Hubbry Logo
OF-40OF-40Main
Open search
OF-40
Community hub
OF-40
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
OF-40
OF-40
OF-40
View on Wikipedia
from Wikipedia

The OF-40 is an Italian main battle tank developed as a joint venture between OTO Melara and Fiat, and intended primarily for export sales. OTO Melara would develop and produce the hulls, and automotive components would be provided by Fiat (the designation of the vehicle comes from the initials of the two companies, whereas "40" refers to the planned mass of the tank).[1] Initial design work was started by OTO Melara in 1977, with the first prototypes ready by 1980.

Key Information

While the vehicle was never used by the Italian Army, it was used by the United Arab Emirates until being replaced by the more modern Leclerc MBT.[2]

Design

[edit]

Oto Melara produced the Leopard under licence, and later worked with German industries to make the Lion/Leone tank, a tropicalized version of the Leopard, in order to freely sell it in the Middle East. Germany pulled out from this development and Italian industries could not sell the Lion without German permission. So they produced this new tank called OF-40, that was a evolution of the Lion lineage. The OF-40 does use the main mechanical components already produced for the Leopard 1, which had also been produced under license by OTO Melara since 1974. The OF-40 follows the layout of the Leopard, especially in the hull. The engine, transmission and tracks are the same, as are the crew and ammunition layout. The driver is located in the front-right of the hull, with ammunition storage and NBC overpressure system located to the driver's left. The turret is located toward the middle of the tank, with the gunner and commander on the right side of the turret, and the loader on the left.

Armament

[edit]

The armament consists of a 105 mm main gun with a rifled, 52-calibre barrel, developed by OTO Melara exclusively for this vehicle but very similar to the M68 gun (OTO also produced the M60 tank under licence), more compact and simpler than the L7 gun (especially the recoil system). The cannon is equipped with a thermal sleeve, fume extractor and a semi-automatic breech mechanism and is aimed in both vertical and horizontal axes with an electro-hydraulic drive system. The main gun however is not stabilized. The cannon uses NATO-standard 105 mm ammunition with APDS (1470 m/s muzzle velocity), HEAT (1170 m/s), HESH (730 m/s), incendiary and smoke rounds. The OF-40 Mark 3 variant was armed with the same smoothbore 120mm gun as the C1 Ariete.[3]

Two FN Herstal 7.62 mm MAG machine guns make up the secondary armament: an electrically fired coaxial machine gun slaved to the main cannon and a second gun on an anti-aircraft pintle installed next to the loader's hatch on the turret.

The tank uses an advanced fire-control system developed by Officine Galileo. The commander's station was outfitted with an independently stabilized VS 580-B panoramic day/night sight with an 8x magnification, co-developed with SFIM of France. The sight is housed in an armoured turret located in front of the commander's hatch. The tank gunner uses an 8x C125 telescopic sight to lay fire from the main cannon and coaxial MG. This sight is co-aligned with a Selenia VAQ-33 laser rangefinder which has an effective range from 400 to 10,000 m.

Propulsion

[edit]

The OF-40 is powered by a German-made MTU MB 838 Ca M500 diesel motor which provides an output of approx. 610 kW at 2,200 RPM. The MB 838 Ca M500 is a four-stroke, super-charged, 10-cylinder multi-fuel engine with a 90° Vee configuration and is coupled to a ZF transmission system with a fluid torque converter and an epicyclic gearbox with four forward and two reverse gears. The engine is liquid-cooled and further optimized for operation in arid environments with an automatic air-cooling system which detects overheating conditions and activates a cooling fan on the engine deck. The engine compartment also has an automatic fire-extinguishing system.

The running gear consists of 14 (2×7) rubber-rimmed double dished road wheels, two idler wheels (at the front of the hull), two drive sprockets (rear hull) and ten (2×5) return rollers supporting two tracks. The tracks have a service life of approx. 2,500 km. The OF-40 rests on an independent torsion bar suspension system with hydraulic shock absorbers and friction dampers on the first, second, third, sixth and seventh pairs of road wheels.

The tank can also drive under water to a limited depth using a snorkel to feed the engine and comes equipped with two water pumps rated at 120 L/min used to evacuate water from the tank during fording.

