Hubbry Logo
EMD F40CEMD F40CMain
Open search
EMD F40C
Community hub
EMD F40C
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
EMD F40C
EMD F40C
EMD F40C
View on Wikipedia
from Wikipedia
EMD F40C
Metra F40C No. 605
Type and origin
Power typeDiesel-electric
BuilderGeneral Motors Electro-Motive Division (EMD)
Build dateMarch – May 1974
Total produced15
Specifications
Configuration:
​
 • AARC-C
 • UICCo’Co’
Gauge4 ft 8+1⁄2 in (1,435 mm) standard gauge
Length68 ft 10 in (20.98 m)
Width10 ft 4 in (3.15 m)
Height15 ft 7.5 in (4.763 m)
Loco weight364,000 lb (165,000 kg)
Prime moverEMD 16-645E3B
Engine typeV16 diesel
Cylinders16
Performance figures
Power output3,200 hp (2,390 kW)
Career
OperatorsMilwaukee Road, Metra
LocaleChicago, Illinois, and its northwest suburbs
DispositionOne preserved, one in storage, remainder scrapped

The EMD F40C is a 6-axle 3,200 horsepower (2.4 MW) diesel-electric locomotive built by General Motors Electro-Motive Division in 1974 for commuter service in Chicago. EMD only built 15 locomotives; the decline of the 6-axle design for passenger service led to the adoption of the 4-axle EMD F40PH as the standard passenger locomotive in the United States.[1] Along with a small fleet of HEP-equipped EMD SD70MAC locomotives operating on the Alaska Railroad, the F40Cs were the last six-axle passenger locomotives in daily service in mainland North America until the delivery of Metra's first SD70MACH in 2022.

As of March 2022, all but one of the F40Cs has been retired, though none are operating. They were replaced by the MPI MP36PH-3S in 2003–2004. Locomotives 600-609 and 613 were the first to be retired in 2003 and had their road numbers unregistered with the Federal Railroad Administration. They were all retired before 2007. No. 610 was unregistered in 2004 and was sent to National Railway Equipment in Dixmoor, Illinois. It was scrapped on September 24, 2020.[2] The only F40Cs that remain are Nos. 611 and 614. No. 611 is currently stored in Metra's Western Avenue rail yard, while No. 614 has been preserved and has been sent to the Illinois Railway Museum for restoration.

Design

[edit]

The F40C is derived from the EMD SDP40F; besides the shorter length, the primary difference between the two is the substitution of a 500-kilowatt (670 hp) HEP generator for the SDP40F's twin steam generators. It is powered by a 16 cylinder EMD 645E3B, producing 3,200 horsepower (2,390 kW). It uses the same frame as the EMD SD40-2, giving it an overall length of 68 feet 10 inches (20.98 m).[3]

History

[edit]

In the early 1970s, the Milwaukee Road operated two commuter rail lines in Chicago: the Milwaukee District North Line to Fox Lake via the Canadian Pacific's C&M Subdivision, and the Milwaukee District West Line to Elgin via the CP's Elgin Subdivision. The operation of these lines was subsidized by local transit agencies. In 1974, two local agencies, the North West Suburban Mass Transit District and the North Suburban Mass Transit District funded the acquisition of 15 F40Cs for use on the Milwaukee lines.[4] The locomotives were numbered 40-54, and were passed to Metra on the latter's creation in the 1980s, being renumbered to 600-614, but they continued to operate on the ex-Milwaukee lines.[5]

The F40Cs were withdrawn from regular service with the arrival of new MPI MP36PH-3S locomotives in 2003–2004.[6][7] Twelve were sold to locomotive leasing corporations Helm Leasing and one to National Railway Equipment. The remaining two, Nos. 611 and 614, were retained and stored at Western Avenue railyard. Both were reactivated in January 2005 after problems with the MPI MP36PH-3Ss.[8] In 2005, Kansas City Southern signed a contract with Helm Leasing to use 12 for nine months.[9]

In the spring of 2009, Nos. 611 and 614 were returned to revenue service on both of Metra's ex-Milwaukee Road commuter lines. This was done while the oldest units in Metra's EMD F40PH fleet were being rebuilt. Towards the end of 2016, with many F40PH-2 and F40PHM-2 locomotives being sent out for rebuild, there was an increased likelihood that 611 and 614 would be put back into service, but this never came to be.

