Hubbry Logo
SubframeSubframeMain
Open search
Subframe
Community hub
Subframe
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Subframe
Subframe
Subframe
View on Wikipedia
from Wikipedia
The Lamborghini Aventador has a carbon fibre central monocoque, with front and rear steel subframes, mounting the mechanics.
Front subframe of a Vauxhall Vectra on display in Bedford Museum

A subframe is a structural component of a vehicle, such as an automobile or an aircraft, that uses a discrete, separate structure within a larger body-on-frame or unibody to carry specific components like the powertrain, drivetrain, and suspension. The subframe is typically bolted or welded to the vehicle. When bolted, it often includes rubber bushings or springs to dampen vibrations.[1][2][3]

The primary purposes of using a subframe are to distribute high chassis loads over a wide area of relatively thin sheet metal of a monocoque body shell and to isolate vibrations and harshness from the rest of the body. For example, in an automobile with its powertrain contained in a subframe, forces generated by the engine and transmission can be sufficiently damped to prevent disturbing the passengers. Modern vehicles use separate front and rear subframes to reduce overall weight and cost while maintaining structural integrity. Additionally, subframes benefit production by allowing subassemblies to be created and later introduced to the main body shell on an automated line.

There are generally three basic forms of the subframe:

  1. A simple "axle" type, which usually supports the lower control arms and steering rack.
  2. A perimeter frame, which supports the lower control arms, steering rack, and engine.
  3. A perimeter frame with full support, which supports the lower control arms, steering rack, engine, transmission, and possibly the full suspension, commonly used in front-wheel-drive cars.

Subframes are typically made of pressed steel panels that are thicker than body shell panels and are welded or spot-welded together. Hydroformed tubes may also be used in some designs.

The revolutionary monocoque, transverse-engined, front-wheel-drive 1959 Austin Mini set the template for modern front-wheel-drive cars by using front and rear subframes to provide accurate road wheel control while maintaining a stiff, lightweight body. The 1961 Jaguar E-Type (XKE) used a tubular space frame–type front subframe to mount the engine, gearbox, and long bonnet/hood to a monocoque "tub" passenger compartment. Beginning with the 1960s, subframes saw regular production with General Motors' X- and F-platform bodies, and the Astro/Safari mid-size vans.

Subframes are prone to misalignment, which can cause vibration and alignment issues in the suspension and steering components. Misalignment is caused by space between the mounting bolts and the mounting hole. Several companies in the automotive aftermarket, including TyrolSport in the US and Spoon Sports in Japan, offer solutions for subframe misalignment and movement issues.

Rear subframe and suspension of a 1963 Jaguar E-Type
Underbody with front and rear subframes of a 2011 Ford Focus

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Subframe

View on Grokipedia
from Grokipedia
A subframe is a structural component in automobiles that mounts and supports the suspension, (including the or and transmission), and systems, playing a critical role in vehicle stability, ride quality, and . These components are typically integrated into unibody designs, where they serve as partial frames distinct from the main , and are most commonly found in front-wheel-drive configurations. Subframes are classified by location and function, including front subframes (often called engine cradles or K-frames) that support the and front suspension, and rear subframes that bolster the rear and suspension. They manage various dynamic loads from road conditions, cornering, acceleration, braking, and impacts, while in electric vehicles, they additionally provide crash protection for battery packs, as seen in models like the . Traditionally constructed from high-strength for durability, modern subframes increasingly utilize aluminum alloys (such as 6061 or 6063) or hybrid materials like composites and plastics to reduce by up to 35%, improve , and enhance resistance without compromising torsional or flexural . This shift supports lower costs through processes and facilitates easier assembly in production lines. Common challenges with subframes include from exposure to road salt and , as well as damage from collisions or wear, which can lead to alignment issues, , or compromised handling if not addressed through repair or replacement. Regular inspections during maintenance are recommended, particularly in regions with harsh winters, to ensure structural integrity.

Overview

Definition

A subframe is a rigid, separate structural component that is bolted or welded to a vehicle's main body or frame, designed to mount and support the powertrain, suspension, steering, and related assemblies. Key characteristics of a subframe include its typically smaller and more localized design compared to a full ladder frame, as well as its application in both and unibody architectures to isolate and manage specific mechanical loads. It differs from a "cradle," which is a specialized variant of a subframe primarily focused on and mounting.

