Hubbry Logo
20 mm Polsten20 mm PolstenMain
Open search
20 mm Polsten
Community hub
20 mm Polsten
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
20 mm Polsten
20 mm Polsten
20 mm Polsten
View on Wikipedia
from Wikipedia

The Polsten was a Polish development of the 20 mm Oerlikon gun. The Polsten was designed to be simpler and much cheaper to build than the Oerlikon, without reducing effectiveness.

Key Information

Development

[edit]

When Nazi Germany invaded Poland in 1939, the Polish design team evacuated to the UK and resumed work together with British designers. The need for the Polsten was apparently mooted in June 1941. It went into service in March 1944 alongside the Oerlikon. Both the Oerlikon and the Polsten used similar 60 round drum magazines, although the Polsten could also use a simpler box magazine with 30 rounds. It remained in service into the 1950s.

Use

[edit]

Compared to the Oerlikon's 250 parts, the Polsten had only 119, but it matched the Oerlikon's effectiveness and reliability. The simpler design of the Polsten cannon made its production much cheaper. The cost of one Oerlikon cannon was about £350, while the cost of the Polsten was between £60 and £70. In January 1944, the 21st Army Group decided that only 20 mm Polsten guns would be used as a standard light anti-aircraft gun in place of the Oerlikon to simplify supply. It was used by the anti-aircraft platoons of some British infantry battalions during the Western European campaign of 1944-45. It equipped airborne units in the anti-aircraft role, and was employed in Operation Market Garden. The gun was placed on a wheeled mounting that could be towed behind a jeep.

The Polsten gun was used on armoured vehicles equipped with anti-aircraft guns that were based on the Cromwell/Centaur tank and for the Skink anti-aircraft tank.

The Polsten was also mounted on British LVTs and on early models of the Centurion tank, not coaxially with the main gun but in an independent mount on the left hand side of the turret. Various double, triple and quadruple mounts were developed. John Inglis Limited of Toronto, Ontario, in Canada produced many thousands of guns and some 500 quadruple mountings that saw limited service at the end of the war. These multiple mounts were both trailered and truck-mounted. Polsten Guns, magazines and ammunition boxes were also made in Australia by Holden's Woodville and Beverley plants during World War II. They were used by the Australian Army onshore and on small boats. Several prototype gun mountings were also developed but did not see service.

Users

[edit]

See also

[edit]

Notes

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

20 mm Polsten

View on Grokipedia
from Grokipedia
The 20 mm Polsten was a lightweight automatic cannon of 20 mm calibre, developed during as a simplified and economical derivative of the Swiss Oerlikon 20 mm anti-aircraft gun, primarily employed for low-level aerial defence by Allied forces. Development of the Polsten began in in 1939 under the direction of Polish engineers seeking to produce a more affordable version of the Oerlikon, but the German invasion forced the team to evacuate to the , where they collaborated with British and Czech designers to complete the project. The resulting design drastically reduced complexity by cutting the number of parts from approximately 250 in the Oerlikon to just 119, enabling faster manufacturing and lower costs—around £60 to £70 per unit compared to £320 to £350 for the Oerlikon—while maintaining comparable performance. Production commenced in the UK by the Sten Gun Corporation in late 1943, with the first 240 units delivered by that year, and scaled up significantly in 1944 to over 13,000 guns; additional manufacturing occurred in by John Inglis Limited in , yielding approximately 4,000 units. The gun operated on an advanced primer ignition blowback system, firing 20×110 mm at a cyclic rate of 450 rounds per minute with a of 2,725 feet per second (830 m/s), and it weighed 121 to 126 pounds (55 to 57 kg) unloaded, with a barrel of about 4 feet 9 inches (1.45 m). It featured a quick-change barrel for sustained fire, fed by 30-round box magazines or 60-round drum magazines weighing up to 64 pounds when full, and offered an effective vertical range of 6,630 feet (2,020 m) against low-flying targets, with elevation from -5 to +85 degrees and full 360-degree traverse in mounted configurations. Primarily serving as a towed anti-aircraft on a single-gun wheeled or in double, triple, and quadruple mounts on jeeps, trucks, or trailers, the Polsten saw extensive use by British, Canadian, Polish, and Australian forces from 1944 onward, including in the Normandy campaign, , and defence against V-1 flying bombs in northwest Europe. It was also integrated as secondary armament on vehicles such as the Canadian (with four guns), and Cromwell tanks, and amphibious LVTs, proving effective against dive-bombers and strafing aircraft but entering service too late for widespread combat impact before the war's end in 1945. Postwar, surplus units were employed in training and reserve roles by armies into the early 1950s, though the design's simplicity made it less adaptable to emerging threats compared to heavier calibres.

