Hubbry Logo
search
logo
Toledo Complex avatar
Toledo Complex
Toledo Complex
current hub
1897888

Toledo Complex

logo
Community Hub0 Subscribers
Read side by side
Toledo Complex
View on Wikipedia
from Wikipedia

The Toledo Assembly Complex is a 312-acre (126 ha) automotive manufacturing facility in Toledo, Ohio. It currently houses a 3,640,000 sq ft (338,000 m2) factory owned by Stellantis North America. Originally established as an assembly plant by Willys-Overland in 1910, the complex has been a central hub for Jeep vehicle production since the 1940s. The site is divided into two primary facilities: Toledo North and Toledo South, with the latter encompassing the former Stickney and Parkway plants.

Key Information

Toledo South

[edit]
The original Willys-Overland factory (1915)

The Toledo South Assembly Plant is the original home of Jeep production, with roots tracing back to the Willys-Overland factory. It has been a key site for manufacturing several iconic Jeep models.

The plant began as a bicycle factory in 1904 before Willys-Overland purchased it in 1910. It became the primary production site for military Jeeps during World War II and the subsequent civilian Jeep CJ models. The facility was an amalgamation of buildings, including the "Parkway Annex" (1000 Jeep Parkway) and the "Stickney Plant" (4000 Stickney Ave). This decentralized layout required vehicle bodies to be painted at Parkway and transported via tunnels and bridges to Stickney for final assembly.

Parkway

[edit]
Smokestacks dating from 1910 at the Parkway Annex, Toledo Complex. The outer stacks were demolished in 2007

The Parkway Annex (41°40′57″N 83°33′55″W / 41.68250°N 83.56528°W / 41.68250; -83.56528 (Parkway Annex)) was opened in 1904 as a bicycle factory. Its use as an automobile assembly plant dates from 1910 when Willys-Overland purchased it. The facility became a Toledo landmark in 1915 with three prominent brick smokestacks spelling out "Overland" in bricks. The plant began producing Jeep vehicles in the 1940s.

After Chrysler acquired American Motors Corporation (AMC) in 1987, the facility was renamed the Toledo Assembly Plant. From 1993 until 2006, the Parkway plant was responsible for the basic assembly and painting of the Jeep Cherokee (XJ) and later the Jeep Wrangler (TJ), with final assembly occurring at the Stickney plant.[1]

One-third of the plant, including the Jeep museum, was demolished in 2002, and the remainder was razed in 2007, with two of the three smokestacks being removed.[2]

The site was acquired by the Toledo–Lucas County Port Authority in 2010 and redeveloped into an industrial park, which now includes a new Dana facility producing Jeep axles and a Detroit Manufacturing Systems plant.[3]

The remaining "Overland" smokestack left alone by Chrysler was preserved and dedicated as a monument in August 2013 to honor the plant's history and its workforce.[4]

Stickney

[edit]

The Stickney Plant (41°41′40″N 83°31′31″W / 41.69444°N 83.52528°W / 41.69444; -83.52528 (Stickney Plant / Toledo Supplier Park)) was opened in 1942 by Autolite and sold to Kaiser-Jeep in 1964. It was a machining and engine plant until 1981, when AMC converted it for vehicle production. The original Jeep Wagoneer (SJ) was made there from 1981 until the Grand Wagoneer model was discontinued in 1991. After that, Chrysler moved the final assembly of the Wrangler to this facility.

Chrysler also renamed this facility to Toledo Assembly Plant after the automaker acquired AMC in 1987.[5]

Toledo Supplier Park

[edit]

Both the Stickney and Parkway sites were closed in 2007 by DaimlerChrysler. The Toledo Supplier Park was developed on the Stickney site.

The "supplier park" manufacturing model involves on-site third-party suppliers. In this case, KUKA Toledo Production Operations (KTPO) operates the body shop and Mobis North America (formerly OMMC), owned by Hyundai Mobis assembles the chassis, axles, and powertrain. The Toledo Supplier Park allows for greater efficiency by having parts manufactured directly next to the final assembly line, which is operated by Stellantis North America.[6][7]

The Jeep Wrangler (JK) was produced here until 2018 when the plant was retooled to build the Jeep Gladiator (JT) pickup truck, which began shipping in 2019.

