Community hub
0 subscribers7 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to UIC classification of locomotive axle arrangements.
Nothing was collected or created yet.
UIC classification of locomotive axle arrangements
View on Wikipediafrom Wikipedia
The UIC classification of locomotive axle arrangements, sometimes known as the German classification[1] or German system,[2][3] describes the wheel arrangement of locomotives, multiple units and trams. It is used in much of the world, notable exceptions being the United Kingdom and North America[a].
The classification system is managed by the International Union of Railways (UIC).[4]
Structure
[edit]The UIC uses the following structure:[4]
- Upper-case letters
- Indicate driving axles, starting at A for a single axle. B thus indicates two and C indicates three consecutive pairs of driving wheels, etc.
- Lower-case "o"
- Related to driving axles (minimum 2, "B"), indicates they are individually driven by separate traction motors.
- Numbers
- Consecutive non-driving axles, starting with 1 for a single axle.
- Prime symbol " ′ "
- The axles indicated by a single letter or number are mounted on a bogie.
- Parentheses
- Groups letters and numbers describing the same bogie. For example, (A1A) indicates a three-axle bogie with the outer two axles driven. When parentheses are used around a single letter or number, a prime is not needed to indicate a bogie. Articulated locomotives can be indicated by bracketing the front power unit — for example, the Union Pacific Big Boy, 4-8-8-4 in Whyte notation, is (2′D)D2′ in UIC notation.
- Plus sign "+"
- The locomotive or multiple unit consists of permanently coupled but mechanically separate traction units.
Garratt locomotives are indicated by bracketing or placing plus signs between all individual units.
- Other suffixes
-
- h: superheated steam (German: Heißdampf, lit. 'hot steam')
- n: saturated steam (German: Nassdampf, lit. 'wet steam')
- v: compound (German: Verbund)
- Turb: turbine
- number: number of cylinders
- t: tank locomotive
- tr: tram (urban) locomotive
- E: Engerth-type locomotive
- G: freight (German: Güterzug, lit. 'goods train'). Also used to indicate shunting locomotives
- P: passenger (German: Personenzug, lit. 'passenger train')
- S: fast passenger (German: Schnellzug, lit. 'express train')
The most common wheel arrangements in modern locomotives are Bo′Bo′ and Co′Co′.
Examples
[edit]The following examples are based on the UIC classification:[4]
- (A1A)(A1A)
- Two bogies or wheel assemblies under the unit. Each bogie has one powered axle, one idle axle, and one more powered axle. All powered axles are individually driven by traction motors.
- BB
- Four powered axles all mounted in the locomotive's frame, driven in pairs, i.e. each pair of axles is connected by driving rods or gears. Compare with "D" below. (Whyte notation: 0-4-4-0)
- B′B′
- Two bogies or wheel assemblies under the unit. Each bogie has two powered axles, connected by driving rods or gears.
- Bo′(A1A)
- Two bogies or wheel assemblies. The "Bo′" bogie is under one end of the unit, and has two powered axles, while the "(A1A)" bogie under the other end of the unit has one powered axle, one idle axle, and another powered axle. All powered axles are individually driven by traction motors.
- Bo′Bo′
- Two bogies or wheel assemblies under the unit. Each bogie has two powered axles individually driven by traction motors. Three-quarters of all modern locomotives (and power cars of self-propelled trains) are configured in either this or the "B′B′" arrangement.
- Bo′Bo′Bo′
- Three bogies or wheel assemblies under the unit. Each bogie has two powered axles individually driven by traction motors.
- C
- Three powered axles, connected by driving rods or gears, all mounted in the locomotive's frame (Whyte notation: 0-6-0).
- C′C′
- Two bogies or wheel assemblies under the unit. Each bogie has three powered axles, connected by driving rods or gears. One such example of this type is Southern Pacific 9010.
- Co′Co′
- Two bogies or wheel assemblies under the unit. Each bogie has three powered axles individually driven by traction motors.
- (2Co)(Co2)
- A locomotive with two bogies, each with two leading axles and three individually powered axles. A number of Japanese electric locomotives used this wheel arrangement, including the JNR Class EF58, and the PRR GG1.
