Hubbry Logo
WARC bandsWARC bandsMain
Open search
WARC bands
Community hub
WARC bands
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
WARC bands
WARC bands
WARC bands
View on Wikipedia
from Wikipedia

The World Administrative Radio Conference (WARC) bands are three portions of the shortwave radio spectrum used by licensed and/or certified amateur radio operators. They consist of 30 meters (10.1–10.15 MHz), 17 meters (18.068–18.168 MHz), and 12 meters (24.89–24.99 MHz).[1][2] They were named after the World Administrative Radio Conference, which in 1979 created a worldwide allocation of these bands for amateur use. The bands were opened for use in the early 1980s. Due to their relatively small bandwidth of 100 kHz or less, there is a gentlemen's agreement that the WARC bands may not be used for general contesting. This agreement has been codified in official recommendations, such as the IARU Region 1 HF Manager's Handbook, which states: "Contest activity shall not take place on the 5, 10, 18, and 24 MHz bands."[3]

Non-contesting radio amateurs are recommended to use the contest-free HF bands (30, 17, and 12m) during the largest international contests.[4]

12-meter band plan

[edit]

IARU Region 1[5]

[edit]
License class 24.89–24.915 24.915-24.925 24.925-24.929 24.929-24.931 24.931-24.94 24.94-24.99
Effective 1 January 2008 CW only CW, narrow-band digital CW, narrow-band digital, unattended stations Beacons CW, narrow-band digital, unattended stations All modes

IARU Region 2[6]

[edit]
License class 24.89–24.915 24.915-24.925 24.925-24.929 24.929-24.931 24.931-24.94 24.94-24.99
Effective 1 January 2008 CW only CW, narrow-band digital CW, narrow-band digital, unattended stations Beacons CW, narrow-band digital, unattended stations All modes

Canada[7]

[edit]

Canada is part of region 2 and as such is subject to the IARU band plan. Radio Amateurs of Canada offers the bandplan below as a recommendation for use by radio amateurs in that country.[7]

License class 24.89–24.92 24.920-24.925 24.925-24.94 24.94-24.975 24.975-24.978 24.978-24.99
Basic (+), Advanced CW only Digital only CW, narrow-band digital, wide band digital Phone only TV only Phone only

United States[1]

[edit]
License class 24.89–24.93 24.93-24.99
Extra, Advanced, General CW, narrow-band digital CW, phone, image

IARU Region 3[8]

[edit]
License class 24.89–24.92 24.92-24.9295 24.9295-24.9305 24.94-24.99
Effective as of 2009 CW only CW, narrow-band digital Beacons All modes 2 kHz max BW

Japan[9]

[edit]
License class 24.89–24.900 24.900-24.930 24.930-24.990
ALL Class CW only CW, narrow-band digital Narrowband all modes

17-meter band plan

[edit]

IARU Region 1

[edit]
License class 18.068-18.095 18.095-18.105 18.105-18.109 18.109-18.111 18.111-18.12 18.12-18.168
Effective 1 January 2008 CW only CW, narrow-band digital CW, narrow-band digital, unattended stations Beacons All modes, unattended stations All modes

IARU Region 2

[edit]
License class 18.068-18.095 18.095-18.105 18.105-18.109 18.109-18.111 18.111-18.120 18.120-18.168
Effective 1 January 2008 CW only CW, narrow-band digital CW, narrow-band digital, unattended stations Beacons All modes, unattended stations All modes

Canada[7]

[edit]

Canada is part of region 2 and as such is subject to the IARU band plan. Radio Amateurs of Canada offers the bandplan below as a recommendation for use by radio amateurs in that country.

License class 18.068-18.095 18.095-18.1 18.1-18.11 18.11-18.168
Basic (+), Advanced CW only CW, narrow-band digital, wide band digital Digital only Phone only

United States[1]

[edit]
License class 18.068-18.11 18.11-18.168
Extra, Advanced, General CW, narrow-band digital CW, phone

IARU Region 3

[edit]
License class 18.068-18.095 18.095-18.105 18.105-18.1095 18.1095-18.1105 18.1105-18.168
Effective as of 2009 CW only CW, narrow-band digital CW, narrow-band digital, wide band digital Beacons All modes

Japan

[edit]
License class 18.068-18.08 18.08-18.11 18.11-18.168
ALL class CW only CW, narrow-band digital Narrowband all modes

30-meter band plan

[edit]

IARU Region 1

[edit]
License class 10.1-10.13 10.13-10.15
Effective 1 June 2016 CW only CW, narrow-band digital

Throughout most of the world, the 30-meter band generally cannot be used for "phone" (voice) communications. SSB may be used during emergencies involving the immediate safety of life and property and only by stations actually involved in the handling of emergency traffic.

However, a part of Region 1 is permitted to use phone at certain times.[10] The band segment 10.12 to 10.14 may only be used for SSB transmissions in the area of Africa south of the equator during local daylight hours.

IARU Region 2

[edit]
License class 10.1-10.13 10.13-10.14 10.14-10.15
Effective 1 January 2008 CW only CW, narrow-band digital All modes except phone

Canada[7]

[edit]

Canada is part of Region 2 and as such is subject to the IARU band plan. Radio Amateurs of Canada offers the bandplan below as a recommendation for use by radio amateurs in that country.

License class 10.1-10.13 10.13-10.14 10.14-10.15
Basic (+), Advanced CW only Digital only CW, narrow-band digital, wide band digital

United States

[edit]
License class 10.1-10.15
Extra, Advanced, General (200 watts) CW, narrow-band digital

The USA limits amateur radio users to 200 watts peak envelope power on this band.[11][12]

IARU Region 3

[edit]
License class 10.1-10.14 10.14-10.15
Effective 2009 CW only CW, narrow-band digital

Australia

[edit]

Australia (VK, region 3) has a unique set of privileges on 30 meters which allows voice operation on a section of the band for advanced license holders. The digital segment is 10.13-10.15 MHz. The current band plan has telephony from 10.12–10.135 MHz, with CW only below 10.12. These are WIA [13] recommendations only as ACMA does not restrict Australian amateurs' modes within HF allocations beyond requiring less than 8 kHz occupied bandwidth per channel below 28 MHz.

