Hubbry Logo
M12 Gun Motor CarriageM12 Gun Motor CarriageMain
Open search
M12 Gun Motor Carriage
Community hub
M12 Gun Motor Carriage
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
M12 Gun Motor Carriage
M12 Gun Motor Carriage
M12 Gun Motor Carriage
View on Wikipedia
from Wikipedia

The 155 mm gun motor carriage M12 was a U.S. self-propelled gun developed during World War II. It mounted a 155 mm gun derived from the French Canon de 155 mm GPF field gun.

Key Information

Development

[edit]

The idea for the M12 was first proposed in 1941 and the pilot - T6 GMC - built and tested in early 1942. The Army Ground Forces initially rejected the design as unnecessary, but after the Artillery Board supported the Ordnance Department in asking for 50 units, 100 were authorized and built by March 1943. These vehicles were at first used for training.[1]

Description

[edit]

The M12 was built on the chassis of the M3 Grant tank. The engine was moved forward to the center of the vehicle to allow room for the gun mount, and most vehicles used later M4-style bogies with trailing return rollers.[1] The armored compartment at the front was occupied by the driver and commander. The gun crew were located in an open-topped area at the back of the vehicle. It mounted a 155 mm gun M1917, M1918 or M1918M1, depending upon availability, a weapon derived from the nearly identical French 155 mm GPF gun of World War I vintage. The main armament had a traverse of 14° and elevation limits of +30° to -5°.[2] Limited storage space meant that only 10 155 mm projectiles and propellant charges could be carried on the vehicle.

An earth spade (similar to a bulldozer blade) at the rear was employed to absorb recoil. This layout (large gun mounted in an open mount at the rear, with a spade) was the pattern adopted for many years by other pieces of heavy self-propelled artillery.

Production

[edit]

Only 100 vehicles were built: 60 in 1942 and a further 40 in 1943.

Production of M12[3]
Month M12
September 1942 1
October 1942 37
November 1942 12
December 1942 10
January 1943 16
February 1943 19
March 1943 5
Total 100

M30 cargo carrier

[edit]
T14/M30 cargo carrier

Given the limited ammunition carried in the M12, a support vehicle based on the same chassis was produced as the cargo carrier M30 to transport the rest of the gun crew, battery stores, and ammunition. Identical to the M12 except for the gun and recoil spade, it could carry 40 rounds of 155 mm ammunition, and was armed with a .50-caliber (12.7 mm) M2 Browning machine gun[1] in a ring mount for self-defense. In operational conditions, the M12 and M30 would serve in pairs.[1]

Use

[edit]

During 1943, the vehicles were used for training or put into storage. From February to May 1944, before the invasion of France, 74 M12s were overhauled in preparation for combat operations overseas.[1] They were assigned to seven armored field artillery battalions (the 174th[4], 258th, 557th, 558th, 987th, 989th, and 991st) and employed successfully throughout the campaign in North-West Europe.

Although designed primarily for indirect fire, during assaults on heavy fortifications, the M12s were sometimes employed in a direct-fire role, such as in the Allied assault on the Siegfried Line, where the M12 earned its nickname "Doorknocker" thanks to the 155mm cannon's ability to fire armour piercing rounds through seven feet of concrete at ranges up to 2,000 yards (1,830 meters).[5][dubious – discuss] The vehicle was also dubbed "King Kong" by American operators due to the raw power of its gun.[citation needed]

In 1945, the M12 was complemented in Europe by the M40 gun motor carriage, designed on a late-war M4A3 Sherman chassis with the 155 mm gun M1 the successor to the 155mm M1918. Postwar, the M12 was retired from service and replaced by the M40.

Surviving vehicle

[edit]
"Adolph's Assassin" on display at the U.S. Army Artillery Museum, Fort Sill, Oklahoma

The sole surviving M12 GMC is displayed at the Fort Sill museum in Oklahoma.[6] It had previously been stored at the United States Army Ordnance Museum in Aberdeen, Maryland, United States, before being transferred to Fort Sill in November 2010.

