Hubbry Logo
search
logo
SSh-36 avatar
SSh-36
SSh-36
current hub
2628413

SSh-36

logo
Community Hub0 Subscribers
Read side by side
SSh-36
View on Wikipedia
from Wikipedia

The SSh-36 (Russian: СШ-36, from стальной шлем, stal'noy shlem, lit. 'steel helmet') was a steel combat helmet developed and used by the Red Army. It was designed by Aleksandr A. Shvartz with production started in 1936. Its large front rim and wide flares over the ears provided good protection for the wearer.

Key Information

History

[edit]

The development of a new standard steel helmet began in the 1920s. After tests and trials, this helmet was officially adopted by the Red Army in December 1935 under the name "Red Army Helmet Model 1935" ("красноармейский шлем образца 1935 года"). It was because of the introduction of the steel helmet that changes were made to the uniform of military personnel - and the field service cap was introduced as standard headgear.[2] After the helmets began to be issued to the troops in 1936, they began to be known by their short abbreviated name (SSh-36).

The SSh-36 was worn by Soviet soldiers in several campaigns of the late 1930s and 1940s, including the Khalkin Gol campaign against the Japanese in 1939 (giving it the nickname "Khalkingolka"),[3] the Finnish Winter War of 1939–1940, the 1939 invasion of Poland, the 1940 invasions of the Baltic states and Bessarabia, and in the Great Patriotic War 1941-1945.

It was also distributed to the Republican soldiers of the Spanish Civil War in conjunction with Soviet support of the Spanish government[citation needed].

However, during its use, a significant number of design flaws were revealed. The wide brim was said to create wind resistance while running and made it difficult for a soldier to move and the large visor was said to reduce visibility. It was for these and other reasons that work began in 1939 on the next helmet, which was later named the SSh-39 and the SSh-40,[4] both the 39 and 40 were practically the same, but had minor differences in the liner. Beginning in 1940, the Red Army gradually attempted to stop issuing any more SSh-36s, but the beginning of the Soviet Union's involvement in the Second World War postponed this replacement, as a result of which the SSh-36 was issued alongside the SSh-40 by Soviet soldiers until about 1943.

Production of the SSh-36 ended in 1941.

Design

[edit]

The SSh-36 was also fitted with a comb on top, which allowed for ventilation. There were also apocryphal claims that the comb was designed to deflect saber blows.

Early SSh-36s were made with fragile leather linings. Due to the unreliability of these early liners, later variations were introduced with cloth linings. Similar problems were also encountered with early leather chinstraps, so the leather chinstraps were phased out in favor of cloth models as well. Throughout their production four sizes were produced: small, medium, large, and extra large.

The design of the SSh-36 lead to the creation of the SSh-39 and SSh-40 helmets.[1]

Users

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

SSh-36

View on Grokipedia
from Grokipedia
The SSh-36 (Стальной шлем образца 1936 года, "steel helmet model of 1936") was the first domestically designed and mass-produced combat helmet adopted by the Red Army of the Soviet Union in 1936, replacing imported French Adrian helmets from the 1920s and early 1930s.[1] Constructed from steel with a semi-spherical shell, it featured a protruding crest along the top to cover a ventilation hole, sloped pentagonal sides for visibility, and an olive drab or khaki paint finish often marked with a red five-pointed star on the front.[1][2] Designed by Soviet engineer Aleksandr A. Shvartz and inspired partly by foreign models like the German Stahlhelm, the SSh-36 entered production in 1936 and continued until 1939, when it was succeeded by the improved SSh-39 model.[2] Available in four sizes to fit head circumferences up to approximately 61 cm, it included a cotton liner and leather chin strap for wearability, though early markings inside the shell indicated factory, size, and production lot via ink stamps.[2][1] The helmet saw its first combat deployment with Soviet volunteer forces supporting Republican Spain during the Spanish Civil War (1936–1939), followed by use in the Battles of Lake Khasan (1938), Khalkhin Gol (1939), and the Winter War against Finland (1939–1940).[2][1] It remained in limited service during the early phases of World War II, including the 1939 invasion of eastern Poland and the initial stages of Operation Barbarossa, with archaeological finds confirming its presence on battlefields like those near Stalingrad.[1][3] Despite its pioneering role, the SSh-36 revealed significant design and material shortcomings by late 1936, including brittle steel prone to cracking, inadequate ballistic protection near structural bends, excessive weight causing a "sail effect" in wind, and obstructed peripheral vision due to the prominent crest and brim.[3][1] These issues prompted rapid iterations in Soviet helmet development, leading to its phased replacement, though it symbolized the Red Army's early efforts toward self-sufficiency in military equipment during the interwar period.[3]