Japan

[edit]
License class 10.1-10.12 10.12-10.15
1st and 2nd CW only narrow-band All modes

Note: The occupied bandwidth shall be less than 2kHz.

Key for band plans

[edit]
= CW only
= CW, narrow band digital ( <= 500 Hz )
= CW, narrow band digital ( <= 500 Hz ), unattended stations
= CW, narrow band digital ( <= 500 Hz ), wide band digital
= Beacons
= CW, phone
= All modes, unattended stations
= All modes except phone
= Digital only
= Phone only
= TV only
= All modes

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

WARC bands

View on Grokipedia
from Grokipedia
The WARC bands are three high-frequency bands—30 meters (10.100–10.150 MHz), 17 meters (18.068–18.168 MHz), and 12 meters (24.890–24.990 MHz)—allocated to the service worldwide at the 1979 World Administrative Radio Conference (WARC-79) in , , with the 30-meter band on a secondary basis. These allocations provided amateur operators with additional spectrum in the shortwave range to support international communications, particularly for long-distance (DX) contacts, without encroaching on pre-existing bands that were already heavily utilized. The bands' narrow widths—50 kHz for 30 meters, 100 kHz for 17 meters, and 100 kHz for 12 meters—were designed to minimize interference with adjacent services, such as fixed and mobile allocations. In the United States, access to these bands is restricted to , Advanced, and Amateur Extra class licensees, with mode-specific subbands: for example, on 17 meters, CW, RTTY/, and modes are permitted from 18.068–18.110 MHz, while phone operations extend to 18.168 MHz, with power limits of 200 W PEP for 30 meters and 1.5 kW PEP for 17 and 12 meters. Globally, the bands' propagation characteristics make them valuable during peaks; 12 meters excels for trans-equatorial paths, 17 meters offers reliable daytime DX, and 30 meters supports nighttime operations with low noise levels, often favoring digital modes like FT8. A key operational tradition, reinforced by major contest rules from organizations like the ARRL, prohibits general contesting on WARC bands to preserve their quieter environment for casual and experimental use. Since their inception, these bands have facilitated thousands of awards, such as the ARRL's DX Century Club (DXCC) endorsements for each, underscoring their role in advancing amateur radio's technical and international outreach.

History

World Administrative Radio Conference of 1979

The World Administrative Radio Conference of 1979 (WARC-79), held in , , from September 24 to December 6, convened under the auspices of the (ITU) to revise the international Radio Regulations and reallocate the global radio-frequency spectrum in response to technological advancements and increasing demand for spectrum resources. Attended by approximately 2,000 delegates and observers from 142 countries and 30 organizations, the conference processed around 15,000 proposals, with over 12,000 focused on frequency allocations, aiming to balance needs across services including , mobile, and fixed communications. Amateur radio organizations, particularly the (IARU), played a key advocacy role by deploying an observer team of 13 members who attended all relevant meetings throughout the conference to represent global amateur interests amid rising participation in the hobby and pressure on existing high-frequency (HF) bands. The IARU's efforts highlighted the need for additional HF spectrum to accommodate growing amateur radio activity without interfering with primary users. The conference resulted in three new allocations specifically for the amateur service: 10.100–10.150 MHz (30-meter band) on a secondary basis worldwide, 18.068–18.168 MHz (17-meter band) on a primary basis including the amateur-satellite service, and 24.890–24.990 MHz (12-meter band) on a primary basis. These bands were designated as shared or secondary to other services in some cases, reflecting compromises to protect existing allocations like broadcasting. The new allocations entered into force as part of the revised Radio Regulations on January 1, , but included initial global restrictions prohibiting immediate operational use by amateurs until individual countries approved and implemented them through national regulations. For the 17-meter and 12-meter bands, implementation was further delayed beyond due to required transfer procedures from prior users. Subsequent conferences refined these allocations over time.

Allocation Process and Initial Restrictions

Following the World Administrative Radio Conference of 1979, the (ITU) formalized the new frequency allocations through the adoption of the revised Radio Regulations, , 1979, which were integrated into the conference's Final Acts. These Final Acts were signed by ITU member states, binding them to the outcomes, and the regulations entered into force internationally on January 1, 1982, thereby establishing the legal framework for the three new bands. The service received secondary status in the 10.1–10.15 MHz (30 meters) band and primary status (shared with fixed and mobile services) in the 18.068–18.168 MHz (17 meters) and 24.89–24.99 MHz (12 meters) bands, requiring amateurs to avoid harmful interference to other users where applicable. This designation aimed to balance sharing while accommodating the amateur community's for . Early restrictions emphasized efficiency and of incumbents, limiting each band to narrow widths of 50 kHz for 30 meters and 100 kHz for 17 and 12 meters to minimize potential conflicts. High-power operations faced prohibitions or caps in various regions; for instance, the restricted output to 200 watts PEP on 30 meters to safeguard fixed-service users. National licensing delays arose as countries adapted the international rules domestically, often requiring additional reviews for compatibility with local priorities. The first operational access varied by nation, reflecting these implementation timelines. , the authorized use of the 30-meter band on October 28, 1982, followed by the 12-meter band in 1985 and the 17-meter band on January 31, 1989, after rule-making proceedings confirmed no undue interference risks. Similar phased rollouts occurred globally, with some European countries enabling 30 meters in the early while others awaited further coordination.