Purpose and Functions

Subframes in automotive vehicles primarily serve to distribute high local loads across a wider area of the , preventing stress concentrations in body structures that would otherwise compromise structural integrity. This load-bearing function is essential for supporting the weight of the , transmission, and differential components, ensuring even force transmission to the main frame during dynamic operations like and cornering. Additionally, subframes facilitate modular assembly in by allowing pre-assembly of suspension and elements as independent units, which can then be bolted or welded to the body, streamlining production processes and enabling automation. A key mechanical benefit of subframes is their role in vibration and noise isolation, achieved through rubber bushings or mounts that dampen road-induced harshness and vibrations before they reach the compartment. These isolators provide a double isolation effect, mitigating both road and auxiliary device vibrations while maintaining structural compliance. Subframes also enhance suspension geometry alignment by serving as a rigid mounting platform for control arms, ensuring precise positioning that optimizes handling and stability under varying loads. In crash scenarios, particularly frontal impacts, the subframe acts as a deformable zone that absorbs and manages energy, contributing to overall vehicle safety by directing forces away from critical areas. Subframes integrate seamlessly with key vehicle systems to bolster performance and durability, interfacing directly with steering racks for accurate directional control and control arms for responsive suspension dynamics. Overall, these integrations promote enhanced vehicle stability, ride quality, and longevity by unifying disparate components into a cohesive structural network.

Design and Types

Structural Classifications

Subframes in are classified structurally based on their geometry and the scope of components they support, ranging from minimal axle-focused designs to comprehensive integrated units. These classifications—axle-type, perimeter frame, and full-support (or cradle)—reflect variations in load distribution, complexity, and integration with the vehicle's , influencing overall rigidity and assembly efficiency. The -type subframe represents the simplest structural form, consisting of a basic cross-member or beam that primarily supports the lower control arms and steering rack. This design focuses on and suspension attachment points, providing targeted reinforcement without enclosing broader areas of the . It is typically employed for rear axles in lightweight vehicles, where minimal weight and cost are prioritized over extensive integration. In contrast, the perimeter frame subframe adopts a boxed or channel-shaped configuration that encircles the engine bay, offering a more expansive support structure. This accommodates control arms, components, and portions of the , such as the and transmission mounts, while distributing loads across a wider perimeter to enhance stability. The design's enclosed shape contributes to improved torsional resistance compared to simpler forms, though it requires more material and fabrication steps. The full-support, or cradle, subframe provides the most comprehensive , functioning as a self-contained module that mounts the , transmission, and entire suspension assembly. Often featuring integrated cross-members and side rails, this type isolates vibrations and aligns components precisely during assembly. It is common in front-wheel-drive layouts, where centralized and suspension mounting simplifies manufacturing and improves (NVH) performance. Comparatively, these classifications differ significantly in rigidity and mounting points. Axle-type subframes offer basic flexural through localized reinforcements but have fewer integrated mounts, relying on bolts for attachment. Perimeter frames increase rigidity via their surrounding , supporting multiple bushings and brackets for distributed loads. Full-support cradles achieve the highest torsional and modal by consolidating numerous mounting points into a single unit, reducing part count and enhancing load paths. These differences allow designers to balance weight, cost, and performance based on application needs.

Front and Rear Variations

Front subframes in vehicles are characterized by greater structural complexity compared to their rear counterparts, primarily due to the need to integrate with the engine cradle and support multiple front-end systems. These subframes provide essential mounting points for components such as the steering gear, front lower control arms (often referred to as A-arms), and stabilizer bars (sway bars), which contribute to precise handling and suspension . Additionally, they incorporate energy-absorbing features, such as front horns, to manage crash forces effectively during frontal impacts. In some designs, front subframes utilize advanced forming techniques like folded sheet-metal constructions to achieve lightweight rigidity while accommodating attachments for anti-roll bars and control arms. This complexity arises from the subframe's role in isolating vibrations from the and ensuring compatibility with diverse engine layouts, often resulting in multi-part assemblies that reduce the number of individual components for manufacturing efficiency. Rear subframes, by contrast, adopt simpler, more axle-centric architectures tailored to support the and suspension at the vehicle's rear. They typically include provisions for trailing arms, shock absorbers, and sometimes the , forming a modular unit that bolts to the body via rubber bushings to dampen road inputs. A key design priority for rear subframes is maximizing torsional rigidity, which enhances cornering stability and load distribution during acceleration and braking. The positional differences lead to distinct trade-offs in subframe engineering: front designs emphasize balanced to optimize response and front-wheel traction, often at the expense of added complexity from integration, whereas rear designs prioritize traction enhancement and through streamlined structures that minimize unsprung mass. Subframes in either position may employ perimeter or full-support configurations to align with these goals.

