Hubbry Logo
Radio access technologyRadio access technologyMain
Open search
Radio access technology
Community hub
Radio access technology
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Radio access technology
Radio access technology
Radio access technology
View on Wikipedia
from Wikipedia

A radio access technology (RAT) is the underlying physical connection method for a radio communication network. Many modern mobile phones support several RATs in one device such as Bluetooth, Wi-Fi, and GSM, UMTS, LTE or 5G NR.

The term RAT was traditionally used in mobile communication network interoperability.[1] More recently, the term RAT is used in discussions of heterogeneous wireless networks.[2] The term is used when a user device selects between the type of RAT being used to connect to the Internet. This is often performed similar to access point selection in IEEE 802.11 (Wi-Fi) based networks.[3]

Inter-RAT (IRAT) handover

[edit]

A mobile terminal, while connected using a RAT, performs neighbour cell measurements and sends measurement report to the network. Based on this measurement report provided by the mobile terminal, the network can initiate handover from one RAT to another, e.g. from WCDMA to GSM or vice versa. Once the handover with the new RAT is completed, the channels used by the previous RAT are released.[4]

See also

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Radio access technology

View on Grokipedia
from Grokipedia
Radio access technology (RAT) refers to the underlying physical connection method for radio-based communication , providing access through radio media to enable connectivity between user devices, such as mobile phones and IoT sensors, and the core network. These technologies facilitate ubiquitous mobile services, including voice calls, , and multimedia applications, by defining the standards for , modulation, and spectrum usage in cellular systems. RATs are integral to the (RAN), which consists of base stations, antennas, and processing units that manage radio links over geographic cells to ensure coverage and capacity. The evolution of RATs has progressed through generations, starting with first-generation () analog systems in the late 1970s that supported basic voice services, followed by second-generation () digital technologies like in the 1990s for improved efficiency and . Third-generation () RATs, such as and , introduced around 2000, enabled higher data rates for mobile internet and video calling. Fourth-generation () LTE, standardized in 2009, shifted to all-IP networks with speeds up to 100 Mbps, supporting streaming and cloud services. The fifth generation (), with its New Radio (NR) interface released in 2018, offers peak speeds exceeding 1 Gbps using sub-6 GHz and millimeter-wave bands, incorporating advanced features like massive and beamforming for enhanced capacity in applications such as autonomous vehicles and smart cities. Key types of RATs include those developed by standards bodies like (e.g., , LTE, , NB-IoT) and 3GPP2 (e.g., ), alongside non-cellular options such as and for specific use cases like wide-area IoT. Modern RAT implementations emphasize virtualization through Cloud RAN (C-RAN) and open architectures like Open RAN, which disaggregate hardware and software to improve flexibility, reduce costs, and support multi-vendor . These advancements address growing demands for low-latency, high-reliability connections in heterogeneous networks that integrate multiple RATs for seamless and spectrum efficiency.

Fundamentals

Definition and Scope

Radio access technology () refers to the underlying physical and protocol framework that enables communication between , such as smartphones and IoT devices, and the (RAN), facilitating the transmission of voice, data, and signaling over radio frequencies. It defines the air interface specifications, including modulation, coding, and , to establish and maintain connections in cellular and systems. The scope of RAT is distinct from core network technologies, which focus on packet routing, , and service provisioning; instead, RAT concentrates on the air interface standards, particularly the physical (PHY) layer protocols that handle uplink communication (from to ) and downlink communication (from to ). This includes defining how signals are encoded, transmitted, and received over the radio medium to support reliable connectivity. Core principles of RAT encompass allocation, where frequencies are divided into licensed bands for exclusive operator use to ensure and unlicensed bands for open, shared access to promote innovation, all coordinated by international regulators to avoid interference. Signal propagation fundamentals involve , the progressive weakening of signal power due to distance and free-space spreading, and , resulting from multipath reflections, , and absorption by environmental obstacles. Regulatory frameworks, such as those from the (ITU), establish global standards for RAT to ensure interoperability, allowing seamless operation across international borders and diverse networks. Within this scope, manages essential operations like initial connection setup through procedures that synchronize devices and allocate initial resources, data transmission via coordinated uplink and downlink channels for efficient delivery, and disconnection via release mechanisms that free up radio resources, all executed at the air interface without impacting core network functions.

Key Components and Principles

Radio access technology (RAT) relies on a combination of hardware and software components to enable communication between user devices and network infrastructure. Key hardware elements include base stations, which serve as the central transmission and reception points for radio signals, such as the evolved Node B (eNodeB) used in LTE systems to manage cell coverage and handovers. User equipment (UE) transceivers, found in devices like smartphones and IoT modules, handle the modulation, , and amplification of signals at the endpoint. Antennas, particularly multiple-input multiple-output () arrays, enhance by allowing simultaneous transmission and reception over multiple paths, with massive MIMO configurations employing dozens or hundreds of antenna elements at base stations to support higher data rates and . Software components form the logical framework for managing data flow and resources within RAT systems. Protocol stacks, adapted from the , include the physical (PHY) layer for signal transmission over the air interface and the (MAC) layer for coordinating access to the shared medium. Control signaling protocols facilitate by dynamically assigning frequency-time resources to users based on demand, ensuring efficient use and minimizing interference through mechanisms like scheduling grants. These software elements operate in a layered , where the PHY handles coding and modulation while the MAC manages contention and prioritization. At the core of RAT are physical principles governing signal transmission. Electromagnetic wave propagation follows , where radio waves travel through free space, reflection, , and in the environment, influencing and . Frequency bands are categorized into sub-6 GHz ranges, which provide better penetration and coverage for urban and indoor scenarios, and millimeter-wave (mmWave) bands above 24 GHz, offering wider bandwidths but shorter range due to higher . The fundamental limit of is described by the Shannon-Hartley theorem:
C=Blog⁡2(1+SNR)C = B \log_2 (1 + \text{SNR})
where CC is the capacity in bits per second, BB is the bandwidth in hertz, and SNR is the , establishing the theoretical maximum data rate for a noisy channel. Interoperability ensures that diverse hardware and software components from multiple vendors function seamlessly across networks. This is achieved through standardized interfaces and protocols, such as those defined by , which specify open APIs and compliance testing to guarantee compatibility between base stations, UEs, and core networks, enabling multi-vendor deployments without proprietary lock-in.