- D
- Four powered axles, connected by driving rods or gears, all mounted in the locomotive's frame (Whyte notation: 0-8-0).
- 1′D1′
- One leading idle (non-driven) axle mounted in a bogie, four driven axles mounted in the frame and connected by driving rods or gears, followed by one trailing idle axle mounted in a bogie (Whyte notation: 2-8-2).
- E
- Five powered axles, mounted in the locomotive's frame (Whyte notation: 0-10-0).
- Cn2Gt
- No leading axle, three driven axles mounted in the frame, no trailing axle, simple steam expansion, saturated steam, two cylinders, for freight trains/shunting duties, tank engine (Whyte notation: 0-6-0T).
- 2′D1′h3S
- Two front leading axles grouped in a bogie, four driving axles, one trailing axle in a bogie, simple steam expansion, superheated steam, three-cylinders, for fast trains (Whyte notation: 4-8-2).
- 1′E1′h2Gt
- One front leading axle in a bogie, five driving axles, one rear trailing axle, simple steam expansion, superheated steam, two-cylinder machine, for freight trains, tank engine (Whyte notation: 2-10-2T).
- 1′Dn4vP
- One front leading axle in a bogie, four driving axles, saturated steam, four-cylinder machine, compound (double steam expansion), for passenger trains (Whyte notation: 2-8-0).
- D′Dh4vtG
- No front leading axle, four driving axles in a bogie, four more driven axles mounted in the frame (Mallet locomotive), superheated steam, four-cylinder machine, compound (double steam expansion), tank locomotive, for freight trains (Whyte notation: 0-8-8-0T).
See also
[edit]References
[edit]- ^ In United Kingdom and North America, the Whyte notation is used for steam locomotives (and small diesel shunters in the UK). United Kingdom otherwise uses its own slightly simplified form of UIC. North America otherwise uses the AAR wheel arrangement, essentially another simplification of the UIC system.
- ^ The Railway Data File. Leicester: Silverdale, 2000. p. 52. ISBN 1-85605-499-3.
- ^ Peck C.B., Locomotive cyclopedia of American practice, 1950–52, Association of American Railroads Mechanical Division, Simmons-Boardman Pub. Co., 1950, p. 449.
- ^ Kalla-Bishop P.M. & Greggio, Luciano, Steam Locomotives, Crescent, 1985, p. 226.
- ^ a b c IRS 60650 Railway Application - Rolling Stock - Standard designation of axle arrangement on locomotives and multiple-unit sets. Paris, France: International union of railways. 2021. ISBN 9782746125209. Retrieved 23 October 2021.
External links
[edit]
Wikimedia Commons has media related to UIC classification.
- Krebs, Gunter. "Wheel Arrangement". SkyRocket.de.
UIC classification of locomotive axle arrangements
View on Grokipediafrom Grokipedia
The UIC classification of locomotive axle arrangements is a standardized notation system developed by the International Union of Railways (UIC) to describe the wheel and axle configurations of locomotives, multiple units, and trams. It categorizes arrangements based on the number of powered and unpowered axles, their grouping into bogies, and whether individual axles are driven by traction motors, using a combination of uppercase letters (A for one powered axle, B for two, C for three, and so on), numbers for unpowered axles, the lowercase "o" to denote individually powered axles, and a prime symbol (') to indicate bogie-mounted groups. This system, formalized in UIC Leaflet 650, promotes precise documentation for engineering, maintenance, and international interoperability.[1][2]
Widely adopted as the international benchmark for diesel and electric rail vehicles, the UIC classification facilitates load analysis, stability assessments, and component design, such as axlebox bearings, by defining exceptional and service load cases through finite element methods validated over 10 million cycles (equivalent to 30 years of operation). It aligns with European standards like the TSI Directive 96/48/EC for high-speed rail interoperability and is referenced in bogie monitoring for passenger and freight applications. Notable configurations include Bo'Bo' (two bogies with two individually driven axles each, used in approximately 75% of modern locomotives) and Co'Co' (two bogies with three individually driven axles each, common in heavy-haul freight), alongside variants like 1A1 for simple two-axle setups or 2'C1' for steam-era arrangements with leading, driving, and trailing axles.[2]
The system's emphasis on axles—each implying a pair of wheels—distinguishes it from wheel-counting notations and supports advanced simulations for safety factors, material yields, and endurance without physical prototyping. Originally established in the early 20th century by the UIC (founded in 1922), Leaflet 650 has been updated and, as of 2024, withdrawn in favor of the International Railway Standard IRS 60650, maintaining its role in global rail standardization.[1][2]
