Hubbry Logo
search
logo
LNER Class J39 avatar
LNER Class J39
LNER Class J39
current hub
1924952

LNER Class J39

logo
Community Hub0 Subscribers
Read side by side
LNER Class J39
View on Wikipedia
from Wikipedia

LNER Class J39
No. 4965 at Grantham Shed 1947
Type and origin
Power typeSteam
DesignerNigel Gresley
Build date1926-1941
Total produced289
Specifications
Configuration:
​
 • Whyte0-6-0
 • UICCh2
Gauge4 ft 8+1⁄2 in (1,435 mm) standard gauge
Driver dia.5 ft 2 in (1.575 m)
Length
  • J39/1: 54 ft 0 in (16.46 m)
  • J39/2: 55 ft 8+3⁄8 in (16.977 m)
  • J39/3: 54 ft 10+1⁄8 in (16.716 m)
[1]
Loco weight57.85 long tons (58.8 t; 64.8 short tons)
Tender weightJ39/1 44.2 long tons (44.9 t; 49.5 short tons), J39/2 52.65 long tons (53.5 t; 59.0 short tons) J39/3, various
Fuel typeCoal
Water cap.Various
Firebox:​
 • Grate area26 sq ft (2.4 m2)[2]
Boiler pressure180 psi (1.24 MPa)
Heating surface1,397.78 sq ft (129.858 m2)[2]
Superheater:
​
 • Heating area271.80 sq ft (25.251 m2)[2]
CylindersTwo, inside
Cylinder size20 in × 26 in (508 mm × 660 mm)
Valve gearStephenson
Valve typepiston valves
Performance figures
Tractive effort25,665 lbf (114.16 kN)
Career
OperatorsLondon and North Eastern Railway
British Railways
ClassLNER: J39
BR: 4P5F
Numbers4700-4988 : LNER, BR : 64700-64988
Withdrawn1959–1962
DispositionAll scrapped

The London and North Eastern Railway (LNER) Class J39 was a class of medium powered 0-6-0 steam locomotive designed for mixed-traffic work throughout the former LNER system between London and the north of Scotland.[3]

History

[edit]

The class was introduced by Nigel Gresley in July 1926, based on his previous Class J38 (introduced in January 1926) but with larger driving wheels. The larger wheels enabled them to be used on both passenger and freight trains, although at the expense of a lower tractive effort. As a result they were given the BR power classification 4P/5F, rather than the 6F of the earlier class. A total of 289 examples were built over the next fifteen years, mostly built by the LNER's Darlington Works although 28 were built by Beyer, Peacock and Co. in 1935.

The larger wheels necessitated the provision of low splashers over the front two wheels, which is the main means of differentiating between the two classes. However the increased speed afforded by the larger wheels caused the big end bearings to overheat, something that was aggravated by their use on passenger trains, and reliability suffered as a result. The locomotives were all fitted with superheaters and Ross 'Pop' safety valves.[4][3]

J39/2 No. 64898 at Lincoln, Pelham St. Level-Crossing 21 May 1956

All passed into British Railways ownership in 1948 and they were numbered 64700-64988. They began to be withdrawn from service in 1959 and all examples had been scrapped by the end of 1962.[5] No. 64747 served out the remainder of its days as a stationary boiler at the Woodford shed until October 1964.[6]

Orders and numbering

[edit]

355 locomotives were scheduled to be built, but 289 were built. Each of the LNER's three main areas received an allocation of new locomotives, as follows:

J39 locomotive orders[7]
Building programme Date ordered Years built Southern Area North Eastern Area Scottish Area Total
1926 November 1925 1926–27 32 12 – 44
1928 August 1927 1928–29 40 – 12 52
1929 December 1928 1929–30 16 8 3 27
1930 December 1929 1931–33 15 6 (6) 4 (4) 25 (10)
1931 – – – (25) – (25) – (6) – (56)
1934 December 1933 1934 – 12 – 12
1935 December 1934 1935 27 12 – 39
1935–36 September 1935 1936 6 – – 6
October 1935 1936–37 9 16 3 28
1937 November 1936 1937–38 20 12 6 38
1940 January 1940 1941 14 – 4 18
Total 179 (25) 78 (31) 32 (10) 289 (66)

All were built at Darlington, except for the 28 ordered in October 1935, which were built by Beyer Peacock (works nos. 6802–29). Cancelled locomotives shown in parentheses.