Toledo North

[edit]

The "Toledo North Assembly Plant" (41°41′46″N 83°31′10″W / 41.69611°N 83.51944°W / 41.69611; -83.51944 (Toledo North Assembly Plant)) is a modern addition to the complex on 200 acres (81 ha) at 4400 Chrysler Drive.

Construction on the 2,140,000 sq ft (199,000 m2) plant began in 1997, with the facility opening in 2001.[8] It was initially built for the production of the unibody Jeep Liberty (KJ). Production of the Dodge Nitro also began here in 2006.

The company announced a $500 million investment in 2011 to improve vehicle quality and increase capacity.[1] This included expanding the body shop, numerous upgrades to the assembly plant, and a new "Metrology Center" to improve quality by measuring vehicles to verify fit and finish.[1]

After production of the Liberty ended in 2012, the plant was retooled for the 2014 Jeep Cherokee (KL), which began production in 2013. In 2017, a $700 million investment was announced to shift Cherokee production to the Belvidere Assembly Plant in Illinois and retool Toledo North for the next-generation 2018 Jeep Wrangler (JL), launched later that year. Production of the Jeep Wrangler 4xe Plug-in Hybrid began in 2020.

Toledo Machining Plant

[edit]

In 2018, Fiat Chrysler Automobiles FCA, the predecessor of Stellantis NA, announced that the Toledo Machining Plant would assemble the power electronics module and components for the Jeep Wrangler Plug-in Hybrid launched in 2020.[9]

Vehicles produced

[edit]

Current

[edit]

Past

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Toledo Complex

View on Grokipedia
from Grokipedia
The Toledo Complex, officially known as the Toledo Assembly Complex, is a major automobile manufacturing facility located in Toledo, Ohio, owned and operated by Stellantis, where Jeep brand vehicles have been produced continuously since the 1940s. Spanning 312 acres with approximately 3.64 million square feet of manufacturing space, the complex consists of multiple plants including Toledo North, Toledo South, and the Toledo Supplier Park, employing over 4,300 workers as of October 2025 represented by United Auto Workers Local 12 and utilizing advanced automation with 616 robots.[1][2] It currently assembles iconic Jeep models such as the Wrangler (including the plug-in hybrid 4xe variant) and Gladiator pickup truck, contributing significantly to Stellantis' North American production output.[1] The site's origins trace back to 1909 when John North Willys established the Willys-Overland Motor Company in Toledo, initially focusing on automobile assembly before pivoting to military production during World War II, where it manufactured around 368,000 Jeep vehicles for the U.S. armed forces starting in 1941. Post-war, the facility introduced the first civilian Jeep, the CJ-2A, in 1945, and reached the milestone of its 5 millionth Jeep in 1954, while also pioneering models like the all-steel Jeep Station Wagon in 1946. Ownership transitioned through several entities: Kaiser-Frazer acquired Willys-Overland in 1953 for $62.3 million, followed by American Motors Corporation (AMC) purchasing Kaiser Jeep in 1969 for $70 million; Chrysler then bought AMC in 1987 for $1.5 billion, integrating the plant fully into its operations.[3] Subsequent corporate changes included the 1998 merger of Chrysler with Daimler AG, Daimler's sale of Chrysler to Cerberus Capital Management in 2007 for $7.4 billion, and Fiat's acquisition of Chrysler's assets in 2009, leading to the formation of Fiat Chrysler Automobiles (later Stellantis in 2021). Key production expansions occurred with the 1983 launch of the Jeep Cherokee at the site, the 2001 introduction of the Jeep Liberty at the newly built Toledo North plant (approved in 1997 with a $1.2 billion investment on over 560 acres), and the 2019 start of Jeep Gladiator production following a $1 billion upgrade announced in 2017. In 2014, the complex produced 511,466 vehicles, accounting for half of Jeep's global sales of about 1 million units that year. Recent developments include a $400 million investment announced in October 2025 to prepare for midsize truck production starting in 2028, expected to add over 900 jobs, alongside a 2016 infusion of $700 million that created 700 positions and celebrated Jeep's 75th anniversary.[3][1][4]

