Community hub
0 subscribers8 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to EMD FP45.
Nothing was collected or created yet.
EMD FP45
View on Wikipediafrom Wikipedia
 | This article needs additional citations for verification. (June 2007) |
| EMD FP45 | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Santa Fe #108 at the Southern California Railway Museum | |||||||||||||||||||
| |||||||||||||||||||
| |||||||||||||||||||
| |||||||||||||||||||
| |||||||||||||||||||
The EMD FP45 is a cowl unit type of C-C diesel locomotive produced in the United States by General Motors Electro-Motive Division (EMD). It was produced beginning in 1967 at the request of the Atchison, Topeka and Santa Fe Railway, which did not want its prestigious Super Chief/El Capitan and other passenger trains pulled by freight style hood unit locomotives, which have external walkways.
History and development
[edit]The EMD SDP45 performed well in passenger service, but the Santa Fe Railway felt its utilitarian appearance was unsuitable for its passenger trains. EMD therefore designed a lightweight "cowl" body to cover the locomotive, though it did not, as in earlier cab units, provide any structural strength, which remained in the frame. The cowl provided sleeker looks, better aerodynamics at speed, and allowed the crew to enter the engine compartment en route for diagnostics and maintenance. Final drive gear ratio for passenger service was 57:20.[1]
Orders
[edit]Santa Fe purchased nine of the locomotives (road numbers 100 through 108), and the Milwaukee Road bought five for its passenger service (road numbers 1 through 5). The Milwaukee Road units were delivered without dynamic brakes. Reportedly, Illinois Central Railroad was considering an order for five FP45s as well (EMD order #5742, serial #s 34952–34956), but canceled it. Such low production was feasible and profitable for EMD since the locomotive was fundamentally just a re-clothed SDP45. Power, as in the SDP45, was from a V20 645E3 engine (or prime mover) developing 3,600 hp (2,680 kW).
Derivatives
[edit].jpg)
A freight-only derivative, the EMD F45, was sold in greater numbers (86) to Santa Fe, the Great Northern Railway, and the Burlington Northern Railroad. Amtrak purchased a similar passenger locomotive based on the 3,000 hp (2,240 kW) SD40-2, the SDP40F. After a series of derailments and their subsequent withdrawal, Amtrak traded 18 units to the Santa Fe, where they were converted for freight use. The converted locomotives were designated as SDF40-2.
The last three F45s in service were on the Montana Rail Link and the New York, Susquehanna and Western Railway in the northern and northeastern United States. These units were taken out of service in 2006 for the MRL and 2010 for the NYSW. Three are known to survive, with one located at the Izaak Walton Inn, now converted into a lodge. [citation needed]
Rebuilds
[edit]Between April 1980 and December 1982, Santa Fe's San Bernardino shops rebuilt eight FP45s 5940–5943, 5945–5948. They emerged as 5990–5993, 5995–5998, and were redesignated SDFP45s. The 5944 was retired in September 1981 on account of a wreck at Toland, Texas. Electrically they were upgraded to SD45-2 standards. Mechanically, they were re-geared from 59:18 to 60:17, reducing their top speed from 89 to 83 mph (143 to 134 km/h).
In the mid-1980s Santa Fe again re-geared them - this time to 62:15 for 71 mph (114 km/h).
Withdrawal
[edit]Milwaukee Road's FP45s were all sold for scrap in 1981 and 1984. Santa Fe SDFP45 No. 5944 was wrecked in 1981, Santa Fe SDFP45 No. 96 was wrecked in 1994 on Cajon Pass. While No. 91 was sold to the Wisconsin Central in January 1995, becoming their #6652 and the rest stayed in service right up until the BNSF merger in September of 1995, and were retired shortly after the merger.
Preservation
[edit]Those that were not wrecked in service, or sold to other railroads, are on display in museums:
- Santa Fe 90: was donated to the Oklahoma Railway Museum in Oklahoma City in a non-operational state. #90 was the last FP45 donated by the Santa Fe and had resided on a RIP track for two years before being delivered to the museum.