Historical Development

Early Wireless Systems

The pre-2G era of radio access technology was dominated by analog systems that laid the groundwork for cellular , the (AMPS) became the first commercial cellular network, launching on October 13, 1983, in , and relying on (FDMA) to allocate separate frequency channels to users for simultaneous voice transmission. In , the (NMT) system preceded AMPS, debuting in on October 1, 1981, and also employing FDMA principles to enable across through standardized analog signaling. These systems supported basic voice services but suffered from limited capacity due to inefficient spectrum use, as each call required a dedicated analog channel prone to interference and . The transition to access in the late 1980s and early was driven by the need for greater spectrum efficiency and enhanced , as analog systems could not accommodate growing subscriber demands without expanding . Digital encoding allowed multiple users to share channels via time or code division, tripling or more the capacity per frequency band compared to FDMA alone, while introducing to protect against unauthorized . A pivotal event facilitating this shift was the U.S. Federal Communications Commission's (FCC) inaugural on July 25, 1994, which allocated licenses for narrowband personal communications services (PCS) and introduced competitive bidding to accelerate digital deployment. Early digital prototypes emerged as interim solutions to upgrade existing analog networks. In the U.S., the IS-54 standard, approved in 1991, introduced (D-AMPS) using (TDMA) to divide each 30 kHz channel into three time slots, thereby supporting more calls without immediate full replacement of AMPS infrastructure. However, IS-54's limitations included low rates below 10 kbps, primarily suited for digitized voice at around 7.95 kbps per channel, with circuit-switched services constrained by narrow bandwidth and lacking support for advanced . Regionally, the path to digital varied significantly, reflecting differing regulatory and industrial priorities. In , the push for a unified digital standard began in the 1980s under the Conference of European Posts and Telecommunications (CEPT), culminating in the Groupe Spécial Mobile () initiative to ensure pan-European compatibility and spectrum harmonization. In contrast, the U.S. pursued a more fragmented approach in the early 1990s, with trials of (CDMA) by alongside TDMA upgrades like IS-54, allowing operators flexibility but complicating interoperability across borders. These early efforts set the stage for formalized standards.

Evolution from 2G to 5G

The evolution of radio access technologies () from to represents a progression driven by demands for higher data rates, improved efficiency, and support for diverse applications, transitioning from voice-centric digital systems to high-speed, low-latency networks capable of handling massive connectivity. Each generation built upon the previous by enhancing utilization, introducing advanced modulation, and standardizing under international bodies like the ITU and , with key innovations addressing capacity limitations and emerging use cases such as mobile internet and IoT. This generational shift also involved a brief evolution in multiple access methods, from (TDMA) in to (OFDMA) in and beyond. Second-generation (2G) technologies marked the advent of fully digital cellular networks, replacing analog systems with secure, efficient voice transmission and basic data services. The (GSM), standardized by ETSI and launched commercially in 1991 across Europe, became the dominant 2G standard, supporting digital voice calls, (SMS), and initial data rates up to 9.6 kbps via circuit-switched channels. In parallel, the (CDMA)-based IS-95 standard, developed by and approved by the TIA in 1995 for the market, offered similar voice capabilities with improved through spread-spectrum techniques, paving the way for global adoption as it evolved into . By the late 1990s, 2G networks had achieved widespread deployment, with approximately 740 million subscribers worldwide by 2000, driven by interoperability and low-cost handsets. Third-generation (3G) systems, formalized under the ITU's International Mobile Telecommunications-2000 (IMT-2000) framework in 1999, focused on packet-switched data to support mobile internet and multimedia, achieving peak speeds of 384 kbps in wide-area coverage. The Universal Mobile Telecommunications System (UMTS) using Wideband CDMA (W-CDMA), released by in 2001 and commercially deployed in by , represented the European evolution of , incorporating higher bandwidth (5 MHz) for video calling and web browsing. Complementing this, , an upgrade from IS-95 under 3GPP2, also launched around 2001 in and Korea, offering and similar data rates. These advancements quadrupled 2G capacities in many cases, with global 3G subscriptions surpassing 1 billion by 2010, fueled by the rise of smartphones. Fourth-generation (4G) Long-Term Evolution (LTE), specified by 3GPP in Release 8 and first commercialized in 2009 by operators like TeliaSonera in , shifted to all-IP networks with OFDMA for downlink and (SC-FDMA) for uplink, delivering peak download speeds exceeding 100 Mbps and latencies under 100 ms. LTE-Advanced, introduced in Release 10 in 2011, further enhanced performance through , combining multiple frequency bands to achieve up to 1 Gbps, enabling streaming and services. By 2017, 4G accounted for about 26% of global mobile connections, with adoption accelerated by affordable 4G devices. Fifth-generation (5G) New Radio (NR), defined in 3GPP Release 15 and seeing initial commercial rollouts in 2019 by Verizon in the and other operators worldwide, targets ultra-reliable low-latency communications (URLLC) under 1 ms and massive machine-type communications (mMTC) for IoT, with theoretical peak speeds up to 20 Gbps via millimeter-wave and massive . Key drivers include support for autonomous vehicles, , and industrial automation, with enhanced (eMBB) as an initial focus. 5G adoption has continued to grow, surpassing 2 billion connections by 2024 and representing about 25% of global mobile connections as of early 2025, according to reports, with increasing focus on standalone networks and new allocations.
GenerationKey StandardsMajor Release/Commercialization DatePeak Data SpeedNotable Adoption Milestone
2G, IS-951991 (GSM), 1995 (IS-95)9.6 kbps~740 million subscribers by 2000
3G/WCDMA, 2001384 kbps>1 billion subscriptions by 2010
4GLTE, LTE-Advanced2009 (LTE), 2011 (LTE-Advanced)>100 Mbps (LTE), 1 Gbps (LTE-A)~26% of global connections by 2017
5G201920 Gbps>2 billion connections by 2024 (~25% of global)