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

M12 Gun Motor Carriage

View on Grokipedia
from Grokipedia
The M12 Gun Motor Carriage was a United States self-propelled gun developed during World War II, consisting of a 155 mm M1917, M1918, or M1918M1 gun mounted in an open-top casemate at the rear of a modified M3 Lee/Grant medium tank chassis, with a spade stabilizer for firing and minimal armor protection. Designed to deliver long-range, heavy artillery fire in support of advancing infantry and armor while maintaining mobility, it carried only 10 rounds of ammunition onboard and relied on a paired M30 cargo carrier for additional resupply, typically carrying 40 more shells. Development of the M12 began in as part of U.S. efforts to create mobile platforms capable of keeping pace with mechanized forces, with the accepted for production in September after modifications to the M3 chassis, including relocating the engine forward and removing the turret. The was manufactured by the Pressed Steel Car Company, with a total of 100 units produced between and 1943, though only 74 were refurbished in early 1944 by to address issues like engine and exhaust problems before combat deployment. Key specifications included a combat weight of approximately 26 to 27 tons, a crew of six (, , and four gunners/loaders), and from a Continental R975 C1 radial engine producing 350 horsepower, enabling a maximum road speed of 38 km/h (24 mph) and an operational range of about 220 km. The primary armament, a 155 mm gun (variants including M1917, M1918, or M1918M1), fired 43 kg (95 lb) high-explosive shells at a of 735 m/s (2,411 ft/s), achieving a maximum range of 18,370 m (20,000 yards), with a traverse of 28 degrees total and elevation from -5 to +30 degrees; a secondary .50 (12.7 mm) machine gun was mounted for anti-aircraft or close defense. Armor thickness varied from 51 mm (2 inches) on the front to 13 mm (0.5 inches) on the sides and top, offering limited protection primarily against shrapnel. The M12 entered combat in late summer 1944 following the , serving with U.S. Army battalions such as the 557th, 558th, 987th, and 991st, where it provided devastating support during operations in France, the , and the siege of Brest. Effective at ranges of 2,000 to 4,000 yards for bunker-busting—capable of penetrating up to 1.8 m (6 ft) of with 3 to 5 direct hits—it had a firing rate of 2 to 4 rounds per minute but was vulnerable due to its open design and required precise positioning on stable ground using the rear spade. Despite its limited production and late introduction, the M12 proved valuable in the final push into until the war's end in , with one surviving example preserved at the U.S. Army Field Artillery Museum at , .

Development

Origins and Requirements

During , the U.S. Army recognized a critical need for mobile heavy to support fast-moving armored and mechanized operations, especially as observed in early campaigns where towed guns proved vulnerable due to their slow repositioning and exposure to enemy . These limitations, observed against Axis forces, prompted a shift toward self-propelled systems that could keep pace with advancing and tanks while providing rapid, long-range support. The design of such systems drew heavily from the French Canon de 155 mm Grande Puissance Filloux (GPF) gun, a reliable I-era weapon supplied to in 1918 and subsequently produced domestically as the M1917. The U.S. modified this into the M1918 and M1918M1 variants to enhance accuracy and range, retaining its proven split-trail carriage and hydro-pneumatic recoil system for adaptation to self-propelled mounts. Early interwar experiments, including the 1919 Gun Motor Carriage Mk. II on a chassis, demonstrated the feasibility of mounting the GPF-derived gun on mobile platforms, though development stalled in 1922 due to mechanical reliability issues. In response to wartime urgencies, the U.S. Ordnance Department initiated studies in 1940-1941 to convert existing tank hulls—particularly the M3 medium tank chassis—for roles, aiming to leverage surplus production without disrupting tank output. By June 1941, specific requirements outlined a self-propelled carriage for the 155 mm gun capable of support at ranges up to approximately 20,100 yards (18,370 meters), with compatibility to standard truck-towed ammunition and prime movers for logistical efficiency. These specifications addressed the tactical demands for a heavy gun that could deliver 95-pound high-explosive projectiles over extended distances while maintaining battlefield mobility.

