.jpg/250px-Leicaflex_SL_(2).jpg){kind=small}
.jpg)
Community hub
0 subscribers8 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to Leica R bayonet.
Nothing was collected or created yet.
Leica R bayonet
View on Wikipediafrom Wikipedia
.jpg) A Leicaflex SL and R mount 50 mm lens | |
| Type | Bayonet |
|---|---|
| Tabs | 3 |
| Flange | 47 mm |
| Connectors | Electrical contacts for lens properties on later models |
The Leica R bayonet mount is a camera lens mount system introduced by Leitz in 1964. The R mount is the standard method of connecting a lens to the Leica R series of 35 mm single-lens reflex cameras. The mount is descended from those used for the Leicaflex, Leicaflex SL and Leicaflex SL2 SLR cameras, but differs in the cams used to communicate lens aperture information to the camera. 3 cam lenses are compatible with all of the Leica SLR cameras, while R-only lenses have a slightly different mount shape that will not fit on the earlier cameras.[1][2]
The flange focal distance between mount and film is 47 mm.[3]
On 5 March 2009, Leica announced plans to cease production of its R-Series manual focus SLR and lenses.[4][5]
R Mount camera bodies
[edit]Leicaflex
[edit]| Image | Name | Year | Exposure | Notes |
|---|---|---|---|---|
.jpg) |
Leicaflex | 1964–1968 | Manual | • The first R mount SLR camera |
 |
Leicaflex SL | 1968–1974 | Manual Through-the-lens metering (TTL) |
• "SL" standing for selective light |
_Front_capped.jpg) |
Leicaflex SL2 | 1974–1976 | Manual TTL |
• More sensitive exposure meter and changes to the mirror hinging for wide angle lenses |
Leica R
[edit]| Image | Name | Year | Exposure | Notes |
|---|---|---|---|---|
 |
Leica R3 | 1976–1979 | Manual Aperture priority |
• Developed in cooperation with Minolta.
• Based on the Minolta XE. |
 |
Leica R4 | 1980–1986 | Manual Aperture priority semi automatic Shutter priority semi automatic Program automatic |
• Based on the Minolta Minolta XD-7. |
 |
Leica R5 | 1986–1991 | Manual Aperture priority semi automatic Shutter priority semi automatic Program automatic |
• Automatic TTL flash exposure measurement |
 |
Leica R6 | 1987–1996 | Manual |
• Mechanical shutter, relied on battery power only for the built-in light meter. |
 |
Leica R7 | 1991–1996 | Manual Aperture priority semi automatic Shutter priority semi automatic Program automatic |
• Complete flash automation. |
 |
Leica R8 | 1996–2002 | Manual Aperture priority semi automatic Shutter priority semi automatic Program fully automatic Flash pre exposure measurement |
• Intended as a clean break from the previous generation of Leica R cameras and designed in house. |
 |
Leica R9 | 2002–2009 | Manual Aperture priority semi automatic Shutter priority semi automatic Program fully automatic Flash pre exposure measurement |
• Electronic changes included the ability to tune the sensitivity of matrix metering. |
R mount lenses
[edit]- 1 cam
The original Leicaflex 1 cam lenses have a single sloped cam that communicates aperture setting to the camera. They can be used on later SL / SL2 and R-series cameras in stop-down metering mode only. Leica do not recommend that 1 cam lenses be used on R8 or R9 cameras because of possible damage to the cameras' ROM contacts. 1 cam lenses may be fitted with later 2 cams, 3 cams, or R cam + ROM contacts (replacing the sloped cams).[6]
- 2 cam
2 cam lenses have two sloped cams for the Leicaflex SL and SL2 with TTL metering and are fully compatible with the original Leicaflex. They can be used on R series cameras with the same limitation and warning as 1 cam lenses and may also be fitted with later cams.[6]
- 3 cam
3 cam lenses were introduced with R series cameras and have the earlier sloped cams and a third stepped "R-Cam" that communicates aperture information. They will work with all Leica SLR models since they have all three mechanical connections.[6]
- R only
These lenses only have the stepped R-cam and only work on R-series cameras. The mount is deliberately slightly incompatible with Leicaflex models and will not fit. They may be converted to ROM by a technician.[6]
- ROM
These only have the stepped R-cam plus electrical contacts communicating focal length to the camera. This is only supported on the R8/R9 although the lenses are fully compatible with all R-series cameras. The additional information is used in flash metering and communicated to the flash unit where it can be used to set power and flash zoom correctly and also to the optional Digital Module allowing lens focal length to be recorded with other image data.[6]
Earlier 1, 2, or 3 cam lenses may be upgraded to ROM but this entails removal of both sloped cams, meaning that the lens will no longer be compatible with Leicaflex series cameras.
