Community hub
0 subscribers8 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to MP 59.
Nothing was collected or created yet.
MP 59
View on Wikipediafrom Wikipedia
 | This article needs additional citations for verification. (April 2020) |
| MP 59 | |
|---|---|
 Refurbished MP 59 train operating on Line 11 | |
 Renovated interior of an MP 59 train | |
| In service | 30 May 1963 – 13 June 2024 |
| Manufacturer | Alsthom, CEM, CIMT, Jeumont-Schneider |
| Replaced | Sprague-Thomson MP 55 |
| Constructed | 1963–1967 |
| Refurbished | 1989–1994 |
| Scrapped | 1999–2024 |
| Number built | 607 cars (101 trainsets) |
| Successor | MP 89, MP 14 |
| Formation |
|
| Operators | RATP |
| Lines served |
|
| Specifications | |
| Train length |
|
| Car length | 15 m (49 ft 3 in) |
| Width | 2.45 m (8 ft 0 in) |
| Doors | 4 pairs per side, per car |
| Maximum speed | 70 km/h (43 mph) |
| Traction system | Resistor control |
| Traction motors | Alsthom Type MP3 |
| Power output | 1,760 kW (2,360 hp) |
| Acceleration | 3.5 km/(h⋅s) (2.2 mph/s) |
| Deceleration | 4.5 km/(h⋅s) (2.8 mph/s) |
| Electric system(s) | Guide bar, 750 V DC |
| Current collection | Contact shoes, side running on the vertical face of the guide bars |
| Bogies | ANF Type MP59 |
| Braking system(s) | Disc, rheostatic |
| Track gauge | 1,435 mm (4 ft 8+1⁄2 in) standard gauge, with running pads for the rubber-tyred wheels outside of the steel rails |
The MP 59 (French: Métro Pneu appel d'offres de 1959; English: Rubber-tyred metro ordered in 1959) was a rubber-tyred variant of electric multiple units used on the Paris Métro system in service from 1963 to 2024. Manufactured by a consortium between CIMT-Lorraine (body), Jeumont-Schneider (control circuits), Alsthom and CEM (motors), they were first introduced in 1963 when the busiest routes of Lines 1 and 4 were converted to rubber-tyred pneumatic operation. The trains worked on Line 1 between 1963 and 2000, Line 4 between 1966 and 2012, and Line 11 between 1995 and 2024. By the time of their retirement in June 2024, the MP 59 trains (along with the Sprague-Thomson) were among the oldest trains still in use on any metro system in the world, at 61 years old.
Exit from Line 4
[edit]With the arrival of the MP 05 automated stock on Line 1, the remaining 48 MP 59 trains on Line 4 were replaced by the MP 89 CC (just like their Line 1 counterparts were). The first MP 89CC train (#01) arrived on Line 4 in April 2011 and went into service on May 23, 2011. The first MP 59 train to be retired from service was #049, which was withdrawn in April 2011. #021 was withdrawn on December 21, 2012, and was the last train to be retired.
It was originally speculated that some trains would be moved to Line 11 as a supplement, but such plans never came to fruition. All of the trains in service on Line 4 have been scrapped, the spare parts were salvaged for the remaining trains on Line 11.[1]
Exit from Line 11
[edit]Île-de-France Mobilités replaced the last MP 59 trains on Line 11 with 39 MP 14 trains: the replacement MP 14 trains for Line 11 are driver-operated and five cars long.[2][3] The last MP 59 trains were scheduled to run on 23 May 2024,[4] but a few trains were still in service as of June 2024.[5][6] The last MP 59 trains ran on Line 11 on June 12, 2024, before the line extension to Rosny–Bois-Perrier when six new stations opened on June 13, 2024.[7]
Gallery
[edit]-
MP 59 at Bastille station in 1964 -
Blue second-class and cream-coloured first class MP 59 cars in 1964 -
MP 59 trainset 6005 in "Métro-Vidéo" livery in 1989 -
An MP 59 leaving République on June 12, 2024, the last day of their service.