- Santa Fe 92: was donated to the Illinois Railway Museum in Union, Illinois. In 2010, volunteers restored 92's control stand so that it could control other locomotives via MU. The locomotive was moved to National Railway Equipment in Silvis, IL during July 2017, where a replacement 20-645E3 engine, AR10 alternator, and a WBO air compressor (all purchased by the museum) were installed. This made the locomotive fully operational for the first time since at least 1997.
- Santa Fe 93: preserved at the Great Plains Transportation Museum in Wichita, Kansas. It was delivered in June 1999 and has undergone cosmetic restoration. Another cosmetic restoration is underway.[2][3]
- Santa Fe 95: preserved at the Western America Railroad Museum in Barstow, California.
- Santa Fe 97: preserved at the Museum of the American Railroad in Frisco, Texas. Currently under restoration, will be renumbered back to Santa Fe 107.
- Santa Fe 108: was donated in operating condition minus the cab's air conditioner to the Southern California Railway Museum at Perris, California. This locomotive has the distinction of being the last passenger locomotive ever purchased by Santa Fe. Its restoration was completed in October, 2018 and it is now in operating condition for the first time since 2012.[4]
See also
[edit]- EMD SDP40F - A derivative of the FP45 produced for Amtrak
- GE U30CG - A cowl-bodied passenger variant of the GE U30C, also ordered by the ATSF
References
[edit]- ^ "Santa Fe F45's". atsf.railfan.net. Retrieved 3 August 2021.
- ^ KWCH Staff (2023-09-25). "Actor leading Wichita museum's effort to restore Santa Fe locomotive". www.kwch.com. Retrieved 2023-09-26.
- ^ Franz, Justin (2025-08-22). "Santa Fe FP45 to be Restored". Railfan & Railroad Magazine. Retrieved 2025-08-23.
- ^ Busse, Dave (8 October 2018). "Santa Fe 'Warbonnet' FP45 comes alive in California". Trains.com. Perris, CA: Trains Newswire. Archived from the original on 10 October 2018. Retrieved 12 February 2024.
- Moran, Miles (1975). "And Passenger Service Too". Railroad Modeler. 5 (8): 40–47.
- Duke, Donald (1997). Santa Fe: The Railroad Gateway to the American West, Volume Two. San Marino, CA: Golden West Books. ISBN 0-87095-110-6.
- Graham-White, Sean (2002). Electro-Motive Division's Classic Cowl Units - A Color Pictorial. La Mirada, CA: Four Ways West. ISBN 1-885614-53-5.
- "5700 Order Numbers". The UNofficial EMD Homepage. Retrieved 2009-06-21.
External links
[edit]
Wikimedia Commons has media related to EMD FP45 locomotives.
- Additional photos, specifications and information on the surviving FP45 locomotives-by Jim Fuhrman
- Santa Fe 92 at IRM as preserved at IRM
- Preservation project for Santa Fe FP-45 93 At the Great Plains Transportation Museum.
EMD FP45
View on Grokipediafrom Grokipedia
Design and specifications
Overview
The EMD FP45 is a cowl unit C-C diesel-electric locomotive built by the Electro-Motive Division of General Motors for passenger service.[1] It features a full-width body design that houses a steam generator for heating passenger cars, distinguishing it from freight-oriented models.[1] A total of 14 units were produced between 1967 and 1968.[2] The primary buyers were the Atchison, Topeka and Santa Fe Railway, which acquired 9 units numbered 100–108, and the Chicago, Milwaukee, St. Paul and Pacific Railroad, which purchased 5 units numbered 1–5.[1] Santa Fe units measured 72 ft 4 in (22.05 m) in length with a wheelbase of 45 ft (13.72 m), while Milwaukee Road units were 70 ft 8 in (21.54 m); both used standard gauge of 4 ft 8½ in (1,435 mm).[2][4][1] It represented a sleeker, more aerodynamic evolution of the earlier SDP45 design.[1]Technical features
The EMD FP45 was powered by a turbocharged V20 diesel engine designated the 20-645E3, which produced 3,600 horsepower (2,680 kW) at a governed speed of 900 rpm.[1] This prime mover, a two-stroke design with a bore of 9.02 inches and stroke of 10 inches, represented an evolution from earlier EMD 645 series engines, incorporating turbocharging for enhanced power density while maintaining reliability in high-speed passenger applications.[5] The locomotive's electrical transmission system utilized six GM D77 series DC traction motors, one per axle on its C-C (six-axle) truck arrangement, delivering power through a main generator rated at approximately 3,600 horsepower.[6] Santa Fe units had a gear ratio of 57:20 as built, enabling top speeds of 65 to 90 mph (105 to 145 km/h) suitable for passenger train operations, while configurations varied by operator.