Materials and Manufacturing

Common Materials

Subframes in vehicles have traditionally been constructed from high-strength low-alloy (HSLA) , which offers a favorable balance of tensile strength typically 300-700 MPa (with advanced grades up to 950 MPa), cost-effectiveness, and formability for structural applications like components. These steels typically feature thicknesses of 3-6 mm to provide adequate rigidity while minimizing weight, making them suitable for withstanding vehicle loads and vibrations. In pursuit of weight reduction to improve and handling, modern subframes increasingly incorporate aluminum alloys, such as cast or extruded 6061-T6, which achieve 30-50% lower compared to equivalent designs without compromising essential strength. Magnesium alloys represent another lightweight option, primarily in high-end or prototype vehicles, where their low enables further savings in components like front subframes for sedans. Composite materials, such as carbon fiber reinforced polymers, are explored in prototypes to replace parts, offering potential for even greater weight reductions and part consolidation. Material selection for subframes prioritizes corrosion resistance, often achieved through galvanized coatings on to protect against ; fatigue strength to endure cyclic loading from road conditions; and compatibility with joining methods like for or bolting for aluminum to ensure structural integrity. Recent advancements as of 2025 include the adoption of integrated die-casting techniques for aluminum subframes in electric vehicles, such as Tesla's rear subframe for the Model Y, which achieves approximately 30-40% weight reduction compared to equivalents while consolidating parts for cost efficiency. Additionally, advanced high-strength steels (AHSS), building on HSLA, are increasingly used for enhanced crash energy absorption in EV battery protection structures.

Production Techniques

Subframes are commonly produced through stamping and processes, particularly for components in high-volume automotive . sheets are pressed into shaped panels using progressive die stamping, followed by assembly via resistance , which joins multiple panels efficiently with minimal heat distortion. This method is widely adopted for its cost-effectiveness and scalability in producing robust, load-bearing structures like front and rear subframes. Hydroforming represents an advanced technique for fabricating subframes, especially those requiring complex geometries from tubes. In this , high-pressure expands the tubes against a die to form seamless, lightweight shapes, often reducing the number of welds by approximately 50% compared to traditional stamped assemblies while enhancing structural strength through uniform material distribution. This approach improves precision and reduces part count, making it suitable for modern designs prioritizing weight reduction without compromising rigidity. For aluminum subframes, die-casting is frequently employed to create intricate cradles and nodes, where molten aluminum alloys, such as Al-Si series, are injected under high pressure into reusable molds to form dense, high-strength components. Subsequent refines these castings, ensuring precise tolerances at mounting points for and suspension integration. This combination allows for lightweighting—aluminum subframes can be up to 40% lighter than equivalents—while maintaining the necessary mechanical properties for automotive applications. Quality control in subframe production is critical to ensure structural , relying on non-destructive testing methods such as ultrasonic inspection to detect internal defects like cracks or voids in welds and castings without compromising the component. Ultrasonic waves are transmitted through the material to identify flaws based on echo patterns, while dimensional accuracy is verified using coordinate measuring machines. These techniques guarantee compliance with automotive standards, minimizing failure risks in high-stress environments.