Currently, No. 611 is left to fill the roles of locomotives that have broken down or are being rebuilt. Despite this, it has not seen regular service since 2012. Metra at one time did have plans to rebuild both remaining F40Cs to test new prime movers and control packages, but due to a lack of bidders, this plan has been put on hold indefinitely.[10] No. 611 continues to remain stored in Metra's Western Avenue rail yard, while No. 614 was donated by Metra to the Illinois Railway Museum in February 2025. Plans call for No. 614 to eventually be restored back to operating condition.[11]

Notes

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

EMD F40C

View on Grokipedia
from Grokipedia
The EMD F40C is a six-axle, 3,200-horsepower (2.4 MW) diesel-electric built by ' Electro-Motive Division (EMD) in 1974 as a specialized variant for service. Unlike the related SDP40F , which included a for heating cars, the F40C substituted a 500 kW (HEP) alternator to supply electricity for lighting, , and other amenities, marking an early adoption of this feature in EMD's cowl-unit designs. Only 15 units were produced between March and May 1974, all delivered to the for its Chicago-area suburban operations on the Northwest and North Suburban lines. These locomotives, numbered 40 through 54 and initially painted in a blue-and-white scheme, measured 68 feet 10 inches in length, weighed 364,000 pounds, and were powered by a 16-cylinder 645E3 turbocharged prime mover coupled to an AR10 main generator and six D77 traction motors. They rode on standard high-adhesion HT-C trucks with a 59:15 gear ratio, enabling a top speed of 95 mph and a starting of 92,000 pounds, while featuring and a 3,200-gallon capacity for extended runs. The F40Cs incorporated corrugated stainless-steel side panels for durability and avoided the truck-related issues that plagued the SDP40F, making them reliable for push-pull commuter duties without dynamic brakes in trailing positions. Following the creation of in 1977 from the merger of the funding transit districts, the fleet was repainted in 's distinctive colors and continued serving routes from to Elgin, Fox Lake, and other suburbs for nearly three decades. By the early , they were phased out in favor of newer non-streamlined units like the MP36PH-3S, with most scrapped or retired; No. 611 remains in storage at 's Western Avenue yard as a parts source, while No. 614 was donated to the Illinois Railway Museum in 2025 for preservation and static display.

Development and production

Origins and requirements

In the early , U.S. services faced acute challenges from aging equipment and the financial distress of private railroads, which increasingly sought to curtail unprofitable operations. The () exemplified these pressures, operating two Chicago-area commuter lines—the to Fox Lake and the West Line to Elgin—while burdened by overall system losses that threatened service abandonment without external support. These lines relied on outdated steam-heated locomotives, which were inefficient, maintenance-intensive, and incompatible with the growing demand for modern, electrically heated passenger cars. To avert discontinuation, local public agencies stepped in with targeted funding. The Northwest Suburban Mass Transit District (NWSMTD) financed 13 units for the West Line, while the North Suburban Mass Transit District (NSMTD, also known as Nortran) covered two for the North Line, drawing on federal and state grants to subsidize capital improvements for the Milwaukee Road's commuter operations. This intervention marked an early example of public-private partnerships in preserving suburban rail service amid the railroad's broader fiscal crisis. The required locomotives had to address needs for dense commuter runs: a 3,200 horsepower prime mover to pull lengthy consists of up to 10-12 cars, a 500 kW (HEP) to supply , , and for passengers, and a C-C truck setup with HT-C hollow-bolster for superior stability and on varied trackage. The drew directly from EMD's SDP40F passenger locomotive but eliminated the , substituting the HEP system to better suit electric-dependent train consists and avoid the SDP40F's known track-handling issues. Responding to the urgent replacement timeline, the transit districts ordered 15 F40C units from ' Electro-Motive Division in late 1973, with production and deliveries beginning in March 1974 to integrate into service by spring.