Design and development

Origins in Poland

The development of the 20 mm Polsten anti-aircraft gun originated in Poland in the late , where a team of Polish engineers began work on a simplified version of the to address the need for a low-cost, easily producible weapon amid rising tensions in . The design effort started in , drawing inspiration from the Oerlikon as a baseline while incorporating elements of earlier Becker-type mechanisms for its blowback operation. Pre-war testing in Poland focused on validating these mechanisms to ensure reliability under mass-production conditions. Key innovations during this initial phase included a drastic reduction in component count from the Oerlikon's approximately 250 parts to just 119, achieved by eliminating intricate systems and employing stamped for greater simplicity and speed in . This approach prioritized conceptual over the Oerlikon's more elaborate engineering, allowing for potential clandestine production even under constrained resources. The prototype was completed in 1939 shortly before the German invasion, and the designs were smuggled out by the Polish engineers who evacuated to the United Kingdom. These early efforts laid the foundational blueprint for the weapon, which was later refined abroad.

Refinement in the United Kingdom

Following the German invasion of Poland in September 1939, the Polish design team responsible for the initial Polsten concept evacuated to the United Kingdom, where they continued development in collaboration with British engineers. By 1940-1941, this exiled team had partnered with the Royal Ordnance Factory at Enfield to prototype the weapon, focusing on adapting it for British production needs. The name "Polsten" is a portmanteau of "Pol" (Poland), "Sten" (after designers Shepard and Turpin), and "En" (Enfield). The refinements emphasized simplification of the Oerlikon-inspired design, incorporating an advanced blowback operation with a fixed barrel and lighter recoil springs to enhance reliability and ease of manufacture. These changes reduced the number of components from approximately 250 in the Oerlikon to 119, while maintaining compatibility with the 20×110 mm ammunition. Trials conducted between 1942 and 1943 at British testing grounds demonstrated the Polsten's superior reliability under field conditions compared to its predecessor. The first full prototypes were tested in , confirming the design's viability for anti-aircraft roles. A cost analysis at the time revealed the Polsten could be produced for £60-£70 per unit, a fraction of the Oerlikon's £350, making it attractive for mass adoption. In January 1944, the standardized the Polsten as the primary 20 mm anti-aircraft gun, mandating its replacement of Oerlikon models to streamline logistics and reduce supply chain complexities across Allied forces. This decision marked the culmination of the Polish-British engineering efforts, transitioning the weapon from prototype to operational standard.

Production and manufacturing

The 20 mm Polsten gun entered production in the in late 1943, with initial output reaching 240 units by the end of that year, primarily through simplified construction methods that reduced the number of components from 250 in the Oerlikon design to 119, enabling fewer machining operations and the use of cheaper materials. This design refinement allowed for rapid without requiring specialized tooling, cutting costs to approximately £60–£70 per gun compared to £320–£350 for the Oerlikon. In 1944, British production scaled significantly to 13,588 guns, alongside 1,169 universal mountings and 1,187 traveling platforms, with additional contributions from the Eastern Group totaling 470 guns. Concurrently, primary manufacturing began in under John Inglis Limited of , , starting in 1943 with one prototype gun and 243 universal mountings, expanding to 7,051 guns and 9,497 mountings by the end of 1944, yielding over 7,000 units overall from this facility by war's end. Secondary production occurred in from 1944 at General Motors-Holden's Woodville and plants, which assembled 988 guns along with magazines and ammunition boxes to support local forces. The first deliveries of completed Polsten guns to British forces occurred in , facilitating their integration into anti-aircraft defenses across multiple theaters. Overall wartime output across the , , and is estimated at 21,000–22,000 units, including variants and mountings, though exact totals vary by source due to classified records.
YearUK GunsCanadian GunsAustralian GunsTotal Guns
19432401-241
194413,5887,05198821,627
Total13,8287,05298821,868
Post-war, surplus Polsten guns were refurbished and employed in training roles within forces into the mid-1950s, though new production ceased shortly after 1945.