Prototyping and Adoption

The development of the T6 pilot vehicle began in June 1941 when the U.S. Ordnance Department ordered a prototype Gun Motor Carriage T6 to be constructed at Rock Island Arsenal, utilizing the chassis of an M3 medium tank and mounting a 155 mm M1918M1 gun in an open-top superstructure. The prototype was completed in February 1942, featuring key modifications to address weight distribution and operational challenges, including relocating the gun to the rear of the vehicle for better balance and repositioning the engine to the center of the hull. An open casemate design was adopted for the fighting compartment to accommodate the significant recoil of the 155 mm gun, with the crew required to deploy a hydraulic trail mechanism—later simplified to a hand-cranked winch for reliability—prior to firing. Following completion, the T6 was shipped to for extensive trials in February 1942, where it underwent evaluations of mobility, stability, and firing performance. The tests demonstrated superior cross-country mobility and rapid deployment compared to towed equivalents, with the vehicle achieving effective firing at ranges up to 18,400 meters using high-explosive ammunition. Initial issues with the hydraulic trail system were identified during live-fire exercises, but these were resolved through modifications, allowing the to achieve an of up to +30 degrees and a total traverse of 28 degrees (14 degrees left or right). Overall, the trials confirmed the T6's viability as a self-propelled heavy platform, with positive feedback on its maneuverability and crew ergonomics despite the open-top exposure. The successful outcomes of the Aberdeen trials led to the vehicle's recommendation for production in July 1942, culminating in its official standardization as the 155 mm Gun Motor Carriage M12 later that month. This adoption included an initial order for 50 units, soon increased to 100, with manufacturing contracts awarded to the Pressed Steel Car Company of , , and production commencing in November 1942 to meet requirements for mobile heavy artillery support.

Design and Specifications

Chassis and Propulsion

The M12 Gun Motor Carriage was built on a modified chassis derived from the M3 Lee/Grant medium tank, which provided a robust base for mounting the heavy 155 mm gun while maintaining tracked mobility. This chassis measured 22 feet 1 inch in length, 8 feet 9 inches in width, and offered a ground clearance of 17 inches, allowing reasonable navigation over rough terrain typical of combat zones. Propulsion was provided by a Continental R975 C1 nine-cylinder radial , delivering 350 horsepower (net) at 2,400 RPM. The featured a capacity of 200 gallons, enabling an operational range of approximately 140 miles on . A synchromesh transmission with five forward speeds and one reverse facilitated controlled power delivery to the tracks. The suspension system employed (VVSS), consisting of three bogies per side with two wheels each, for a total of six wheels per track. Tracks measured 16.56 inches in width, resulting in a ground pressure of 12.1 psi that balanced for the 59,000-pound . This setup supported a top speed of 24 mph and an off- speed of about 15 mph, with a fording depth of 3 feet.

Armament and Fire Control

The primary armament of the M12 Gun Motor Carriage was the 155 mm M1918M1 gun, a U.S. adaptation of the French field gun from , mounted in an open-topped, fixed at the rear of the vehicle without a rotating turret. This weapon fired the 95-pound M101 high-explosive at a of approximately 2,411 feet per second, achieving a maximum range of around 20,000 yards under optimal conditions. The gun's performance emphasized long-range support, with a maximum firing rate of 2 to 4 rounds per minute and a sustained rate of 1 round per minute due to the manual loading process. Ammunition storage was constrained by the vehicle's design, carrying only 10 rounds of 155 mm projectiles and corresponding propelling charges in racks within the fighting compartment, necessitating reliance on accompanying M30 cargo carriers for resupply during extended operations. Authorized projectiles included the M101 series for high-explosive effects, with loading facilitated by a horizontal sliding breech mechanism and percussion primers. Secondary armament consisted of a single .50 caliber heavy mounted on the roof for anti-aircraft defense and close-range crew protection against infantry threats. The was manually operated, providing against low-flying from the open compartment. Fire control relied on manual mechanisms for both elevation and traverse, with the gun capable of 28 degrees total traverse (14 degrees left or right) and elevation from -5 to +30 degrees, all adjusted via hand cranks by the crew to align the weapon for indirect or direct fire roles. Sighting equipment included the panoramic telescope M6 for indirect fire observation, allowing the gunner to align on distant targets using azimuth and elevation scales, complemented by the M53 telescope for direct aiming. This setup, combined with a gunner's quadrant for angle verification, enabled effective artillery spotting without powered assistance, though it demanded coordinated crew effort in the exposed fighting compartment.

