such output and are distinct from everyday chainsaws due to extensive modifications, including tuned exhausts and reinforced components for safety and speed. In professional series like TIMBERSPORTS, these saws must meet strict regulations, such as mandatory chain catchers and covers. Events typically conclude in under 10 seconds for elite competitors, though the full run, including warm-up and any retries, operates under a one-minute limit, prioritizing speed and accuracy over prolonged effort. This brevity intensifies the focus on flawless execution, as any deviation beyond the marked zone or incomplete cookies results in disqualification.

Popularity and Appeal

Hot Saw competitions captivate audiences with their intense auditory and visual spectacle, often described as the loudest and most explosive discipline in sports due to the roar of high-powered chainsaws and the shower of flying wood chips created during rapid cuts. This raw energy transforms events into high-stakes displays of power and precision, where competitors execute three horizontal cuts on a log within seconds, drawing cheers from spectators who thrill to the chainsaw's speed exceeding 240 km/h. The event's media presence amplifies its global reach through international series like , which features live broadcasts on networks such as ABC and , alongside YouTube highlights of world record attempts that garner millions of views. As of 2019, with over 20 million annual viewers across more than 62 countries and approximately 2,000 contestants participating in local and global qualifiers, Hot Saw contributes to the broader appeal of lumberjack sports, fostering a dedicated around record-breaking performances. Participants in Hot Saw events typically include professional lumberjacks, skilled mechanics who customize the saws, and adrenaline-seeking athletes drawn to the discipline's high-risk, high-reward nature, with entry-level competitions serving as gateways for novices to develop expertise before advancing to professional circuits. These demographics span competitive backgrounds in and motorsports, emphasizing the event's blend of physical prowess and technical ingenuity. Economically, Hot Saw competitions bolster logging communities by attracting thousands to festivals that celebrate timber heritage, such as the World Championships, which attracts thousands of attendees, with recent events drawing nearly 8,000 spectators, and integrated events like those at Milwaukee's German Festival drawing 17,000 spectators. Held across , , and , these gatherings generate significant local revenue through ticket sales, vendor participation, and , while preserving cultural traditions tied to the industry.

History

Origins in Logging Sports

Hot Saw competitions trace their roots to the informal lumberjack games of the 19th and early 20th centuries in North American logging camps, particularly in the and , where workers tested their efficiency in tasks like logs with two-man saws and felled trees to simulate daily work demands. These activities evolved from the rugged conditions of remote camps, where competitions served as both entertainment and skill-building among during off-hours. By the mid-20th century, as chainsaws became standard tools in the industry following their widespread adoption after , these games began incorporating powered equipment to reflect technological shifts in practices. The Hot Saw event itself emerged in the 1970s and 1980s through local fairs and regional championships, where speed-cutting challenges with modified chainsaws built on traditional disciplines like cross-cutting and single-buck sawing. Sponsored tournaments, such as the Homelite Tournament of Kings starting in 1978, featured early chainsaw speed events that emphasized rapid log dissection, laying the groundwork for the high-performance format of Hot Saw. This period marked the transition from stock chainsaws to customized "hot" versions tuned for maximum power and speed, often drawing from practical logging innovations to create a thrilling spectator discipline. The development of Hot Saw paralleled post-World War II advancements in chainsaw design, including lighter, more powerful engines that replaced manual axes and crosscut saws in both industry and sport by the . Pioneers in Australian and North American logging communities, such as axemen who experimented with early adaptations in the mid-20th century, influenced the event's growth, leading to its inclusion in formalized U.S. competitions by the 1980s. These roots in practical forestry efficiency helped solidify Hot Saw as a staple of modern professional series like TIMBERSPORTS, launched in 1985.