As built the locomotives were mostly given numbers in two broad groups:

  • vacant numbers within the former North Eastern Railway (NER) series: 1233/55/9/63/5–70/2–5/7/81/2/6/7/9/90/5/6/8, 1412/8/25/9/36/48–60/3–98, 1504–6/8/9/32–48/51/8/60/3/77/80/4–7, 1803/4/8/13/24/8/35/54/6/7/62/3/9/70/5/80/94/6/8, 1903/22/6–8/30/3/40/2/3/52/65/71/4/7/80/4/96/7
  • runs of consecutive unused numbers between the end of the NER series and the start of the former Great Northern Railway (GNR) series: 2691–2742, 2770–88, 2941–53, 2962–3000

The final batch, built in 1941, took consecutive numbers 3081–98 within the former GNR series.

In 1943, the locomotives were allotted the continuous block of numbers 4700–4988, largely in order of construction, but these were not applied until 1946–47. British Railways increased these numbers by 60000, a process that took until 1951 to complete.[8]

Sub-classes

[edit]
J39/3 No. 4973 at Immingham Locomotive Depot 21 September 1947.

The class was divided into three sub-classes depending on the type of tender fitted.

  • J39/1 Standard LNER 3500 gallon tender.
  • J39/2 Standard LNER 4200 gallon tender.
  • J39/3 Various former North Eastern Railway tenders 3940-4125 gallons.

Accidents and incidents

[edit]
  • On 31 July 1927, locomotive No. 1459 was derailed at 9.33pm, 200 yards east of the Sandsend tunnel mouth on the Whitby-Loftus line whist hauling the No. 70 West Hartlepool to Whitby return excursion.[9]
  • Circa 1930, locomotive No. 1448 was derailed by trap points at Lumpsey Colliery, Brotton, Yorkshire.[10]
  • On 28 August 1950, the connecting rod of a locomotive of this class became detached and consequently pierced the firebox, scalding the driver.[11]
  • On 23 October 1950, locomotive No. 64880 was hauling a passenger train that was derailed at Drumburgh, Cumberland due to the condition of the track. Two people were killed and three were injured.[12]

In model form

[edit]

Bachmann manufactures the J39/2 version in 00 gauge model form.[13]

Bassett-Lowke manufactures the J39/2 version in 0 gauge model form.

Union Mills manufactures the J39 in British N-Scale.

Graham Farish-Bachmann manufactures the J39 in N scale as BR black with late crest & stepped tender numbered as 64841 and 64880.

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

LNER Class J39

View on Grokipedia
from Grokipedia
The LNER Class J39 was a class of 0-6-0 steam locomotives designed by Nigel Gresley for the London and North Eastern Railway (LNER), introduced in September 1926 as the company's standard goods locomotive for mixed-traffic duties.[1] Featuring inside cylinders measuring 20 inches in diameter by 26 inches in stroke and driving wheels of 5 feet 2 inches in diameter, the design was an evolution of the earlier J38 class, with larger wheels to improve performance on varied routes.[1] A total of 289 locomotives were constructed over 15 years, making the J39 the most numerous class designed by Gresley; most were built at the LNER's Darlington Works, with 28 outsourced to Beyer, Peacock & Co. between 1926 and 1937, and boilers supplied by contractors such as Armstrong Whitworth & Co. and Robert Stephenson & Co.[1] The locomotives carried a boiler with a maximum diameter of 5 feet 6 inches operating at 180 psi pressure, providing a total heating surface of 1,669.58 square feet and a tractive effort of 25,664 pounds at 85% boiler pressure.[1] Weighing approximately 102 tons 1 hundredweight in working order (engine and tender combined), with a maximum axle load of 19 tons 13 hundredweight, they were equipped with either Westinghouse air brakes or vacuum brakes, and sub-classes (J39/1, J39/2, and J39/3) distinguished variations in tender capacity and origins.[1] Operationally, the J39 class handled freight traffic including coal, oil, and general goods across the LNER network, with initial allocations to the North Eastern and Southern Areas, later extending to the Scottish Area after 1948 nationalization under British Railways.[1] They also saw occasional use on passenger workings, such as summer excursions and express freights, though not optimized for high speeds.[1] Notable issues included premature wear on axleboxes due to the coupling rod design, contributing to higher maintenance costs.[1] Withdrawals commenced in 1959 and concluded by the end of 1962, with one example (No. 64747) retained as a stationary boiler until October 1964; no locomotives from the class have been preserved.[1]