Major Types and Standards

Second-Generation (2G) Technologies

Second-generation () radio access technologies marked the transition from analog to digital cellular systems, primarily focusing on efficient voice communication and introducing basic data services. These standards, developed in the late and deployed in the early 1990s, emphasized improved , security, and global compared to first-generation systems. The two dominant 2G standards were the Global System for Mobile Communications (GSM) and Code Division Multiple Access (CDMA), each employing distinct multiple access techniques to manage radio resources. GSM, standardized by the European Telecommunications Standards Institute (ETSI), utilizes as its core multiple access method, combined with . It operates on carriers spaced at 200 kHz intervals, with each carrier divided into eight time slots per frame, enabling up to eight simultaneous voice channels per carrier. This architecture supported digital voice encoding at 13 kbps using full-rate codecs, facilitating clear audio transmission over circuit-switched networks. By the mid-2000s, GSM achieved over 80% global , becoming the in more than 200 countries due to its open architecture and support for international roaming via standardized SIM cards. In contrast, CDMA, particularly the Interim Standard-95 (IS-95) developed by the (TIA), employs techniques to allow multiple users to share the same frequency band simultaneously. IS-95 uses 64-bit Walsh codes to orthogonally separate user signals within a cell, minimizing intra-cell interference, while pseudo-noise (PN) sequences distinguish signals across cells. This code-based approach enhances spectrum efficiency, potentially supporting up to three times more users per MHz than TDMA systems under similar conditions. CDMA also introduced , where a mobile device maintains connections to multiple base stations during transitions, reducing call drops compared to hard handoffs in TDMA. Key features of 2G technologies centered on circuit-switched voice services, delivering toll-quality audio at rates around 13 kbps, with basic security provided by stream ciphers like the A5 family of algorithms in to protect over-the-air communications. To address growing data demands, enhancements such as General Packet Radio Service (GPRS) and Enhanced Data rates for GSM Evolution (EDGE) were introduced as "2.5G" extensions. GPRS enabled packet-switched data at up to 115 kbps by aggregating multiple time slots, while EDGE improved this to theoretical peaks of 384 kbps using 8-PSK modulation on the same infrastructure, without requiring new spectrum allocations. CDMA variants similarly added packet data capabilities, though at lower initial rates. The impacts of technologies were profound, enabling seamless international roaming that allowed users to access services across borders using a single , fostering global mobile adoption. , introduced as a low-bandwidth service in , exploded in popularity, with global volumes reaching approximately 1.37 billion messages per day by 2004, driven by its simplicity and low cost. Security features like A5 provided basic , though later vulnerabilities were identified. Overall, 2G laid the foundation for ubiquitous mobile connectivity, with deployments exceeding 2 billion subscribers by the late .
AspectGSM (TDMA/FDMA)CDMA (IS-95)
Spectrum EfficiencyModerate; ~8 users per 200 kHz carrierHigher; ~3x more users per MHz via
Deployment CostsLower initial due to simpler base stationsHigher upfront for rake receivers, but lower long-term opex

Third-Generation (3G) and Beyond

The third-generation () radio access technologies, standardized under the International Telecommunication Union's (ITU) IMT-2000 framework, marked a significant advancement in mobile communications by emphasizing higher data rates and capabilities over voice-centric systems. These technologies enabled global roaming through harmonized spectrum allocations and supported peak data speeds up to several megabits per second, facilitating the transition from circuit-switched to packet-switched architectures for more efficient data handling. Two primary families emerged: the Universal Mobile Telecommunications System () based on Wideband Code Division Multiple Access (WCDMA) developed by the 3rd Generation Partnership Project (), and the family from the 3GPP2 partnership. UMTS/WCDMA utilized a 5 MHz channel bandwidth to achieve improved through wideband spreading and fast , enabling initial downlink data rates of up to 384 kbps in pedestrian environments. Enhancements like High-Speed Downlink Packet Access (HSDPA) and High-Speed Uplink Packet Access (HSUPA), introduced in 2006, boosted downlink speeds to 14 Mbps via adaptive modulation, (HARQ), and multiple-input multiple-output () techniques, while shifting to an all-IP packet-switched core network for seamless data transport. This architecture supported diverse applications, including mobile internet browsing and email, with backward compatibility to networks. In parallel, evolved from IS-95 CDMA with its 1x variant providing voice and low-rate data over 1.25 MHz carriers, but focused on data through 1x (Evolution-Data Optimized), which achieved peak downlink speeds of up to 3.1 Mbps in Revision A using advanced modulation and scheduling. Multi-carrier extensions in later revisions aggregated channels for higher throughput, maintaining compatibility with existing infrastructure while adding packet data optimizations. Key innovations in included always-on connectivity via features like Continuous Packet Connectivity (CPC) in HSPA, which minimized signaling overhead and battery drain for persistent data sessions, alongside robust multimedia support such as video calling over (IMS). These aligned with IMT-2000 requirements for 144 kbps mobility and 2 Mbps stationary rates, driving global adoption with subscriptions reaching 940 million by 2010 and peaking at over 1 billion in the mid-2010s. Transitional enhancements like HSPA+ extended capabilities to 42 Mbps downlink using dual-carrier aggregation and higher-order modulation, serving as a bridge to (OFDMA)-based systems in subsequent generations. However, escalating data demand exposed limitations in spectrum availability, with 5 MHz channels proving insufficient for broadband scaling, prompting the industry push toward wider bandwidths in .