Development and Milestones

The professionalization of Hot Saw competitions began with the formation of the TIMBERSPORTS series in 1985, initiated by the German company AG in collaboration with to elevate regional U.S. events into a structured international spectacle. Hot Saw emerged as a core discipline within this framework, showcasing athletes using highly modified chainsaws to slice through logs in explosive displays of power and precision, with early competitions documented as far back as 1997. By the early 2000s, the event had solidified its place alongside other disciplines like springboard chopping and stock sawing, contributing to the series' appeal through its high-speed, crowd-thrilling format. Key milestones marked the sport's ascent to global prominence. The inaugural TIMBERSPORTS Individual , incorporating Hot Saw, was held in 2005 in Virginia Beach, , establishing an annual pinnacle event for top athletes. This was followed by the launch of the European Championships in 2002. In parallel, Hot Saw evolved within longstanding festivals like the in , which began in 1960 and incorporated the discipline as part of its multi-event format, adapting from traditional contests to include modern power-tool challenges over decades of refinement. Performance records advanced dramatically, exemplified by U.S. athlete Adam Lethco's world-record time of 4.62 seconds in 2022 at the TIMBERSPORTS U.S. Championships, and Nate Hodges' subsequent shattering of that mark with a 4.28-second run in 2025 at the same event. The global spread of Hot Saw accelerated through STIHL TIMBERSPORTS expansions, with national series emerging in from 2001, and in 2015, and in 2018, leading to competitions across four continents involving over 1,000 athletes from more than 25 nations by the mid-2020s. Notable events include the 2024 World Trophy in , , where teams competed in Hot Saw among other disciplines, alongside ongoing Australian Pro Championships and emerging Asian national qualifiers. At the 2025 STIHL TIMBERSPORTS , New Zealand's Jack Jordan won the overall title, while claimed the Team . The sport's event calendar grew substantially, from a handful of U.S.-focused professional meets in the 1990s to national championships in 27 countries and dozens of international qualifiers by 2025, reflecting increased participation and media coverage.

Event Mechanics

Competition Format

In Hot Saw competitions, athletes must execute three sequential horizontal cuts—first downward, then upward, followed by a second downward cut—to sever three complete disks from a horizontally anchored log. The log typically measures 46 cm in diameter for professional events and is marked with a 15 cm zone at one end, within which all cuts must be made to avoid disqualification. Each run is limited to a maximum of 60 seconds, starting from the "go" signal after a brief warm-up period of 60 seconds on the competition stage for professional athletes, during which they may test their equipment. Time is officially recorded to the nearest hundredth of a second from the start signal until the third disk fully detaches and falls, with incomplete disks necessitating additional cuts within the time limit but risking penalties if the zone boundaries are exceeded. Disqualifications occur for incomplete sets of three disks, breakage mid-run, cutting beyond the marked zone, or any safety infractions such as improper saw handling. Professional events require pre-approval of competitors' saws by officials, including technical inspections to verify compliance with standards like single-cylinder engines and mandatory safety features such as chain catchers. Formats vary by stage, with single attempts per heat common in both qualifiers and for direct comparison, though a second chance may be allowed only for organizer-provided saws in cases of equipment failure (excluding chain breakage). This structure emphasizes both speed and precision, as evidenced by world records approaching 4 seconds in elite competitions.

Techniques and Strategies

In the Hot Saw , athletes begin with a 60-second warm-up period to prepare their , positioning their hands on the log before the starting signals the need for a rapid ignition and immediate engagement with . This quick-reaction start demands precise timing and coordination to minimize delays in the overall run. The core cutting strategy follows the standard three-cut rule: an initial downward cut from the top of the log to establish stability, followed by an upward undercut leveraging the athlete's body weight and positioning for control, and concluding with a final downward cut to sever the third disc within the 15 cm marked zone. Effective management is crucial throughout, allowing athletes to modulate power and prevent chain binding or stalls that could compromise speed and precision. Performing these maneuvers with a approximately 30 kg imposes intense physical demands, including upper-body strength to maneuver the tool at high chain speeds of around 240 km/h, balance on potentially uneven logs, and to sustain multiple high-intensity runs in a . Training regimens emphasize saw-handling simulations, such as exercises mimicking cutting motions to build , leg power, and forearm grip, alongside daily physical conditioning to enhance overall resilience. To optimize performance, athletes focus on meticulous and pre-competition saw maintenance for reliable power output, paired with chain sharpening to ensure clean, efficient cuts that reduce resistance. Developing mental fortitude through consistent practice and peer enables rhythmic execution and incremental time improvements, with elite competitors routinely achieving runs under 6 seconds by refining technique over raw strength.