.jpg)
Technical specifications
[edit]- Train length: 90.390 m (296 ft 6+5⁄8 in)
- Overall width: 2.400 m (7 ft 10+1⁄2 in)
- Height of a train car above the running surface: 3.485 m (11 ft 5+1⁄4 in)
- Floor height above the running surface: 1.180 m (46.46 in)
- Weight in running order: 126.4 tonnes (124.4 long tons; 139.3 short tons)
- Maximum capacity (at four travelers / m2): 700 passengers including 144 seats
- Folding seats available off-peak: 146
- Maximum speed: 70 km/h (43 mph)
- Maximum power: 1,760 kW (2,360 hp)
- Average acceleration of 1.3 m/s2 (4.3 ft/s2) from 0 to 30 km/h (0 to 19 mph) (four travelers / m2);
- Maximum braking normal steady state: 2 m/s2 (6.6 ft/s2)
Other networks
[edit]- Montreal Metro had a forked version named MR-63
- Mexico City Metro has a forked version named MP-68
- Santiago Metro has a forked version named NS-74
References
[edit]- ^ "SYMBIOZ – M4 : Prolongement, arrivée du MP89 et réforme MP59".
- ^ "Alstom to supply 19 additional metros to Île-de-France Mobilités for line 11 of the Ile-de-France metro, operated by RATP". Alstom. Retrieved 2021-07-09.
- ^ "Alstom to build 19 more rubber-tyred metro trains for Paris". International Railway Journal. 2021-07-09. Retrieved 2021-07-09.
- ^ "« Dans les années 1960, il était modernissime » : dernier voyage pour le plus vieux métro parisien" (in French). Le Parisien. 23 May 2024. Retrieved 23 May 2024.
- ^ "Ligne 11 : MP59 le 08/06/2024". YouTube. June 8, 2024. Retrieved June 8, 2024.
- ^ "Video of Thomas75013". May 30, 2024. Retrieved May 30, 2024.
- ^ "Paris : Le prolongement de la ligne 11 du métro officiellement présenté". CNews (in French). June 13, 2024. Retrieved June 13, 2024.
- The information in this article is based on that in its French equivalent
External links
[edit]
Media related to MP 59 at Wikimedia Commons- TRUCK (bogie) Archived 2016-06-16 at the Wayback Machine
Paris Métro rolling stock  | ||
|---|---|---|
| Current steel wheel |  | |
| Current rubber tyred | ||
| Former steel wheel |
| |
| Former rubber tyred | ||
| Planned steel wheel | ||
| Others | ||
| Current |
| ||||
|---|---|---|---|---|---|
| Former | |||||
MP 59
View on Grokipediafrom Grokipedia
The MP 59 was a rubber-tyred electric multiple unit trainset used on the Paris Métro system, manufactured by a consortium including CIMT, Alstom, CEM, and Jeumont-Schneider, and operated by the RATP from 1963 until its full retirement on 12 June 2024 after 61 years of service.[1][2][3]
Introduced as an evolution of earlier designs like the MP 55, the MP 59 consisted of 100 trainsets, each originally comprising six cars (later shortened to four for certain lines), with a maximum speed of 70 km/h and a distinctive non-intercirculating layout that prioritized efficient urban transit in Paris's dense network.[1][2] These trains were first deployed on Line 1 in 1963, where they ran until 1998, and on Line 4 starting in 1966 until 2012, with transfers to Line 11 from 1995 until their withdrawal.[2][1][3]
The MP 59's retirement was accelerated by the extension of Line 11 to Rosny—Bois-Perrier, inaugurated on June 13, 2024, which necessitated longer MP 14 trainsets to handle increased capacity; the final passenger run occurred on May 23, 2024, marking an emotional farewell attended by RATP executives and rail enthusiasts.[2][3] Modernized in the 1990s for improved reliability, the series symbolized mid-20th-century Parisian transit innovation but was phased out starting in 1997 with the arrival of newer MP 89 and MP 14 models across the network.[2][1] One preserved unit, motor car M 3204 from 1967, remains in RATP's historical reserve at Villeneuve-Saint-Georges for educational purposes.[1]
Development and Introduction
Design Origins