History

Founding and Early Operations

The Toledo Complex originated with the construction of the Parkway plant in 1904, initially established as a bicycle factory by the American Bicycle Company under Colonel Albert A. Pope. This facility marked an early step in Toledo's emergence as an industrial center, leveraging the city's strategic location along Lake Erie for manufacturing and transportation. By 1909, the plant had transitioned toward automotive production under Pope-Toledo, which produced gasoline-powered touring cars after experimenting with steam vehicles, but financial difficulties led to bankruptcy.[5][6][7] In 1909, entrepreneur John North Willys, who had acquired the Overland Automobile Company in 1908, purchased the assets of the bankrupt Pope-Toledo operation, including its Central Avenue plant in Toledo. Willys relocated Overland's assembly operations from Indianapolis to this site, formally establishing Willys-Overland Motors as a dedicated automobile manufacturer by 1910. Early production focused on civilian Overland models, with the 1911 Overland fore-door touring car—featuring a 40-horsepower engine and 118-inch wheelbase—representing a key example of the company's initial output, which emphasized affordable, reliable vehicles for the growing American market.[3][8][9] Under Willys' aggressive leadership, the complex expanded rapidly in the 1910s and 1920s to accommodate surging demand, including the construction of multiple new buildings such as Building 46-D in 1918 and Building 90-C around 1919, which supported increased assembly lines and component manufacturing. This growth was particularly pronounced during World War I, when Willys-Overland ramped up production of civilian and utility vehicles, achieving second place in U.S. automobile output from 1912 to 1918 and employing thousands in Toledo. The company's expansion transformed Toledo into one of the earliest major U.S. auto manufacturing hubs, serving as the city's largest employer by the 1920s and driving economic prosperity through job creation and industrial investment.[10][11][12][13][14]

Jeep Production Era

In 1941, Willys-Overland secured a pivotal contract with the U.S. Army to produce 16,000 reconnaissance vehicles, marking the beginning of Jeep manufacturing at the company's Parkway Plant in Toledo, Ohio.[15] This agreement stemmed from competitive trials where Willys' design, refined from earlier prototypes, demonstrated superior performance, leading to the rollout of the Willys MB model later that year.[16] Production rapidly scaled to meet wartime demands, with the facility on Central Avenue becoming the epicenter of output for these lightweight, four-wheel-drive vehicles essential for military operations.[17] Key innovations developed at the Toledo plant during this era included the adoption of the flat-fender design for improved aerodynamics and off-road capability, as well as the robust four-wheel-drive system that set the standard for versatile terrain navigation.[15] By the end of World War II in 1945, Willys-Overland had manufactured approximately 363,000 Jeeps at the site, accounting for more than half of the total U.S. military Jeeps produced.[18] These vehicles not only supported Allied forces across global theaters but also established Toledo as a cornerstone of off-road vehicle engineering. Following the war, civilian Jeep production commenced in 1945 with the introduction of the CJ series, adapting the military MB for public use and fueling postwar demand for rugged utility vehicles.[15] This transition bolstered the local economy, as the workforce expanded from around 15,000 employees at wartime peak to over 17,000 by 1950, drawing migrants and stimulating community growth in Toledo.[17][19] The era solidified the complex's legacy in automotive history, transforming it from a general assembly site into the dedicated hub for Jeep's enduring off-road heritage.