Overview
Purpose and Scope
The UIC classification of locomotive axle arrangements is a standardized method developed by the International Union of Railways (UIC) to describe the wheel and axle arrangements of locomotives, multiple units, and trams using alphanumeric codes. This system, detailed in UIC standards such as IRS 60650 (which superseded Leaflet 650), establishes a uniform framework for representing mechanical configurations of rail vehicles.[3] The primary purpose of the UIC classification is to offer a concise, universal notation that supports efficient design, maintenance, and international communication in railway engineering. By focusing on axle counts rather than wheel counts and explicitly differentiating powered axles (typically driven by traction motors) from unpowered ones, it enables clear documentation of vehicle layouts, aiding engineers and operators in assessing performance, load distribution, and compatibility across diverse rail networks. This emphasis on axles aligns with modern rail practices where each axle supports two wheels, simplifying descriptions for diesel, electric, and hybrid propulsion systems.[4][5] The scope of the classification encompasses a broad range of rail vehicles worldwide, including locomotives, multiple units, and trams, while addressing arrangements such as rigid axles, bogies, and articulated frames; however, it excludes in-depth details on suspension mechanics or other structural elements. It is applied globally for standardization, though some regions like the United Kingdom use a simplified variant of the UIC system for non-steam vehicles. Originating in the early 20th century through UIC's efforts from 1932 onward, the system was created to supplant inconsistent national notations, thereby enhancing interoperability for cross-border rail operations and technical harmonization.[3][6][7]Historical Development
The International Union of Railways (UIC) was established on 17 October 1922 in Paris as the primary organization to harmonize railway construction, operation, and technical standards across European networks, facilitating greater interoperability among member railways. The UIC classification system for locomotive axle arrangements originated from 19th-century German engineering practices, building on earlier European axle-counting methods that emphasized precise notation for powered and unpowered axles to standardize locomotive designs amid growing cross-border traffic.[8] These roots trace back to the Verein Deutscher Eisenbahnverwaltungen (VDEV), the Association of German Railway Administrations founded in 1846, which developed early classification schemes for locomotives based on design features, including axle configurations, to promote uniformity in German state railways before World War I. By the interwar period, the UIC formalized this German-influenced system in the 1930s to resolve inconsistencies in pre-World War II European locomotive designs, initially focusing on steam locomotives with notations for unpowered leading and trailing axles, standardizing symbols for electric locomotives in 1932 and extending to all types by 1936-1937. The standard evolved through UIC Leaflet 104 (pre-1952), Leaflet 612 (until 1981), Leaflet 650 (5th edition 1983), and was superseded by IRS 60650 (1st edition 2016).[8][3][9] Following World War II, as diesel locomotives proliferated across Europe—building on the pre-war inclusion of electric notations—the classification was adapted to modern powered bogies and individual axle motors, replacing steam traction while maintaining notations for unpowered axles.[8] In the mid-20th century, amid a major electrification boom that saw intensified network expansions—such as Germany's acceleration of electrification beyond 2,000 km in the 1950s to more substantial growth post-1960—the system continued to support interoperability for evolving rail technologies.[10]Core Notation
Axle Symbols