Global Implementation and Subsequent Conferences

The allocations from the 1979 World Administrative Radio Conference (WARC-79) for the 30-meter, 17-meter, and 12-meter amateur bands entered into force globally on January 1, 1982, as part of the revised ITU Radio Regulations. However, national implementations varied, with many countries adopting the bands in phases during the early 1980s to align domestic regulations. In the United States, the Federal Communications Commission (FCC) approved the 30-meter band (10.100–10.150 MHz) for amateur use on October 28, 1982, followed by the 12-meter band (24.890–24.990 MHz) in 1985 and the 17-meter band (18.068–18.168 MHz) on January 31, 1989. In Europe, the European Conference of Postal and Telecommunications Administrations (CEPT) facilitated openings in the 1980s, enabling widespread access across member states by the mid-decade. Subsequent World Radiocommunication Conferences (WRCs) affirmed and refined these allocations. The WRC-92 in Málaga-Torremolinos confirmed the WARC-79 amateur secondary allocations while addressing related broadcasting overlaps, ensuring their permanence in the international table. Further minor adjustments occurred at WRC-03 in , which enhanced coordination procedures to protect amateur operations from adjacent service encroachments, and at WRC-15 in , which strengthened interference mitigation measures for secondary users like amateurs. These conferences prioritized conceptual safeguards over major reallocations, maintaining the bands' narrow 50–100 kHz widths. Implementation faced challenges from primary service users, such as fixed and mobile services sharing the spectrum, leading to occasional interference reports. The (IARU) responded by establishing a global monitoring system in the 1980s to detect, document, and coordinate resolution of such issues, emphasizing amateurs' secondary status and obligation to avoid causing harmful interference. Initially, the 30-meter band permitted only CW and modes globally to minimize interference risks, with phone (SSB) operations introduced via national exceptions in later years, such as limited segments in Region 1 above 10.140 MHz. As of 2025, the bands enjoy stable secondary allocations with no significant revisions, supported by ongoing IARU advocacy.

Band Descriptions

30-Meter Band

The 30-meter band, allocated to operators on a secondary basis worldwide, spans the range of 10.100–10.150 MHz, corresponding to a of approximately 30 meters and a total bandwidth of 50 kHz. This narrow allocation was established at the World Administrative Radio Conference of 1979 (WARC-79) to provide an additional HF band for non-voice communications. As a secondary service, the band is shared with primary fixed services, requiring amateur operators to avoid causing interference to those users, particularly outside the . In the , power is limited to a maximum of 200 watts (PEP), and operators must use the minimum power necessary for effective communication. Globally, similar secondary status applies, with international regulations emphasizing protection of fixed service operations. Antenna designs for the 30-meter band are influenced by its relatively long wavelength among the WARC bands, with full-size half-wave dipoles requiring about 15 meters total length (7.5 meters per leg), often leading operators to use shortened dipoles with loading coils or compact vertical antennas to accommodate space constraints in urban or portable setups. These designs, including magnetic loop antennas suitable for 30 meters through 12 meters, maintain reasonable efficiency while meeting practical installation needs. The band is primarily used for continuous wave (CW) Morse code and narrowband digital modes such as RTTY and FT8, with no phone or image emissions permitted in most regions to minimize bandwidth usage and interference risks. However, limited single-sideband (SSB) voice operation is allowed in select countries, including Australia, where it occupies a sub-band segment like 10.125–10.135 MHz.

17-Meter Band

The 17-meter band encompasses the range of 18.068–18.168 MHz, corresponding to a nominal of approximately 17 meters and offering a total bandwidth of 100 kHz. This allocation provides operators with a compact segment in the high- (HF) spectrum, suitable for various communication purposes. Established through the World Administrative Radio Conference of 1979 alongside the 30-meter and 12-meter bands, the 17-meter band holds secondary status in the (ITU) allocations, meaning amateur operations must not interfere with primary services and must tolerate any interference received. Specific protections exist to safeguard against potential broadcasting interference in adjacent spectra, while permitting full access to modes such as (CW), single-sideband (SSB) voice (phone), and digital emissions across the band. Maximum transmitted power is limited to 1,500 watts (PEP), with operators required to use the minimum power necessary for effective communication. Antenna designs for the 17-meter band benefit from its moderate wavelength, making half-wave dipoles—a simple and effective option—feasible for many operators, with a typical length of about 26 feet (8 meters) that fits well in urban or suburban installations. The band is widely used for a balanced array of operating modes, including CW for precise signaling, SSB for voice contacts, and digital protocols like for efficient data exchange, and it remains popular for intercontinental and long-distance (DX) propagation due to its reliable daytime performance.

12-Meter Band

The 12-meter band, allocated to amateur radio operators at the World Administrative Radio Conference of 1979 (WARC-79), spans 24.890–24.990 MHz, providing a bandwidth of 100 kHz and corresponding to a wavelength of approximately 12 meters. This band operates on a primary allocation basis in all ITU regions, allowing amateur stations equal priority with other services, though it remains susceptible to interference from non-amateur uses in shared spectrum. Due to its position at the upper end of the high-frequency (HF) spectrum, propagation is highly variable and often sporadic, making it particularly vulnerable to solar-induced fade-outs from enhanced D-layer absorption during flares, which can abruptly silence signals across the band. A dedicated segment at 24.929–24.930 MHz is reserved exclusively for the International Beacon Project (IBP), a global network of propagation s that transmit sequentially every three minutes to monitor ionospheric conditions and assist operators in assessing band openings. These beacons, operating at 100 W with callsigns such as 4U1UN (), W6WX (), and YV5B (), provide critical real-time data on worldwide signal paths, especially useful given the band's intermittent usability. Antenna designs for the 12-meter band leverage its relatively short , enabling compact installations compared to lower HF bands; popular options include multi-element Yagi beams with booms as short as 2.4 meters for directional gain and simple wire dipoles or end-fed configurations that span about 6 meters total length. These setups facilitate VHF-like on HF frequencies, supporting efficient DX (long-distance) contacts when conditions permit. General usage encompasses all amateur modes, including CW, SSB voice, digital data, and image transmission, though activity is typically low and opportunistic due to the band's dependence on favorable solar conditions for . The inclusion of the IBP beacons enhances its role as a indicator, often signaling openings before activity peaks on adjacent 10- or 15-meter bands.