Construction and deliveries

The EMD F40C locomotives were built at the Electro-Motive Division's plant in LaGrange, , during a concentrated production run from March to May 1974. A total of 15 units were manufactured exclusively for commuter service, reflecting the specialized order from the . These locomotives were initially numbered 40 through 54 upon delivery and were later renumbered to 600 through 614 during their service under . Production employed EMD's established methods for integrating the 16-cylinder 645E3B prime mover, which formed the core of the locomotive's 3,200 horsepower diesel-electric powerplant. A distinctive feature of the F40C's construction was the integration of a 500 kW (HEP) during final assembly stages, replacing the steam generators found on related models like the SDP40F and enabling direct electrical supply for passenger car heating, , and . Each unit underwent rigorous testing protocols tailored to commuter operations, including load simulations for frequent starts, stops, and HEP demands to verify performance under high-cycle service conditions. All 15 locomotives were delivered to the by June 1974, with funding provided by the North Suburban Mass Transit District and Northwest Suburban Mass Transit District to support Chicago-area . Upon arrival, they received initial assignments to the –Elgin and Chicago–Fox Lake routes, where they began hauling push-pull commuter trains out of .

Technical description

Prime mover and power generation

The EMD F40C locomotive is powered by a 16-645E3B prime mover, a V16 developed by the Electro-Motive Division (EMD) of . This turbocharged engine features a bore of 8.5 inches and a of 10 inches, operating at a maximum speed of 900 rpm and producing 3,200 horsepower (2,390 kW). Water-cooled components, including the cylinders and , ensure reliable performance under the demands of passenger service, where the engine must sustain both propulsion and loads. The drives an EMD AR10 main generator, a direct-current (DC) unit that converts mechanical power into electrical energy for the traction system. This generator supplies variable voltage and current to the locomotive's traction motors, enabling smooth acceleration and speed control across operational ranges. Complementing the setup is a dedicated () alternator, rated at 500 kW and producing 480 V AC at 60 Hz, which is mechanically coupled to the . The system eliminates the need for separate generators, providing electrical power for car heating, lighting, , and other amenities directly from the locomotive's . Power is distributed to six EMD D77 DC series traction motors, one per on the C-C arrangement, supporting the locomotive's six- configuration for enhanced in commuter operations. These motors operate in full-field mode for starting to maximize and transition to weak-field operation at higher speeds for . The fuel system includes a 3,200-gallon capacity tank, allowing extended service intervals typical for regional passenger routes.

Structure and dimensions

The EMD F40C featured overall dimensions of 68 ft 10 in (20.98 m) in over the couplers, 10 ft 4 in (3.15 m) in width, and 15 ft 7.5 in (4.76 m) in from the top of the rail to the top of the cab, with a service weight of approximately 364,000 lb (165,000 kg). The employed a body construction utilizing high-strength steel for the carbody, providing a full-width hood that enhanced crew protection compared to traditional hood-unit designs. grids were integrated into the roof structure, visible as characteristic blisters, while anti-climber couplers were fitted at both ends to improve safety in collisions. The body included corrugated side panels for durability and aesthetic consistency with contemporary passenger equipment. It rode on two EMD HT-C trucks in a C-C arrangement, each with three axles, a 13 ft 7 in (4.14 m) wheelbase, 40 in (1,016 mm) wheels equipped with roller bearings, and primary suspension provided by coil springs to handle the demands of commuter service. The cab was a centralized control design with dual operator controls to facilitate push-pull operations, featuring notched windshields for improved visibility during commuter runs and an integrated HVAC system for crew comfort. Compared to the SDP40F, the F40C incorporated adaptations for by removing the equipment, which allowed for a more streamlined rear section and reduced overall length by nearly 4 ft (1.2 ) to better suit platform clearances in urban settings.