In the UIC classification system, individual axles are denoted using specific alphanumeric symbols that distinguish between powered and unpowered configurations, as standardized in IRS 60650 (replacing UIC Leaflet 650, withdrawn 2024) for the designation of axle arrangements on locomotives and multiple-unit sets.[1] These symbols are combined sequentially from front to rear to describe the overall layout, with each symbol representing a group of consecutive axles. Unpowered axles, which do not transmit motive power, are represented by Arabic numerals, where "1" indicates a single unpowered axle, "2" denotes two consecutive unpowered axles (on a rigid frame), and "3" a three-axle rigid group, and so on for higher counts; a prime (') denotes bogie mounting (e.g., 2' for a two-axle bogie).[11] These numerals are positioned before or after symbols for powered sections to reflect their placement relative to driven axles, emphasizing non-driving elements such as leading or trailing trucks that aid stability without propulsion.[2] Powered axles, which deliver tractive effort, are symbolized by uppercase letters: "A" for one powered axle, "B" for two, "C" for three, "D" for four, and "E" for five or more axles within a bogie or rigid frame.[12] The prime symbol (') indicates that the axles are mounted on a pivoting bogie.[11] Special notations extend the system's precision for advanced designs. Additionally, the "+" symbol denotes articulated connections between separate sections or units, linking powered and unpowered groups in multi-part vehicles.[2] A fundamental principle of the UIC system is that every symbol—whether numeral, letter, or modified—implies two wheels per axle, counting wheelsets rather than individual wheels to standardize descriptions across global railway engineering.[11] The distinction between fixed axles (directly mounted in the frame for rigid support) and pivoting axles (grouped in bogies for enhanced steering) is conveyed through symbol grouping, such as parentheses for multi-axle pivoting units or the prime for bogie isolation, ensuring clarity in load distribution and dynamic performance analysis.[12]Grouping and Format
The UIC classification notation for locomotive axle arrangements follows a sequential format from the front to the rear of the vehicle, represented as a string of symbols read left to right. Unpowered axles, typically located at the leading and trailing ends, are denoted by Arabic numerals (e.g., 1 for one unpowered axle, 2 for two consecutive unpowered axles), while powered (driving) axles in the central portion are indicated by uppercase letters (e.g., A for one powered axle, B for two, C for three). This structure prioritizes clarity in distinguishing support axles from those transmitting power, with the overall notation encapsulating the vehicle's underframe layout in a compact form.[2] Grouping rules organize axles into bogies or rigid frames, with the prime symbol (') appended to indicate axles mounted on a pivoting bogie rather than a fixed frame. For example, 2' denotes a two-axle leading bogie, while C without a prime represents three consecutive powered axles on a rigid frame, as in the notation 2'C1' for a configuration featuring a two-axle unpowered leading bogie, three powered rigid axles, and a single-axle unpowered trailing bogie. Uppercase letters apply to grouped powered axles whether on bogies or rigid sections, while lowercase 'o' specifies individually powered axles (common in electric and diesel designs, e.g., Bo' for a bogie with two individually driven axles); rigid frames use the symbols without primes, emphasizing structural differences without altering the core symbol case. Articulated designs or multi-bogie assemblies within a single unit enclose groups in parentheses to denote flexible connections, such as (2′C)+(C2′) for a Garratt-type locomotive, where each parenthesized group represents a frame with leading/trailing unpowered bogies around powered axles and the plus sign (+) links mechanically separate but permanently coupled sections.[2] For multiple-unit sets comprising separate but coupled vehicles, the notation extends the sequence with a plus sign (+) to separate mechanically independent traction units, ensuring the full arrangement reflects operational coupling without implying structural articulation (e.g., Bo'Bo' + 2'2' for two powered bogie units followed by an unpowered four-axle section). Primes within the string distinguish bogie-mounted groups from rigid ones, providing a visual cue for truck types, while optional appendages like wheel diameters (e.g., 1100 mm) or track gauges are noted separately and do not form part of the core classification, preserving the notation's focus on axle positioning and power distribution. This systematic assembly clarifies complex multi-section vehicles, including tank locomotives with integrated tenders, by treating the entire underframe as a unified string.[2][3]Usage Across Vehicle Types
Steam Locomotives