Ownership Changes and Modern Expansions

In 1953, Kaiser-Frazer Corporation acquired Willys-Overland, the original producer of the Jeep vehicle, integrating the Toledo facilities into Kaiser Jeep and facilitating the expansion of civilian Jeep models following World War II origins.[20] In 1969, American Motors Corporation (AMC) purchased Kaiser Jeep, which led to further development of the Jeep brand under AMC's management of the Toledo plants.[3] Chrysler Corporation acquired AMC in August 1987 for approximately $1.5 billion, renaming the facilities the Toledo Assembly Plant and incorporating them into its operations, with a focus on Jeep production.[1] This marked the integration of the complex into what became Fiat Chrysler Automobiles (FCA) upon its formation in 2014 through the merger of Fiat S.p.A. and Chrysler Group LLC.[21] In 2021, FCA merged with Groupe PSA to form Stellantis, the current owner, continuing Jeep's legacy at the site.[22] Modern expansions have been driven by significant investments to enhance capacity and introduce new models. In November 2011, Chrysler invested $500 million in the Toledo North Assembly Plant, including a 260,000-square-foot body shop expansion to support production of vehicles succeeding the Jeep Liberty and Compass.[1] In July 2016, the company committed $700 million to retool the North plant for the next-generation Jeep Wrangler (JL, adding approximately 700 jobs and shifting some production lines.[1] A further $1 billion investment in January 2017 targeted the South plant for Jeep Gladiator production.[1] Most recently, in October 2025, Stellantis announced nearly $400 million for the complex to add midsize truck production starting in 2028, expected to create over 900 jobs alongside existing Wrangler and Gladiator lines.[4] The complex spans 312 acres with 3.64 million square feet of floor space, supporting a workforce that exceeded 4,300 employees as of 2025, bolstered by the latest expansion.[1] Earlier, a second shift added about 1,100 jobs by 2013.[1] Community and environmental efforts include the 2013 dedication of the historic Overland smokestack at the adjacent industrial park, preserving a remnant of the original Willys-Overland era as a monument to Jeep workers amid site redevelopment.[23] This initiative highlighted the transition from brownfield remediation to modern operations while honoring the site's industrial heritage.[24]

Facilities

Toledo North Assembly Plant

The Toledo North Assembly Plant, constructed on a greenfield site adjacent to the existing Toledo Jeep facilities, began development in the fall of 1997 as part of a $1.2 billion investment to replace aging infrastructure and support new vehicle production.[3][1] The 2.1 million square-foot facility opened in 2001, initially dedicated to assembling the Jeep Liberty (KJ, marking a shift toward modern, high-volume SUV production at the site.[25][26] Since 2018, the plant has served as the primary global production hub for the Jeep Wrangler (JL body style), with assembly of the all-new model commencing in December 2017 following extensive retooling.[1] Production of the Jeep Wrangler 4xe plug-in hybrid variant began in December 2020, integrating advanced electrified powertrains into the vehicle's body-on-frame architecture to enable zero-emission capability while preserving off-road performance.[1][27] The facility's annual capacity exceeds 500,000 units, supporting multiple shifts and global demand through efficient body-on-frame assembly processes that emphasize durability and customization.[28] The plant is part of the complex employing over 4,300 workers as of October 2025.[29] In 2017, the plant underwent a $700 million retooling to prepare for the next-generation Wrangler, including upgrades to the body shop, a new paint facility, and stamping operations to enhance precision and throughput.[30][31] These advancements incorporated state-of-the-art automation for welding, painting, and final assembly, ensuring seamless integration of conventional and hybrid components while maintaining the Wrangler's rugged engineering standards.[1]

Toledo South Assembly Plant

The Toledo South Assembly Plant encompasses the historic core of Jeep manufacturing in Toledo, Ohio, originating with the Parkway Plant established in 1904 as a bicycle factory before being repurposed for automotive production by Willys-Overland around 1910.[16] This facility became central to Jeep's legacy when Willys-Overland began producing the Willys MB military Jeep in 1941, assembling nearly 360,000 units during World War II to support Allied efforts.[32] Over its operational lifespan, the Parkway Plant spanned approximately 6 million square feet and served as America's oldest continuously operating automobile factory, contributing to the production of iconic models like the CJ series in the postwar era.[33] Jeep assembly at the Parkway Plant continued through various ownership changes, including Kaiser-Frazer and American Motors Corporation, until Chrysler acquired AMC in 1987.[1] Production of the Jeep Wrangler shifted there in 1991 and persisted until 2006, when operations ceased as part of a broader consolidation effort.[34] The plant's closure marked the end of 96 years of vehicle manufacturing at the site, during which it produced over 11 million automobiles in total, with Jeeps forming a significant portion from the 1940s onward, including early Wrangler TJ models.[32] Demolition began incrementally in 2001, with major structures razed by 2005 and the remaining smokestacks imploded in 2007, clearing the 111-acre site for redevelopment while preserving select artifacts. In November 2024, Stellantis implemented indefinite layoffs of approximately 1,100 workers at Toledo South, reducing to a single shift on the Gladiator production line.[33][32][35] Adjacent to the Parkway Plant, the Stickney Plant was constructed in 1942 and initially used for non-automotive purposes before being acquired by American Motors in 1964 for machining and engine work.[1] In 1981, it was converted for full vehicle assembly, producing the Jeep Grand Wagoneer through 1991, and later incorporated early Wrangler production following the Parkway's expansions.[1][34] Covering about 512,000 square feet, the Stickney facility retained assembly capabilities as the broader site evolved.[36] The South site's evolution reflected Toledo's shift from disparate historic plants to a more integrated manufacturing footprint, with the Parkway's demolition enabling the development of the Toledo Supplier Park in 2007, consolidating operations into a cohesive area within the larger 3.64 million square foot complex spanning 312 acres.[1][34] This transition preserved the site's heritage role while adapting to modern needs, building on over six decades of Jeep output from the 1940s to the 2000s. Preservation efforts culminated in 2013 with the dedication of the iconic Overland smokestack— one of the few remaining structures from the original Parkway Plant—as a historical landmark at the Overland Industrial Park, honoring the workers who contributed to Jeep's legacy over a century.[33][24] The plaque commemorates the site's role in producing the first Willys Jeeps for Europe in 1941 and underscores its enduring significance to Northwest Ohio's industrial history.[37]