Performance characteristics

The EMD F40C provided robust tailored to the demands of heavy commuter train operations, with a starting value of 92,000 lbf (409 kN) at 25% to ensure strong acceleration from stations. Its continuous was rated at 82,100 lbf (365 kN) at 6.6 mph, allowing sustained on typical suburban routes with varying grades and loads. This configuration, combined with a gear ratio of 59:15, supported a top speed of 95 mph (153 km/h), optimized for efficient travel between frequent stops in urban commuter service. The locomotive's braking systems enhanced its suitability for passenger operations, incorporating to convert into heat via onboard resistors for controlled deceleration without excessive reliance on air brakes. These air brakes complied with (AAR) standards, providing reliable stopping power for train consists up to eight cars. The setup offered efficient energy dissipation akin to regenerative systems in effect, reducing wear on mechanical components during repeated stop-and-go cycles. Fuel efficiency for the F40C varied with operational conditions but typically ranged from 2 to 3 (0.85 to 1.27 km/L) under load in commuter service, impacted by the continuous draw of (HEP) for lighting, heating, and in passenger cars. With a capacity of 3,200 gallons, this allowed for extended runs without frequent refueling, though HEP demands could increase consumption by up to 20-30% compared to non-passenger duties. In comparison to earlier E-unit locomotives, the F40C offered superior reliability due to its modern design and six-axle configuration, which improved and reduced risks associated with high-speed hauling. It was generally less powerful per axle than later four-axle F40PH variants in high-speed applications but excelled in hauling heavier bi-level commuter consists. The F40C marked the last production of a six-axle dedicated diesel locomotive in mainland service until 2022, when newer six-axle models reemerged for .

Operational history

Milwaukee Road era

The EMD F40C locomotives entered service with the Chicago, Milwaukee, St. Paul and Pacific Railroad () in 1974, primarily on its commuter lines out of . These units, numbered 40 through 54 and acquired through the Northwest Suburban Mass Transit District and North Suburban Mass Transit District, operated on the North Line to , and the West Line to , hauling consists typically comprising 4 to 8 Budd-built gallery cars. In daily operations, the F40Cs were integrated into push-pull service with these bi-level gallery cars, leveraging their 500 kW (HEP) alternators to supply all-electric heating, lighting, and ventilation for the consists. This setup supported peak-hour rush services, with trains making multiple round trips from Chicago suburbs, replacing older E-unit locomotives and enhancing efficiency on the electrified-turned-diesel routes. The locomotives faced operational challenges, including elevated fuel costs exacerbated by the 1973 and 1979 oil crises, which strained the Milwaukee Road's finances amid rising diesel prices and contributed to broader maintenance demands on the turbocharged 16-645E3 prime movers. Frequent shop attention was required for engine-related issues, such as turbocharger reliability, amid the railroad's deteriorating infrastructure. Service persisted through the Milwaukee Road's bankruptcy filing in December 1977, with the F40Cs handling growing commuter loads on the subsidized lines despite the carrier's financial turmoil and route rationalizations. The units remained in active use into the early , supporting operations until the Regional Transportation Authority's restructuring shifted oversight, marking the end of direct control.

Metra service

In 1982, as part of the Regional Transportation Authority's (RTA) consolidation of Chicago-area services amid the 's bankruptcy proceedings, the 15 EMD F40C locomotives were transferred to the newly established Northeast Regional Railroad (NIRC), the RTA's division that later rebranded as . The units, previously numbered 40–54 by the , were renumbered 600–614 and assigned names honoring communities and individuals, such as 600 Village of and 614 Edward F. Brabec. This transfer ensured continuity of service on the former lines without interruption, integrating the F40Cs into 's growing fleet. During the mid-1980s, undertook significant overhauls of the F40Cs to extend their service life and enhance reliability for commuter operations. These upgrades included engine rebuilds of the 16-645E3 prime movers, which maintained the locomotives' 3,200 horsepower output while improving efficiency and durability. Additional modifications featured improved cab signaling systems for better train control and safety, serving as precursors to modern implementations. The locomotives were also repainted in 's distinctive blue-and-yellow livery, replacing the original scheme. The upgraded F40Cs played a central role in Metra's operations on the Milwaukee District lines, serving routes from to Elgin and Fox Lake through the 1990s and into the early 2000s. They typically operated in push-pull configurations with cab control cars, enabling efficient bidirectional service without turning the locomotives at terminals, and routinely handled peak-hour rush trains consisting of up to 12 cars to accommodate high commuter volumes. This configuration maximized capacity on the busy suburban corridors, supporting Metra's expansion amid growing ridership in the . Facing locomotive shortages, briefly reactivated select F40Cs in the mid-2000s. Unit 611 returned to service in January 2005 following reliability issues with newer MPI MP36PH-3S locomotives, providing temporary relief on Milwaukee District runs. Similarly, both 611 and 614 were brought back online in spring to cover gaps during rebuilds of 's primary F40PH fleet, operating until their permanent retirement in 2012. Following retirement, units 611 and 614 were stored at 's Western Avenue yard as parts sources until No. 614 was donated to the Illinois Railway Museum in February 2025 for preservation. These reactivations underscored the F40Cs' robustness, allowing them to contribute to 's service even after most of the class had been retired in 2004.