Background and Design

Origins and Development

In the 1920s, the London and North Eastern Railway (LNER) sought to modernize its locomotive fleet to meet the diverse demands of freight and mixed-traffic operations across its extensive network, which spanned from London to Scotland. Following the 1923 railway grouping, Chief Mechanical Engineer Nigel Gresley initiated a program of standardized "Group Standard" designs to replace outdated pre-grouping locomotives. The J38 class, introduced in January 1926 with 35 examples built at Darlington Works, served as the immediate predecessor and provided a foundation for the J39, influencing its overall layout as a robust 0-6-0 goods engine but highlighting the need for greater versatility in wheel size for varied duties.[2][1] Design work on the J39 began under Gresley's direction in 1925, with the first outline diagram completed in September of that year, aiming to address limitations in the J38 by enhancing suitability for mixed-traffic work. Key improvements included increasing the driving wheel diameter from the J38's 4 ft 8 in to 5 ft 2 in, allowing higher speeds on passenger-related services while retaining strong tractive effort for freight; shortening the frames by 6 in to 29 ft 3 in for better maneuverability; and adding splasher casings over the larger wheels. These modifications evolved the J38's design into a more balanced locomotive without major overhauls to the boiler or cylinders, reflecting Gresley's emphasis on incremental refinement based on early J38 performance data.[1] The J39 design received approval later in 1925, leading to prototype construction at Darlington Works. The first locomotive entered service in September 1926, establishing the class as the LNER's principal 0-6-0 for general duties and paving the way for extensive production over the following years. This timely development underscored Gresley's strategy to fulfill the LNER's pressing need for reliable, adaptable motive power amid growing post-grouping traffic volumes.[1]

Key Design Features

The LNER Class J39 was designed with a 0-6-0 wheel arrangement, offering strong adhesion and maneuverability that made it particularly suitable for shunting yards, freight hauling, and occasional mixed-traffic duties across the network.[1] This configuration derived from the earlier J38 class, but with adaptations for greater versatility in everyday operations.[1] The locomotive's construction featured plate frames supporting inside cylinders, paired with Stephenson valve gear to drive piston valves, ensuring reliable power delivery and ease of maintenance for demanding freight services.[1] The running gear included screw or steam reversing mechanisms in early examples, optimized for efficient handling on varied routes without excessive complexity.[1] To promote coal efficiency, the firebox layout incorporated Robinson long return bend superheaters, which improved steam quality and combustion control, allowing sustained performance on long hauls or shorter shunts with reduced fuel consumption.[1] This adaptation addressed the needs of diverse LNER routes, from coal fields to urban depots. Under initial LNER conventions, the J39 class received black livery for freight engines, accented with red lining on key components such as the boiler bands, cab, and frames until its removal in 1928 as a cost-saving measure.[3] Numbering followed the standard system for goods locomotives, with examples in the 1200-1488 series painted in 12-inch yellow figures shaded in red and brown, positioned below "LNER" lettering on the tenders.[3]

Construction

Production Details

The LNER Class J39 locomotives, designed by Nigel Gresley, were manufactured in a total of 289 units between 1926 and 1941, establishing the class as the most numerous among his designs and a key component of the LNER's standardization efforts for 0-6-0 goods engines.[1] Production was phased over 15 years to align with the LNER's growing freight demands, beginning with the first locomotive entering service in September 1926 as part of an initial batch of 44 units that year; subsequent larger orders followed annually, culminating in the final batch in 1941.[4][1] In the LNER's 1946 renumbering scheme, the class received consecutive numbers from 4700 to 4988 to consolidate similar locomotive types. Following nationalization, British Railways assigned them the range 64700 to 64988 starting in 1948, reflecting the integration into the national fleet.[5] This output occurred amid the LNER's interwar expansion phase, where despite a 37% drop in net revenue from 1923 to 1932 due to the late-1920s recession and Great Depression, the company prioritized locomotive procurement to modernize operations and sustain heavy industrial goods traffic.[6]