Design characteristics

Mechanical operation

The 20 mm Polsten operated on an advanced primer ignition () blowback principle with a fixed barrel, as a simplified derivative of the Oerlikon gun's similar mechanism. In this system, the heavy bolt mass and springs provided the necessary delay to keep the breech closed until chamber had sufficiently dropped after ignition, ensuring safe and reliable cycling without the need for a positive lock. The feature ignited the primer as the bolt was still accelerating forward under spring tension, countering much of the rearward impulse and allowing effective operation with the relatively powerful 20 mm cartridge. The firing sequence began with activation of the trigger—either manual or electrical via a in mounted configurations—which released the bolt from its battery position. Upon pulling the trigger, the struck the primer of the chambered round, propelling the forward while the expanding gases drove the unlocked bolt rearward against the spring. This motion extracted and ejected the empty case through the ejection , after which the spring returned the bolt forward to strip a fresh round from the top-mounted and chamber it, readying the weapon for the next shot. The design's simplicity minimized potential failure points during this cycle. Safety mechanisms included a manual selector to block the trigger and , preventing unintended discharge, along with a feed tray interrupter that interrupted bolt movement if the tray was empty or improperly loaded, thereby avoiding firing or jams. The , typically around 450 rounds per minute, could be adjusted by varying the recoil spring tension to suit operational needs. A key aspect of the Polsten's design was its use of just 119 total parts—far fewer than the Oerlikon's approximately 250—enabling rapid field stripping and maintenance in under five minutes by minimally trained personnel.

Ammunition and feed system

The 20 mm Polsten gun utilized standard 20 × 110 mm RB Oerlikon ammunition, which was rimmed and designed for reliable feeding in blowback-operated autocannons. This cartridge was not unique to the Polsten but fully interchangeable with existing Oerlikon stocks, facilitating logistics during World War II by leveraging established supply chains for British and Commonwealth forces. Common variants included high-explosive (HE), high-explosive incendiary (HE-I), high-explosive tracer (HE-T), armor-piercing tracer (AP-T), and semi-armor-piercing (SAP) projectiles, optimized for anti-aircraft and light ground target engagement. The complete round weighed approximately 0.241 kg, with the projectile portion around 0.123 kg, depending on the variant; for example, the HE projectile carried a bursting charge of about 0.011 kg. Tracer rounds were particularly emphasized for anti-aircraft roles, providing visible trajectories to aid targeting of low-flying aircraft. No Polsten-specific ammunition was developed, ensuring compatibility with British-developed Oerlikon loads that incorporated propellants similar in composition to those used in .303-inch rifle cartridges for consistent performance. The feed system supported both a 60-round for sustained fire in static or vehicle-mounted configurations and a lighter 30-round top-mounted box magazine for portable or airborne applications, allowing quick top-loading and reloads in combat. The drum magazines were directly interchangeable with those of the Oerlikon Mk II, weighing about 29 kg when loaded, while the box design simplified production and reduced weight for mobile use. This dual-feed capability enhanced the Polsten's versatility without requiring specialized logistics.

Technical specifications

Physical attributes

The 20 mm Polsten autocannon measures 2.18 m in overall length, with a barrel length of 1.45 m. Its unloaded weight is 55-57 kg, rising to approximately 68 kg when fitted with a loaded 30-round drum magazine. The gun is chambered in 20 mm caliber. The barrel incorporates rifling consisting of 9 grooves with a right-hand twist to impart rotational stability to projectiles. Construction emphasizes simplicity and economy, utilizing pressed and stamped components in place of more machined parts found in the parent Oerlikon design, which contributed to a lighter overall weight of 55-57 kg compared to the Oerlikon's 68 kg. As an advanced primer ignition blowback-operated weapon, it requires no hydraulic system.

Performance metrics

The 20 mm Polsten gun achieved a of 830 m/s (2,723 ft/s) when firing standard high-explosive rounds, providing sufficient ballistic performance for anti-aircraft engagements. This velocity contributed to an of 1,000 m against aerial targets, with a maximum range extending to 2,000 m, though practical accuracy diminished beyond the effective ceiling due to projectile drop and dispersion. The cyclic was 450 rounds per minute, enabling rapid bursts against low-flying . Ammunition types, particularly high-explosive variants, directly influenced this and overall stability. The Polsten demonstrated reliability comparable to the Oerlikon, with its simpler blowback mechanism reducing and maintenance needs, particularly in adverse environments.