Withdrawal and preservation

Retirement process

The retirement of Metra's fleet of 15 EMD F40C locomotives began in the early 2000s, driven by the arrival of 27 new Industries MP36PH-3S units between 2003 and 2004. These modern, four-axle locomotives offered improved , lower emissions, and reduced requirements compared to the 30-year-old F40Cs, which were powered by the aging EMD 16-645E3 prime mover. The transition addressed Metra's need for reliable power amid growing commuter demands, with the F40Cs phased out progressively as the MP36PH-3S entered service. By 2004, the majority of the F40Cs had been withdrawn from due to escalating repair costs and the locomotives' inability to meet evolving environmental regulations without significant upgrades. Although most units were sidelined by 2004, two F40Cs—Nos. 611 and 614—underwent temporary reactivation in to fill gaps during the overhaul of Metra's primary F40PH fleet. This brief return to service extended their operational life until 2012, when both were permanently retired following unsuccessful bids for comprehensive refurbishment. The reactivations provided critical backup during peak maintenance periods but ultimately accelerated the recognition of the F40Cs' outdated design, leading to full fleet disposal. Thirteen of the 15 F40C units were scrapped between 2004 and 2020, primarily at National Railway Equipment's facility in Dixmoor, , as parts availability for the 645-series engines diminished and economic pressures favored disposal over reconstruction; the last unit scrapped was No. 610 in September 2020. The scrapping process was influenced by federal initiatives promoting cleaner passenger rail technologies, which funded Metra's shift to compliant alternatives. The F40C's withdrawal represented the end of six-axle passenger locomotive classes in mainland North American commuter service, a status that persisted until retired its similar units in September 2024.

Preserved examples

The two surviving examples of the EMD F40C locomotive highlight its rarity from the original production run of 15 built in 1974. Metra F40C No. 614, originally Milwaukee Road No. 54, was donated to the Illinois Railway Museum in February 2025, marking it as the sole example designated for long-term preservation. This unit, stored in Chicago prior to donation, represents the last intact survivor from the initial build and embodies the locomotive's design as a six-axle, cowl-unit variant optimized for commuter service with head-end power generation. The museum has initiated operational restoration efforts, including replacement of components such as the turbocharger, aftercoolers, radiators, and diode banks, with the locomotive already participating in short revenue movements on museum trackage by mid-2025. The second surviving unit, F40C No. 611 (ex-Milwaukee Road No. 51), remains in storage at 's Western Avenue Coach Yard in as of November 2025. Retained on 's roster primarily as a potential parts donor, it has not been slated for active preservation or display, though its condition allows for possible future relocation to a or static exhibit. No other F40C examples exist in preservation, underscoring the type's scarcity following widespread scrapping after retirement. Preservation initiatives, led by institutions like the Illinois Railway Museum, play a crucial role in documenting 1970s-era technology, particularly the F40C's integration of a 16-645E3 prime mover with and systems for passenger comfort. These efforts ensure the locomotive's mechanical and historical details—such as its stainless-steel and high-short-hood configuration—are maintained for educational purposes, with no operational F40C variants preserved at other sites. The preserved F40Cs symbolize the transition in North American railroading from steam-heated passenger cars to fully electric head-end powered trains during the mid-1970s, facilitating reliable suburban service amid the decline of legacy equipment. Their legacy extends to communities, where examples like No. 614 have been extensively documented in and historical studies, capturing the units' distinctive appearance and role in Chicago-area operations.
Add your contribution
Related Hubs
User Avatar
No comments yet.