Equipment

Building a Hot Saw

Building a hot saw requires specialized knowledge of and fabrication to create a high-performance capable of rapid cuts in competitive logging events. The process typically begins by selecting a base frame from modified commercial models, such as or Husqvarna units, which provides a foundation for integrating the . The core component is a single-cylinder , often sourced from snowmobiles or high-performance motorcycles and halved to fit the saw's configuration, delivering up to 80 horsepower for the explosive starts needed in three-cut competitions. Key assembly steps involve welding a custom guide bar, 46 cm in length, to the frame for precise log penetration, and fabricating or modifying a to handle the engine's high exhaust temperatures and . Builders then install an electronic to ensure reliable firing under high-revolution conditions and bore the cylinders to optimize compatibility with methanol-based fuels, which provide the necessary for short, intense runs. reduction is achieved through balanced components and adding weighted handles, followed by extensive testing to verify stability and performance. Sourcing parts often relies on specialists like Russ Lemke, a who has constructed numerous championship-winning hot saws over decades, emphasizing reliability in designs that start on the first pull. The average cost for a build ranges from $5,000 to $10,000, covering custom and high-quality components, with construction taking 1-2 months for experienced builders. Amateurs may attempt DIY versions using junkyard-sourced engines, though these rarely match competitive standards without refinement.

Technical Specifications

Hot saw utilizes a customized single-cylinder , typically producing 60 to 80 horsepower to enable rapid cuts in . These engines operate at high RPMs. The is tuned to optimize while adhering to one-cylinder limits set by rules. The cutting features a 3/8-inch pitch and 1.6 (0.063-inch) gauge, paired with a bar length of 46 (approximately 18 inches) in professional events to balance speed and control during one-handed operation. This configuration achieves a chain speed of approximately 240 km/h (66.7 m/s), facilitating quick disc cuts from the log. Intermediate-level hot saws use a 40 cm bar on the provided STIHL MS 881 model. Engines are tuned to run on methanol-based fuels for optimal in short bursts. Total weight ranges from 25 to 30 kg, incorporating ergonomic grips for secure one-handed handling and an exhaust design minimizing backpressure to sustain high output. Regulatory standards enforced by TIMBERSPORTS limit engines to one and require technical inspections for compliance, including chain catchers and covers; superchargers are not permitted under these rules. While custom hot saws deviate from production norms, adaptations focus on rather than emissions .

Safety

Competitor Protection

Competitors in Hot Saw events must wear mandatory (PPE) to mitigate risks from high-speed chains and powerful engines. Required gear includes hearing protection to counter the extreme noise levels exceeding 100 dB from the tuned s, eye protection compliant with standards such as CE EN 166 or ANSI Z87.1, and leg protection in the form of , typically made from layered or similar cut-resistant materials designed to entangle and stop a moving chain upon contact. No electronic hearing protection devices are permitted. Pre-run protocols emphasize equipment integrity and athlete readiness to prevent accidents during the high-stakes performance. Organization technicians perform comprehensive checks on Hot Saws, including visual inspections, running tests, and functional verification of safety features like chain catchers above the bar, chain covers, and rotor covers before competition. Athletes must demonstrate proper saw starting techniques, ensuring the chain brake engages correctly to halt the chain rapidly in case of loss of control. Medical clearance is required, with on-site medical personnel available to assess competitors for fitness, particularly given the physical demands of handling recoiling saws weighing up to 30 kg. Key injury risks in Hot Saw include chain-related cuts from kickback or , exhaust burns from hot components, and strains from the saw's violent startup and operation. Mitigations focus on preventive measures such as mandatory chain catchers and covers on the saw to retain a thrown , alongside throttle discipline to avoid sudden acceleration that could trigger kickback. On-site medics are stationed to provide immediate response to lacerations, burns, or other trauma, with event rules allowing athlete withdrawal based on medical evaluation. Professional competitors undergo rigorous safety training as part of qualification for TIMBERSPORTS events, including in handling and to ensure competency in high-hazard scenarios. Safety drills form a core component of preparation, emphasizing proper stance, equipment maintenance, and emergency procedures to build disciplined habits.