- Table
| Leicaflex | SL/SL2 | R3-R7 | R8-R9 | |
|---|---|---|---|---|
| 1 Cam | ! | |||
| 2 Cam | ! | |||
| 3 Cam | ||||
| R Only | ||||
| ROM | + |
| + | full aperture metering + ROM data |
| full aperture metering | |
| stop-down metering | |
| ! | stop-down metering, possible damage to camera contacts |
| will not fit |
Use with other cameras
[edit]The flange focal distance of 47 mm is fairly large, meaning that few other systems' lenses can be adapted to fit on a Leica R and retain infinity focus, but R lenses can be converted to other systems. The distance is only 0.5 mm larger than the Nikon F-mount, which is not sufficient to make a workable adapter, however, at least one Nikon camera has been modified with a Leica R bayonet mount to take R lenses,[citation needed] and at least two manufacturers make replacement mounts, allowing many Leica R lenses to be used directly on various camera systems, such as Nikon F mount cameras. For this purpose, the cams need to be removed, which is not always possible (e.g. early Elmarit-R f/2.8 35mm). The mounting flange may then need to be machined to allow free movement of the remaining cam. Sometimes, it is wise to refit the inner black anti-reflection ring, to avoid reflections within the focus mechanism (e.g. Elmarit-R f/2.8 90mm or Elmarit-R f/2.8 135mm). A further point of consideration is whether the protrusion on the rear lens block will engage with the mirror of the target SLR. For some Nikon cameras, this may be an issue.
Chips can also be attached to provide focal length and maximum aperture recognition in the camera body, which provides Exif in digital cameras.
A number of manufacturers have produced adapters to allow Canon EOS cameras to take R lenses, these operate only in stop-down metering mode but function well when rapid operation is not required.
See also
[edit]
Wikimedia Commons has media related to Leica R.
Wikimedia Commons has media related to Leica R lenses.
References
[edit]- ^ "Leica R-System Mount". apotelyt.com. Retrieved 13 April 2019.
- ^ Chapman, Gerry Yemen, S. Venkataraman and Bill (4 April 2014). "Why Leica Camera decided to leave its beloved R series behind". The Washington Post. Retrieved 25 December 2019.
{{cite web}}: CS1 maint: multiple names: authors list (link) - ^ "Leica R-Mount - One / Two / Three-Cam / ROM". www.apotelyt.com. Retrieved 27 November 2019.
- ^ "Leica R10 - The R-system flagship that did not materialize". www.apotelyt.com. Retrieved 27 November 2019.
- ^ "End of the Line for the Leica R System?". The Online Photographer. Retrieved 27 November 2019.
- ^ a b c d e "Leica R Lenses: Understanding Cams - Spotlight". www.keh.com. Archived from the original on 18 February 2022. Retrieved 27 November 2019.