Sales

[edit]

While the tank was trialled by Thailand, demonstrated in Egypt and offered for local production in Spain and Greece, the only orders for the vehicles ultimately came from the United Arab Emirates. The first UAE order of 18 OF-40s was filled in 1981.[1] This was followed by a second order for 18 more OF-40s, and 3 OF-40 derived armoured recovery vehicles which was filled by 1985. OTO Melara no longer offers the OF-40 for purchase.

Variants

[edit]

OF-40 Mk.2: The Mk.2 version of the OF-40 featured an improved OG14LR fire control system which included dual-axis main gun stabilisation and improved sensors. The Mk.2 had an improved day/night periscope for the commander, an improved sight with variable 7x and 14x magnification for the gunner, and a turret-mounted LLLTV camera which provides night-time observation and identification up to 2 km and relays imagery to monitors at both the gunner's and commander's stations. This variant also received welded steel appliqué armour on the turret front face. All UAE OF-40s have been upgraded to Mk.2 standard.

OF-40 Mk.2 MTCA: A single example of OF-40 Mk.2 was upgraded with the MTCA engine that gave the tank 170 extra HP from 830 to 1000 HP.

OF-40 Mk.2 THETIS: An experimental OF-40 Mk.2 that had access to the THETIS thermal sight+NVD along with extra armour around the tank turret.

OF-40 ARV: An armoured recovery vehicle based on the OF-40 chassis, manned by a 4-man crew and equipped with an 18-ton crane, a 35-ton winch, dozer blade and a welding kit.

OF-40 SPAAG: Although it was never produced, a self-propelled anti-aircraft vehicle similar to the Gepard was proposed should any customers request it.

OF-40 Mk.3: Improved version with a 120mm gun and a V-12 MCTA engine. It is thought to have been created due to Kuwait looking fondly at an improved OF-40, but no deal was ever signed and the tank remained in prototype stage. [3]

Sabiex HIFV: Prototype for a Heavy Infantry fighting vehicle developed in Belgium by Sabiex between 2005 and 2008 for the UAE from leftover OF-40 MK.2 stocks. The vehicle uses a BMP-3 turret and can carry 5 infantrymen plus the 2 operators, it weighs 35 tons without the turret and 45 tons with the turret.[4] Despite the creation of a functional prototype, the conversion of the remaining OF-40 into HIFVs never happened.[2]

[edit]

The OF-40 hull was later used as the basis for the Palmaria self-propelled artillery system. The Palmaria met with far more success than the OF-40, with 210 being ordered by Libya and 25 by Nigeria. Argentina purchased the Palmaria turrets, but used their own TAM light tank chassis.[5]

Both Leopard 1 and OF-40 hulls were used during the development for the Otomatic self-propelled air-defence system.

Operators

[edit]
  •  United Arab Emirates: 36 OF-40 Mk.2, 3 OF-40 ARV. Withdrawn from service and being proposed for conversion to heavy Infantry Fighting Vehicles.

Similar vehicles

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

OF-40

View on Grokipedia
from Grokipedia
The OF-40 is a developed in during the late 1970s as an export-oriented design by the companies (later Otobreda) and , marking the first indigenous Italian heavy armored fighting vehicle produced since . Featuring a conventional layout with a four-man , it is armed with a 105 mm rifled L7-series main gun capable of firing NATO-standard ammunition, supplemented by two 7.62 mm machine guns and smoke grenade launchers for defense. Powered by an MTU MB 838 Ca M500 V10 air-cooled diesel engine delivering 830 horsepower, the tank achieves a top road speed of 60 km/h and an operational range of 600 km, while its and welded steel hull with spaced armor elements provide mobility and basic protection against kinetic and shaped-charge threats, with a combat weight of 45.5 tonnes. Measuring 9.22 m in length, 3.51 m in width, and 2.68 m in height, the OF-40 was optimized for hot climates with features like an protection system and deep fording capability up to 2.25 m (extendable to 4 m with a kit). Development of the OF-40 began in late 1977 as a private venture to offer a cost-effective alternative to licensed German tanks, which had produced over 200 units of during the but could not export due to restrictions. The first was completed in mid-1980, with production commencing in February 1981 and spanning until 1985, resulting in 18 Mk 1 and 18 Mk 2 tanks, plus three armored recovery vehicles (ARVs), for a total of 39 units (excluding prototypes). Despite demonstrations to potential buyers in countries such as , , , and , the OF-40 achieved only limited commercial success, with all units exported to the (the sole operator) in two batches of 18 tanks each (Mk 1 in 1981 and Mk 2 in 1985), though withdrawn from front-line service around 2014 and placed in storage. The UAE's acquisition was driven by the need for a modern, mobile suited to desert operations, though the type saw no major combat deployments and has since been supplemented by more advanced systems like the French Leclerc. The OF-40 family includes the baseline Mk 1 variant, which lacked gun stabilization and featured basic , followed by the improved Mk 2 with a stabilized , enhanced , and better armor spacing for export markets (the original Mk 1 units were upgraded to Mk 2 standard). A single Mk 3 prototype was developed in the late 1980s with a 120 mm smoothbore and a more powerful V-12 MTCA rated at 1,000 hp, but it never entered production due to lack of interest. The ARV variant, delivered to the UAE, incorporated a dozer blade, crane, and for recovery tasks. The OF-40's also served as the basis for other Italian export systems, including the Palmaria self-propelled howitzer (over 200 exported to and ) and the self-propelled anti-aircraft gun, demonstrating its broader influence on Italy's defense industry despite the tank's modest production run. Production ceased in the mid-1980s, and by the , focus shifted to the domestic tank, rendering the OF-40 an obsolete but notable chapter in Italian armored vehicle design.