Propagation Characteristics

Skywave Propagation in WARC Bands

Skywave propagation enables long-distance communication, known as DX, on the WARC bands through reflection of radio signals from the ionosphere's F-layer, which is the primary reflecting region for frequencies in the high-frequency (HF) spectrum. The WARC bands, operating at 10.1–10.15 MHz (30 meters), 18.068–18.168 MHz (17 meters), and 24.89–24.99 MHz (12 meters), rely on this mechanism for signals to travel beyond line-of-sight distances by being refracted back to after encountering the ionized F-layer at altitudes of approximately 150–500 km. The F-layer's electron density determines its reflective capability, with critical frequencies (foF2) typically ranging from 10 to 25 MHz under favorable ionospheric conditions, allowing these bands to support transcontinental and intercontinental contacts. A key aspect of is the maximum usable frequency (MUF), which represents the highest frequency that can be reflected back to for a given path and ionospheric conditions. The MUF is approximated by the MUF≈foF2cos⁡(θ/2),\text{MUF} \approx \frac{\text{foF2}}{\cos(\theta/2)}, where foF2 is the of the F2 sub-layer and θ\theta is the angle of incidence relative to the vertical. This calculation accounts for oblique incidence paths, where lower takeoff angles from the antenna enable longer skip distances but require higher frequencies to avoid penetration through the . Skip zones, the regions between the transmitter and the first reflection point where signals do not reach the ground due to insufficient , vary with frequency and ionospheric tilt, often spanning hundreds to thousands of kilometers on WARC bands. Propagation reliability on WARC bands varies diurnally due to ionospheric dynamics, with the 30-meter band exhibiting consistent nighttime performance for medium- to long-distance paths because of minimal D-layer absorption after sunset, facilitating reliable F-layer reflections. The 30-meter band functions as a "bridge" band, combining propagation characteristics of the nighttime-oriented 40-meter band and the daytime-oriented 20-meter band, providing opportunities around the clock, in contrast to the more daytime-focused 17-meter and 12-meter bands. In contrast, the 17-meter and 12-meter bands perform better during hours when solar illumination enhances F-layer , supporting enhanced DX openings particularly toward equatorial and polar regions. Multi-hop paths, involving successive reflections between the F-layer and Earth's surface, extend coverage globally, allowing signals on these bands to traverse multiple continents via 2- to 4-hop trajectories under optimal conditions.

Groundwave and Near-Vertical Incidence Skywave (NVIS)

Groundwave in the WARC bands refers to the surface wave mode where radio signals follow the Earth's , enabling short-range communications typically up to 100–200 km, with greater reliability on the lower-frequency 30-meter band due to reduced compared to higher frequencies. This mode is particularly useful over varied , as the signal hugs the ground and experiences less obstruction than line-of-sight paths, though signal strength diminishes with distance and frequency. Near-vertical incidence skywave (NVIS) propagation utilizes high-angle , typically 60–90 degrees , to reflect signals off the ionospheric F-layer for regional coverage of 300–800 km, making it well-suited for filling gaps between groundwave and longer-distance modes. In the WARC bands, NVIS performs effectively on the 30-meter and 17-meter allocations, supporting communication nets where reliable short-to-medium range links are essential, such as in scenarios. complements NVIS by enabling longer-range contacts beyond these distances. Optimal antenna configurations for NVIS in these bands include low horizontal dipoles or inverted-V antennas mounted at heights of 0.1–0.3 above ground to maximize upward radiation patterns. For the 30-meter band ( ≈30 m), this equates to approximately 3–9 meters (10–30 feet), while for 17 meters ( ≈17 m), heights of 1.7–5 meters (5.5–16 feet) are ideal, ensuring near-omnidirectional coverage with minimal takeoff angle skew. These setups, often using simple wire elements supported by lightweight masts, facilitate portable emergency operations. A key limitation of NVIS in the WARC bands is daytime absorption in the ionospheric D-layer, which attenuates signals passing through it, particularly affecting lower frequencies like 30 meters during peak sunlight hours. The 12-meter band is generally less effective for NVIS due to its higher frequency often exceeding the (foF2) required for reliable F-layer reflection, resulting in reduced high-angle performance compared to the 30- and 17-meter bands. The performance of WARC bands is significantly influenced by the 11-year , which modulates ionospheric conditions through variations in activity and associated ultraviolet radiation. reached its maximum in October 2024, with a smoothed number (SSN) peak of 160.8, leading to enhanced propagation on the higher-frequency 17-meter and 12-meter bands during the 2024–2025 period. This peak facilitated frequent long-distance (DX) openings on these bands, particularly during daytime hours when the maximum usable (MUF) exceeded 21 MHz, enabling trans-equatorial and contacts. In contrast, the 30-meter band maintained its characteristic stability throughout the cycle, with reliable regional and moderate DX propagation due to lower absorption in the D-layer and consistent F-layer support, showing minimal decline even as solar activity waned. During declining phases of the solar cycle, the 30-meter band often remains open for more hours than higher bands like 20 meters, supporting reliable propagation and unique long-path openings that enable signals to travel the opposite direction around the globe. Sunspot number serves as a key predictor of quality, with higher values directly correlating to elevated critical frequencies in the . When SSN exceeds 100, the MUF for 17-meter and 12-meter bands typically rises above their nominal frequencies, improving DX opportunities such as transatlantic and transpacific paths by enhancing F-layer efficiency. This relationship stems from increased radiation ionizing the F-region more densely, allowing higher-frequency signals to reflect effectively. For the 30-meter band, however, remains relatively consistent across SSN levels, relying more on stable nighttime conditions and less on peak solar flux, making it a dependable choice during transitional phases of the cycle. Historically, the 12-meter band has exhibited dramatic variability, often becoming effectively "dead" for DX during solar minima due to insufficient , as seen in the prolonged low-activity period from to encompassing the end of 23 and the rise of Cycle 24. The 30-meter band, by comparison, demonstrated resilience across multiple cycles, supporting consistent NVIS and mid-range paths even at SSN near zero, owing to its position below the typical F-layer absorption threshold. As of November 2025, is in a post-peak decline phase, with provisional SSN dropping toward 100–120, yet the 17-meter band continues to offer viable transatlantic , particularly via and CW modes during afternoon-to-evening hours in the . Recent solar storms in early November 2025, including X-class flares and geomagnetic disturbances around –14, temporarily enhanced high-frequency but also introduced variability due to ionospheric disturbances. This lingering usability reflects the band's transitional nature between 20-meter reliability and 15-meter sensitivity, with recent reports confirming openings from to on paths around 18.100 MHz. The 12-meter band is experiencing more pronounced closure, while 30 meters sustains its steady performance for intra-continental links.