External links
[edit]
Leica R bayonet
View on Grokipediafrom Grokipedia
Overview and history
Introduction and development
The Leica R bayonet mount was introduced by Ernst Leitz GmbH in 1964 as part of the company's entry into the single-lens reflex (SLR) camera market, driven by the surging popularity of SLRs among photographers and Leica's need to diversify beyond its longstanding dominance in rangefinder cameras.[6] By the early 1960s, competitors like Nikon with its F-series had accelerated the industry's shift toward SLRs, which offered through-the-lens viewing and greater versatility for interchangeable lenses, prompting Leitz to develop a system that could compete while upholding the brand's precision engineering standards.[7] The R bayonet marked a pivotal evolution for Leica, transitioning from the slower screw-mount (M39) systems used in earlier rangefinders to a more efficient mounting mechanism tailored for SLR demands.[2] Development of the R bayonet began in the late 1950s alongside the Leicaflex prototype, the first SLR body designed by Leitz, with the mount specifically engineered to facilitate rapid lens changes and exact alignment for optimal optical performance.[6] This bayonet system addressed key limitations of the screw mount, such as time-consuming threading and potential misalignment, by employing a three-lug design that locked lenses securely and precisely, thereby enhancing workflow speed without compromising Leica's renowned optical heritage rooted in decades of lens innovation.[7] The mount's flange focal distance of 47 mm was chosen to accommodate the SLR's longer back focus requirements while preserving compatibility with high-quality glass elements.[1] The R bayonet and Leicaflex made their public debut at the 1964 Photokina trade fair in Cologne, Germany, where they were presented as Leica's bold step into the SLR era, attracting attention for their craftsmanship amid a sea of more affordable Japanese alternatives.[6] This unveiling underscored Leitz's commitment to quality over mass production, positioning the R system as a premium option for professionals seeking uncompromising image quality in an SLR format.[8]Production timeline
The Leica R bayonet system was introduced in 1964 alongside the Leicaflex, marking Leica's entry into the 35mm single-lens reflex (SLR) camera market.[6] This initial model featured a mechanical shutter and laid the foundation for the R-mount's evolution, with production of the standard Leicaflex running until 1968.[7] In 1968, Leica expanded the lineup with the Leicaflex SL, incorporating through-the-lens (TTL) metering for improved exposure accuracy, followed by the Leicaflex SL2 in 1974, which added a brighter viewfinder and LED indicators.[6] These SL models represented the shift toward more user-friendly features while maintaining the mechanical core of the system, with production of the Leicaflex series concluding in 1976.[9] The 1970s brought electronic advancements, exemplified by the 1976 launch of the Leica R3, the first R-series body with an electronic shutter and aperture-priority automation, developed in collaboration with Minolta.[10] This partnership extended into the 1980s, yielding models like the R4 (1980), R5 (1987), and R7 (1992), which integrated progressive features such as multi-mode metering and motorized film advance, though Leica gradually reduced reliance on external design input.[11] By the 1990s, Leica returned to fully in-house development with the R8 in 1996, a modular metal-bodied SLR emphasizing ergonomic refinements and compatibility with the emerging ROM (Read-Only Memory) lenses.[12] The R9 followed in 2002, introducing tunable matrix metering for enhanced exposure precision across its integrated, selective, and multi-pattern modes.[13] Production of the R system ended with the announcement on March 5, 2009, when Leica halted manufacturing of the R9 body and new R lenses due to the declining demand for film SLRs, escalating production costs, and a strategic pivot toward digital rangefinders like the M series.[14][15] Post-discontinuation, Leica maintained service support and lens availability into the 2010s, allowing existing R equipment to remain viable for photographers.[14] Over its 45-year run, the system produced approximately 488,000 camera bodies.[16]Technical specifications
Mount design