Development

Background and Origins

During the 1950s and 1960s, the depended heavily on imported and licensed foreign tanks to modernize its armored forces, including American M47 Pattons and later the German , which produced under license with a total of around 920 units entering service by the 1970s. This reliance on surplus U.S. models like the M47 and M60, alongside the , highlighted the need for domestic development to reduce dependency and build indigenous capabilities, though budget constraints limited full-scale national projects. In 1977, and established a to design a new 40-ton primarily for export markets, marking Italy's first major postwar indigenous effort. This initiative evolved from the earlier canceled (or Leone) project, a proposed tropicalized variant of the developed in collaboration with German firms, which had been abandoned due to lack of funding and interest. The OF-40, named after its developers (O for , F for ), drew on Italy's experience in production as a baseline while aiming to create a distinct design suitable for international sales. Key design goals emphasized compatibility with Middle Eastern climates through features like enhanced and engine cooling for operations, alongside cost-effectiveness to compete with more advanced Western tanks like 2. Initial specifications finalized in included a 105mm rifled gun, an MTU , and , prioritizing simplicity and export viability over cutting-edge domestic adoption.

Prototyping and Production

The first two prototypes of the OF-40 were completed in 1980 by and , equipped with a license-built V-10 to demonstrate production capabilities. Initial trials conducted in included mobility tests on varied terrain and simulated desert conditions to assess viability for Middle Eastern markets. Between 1980 and 1981, the prototypes underwent extensive firing and mobility evaluations, which highlighted the tank's performance and attracted interest from the (UAE). These tests prompted adaptations for tropical environments, such as enhanced dust filters and improved cooling systems, to address hot, arid operational challenges. Production shifted from prototyping to series manufacturing following the 1981 UAE contract signed in 1980, with assembly occurring at OTO Melara's facilities in , , between 1981 and 1985; a total of 36 units were built, comprising 18 Mk.1 variants and 18 Mk.2 upgrades. Early Mk.1 models faced challenges with an unstabilized turret that prevented accurate firing while moving, an issue resolved in later marks through the integration of stabilization systems. The did not adopt the OF-40, opting instead to upgrade its existing fleet to meet domestic needs.