Venue and Spectator Safety

In Hot Saw competitions, venue setups prioritize spectator protection by maintaining a minimum safety distance of 9 meters from the middle of the athlete stands to the audience and timers across all disciplines, including sawing events. This separation helps mitigate risks from high-speed wood chips and potential equipment malfunctions. Log stations are positioned with specified inter-stand distances—such as 5 meters between sawing stands—to optimize direction and containment. Barriers, including mandatory shields placed in front and behind stations, are deployed to enclose the competition area and prevent from reaching viewing zones. Roped-off perimeters further designate safe spectator areas, ensuring only authorized personnel enter the active zone. Emergency protocols emphasize rapid response and preparedness, with on-site medical personnel, kits, and certified paramedics stationed throughout the venue. Clear evacuation paths are mapped and communicated via announcements, directing crowds away from hazard zones in case of incidents like equipment failure or fuel-related fires from methanol-powered saws. Event organizers maintain contact lists, including local police and hospitals, to facilitate immediate assistance. While specific noise thresholds for crowds are not universally mandated, ambient levels are monitored to stay below hazardous exposure limits, often recommending ear protection for prolonged viewing. Regulatory compliance aligns with ANSI standards for and event are also referenced in equipment inspections and venue design. Staff roles are critical to enforcement, with Global Sports Directors (GSDs) overseeing fairness and protocols, including pre-event certifications for alternative setups. Judges and spotters actively monitor for chain failures or other , clearing the stage with whistles before each run and positioning themselves to intervene if needed. Mandatory briefings for staff and volunteers highlight 9-meter zones around stands, emphasizing trajectories and signals to maintain a secure environment for all attendees.

Variations and Competitions

STIHL TIMBERSPORTS Series

The TIMBERSPORTS Series, established in 1985, features Hot Saw as one of its six core disciplines, alongside events like the single buck, stock saw, underhand chop, standing block chop, and springboard. This premier global circuit hosts annual U.S., European, and Individual World Championships, drawing over 100 professional athletes from more than 20 countries who compete for national and international titles. The series emphasizes precision and speed with standardized equipment and rules, positioning Hot Saw as the climactic event often reserved for the final round due to its high-stakes nature and technical demands. In the Hot Saw discipline, competitors must make three complete cuts on a 46 cm log to produce wooden discs within a marked 15 cm section, using a highly modified capable of revving up to 30,000 RPM. Qualification for championships occurs through a points-based system accumulated across regional and national events throughout the season, with top performers advancing to semi-finals and finals. In major championships, athletes typically perform single timed runs per heat, though finals may involve best-of-three formats in select cases to determine the winner based on the fastest aggregate time. The 2025 U.S. Championships highlighted the event's intensity when defending champion Nate Hodges set of 4.28 seconds during the men's pro semi-finals in Pool A, securing his advancement and underscoring ongoing advancements in technique and saw tuning. Notable events in recent years include the 2024 Individual World Championships held in , , marking the series' first time in the country and featuring intense Hot Saw finals with close margins and mechanical challenges that tested competitors' reliability under pressure. Prize purses for major championships, such as the U.S. event, total up to $275,000 distributed across disciplines and divisions, with individual winners in Hot Saw often receiving tens of thousands in cash and sponsorship opportunities. The series' standardized rules have fostered international rivalries, particularly between powerhouses like the and , where athletes exchange world records and titles annually, elevating Hot Saw's profile as a showcase of global lumberjack athleticism. To nurture future talent, STIHL TIMBERSPORTS introduced youth divisions through the Rookie World Championship in 2015, starting with events in , , that now include age-restricted competitions in five disciplines for athletes under 23, promoting skill development without the full pro-level Hot Saw intensity.