Historical Development

Early Innovations

The emergence of subframes in automotive design during the mid-20th century was motivated by post-World War II economic and resource constraints, which emphasized the need for lighter, more fuel-efficient chassis to meet growing demands for affordable transportation. As unibody construction gained traction for its weight reductions and simplified manufacturing—exemplified by early adopters like the 1948 Tucker Sedan—subframes offered a complementary approach by providing modular support for suspension and powertrain components, enabling compact layouts and easier assembly without fully abandoning integrated body structures. This innovation addressed the era's shift toward smaller vehicles amid fuel shortages, such as those triggered by the 1956 Suez Crisis. A landmark application came with the 1959 Austin Mini, the first mass-produced front-wheel-drive car to incorporate bolt-on front and rear subframes. Designed by Sir Alec Issigonis for the , the Mini's dual subframes—bolted to the unibody at eight points—housed the independent suspension systems, drastically reducing wheel well sizes to maximize interior space in a remarkably compact package while facilitating straightforward assembly-line production. This design not only enhanced packaging efficiency but also contributed to the car's legendary handling and economy, weighing just 580 kg at launch. The 1961 Jaguar E-Type further advanced subframe technology in sports cars by introducing a tubular spaceframe-style front subframe, which carried the , front suspension, steering, and forward bodywork for exceptional rigidity. Evolving from Jaguar's D-Type racing prototype, this bolted subframe integrated with a central tub and rear bulkhead-mounted suspension, achieving a structural weight reduction of approximately 225 kg compared to the predecessor XK150 while maintaining high structural integrity and minimizing vibrations through rubber isolators. The approach prioritized performance and serviceability, influencing subsequent high-end vehicle designs. Before these automotive breakthroughs, subframe-like modular structures saw rare use in pre-1950s applications outside production cars, such as aircraft undercarriages where separate frames supported retractable for maintenance and load distribution, and in early racing prototypes that employed partial spaceframes for tunable rigidity. These non-automotive precedents laid conceptual groundwork but were not adapted to mass-market vehicles until the late innovations above. For instance, the 1955 Fiat incorporated subframe elements in its unibody design to support the rear engine and suspension, marking an early European example of modular chassis components.

Widespread Adoption

The widespread adoption of subframes in automotive design began in the 1960s with General Motors' integration into its compact and intermediate platforms, marking a shift toward modular unibody construction that enhanced manufacturing efficiency and vehicle rigidity. GM introduced front and rear subframes on the X-body platform, first seen in the 1962-1967 Chevrolet Chevy II and continuing with the 1968-1974 Chevrolet Nova, where the subframes supported the suspension and powertrain while allowing for easier assembly and repair. Similarly, the F-body platform, debuting with the 1967 Chevrolet Camaro and Pontiac Firebird, employed full-perimeter subframe designs that encircled the passenger compartment, providing structural integrity comparable to full ladder frames in unibody vehicles. This approach extended to GM's van lineup in the 1980s, with the 1985 Chevrolet Astro and GMC Safari utilizing front subframes or cradles to mount the engine and suspension, facilitating body-on-frame versatility for commercial applications. By the 1970s and 1980s, European and Japanese manufacturers embraced subframes to optimize unibody efficiency amid rising fuel costs and global competition, diverging from traditional full-frame designs. During this period, luxury models continued to evolve subframe designs for performance, with later shifts toward lighter materials in the 2000s; for instance, the 2003 series featured aluminum-intensive structures including subframe components to improve ride quality and fuel economy without sacrificing strength. From the 1990s onward, subframes evolved to support advanced , particularly through integration with (ESC) systems, which required precise sensor mounting and rigid chassis points. pioneered ESC in 1995 on the S-Class, using subframes to anchor yaw sensors and brake actuators, a design trend that proliferated across platforms for better stability in cornering and evasive maneuvers. In modern electric vehicles, subframes enable modularity for battery integration; the , introduced in 2017, features a rear subframe cradle that secures the drive unit and battery pack, allowing for easier service and structural reinforcement in its gigacasting unibody. Key market drivers accelerating subframe adoption included regulatory pressures for enhanced safety and emissions compliance, alongside manufacturing advancements. Stricter crash standards from the U.S. (NHTSA) in the 1970s and beyond favored subframes for their ability to distribute impact forces, reducing intrusion in unibody designs. Emissions regulations, such as the 1970 Clean Air Act amendments, incentivized lighter subframe materials to improve without compromising durability. Additionally, just-in-time (JIT) manufacturing, popularized by Japanese automakers in the 1980s, benefited from subframes as pre-assembled modules, minimizing inventory and enabling rapid customization across global platforms.