The Leica R bayonet is a three-tab bayonet mount with an inner diameter of 49 mm and a flange focal distance of 47 mm, the latter allowing for a longer back focus than some contemporary mounts such as the Canon FD at 42 mm.[17][2][2] This design accommodates the swinging mirror mechanism in SLR cameras while maintaining sufficient clearance for lens elements close to the focal plane. Introduced in 1964 with the Leicaflex series, the mount's geometry ensures optical precision and mechanical stability essential for professional photography. The mount underwent a subtle redesign in 1996 for ROM lenses, altering the bayonet shape to prevent attachment to pre-R3 bodies.[18] Mounting a lens requires aligning the three tabs with corresponding slots on the camera body, followed by a clockwise rotation to engage the locking mechanism, which provides a secure fit to prevent accidental disengagement during use.[19] The mechanism's tolerances, often machined to within 0.01 mm, contribute to reliable operation without excessive play.[20] Constructed typically from chrome-plated brass, the mount offers durability, corrosion resistance, and precise alignment between lens and camera, minimizing shifts that could affect image quality.[21] This material choice reflects Leica's emphasis on high-quality engineering for long-term reliability. In contrast to the company's earlier M39 screw mount used in rangefinder cameras, the R bayonet allows for quicker lens exchanges without prolonged threading, streamlining workflow in SLR systems.[2]Compatibility features
The Leica R bayonet system's compatibility relies on a series of mechanical cams that facilitate aperture control and metering communication between lenses and camera bodies. Early lenses featured a single cam, introduced in 1964 for the Leicaflex series, which supported only stop-down metering on compatible bodies by mechanically linking the aperture mechanism to the camera's meter.[18] This evolved to a two-cam design in 1968 for the SL and SL2 models, adding a second cam to enable through-the-lens (TTL) metering at full aperture while maintaining backward compatibility in stop-down mode on earlier bodies.[2] By 1976, the three-cam configuration became standard, incorporating two chrome cams for aperture transmission and a black stepped third cam for precise linkage, ensuring full open-aperture TTL metering across all subsequent R-series bodies without requiring stop-down operation.[18] These cams position the lens's internal levers to relay aperture settings mechanically, preventing mismatches that could hinder exposure accuracy.[2] Electrical compatibility was introduced with ROM (Read-Only Memory) lenses starting in 1996, featuring a strip of 8 electrical contacts integrated into the mount to transmit digital data from the lens to the camera.[2] These contacts convey lens-specific information, such as focal length, maximum aperture, and compensation data for vignetting and distortion, enabling advanced exposure automation on R8 and R9 bodies.[22] This data exchange supports program and aperture-priority modes, as well as EXIF-like recording for post-processing, while ROM lenses retain mechanical three-cam functionality for use on earlier R-series bodies in manual or semi-automatic modes.[23] Metering modes in the R system vary by lens cam configuration and body capabilities, with one- and two-cam lenses limited to stop-down metering on most bodies, where the photographer manually stops down the aperture to activate the camera's meter.[18] Three-cam and ROM lenses enable full-aperture TTL metering on later bodies, allowing continuous metering without manual intervention for more efficient shooting.[2] Flash synchronization is handled via the camera's hot shoe, with the bayonet's mechanical design supporting consistent triggering across compatible lenses.[23] Leica provided factory upgrade services to enhance lens compatibility, such as converting one- or two-cam lenses to three-cam by adding the necessary mechanical levers, thereby enabling full TTL operation on all R-series bodies.[3] ROM contacts could also be retrofitted to select three-cam lenses for electrical data transmission on R8 and R9 models, though this was less common and typically reserved for newer productions.[2] These modifications ensured broader usability within the evolving R system, often performed at authorized service centers to maintain optical integrity.[3]Camera bodies
Leicaflex series
The Leicaflex series marked Leica's entry into the single-lens reflex (SLR) camera market, introducing the R bayonet mount as the foundation for a new system of interchangeable lenses and bodies. The inaugural model, the Leicaflex Standard, was produced from 1964 to 1968 and featured a fully mechanical cloth focal-plane shutter with speeds ranging from 1 second to 1/2000 second plus bulb mode, emphasizing manual focus and exposure control without any automation. Weighing approximately 833 grams for the body alone, it incorporated a robust all-metal construction with a lever wind for film advance and a coupled CdS cell meter integrated into the pentaprism viewfinder, though this required stop-down metering for accurate readings and was limited to compatibility with early 1-cam R-mount lenses. Its design prioritized precision engineering, including a dampened mirror to minimize vibration, establishing the series' reputation for durability despite the absence of through-the-lens (TTL) metering. The Leicaflex SL, manufactured from 1968 to 1974, built upon the Standard by introducing TTL metering via a dual CdS sensor positioned at the bottom of the camera body, enabling selective center-weighted exposure readings at full aperture for greater convenience with a wider range of R-mount