Usage and Regulations

Common Operating Modes and Practices

In the WARC bands, (CW) dominates the lower frequency segments, typically allocated for narrow-bandwidth operations up to 200 Hz, providing efficient long-distance communication with low power. Single-sideband (SSB) suppressed-carrier phone, limited to a maximum bandwidth of 2.8 kHz, is commonly employed in the upper sub-bands of the 17-meter and 12-meter allocations, facilitating voice contacts during favorable propagation conditions. Digital modes, including variants like PSK31 (occupying around 31 Hz) and the more recent (using 50 Hz slots), are prevalent throughout all three bands in designated narrow-band areas up to 500 Hz, enabling weak-signal decoding and global networking even under marginal conditions. Operators in these bands emphasize strict adherence to bandwidth limitations to prevent interference, given the secondary status of the allocations, with SSB transmissions confined to 2.8 kHz or less and digital signals to 500 Hz maximum; exceeding these can result in splatter across adjacent frequencies. A core practice is to listen attentively before transmitting—often querying "QRL?" in CW or verbally checking frequency availability—to confirm the channel is unoccupied, thereby respecting ongoing contacts and minimizing disruptions in these relatively narrow spectra. This etiquette extends to identifying with full callsigns at regular intervals and yielding to established QSOs. Band-specific conventions shape usage: the 30-meter band (10.100–10.150 MHz) is globally limited to CW and digital modes, excluding all voice operations to preserve its narrow 50 kHz width and focus on telegraphy and data. In the United States, this restriction is codified in FCC regulations, permitting only CW and data emissions on the band. In contrast, the 17-meter (18.068–18.168 MHz) and 12-meter (24.890–24.990 MHz) bands support comprehensive voice privileges in their upper segments, alongside CW and digital, allowing versatile mixed-mode activity. On the 12-meter band, dedicated segments (e.g., 24.929–24.931 MHz in Region 2) host international beacons that operators routinely monitor for real-time solar and ionospheric insights before attempting contacts. Usage rates on the 30-meter band are generally lower than on more popular HF bands like 20 meters and 40 meters, but the band maintains steady activity, particularly in digital modes such as FT8, with activity levels often increasing during periods of low solar activity when higher-frequency bands experience poor propagation conditions. Equipment for WARC band operations typically consists of HF transceivers spanning 10–28 MHz, such as those in the 100-watt class from major manufacturers, equipped with selectable narrow filters (e.g., 500 Hz for CW/digital, 2.4–2.8 kHz for SSB) to navigate dense signal environments and comply with emission standards. These rigs often integrate for and mode-specific decoding, enhancing usability across the bands' varied propagation behaviors.

Restrictions and IARU Guidelines

The (IARU) has maintained a policy since the early 1980s prohibiting contest activity on the WARC bands (30 m, 17 m, and 12 m) to safeguard their limited spectrum resources. This originated as a following the bands' allocation at the 1979 World Administrative Radio Conference, with formal codification in IARU band plans and resolutions, including Resolution 17-1 adopted in 2017, which explicitly states that contests are not permitted in these narrow allocations. This no-contesting tradition is particularly emphasized for the 30-meter band due to its narrow width, secondary status, and exclusive focus on CW and digital modes. The bans multi-operator contests outright and restricts single-operator events to minimize interference risks, as these bands' narrow widths—50 kHz for 30 m and 100 kHz for 17 m and 12 m—make them susceptible to rapid overcrowding during competitive operations. The primary rationale is to preserve the bands for quieter, non-competitive pursuits such as casual DX contacts and ragchewing, ensuring they remain viable for individual operators seeking interference-free communication. Enforcement relies on self-regulation by the global amateur radio community, with IARU member societies and contest organizers encouraged to adhere to the guidelines by excluding WARC bands from event rules and band plans. As a result, major DX contests worldwide do not include these bands, and as of 2025, no significant competitive events operate on them; exceptions are limited to minor, non-competitive activities such as beacon hunts on 12 m that do not generate widespread interference.

Power Limits, Secondary Status, and International Variations

The 30-meter band is allocated on a secondary basis worldwide to the service, the 17-meter band on a primary basis globally, and the 12-meter band on a primary basis in ITU Regions 2 and 3 but secondary in Region 1. In jurisdictions where secondary, amateur operations must not cause harmful interference to primary users, such as government fixed and mobile services, and must cease or adjust if interference occurs. For instance, in the 30-meter band (10.1-10.15 MHz), amateurs worldwide are required to protect international fixed service operations, accepting any interference from those primary allocations without recourse. This secondary status stems from the bands' origins at the World Administrative Radio Conference, where limited spectrum was granted to amateurs alongside existing services to minimize disruption. The distinctions in primary/secondary status for 17m and 12m across ITU regions affect operators' rights to protection from interference globally. Power limits for amateur transmissions in the WARC bands vary by country and band to safeguard shared spectrum. In many countries, including the , the maximum is 1500 watts peak envelope power (PEP), though national regulators impose stricter limits on the 30-meter band to reduce interference risks. In the United States, the FCC restricts output to 200 watts PEP across the entire 30-meter band, reflecting its secondary status and narrow allocation, while the 17-meter (18.068-18.168 MHz) and 12-meter (24.89-24.99 MHz) bands allow up to 1500 watts PEP as primary allocations. In many European countries under CEPT harmonization, the 30-meter band is limited to 200 watts PEP due to its secondary status. In , power limits on the 30-meter band vary by license class, with digital modes limited to 10 watts PEP for 4th class operators and higher limits for advanced classes, reflecting stricter domestic controls on shared HF spectrum and emphasizing low-power operations for novice licensees. International variations arise from ITU Radio Regulations Article 25, which mandates that stations operate without causing harmful interference and coordinate with primary services, with protections enforced through national administrations. CEPT Recommendation T/R 61-01 promotes harmonized band access and power standards across , enabling reciprocal licensing while respecting secondary constraints on 30 meters. In contrast, U.S. FCC rules under 47 CFR Part 97 provide band-specific details, including explicit interference avoidance for 30 meters and full primary status for 17 and 12 meters. As of 2025, no major regulatory changes have altered these frameworks, though organizations like the IARU have emphasized enhanced spectrum monitoring to address potential emerging threats, such as harmonic interference from expanding deployments near the 12-meter band.