[6][1] Dynamic braking was integrated into the D77 motors, providing extended-range tapered control up to 31 mph for efficient speed management on descents without excessive wear on mechanical brakes.[6] Adapted for passenger service, the FP45 included a steam generator capable of producing heat for train cars, a feature absent in its freight-oriented F45 counterpart.[1] The full-width cowl unit body design enhanced crew comfort with spacious interiors, while also offering improved aerodynamics for reduced drag at highway speeds compared to traditional carbody units.[4][1] This cowl configuration, with a non-load-bearing body over a robust frame, further simplified maintenance by allowing easier access to components without compromising structural integrity.[4] The locomotive weighed 360,000 to 399,000 pounds (163 to 181 metric tons) in operating condition depending on configuration and operator, distributing load across its six axles for stability on high-speed runs.[6][1] Fuel capacity was 3,200 to 5,000 US gallons (12,100 to 18,900 liters) depending on the operator.[6][1] Overall, these features stemmed from the FP45's foundation on the SD45 platform, which prioritized high-horsepower output for demanding service.[1]Development and production
Background and development
In the mid-1960s, as passenger rail service in the United States faced significant decline due to increasing competition from automobiles and airlines, several railroads sought updated locomotives to maintain their flagship trains while transitioning toward potential nationalization under Amtrak. Electro-Motive Division (EMD) conceived the FP45 in 1967 as a specialized response to these needs, aiming to provide reliable passenger power amid shrinking demand for such equipment.[1][4] The Atchison, Topeka and Santa Fe Railway played a pivotal role in the locomotive's development, requesting a design to replace its aging fleet of F-units and other older models on prestigious routes like the Super Chief and El Capitan. Santa Fe emphasized aesthetic appeal and operational reliability, prioritizing a passenger-oriented appearance over the utilitarian designs favored for freight service, which aligned with their commitment to high-profile streamliner operations.[1][4] The FP45 evolved directly from the SDP45 introduced in 1966, incorporating a streamlined full-width cowl body to enhance aerodynamics and reduce drag compared to the more boxy predecessor, while retaining core mechanical elements for passenger compatibility. This design shift marked EMD's move away from traditional carbody structures toward more efficient cowl units.[1][4] EMD's development strategy focused on cost efficiency for low-volume production, adapting proven components from the SD45 freight locomotive—including its power output—to create a versatile platform with a load-bearing frame and non-load-bearing body for easier maintenance and customization. The Illinois Central Railroad reportedly considered an order for five FP45 units (EMD order #5742) but canceled it around 1969.[7]Orders and production
The EMD FP45 locomotives were manufactured from December 1967 to December 1968 at the Electro-Motive Division's assembly plant in LaGrange, Illinois.[1][8] A total of 14 units were produced, reflecting the limited demand amid the declining passenger rail market in the late 1960s.[1] The Atchison, Topeka and Santa Fe Railway placed the initial order for nine FP45s (road numbers 100–108), delivered in December 1967 under order number 5731.[1] This order stemmed from Santa Fe's commitment to enhancing its flagship passenger services like the Super Chief and El Capitan, prompting custom features such as steam generators for train heating, a wide-nose two-window cab, and gearing optimized for high passenger speeds exceeding 90 mph.[9] The Milwaukee Road followed with an order for five units (road numbers 1–5), delivered in December 1968 under order number 7121, intended to replace aging E-units in passenger duties.[1] These units featured minor variations, including the omission of dynamic brakes to reduce weight and cost for lighter passenger consists.[9] The overall production was constrained by the shrinking market for passenger locomotives, with only these two railroads purchasing the model.[1] The creation of Amtrak in 1971 accelerated the end of private intercity passenger operations, leading to cancellations of planned orders—including an additional five FP45s for the Milwaukee Road—and prompting surviving units to be repurposed for freight service. The Illinois Central's planned order was canceled earlier, around 1969.[7][10]Operational history
Passenger service