Builders and Batches

The LNER Class J39 locomotives were primarily constructed at the company's Darlington Works, with 28 units built by the private contractor Beyer, Peacock & Co. to meet production demands. Many of the Darlington-built locomotives used boilers supplied by contractors such as Armstrong Whitworth & Co. and Robert Stephenson & Co.[1] Darlington Works handled the entire LNER production of 261 locomotives from 1926 to 1941, including the initial batches with steam reversing gear for the first 44 examples and screw reversing gear for subsequent builds from 1935 onward, along with refinements such as Fountain sight-feed lubricators. Later builds incorporated vacuum braking only from 1935.[1][7] Beyer, Peacock & Co. produced 28 locomotives between 1926 and 1937 under LNER oversight, adhering to Gresley's design standards.[1]
BuilderKey Batches/LotsYearsQuantityNotes
Darlington WorksVarious lots including initial batches1926–1941261Primary builder; steam reversing gear on first 44 (1926); screw reversing from 1935; boilers often from contractors; 3,500-gal and 4,200-gal tenders.[1][7]
Beyer, Peacock & Co.Tender order TO 711926–193728Private contract; variations in braking systems.[1]
A total of 289 locomotives were completed across these builders from 1926 to 1941. Variations between early and late builds primarily involved braking systems (Westinghouse air brakes on early examples, transitioning to vacuum) and lubrication, with all adhering to Gresley's design standards for reliability in freight service.[1][7]

Technical Specifications

Dimensions and Wheel Arrangement

The LNER Class J39 was a 0-6-0 steam locomotive designed for mixed-traffic duties, featuring a rigid wheelbase without leading or trailing trucks. The driving wheels measured 5 ft 2 in (1,575 mm) in diameter, providing a balance of speed and tractive capability for general freight and passenger work on secondary lines.[1] Key physical dimensions emphasized the class's compact yet robust construction for versatility across the LNER network. The engine frames extended 29 ft 3 in (8.92 m) in length, with an engine wheelbase of 17 ft 0 in (5.18 m) to support the coupled wheels. The tender wheels were 3 ft 9 in (1.14 m) in diameter, contributing to stable running with varying loads.[1]
SpecificationMeasurement
Wheel Arrangement0-6-0
Driving Wheel Diameter5 ft 2 in (1,575 mm)
Tender Wheel Diameter3 ft 9 in (1,143 mm)
Frame Length29 ft 3 in (8.92 m)
Engine Wheelbase17 ft 0 in (5.18 m)
Engine Weight57 long tons 17 cwt (58.8 t)
Maximum Axle Load19 long tons 13 cwt (19.9 t)
Total Weight (Engine + Tender)102 long tons 1 cwt (103.7 t)
This configuration resulted in a maximum axle load of 19 tons 13 cwt (19.9 t), enabling operation on routes with lighter infrastructure while handling typical mixed-traffic demands. Weights remained largely consistent across batches, though minor variations occurred with tender types.[1]

Power and Performance Characteristics

The LNER Class J39 featured a Gresley-designed boiler operating at a working pressure of 180 psi, equipped with a superheater of the Robinson long-return type and an evaporative heating surface area of approximately 1,398 square feet, comprising 872 square feet from tubes, 355 square feet from flues, and 171 square feet from the firebox.[1] This configuration, with a grate area of 26 square feet, enabled efficient steam production suitable for the locomotive's mixed-traffic duties.[1] The boiler's design prioritized reliability and power output for freight and secondary passenger services, contributing to the class's versatility across the LNER network.[1] Power was developed through two inside cylinders measuring 20 inches in diameter by 26 inches in stroke, fitted with 8-inch diameter piston valves and Stephenson valve gear.[1] This arrangement delivered the motive force to the driving wheels via inside connecting rods, optimized for the 0-6-0 wheel configuration. The resulting tractive effort was rated at 25,664 lbf when calculated at 85% of boiler pressure.[1] This value is derived from the standard formula for simple-expansion steam locomotives used in British practice: TE = (0.85 × P × d² × s) / D, where TE is tractive effort in lbf, P is boiler pressure in psi (180), d is cylinder diameter in inches (20), s is piston stroke in inches (26), and D is driving wheel diameter in inches (62). To arrive at the solution, first compute d² = 400, then d² × s = 400 × 26 = 10,400; divide by D to get 10,400 / 62 ≈ 167.74; multiply by 0.85 × P = 0.85 × 180 = 153, yielding 153 × 167.74 ≈ 25,664 lbf. This formula accounts for effective mean pressure (85% of boiler pressure to reflect practical steam admission losses) and normalizes the cylinder force relative to wheel geometry for consistent rating across designs.[1] The locomotive's tenders supported sustained operations with a representative water capacity of 3,500 imperial gallons in the standard J39/1 subclass, allowing for extended runs without frequent replenishment.[1] Coal capacity was typically 6 tons, providing sufficient fuel for the class's moderate power demands during typical hauls of goods trains.[8] Subclasses J39/2 featured 4,200-gallon tenders, while J39/3 used various former North Eastern Railway tenders with capacities ranging from 3,940 to 4,125 gallons, enhancing range on longer routes.[1][5]