Fourth-Generation (4G) LTE

Long Term Evolution (LTE), standardized by the 3rd Generation Partnership Project (3GPP), serves as the primary radio access technology for fourth-generation (4G) mobile networks, emphasizing high-speed data connectivity and all-IP architecture. The LTE radio access network, known as Evolved Universal Terrestrial Radio Access Network (E-UTRAN), features eNodeBs as the sole radio base stations, eliminating the need for separate radio network controllers to simplify the structure and reduce latency. Downlink transmissions utilize Orthogonal Frequency Division Multiple Access (OFDMA) for robust multi-user spectrum efficiency, while uplink employs Single Carrier Frequency Division Multiple Access (SC-FDMA) to minimize power consumption in user equipment. This design integrates seamlessly with the flat all-IP Evolved Packet Core (EPC), enabling efficient packet-switched handling of both data and voice traffic across the network. Key enhancements in LTE, particularly through LTE-Advanced, include , which combines up to five component carriers to support aggregated bandwidths reaching 100 MHz, thereby increasing throughput capacity. configurations, such as 4x4 setups, leverage to boost and data rates in favorable channel conditions. Additionally, (VoLTE) facilitates circuit-quality voice services over the IP-based packet network using the (IMS), supporting real-time communication without fallback to legacy systems. LTE Release 8, completed in December 2008, established the foundational specifications with theoretical downlink peak data rates of up to 300 Mbps under ideal conditions using 20 MHz bandwidth and 2x2 MIMO. LTE-Advanced, introduced in Release 10 and frozen in March 2011, extended capabilities to 1 Gbps downlink peaks through wider bandwidth aggregation and advanced MIMO, marking it as compliant with International Telecommunication Union (ITU) 4G requirements. In practical deployments, LTE achieves real-world downlink speeds of 100-300 Mbps, influenced by factors like spectrum allocation, network load, and device capabilities. To address capacity demands in urban environments, LTE incorporates small cell enhancements, deploying low-power base stations to offload from macro cells and improve coverage in high-density areas. Self-Organizing Networks (SON) automate network management through functions like self-configuration for new cells, self-optimization of parameters such as thresholds, and self-healing to detect and mitigate faults, reducing operational costs. By the end of 2023, global LTE connections surpassed 5 billion, accounting for the majority of mobile subscriptions and powering over 70% of cellular . This widespread has driven explosive mobile growth, increasing nearly 300-fold from 2011 to 2021 and contributing to an estimated $6.5 trillion in annual economic value from mobile technologies and services. LTE paves the way for its successor, New Radio, by providing a scalable foundation for enhanced .

Fifth-Generation (5G) and Emerging Standards

Fifth-Generation () New Radio (NR) represents a significant advancement in radio access technology, defined by the starting with Release 15 in 2018. The framework is built around three primary usage pillars: enhanced (eMBB) for high-speed data services, Ultra-Reliable Low-Latency Communications (URLLC) for mission-critical applications requiring 99.9999% reliability and end-to-end latency as low as 50 ms, and massive Machine-Type Communications (mMTC) to support dense deployments of (IoT) devices with high traffic densities. operates across sub-6 GHz bands for broader coverage and mmWave bands (above 24 GHz) for higher capacity, enabling peak downlink speeds up to 10 Gbps in optimal conditions through wider channel bandwidths and advanced modulation. As of late 2025, global population coverage exceeds 60%, facilitating widespread adoption of applications such as / (AR/VR) and autonomous vehicles that demand these enhanced capabilities. The 5G architecture supports both Non-Standalone (NSA) and Standalone (SA) deployment modes, with NSA leveraging existing 4G LTE core networks for initial rollouts and SA enabling a fully independent 5G core for optimized performance. Central to the radio access network is the gNodeB (gNB), which incorporates massive MIMO and beamforming techniques to direct signals precisely toward users, improving efficiency in high-frequency bands and supporting higher data rates. Network slicing further enhances virtualization by creating logical networks on shared infrastructure, each tailored to specific service requirements like eMBB or URLLC, ensuring isolation and customized resource allocation to meet diverse service level agreements. Key enhancements in subsequent 3GPP releases have expanded 5G's scope. Release 15, frozen in June 2018, established the foundational NR specifications for initial commercial deployments. Releases 16 and 17, completed between 2020 and 2022, introduced features for industrial IoT, including improved URLLC for factory automation and . Release 17 also defined Reduced Capability () devices, which reduce complexity, antenna counts, and power consumption for mid-tier IoT applications like wearables and sensors, bridging the gap between high-end smartphones and low-power massive IoT. Looking ahead, 5G-Advanced, formalized in Release 18 and frozen in 2024, introduces ongoing trials focused on uplink enhancements, high-mobility support for transportation, and immersive services, paving the way for broader commercialization in 2025. Emerging standards envision under the ITU's IMT-2030 framework, targeting commercial availability around 2030 with terahertz bands above 100 GHz for ultra-high speeds and integrated sensing. networks are conceptualized as AI-native, embedding directly into the protocol stack for adaptive optimization, distributed learning, and enhanced security across space-air-ground integrated systems.