Support and Supplier Facilities

The Toledo Supplier Park, established in 2005 on the site of the former Stickney plant, functions as an integrated support facility adjacent to the main assembly operations at the Toledo Complex. This park employs a supplier park model where third-party partners, including KUKA for body assembly and Ohio Module Manufacturing Corp. (a Hyundai Mobis subsidiary) for chassis production, manufacture critical components such as vehicle frames and interior modules directly on-site.[1] The arrangement has been essential for Jeep Gladiator production, providing body and chassis elements since the model's launch in late 2018.[38] In November 2024, Stellantis implemented indefinite layoffs of approximately 1,100 workers at adjacent Toledo South, reducing to a single shift on the Gladiator line, with potential impacts on supplier operations.[35] Complementing the park, the Toledo Machining Plant, a 1.2 million square foot facility on 169 acres in nearby Perrysburg, Ohio, specializes in advanced powertrain components, including the Power Electronics module for the Jeep Wrangler 4xe plug-in hybrid.[39] Originally operational since 1966, the plant received new production lines in 2018 to support the Wrangler PHEV's 2020 debut, incorporating components like the Power Inverter Module and Integrated Dual Charger to enable hybrid functionality.[40] These efforts position the facility as a key enabler for electrified vehicle support without handling full battery assembly. Approximately 473 employees (as of December 2022) staff the Machining Plant, with additional hundreds at Supplier Park partners like KUKA and Hyundai Mobis, contributing to broader support operations.[41] Logistics at these support sites emphasize just-in-time delivery systems, where components from the Supplier Park and Machining Plant are transported seamlessly to assembly lines, minimizing inventory holding costs and enhancing production efficiency across the complex.[42] Expansions linked to Stellantis's nearly $400 million investment announced in October 2025 for a new midsize truck—set for 2028 production—will add around 900 jobs and further integrate these facilities.[43] Sustainability initiatives at the support facilities include brownfield remediation of the former Stickney site for the Supplier Park and energy-efficient machining processes at the Toledo Machining Plant, which reduce operational waste through optimized manufacturing techniques.[44] On-site recycling programs further support resource conservation, aligning with Stellantis's broader environmental goals for the complex.[4]