lenses. This model retained the mechanical shutter up to 1/2000 second and manual operation, with a match-needle indicator in the viewfinder for intuitive exposure adjustments, while its body weight hovered around 770 grams, supported by premium brass and alloy components for exceptional build quality. Innovations included a brighter microprism focusing screen and continuous shutter speeds without gaps in intermediate ranges, enhancing usability for professional photographers transitioning from Leica's rangefinder systems. The Leicaflex SL2, produced briefly from 1974 to 1976, refined the series' metering system for improved accuracy and sensitivity, particularly in low light, while adding viewfinder illumination via a dedicated button to enhance readability of the match-needle display showing both shutter speed and aperture. Like its predecessors, it employed a fully mechanical focal-plane shutter up to 1/2000 second and manual focus/exposure, with a weight of about 770 grams and lever-driven film advance, underscoring the modular, titanium-free design focused on reliability over speed. However, it lacked aperture-priority automation, relying solely on manual settings, and maintained compatibility primarily with 1-cam and early multi-cam lenses, requiring stop-down techniques on the original model for optimal metering performance. This final Leicaflex iteration solidified the R bayonet's mechanical foundation before the transition to more electronic Leica R bodies.Leica R series
The Leica R series marked a significant advancement in Leica's SLR lineup, introducing electronic controls and automated exposure modes to the R bayonet system beginning in the mid-1970s. These cameras built on the mechanical foundations of earlier models by incorporating battery-dependent electronic shutters and through-the-lens (TTL) metering, enhancing usability for professional photographers while maintaining Leica's emphasis on optical precision and build quality. Developed in collaboration with Minolta to achieve cost efficiency and technological integration, the series from the R3 to the R7 leveraged Minolta's expertise in electronic SLRs, such as the XD series, allowing Leica to produce reliable, compact bodies without compromising on durability. This partnership enabled features like variable exposure automation, which were innovative for Leica at the time, though the cameras remained manual-focus only, prioritizing image quality over speed. The Leica R3, produced from 1976 to 1979, was the first in the series and based on the Minolta XE design, featuring an electronic shutter with speeds from 4 seconds to 1/1000 second and aperture-priority autoexposure as its primary automated mode, alongside manual operation. Weighing approximately 780 grams, it introduced selective TTL metering (7mm spot or center-weighted) and compatibility with motorized winders, setting a benchmark for electronic integration in Leica SLRs. Successors like the R4 (1980-1986, around 630 grams) expanded to multi-mode operation, including program, shutter-priority, and aperture-priority autoexposure, with shutter speeds up to 1/1000 second and options for selective, center-weighted, or early matrix metering patterns. The R5 (1986-1991), approximately 625 grams, further refined automation with program mode and introduced dedicated TTL flash metering via a silicon photodiode, supporting sync speeds up to 1/1000 second for enhanced low-light performance. These models supported 3-cam R lenses for full electronic communication, ensuring accurate exposure data transfer. The R6 (1987-1996, approximately 625 grams) diverged by returning to a manual, mechanical shutter design (1 to 1/1000 second, battery-independent except for metering), appealing to purists seeking reliability in extreme conditions, while the R6.2 variant (1992-1997) extended top speeds to 1/2000 second. The R7 (1991-1996) bridged electronic and mechanical elements with a taller body housing four LR44 batteries, offering program and priority modes alongside fully automated TTL flash control in program mode, where the camera balanced ambient and flash exposure seamlessly. Later iterations culminated in the in-house designed R8 (1996-2002, around 890 grams) and R9 (2002-2009, 790 grams), Leica's proprietary return to full control over SLR development, featuring electronic shutters up to 1/8000 second, motorized film advance, data imprinting on negatives, and an LCD viewfinder display for shutter speeds and exposure info. The R8 and R9 advanced metering to multi-pattern systems, including 6-segment matrix for the R8 and tunable matrix sensitivity (in 0.1 EV steps) for the R9, alongside spot and center-weighted options, with TTL flash support for dedicated units like the SF 24D. These heavier bodies (600-1000 grams across the series) emphasized ergonomics, such as improved grips and parallax-corrected viewfinders covering 93-95% of the frame. Despite their innovations, the R series lacked autofocus, relying on manual focusing aids like split-image rangefinders, which suited Leica's precision ethos but limited appeal in fast-action scenarios. The line concluded with the R9 as the final film-based model, supplanted by the digital shift exemplified by the 2005 Digital Modul-R back for R8/R9 bodies, signaling Leica's pivot toward mirrorless and digital systems.Lenses