The MP 59 was developed in the late 1950s by the Régie Autonome des Transports Parisiens (RATP) to address the growing demands of high-traffic Paris Métro lines, particularly the need for quieter operation and smoother rides amid increasing ridership and urban density. This initiative built directly on the experimental MP 55 prototype, introduced in 1956 on Line 11, which had demonstrated the viability of rubber-tyred technology for reducing noise and vibrations while improving traction and passenger comfort. The MP 59 represented the first mass-produced implementation of this system, shifting from the limitations of traditional steel-wheeled trains like the aging Sprague-Thomson stock, which suffered from excessive racket and discomfort on busy routes.[4][5] A consortium of French manufacturers was assembled to realize the design: Alsthom provided electrical equipment, Compagnie Électro-Mécanique (CEM) handled mechanical components, Compagnie Industrielle de Matériel de Transport (CIMT) developed the rubber tyres and bogies, and Jeumont-Schneider supplied the motors. Production commenced in 1963, with the MP 59 featuring key innovations such as rubber-tyred wheels that minimized noise and vibration, a non-articulated configuration consisting of six cars per trainset (four powered motor cars and two unpowered trailers), and automatic coupling for efficient assembly and maintenance. These elements were engineered to enhance reliability and ease of operation in the constrained urban environment of Paris.[5][4] The initial order placed in 1959 comprised 100 trainsets, totaling 600 cars, which were constructed between 1963 and 1967 specifically to replace the outdated Sprague-Thomson trains on Lines 1 and 4. Design priorities emphasized a capacity of approximately 700 passengers per trainset to accommodate peak-hour crowds, alongside robust reliability for intensive daily service, though air conditioning was omitted in the original builds to control costs and complexity—later additions addressed comfort issues during operations. This focused approach ensured the MP 59 could handle dense urban transit without the frequent disruptions common in earlier rolling stock.[5]Manufacturing and Deployment on Line 1
The MP 59 rolling stock was produced by a consortium of French manufacturers, including Alsthom for electrical equipment and CIMT for bodies and assembly, as a rubber-tyred evolution of the experimental MP 55 trains.[2] Production and delivery spanned 1963 to 1967, with the initial units allocated to Line 1 arriving between 1963 and 1964, followed by additional sets for Line 4 in 1966–1967.[1] A total of 100 trainsets were built, each consisting of six cars configured as two end motor cars (NA) with cabs, two intermediate motor cars (N), one first-class trailer (A), and one mixed trailer (B). Deployment on Line 1 began in 1963, with the MP 59 gradually replacing the aging Sprague-Thomson stock to modernize the route from Pont de Neuilly to Château de Vincennes.[2] By the mid-1960s, the new trains had fully transformed operations on this key east-west artery, enabling higher frequencies and better handling of surging ridership amid Paris's post-war urban expansion. The rubber-tyred design contributed to smoother rides and reduced noise, enhancing overall passenger comfort and reliability during peak periods.[6] These improvements quickly boosted user satisfaction, as the MP 59's greater capacity and grip on tracks supported efficient transport for growing commuter demands.[6] The MP 59 remained the primary stock on Line 1 through the late 20th century, operating until 2000 when it was phased out in favor of the MP 89 amid automation upgrades.[7] Early adaptations were minimal, with no significant overhauls until the 1990s, when selected units received interior refurbishments—including updated seating and lighting—to extend service life prior to transfers to Line 4.[2][8]Operational History
Service on Line 4
The MP 59 stock began supplementing older Sprague-Thomson trains on Paris Métro Line 4 in 1966, following its initial deliveries specifically for the line's conversion to rubber-tyred operation between October 1966 and July 1967.[9] By the early 1970s, the MP 59 had fully replaced the legacy stock, providing the primary rolling stock on the north-south route from Porte de Clignancourt to Mairie de Montrouge, where it operated reliably until 2012.[10] This transition marked a significant upgrade in ride comfort and noise reduction due to the rubber tyres, aligning with Line 4's role as a vital artery connecting key districts across the Seine.[11] During the 1990s, the fleet underwent major refurbishments to extend its service life and address operational demands on Line 4's challenging terrain, which includes steep gradients requiring enhanced braking capabilities. Between 1989 and 1992, renovations included the installation of individual grey-blue and red anti-vandalism seats, removal of metal luggage racks, and upgraded fluorescent lighting for improved interior visibility and energy efficiency.