Band Plans by Region

IARU Region 1

In IARU Region 1, encompassing , , the , and surrounding areas, the band plans for the WARC bands (30 m, 17 m, and 12 m) are governed by unified guidelines established by the (IARU). These plans prioritize continuous-wave (CW) and narrowband digital modes to minimize interference, given the secondary allocation status of these bands for service globally. All emissions are limited to a maximum bandwidth of 2.7 kHz, with conventions using lower sideband (LSB) below 10 MHz and upper sideband (USB) above 10 MHz; unmanned stations are restricted except for designated beacons. The 30 m band (10.100–10.150 MHz) is dedicated exclusively to CW and modes, reflecting its narrow allocation and emphasis on long-distance and data communications. The sub-band from 10.100–10.130 MHz is allocated for CW operations, with a maximum bandwidth of 200 Hz and a QRP center of activity at 10.116 MHz. From 10.130–10.150 MHz, digital modes (digimodes) are permitted, limited to 500 Hz bandwidth. An exception allows limited SSB usage in the segment 10.120–10.140 MHz for stations in African countries south of the during local daylight hours, restricted to traffic involving immediate safety of life or property. No phone operations or beacons are authorized in this band. These allocations were last updated effective 1 June 2016.
Sub-band (MHz)Maximum BandwidthPreferred ModeNotes
10.100–10.130200 HzCWQRP center at 10.116 MHz
10.130–10.150500 HzNarrowband digital modes
10.120–10.140 (African equatorial exception)2.7 kHzSSB (limited)Emergency use only during daylight; south of equator
The 17 m band (18.068–18.168 MHz) supports a broader range of modes, balancing CW precision with all-mode flexibility for voice and data. CW occupies 18.068–18.095 MHz (200 Hz max), followed by narrowband digimodes from 18.095–18.105 MHz (500 Hz). An additional digimodes segment for automatically controlled stations spans 18.105–18.109 MHz (500 Hz), leading to the exclusive international beacon allocation at 18.109–18.111 MHz. All modes, including SSB and digimodes, are permitted from 18.111–18.168 MHz (2.7 kHz max), with centers of activity at 18.130 MHz (SSB QRP), 18.150 MHz (digital voice), and 18.160 MHz (emergency). These guidelines, originating from the 2008 IARU plan and reaffirmed in 2016, promote efficient spectrum use during varying propagation conditions.
Sub-band (MHz)Maximum BandwidthPreferred ModeNotes
18.068–18.095200 HzCWQRP center at 18.086 MHz
18.095–18.105500 HzNarrowband digital modes
18.105–18.109500 HzNarrowband digital modes (auto-controlled)
18.109–18.111N/ABeaconsInternational Beacon Project
18.111–18.1682.7 kHzAll modesSSB QRP at 18.130 MHz; digital voice at 18.150 MHz; at 18.160 MHz
Similarly, the 12 m band (24.890–24.990 MHz) follows a structure analogous to the 17 m band, emphasizing CW at the lower end and expanding to all modes higher up. CW is allocated 24.890–24.915 MHz (200 Hz max), with narrowband digimodes from 24.915–24.925 MHz (500 Hz) and an auto-controlled digimodes segment at 24.925–24.929 MHz (500 Hz). are exclusive to 24.929–24.931 MHz, followed by all modes from 24.931–24.990 MHz (2.7 kHz max), including centers at 24.950 MHz (SSB QRP) and 24.960 MHz (digital voice). Established in the 2008 plan and current as of the 2016 update, these segments facilitate experimentation and international contacts while protecting beacon operations.
Sub-band (MHz)Maximum BandwidthPreferred ModeNotes
24.890–24.915200 HzCWQRP center at 24.906 MHz
24.915–24.925500 HzNarrowband digital modes
24.925–24.929500 HzNarrowband digital modes (auto-controlled)
24.929–24.931N/ABeaconsInternational Beacon Project
24.931–24.9902.7 kHzAll modesSSB QRP at 24.950 MHz; digital voice at 24.960 MHz