Native R-mount lenses
The Leica R-mount lens lineup, primarily produced by Leica (with some collaborations such as Schneider-Kreuznach), evolved alongside the R-system cameras from the 1960s through the early 2000s, featuring manual-focus optics designed for optimal integration with the bayonet mount's mechanical and electronic interfaces.[1] Early generations relied on cam-based mechanical linkages for aperture indexing and metering, with the first series (1-cam lenses) introduced in 1964 for the original Leicaflex cameras, followed by 2-cam (1968) and 3-cam (1976) variants that improved compatibility across film bodies by adding coupling rings for light metering at full aperture.[5][2] These mechanical designs persisted into the 1980s, emphasizing robust brass construction and precise helicoid focusing mechanisms. From 1976 onward, with the shift to electronic shutter bodies like the Leica R3, Leica introduced R-only lenses lacking the earlier cam systems, simplifying production while relying on electronic contacts for exposure data in later models. The ROM (Read-Only Memory) generation, launched in the 1990s, incorporated data chips in the mount flange to transmit lens information—such as focal length and maximum aperture—to R8 and R9 cameras, enabling advanced metering and EXIF-like recording without mechanical linkages. This evolution allowed for more compact designs while maintaining the mount's 47 mm flange focal distance and 49 mm throat diameter, ensuring seamless bayonet attachment.[1][24] The cam systems from earlier lenses briefly enabled full-aperture metering on compatible bodies, as detailed in the mount's compatibility features. Leica's native R lenses spanned a wide focal length range, from ultra-wide primes like the 15mm f/3.5 fisheye to super-telephotos such as the 800mm f/5.6 Telye-T, with zooms including the compact 35-70mm f/3.5 Vario-Elmar-R. Aperture capabilities reached as fast as f/1.0 in specialized optics, exemplified by the 50mm f/1.0 Noctilux-R, which prioritized low-light performance through its aspherical front element for minimized aberrations. Later designs incorporated advanced glass elements, such as the apochromatic Summicron-R 50mm f/2, featuring anomalous partial dispersion glass to achieve diffraction-limited resolution across the frame. All lenses maintained manual focus via smooth, damped rings, with metal barrel construction—often in black anodized aluminum or chrome—for durability, and standard filter threads of 49mm, 60mm, or 72mm depending on focal length. By 2009, Leica had produced over 50 distinct native R-mount lenses, including more than 30 primes and a dozen zooms, reflecting a commitment to high-end optics for professional applications in portraiture, landscape, and macro photography. Many earlier mechanical lenses could be retrofitted with ROM contacts through official service upgrades, extending their utility to digital-era R bodies and preserving the system's longevity.Third-party and adapted lenses
Several third-party manufacturers produced lenses compatible with the Leica R bayonet during the 1970s through the 1990s, though options remained limited owing to the mount's proprietary design and Leica's dominant position in the market. French optics firm Angénieux offered a range of high-end zoom lenses tailored for the R system, including the 70-210mm f/3.5 macro 3-cam model, renowned for its optical quality and macro capabilities suitable for professional applications.[25] Similarly, Sigma developed a small selection of affordable zooms, such as the 28-85mm f/3.5-4.5 II macro with 3-cam coupling, providing versatile focal lengths for general photography.[26] Tamron extended compatibility through its Adaptall-2 system, where lenses like the SP 35-70mm f/2.8-4 could be mounted via a dedicated R adapter, allowing users access to a broader array of third-party optics without native R production.[27] Adaptations of non-R lenses to the bayonet were facilitated by specialized converters and aftermarket services, particularly for Leica's earlier M-mount and screw-mount (L39) optics. Leica produced an official M-to-R adapter (part 14167), which enables mounting of M lenses on R bodies for close-up and macro work, though the 19.2mm flange distance difference prevents infinity focus, limiting its use to distances starting around 70cm. For screw-mount lenses, custom bayonet conversions were available through repair specialists like DAG Camera, which offered tailored modifications to fit vintage L39 optics onto R cameras while preserving optical alignment for practical focusing ranges. These adaptations expanded the usability of Leica's rangefinder-era glass on SLR bodies but required precise craftsmanship to maintain image quality. Most third-party R lenses incorporated the 3-cam coupling mechanism for compatibility with post-1976 R-series cameras, ensuring accurate aperture control and metering, while ROM equivalents were uncommon due to the era's technology. Zoom lenses from these makers were fewer in number compared to Leica's native offerings, focusing instead on primes and standard zooms to complement the system's high-end reputation. Production of such lenses dwindled by the early 2000s as the R system aged, rendering many examples rare and collectible today, with no major third-party developments following Leica's 2009 discontinuation of R production.[4]Legacy and adaptations