Advantages and Challenges

Benefits in Vehicle Design

Subframes enhance vehicle modularity by enabling the pre-assembly of critical components such as powertrains and suspension systems, which can be integrated into the main body structure on automated assembly lines, thereby simplifying overall production processes and improving flexibility. This approach reduces the number of joints and parts in the assembly, as demonstrated in designs like the Panamera's aluminum subframe, which consolidates approximately 30 components into a single 16 kg casting, lowering production complexity. In terms of , subframes contribute to superior (NVH) control through isolated mounting systems, such as rubber bushings or hydraulic springs, which decouple the suspension and from the body to minimize transmitted disturbances and enhance ride comfort. They also support precise suspension alignment, improving handling and stability by providing a rigid mounting platform that maintains optimal under load, as seen in high-stiffness aluminum subframes that ensure better road contact. Subframes bolster safety by incorporating deformable zones that absorb crash during collisions, reducing intrusions into the passenger compartment; for instance, extended subframe configurations can decrease firewall intrusion by up to 59 mm in car-to-car impacts and absorb approximately 8% more compared to shortened designs. In hybrids and electric vehicles, weight-optimized subframes, such as the 18 kg aluminum rear subframe in the , achieve up to 25% mass reduction over steel equivalents, improving energy efficiency, extending range, and increasing payload capacity in applications like electric trucks. Economically, subframes facilitate platform sharing across vehicle models by standardizing modular components, which lowers tooling and development costs; aluminum variants further reduce material expenses and enable efficient part consolidation, as evidenced by the C5's 11.7 kg subframe achieving 45% weight savings while supporting broader platform adaptability.

Common Issues and Limitations

Steel subframes are particularly susceptible to from exposure to road salt and , which can lead to surface progressing to structural weakening and cracks, often in regions with harsh winters. in these components arises from repeated stress cycles under load, exacerbating corrosion-induced cracks and potentially causing suspension failure if unchecked. Aluminum subframes, while lighter, face risks of when in contact with dissimilar metals like fasteners, accelerating degradation in electrolytic environments unless isolated properly. Alignment issues frequently stem from bolt loosening or bushing wear in subframe mounts, resulting in vibrations, uneven tire wear, and handling instability as the frame shifts relative to the body. Aftermarket solutions, such as reinforced bushings or locking connectors, can address these by improving stability, though professional realignment is typically required post-installation. The incorporation of subframes introduces design complexity, with subframe weights typically ranging from 14-35 kg depending on and size for mid-size , which can impact and overall distribution. Repair costs for replacement can reach up to $1,600, encompassing labor for suspension disassembly and reassembly, making it a significant expense for owners. In collisions, subframes not optimized for energy absorption may transmit forces directly to the , heightening vulnerability to further structural damage. Modern mitigation strategies include e-coated finishes on components to provide a uniform barrier, enhancing longevity in adverse conditions. Additionally, newer models favor modular bolt-on designs, facilitating easier , repair, and replacement while reducing dependencies that could introduce fatigue points. As of 2025, advancements in subframes continue to emphasize lightweight composites for better battery integration and crash protection, as seen in recent models like the updated with reinforced aluminum structures.

Applications in Vehicles

Passenger Cars

In passenger cars, subframes play a critical role in front-wheel-drive architectures, which dominate the market due to their efficiency and packaging advantages. Full-support cradle subframes mount the engine and transmission while integrating with the front suspension, distributing loads to the body and isolating vibrations for improved ride quality. This design enhances manufacturing modularity, allowing pre-assembly of and suspension components before body integration. For instance, in compact sedans and hatchbacks like the , the front subframe provides robust support for these elements, contributing to stable handling and reduced noise transmission. Performance-oriented passenger cars, such as sports sedans, employ stiffened aluminum subframes to minimize unsprung weight and sharpen dynamic response. In the , the front axle features aluminum subframes and control arms in a double-joint spring-strut configuration, reducing unsprung mass by approximately 5 kg compared to steel equivalents, which improves suspension compliance, cornering precision, and overall agility without compromising rigidity. This material choice also aids and braking performance in high-speed applications. The shift toward electric vehicles has evolved subframe designs to incorporate battery integration, blending structural support with energy storage functions for optimized floorpan efficiency. In models like the , the pack is structurally mounted to the floor, acting as a load-bearing element that enhances torsional stiffness while housing the power source. The front-wheel-drive segment accounts for over 60% of the global automotive subframe market, underscoring the prevalence of these designs in modern passenger cars for assembly modularity and lightweighting.