Operational History

Introduction and Deployment

The LNER Class J39 locomotives entered service in September 1926, with the first examples allocated to the North Eastern Area, including key depots at York and Newcastle, as well as the Southern Area, reflecting their design for versatile mixed-traffic operations.[1] In their early years, the J39 class handled a range of tasks, including coal and general goods trains, shunting operations at yards, and occasional lighter passenger services.[1] This deployment emphasized their role in supporting regional freight networks, particularly in the industrial heartlands of the North East. Deployment later expanded to include the Scottish Area after nationalization in 1948, broadening their operational footprint across the system.[1] The J39 allocations were adjusted over time to meet evolving demands, with gradual integration into Scottish operations for subsequent batches.[1] This ensured the class provided reliable mixed-traffic performance.

Service Performance

The LNER Class J39 locomotives proved reliable workhorses in freight and mixed-traffic roles.[1] They were powerful and versatile, used on goods trains as well as occasional passenger and excursion workings, though not optimized for high speeds.[1] The class experienced issues with axlebox wear and overheating, particularly the right-side boxes, due to lateral forces; this was reported in 1938 and contributed to higher maintenance costs.[1] Big end bearings also overheated when used on faster passenger services. Divided axleboxes were trialed in 1947 but later abandoned. Notable incidents included derailments in 1927 and 1950. Despite these, the fleet achieved high overall reliability. In wartime service, the class handled essential coal, oil, and general freight duties across the LNER network. Post-nationalization under British Railways from 1948 into the 1960s, they continued on secondary routes, supporting lighter traffic and local goods workings until dieselization advanced, with passenger duties reduced after 1946 by more powerful locomotives like the B1 class.[1]

Variants

Sub-classes

The LNER Class J39 locomotives were divided into three sub-classes based on the type of tender fitted, reflecting variations in capacity and origins.[1] The J39/1 sub-class utilized a standard LNER 3,500-gallon tender. These were among the earlier locomotives in the production run from 1926 to 1929, with examples numbered in the 6470–6529 range.[1] The J39/2 sub-class featured a larger standard LNER 4,200-gallon tender. This sub-class included locomotives built from 1930 onward.[1] The J39/3 sub-class, introduced from 1934, comprised locomotives paired with various former North Eastern Railway (NER) and Great Central Railway (GCR) tenders of approximately 4,000-gallon capacity.[1] The class as a whole numbered 289 locomotives, built between 1926 and 1941. All sub-classes used the Diagram 97 boiler. The tender sub-classifications were dropped in December 1952.[1]

Modifications

During their service life, several LNER Class J39 locomotives underwent modifications to improve braking systems and address mechanical issues. In the 1930s, the initial 32 locomotives equipped with Westinghouse brakes (12 for the North Eastern section and 20 for the Great Eastern section, built 1928–1929) were converted to steam and vacuum braking to standardize operations across the class.[1] This change aligned them with later builds from 1935 onward, which featured vacuum brakes for both the locomotive/tender and train, enhancing reliability for mixed-traffic duties. Post-nationalization under British Railways in 1948, further standardization of vacuum brakes was implemented across the fleet to ensure consistency.[1] In the 1940s, attention focused on the class's notorious problem with hot axleboxes, which caused excessive wear and high maintenance costs. Various experimental modifications were attempted, including the installation of divided axleboxes on six locomotives at Gorton Works beginning in 1947.[1] However, these proved unsuccessful in resolving the issue, leading to no additional fittings after 1950 and the eventual removal of the divided axleboxes.[1] These alterations, including the braking and axlebox changes, aimed to extend operational viability, though persistent axlebox failures limited their effectiveness. Withdrawals commenced in 1959 and concluded by the end of 1962.[1]