Operational history

World War II service

The 20 mm Polsten gun entered service with British and forces in March 1944, seeing its initial combat deployment with the during the campaign. Primarily configured in towed quadruple mounts, it provided essential divisional anti-aircraft protection against low-flying aircraft supporting German ground forces. This standardization followed a decision by to adopt the Polsten exclusively as the light anti-aircraft weapon, streamlining ammunition logistics across diverse units previously using mixed 20 mm systems. In key operations, the Polsten proved vital for low-level air defense during in September 1944. Assigned to the 1st Airborne Division's Reconnaissance Squadron, the guns were towed by jeeps and airlifted via Horsa gliders to , where they engaged enemy aircraft and provided against ground threats despite intense urban fighting. Their high —up to 450 rounds per minute per gun—made them effective in the chaotic airborne environment, though logistical challenges like reversing the barrel for towing limited rapid repositioning. By early 1945, Polsten guns supported the Allied Rhine crossings (Operation Plunder), deployed in towed and vehicle-mounted configurations to shield bridgeheads and amphibious assaults from sporadic German air interdiction. Triple and quadruple mounts positioned along the riverbanks at Rees, Xanten, and Wesel offered critical protection during the rapid advance into Germany. Vehicle integrations expanded the Polsten's versatility in late-war service. Centurion Mk 1 prototypes featured the gun in an independent turret mounting alongside the 17-pounder main gun, with prototypes trialed in Germany by the 22nd Armoured Brigade in June 1945, though the European war ended before combat deployment. The Canadian Skink anti-aircraft vehicle, mounting four Polsten guns in a modified M4A1 turret, entered limited service in 1945 with the First Canadian Army near Kalkar and the Hochwald Gap, repurposed for infantry fire support amid Allied air superiority. British LVT-4 amphibious tractors, fitted with a single Polsten and auxiliary machine guns, were used in northwest Europe, including the Rhine crossings, where they facilitated troop transport under fire. Overall, the Polsten's simplified design and compatibility with existing 20 mm Oerlikon enhanced logistical efficiency for anti-aircraft units, enabling sustained operations without the supply complexities of pricier alternatives. Its reliability in towed and mobile roles contributed to broader defensive efforts, bolstering cover during the final push.

Post-war employment

Following , surplus stocks of the 20 mm Polsten gun enabled its allocation to reserve and forces within the for training and defensive roles between 1946 and 1950. In the , the weapon continued in service through the early 1950s, often in towed or static anti-aircraft mountings to support territorial defense. Production of the Polsten persisted until 1954, reflecting ongoing demand for low-cost light anti-aircraft systems during the early period. Australian militia units received Polsten guns for training and border security, with notable employment during the (1950–1953). Personnel from the 3rd Battalion, The Royal Australian Regiment (3RAR), conducted live-fire and handling drills with the 20 mm Polsten in Haramura, , on 14 July 1950, immediately prior to their deployment to Korea. Once in theater, the gun served in static anti-aircraft capacities, primarily for rear-area protection and airfield defense against low-flying threats. Canadian reserves also incorporated Polsten guns from wartime production, with examples mounted on vehicles like the self-propelled anti-aircraft platform retained in storage or for training into the postwar era. By the late 1950s, the Polsten was largely phased out across these forces in favor of the more versatile 40 mm gun, as its design proved inadequate against the speeds of emerging .

Variants and mountings

Towed and static configurations

The 20 mm Polsten gun was adapted for single towed configurations on a lightweight wheeled carriage, enabling anti-aircraft units to provide mobile air defense against low-flying threats. The Universal Mounting Mk I No. 2 cradle, specifically designed for the Polsten, weighed 218 kg in total, incorporating the 55 kg gun itself and allowing for a full 360-degree traverse with an elevation range of -5 to +85 degrees. This compact setup could be towed behind a , facilitating rapid repositioning in forward areas without requiring heavy prime movers. Its design emphasized simplicity and low cost, making it ideal for divisional light anti-aircraft regiments seeking quick-deployable protection. For enhanced firepower, the Polsten was mounted in quad configurations with four guns arranged on a central , delivering a combined up to 1,800 rounds per minute for intense barrage against . The complete quad mount, including hydraulic controls for aiming, had a total weight of 3,134 kg—broken down as 1,777 kg for the mounting, 600 kg for the platform, and 757 kg for the two-wheeled carriage—allowing it to be towed by light trucks or emplaced statically. Each gun fed from 60-round Oerlikon-style drum magazines, and the system supported an optional powered traverse for faster targeting in high-threat environments. This arrangement proved effective for area denial, with an operational ceiling around 6,630 feet. Static emplacements of the Polsten, often using the quad or single mounts without the , were installed for fixed defenses at airfields and key installations, providing persistent coverage against dive-bombers and guided weapons like the . Deployments included protecting Allied ports such as in late 1944, where the guns' high compensated for their light projectile weight in engaging low-altitude targets. These ground-based setups benefited from the Polsten's overall lightness and mechanical reliability, enabling crews to achieve operational readiness faster than with bulkier 40 mm systems, thus suiting rapid reinforcement of vulnerable forward positions.