Design

Armament and Fire Control

The primary armament of the consists of an 105 mm L/52 rifled gun, an Italian-licensed variant of the British design, mounted in the turret with a semiautomatic falling-wedge breech mechanism. This rifled cannon, equipped with a and fume extractor, elevates from -9° to +20° and supports a full 360° turret traverse powered by electrohydraulic systems. The gun is manually loaded by a dedicated loader without an , achieving a practical of up to 9 rounds per minute, and carries a total of 57 rounds stored across the hull (42 rounds) and turret (15 ready rounds). Secondary armament includes a 7.62 mm mounted coaxially to the main gun for , alongside a second 7.62 mm positioned on the turret roof for anti-aircraft and close-range defense, both fed from a combined ammunition pool of 5,700 rounds stored in the turret and hull. Additionally, the turret is fitted with eight launchers (four per side) to generate obscuring screens for tactical withdrawal or maneuver. These machine guns provide versatile support against and light vehicles, enhancing the tank's overall combat flexibility. The evolved across variants to improve accuracy and engagement capabilities. The initial Mk.1 configuration featured unstabilized optical sights, including a gunner's x8 magnification and a commander's panoramic , limiting effective firing to stationary positions. In contrast, the Mk.2 upgrade introduced full stabilization in and traverse, enabling fire on the move, along with the Officine Galileo OG14LR system incorporating a (effective range 400–9,995 m), a ballistic computer variables such as type and environmental factors, and a stabilized day/night sight for the gunner. Later units delivered to the incorporated the thermal imaging system from Leonardo (formerly Officine Galileo), providing passive observation and enhanced night/low-visibility targeting for improved in operations. Ammunition for the 105 mm gun adheres to NATO standards, encompassing armor-piercing fin-stabilized discarding sabot (APFSDS) rounds for anti-tank engagements, (HEAT) for shaped-charge penetration, and (HESH) for defeating spaced or composite armor through spalling effects, with additional options like smoke and canister for versatility. Italian-developed APFSDS projectiles, such as those compatible with the L7 lineage, offer penetration depths of approximately 400 mm of rolled homogeneous armor at typical combat ranges, establishing the OF-40's effectiveness against contemporary armored threats during its service era.

Protection and Armor

The OF-40 features a hull and turret constructed from welded rolled homogeneous armor (RHA) plates, with the frontal and turret front well-sloped to enhance ballistic against kinetic and shaped-charge threats. Spaced armor elements are incorporated in critical areas, including 15 mm plates along the hull sides and for added defense against (HEAT) rounds, while thin rubberized skirts cover the upper track links to mitigate and fragmentation effects. No reactive armor is fitted as standard, relying instead on the baseline array and the tank's mobility for survivability in dynamic engagements. The four-man crew—consisting of the , gunner, loader, and —is arranged in a conventional layout, with the positioned front-right in the hull, the fighting compartment amidships, and the powerpack at the rear to isolate potential fires from personnel. safety is supported by an (nuclear, biological, chemical) overpressure filtration system to protect against contaminated environments, in the and fighting compartments, and an emergency escape hatch in the hull floor. The roof armor, while integrated into the overall steel structure, provides limited overhead protection, rendering the vehicle susceptible to top-attack munitions in high-threat scenarios. These protective features contribute to the OF-40's overall combat weight of 45.5 tons, with dimensions of 9.22 meters in length (gun forward), 3.51 meters in width (including track guards), and 2.45 meters in height to the turret roof, influencing its low and tactical profile on the . Complementing the armor, the tank's high mobility allows it to evade threats where passive defenses may prove insufficient.

Propulsion and Mobility

The OF-40 main battle tank is equipped with a MTU MB 838 CaM-500 V10 diesel engine, producing 830 horsepower at 2,200 rpm. This powerplant drives a semi-automatic ZF 4HP250 transmission with four forward gears and two reverse gears, facilitating smooth gear shifts and reliable operation in varied conditions. The integrated powerpack design enhances maintenance accessibility and contributes to the tank's overall efficiency. The suspension system consists of torsion bars augmented by hydraulic shock absorbers on the first, second, third, sixth, and seventh road wheel stations, providing effective for rough . It features 14 rubber-tyred road wheels per side—arranged as seven dual wheels—along with six return rollers, three track tensioners, and an idler at the front, directly derived from the Leopard 1 chassis for proven durability and cross-country performance. In terms of mobility, the attains a maximum speed of 60 km/h and approximately 40 km/h off-, with an operational range of 600 km on internal fuel tanks holding 1,000 liters. The stands at 18.2 hp/t, enabling it to ford depths of 1.2 m without preparation, climb gradients up to 60%, and maintain a ground pressure of 0.92 kg/cm² for traversal over soft sands. -specific adaptations include a tropicalized cooling system with enhanced air filters to mitigate dust ingress and overheating in high-temperature environments.