The UIC classification system for steam locomotives adapts the general notation by representing unpowered leading and trailing axles with Arabic numerals, while denoting the central group of coupled powered driving axles with a single uppercase letter, where A indicates one axle, B two axles, C three axles, and so forth.[13] This approach emphasizes the locomotive's rigid frame and the concentration of power in the driving wheels, differing from the distributed power in bogies typical of later diesel and electric designs. For instance, a classic 4-6-2 Pacific arrangement, with two leading axles, three powered driving axles, and one trailing axle, is classified as 2'C1', where the ' after C signifies the powered axles are on the main frame without a separate bogie.[13] Unique to steam applications, the system rarely employed prime symbols (') for bogies in early designs, as most steam locomotives featured rigid wheelbases rather than articulated or bogied arrangements, though primes could denote leading or trailing bogies when present, such as 2' for a two-axle leading truck.[13] Unlike wheel-counting systems like Whyte notation, UIC counts axles directly and groups coupled drivers holistically, simplifying descriptions for configurations with extensive coupling. Additionally, trailing axles are often omitted in notation if absent, resulting in streamlined forms like 'C' for a 0-6-0 switcher with three powered axles and no leading or trailing wheels.[13] Historically, the UIC classification for steam locomotives evolved from the German system introduced by Prussian state railways around 1910, which combined numerals for carrying axles with letters for coupled driving axles to standardize descriptions across European networks.[13] It gained predominance in pre-1950s Europe, particularly in Germany and influenced designs elsewhere, such as Oliver Bulleid's adaptations on the Southern Railway in Britain, where he incorporated UIC-inspired prefixes like 21C for his 4-6-2 Pacifics (indicating two leading axles and a C-group of three powered axles) in locomotive numbering schemes during the 1940s.[12] This Prussian-influenced framework facilitated international comparisons and documentation of steam locomotive evolutions, bridging early 20th-century designs to the system's later expansion.[13]Diesel and Electric Locomotives
The UIC classification system, as defined in Leaflet 650, was particularly adapted for diesel and electric locomotives to account for their reliance on traction motors that power nearly all axles, minimizing the use of numerals for unpowered axles and emphasizing letter notations for driving axles grouped in bogies.[3][4] In these designs, upper-case letters such as B for two powered axles or C for three denote consecutive driving axles, while the prime symbol (') indicates mounting in bogies, and a lower-case 'o' specifies individually driven axles via separate traction motors, reflecting the distributed power typical of electric traction.[8] This notation highlights the fully powered bogie arrangements that enable high adhesion and efficient power transmission, contrasting with steam locomotives' partial powering via rods. A prominent example is the Bo'Bo' arrangement, consisting of two bogies each with two individually powered axles, which accounts for approximately 75% of modern diesel and electric locomotives due to its balance of stability and tractive effort.[4] For heavier duties, the Co'Co' configuration features two three-axle bogies with all axles individually powered, providing enhanced hauling capacity for freight services.[8] Unique variants include articulated designs denoted as (Bo'Bo')+(Bo'Bo'), where the plus sign separates independently pivoting powered bogie groups to improve curve negotiation in long-wheelbase units, and advanced suspension notations like Bo(Bo), which indicate inner axle groupings within a bogie for optimized load distribution and reduced wear.[8] Since the 1950s, the UIC system has become the standard for diesel and electric locomotives to meet high-adhesion requirements in electrified networks, particularly in Europe where post-war electrification expanded rapidly to support economic recovery and freight efficiency.[4] This adoption addressed the shift from steam, with nearly all axles powered in these locomotives, resulting in notations dominated by letters rather than numerals.[3] Post-war exports from manufacturers like EMD and GE to European markets, such as the GT26 series classified as Co'Co', further integrated UIC notations to ensure compatibility with international standards.[14]Railcars and Trams