Incidents and Withdrawal

Notable Accidents

One significant incident involving an LNER Class J39 locomotive occurred on 28 August 1950 near Northolt Junction, Middlesex, when No. 64798 was hauling a goods train from Woodford to Neasden. The right-hand connecting rod's little-end failed due to a loose gudgeon pin nut, which had been inadequately secured and missed during a routine examination; the rod bent, punctured the firebox outer shell, and released steam and water, forcing the crew to evacuate.[9] The driver suffered slight scalding but returned to duty after two days, while the fireman experienced shock and was absent for one day; no derailment occurred, and the train halted after traveling nearly a mile with locked wheels.[9] This accident highlighted deficiencies in the crosshead design and inspection procedures, prompting subsequent modifications to gudgeon pin fixings across similar locomotives to enhance safety.[9] Less than three months later, on 23 October 1950, J39 No. 64880 derailed while working the 1:15 p.m. passenger train from Carlisle to Silloth on the branch line near Kirkbride, Cumberland. Traveling at about 45 m.p.h. over defective track—characterized by worn 84 lb. rails from 1896, poor ballast, and uneven cross levels—the engine and four bogie coaches left the rails, with the locomotive overturning.[10] Driver T. W. Jackson and Fireman K. Pearson were killed, and three of the 24 passengers sustained slight injuries or shock.[10] The inquiry attributed the derailment primarily to neglected track maintenance on this low-traffic mixed-traffic route, leading to the imposition of a 30 m.p.h. permanent speed restriction and reinforced British Railways protocols for regular inspections on secondary lines.[10] These 1950 events underscored vulnerabilities in the J39 class during its transition to British Railways operation, particularly on goods and branch passenger duties, and contributed to broader safety enhancements in maintenance and design standards for 0-6-0 mixed-traffic locomotives.[10]

Scrapping and Preservation Status

The withdrawal of the LNER Class J39 locomotives commenced in 1959 amid British Railways' push toward dieselization and electrification, accelerating due to the class's ongoing maintenance challenges, including persistent hot axlebox problems. The process was swift, with the entire fleet of 289 engines removed from service by the end of 1962.[1] Scrapping occurred predominantly at key British Railways facilities, including Doncaster Works and Darlington Works, where the majority of the class had originally been constructed. 70 J39s were dismantled during 1960 and 1961.[11] No preservation efforts succeeded for the J39 class, as its large numbers and lack of unique historical significance deterred museum acquisitions during the 1960s steam exodus. The last withdrawals occurred in 1962. One locomotive, No. 64747, was retained as a stationary boiler at Woodford Halse shed until October 1964 before scrapping.[1][12] Today, no intact J39 locomotives survive in preservation.

Modeling

Commercial Models

Bachmann offers ready-to-run models of the LNER Class J39 in OO gauge, initially introduced in 1994 with a split-chassis mechanism, but significantly updated in 2015 to feature a DCC-ready 21-pin socket and improved running characteristics.[13] The updated series from 2015 onwards, such as the 31-867, includes variants in BR black livery with early emblem and factory-weathered finishes, capturing the J39/2 sub-class details such as the extended smokebox and Walschaerts valve gear for enhanced realism.[14] In N gauge, Graham Farish (Bachmann's N scale brand) has produced the J39 since its 2013 debut, with DCC-ready 6-pin socket options standard across the range, including a 2025 release of model 372-400A in LNER black.[15] Models include LNER black, BR black with early and late emblems, and weathered variants to depict post-war service conditions, reflecting the locomotive's mixed-traffic versatility.[16] Earlier N gauge ready-to-run models were available from Union Mills starting in 2010, primarily in BR liveries, though these have been largely superseded by the more detailed Graham Farish tooling.[17] Hornby and Dapol produced OO gauge kits of the J39 in the late 20th century, often finished in 1940s LNER black livery, but these user-assembly options have been overtaken by contemporary ready-to-run productions.[18] Modern Bachmann and Farish models precisely replicate key features like the extended smokebox and valve gear arrangements of later J39 variants.