Technical Mechanisms

Multiple Access Methods

Multiple access methods enable multiple users to share the limited efficiently in radio access technology (RAT) systems by allocating resources in , time, or domains to minimize interference and maximize throughput. These techniques have evolved from simple division schemes in early generations to advanced orthogonal in modern standards, balancing , complexity, and robustness against channels. Frequency Division Multiple Access (FDMA) divides the available bandwidth into non-overlapping frequency channels, each assigned to a single user or call, as employed in first-generation () analog cellular systems like AMPS. To prevent , guard bands—unused frequency portions—are inserted between channels, which reduces but ensures signal isolation in environments. This approach was foundational in early systems before hybrid methods emerged. Time Division Multiple Access (TDMA) allocates time slots within a shared carrier to different users, allowing sequential transmission and reception, and forms the core of the Global System for Mobile Communications (). In , the TDMA frame structure consists of 8 time slots per 200 kHz carrier, with each frame lasting approximately 4.615 ms, enabling up to 8 users per carrier while incorporating guard periods to mitigate timing offsets and inter-symbol interference. Code Division Multiple Access (CDMA) permits simultaneous transmission over the same and time by assigning unique orthogonal or quasi-orthogonal spreading codes to users, spreading the signal across a wider bandwidth for improved interference rejection, as utilized in third-generation () Universal Mobile Telecommunications System (). The spreading factor, ranging from 4 to 512 in , determines the code length and processing gain, enhancing capacity in multipath environments. Rake receivers exploit multipath diversity by correlating delayed signal replicas with the spreading code, combining them coherently to boost . Orthogonal Frequency Division Multiple Access (OFDMA) partitions the spectrum into orthogonal subcarriers, assigning subsets to users to combat frequency-selective fading and enable flexible , central to fourth-generation () Long-Term Evolution (LTE) and fifth-generation () (NR). In LTE, a resource block comprises 12 consecutive subcarriers over 7 OFDM symbols (for normal cyclic prefix), forming the basic scheduling unit of 180 kHz bandwidth. In , subcarrier spacing scales as Δf=15×2μ\Delta f = 15 \times 2^\mu kHz, where μ=0\mu = 0 to $4$ (15 kHz to 240 kHz), supporting diverse use cases from low-latency massive to high-mobility scenarios. Hybrid methods combine elements of these schemes for optimized performance; notably, (SC-FDMA) is adopted for LTE uplink to maintain power efficiency through lower peak-to-average power ratio (PAPR) compared to OFDMA, reducing nonlinear distortion in amplifiers while preserving frequency-domain equalization benefits.

Modulation and Spectrum Management

In radio access technologies (RAT), modulation schemes encode digital data onto radio frequency carriers by varying amplitude, phase, or both, enabling efficient transmission over wireless channels. Quadrature (QPSK) serves as a foundational scheme in early generations, offering robustness against noise with two bits per , as utilized in wideband (WCDMA) systems. In long-term evolution (LTE), higher-order schemes like 16-quadrature (QAM) and 64-QAM predominate, packing 4 to 6 bits per to boost data rates while maintaining acceptable error rates in moderate signal conditions. Fifth-generation (5G) new radio (NR) extends this progression with even higher-order constellations, including 256-QAM (8 bits per symbol) as standard and 1024-QAM (10 bits per symbol) in high environments for enhanced throughput applications, enhancing in high- () environments. These advancements allow to achieve greater throughput per unit bandwidth compared to prior generations, though they demand precise linear amplification to mitigate . Adaptive modulation and coding (AMC) dynamically selects these schemes based on real-time channel quality, such as SNR measurements, to optimize (BER) performance; for instance, lower-order QAM like QPSK is favored in low-SNR conditions to keep BER below 10^{-5}, while higher orders are employed as SNR improves, conceptually tracing a BER-SNR curve where error probability decreases exponentially with SNR for fixed modulation. Spectrum management in RAT ensures equitable and efficient allocation of finite radio frequencies, balancing licensed and unlicensed bands to support diverse services. Dynamic spectrum access (DSA) enables secondary users to opportunistically utilize underused licensed spectrum without interfering with primaries, guided by principles that involve spectrum sensing, decision, and sharing. Regulatory bodies like the (FCC) facilitate this through auctions, such as Auction 110 for the 3.45-3.55 GHz band, which raised funds while reallocating mid-band spectrum for deployment. The (3GPP) standardizes band numbering, such as Band 1 for 2100 MHz paired FDD, to harmonize global allocations and across RATs. Spectral efficiency, measured in bits per second per hertz (bits/s/Hz), quantifies how effectively RAT exploits available bandwidth; 5G NR targets exceed 30 bits/s/Hz in downlink scenarios when integrating massive multiple-input multiple-output (MIMO) with higher-order QAM, a threefold improvement over 4G LTE's typical 10 bits/s/Hz. This metric underscores the impact of modulation advancements, where massive MIMO spatially multiplexes users to amplify capacity without additional spectrum. Interference mitigation remains a core challenge, addressed through frequency reuse patterns like 1x3x3 in cellular deployments, where one site with three sectors employs three distinct frequency sets to reduce co-channel interference by up to 50% compared to universal reuse (1x1x1). Such patterns are particularly vital in dense urban networks to maintain signal quality amid spectrum scarcity.

Handover and Mobility Management

Handover and mobility management in radio access technologies ensure seamless connectivity as (UE) moves across cells or networks, minimizing service disruption through coordinated procedures defined by standards bodies like . Intra-radio access technology (intra-RAT) s maintain connectivity within the same RAT, such as GSM's hard , where the UE breaks the connection to the serving before establishing a new one with the target, relying on hopping and to reduce interruption. In CDMA systems like IS-95, soft allows the UE to simultaneously connect to multiple s using the same , combining signals at the network for diversity gain and smoother transitions during overlap regions. LTE employs a break-before-make intra-RAT via X2 or S1 interfaces, where the source prepares the target before commanding the UE to switch, achieving low interruption through rapid and data forwarding, though not fully make-before-break. Inter-RAT (IRAT) s enable switching between different s, such as from 4G LTE to , addressing vertical handover challenges like spectrum incompatibility and signaling overhead through 3GPP-specified measurement reporting and cell reselection. In IRAT scenarios, the UE measures neighboring cells during connected mode and reports events to trigger , with reselection in mode based on priority and signal quality thresholds to select the best . For example, from NR to E-UTRAN involves the UE starting physical channel (PRACH) transmission within a defined delay (D_handover = T_RRC_procedure_delay + T_interruption), where interruption time is limited to under 50 ms to meet reliability needs. Mobility management encompasses tracking UE location and state transitions, particularly in idle mode using tracking areas—groups of cells where the UE registers via non-access stratum (NAS) signaling to avoid frequent updates. In 5G NR, RRC states include RRC_IDLE for power-efficient monitoring of paging and cell reselection, RRC_CONNECTED for active data transfer with precise cell-level tracking, and RRC_INACTIVE for lightweight reconnection; location management relies on paging across tracking areas to locate idle UEs efficiently. Paging occasions are determined by discontinuous reception (DRX) cycles, with the UE monitoring specific subframes based on its identity to receive downlink notifications. Handover algorithms use event-based triggers like A3 and A5 to evaluate signal quality for timely execution. Event A3 triggers when a neighbor cell's reference signal received power (RSRP) exceeds the serving cell's by an offset (a3-Offset), preventing ping-pong effects in LTE and NR. Event A5 activates when the serving cell falls below threshold1 and a neighbor exceeds threshold2, ideal for coverage-based handovers in scenarios like cell edge transitions. In 5G URLLC, these events support latency targets below 50 ms interruption time, with enhancements like dual active protocol stack (DAPS) aiming for near-zero mobility interruption to meet ultra-reliable requirements. IRAT specifics include dual connectivity mechanisms like E-UTRA-NR Dual Connectivity (EN-DC) in non-standalone (NSA) deployments, where the UE connects to an LTE master node and NR secondary node for aggregated throughput and seamless fallback. EN-DC facilitates IRAT transitions by maintaining LTE as the anchor during NR addition or release, with fallback to LTE if NR coverage lapses, ensuring continuity via coordinated signaling over X2/S1 interfaces.