IARU Region 2

In IARU Region 2, encompassing the Americas, the band plans for the WARC bands (30 m, 17 m, and 12 m) are designed to promote efficient spectrum use while accommodating regional variations, particularly in the United States and Canada, where national regulations align closely with International Telecommunication Union (ITU) allocations but include specific mode restrictions and power limits. These plans, revised in September 2020 by the International Amateur Radio Union (IARU) Region 2, emphasize continuous-wave (CW) and digital modes in lower sub-bands, with voice (phone) and image modes permitted in upper portions where allocated, and prohibit contesting activity to preserve these bands for non-competitive operations. The U.S. Federal Communications Commission (FCC) under 47 CFR Part 97 and the American Radio Relay League (ARRL) band plan enforce secondary status on 30 m with a 200 W peak envelope power (PEP) limit, while Industry Canada aligns with similar mode segments but permits wider digital allowances on 30 m. The 30 m band (10.100–10.150 MHz) operates on a secondary basis internationally, requiring amateurs to avoid interference with primary fixed-service users, and excludes phone emissions entirely to minimize bandwidth demands. In the IARU Region 2 plan, the lower segment from 10.100–10.130 MHz is dedicated to CW with a 200 Hz bandwidth limit and a QRP center of activity at 10.116 MHz, followed by 10.130–10.140 MHz for CW and narrow digital modes (up to 500 Hz bandwidth) used for automatic controlled digital stations (ACDS), and 10.140–10.150 MHz for general CW and digital operations up to 2.7 kHz bandwidth. U.S. regulations under FCC §97.305 authorize only RTTY and emissions across the entire band, with the ARRL plan specifying 10.100–10.130 MHz for CW, 10.130–10.140 MHz for RTTY, and 10.140–10.150 MHz for other modes, capped at 200 W PEP to protect international fixed services. In , Industry Canada follows the Radio Amateurs of Canada (RAC) plan effective June 2023, allocating 10.100–10.130 MHz to CW, 10.130–10.140 MHz to narrow-band digital modes, and 10.140–10.150 MHz to wide-band digital modes, aligning with the no-phone restriction but allowing broader digital experimentation without a specific power cap beyond the general 1,500 W limit. For the 17 m band (18.068–18.168 MHz), allocated on a primary exclusive basis, the IARU Region 2 plan divides the spectrum to support both narrowband and broadband modes, with CW and digital in the lower end transitioning to all modes higher up. Specifically, 18.068–18.095 MHz is for CW (200 Hz bandwidth, QRP center at 18.086 MHz), 18.095–18.105 MHz and 18.105–18.109 MHz for general CW and digital (500 Hz), 18.109–18.111 MHz reserved exclusively for international beacons (IBP) in CW (200 Hz), and 18.111–18.168 MHz open to all modes up to 2.7 kHz bandwidth, including ACDS, QRP at 18.130 MHz, and a global emergency center at 18.160 MHz. U.S. FCC rules permit RTTY and data from 18.068–18.110 MHz and phone/image from 18.110–18.168 MHz, mirrored in the ARRL plan with RTTY at 18.100–18.105 MHz and packet/data at 18.105–18.110 MHz, under the standard 1,500 W PEP limit. Canada's RAC plan refines this with CW up to 18.095 MHz, narrow digital to 18.105 MHz, wide digital to 18.110 MHz, and SSB from 18.110–18.168 MHz, ensuring compatibility with North American operations. The 12 m band (24.890–24.990 MHz), also primary exclusive, follows a similar progression in the IARU Region 2 plan, prioritizing CW and digital before expanding to all modes. Allocations include 24.890–24.915 MHz for CW (200 Hz, QRP center at 24.906 MHz), 24.915–24.925 MHz and 24.925–24.929 MHz for CW and digital (500 Hz, including ACDS), 24.929–24.931 MHz for exclusive IBP in CW (200 Hz), 24.931–24.940 MHz for all modes/ACDS (2.7 kHz), and 24.940–24.990 MHz for general all-modes use including SSB QRP at 24.950 MHz. In the U.S., FCC §97.305 authorizes RTTY/ from 24.890–24.930 MHz and phone/ from 24.930–24.990 MHz, with ARRL detailing RTTY at 24.920–24.925 MHz and packet at 24.925–24.930 MHz, subject to 1,500 W PEP. ’s RAC plan specifies CW from 24.890–24.910 MHz, narrow digital from 24.910–24.930 MHz, and SSB up to 24.990 MHz, reflecting alignment with FCC but with slightly adjusted CW/digital boundaries for regional harmony.
BandIARU Region 2 Sub-bands (General)U.S. Variations (FCC/ARRL)Canadian Variations (RAC)
30 m (10.100–10.150 MHz)CW: 10.100–10.130 MHz
Narrow digital/CW: 10.130–10.140 MHz
General digital/CW: 10.140–10.150 MHz (no phone)		CW: 10.100–10.130 MHz
RTTY: 10.130–10.140 MHz
Data: 10.140–10.150 MHz
200 W PEP limit		CW: 10.100–10.130 MHz
Narrow digital: 10.130–10.140 MHz
Wide digital: 10.140–10.150 MHz (no phone)
17 m (18.068–18.168 MHz)CW: 18.068–18.095 MHz
CW/digital: 18.095–18.111 MHz (IBP at 18.109–18.111 MHz)
All modes: 18.111–18.168 MHz		RTTY/data: 18.068–18.110 MHz (RTTY 18.100–18.105 MHz, packet 18.105–18.110 MHz)
Phone/image: 18.110–18.168 MHz		CW: 18.068–18.095 MHz
Narrow digital: 18.095–18.105 MHz
Wide digital: 18.105–18.110 MHz
SSB: 18.110–18.168 MHz
12 m (24.890–24.990 MHz)CW: 24.890–24.915 MHz
CW/digital: 24.915–24.931 MHz (IBP at 24.929–24.931 MHz)
All modes: 24.931–24.990 MHz		RTTY/data: 24.890–24.930 MHz (RTTY 24.920–24.925 MHz, packet 24.925–24.930 MHz)
Phone/image: 24.930–24.990 MHz		CW: 24.890–24.910 MHz
Narrow digital: 24.910–24.930 MHz
SSB: 24.930–24.990 MHz

IARU Region 3

In IARU Region 3, encompassing the Asia-Pacific area, the band plans for the WARC bands (30m, 17m, and 12m) emphasize narrowband operations to minimize interference, aligning with the secondary allocation status of the 30m band and primary status of the others. These plans, adopted in 2009, allocate continuous wave (CW) segments at the lower ends of each band, followed by provisions for digital and other narrow modes, with limited phone activity where permitted. National variations, such as those in Australia and Japan, further prioritize narrowband modes (typically ≤2-3 kHz bandwidth) to support regional propagation characteristics and international coordination. For the 30m band (10.100–10.150 MHz), the regional plan designates 10.100–10.140 MHz for CW operations and 10.140–10.150 MHz for CW and digital modes, reflecting its secondary status and restriction to emissions to avoid primary fixed service users. In , under ACMA regulations and the WIA band plan modified in 2017 to address interference between CW and SSB operators, CW is allocated to 10.100–10.120 MHz, phone (SSB) operations to 10.120–10.140 MHz, and digital modes to 10.140–10.150 MHz, making it one of few countries permitting voice modes on this band while recommending SSB stations stay above 10.120 MHz to protect CW activity. , per guidelines, restricts the band to NB Data (≤3 kHz) in 10.100–10.130 MHz and CW in 10.130–10.150 MHz, excluding phone to maintain focus. The 17m band (18.068–18.168 MHz) follows a similar regionally, with CW allocated to 18.068–18.095 MHz and all modes (≤2 kHz bandwidth) to 18.1105–18.168 MHz, including a around the international beacon at 18.110 MHz. Japan's JARL plan refines this to NB Data in 18.068–18.100 MHz, CW in 18.100–18.110 MHz, and CW with narrow modes (including limited narrowband phone/image ≤3 kHz) in 18.110–18.168 MHz, with narrowband data permitted in 18.090–18.100 MHz and 18.110–18.120 MHz for international contacts. No specific Australian variations apply beyond the regional framework, underscoring the band's primary amateur allocation for DX and regional communications. On the 12m band (24.890–24.990 MHz), the 2009 regional plan assigns CW to 24.890–24.920 MHz and all modes (≤2 kHz) to 24.940–24.990 MHz, with a segment and protection at 24.930 MHz. In , the specifies NB Data in 24.890–24.910 MHz, CW in 24.910–24.930 MHz, and CW with narrow modes (CW, phone/ ≤3 kHz) in 24.930–24.990 MHz, emphasizing ≤3 kHz bandwidth overall. These allocations support the band's role in sunspot-dependent across , with global IARU efforts promoting harmonization to facilitate cross-regional operations.