[11] Further adaptations in the mid-1990s focused on rheostatic braking systems to better handle the line's inclines, alongside exterior repainting to RATP's white and jade green livery.[10] By 2000, the fleet on Line 4 had grown to approximately 80 trainsets, incorporating all remaining MP 59 units transferred from Line 1 after the last such move on June 24, 2000.[10] Operationally, the MP 59 facilitated peak service levels on Line 4, handling around 700,000 daily passengers and underscoring the line's status as the network's second-busiest route and primary north-south spine. However, the stock faced notable challenges, including the absence of air conditioning, which led to passenger discomfort and overheating during summer heatwaves.[12] High energy consumption from rheostatic braking exacerbated operational costs, while aging components contributed to reliability issues in the 2000s, prompting additional maintenance overhauls to sustain service frequency.[10]Service on Line 11
In 1995, 24 refurbished MP 59 trainsets were transferred from Line 4 to Line 11 of the Paris Métro, marking the beginning of their deployment on this shorter north-south route spanning 6.3 km from Châtelet to Mairie des Lilas.[13][14] These rubber-tyred trains fully replaced the aging MP 55 stock by January 1999, providing reliable service on the line's steep gradients and frequent stops.[15][13] The shorter length of Line 11 enabled high-frequency operations, with MP 59 trains typically running in 4-car formations to match the line's moderate demand and platform lengths.[16] Minor upgrades, including compatibility enhancements for the line's manual signaling system, ensured smooth integration without major overhauls.[17] Daily operations focused on serving eastern Paris suburbs and connecting key interchanges like République and Belleville, accommodating peak loads of approximately 130,000 passengers per day in the pre-extension era.[18] As the MP 59's final operational home, the fleet supported consistent service through the 2000s and 2010s, with routine maintenance addressing wear from rubber-tyred propulsion on the line's varied terrain. By the 2020s, the active fleet had stabilized at 24 trainsets, though aging components such as tires and electrical systems necessitated increased upkeep to maintain reliability. No major incidents were recorded during this period, but preparations for Line 11's eastward extension prompted a gradual reduction in routine use starting around 2020.[15][7]Retirement and Replacement
Withdrawal from Line 4
The replacement of the MP 59 stock on Line 4 was announced in the 2000s as part of RATP's rolling stock modernization efforts, with the air-conditioned, six-car MP 89 CC trains introduced starting in May 2011 to enhance passenger comfort and capacity. The first MP 89 CC unit arrived in April 2011, marking the beginning of a gradual phase-out that saw the first MP 59 trainset retired the same month.[19] The withdrawal process was conducted in a cascading manner over 2011 and 2012, allowing for a smooth transition without major service disruptions on the busy north-south line. By the end of 2012, all MP 59 trainsets had been removed from Line 4 service, with the final unit (#6021) withdrawn on 21 December 2012 after more than 45 years of operation since its initial deployment in 1967.[19] Instead, most of the fleet was sent to the Vaugirard depot for scrapping, where over 80 trainsets were dismantled between 2013 and 2015; useful components, such as motors, were salvaged and repurposed for the remaining MP 59s still in use on Line 11.[9] The replacement significantly improved conditions on Line 4 by introducing air-conditioned cars and more efficient propulsion systems, which reduced overall energy consumption. Some cars were temporarily retained for training purposes before full decommissioning.Withdrawal from Line 11