Applications and Future Directions

Current Deployments and Use Cases

In mobile broadband services, 5G fixed wireless access (FWA) has emerged as a key alternative to traditional cable infrastructure, particularly in rural and underserved areas where fiber deployment is challenging. Operators like Verizon have expanded 5G FWA to cover millions of homes, achieving over 5 million subscribers by mid-2025 and targeting rural broadband expansion through self-install options that reduce deployment costs. Similarly, Huawei has supported over 50% of global FWA network constructions, enabling high-speed connectivity in regions like South Asia and enabling rapid rollout for operators facing infrastructure limitations. For (IoT) applications, (NB-IoT) and technologies facilitate low-power, wide-area connectivity, with smart metering representing a primary for utilities monitoring in real time. By 2025, global cellular IoT connections are projected to reach 6.5 billion devices, with the LPWA subset (predominantly NB-IoT and ) supporting scalable deployments across 129 NB-IoT and 159 commercial networks worldwide as of October 2025. These technologies enable efficient data transmission for applications like remote and environmental sensors. Enterprise adoption of private 5G networks has advanced automation in industrial settings, aligning with Industry 4.0 principles through ultra-reliable low-latency communication (URLLC) for real-time machine control and robotics. Factories utilize these networks for predictive maintenance and intralogistics, with investments in private 5G projected to grow at a 41% CAGR from 2025 to 2028, driven by sectors like manufacturing. In port operations, case studies such as China's automated container terminals demonstrate URLLC's role in enabling autonomous guided vehicles and crane synchronization, reducing latency to under 1 millisecond and enhancing throughput by up to 30%. Regional variations in radio access technology deployments highlight differing priorities, with leading in scale and speed of rollout. alone surpassed 1.15 billion subscribers by August 2025, reaching 1.167 billion by September 2025 and accounting for 63.4% of its mobile users while supporting over 4.7 million base stations, fueled by state-backed infrastructure initiatives. In contrast, emphasizes sustainable spectrum policies to minimize environmental impact, with adoption focused on energy-efficient bands like the 700 MHz for broader coverage while aligning with green digital targets, achieving up to 80% coverage in leading countries like by mid-2025. Key metrics underscore these deployments' scale and efficiency: global 5G connections reached 2.4 billion in Q1 2025, growing to approximately 2.6 billion by mid-2025, with population coverage exceeding 55% worldwide as of 2025. Compared to 4G, 5G networks achieve up to 90% greater energy efficiency per bit transmitted, consuming approximately 10% of the power for equivalent volumes, which supports sustainable growth amid rising demands.

Challenges and Advancements

One of the primary challenges in radio access technology (RAT) deployment is the crunch, particularly shortages in mid-band frequencies essential for balancing coverage and capacity in networks. Mid-band between 1-6 GHz remains limited in many regions due to historical allocations and regulatory hurdles, exacerbating capacity constraints in urban areas where demand is highest. Energy efficiency poses another significant hurdle, as base stations typically consume approximately three times the power of their counterparts, driven by and higher data rates, which strain grid resources and increase operational costs. Security vulnerabilities persist, especially from legacy protocols like SS7, which enable exploits such as location tracking and call interception in networks still reliant on older during transitions. Interference management and coverage limitations further complicate RAT implementation, particularly with mmWave bands used for ultra-high-speed applications. MmWave signals suffer from short propagation ranges—often limited to 100-200 meters due to high and susceptibility to blockages from buildings or foliage—making widespread deployment challenging in non-line-of-sight environments. To address these issues, reconfigurable intelligent surfaces (RIS) have emerged as a promising solution, passively reflecting and redirecting mmWave signals to extend coverage without additional power-hungry infrastructure; field trials have demonstrated up to 2-3x coverage gains in urban setups. Advancements in and (AI/ML) are tackling dynamic challenges like beam prediction in millimeter-wave systems, where ML algorithms analyze user mobility and channel data to preemptively select optimal beams, reducing latency by 20-30% in vehicular scenarios. Integrated sensing and communication (ISAC) represents a key innovation for , enabling dual-use of radio resources for both data transmission and environmental sensing, such as radar-like detection for autonomous vehicles, thereby improving spectrum efficiency in dense networks. Explorations into quantum-secure are underway to safeguard against future threats, with post-quantum cryptography (PQC) algorithms being integrated into protocols to ensure long-term confidentiality of wireless links. Sustainability efforts in focus on green initiatives to mitigate environmental impact, including advanced sleep modes that deactivate idle components in base stations, achieving up to 20% reductions in energy use and corresponding CO2 emissions during low-traffic periods. Standardization bodies like are advancing these through Release 18 and beyond, introducing 5G-Advanced features such as AI-driven power optimization and enhanced energy-saving modes to support sustainable scaling. Looking to the future, envisions terahertz (THz) communication as a core enabler, operating in the 0.1-10 THz range to deliver terabit-per-second speeds, though it requires innovations in and materials to overcome atmospheric absorption. Efforts to mitigate the are integral, with 6G designs emphasizing affordable THz backhaul for rural connectivity, potentially bridging gaps for underserved populations through low-cost, high-capacity links.