The UIC classification system adapts its core notation for railcars and multiple units by incorporating slashes to delineate separate car sets or powered/unpowered sections, facilitating the description of distributed traction across lighter, self-propelled vehicles. For diesel multiple units (DMUs), a common configuration like Bo'Bo'/2'2'/Bo'Bo' indicates powered end cars each with two bogies of two individually powered axles, and an unpowered intermediate car with two bogies of two unpowered axles, emphasizing powered ends with unpowered intermediates for regional services. Powered ends, such as in Bo'2' configurations, denote bogies with two powered axles followed by unpowered ones, optimizing weight distribution and efficiency in shorter formations.[15][16] In electric multiple units (EMUs), the notation extends to reflect post-1970s advancements in distributed power, where traction motors are spread across cars for smoother acceleration and higher speeds, as seen in configurations like 2'Bo'Bo'2'2'2'2'Bo'Bo' for eight-car sets. This allows integration with advanced signaling systems, such as the European Rail Traffic Management System (ERTMS), enhancing urban and high-speed operations by enabling precise speed control and interoperability. Unpowered center axles, marked by numbers (e.g., 2'), support longer consists without excessive weight, common in EMUs for passenger comfort.[17][16] For trams and light rail vehicles, the UIC system employs simplified short notations to suit single-truck or articulated designs, prioritizing low-floor accessibility and urban maneuverability. A typical single-truck tram uses 1A-A1, where the outer axles are powered (A) and the inner axle unpowered (1), ensuring stability on tight curves while minimizing infrastructure demands. Longer trams often feature unpowered center axles in Jacobs bogies (shared between cars), denoted as Bo'2'2'2'Bo', to reduce axle loads and vibration in city environments. European networks, including Deutsche Bahn's regional light rail operations, adopt these variants for seamless transitions between tramways and mainline tracks, with examples like the Talent 3 series classified as Bo'Bo'+2'2'+Bo'Bo' for powered bogies.[15][17][18]Illustrative Examples
Standard Configurations
The UIC classification system employs a notation that prioritizes adhesion through powered axles and stability via balanced bogie designs, making certain configurations prevalent across locomotive types. Common configurations for steam locomotives include 'C', denoting three consecutive powered axles for basic switching and freight duties with strong tractive effort; 2'C1', featuring two leading unpowered axles, three powered axles, and one trailing unpowered axle, which supports higher speeds while maintaining stability; and 2'D1', with two leading unpowered axles, four powered axles, and one trailing unpowered axle, optimized for heavy passenger service through enhanced adhesion and load distribution.[11] For diesel and electric locomotives, standard setups emphasize bogie-mounted powered axles to maximize traction without excessive axle loads. Bo'Bo' represents two bogies each with two individually powered axles, widely adopted for medium-haul operations due to its balance of adhesion and curve negotiation stability. Co'Co' consists of two bogies each with three powered axles, a configuration favored for heavy freight to achieve superior tractive force via greater weight distribution. Early electric designs often used 1'A'A1, comprising a single leading unpowered axle, two bogies with two powered axles each, and a single trailing unpowered axle, providing reliable power transmission in initial electrification eras.[3] Railcar and tram configurations typically feature lighter, distributed axles for urban maneuverability. 2'2' indicates two unpowered two-axle bogies, common in trailer cars for smooth riding and reduced wear. Bo'2'Bo' describes two powered two-axle bogies sandwiching an unpowered two-axle bogie, a setup for powered multiple units that ensures efficient adhesion at ends while maintaining intermediate stability. High-speed variants like 2'2' + 2'2' use articulated unpowered bogies across coupled units to support rapid transit with minimal track impact.[11][3]| Type | Configuration | Description | Key Benefit |
|---|---|---|---|
| Steam | 'C' | Three powered axles | High adhesion for short hauls |
| Steam | 2'C1' | 2 leading + 3 powered + 1 trailing | Speed and stability balance |
| Steam | 2'D1' | 2 leading + 4 powered + 1 trailing | Heavy load traction |
| Diesel/Electric | Bo'Bo' | Two 2-axle powered bogies | Versatile medium-duty use |
| Diesel/Electric | Co'Co' | Two 3-axle powered bogies | Maximum heavy-haul force |
| Diesel/Electric | 1'A'A1 | 1 leading + two 2-axle powered bogies + 1 trailing | Early power efficiency |
| Railcar/Tram | 2'2' | Two 2-axle unpowered bogies | Low-wear trailing |
| Railcar/Tram | Bo'2'Bo' | Two powered 2-axle bogies + central unpowered | End-unit propulsion |
| Railcar/Tram | 2'2' + 2'2' | Coupled unpowered bogies | High-speed articulation |