Regional and Alternative Formats

In regional lumberjack competitions across the , the two-man hot saw variant involves teams of competitors alternating cuts using a shared high-powered , emphasizing teamwork; these are popular at Midwest state fairs and festivals, where it serves as an accessible entry point for pairs of lumberjacks. The Lumberjack World Championships, held annually in , since the 1960s, feature a prominent hot saw event that blends professional and amateur participants in a mix of skill levels. Competitors make three cuts—down, up, and down again—on a white pine log in this discipline, with the current standing at 5.14 seconds, set by Matt Slingerland in 2024. In the 2025 event, Nate Hodges won with a time of 5.40 seconds. The event attracts over 100 competitors yearly across various divisions, fostering a community-oriented atmosphere distinct from purely professional circuits. Internationally, hot saw adaptations reflect local traditions and equipment preferences. In , woodchopping festivals incorporate traditional sawing events using manual crosscut saws on logs up to 60 cm in diameter, often , alongside STIHL TIMBERSPORTS hot saw on horizontal logs. European competitions, such as those in the , integrate disciplines like chopping with other events, though hot saw follows standardized STIHL rules without unique turbocharged allowances. These variants contrast with the standardized professional benchmarks like the STIHL TIMBERSPORTS series by allowing greater customization to cultural contexts. Hot saw events contribute to a robust scene, with over 200 regional competitions held yearly alone, often at fairs and festivals that lower entry barriers for novice and intermediate athletes. These gatherings act as qualifiers and talent pipelines for higher-level series, drawing thousands of participants and spectators to promote lumberjack sports nationwide.