References

  1. https://www.sciencedirect.com/topics/engineering/radio-access-technology
  2. https://www.techtarget.com/searchnetworking/definition/radio-access-network-RAN
  3. https://www.electronics-notes.com/articles/connectivity/cellular-mobile-phone/what-is-radio-access-network-ran.php
  4. https://its.ntia.gov/research/rat/radio-access-technologies
  5. https://www.igi-global.com/dictionary/radio-access-technology-rat/68835
  6. https://www.ericsson.com/en/ran
  7. https://standards.ieee.org/ieee/802.16t/10450/
  8. https://www.itu.int/en/mediacentre/backgrounders/Pages/itu-r-managing-the-radio-frequency-spectrum-for-the-world.aspx
  9. https://www.gp-digital.org/wp-content/uploads/2018/11/ITU_Explainers_spectrum.pdf
  10. https://www.everythingrf.com/community/what-is-signal-fading
  11. https://www.mobileworldlive.com/old_latest-stories/itu-approves-global-5g-radio-standards/
  12. https://www.etsi.org/deliver/etsi_ts/136300_136399/136300/16.05.00_60/ts_136300v160500p.pdf
  13. https://futurenetworks.ieee.org/images/files/pdf/INGR-2022-Edition/IEEE_INGR_Massive-MIMO_Chapter_2022-Edition-FINAL.pdf
  14. https://ieeexplore.ieee.org/document/9321438
  15. https://standards.ieee.org/ieee/802.15.4/11041/
  16. https://ieeexplore.ieee.org/iel8/6287639/10380310/10620194.pdf
  17. https://ieeexplore.ieee.org/document/8042949
  18. https://spectrum.ieee.org/decoding-5g-new-radio
  19. https://people.math.harvard.edu/~ctm/home/text/others/shannon/entropy/entropy.pdf
  20. https://standards.ieee.org/beyond-standards/how-open-radio-access-network-open-ran-will-innovate-mobile-networks/
  21. https://ieeexplore.ieee.org/iel7/6287639/9668973/09798822.pdf
  22. https://www.ericsson.com/en/about-us/history/changing-the-world/world-leadership/third-american-victory
  23. https://ieeexplore.ieee.org/document/5560579
  24. https://www.ericsson.com/en/about-us/history/changing-the-world/the-nordics-take-charge/the-launch-of-nmt
  25. https://www.ericsson.com/en/about-us/history/changing-the-world/changing-the-world/milestones-1
  26. https://www.fcc.gov/auctions-summary
  27. https://wireless.fcc.gov/auctions/data/papersAndStudies/fc970353.pdf
  28. https://www.ericsson.com/en/about-us/history/company/timeline-placeholder/timeline-1991-gsm-changes-everything
  29. https://dazeinfo.com/2015/05/27/internet-mobile-phone-users-worldwide-2000-2015-report/
  30. https://www.qualcomm.com/news/onq/2010/04/3g-has-reached-1-billion-subscribers-what-can-we-expect-going-forward
  31. https://www.ericsson.com/en/about-us/history/company/timeline-placeholder/timeline-2010-4g-arrives
  32. https://www.gsma.com/mobileeconomy/wp-content/uploads/2024/07/2407-Mobile-Economy-2024.pdf
  33. https://www.gsma.com/solutions-and-impact/connectivity-for-good/mobile-economy/
  34. https://www.gsma.com/about-us/who-we-are/our-history/
  35. https://sites.pitt.edu/~dtipper/2720/2720_Slides9.pdf
  36. http://www.cwins.wpi.edu/publications/pown/chapter_8.pdf
  37. https://www.electronics-notes.com/articles/connectivity/2g-gsm-edge/what-is-gsm-edge-evolution.php
  38. https://www.etsi.org/technologies/mobile/2g
  39. https://www.exam-labs.com/blog/understanding-gsm-the-global-standard-for-mobile-communications
  40. https://teqresearch.com/global-system-for-mobile-communication-gsm-in-2g-cellular-standard/
  41. https://smsmedia.wordpress.com/2009/10/05/did-you-know-facts-about-sms-usage-in-the-world/
  42. https://www.spiceworks.com/tech/networking/articles/gsm-vs-cdma/
  43. https://eureka.patsnap.com/blog/cdma-vs-gsm/
  44. https://www.qualcomm.com/news/releases/1998/02/qualcomm-announces-results-major-economic-study-gsm-cdma
  45. https://www.3gpp.org/ftp/pcg/pcg_15/docs/pdf/PCG15_22.pdf
  46. https://www.itu.int/ITU-D/tech/events/2006/yaounde2006/presentations/yaounde_presentation_jpbienaime1_2.pdf
  47. https://www.qualcomm.com/media/documents/files/hspa-is-here-what-s-next.pdf
  48. https://www.itu.int/net/pressoffice/press_releases/2010/39.aspx
  49. https://www.itu.int/en/ITU-D/Technology/Documents/Events2013/RegionalForumIMT_ARB_Tunis_May2013/Presentations/RegForumIMT_2013_ARB_Tunis_May13_Presentation_AAlRadhi_2.pdf
  50. https://www.itu.int/ITU-D/treg/Events/Seminars/GSR/GSR12/documents/GSR12_SpectrumPolicy_Horton_2.pdf
  51. https://www.3gpp.org/ftp/information/presentations/presentations_2010/2010_05_Moscow/RAN_Progress_Nakamura.pdf
  52. https://www.3gpp.org/images/PDF/lte_advanced_SAI_paper.pdf
  53. https://www.3gpp.org/technologies/101-carrier-aggregation-explained
  54. https://www.3gpp.org/ftp/information/presentations/presentations_2010/2010_06_Latin_America/3GPP%2520RAN_3GPP%2520seminar%2520in%2520Miami_rev4.pdf
  55. https://www.3gpp.org/ftp/inbox/marcoms/ICT_6_1-2.pdf