Armor, Crew, and Mobility

The M12 Gun Motor Carriage utilized thin armor protection made from rolled and homogeneous , with plating thicknesses ranging from 0.5 inches on the top and floor to 2 inches on the lower front hull, providing limited defense against small arms fire and shell fragments but offering little resistance to heavier caliber impacts. The featured sloped upper front armor at 30 degrees for improved ballistic protection, while the sides and rear consisted of 0.625 to 0.75-inch vertical plates, and the open-top superstructure enhanced ventilation during prolonged firing but exposed occupants to shrapnel, bursts, and low-flying aircraft. This design contributed to a total combat weight of approximately 59,000 pounds, balancing mobility with the heavy 155 mm gun mount. The vehicle's crew comprised 6 members, including a , driver, gunner, assistant gunner, and two loaders or ammunition handlers, all positioned within the open superstructure at the rear to manage the main armament and onboard projectiles. The driver and occupied a forward armored compartment for better protection during transit, while the gun 's exposed positions demanded heightened vigilance against enemy observation and . In practice, operations often paired the M12 with an M30 cargo carrier to accommodate additional personnel and , mitigating some logistical strains on the primary . Mobility was provided by the modified M3 chassis, enabling a sustained road speed of 21 mph and a maximum grade climb of 60 percent (approximately 30 degrees), suitable for repositioning in varied terrain during support roles. The vehicle demonstrated a minimum turning diameter of 62 feet (31-foot radius) and could clear vertical obstacles up to 2 feet high, with a ground clearance of 17 inches aiding cross-country performance despite the rear-heavy configuration. The M30 variant enhanced operational flexibility by offering towing capacity for light loads and serving as a dedicated ammunition transport, allowing the M12 to maintain sustained fire without frequent resupply halts. Due to the fixed rearward orientation of the main gun, the M12 required careful maneuvering and repositioning—often involving a full 180-degree turn—to shift from indirect to direct fire modes, a process that exposed the thinly armored vehicle and open crew compartment to potential threats during adjustment. Crew exposure in the open-top area heightened risks from indirect fire and environmental factors, such as rain or dust, prompting occasional field modifications like sandbag additions for supplemental protection. Overall, these handling characteristics emphasized the M12's role as a mobile but vulnerable heavy artillery platform, reliant on combined arms support for effective deployment.

Production and Variants

Manufacturing Process

The M12 Gun Motor Carriage was manufactured by the Pressed Steel Car Company at its Hegewisch plant in , , with production commencing in September 1942 and totaling 100 units accepted by the U.S. Army. Assembly relied on converting surplus medium tank chassis, which involved repositioning the Wright R-975 radial engine from the rear to the vehicle's center to create space for the rear-mounted 155 mm M1 gun. Workers then fabricated an open-top superstructure from mild steel plates, installed the gun on a rear platform with a hydraulic recoil spade for stabilization, and integrated fire control systems, resulting in a unit cost of approximately $68,904 including armament. Early production encountered quality control challenges with the recoil mechanism, as the rear earth spade frequently caught on terrain even when retracted and suffered from hydraulic leaks, but these issues were addressed through adjustments during initial runs. Output remained constrained at 100 vehicles, as wartime priorities shifted toward higher-volume self-propelled artillery platforms like the M7 howitzer motor carriage on M3 chassis derivatives. Following delivery, units received field modifications in 1943 to enhance crew safety and communication, including the addition of top-hinged vision hatches for and mounts for radio equipment such as the SCR-508 set. In early 1944, refurbished 74 M12s starting in February to address engine issues and incorporate improved exhaust and flame arrestor systems, enhancing reliability before combat deployment. These upgrades addressed visibility limitations in the original design without altering core production processes. A portion of the M12 fleet was later adapted into the unarmed M30 cargo carrier variant for ammunition transport.