The Atchison, Topeka and Santa Fe Railway introduced nine EMD FP45 locomotives, numbered 100–108, into passenger service in 1967, each delivering 3,600 horsepower from a 20-cylinder 645E3 engine and equipped with a rear-mounted steam generator for heating passenger cars. These units were primarily assigned to the flagship Super Chief and El Capitan trains, operating over the 2,227-mile route from Chicago to Los Angeles, where their high power output supported sustained speeds suitable for long-haul travel.[3][11][2] Painted in the railroad's signature red and silver warbonnet livery, the FP45s were frequently run in matched sets of four to six units to maintain a streamlined aesthetic and provide the necessary traction for heavy consists, including dome cars and sleepers. Outside of peak summer periods, when demand required separate sections, the Super Chief and El Capitan typically operated as a combined train powered by these locomotives, showcasing their reliability across the arid Southwest desert routes despite challenging grades and temperatures.[3][12][1] The Chicago, Milwaukee, St. Paul and Pacific Railroad (Milwaukee Road) placed five FP45 units, numbered 1–5 and also rated at 3,600 horsepower with steam generators, into service in 1969 for Midwest routes, including the streamlined Hiawatha between Chicago and the Twin Cities. Lacking dynamic brakes to prioritize passenger accommodations, these locomotives handled typical consists of coaches and parlor cars effectively until the railroad discontinued intercity passenger operations in early 1971.[13][14][1] The FP45's design proved well-suited for extended passenger runs, with the steam generator enabling seamless integration into train consists requiring onboard heating and the robust power plant ensuring consistent performance over distances up to 400 miles per trip. However, early operations revealed fuel efficiency drawbacks from the 20-cylinder engine's higher consumption relative to 16-cylinder alternatives, particularly at lower speeds or idle, which were later addressed through crankshaft reinforcements and other engine refinements starting around 1972.[1][15][16] With the formation of Amtrak in May 1971, both the Santa Fe and Milwaukee Road returned their FP45 fleets to freight duties, concluding the locomotives' era of dedicated passenger service after just four years of operation.[3][13]Freight conversion and use
Following the formation of Amtrak in 1971, the Atchison, Topeka and Santa Fe Railway converted its nine FP45 locomotives from passenger to freight service by removing the steam generators and regearing them for lower speeds and heavier loads suitable for general freight operations.[1] These units, originally numbered 100–108, were renumbered into the 5900 series (specifically 5940–5948) as early as March 1970 in anticipation of the shift, allowing them to join the railroad's freight pool.[3] On the Santa Fe and its successor, the Burlington Northern Santa Fe (BNSF) after the 1995 merger, the converted FP45s primarily handled general freight on transcontinental routes, including high-priority intermodal and manifest trains during the 1970s and 1980s.[1] They provided reliable 3,600 horsepower output from the 20-cylinder 645E3 engine, contributing to hauls across the railroad's extensive western network until the 1990s, when many were sidelined in favor of newer power.[1] The Milwaukee Road's five FP45s (numbered 1–5), acquired in 1968, saw a similarly brief transition to freight after Amtrak assumed passenger duties in 1971, with steam generators removed to repurpose them for regional freight assignments in the Midwest during the 1970s.[1] Their freight career was short-lived amid the railroad's financial struggles, lasting into the early 1980s until bankruptcy proceedings led to their disposal, with units like No. 2 documented working yards and locals as late as 1979.[14] Post-merger with BNSF, surplus Santa Fe FP45s entered secondary service on branch lines into the early 2000s, while others were transferred to leasing companies such as Helm Financial or shortline operators for continued freight duties.[1] In freight roles, the FP45s' original passenger-oriented gearing was adjusted for increased tractive effort, but the cowl unit design—intended for streamlined high-speed running—resulted in elevated maintenance demands due to restricted access for repairs compared to conventional hood locomotives.[1]Incidents