References

  1. https://www.stihl-timbersports.com/en/sports/disciplines/hot-saw
  2. https://thesporting.blog/blog/what-are-timbersports
  3. https://finance.yahoo.com/news/stihl-timbersports-2025-u-championships-234800452.html
  4. https://www.instagram.com/reel/DP387R9DDHN/
  5. https://www.stihl-timbersports.com/en/sports/history
  6. https://www.nationalgeographic.com/culture/article/140721-lumberjack-united-states-sport-tools-foresters-television-logging
  7. https://data.stihl-timbersports.com/data/rules/241018_TIMB_rulesandregulations2024.pdf
  8. https://www.stihl.co.uk/en/support-and-contacts/experience-stihl-live/stihl-timbersports
  9. https://www.espn.com/gog01/s/2001/0327/1162883.html
  10. https://www.facebook.com/stihltimbersportsAUS/videos/learn-more-about-the-hot-saw-the-goal-is-to-quickly-cut-three-complete-cookies-f/1033806038401640/
  11. https://www.sportsdestinations.com/sports/lumber-sports/inside-events-stihl-timbersportsr-16714
  12. https://www.landmarktrading.com/blog/stihl-timbersports/
  13. https://www.stihlusa.com/stihl-timbersports/about-timbersports/
  14. https://www.facebook.com/stihltimbersportsUSA/videos/hot-saw-showdown/458909470323733/
  15. https://lumberjackworldchampionships.com/2025/07/20/lumberjack-world-championships-wraps-65th-annual-competition-with-new-world-record/
  16. https://www.stihl-timbersports.com/en
  17. https://www.stihl-timbersports.com/en/sports/history-of-logger-sports
  18. https://frostriver.com/blogs/news/history-of-lumberjack-competitions
  19. https://www.arboristsite.com/threads/stihl-timbersports.7039/
  20. https://www.leonschainsawpartsandrepair.com/uploads/3/9/7/9/39792537/october_1978_homelite_tournament_of_kings_championship_chainsaw_age.pdf
  21. https://www.stihlusa.com/WebContent/PressReleases/Releases/aug2005_20thanniversary_writtenhistory/aug2005_20thanniversary_writtenhistory_PressRelease.pdf
  22. https://www.youtube.com/watch?v=1kmml2GSi94
  23. https://data.stihl-timbersports.com/Event/1906
  24. https://lumberjackworldchampionships.com/wp-content/uploads/2022/07/LWC-History-FINAL.pdf
  25. https://www.youtube.com/watch?v=CKNgGZ4D4yE
  26. https://www.youtube.com/watch?v=zcY4-la16jM
  27. https://www.stihl-timbersports.com/en/events/2024/world-trophy-2024-2204
  28. https://www.stihl.com.au/en/service-events/experience-stihl-live/stihl-timbersports-2025
  29. https://www.stihl-timbersports.com/en/news/results-individual-world-championship-2025
  30. https://www.stihl-timbersports.com/en/news/result-team-world-championship-2025
  31. https://data.stihl-timbersports.com/Schedule
  32. https://data.stihl-timbersports.com/data/rules/250519_TIMB_rulesandregulations2025.pdf
  33. https://www.muscleandfitness.com/routine/outdoor/kickass-workout-nathan-waterfield-professional-lumberjack-and-timbersports-series-star/
  34. https://www.stihl-timbersports.com/en/news/the-way-from-rookie-to-pro
  35. https://toolsliving.com/power-tools/saw/how-to-build-a-hot-saw/
  36. https://www.stihl-timbersports.com/en/sports/competition-power-tools
  37. https://www.chicagotribune.com/2001/08/07/logging-in-to-forest-games/
  38. https://www.thedrive.com/news/homebuilt-hot-rod-chainsaws-prove-motorsports-goes-beyond-wheels
  39. https://bangshift.com/general-news/chainsaws-from-hell-cool-story-on-pro-lumberjack-hot-saws/
  40. https://www.themanual.com/culture/stihl-timbersports-competition/
  41. https://www.youtube.com/watch?v=7LKycRMt00U
  42. https://www.stihlusa.com/products/chain-saws/professional-saws/ms881/
  43. https://www.stihlusa.com/products/protective-and-work-wear/
  44. http://www.nwcg.gov/6mfs/felling-safety/chainsaw-safety
  45. https://www.fs.usda.gov/t-d/pubs/pdfpubs/pdf06672804/pdf06672804dpi72.pdf
  46. https://www.sylvanstimbersports.com/documents/conclave_handbook_2019.pdf
  47. https://jackpinelumberjackshows.com/importance-safety-lumberjack-shows/
  48. https://www.stihl-timbersports.com/en/
  49. https://www.osha.gov/lumber-building-material-dealer/standards
  50. https://www.stihl-timbersports.com/en/news/interview-joerg-blaesi
  51. https://data.stihl-timbersports.com/data/rulesandregulations.pdf
  52. https://www.prnewswire.com/news-releases/stihl-timbersports-2025-us-championships-delivers-world-records-title-defenses-and-rising-stars-302515319.html
  53. https://data.stihl-timbersports.com/Athlete/2668
  54. https://www.stihl-timbersports.com/en/news/announcement-world-championship-2024
  55. https://www.stihl-timbersports.com/en/news/announcement-us-championship-2025
  56. https://www.youtube.com/watch?v=aDomf_ag-ao
  57. https://www.stihl-timbersports.com/en/sports/competition-formats/rookie
  58. https://www.spokesman.com/stories/2006/aug/26/loggers-to-compete-at-valleyfest/
  59. https://lumberjacknjill.com/records-worldwide/records-hot-saw/
  60. https://www.apg-wi.com/sawyer_county_record/new-winners-crowned-at-lumberjack-world-championships/article_ec7fae3b-2041-4397-bb82-f290299c7ed2.html
  61. https://www.lumberjackworldchampionships.com/pdf/Current-World-Records-2018-7.pdf
  62. https://www.rasnsw.com.au/competitions/woodchopping-sawing/woodchopping-sawing-details/
  63. https://www.czechlumberjack.com/about-organization/
  64. https://www.sportsdestinations.com/sports/lumber-sports/lumberjack-sports-events-4545
Add your contribution
Related Hubs
User Avatar
No comments yet.