Vehicle Production

Current Models

The Toledo Assembly Complex currently produces two flagship Jeep models: the Wrangler and the Gladiator, both renowned for their off-road capabilities and shared body-on-frame architecture. The Jeep Wrangler (JL), a compact to mid-size SUV, has been assembled at the Toledo North Assembly Plant since late 2017 for the 2018 model year. It features variants such as the four-door Unlimited for expanded passenger and cargo space, and the high-performance Rubicon trim equipped with advanced off-road features like electronic locking differentials and disconnecting sway bars. The Wrangler's annual production capacity at the complex stands at approximately 300,000 units as of 2018, supporting global demand for its iconic design and 4x4 performance.[45] Complementing the standard Wrangler lineup is the Wrangler 4xe, a plug-in hybrid electric vehicle (PHEV) introduced in December 2020 at the same facility. This model integrates components from the on-site Machining Plant, including a 17 kWh battery pack, to deliver up to 21 miles of EPA-estimated all-electric range while maintaining the Wrangler's rugged capabilities, with a combined range exceeding 370 miles.[46][47] The 4xe variant has seen significant uptake, reaching a production milestone of 250,000 units by April 2025.[48] The Jeep Gladiator (JT), a midsize pickup truck, entered production in 2019 at the Supplier Park within the Toledo South Assembly Plant, utilizing the Wrangler's platform for shared engineering efficiencies. It offers a five-foot cargo bed, removable top and doors, and a maximum towing capacity of 7,700 pounds when properly equipped, making it the most capable midsize truck in its segment for off-road and utility tasks.[49][50] In October 2025, Stellantis announced plans to introduce an all-new midsize truck at the complex, shifting production from another facility to Toledo North and South plants, with assembly slated to begin in 2028. This addition will establish a third model line, supported by a nearly $400 million investment and the creation of more than 900 jobs.[4] As of 2025, the complex's annual production reflects ongoing expansions and operational efficiencies, with recent adjustments including temporary shift reductions in 2024 that were later scaled back.[45]

Past Models

The production of the Jeep CJ series at the Toledo Complex marked the transition from military to civilian vehicles following World War II. These original civilian Jeeps, including the CJ-2A introduced in 1945 and the CJ-7 produced from 1976 to 1986, were assembled at the South plant and the adjacent Parkway facility. The CJ models established the rugged, off-road heritage of the Jeep brand, with production at Toledo continuing until 1986, after which the successor Wrangler was initially produced at the Brampton Assembly Plant in Canada before shifting to Toledo in 1995 due to operational changes under American Motors Corporation ownership.[3][51][33] In 1963, the Jeep Wagoneer (SJ) debuted as the world's first full-size SUV, manufactured at the Stickney plant until its discontinuation in 1991. This body-on-frame model, which included the upscale Grand Wagoneer variant from 1984 onward, was built exclusively at Stickney after its conversion for vehicle assembly in 1981, though earlier SJ production occurred at other Toledo facilities. The Wagoneer SJ's innovative four-wheel-drive system and luxury features influenced the SUV segment for decades.[1][52] The Jeep Cherokee (XJ), launched in 1984, represented a pivotal shift to unibody construction for compact SUVs and was produced at the South plant until 2001. Over its 17-year run, more than 2.8 million units were assembled, making it one of the best-selling SUVs of its era and helping popularize the segment globally.[53][54][55] Succeeding the CJ series, the Jeep Wrangler line began at the complex with the YJ model in late 1995 at the South plant, following initial production in Brampton. The TJ generation ran from 1997 to 2006 at the South plant, introducing coil-spring suspension for improved on-road handling while retaining off-road prowess. The JK Wrangler, produced from 2007 to 2018 primarily at the South plant and transitioning to the North plant in 2018, saw over 2.1 million units built, with enhancements like optional four doors boosting its appeal.[38][56][54] The Jeep Liberty (KJ from 2002–2007 and KK from 2008–2012), a midsize SUV with independent front suspension, was exclusively built at the North plant, where approximately 1.2 million units were produced over its decade-long run. During this period, the North plant also assembled the Dodge Nitro, a related non-Jeep midsize crossover, from 2007 to 2011 in a short production stint totaling around 200,000 units.[1][57][58] Production transitions at the complex reflected evolving market demands, such as the shift from Liberty at the North plant in 2012 to a brief run of the Jeep Cherokee (KL) at the South plant from 2013 to 2017, producing 949,151 units before relocating to Belvidere, Illinois, to refocus on Wrangler assembly.[59][1]