Production and Deployment

Manufacturing Details

The OF-40 main battle tank was primarily manufactured by OTO Melara at its facilities in La Spezia, Italy, where the hull and turret were produced and final assembly took place, while Fiat (later IVECO-FIAT) in Turin handled key components such as the powerpack. This division of labor leveraged existing production expertise from OTO Melara's licensed assembly of Leopard 1 tanks, incorporating off-the-shelf parts like the MTU MB 838 CaM-500 engine to minimize development costs and streamline manufacturing. Production occurred on a low-volume basis from 1981 to 1986, with a total output of 36 main battle tanks (18 initial Mk 1 models, all later upgraded to Mk 2 standard, plus 18 additional Mk 2 units), 3 armored recovery vehicles (ARVs), 2 prototypes, and 1 Mk 3 prototype, exclusively for export to the . The unit cost for the Mk 1 variant was approximately $1.121 million in 1985 USD, reflecting the use of proven components to keep expenses competitive for export markets. The program's challenges stemmed from its export-only orientation, as the opted for upgrades instead of domestic procurement, resulting in no additional orders beyond the UAE contract and the cessation of series production by 1986. Limited production runs further constrained , though the design's reliance on mature technologies helped maintain quality without extensive new tooling.

Export and Sales

The OF-40 was developed as a private venture by and specifically for the export market, with marketing efforts beginning in 1978 and focusing on Middle Eastern nations such as the and . Demonstrations were held in 1980 and 1981, including in , to showcase the tank's suitability for desert environments and its cost-effectiveness relative to competitors like the German or French AMX-30. Offers for local production were extended to countries including and to enhance appeal. The sole successful export deal came from the , which signed a contract in 1981 for 18 OF-40 Mk.1 main battle tanks; these were subsequently upgraded to Mk.2 standard, with an additional 18 Mk.2 tanks procured to reach a total of 36 vehicles, accompanied by three armored recovery vehicles (ARVs). Deliveries commenced in 1981 and continued into the mid-1980s. The unit cost for an OF-40 Mk.1 was approximately $1.121 million in 1985 dollars, while Mk.2 variants were priced at around $3.06 million in 1998 dollars, reflecting upgrades in fire control and engine systems. Despite generating interest in markets like , , and , no further sales materialized beyond the UAE. Bids were frequently unsuccessful against cheaper Soviet options such as the , and the timing of the Cold War's end in the early curtailed the broader export boom for Western tanks, leading to production dormancy by 1993. The UAE sales provided vital revenue for and , highlighting Italy's dependence on foreign contracts for its armored vehicle programs, as the OF-40 saw no domestic adoption.

Operational History

Service in UAE

The first batch of 18 OF-40 Mk.1 main battle tanks was delivered to the in 1981, marking the type's entry into active service as the sole export customer for the Italian-designed vehicle. An additional 18 OF-40 Mk.2 tanks, along with three armored recovery vehicles based on the same chassis, arrived in 1985, bringing the total fleet to 39 units; the original Mk.1 models were subsequently upgraded to the Mk.2 standard to standardize capabilities across the force. The Mk.2 upgrade incorporated an advanced developed by Officine Galileo, designated OG14L2A, which provided dual-axis gun stabilization, integration, and enhanced sensors suitable for low-visibility conditions, including night operations in environments. This configuration improved the tank's effectiveness for UAE-specific roles such as border and maneuver training in arid terrain, though the vehicle's mobility in environments was later criticized by the UAE operator. Local maintenance facilities handled routine servicing with ongoing support from Italian-supplied spare parts, ensuring operational readiness throughout the 1980s and 1990s. The OF-40 did not participate in any major combat operations during its service with the UAE.

Withdrawal and Current Status

The began phasing out the OF-40 from active service in the 2010s, as the tank's design proved inadequate against evolving battlefield threats, including improvised explosive devices (IEDs) and top-attack munitions that exploited its relatively thin roof and side armor inherited from the 1 platform. This obsolescence was compounded by operational limitations, such as limited mobility in desert environments, the 105 mm main gun's reduced effectiveness compared to contemporary 120 mm weapons, and a commander's sight that, despite improvements, was considered limited compared to later designs. By the mid-2010s, the UAE had transitioned to more advanced platforms, with the final OF-40 units withdrawn from front-line duties around 2014 in favor of the French Leclerc , which offered superior protection, firepower, and electronics. As of 2023, the UAE's 36 OF-40 Mk.2 tanks and 3 associated armored recovery vehicles (ARVs) are no longer in operational service, with most believed to be in long-term storage rather than active scrapping, though exact numbers remain classified. The UAE's broader military modernization efforts, led by the EDGE Group in collaboration with international partners like KNDS France, have prioritized upgrades to the Leclerc fleet and integration of next-generation systems, rendering the aging OF-40 surplus to requirements. Earlier proposals to repurpose the stored hulls, such as the 2005-2010 Golden Unit heavy infantry fighting vehicle (HIFV) project that converted one OF-40 into a prototype with a front-mounted engine, rear troop compartment for four dismounts, and a Russian BMP-3 turret, did not advance beyond testing due to unspecified issues, leaving the initiative unconfirmed for fleet-wide application. The OF-40's legacy endures in Italian armored vehicle design, particularly as a developmental precursor to the C1 , where lessons from the OF-40 Mk.3 upgrade prototype—involving a 120 mm gun, improved fire control, and composite armor—informed the 's emphasis on enhanced lethality and protection for domestic service.