One notable incident involving an EMD FP45 occurred on September 13, 1981, near Toland, Texas, where Atchison, Topeka and Santa Fe Railway (ATSF) SDFP45 No. 5944 was the trailing unit in a head-on collision between two freight trains east of Sweetwater.[17] The accident, which took place around 3:30 a.m., resulted from a signaling error that failed to protect the movement of one train into the path of the oncoming ATSF freight led by No. 5944, leading to the derailment and destruction of the locomotive, which was subsequently scrapped as a total loss.[17] Another significant event unfolded on December 14, 1994, in Cajon Pass, California, when ATSF SDFP45 No. 96 served as the lead locomotive on westbound intermodal freight train ABKCF-13.[18] The train experienced a runaway after a kink or blockage in the air brake hoses between the third and fourth cars prevented proper brake application on the steep grade, causing it to accelerate uncontrollably and rear-end a stationary Union Pacific train at speeds exceeding 40 mph near Sullivan's Curve.[19][18] The collision derailed multiple cars, including the front portion of the ATSF train, and resulted in No. 96 being heavily damaged and later scrapped, though the crew escaped with minor injuries by jumping from the locomotive.[18] While no other major derailments were recorded, the FP45 fleet faced recurring reliability challenges in ATSF's desert operations, contributing to the railroad's decision to initiate comprehensive rebuilds starting in 1981 to address wear and enhance safety.[3] These incidents underscored vulnerabilities in signaling systems and brake integrity on converted freight units, prompting industry-wide emphasis on improved maintenance protocols for high-horsepower cowl units in rugged service.[17][19]Variants and rebuilds
Derivatives
The EMD F45 served as the primary freight counterpart to the FP45, featuring the same 20-cylinder 645E3 prime mover rated at 3,600 horsepower but omitting the steam generator and associated passenger equipment to reduce weight and cost for freight applications.[1] A total of 86 F45 units were produced between June 1968 and May 1971, with major buyers including the Atchison, Topeka and Santa Fe Railway (40 units, road numbers 1900–1939), Great Northern Railway (14 units, 427–440), and Burlington Northern Railroad (32 units, 6614–6645).[1] Another derivative was the EMD SDP40F, a passenger locomotive developed for Amtrak in the early 1970s, utilizing a 16-cylinder 645E3 engine producing 3,000 horsepower along with a steam generator for train heating.[20] Amtrak ordered 150 SDP40F units, delivered in two batches: 40 locomotives (500–539) in June 1973 and 110 more (540–649) between April and August 1974.[20] These models shared the FP45's innovative cowl unit design, which enclosed the walkways for improved crew protection and aerodynamics, though the F45 was specifically optimized for heavy drag freight with its freight-focused frame shortened to 67 feet 5.5 inches, while the SDP40F retained the FP45's longer 72-foot 4-inch frame but incorporated SD40-2 mechanical components for reliability in passenger service.[1][20] Production differences emphasized the F45's higher power output without passenger-specific features like the steam boiler, contributing to the overall success of EMD's cowl unit series by expanding its application across freight and passenger markets during the late 1960s and early 1970s.[1]Rebuilds
The Atchison, Topeka and Santa Fe Railway initiated a significant rebuild program for its EMD FP45 fleet between 1980 and 1982 at the San Bernardino shops, converting eight units to the SDFP45 configuration optimized for freight service.[6] These locomotives, previously renumbered from their original 100–108 series to 5940–5943 and 5945–5948 in the 1970s, underwent comprehensive upgrades aligned with EMD SD45-2 standards to enhance durability and performance in heavy freight applications.[6] Key mechanical modifications included the installation of updated 20-645E3 prime mover components for the 3,600 hp V20 engine, replacement of the original alternators with AR10 models for improved electrical output, and re-gearing of the traction motors—typically to 60:17 ratios from the as-built 59:18—to reduce top speed from 89 mph to 83 mph while increasing low-speed tractive effort suitable for drag freight.[6] Additional changes involved removing the obsolete steam generators, adding exhaust deflectors, and updating auxiliary systems such as rooftop air conditioners and headlight arrangements to meet contemporary operational needs.[21] Upon completion, the units emerged renumbered as 5990–5993 and 5995–5998, with 5994 skipped due to the prior wrecking of that locomotive.[6] In contrast, the Milwaukee Road's five FP45 locomotives, acquired in 1968 for passenger service on the Hiawatha trains, received no comparable major overhauls and were largely retired or sold for scrap between 1981 and 1984 amid the railroad's financial decline.[1] The Santa Fe rebuilds proved effective, extending the operational lifespan of these units by 10 to 15 years into the late 1990s and early 2000s, with notable improvements in reliability for intermodal and general freight assignments on the expansive Santa Fe network.[21]Retirement and preservation