References

  1. Toledo Assembly Complex - Stellantis Media
  2. From Willys to Fiat: Jeep's history in Toledo | The Blade
  3. [PDF] Toledo¶s Jeep Parkway - Bowling Green State University Portal
  4. Turn out the lights: America's oldest auto plant will probably soon ...
  5. The Birth of Toledo's Auto Industry: Part One, 1899-1905
  6. Willys - Overland (Part 1: 1902-1915) - Car History
  7. 5 Forgotten American Car Companies - Hagerty Media
  8. Willys-Overland Motors, Inc., Toledo, Ohio [approximately 1918]
  9. Willys-Overland Motors, Inc., Toledo, Ohio [approximately 1919]
  10. [PDF] Northwest Ohio Quarterly Volume 36 Issue 4 - Toledo's Attic
  11. Willys-Overland: lightweight cars from Whippet to Jeep - Allpar
  12. A Visual History of Toledo's Automotive Industry - Midstory
  13. Willys Jeep® MB | 1940s Military Army Jeep History & Old Jeeps
  14. Willys Overland production line, Toledo, Ohio, 1941
  15. Willys-Overland Motors in WWII
  16. How Ohio Helped Make the Jeep an Icon
  17. From its military origin, Jeep deeply ingrained in city's history
  18. 75 Years of Jeep Part 4 - Kaiser Years: Jeep Owns The Market
  19. https://jed-co.com/blogs/news/who-owns-jeep-and-its-present-day-ownership
  20. Fiat S.p.A. Reorganizes After Completion of the Purchase of ...
  21. Stellantis to Invest $13 Billion to Grow in the United States
  22. Leaders celebrate past, future of old Jeep plant - Toledo Blade
  23. Overland smokestack dedicated to Jeep workers - Toledo Blade
  24. Chrysler adds a 3rd shift in Toledo - Automotive News
  25. Chrysler kicks off production of '07 Nitro at Toledo plant
  26. Toledo Assembly Complex starts building 2021 Jeep Wrangler hybrid
  27. Toledo plant will build 500,000 Jeeps in 2014 | wkyc.com
  28. $700 Million Retool of the Toledo Jeep North Assembly Plant ...
  29. FCA US To Retool Illinois, Ohio Plants To Support Jeep Brand Growth
  30. FCA to invest $700M, add 700 jobs to Toledo plant - NBC 24
  31. Toledo history up in smoke? | The Blade
  32. Willys Factory Demolition - Toledo - CJ3B.info
  33. JEEP FEST 2021: A Brief History of Jeep in Toledo
  34. Plant project will produce bridge, gigantic complex - Toledo Blade
  35. [PDF] Jeep and Toledo
  36. The Overland Smokestack - Clio
  37. FCA US Toledo Supplier Park Builds Last Jeep® Wrangler JK
  38. Stellantis Media - Toledo Machining Plant
  39. FCA US Toledo Machining Plant to Build Key Component for First ...
  40. [PDF] The Case for Chrysler's Toledo Supplier Park and its Integrated ...
  41. [PDF] CITY OF TOLEDO, OHIO 2023 Annual Information Statement
  42. New midsize truck to be assembled in Toledo as part of nearly $400 ...
  43. Stellantis Toledo Assembly Complex Brownfield Cleanup - Verdantas
  44. Big Three: Wrangler, Ram, Cherokee Key for FCA in 2018 | WardsAuto
  45. Jeep hits 250,000 Wrangler 4xe milestone at Toledo assembly
  46. Jeep Wrangler 4xe Gets 21 Miles Of EPA Electric Range - Allpar
  47. Stellantis Celebrates 250000th Jeep® Wrangler 4xe Assembled at ...
  48. 2020 Jeep Gladiator Goes Official With Best-In-Class Towing Capacity
  49. https://www.addictivedesertdesigns.com/blogs/news/all-new-2020-jeep-gladiator-the-most-capable-midsize-truck-ever
  50. Jeep decommissions CJ line - UPI Archives
  51. SJ Super Wagoneer — The Jeep Database
  52. Jeep's 75-year campaign of global conquest - Automotive News
  53. https://www.motortrend.com/how-to/131-9809-holy-toledo-jeep-factory-tour/
  54. History of the Jeep XJ Cherokee, Part One — Birth | Quadratec
  55. https://www.toledocitypaper.com/feature/jeep-fest-2021-a-brief-history-of-jeep-in-toledo/
  56. 2007 Dodge Nitro rolls into production in Toledo | The Blade
  57. Era ends as last Cherokee rolls off Toledo line | The Blade
User Avatar
No comments yet.