Commercial and Off-Road Vehicles

In body-on-frame trucks such as the Ford F-150, perimeter rear subframes provide robust support for solid axles, enhancing structural integrity for heavy-duty applications. This design, which encircles the passenger compartment for improved side-impact protection and torsional rigidity, allows the F-150 to achieve maximum capacities of up to 13,500 pounds when properly equipped with a 3.5L . Off-road SUVs like the feature reinforced front subframes integrated with the vehicle's ladder frame to withstand extreme terrain, often augmented by heavy-duty skid plates for underbody protection. These reinforcements, typically made from 3/16-inch plating, shield critical components such as mounts and the differential while enabling greater suspension articulation during rock crawling and uneven surfaces. Commercial vans, exemplified by the , employ modular subframes in cab-chassis configurations to facilitate cargo upfitting for diverse utility needs. This design allows for straightforward attachment of service bodies, shelving, and specialized equipment, supporting applications from delivery to construction without compromising the vehicle's base structural efficiency. Recent trends in subframe design for trucks and vans incorporate hybrid reinforcements using carbon fiber composites to reduce weight while maintaining strength, thereby improving . Prototypes developed by Magna and Ford demonstrate up to a 34 percent mass reduction compared to traditional steel subframes, enabling better payload-to-fuel consumption ratios in heavy-duty vehicles.