History

Development

Prior to the introduction of the SSh-36, the Red Army relied heavily on imported French Adrian helmets from the 1920s through the early 1930s, which had originally been supplied to Russian forces during World War I and later modified with Soviet red star badges after the Bolshevik Revolution.[4][1] These helmets, along with a domestically produced variant known as the M16, proved inadequate for the Red Army's expanding needs, prompting a push for a self-sufficient national design amid the Soviet Union's rapid industrialization efforts in the 1930s to modernize its military equipment.[4][1] The SSh-36 was designed in 1935 by Senior Lieutenant Aleksandr Abramovich Shvartz of the Red Army's Department of Supply, who had previously developed several experimental helmet prototypes in the early 1930s featuring a "Germanic" silhouette with basic liner systems that informed the final model.[5] While the design bore visual resemblances to the German M35 Stahlhelm in its overall contour and protective flares, Shvartz incorporated unique Soviet adaptations, such as simplified stamping techniques suited for large-scale industrial production at facilities like the Lysvensky Metallurgical Plant.[5][6] Development in 1935 led to adoption by the Red Army (RKKA) in 1936 following testing of prototypes for protective efficacy and wearability.[3] Early prototypes revealed balance issues, particularly a "sail effect" from the wide side flares that affected stability in motion, alongside concerns over obstructed peripheral vision from the prominent brim.[1] Initial modifications addressed these by refining the shell's proportions and ventilation comb prior to mass issuance, though some material brittleness persisted into early production runs.[3][1] These adjustments laid the groundwork for subsequent iterations like the SSh-39.[3]

Production and Adoption

Production of the SSh-36 steel helmet commenced in 1935–1936 at the Lysva Metallurgical Plant (LMZ), representing the Soviet Union's first domestically mass-produced combat helmet to replace imported models like the French Adrian.[6] Designed by Aleksandr A. Shvartz, it was made from approximately 1.1 mm thick steel that posed manufacturing challenges due to its brittleness and reduced ballistic resistance in curved areas.[3][6] These material limitations, exacerbated by wartime shortages of alloying elements after 1941, contributed to ongoing quality issues during output.[3] By the end of 1936, the SSh-36 had achieved full adoption within the Red Army, with widespread distribution to units by 1938 as part of standardized uniform issuance.[3] Production continued until 1941, though it was largely replaced by the SSh-39 from 1939 onward and phased out in favor of the SSh-40 due to design shortcomings and the need for higher-volume manufacturing amid escalating conflicts.[2] Logistical integration emphasized cost-effective stamping processes, though exact per-unit costs remain undocumented in available records; disruptions from the German invasion further strained output at facilities like Lysva.[3]

Design

Construction and Specifications

The SSh-36 helmet was constructed from 1.1 mm-thick steel, providing a balance of durability and reduced weight compared to earlier designs.[6] Its overall weight ranged from 1,200 to 1,300 grams, varying by size to accommodate different users while maintaining portability.[6] The helmet featured a hemispherical shell with a large protruding front brim for enhanced face protection and wide side flares over the ears to shield against lateral impacts.[6] It was produced in four sizes to fit head circumferences typically from 54 to 61 cm, with the internal leather or fabric liner (known as a comforter) adjustable across eight sub-sizes for precise fit.[7] The liner was affixed to an aluminum strip and secured by three rivets, absorbing shocks and facilitating air circulation.[6] A leather or tarpaulin chin strap with square buckles ensured secure attachment, while a riveted comb on the crown covered a central ventilation hole to promote airflow without compromising the shell's integrity.[6] Protective features emphasized defense against low-velocity threats, with the helmet's design intended to deflect falling debris and shrapnel fragments common in artillery-heavy environments.[8] The extended brim and ear flares contributed to broader coverage for the face and sides, though the thin steel limited resistance to high-velocity projectiles.[6]