The withdrawal of the MP 59 stock from Paris Métro Line 11 formed a key component of the network's expansion, coinciding with the extension from Mairie des Lilas to the new terminus at Rosny–Bois-Perrier, which added six stations and effectively doubled the line's length when it opened on 13 June 2024.[18][17] This upgrade replaced the aging MP 59 fleet with 39 new five-car MP 14 trainsets, designed for enhanced accessibility, energy efficiency, and capacity to accommodate up to 562 passengers per train compared to 452 on the MP 59.[15][16] Testing of the MP 14 on Line 11 commenced in 2023, with progressive integration into service beginning in June of that year to prepare for the extension.[18] The final scheduled MP 59 operations occurred on 23 May 2024, after which a limited number of trainsets provided unscheduled support until 12 June 2024, ensuring seamless transition ahead of the extension's launch.[6][20] Farewell events in May and June 2024, including special runs and public tributes, highlighted the MP 59's 61-year operational history from 1963 to 2024, marking the close of an era for one of the Paris Métro's pioneering rubber-tyred stocks.[6] By mid-2024, all MP 59 units had been fully retired from service, with no transfers to other lines and the remaining approximately 23 trainsets slated for disposal, including scrapping and component reuse across RATP's fleet.[21][16]Technical Specifications
Physical Dimensions and Capacity
The MP 59 trainset had an overall length of 90.39 m for the original 6-car formation (M-N-A-B-N-M) used on Lines 1 and 4, or approximately 60.6 m for the 4-car formation (M-N-A-M) used later on Lines 4 and 11.[1] The width was 2.40 m, and the height was 3.49 m above the rail level.[22] The floor height was 1.18 m above the rail, facilitating efficient passenger flow.[22] Individual cars measured approximately 15.065 m in length for the 6-car sets. The empty weight of the 6-car trainset was 126.4 tonnes, with a service weight of approximately 152 tonnes to support passenger loads.[22] The MP 59 consisted of motor cars (M with driver's cab, N without) and trailer cars (A, B), connected with standard couplers and equipped with independent rubber-tyred bogies for smooth operation, enabling step-free boarding at standard platforms. The 6-car formation had four motor cars and two trailers, while the 4-car had three motor cars and one trailer. The design prioritized standing room for metro use, with 144 seats per 6-car trainset (approximately 24 per car) and a comfort capacity of 700 passengers at 4/m². Crush load capacity was approximately 1,024 at 6/m².[22] No dedicated wheelchair spaces were provided, consistent with accessibility standards of the pre-1990 era when the trains were developed.Propulsion System and Performance
The MP 59 trainset employed a DC electric propulsion system powered by an overhead third rail at 750 V. Each motor car was fitted with four TIB 8 series traction motors, providing a total power output of 1,760 kW for the trainset (four motor cars in 6-car formation, three in 4-car).[22] This configuration enabled reliable operation in the demanding urban environment of the Paris Métro, with the motors optimized for frequent starts and stops characteristic of inner-city lines. Operational performance was tailored for metro service, with a maximum speed of 70 km/h to suit track constraints and station spacing. Acceleration reached 1.3 m/s² (0 to 30 km/h at 4/m²), while service deceleration stood at 1.2 m/s² and emergency braking at 2.0 m/s², ensuring smooth passenger experience and safety.[22] The braking system combined rheostatic braking, which dissipated kinetic energy as heat via resistors, alongside pneumatic and electric components for progressive control; this rheostatic element notably contributed to elevated temperatures on Line 4 due to heat buildup in the enclosed tunnels.[23][24] Efficiency benefits stemmed from the rubber-tyred design, which lowered rolling resistance compared to steel wheels, yielding an average in-service speed of 25 km/h and energy consumption of 5–6 kWh/km. Each bogie featured four rubber tyres for primary load-bearing and propulsion, supplemented by two steel guidance wheels per axle for lateral stability and rail contact during curves or emergencies. Maintenance involved routine tyre replacement every 100,000 km to sustain performance and safety, a process that highlighted the system's durability over decades of intensive use.[24]| Parameter | Value |
|---|---|
| Total Power | 1,760 kW |
| Maximum Speed | 70 km/h |
| Acceleration | 1.3 m/s² |
| Service Deceleration | 1.2 m/s² |
| Emergency Deceleration | 2.0 m/s² |
| Average Service Speed | 25 km/h |
| Energy Consumption | 5–6 kWh/km |