References

  1. https://aec.org/page/subframes-engine-cradles
  2. https://www.carparts.com/blog/a-definitive-guide-to-crossmembers-frames-and-other-suspension-system-principles/
  3. https://www.marketresearchfuture.com/reports/automotive-subframe-market-23384
  4. https://www.wiseguyreports.com/reports/automotive-sub-frame-market
  5. https://www.carparts.com/blog/what-you-need-to-know-about-subframe-repair/
  6. https://taylorandfrancis.com/knowledge/Engineering_and_technology/Automotive_engineering/Subframe/
  7. https://saemobilus.sae.org/articles/a-design-optimization-process-improving-automotive-subframe-dynamic-stiffness-using-tuned-rubber-mass-damper-10-08-02-0014
  8. https://european-aluminium.eu/wp-content/uploads/2022/11/aam-applications-chassis-suspension-1-subframes.pdf
  9. https://www.sae.org/papers/a-comparative-study-cradle-sub-frame-type-powertrain-mounting-system-electric-vehicle-2021-01-1022
  10. https://www.sae.org/publications/technical-papers/content/2023-01-0005/
  11. https://vibracoustic.com/en/product/subframe-mounts/
  12. https://www.sae.org/papers/aluminum-subframe-design-crash-energy-management-2004-01-1775
  13. https://speautomotive.com/wp-content/uploads/2020/12/Carbon-Fiber-Subframe-Design-and-CAE-1.pdf
  14. https://altair.com/resource/development-of-a-new-vehicle-front-sub-frame-using-altair-inspire-topology-optimization
  15. https://www.sae.org/papers/design-a-rear-subframe-a-racing-car-2020-01-5087
  16. https://www.aaudxp-cms.aau.dk/media/ozdbkagr/design-and-optimization-of-a-subfram-structure-for-the-agile-automotive-scx-car.pdf
  17. https://masteel.co.uk/news/high-strength-low-alloy-steels-in-automotive-crash-structures/
  18. https://www.poncnc.com/news/Forming-process-and-application-status-of-aluminum-alloy-subframe-for-automobiles.html
  19. https://www.sae.org/papers/cast-magnesium-subframe-development-bolt-load-retention-2021-01-0274
  20. https://www.plasticstoday.com/automotive-mobility/carbon-fiber-composite-subframe-assembly-replaces-45-steel-parts-with-two-molded-and-four-metallic-parts
  21. https://northamerica.arcelormittal.com/media/wpagn4yr/arcelormittal_data-sheet_high-strength-low-alloy_4pg_x1a.pdf
  22. https://www.automotive-technology.com/articles/materials-used-in-chassis-and-body-components-of-the-vehicle
  23. https://www.moderncasting.com/articles/2021/05/05/casting-year-front-subframe-engine-cradle-magna
  24. https://www.fandp.com/products/automotive/subframes
  25. https://franklinfastener.com/the-importance-of-automotive-metal-stamping/
  26. https://www.schulergroup.com/major/us/technologien/produkte/grundlagen_hydroforming_frame_parts/index.html
  27. https://www.gasvessel.eu/events/metals-hydroforming-a-look-at-the-automotive-industry/
  28. https://metsuco.com/how-ndt-methods-are-critical-to-automotive-industry/
  29. https://www.salemndt.com/markets/automotive-ndt
  30. https://www.ndt.net/article/ecndt2023/papers/ECNDT2023_PAPER_279.pdf
  31. https://www.autoweek.com/car-life/classic-cars/a2148361/mini-turns-60-britains-small-car-became-big-hit/
  32. https://www.jaguarheritage.com/e-type-evolution-exhibition/
  33. https://www.classicindustries.com/shop/all-years/chevrolet/nova/parts/suspension/subframes/
  34. https://ridetech.com/product/ridetech-subframe/
  35. https://www.astrosafari.com/threads/sub-frame-question.1924/
  36. https://www.hagerty.com/media/automotive-history/from-durkopp-to-musk-the-120-year-story-of-aluminum-in-the-auto-industry/
  37. https://service.tesla.com/docs/Model3/ServiceManual/2024/en-us/GUID-D677BB2F-E525-40BA-ADB6-1C6A1A68256A.html
  38. https://www.nhtsa.gov/document/electronic-stability-control-systems-fmvss-no-126
  39. https://arkestro.com/blog/just-in-time-supply-chain-management-lessons-from-the-automotive-industry/
  40. https://publications.lib.chalmers.se/records/fulltext/150544.pdf
  41. https://www.lightmetalage.com/news/industry-news/automotive/electric-vehicle-material-selection-for-chassis-and-suspension-components/
  42. https://valleycollision.com/blog/subframe-damage-explained-the-risks-the-fixes-and-what-to-do-next/
  43. https://1stopmotorshop.com/news/46/rotten-rear-subframe-a-dangerous-structural-failure/
  44. https://www.garagejournal.com/forum/threads/subframe-bushing-alignment.191114/
  45. https://www.fixdapp.com/service/subframe/subframe-replacement-cost/
  46. https://www.chimeramotors.com/single-post/can-drive-with-bad-cracked-subframe-dangerous
  47. https://speautomotive.com/wp-content/uploads/2020/12/Carbon-Fiber-Subframe-Development-Corrision-Mitigation-Strategies-and-Test-Results.pdf
  48. https://www.lightmetalage.com/news/industry-news/automotive/aluminum-use-in-electric-vehicles-continues-to-grow/
  49. https://parts.lakelandtoyota.com/p/TOYOTA_2024_COROLLA/Suspension-Subframe-Crossmember-Front/15950168/5120102221.html
  50. https://www.press.bmwgroup.com/usa/article/detail/T0160684EN_US/the-all-new-bmw-m3-sedan-and-bmw-m4-coupe?language=en_US
  51. https://www.nissan-global.com/EN/INNOVATION/TECHNOLOGY/ARCHIVE/LI_ION_EV/
  52. https://www.curbsideclassic.com/automotive-histories/tech-history-vintage-article-the-perimeter-frame-body-and-frame-not-body-on-frame/
  53. https://www.vdm.ford.com/content/dam/brand_ford/en_us/brand/towing/pdf/2024-Ford-F-150-Towing-Guide.pdf
  54. https://www.extremeterrain.com/wrangler-skid-plates-explained.html
  55. https://barnes4wd.com/products/jk-front-frame-lower-control-arm-skidplates
  56. https://www.mbvans.com/en/upfitting
  57. https://www.foundationvehicles.com/vans
  58. https://www.automotiveworld.com/news-releases/magna-brings-carbon-fiber-composites-vehicle-structure-innovative-subframe/
  59. https://www.motortrend.com/news/magna-ford-testing-carbon-fiber-subframe-future-cars
Add your contribution
Related Hubs
User Avatar
No comments yet.