M30 Cargo Carrier Variant

The M30 Cargo Carrier was developed as the T14 pilot vehicle in 1942 to provide dedicated support for the M12 Gun Motor Carriage, addressing the limited onboard storage of the self-propelled gun. Standardized as the M30 in 1943, it utilized the M12's chassis but removed the 155 mm gun mount and enclosed , substituting an open-top cargo bed at the rear for logistical transport. This adaptation allowed the vehicle to function as a mobile resupply platform while maintaining compatibility with the M12's operational profile. The M30's cargo area was configured to carry 40 rounds of 155 mm ammunition, supplemented by 40 charges, fuses, and primers essential for the M1A1 gun's operation. A tailgate replaced the M12's for easier loading and unloading, and the included space for additional crew members. For protection, it mounted a .50 M2HB on a ring pedestal at the rear. The M30 shared the M12's chassis and propulsion system, ensuring similar cross-country mobility. Production commenced in late 1942 at the Pressed Steel Car Company—the same facility responsible for the M12—with a total of 100 units accepted into service. The design's simplified construction, lacking the complex gun assembly, streamlined manufacturing efforts. In 1944, rebuilt 74 M30s to mitigate engine issues and incorporate improved exhaust and flame arrestor systems, enhancing reliability in field conditions. Operationally, the M30 was integrated into M12-equipped batteries, typically operating in pairs to deliver resupply directly to firing positions. This arrangement provided superior mobility and responsiveness compared to towed trailers, enabling sustained long-range without excessive reliance on separate trains.

Operational History

Deployment and Organization

The M12 Gun Motor Carriage entered service with U.S. Army battalions in 1943, with one of the first units to receive the vehicles being the 991st Battalion, a former New York outfit. Crews underwent rigorous training lasting approximately 15 months at Army installations in the United States, with emphasis placed on coordination, for optimal positioning, and integration with supporting elements to compensate for the vehicle's thin armor and limited onboard . Organizationally, M12s were grouped into batteries of four vehicles each, with battalions usually comprising three such batteries for a total of 12 guns, accompanied by M30 cargo carriers to ferry additional 155 mm shells given the M12's capacity of only 10 rounds per vehicle. The primary battalions equipped with M12s included the 258th, 557th, 558th, 987th, and 991st Battalions, which provided mobile support to armored and divisions. Logistical support for M12 units proved challenging due to the vehicle's low production total of just 100 examples, resulting in scarce spare parts and maintenance difficulties in the field; as a result, formations often depended on conventional towed 155 mm guns for extended barrages while reserving the self-propelled M12s for rapid-response or direct-fire missions. Following refurbishment of 74 vehicles in early 1944, the M12s were deployed in support of the Normandy invasion. The 987th Field Artillery Battalion landed on on June 7, 1944, while the 991st landed on on July 11, 1944.

Combat Engagements

The M12 Gun Motor Carriage first saw combat in the European Theater during the campaign in summer 1944, where it supported Allied advances by delivering heavy and direct support against fortified positions. One early notable use was during the Siege of Brest in September 1944, where M12s provided against German bunkers, earning the nickname "Doorknocker." During the Normandy invasion and subsequent Western Front operations, the 987th and 991st Battalions, equipped with M12s, played key roles in the push inland, firing thousands of rounds to suppress enemy positions during the breakout from the and the in , where one battery alone expended over 1,000 shells in a single day to interdict retreating German forces. Later in the war, M12s saw extensive action on the Western Front, including the assaults near in October 1944 and the from December 1944 to January 1945, where they conducted long-range interdiction and against pillboxes, often advancing with to capture prisoners and disrupt German counterattacks. In one notable instance during the Roer River crossing in early 1945, the 991st Battalion fired the first Allied rounds onto German soil, demonstrating the M12's precision at ranges exceeding 10 miles. Overall, the M12 excelled in providing accurate, heavy at extended ranges—up to 12 miles—making it invaluable for counterbattery and tasks, though its thin armor and open-top design rendered it vulnerable to aerial attacks and necessitating careful positioning and . Across its service, M12-equipped battalions fired tens of thousands of rounds with minimal mechanical issues, underscoring its reliability in both mobile and static operations despite the challenges of hedgerow country and urban fighting.

Preservation and Legacy

Surviving Examples

The sole surviving M12 Gun Motor Carriage is on display at the at , , where it was restored in 2010 after previously being stored at the United States Army Ordnance Museum at , . This vehicle, serial number 37 with original registration number 4055526, bears the markings of "Adolph's Assassin," a nickname from its service with the 991st Battalion during . No confirmed surviving examples of the M30 Cargo Carrier variant are documented in reputable sources as of 2025, though historical records indicate approximately 100 were produced alongside the M12. Only one complete M12 is known to survive worldwide, with no confirmed surviving M30 examples.