Vehicle and naval integrations

The Polsten 20 mm autocannon was adapted for armored vehicle mounts to provide anti-aircraft and secondary . Early trials in 1944 integrated a single Polsten cannon on the turret roof of the Mk 1 prototype, serving as a secondary armament alongside the 17-pounder main gun in an independent mounting to enhance close-range defense capabilities. In , the weapon saw more extensive application in the self-propelled anti-aircraft vehicle, where a quadruple mounting of Polsten Mk I guns was fitted into a modified M4A1 Sherman turret, replacing the original 75 mm armament to counter low-flying aircraft. This configuration used 60-round drum magazines adapted from Oerlikon designs, though production was limited to a few pilot vehicles by mid-1944 before the program was canceled. Amphibious integrations focused on enhancing for beach assaults in North-West . British-modified LVT-4 landing vehicles were equipped with a single 20 mm Polsten mounted forward, supplemented by two .30 caliber , to provide during troop debarkation. These adaptations saw limited deployment in operations such as the Rhine crossing, prioritizing mobility over heavy armament in amphibious environments. For mobile ground-based anti-aircraft roles, the Polsten was mounted on Canadian Military Pattern (CMP) Ford trucks, creating lightweight portee configurations such as single or quadruple gun setups on 15-cwt for rapid deployment in forward areas. These truck-mounted variants, often designated as Polsten Portee, emphasized quick setup and traversal, with numerous units produced during to bolster divisional air defense. Vehicle-specific modifications included reinforced mechanisms to mitigate and shock from rough or sea motion, ensuring reliable operation in dynamic environments.

References

  1. https://www.militaryfactory.com/armor/detail.php?armor_id=1061
  2. https://edencamp.co.uk/polsten-turret-2/
  3. http://www.anti-aircraft.co.uk/polstenquad.html
  4. https://www.silverhawkauthor.com/post/artillery-in-canada-quadruple-20-mm-polsten-anti-aircraft-machine-gun
  5. https://paradata.org.uk/content/4663423-polsten-20mm-cannon
  6. https://www.historicalfirearms.info/post/151854983984/ordnance-polsten-20mm-cannon-developed-by-polish
  7. http://www.wwiiequipment.com/index.php?option=com_content&view=article&id=82:polsten-anti-aircraft&catid=41:anti-aircraft&Itemid=61
  8. http://www.navweaps.com/Weapons/WNUS_2cm-70_mk234.php
  9. https://www.ibiblio.org/hyperwar/USN/ref/MG/I/MG-5.html
  10. https://archive.org/details/FirearmsTheDevelopmentOfAutomaticCannonHeavyMachineGunsAndTheirAmmunitionForArmiesNaviesAndAirForces
  11. https://digitalcommons.unl.edu/context/dodmilintel/article/1071/viewcontent/DA_Pam_30_115_58__optimized.pdf
  12. https://tanks-encyclopedia.com/ww2/canada/skink-anti-aircraft-grizzly-tank/
  13. https://maritime.org/doc/pdf/gun20mm-26-pubs-5566-ammo.pdf
  14. http://www.wwiiequipment.com/index.php?option=com_content&view=article&id=82:polsten-anti-aircraft&catid=41:anti-aircraft&Itemid=58
  15. https://www.warlordgames.com/new-british-airborne-polsten-cannon/
  16. http://www.acant.org.au/Articles/PolstenAutomaticCannon.html
  17. https://www.warhistoryonline.com/world-war-ii/1945-crossing-the-rhine-pictures.html
  18. https://tankmuseum.org/tank-nuts/tank-collection/centurion
  19. https://www.warlordgames.com/focus-the-lvt/
  20. https://wwiitanks.co.uk/FORM-Gun_Data.php?I=10
  21. https://www.awm.gov.au/collection/C291072
  22. https://www.awm.gov.au/collection/C291064
  23. https://captainstevens.com/military/weapons/20mm-aa-guns/
  24. https://www.armedconflicts.com/Universal-20-mm-Gun-Mk-1-No-2-cradle-Polsten-t46930
  25. https://military-history.fandom.com/wiki/20_mm_Polsten
  26. https://tanks-encyclopedia.com/operation-sentry-the-first-centurion-trials-1945/
  27. https://www.tankarchives.com/2023/03/anti-aircraft-lizard.html
  28. https://www.militaryfactory.com/armor/detail.php?armor_id=402
  29. http://www.mapleleafup.net/forums/showthread.php?t=6473
  30. https://forum.warthunder.com/t/truck-15-cwt-4x2-a-a-ford-f-15-chassis/9288
Add your contribution
Related Hubs
User Avatar
No comments yet.