Variants

Main Variants

The OF-40 was produced in limited primarily for export to the (UAE), with each iteration incorporating incremental improvements in fire control, propulsion, and adaptation to desert conditions. The initial Mk.1 served as the baseline model. The Mk.1, developed as a prototype by and , featured an unstabilized 105 mm L/52 rifled gun and offered an optional V-12 producing 830-850 hp. Only two prototypes were built, and while intended for basic export sales, 18 units were produced and delivered to the UAE (specifically ) starting in 1981, all of which were later upgraded. The Mk.2 represented the primary production variant, introducing a fully stabilized with and improved optics, such as the SFIM VS580-B sight, while standardizing the MTU MB 838 CaM-500 V-10 at 830 hp. A total of 36 Mk.2 tanks were delivered to the UAE between 1981 and 1985, including 18 newly built units and 18 conversions from the earlier Mk.1 deliveries. The UAE fleet was later refitted with the MTCA V-12 supercharged delivering 1,000 hp for enhanced mobility in hot climates. The thermal imaging system was developed experimentally for improved night and low-visibility operations but was not adopted fleet-wide. These upgrades optimized performance for desert environments without altering the core 105 mm armament or armor layout. The Mk.3 prototype was developed in the late 1980s as an upgrade proposal to modernize the design, featuring a 120 mm gun similar to that of the Italian tank and a V-12 MTCA rated at 1,000 hp, with composite armor enhancements that increased combat weight to 47.5 tonnes. A single prototype was built and showcased to the UAE in the early 2000s as a potential fleet replacement, but the offer was rejected in favor of the French .

Derivatives and Proposals

The OF-40 chassis served as the basis for several specialized derivatives and unproduced proposals, primarily aimed at support roles and export opportunities. One key variant was the Armored Recovery Vehicle (ARV), developed by and specifically for the (UAE). Three units were produced and delivered to the UAE, utilizing the standard OF-40 hull without a turret but incorporating an 18-ton hydraulic crane, a 35-ton , a dozer blade for stabilization, and a 7.62mm for self-defense. These vehicles, crewed by four personnel, weighed approximately 45 tons and were designed for towing and repairing disabled tanks in desert environments. Among the proposed air defense systems, OTO Melara explored mounting a twin 35mm Oerlikon anti-aircraft turret on the hull, creating a self-propelled anti-aircraft (SPAAG) for short-range protection against low-flying . This concept, sometimes referred to as the ATAK-35, remained at the stage with no production, due to competition from more advanced radar-guided systems. A more ambitious SPAAG proposal was the , which featured a 76mm rapid-fire in a dedicated turret on a modified or Palmaria-derived chassis. Only two prototypes were built and tested between 1981 and 1989, but the project was abandoned in favor of missile-based defenses, with no units entering service. The Palmaria self-propelled represented a successful derivative, adapting the chassis with a rear-mounted 750 hp and a large turret housing a 155mm . Approximately 160 units were exported to and 25 to , providing divisional support with a range of up to 24 km. In the UAE, efforts to repurpose stored hulls led to the Sabiex Heavy Infantry Fighting Vehicle (HIFV), known as the "Golden Unit," developed in a joint UAE-Belgian project from 2005 to 2010. This prototype relocated the engine to the front for a rear troop compartment accommodating up to eight infantry, topped with a Russian turret armed with a 100mm low-pressure , 30mm , and AT-10 missile launcher; only one example was built and tested but not adopted for service. Proposals as of the early 2020s have been made to convert the UAE's withdrawn fleet into heavy IFVs, leveraging surplus hulls to create modernized platforms with enhanced infantry transport and firepower, though no new prototypes have been publicly confirmed beyond the Sabiex effort.
Add your contribution
Related Hubs
User Avatar
No comments yet.