Use with other camera systems
The Leica R bayonet lenses have been adapted for use on non-Leica film camera systems, primarily through custom modifications that replace or alter the lens mount to fit alternative bayonets. Adaptations for Nikon F-mount bodies involve custom mount conversions that remove the rear mechanical cams responsible for aperture coupling, allowing stop-down metering on the host camera while preserving manual focus and exposure control.[28] The Leica R mount's 47 mm flange focal distance poses significant limitations for cross-compatibility with systems featuring shorter distances, such as the Canon FD mount at 42 mm, where simple mechanical adapters cannot achieve infinity focus without incorporating corrective optical elements to compensate for the 5 mm difference.[17] Additionally, the electrical ROM contacts introduced on later R lenses from the 1990s onward remain non-functional on non-Leica R bodies, as these contacts facilitate data communication exclusively with Leica's R8 and R9 cameras for advanced metering and exposure automation.[2] Historical examples of such adaptations highlight the collaborative legacy between Leica and Minolta; the Leica R3, introduced in 1976, shared manufacturing tooling with the Minolta XE series, and the collaboration extended to the R4–R7 series, all based on Minolta designs, though lenses remained incompatible due to differing mounts (R vs. MD). Custom mount conversions, such as those offered by services like Leitax, allow R lenses to be used on Pentax K-mount bodies by bridging the approximately 1.5 mm flange gap (Leica R 47 mm vs. Pentax K 45.46 mm) for manual operation on Pentax film SLRs.[11][29] Key challenges in these film-era cross-uses include the consistent loss of TTL metering, as the R bayonet's mechanical and electrical linkages do not interface with foreign systems, compelling photographers to rely on manual exposure determination via external meters or stop-down preview.[30]Modern digital compatibility
The Leica R bayonet continues to find utility in digital photography primarily through adapters that bridge its 47 mm flange focal distance to shorter-flange mirrorless systems, enabling the use of its renowned lenses on contemporary cameras. Official Leica adapters, such as the R-Adapter L, allow seamless mounting of up to 43 R-series lenses on L-mount mirrorless bodies like the SL (Typ 601) and subsequent models, including the SL3, while maintaining infinity focus and electronic communication for ROM-equipped lenses to record aperture and focal length data in EXIF metadata.[31] Third-party optical adapters from manufacturers like Novoflex provide compatibility with diverse mounts, including Sony E-mount for A7-series cameras and Canon RF for EOS R bodies, often incorporating manual aperture control and, in some cases, focus confirmation chips to simulate electronic aids on digital viewfinders.[32][33] These adaptations have popularized R lenses in digital workflows, particularly for video cinematography on Sony A7-series cameras, where their vintage optics deliver distinctive bokeh and color rendition in manual focus setups suitable for 4K and 8K production.[34] Firmware enhancements in Leica's L-mount systems during the 2010s and 2020s, including updates to the SL series, have improved lens profile recognition and distortion corrections for adapted R optics directly in-camera, enhancing post-production efficiency without third-party software.[35] Experimental third-party enhancements, such as focus confirmation chips in adapters from Fotodiox, offer manual focusing aids on compatible DSLR viewfinders, though full electronic autofocus remains unavailable due to the mount's analog heritage.[33] High-resolution digital backs represent a niche but significant adaptation for R bodies; Leica's Digital-Modul-R (DMR), released in 2003 and compatible with R8 and R9 cameras, integrates a 10-megapixel full-frame sensor to digitize the system, though production ceased after approximately 2,200 units.[36] As of 2025, no new R bayonet camera bodies are in production, yet the secondary market for R lenses thrives, driven by their optical excellence for hybrid photo-video applications on modern mirrorless platforms like the Leica SL3, supported by Leica's ongoing adapter ecosystem.[37]References
- https://camera-wiki.org/wiki/Leicaflex_/_Leica_R_lenses
- https://camera-wiki.org/wiki/Leicaflex