Modern Significance

The M12 Gun Motor Carriage played a pivotal role in shaping U.S. Army artillery doctrine by demonstrating the value of highly mobile heavy systems during , influencing subsequent designs that prioritized rapid deployment and integration with mechanized forces. Its success in providing on-call bombardment for infantry and armored units paved the way for postwar developments, including the , which addressed limitations in crew protection and ammunition capacity while building directly on the M12's open-mount concept for quick setup and firing. This doctrinal shift toward emphasized survivability through speed rather than heavy armor, a principle that evolved into the fully enclosed series introduced in the , which further refined mobile for operations. Historical assessments of the M12 highlight its innovative adaptation of existing tank chassis for roles, earning praise for enabling unprecedented flexibility in WWII campaigns despite production constraints that limited it to just 100 units. Military historians note its effectiveness in against fortifications, such as during the assaults, but critique the open design's vulnerability to and small-arms threats, which exposed crews to shrapnel and required constant repositioning. These evaluations position the M12 as a transitional in evolution, bridging towed guns and modern self-propelled systems, and it remains a in official U.S. Army branch histories for lessons in balancing firepower with maneuverability. In military education, the M12 features prominently in training programs and public exhibits, with its sole surviving example at the U.S. Army Field Artillery Museum in , , used to illustrate WWII mechanized artillery tactics for both Soldiers and civilians. It appears in historical reenactments of D-Day and operations, as well as in scholarly books and documentaries on U.S. armored forces, such as those covering the evolution of in European theater engagements. These resources underscore the M12's role in teaching adaptability under fire, drawing parallels to contemporary artillery challenges. Recent analyses in the have revisited the M12's legacy amid rising drone-enabled threats, emphasizing its lessons in rapid mobility and decentralized as relevant to countering precision-guided munitions and unmanned systems on modern battlefields. The vehicle's emphasis on "" tactics, necessitated by its exposed design, informs discussions on enhancing survivability against aerial surveillance and strikes, influencing upgrades to systems like the M109A7 for greater dispersal and speed.

References

  1. https://www.thearmorylife.com/m12-gun-motor-carriage/
  2. https://afvdatabase.com/usa/155mmgmcm12.html
  3. https://www.dday-overlord.com/en/material/artillery/m12-gun-motor-carriage
  4. https://www.militaryfactory.com/armor/detail.php?armor_id=348
  5. https://www.army.mil/article/161550/field_artillery_museum_educates_public_soldiers
  6. https://www.globalsecurity.org/military/systems/ground/m12.htm
  7. https://www.tankarchives.com/2018/06/gmc-m12-king-kong-on-tracks.html
  8. https://www.historyofwar.org/articles/weapons_M12_155mm_GMC.html
  9. https://www.militaryfactory.com/armor/detail.php?armor_id=337
  10. https://www.hmdb.org/m.asp?m=69910
  11. https://bob.plord.net/Ships/Armor/UnitedStates/M12GMC.html
  12. https://afvdatabase.com/usa/cargocarrierm30.html
  13. https://goordnance.army.mil/HallOfFame/2010/2012/hansen.html
  14. https://panzerworld.com/product-prices
  15. https://usautoindustryworldwartwo.com/pressedsteel.htm
  16. https://afvdatabase.com/usa/pics/155mmgmcm12/155mmgmcm12.html
  17. https://www.armedconflicts.com/Cargo-Carrier-M30-t38839
  18. https://reviews.ipmsusa.org/review/m12-gun-motor-carriage-images-war
  19. http://the.shadock.free.fr/sherman_minutia/data/sherman_production.html
  20. https://www.army.mil/article/222814/d_day_75_ohio_national_guard_soldiers_who_were_there
  21. http://the.shadock.free.fr/Surviving_M12_M40_M43.pdf
  22. https://www.swoknews.com/sole-surviving-m12-restored-at-fort-sill/article_78d1f174-b5db-5dc9-9b8d-038dbee20750.html
  23. https://www.idga.org/land/articles/army-quest-for-next-generation-self-propelled-howitzer
  24. https://tanks-encyclopedia.com/ww2/us/155mm-gun-motor-carriage-m40-and-8-inch-howitzer-motor-carriage-m43/
  25. https://www.casematepublishers.com/9781526743527/m12-gun-motor-carriage/
  26. https://www.defensenews.com/global/europe/2024/06/13/artillery-goes-trucking-to-survive-drones-swarming-the-battlefield/
Add your contribution
Related Hubs
User Avatar
No comments yet.