References

  1. http://www.arrl.org/wrc
  2. http://www.arrl.org/frequency-allocations
  3. https://w3kwh.com/2021/05/29/warc-use-them-or-lose-them/
  4. https://groups.arrl.org/g/ARRL-LoTW/topic/warc_bands/22790793
  5. https://www.itu.int/en/history/Pages/RadioConferences.aspx?conf=4.101
  6. https://rsgb.org/main/files/2020/04/WARC-79_RSGB-RadCom-Feb-1980.pdf
  7. https://www.iaru.org/about-us/organisation-and-history/history-of-iaru/
  8. https://www.itu.int/dms_pub/itu-r/oth/0C/08/R0C080000020001PDFE.pdf
  9. https://search.itu.int/history/HistoryDigitalCollectionDocLibrary/4.101.43.en.100.pdf
  10. https://www.iaru.org/wp-content/uploads/2020/01/Amateur-Services-Spectrum-2020_.pdf
  11. https://www.worldradiohistory.com/Archive-DX/QST/80s/QST-1985-06.pdf
  12. https://ac6v.com/history.php
  13. https://docs.fcc.gov/public/attachments/FCC-89-18A1.pdf
  14. https://www.wimo.com/en/blog/post/warc
  15. https://tech.ebu.ch/docs/techreview/trev_252-terzani.pdf
  16. https://www.federalregister.gov/documents/2005/08/10/05-15213/wrc-03-omnibus
  17. https://www.iaru-r1.org/about-us/committees-and-working-groups/iarums/
  18. http://30cw.wikidot.com/about30m
  19. https://www.iaru.org/wp-content/uploads/2021/03/IARU-WRC-23-Preliminary-Positions.pdf
  20. https://dl3tu.wordpress.com/2021/07/07/shortened-vertical-for-the-30-metre-band/
  21. http://www.arrl.org/hf-loop-antennas
  22. http://www.arrl.org/hf-vertical
  23. https://vkradioamateurs.org/30m-band-plan-review/
  24. https://www.iaru.org/wp-content/uploads/2020/01/R2-Band-Plan-2016.pdf
  25. https://transition.fcc.gov/oet/spectrum/table/fcctable.pdf
  26. https://www.ecfr.gov/current/title-47/chapter-I/subchapter-D/part-97
  27. https://www.dxengineering.com/search/part-type/wire-antennas
  28. http://www.arrl.org/band-plan-1
  29. https://www.spectrumwiki.com/wiki/display.aspx?From=disp&f=24650001
  30. https://www.ncdxf.org/beacon/beaconlocations.html
  31. https://www.wimo.com/en/beacon-monitoring
  32. https://rsgb.org/main/files/2024/10/RSGBs-Worldwide-List-of-HF-Beacons.pdf
  33. https://www.dxengineering.com/search/part-type/wire-antennas/wire-antenna-band/12-meters
  34. https://www.qsl.net/sterling/Activities/20120307_JT65-HF/Band_Info.pdf
  35. https://www.eham.net/article/9001
  36. https://www.space.com/astronomy/sun/where-are-we-in-the-current-11-year-solar-cycle
  37. https://www.iaru-r1.org/wp-content/uploads/2019/08/hf_r1_bandplan.pdf
  38. https://www.la1b.no/wp-content/uploads/2025/06/IARU-Ethics-and-Operating-Procedures-for-the-Radio-Amateur-4th-Ed-v4.0.25_A.pdf
  39. https://www.law.cornell.edu/cfr/text/47/97.305
  40. https://www.iaru.org/wp-content/uploads/2020/01/R3-004-IARU-Region-3-Bandplan-rev.2.pdf
  41. https://www.iaru.org/wp-content/uploads/2021/01/Resolutions-and-Policies-Oct2020.pdf
  42. https://www.arrl.org/frequency-allocations
  43. https://www.itu.int/pub/R-REG-RR-2020
  44. https://www.law.cornell.edu/cfr/text/47/97.313
  45. https://www.jarl.org/English/6_Band_Plan/JapaneseAmateurBandplans20200421.pdf
  46. https://docdb.cept.org/download/2ae38a89-e58a/TR6101.pdf
  47. https://www.iaru-r1.org/wp-content/uploads/2019/08/hf_managers_handbook_v9.pdf
  48. https://www.iaru-r2.org/wp-content/uploads/2020/02/IARU-Region-2-Band-plan.pdf
  49. https://www.ecfr.gov/current/title-47/chapter-I/subchapter-D/part-97/subpart-D/section-97.313
  50. https://www.arrl.org/band-plan-1
  51. https://www.ecfr.gov/current/title-47/chapter-I/subchapter-D/part-97/subpart-D/section-97.305
  52. https://www.rac.ca/rac-0-30-mhz-band-plan/
  53. https://www.myerseng.com/Publico/IARU-Region-III-Band-Plan.pdf
  54. https://www.iaru-r3.org/
  55. https://www.wia.org.au/members/bandplans/data/
  56. https://www.iaru.org/
Add your contribution
Related Hubs
User Avatar
No comments yet.