  56. https://www.ericsson.com/en/reports-and-papers/mobility-report/dataforecasts/mobile-traffic-forecast
  57. https://www.3gpp.org/news-events/partner-news/4ga-lte-networks
  58. https://www.3gpp.org/technologies/son
  59. https://www.ericsson.com/en/press-releases/2021/11/ericsson-mobility-report-mobile-data-traffic-increased-almost-300-fold-over-10-years
  60. https://www.3gpp.org/technologies/5g-system-overview
  61. https://www.itu.int/en/mediacentre/Pages/PR-2024-11-27-facts-and-figures.aspx
  62. https://www.ericsson.com/en/reports-and-papers/mobility-report
  63. https://www.mathworks.com/content/dam/mathworks/mathworks-dot-com/images/responsive/supporting/campaigns/offers/5g-beam-management-white-paper/5g-beam-management-white-paper.pdf
  64. https://www.3gpp.org/technologies/slice-management
  65. https://www.5gamericas.org/wp-content/uploads/2020/01/5G-Evolution-3GPP-R16-R17-FINAL.pdf
  66. https://www.3gpp.org/technologies/nr-redcap-glimpse
  67. https://www.gsma.com/solutions-and-impact/technologies/networks/5g-network-technologies-and-solutions/5g-advanced/
  68. https://digitalregulation.org/overview-of-6g-imt-2030/
  69. https://www.etsi.org/deliver/etsi_ts/138200_138299/138211/18.00.00_60/ts_138211v180000p.pdf
  70. https://www.nature.com/articles/s41598-025-16743-6
  71. https://www.cs.yale.edu/homes/yry/readings/wireless/wireless_readings/adaptive_taek.pdf
  72. https://www.etsi.org/deliver/etsi_tr/137900_137999/137910/17.00.00_60/tr_137910v170000p.pdf
  73. https://enac.hal.science/hal-00938517/document
  74. https://www.arib.or.jp/english/html/overview/doc/STD-T63V12_00/5_Appendix/Rel13/21/21905-d00.pdf
  75. https://www.pearsonhighered.com/assets/samplechapter/0/1/3/0/0130871125.pdf
  76. https://www.etsi.org/deliver/etsi_ts/136300_136399/136300/13.07.00_60/ts_136300v130700p.pdf
  77. https://www.etsi.org/deliver/etsi_ts/138100_138199/138133/15.02.00_60/ts_138133v150200p.pdf
  78. https://www.etsi.org/deliver/etsi_ts/138300_138399/138304/15.01.00_60/ts_138304v150100p.pdf
  79. https://www.etsi.org/deliver/etsi_ts/136300_136399/136331/17.08.00_60/ts_136331v170800p.pdf
  80. https://ieeexplore.ieee.org/document/8329622
  81. https://www.etsi.org/deliver/etsi_ts/137300_137399/137340/16.10.00_60/ts_137340v161000p.pdf
  82. https://wia.org/over-13-million-homes-and-counting-maximizing-the-promise-of-5g-home-internet-service-with-smart-policies/
  83. https://telecomreview.com/articles/reports-and-coverage/8988-the-5g-fwa-revolution-driving-smart-home-and-business-growth/
  84. https://www.samenacouncil.org/samena_elite/jan-may2025/SAMENA_ELITE-Jan_May_2025.pdf
  85. https://www.ericsson.com/en/reports-and-papers/white-papers/cellular-networks-for-massive-iot--enabling-low-power-wide-area-applications
  86. https://www.telit.com/blog/nb-iot-lte-m-cellular-iot-for-5g-world/
  87. https://iot-analytics.com/number-connected-iot-devices/
  88. https://www.gsma.com/solutions-and-impact/technologies/internet-of-things/mobile-iot-commercial-launches/
  89. https://www.juniperresearch.com/research/telecoms-connectivity/network-connectivity/cellular-iot-strategies-research-report/
  90. https://www.snstelecom.com/private5g
  91. https://www.ericsson.com/en/reports-and-papers/white-papers/5g-spectrum-for-local-industrial-networks
  92. https://wavesight.com/blog/the-future-of-industrial-connectivity-why-private-5g-matters/
  93. http://www.ecns.cn/m/news/society/2025-09-26/detail-ihevnqwe9223562.shtml
  94. https://www.facebook.com/ChineseEmbassyinUS/posts/chinas-5g-network-keeps-expanding-by-september-2025-china-hasbuilt-4705-mln-5g-b/1154631910175757/
  95. https://www.gsma.com/newsroom/press-release/digital-infrastructure-investments-are-key-to-boosting-europes-global-competitiveness-according-to-new-gsma-report/
  96. https://www.opensignal.com/2025/09/30/5g-global-awards-2025/dt
  97. https://www.ericsson.com/en/reports-and-papers/mobility-report/dataforecasts/network-coverage
  98. https://www.viavisolutions.com/en-us/resources/learning-center/what-5g-energy-consumption
  99. https://www.5gamericas.org/north-america-sets-global-pace-as-5g-growth-hits-2-6-billion-connections-worldwide/
  100. https://www.5gamericas.org/wp-content/uploads/2020/12/InDesign-Understanding-mmWave-for-5G-Networks.pdf
  101. https://www.edn.com/understanding-the-challenges-of-5g-mmwave/
  102. https://ieeexplore.ieee.org/document/10373827
  103. https://pure.qub.ac.uk/files/606396227/IEEE-IOTJ-ISAC-F.pdf
  104. https://hellofuture.orange.com/en/5g-energy-efficiency-by-design/
  105. https://www.comsoc.org/publications/magazines/ieee-wireless-communications/cfp/terahertz-communications-and-sensing-6g-and
  106. https://news.northeastern.edu/2023/01/03/6g-network-wireless-terahertz/
Add your contribution
Related Hubs
User Avatar
No comments yet.