Markings and Accessories

The SSh-36 helmet featured a standard paint scheme consisting of a dark green or khaki base color applied to the exterior for basic field camouflage, providing moderate concealment in varied terrains typical of Soviet operational environments.[1][2] On the forehead, early production models (1936 onward) bore a red-painted five-pointed star outline as the primary identification marking, symbolizing Red Army affiliation; some variants included a hammer-and-sickle emblem within the star.[1][2] Markings evolved over production, transitioning from thin-line stars with an internal hammer-and-sickle motif in early batches to thicker outlines without the emblem in later runs.[2] Not all helmets received these external decorations, with some issued unpainted or starless for rapid deployment. Internally, cold-stamped factory indicators (such as codes for producers like LMZ in Leningrad) appeared near the rear edge, often misaligned in 1936–1937 examples, alongside size notations (e.g., "2 POCT" for medium fit) and production year stamps.[1][2] Black ink acceptance stamps supplemented these, detailing the factory, lot number, size, and year (e.g., 1938 for size 4), applied post-inspection to verify compliance.[9] Accessories for the SSh-36 were limited but practical, including leather or tarpaulin chin straps with steel buckles for secure fit, often reinforced for durability.[6] Winter padding, known as a "comforter," consisted of fabric or leather liners attached to an aluminum strip, available to adjust for colder climates and sized to match helmet variants (53–60 cm head circumference).[6] Optional camouflage covers, typically netting or fabric overlays in disruptive patterns, could be fitted over the helmet for enhanced concealment in specific theaters, though not standard issue.[6]

Use

In Soviet Service

The SSh-36 saw early combat use by Soviet volunteer forces in the Spanish Civil War (1936–1939), followed by the Battles of Lake Khasan against Japanese forces in 1938.[1] It entered wider Red Army service during the Battles of Khalkhin Gol against Japanese forces from May to September 1939.[2] It continued in service through the Soviet invasion of eastern Poland in September 1939, the Winter War with Finland from November 1939 to March 1940, where Soviet troops relied on it amid harsh winter conditions, and the initial phases of Operation Barbarossa in June 1941, with widespread use among infantry units facing German invasion forces.[1][2][10] Throughout World War II, the SSh-36 was issued as standard headgear to Red Army infantry until 1942, with pre-war production from 1936 to 1939 enabling mass distribution to frontline troops. Archaeological finds have confirmed its presence on battlefields like those near Stalingrad (Kalach-on-Don) during 1942.[1] However, soldiers frequently complained about its design flaws, including the wide ear flares that created a "sail effect" in high winds, hindering movement, and the large brim that reduced peripheral vision and obstructed sightlines.[1] These limitations were particularly evident in open terrains like those of Khalkhin Gol and during mobile operations early in the German invasion. The helmet offered basic protection against shrapnel fragments, proving useful in urban combat scenarios where indirect fire was common, though accounts highlighted its vulnerability to direct hits from bullets or heavier ordnance, with overall protective qualities deemed insufficient.[1] Replacement began gradually with the introduction of the improved SSh-39 in June 1939, which addressed many of the SSh-36's shortcomings, followed by the SSh-40 in 1940 that became the primary wartime model.[3] By 1942, the SSh-36 was fully phased out of active service, concluding its operational lifespan from 1936 to 1942.[11]

International Users

The SSh-36 helmet saw its primary international deployment during the Spanish Civil War (1936–1939), where the Soviet Union provided substantial military aid to the Republican government against Nationalist forces. As part of this support, thousands of SSh-36 helmets were supplied to Republican troops, marking the helmet's first combat use outside Soviet borders.[2][6] These helmets were widely adopted by Republican infantry units, including the International Brigades—volunteer formations composed of foreign antifascist fighters from various countries who integrated into the Republican army. Soviet-supplied SSh-36s equipped these brigades alongside other Republican soldiers, providing basic head protection in intense urban and frontline battles such as those at Madrid and the Ebro River.[12][13] Republican forces often adapted the helmets for local use, adding Spanish markings or emblems to distinguish units; for instance, some SSh-36s bore the insignia of the Republican Medical Corps, applied directly to the shell. Other modifications included repainting in Republican colors or overpainting Soviet stars to align with Spanish iconography, though the core design remained unchanged. No major structural variants were developed abroad, but these cosmetic alterations facilitated integration into mixed-equipment inventories.[14] Beyond Spain, documented foreign use was minimal. Limited instances of SSh-36 adoption appeared among Soviet allies post-World War II, such as occasional wear by Mongolian People's Army officers in the early 1960s, reflecting surplus distribution rather than standard issue. Reports of small quantities reaching Eastern Bloc nations like Poland or China via postwar aid remain unverified, with no evidence of widespread adoption or production there; later Soviet helmets like the SSh-40 dominated such transfers instead. Overall export volumes were low, primarily for the Spanish aid program.[15]
User Avatar
No comments yet.