Withdrawal
The Milwaukee Road's five FP45 locomotives, acquired in 1968 for passenger service, were repurposed for freight after the 1971 Amtrak transition but faced early retirement amid the railroad's financial struggles. All units were retired between 1982 and 1984, with scrapping completed shortly thereafter due to the company's bankruptcy proceedings and efforts to standardize a more efficient fleet by divesting older, high-maintenance assets.[10][22] On the Atchison, Topeka and Santa Fe Railway, the original nine FP45 units transitioned to freight service post-1971 and remained active into the early 1990s, with some rebuilt in the 1980s to extend usability. Following the 1995 merger forming the Burlington Northern Santa Fe (BNSF), the core FP45 fleet was retired by the mid-1990s as part of post-merger rationalization. The rebuilt SDFP45 variants, derived from FP45s, operated longer but were placed in storage during 1997-1998 due to accumulating mechanical issues; the last were retired and scrapped around 2000.[13][23] Related F45 freight variants, lacking steam generators, saw extended service on secondary carriers after initial retirements from major railroads in the mid-1980s. Montana Rail Link acquired several ex-Burlington Northern and Santa Fe F45s in the early 1990s, using them in heavy freight until the last units were retired in 2009 amid fleet modernization. The New York, Susquehanna and Western Railway operated a small number of these into the late 2000s, with final retirements occurring in 2010; one unit was stripped for parts while another was sold to Montana Rail Link before its own withdrawal.[24][1] Withdrawals across operators were driven by the units' advancing age—over 30 years by the 1990s—coupled with high maintenance demands from the 20-cylinder 645-series prime mover, which exhibited elevated failure rates compared to 16-cylinder alternatives, and the cowl unit design's accessibility challenges for repairs. Post-1980 deregulation under the Staggers Rail Act encouraged fleet standardization and efficiency gains, accelerating replacement by more reliable, fuel-efficient models like the EMD SD70 series. Economic pressures further prompted disposal, with most units scrapped and a few sold to short lines for interim use before final decommissioning; rebuilds such as the SDFP45s briefly delayed but ultimately could not avert retirement.[25][26][27][28]Preserved examples
Six examples of the EMD FP45 locomotive have been preserved, all originating from the Atchison, Topeka and Santa Fe Railway (AT&SF) fleet, with none from the Milwaukee Road preserved.[8][29] These units represent the final production of EMD's cowl-unit passenger locomotives, offering significant educational value in illustrating mid-20th-century rail history and the transition from passenger to freight service.[30] The preserved locomotives and their current statuses as of November 2025 are detailed below:| Unit Number | Location | Condition and Notes |
|---|---|---|
| AT&SF 90 | Oklahoma Railway Museum, Oklahoma City, OK | Static display; donated by BNSF in 2000 in non-operational condition.[3][31] |
| AT&SF 92 | Illinois Railway Museum, Union, IL | Operational since 2018 following mechanical restoration by National Railway Equipment Co.; used in tourist and excursion services.[32][33] |
| AT&SF 93 | Great Plains Transportation Museum, Wichita, KS | Under cosmetic restoration as of August 2025; moved to Mid-America Car in Kansas City, MO, in August 2025 for work to restore its red-and-silver Super Fleet livery.[8][29][34] |
| AT&SF 95 | Western America Railroad Museum, Barstow, CA | Static display; donated after retirement and placed on exhibit in its original warbonnet paint scheme.[35] |
| AT&SF 97 | Museum of the American Railroad, Frisco, TX | Static display; donated in December 1999 as the last FP45 in active AT&SF service.[36][37] |
| AT&SF 108 | Southern California Railway Museum, Perris, CA | Operational since 2018 after volunteer restoration to as-delivered appearance; available for public run-one programs and excursion service, though lacking cab air conditioning.[38][39][40] |