Model Kits and Custom Builds

Etched brass kits for the LNER Class J39 cater primarily to scratchbuilders and advanced modelers, focusing on 4mm (OO) and 7mm (O) scales to replicate the locomotive's details accurately. In 7mm scale, Connoisseur Models offers a comprehensive etched brass kit that includes bodywork, chassis components, and variant-specific parts for sub-classes like the J39/1, requiring assembly with a motor, gearbox, and wheels for completion.[1] Alan Gibson supplies complementary etched nickel silver components, such as domes, safety valves, and wheel sets, enabling custom builds of J39/1 variants in 7mm scale for fine-scale enthusiasts.[19] Etched brass chassis kits are available from various producers for integration with existing bodies to support scratchbuilt or modified J39 constructions in these scales.[20] Custom builds often emphasize modifications to commercial bases, with techniques like chassis replacements and detail additions enhancing authenticity. For instance, etched chassis packs allow modelers to upgrade 4mm J39 frames for improved running and scale fidelity. Post-2020, 3D-printed resin parts have gained traction for J39 models, offering accessible components like boiler fittings and tender details through specialist producers, supplementing traditional etched kits in both 4mm and 7mm scales as of 2025.[21] Weathering custom J39 builds replicates the engine's service-worn appearance, particularly the heavy grime from 1950s freight duties under British Railways. Techniques using enamel paints, applied in thin washes and dry-brushed layers, effectively mimic oil stains, coal dust, and rust on Bachmann-derived models, with focus on underframes and smokebox areas for realistic patina.[22] Online forums like RMWeb serve as key resources for J39-specific conversions, where enthusiasts document processes such as adding British Railways numbering plates via etched overlays or plasticard fabrication to LNER-liveried kits.[23]

References

  1. LNER Encyclopedia: The Gresley J39 0-6-0 Locomotives
  2. The Gresley J38 0-6-0 Locomotives - LNER Info
  3. LNER Locomotive and Rolling Stock Liveries - LNER Info
  4. LNER / BR J39 0-6-0 - TOWER BRASS O SCALE KITS.
  5. LNER Class J39 | Locomotive Wiki - Fandom
  6. [PDF] What were the investment dilemmas of the LNER in the inter-war ...
  7. [PDF] U DYE WB Yeadon London & North Eastern 1847-1997 Railway ...
  8. None
  9. 0-6-0 Steam Locomotives in Great Britain
  10. Gresley locomotives - SteamIndex
  11. LDO - Gresley Designs For LNER
  12. [PDF] SUPPLEMENTARY OPERATING INSTRUCTIONS - AWS
  13. None
  14. [PDF] Rail Accident Report - GOV.UK
  15. None
  16. Volume Thirty Nine - What Happened To Steam
  17. LNER Class J39 No. 64747 | Locomotive Wiki | Fandom
  18. Bachmann 31-867 London & North Eastern Railway J39 64792 ...
  19. https://www.hattons.co.uk/10249/bachmann_branchline_class_j39_0_6_0_64960_in_br_black_with_early_emblem_weathered/stockdetail
  20. https://www.hattons.co.uk/directory/versiondetails/2078/graham_farish_n_0_6_0_class_j39_lner
  21. https://www.hattons.co.uk/38722/graham_farish_372_403_class_j39_0_6_0t_64841_in_br_black_with_late_crest_stepped_tender_weathered/stockdetail
  22. https://www.hattons.co.uk/directory/versiondetails/2184/union_mills_n_0_6_0_class_j39_lner
  23. Hornby, Dapol, Grafar OO Gauge Steam Locomotives - Vectis Auctions
  24. [PDF] Summer 2023 Edition ALAN GIBSON MODEL RAILWAY PRODUCTS
  25. MT101: Replacement Chassis Kit for Bachmann LNER Group ...
  26. Railways Kits and Models | UK - Isinglass Models
  27. 41. Weathering a Bachmann LNER J39 Locomotive - YouTube
  28. A J39/1 from the Bachmann model - Kitbuilding & Scratchbuilding
User Avatar
No comments yet.