Recent from talks
Nothing was collected or created yet.
Superbone
View on WikipediaSuperbone | |
| Brass instrument | |
|---|---|
| Classification | |
| Hornbostel–Sachs classification | 423.2 (Sliding and Valved aerophone sounded by lip movement) |
| Developed | Mid-19th century; late 20th century revival |
| Related instruments | |
| Musicians | |
| |
| Builders | |
The superbone (sometimes known as the double trombone) is a hybrid tenor trombone in B♭ that has both a slide like a regular trombone and a set of valves like a valve trombone. It is a relatively rare instrument.
History
[edit]Trombones that combine both a slide with a set of valves were built as early as the 1860s by Besson.[1] One of the earliest surviving examples was built by Conn in 1884, and closely resembles the modern superbone that appeared in the 1970s.[2] Conn manufactured them through the early 20th century, and a similar instrument with a shorter four-position slide, the valide, was invented by jazz musician and machinist Brad Gowans in 1946.[3][4]
The term "superbone" was first coined in the 1970s as a name for the instrument patented by Larry Ramirez of Holton Musical Instruments in collaboration with jazz trumpeter and bandleader Maynard Ferguson.[5][6] It is very similar to the early Conn hybrid instruments from the 19th century, with a very narrow bore of 0.484 inches (12.3 mm) and three piston valves.[7] It has a slide lock, which frees the player to operate the valves or the slide with either hand, and was manufactured by Holton as the model TR-395 "Superbone" between 1974 and 2004.[8]
The Holton became a staple instrument for Ferguson, and American jazz musician and composer Don Ellis in his later career. Ferguson used the superbone on the recording "Superbone Meets the Bad Man" from his 1974 Chameleon album. Ashley Alexander, another proponent of the instrument, used it on his Secret Love album.[9] Alexander referred to the instrument as a "double trombone" and wrote a method for it, published by Leblanc in 1980.[8][10]
Later developments
[edit]In the early 2010s James Morrison in conjunction with Austrian instrument manufacturer Schagerl created his own version of a superbone, employing a larger 0.525-inch (13.3 mm) bore and three rotary valves operated by the left hand.[11] This arrangement allows the player to use the valves and slide independently or simultaneously.[12] Wessex Tubas also manufacture a superbone with the same larger 0.525-inch (13.3 mm) bore, but with three piston valves similar to the Holton.[13]
Construction
[edit]Superbones, unlike the valide, have a fully functioning trombone slide with the usual seven positions. The Holton and Wessex instruments are assembled from three detachable sections; the slide and bell sections attach to each end of the valve assembly, built with three piston valves arranged in the same manner as on other three-valved brass instruments. The player grips the valve section with the left hand, which supports the weight of the instrument while the right arm is free to operate the slide.[8] The James Morrison Schagerl model has the two sections of a normal tenor trombone (slide and bell), with three rotary valves and their tubing incorporated in the bell section in a similar manner to F attachments.[12]
Early superbones, and the Holton instrument designed for Ferguson (who was primarily a trumpet player), have very narrow almost trumpet-like bore diameters of less than 0.500 inches (12.7 mm). Later models from Schagerl and Wessex use a larger bore of 0.525 inches (13.3 mm) found more commonly on modern tenor trombones.
Technique
[edit]The Superbone can be played as a slide trombone, a valve trombone, or in combination. Using the slide and valves in combination requires the slide positions to be adjusted, just as when using the trigger of an F attachment on a tenor or bass trombone. Using the slide with the first and third valves engaged has the same effect as using an F attachment. Conversely, the valves can be used to provide trills and ornaments for passages played with the slide.[12]
See also
[edit]- Firebird, a trumpet with both valves and slide.
- Valide trombone, a similar instrument with a shorter slide of four positions.
References
[edit]- ^ Yeo 2021, p. 46–7, "duplex instrument".
- ^ "Rare 1884 C.G. Conn Valve-Slide Hybrid Trombone". Worthopedia. WorthPoint Corporation. Archived from the original on 30 May 2022. Retrieved 9 June 2022.
- ^ "Really Doubling in Brass". Popular Science. 146 (5): 81. May 1946. (Google Books)
- ^ Yeo 2021, p. 161, "valide".
- ^ "Holton TR395 Superbone". G. Leblanc. Archived from the original on 21 March 2006.
- ^ US patent 3937116, Lawrence, Ramirez, "Tenor trombone construction", issued 8 June 1976, assigned to G. Leblanc Corporation, class G10D7/10
- ^ Guion 2010, p. 62.
- ^ a b c Yeo 2021, p. 143, "Superbone".
- ^ The Ashley Alexander Big Band (1988). "Secret Love". Discogs. Discovery Records. Retrieved 20 October 2022.
- ^ Alexander, Ashley (1980). The Double Trombone. G. Leblanc Corporation. OCLC 17861481.
- ^ "Trombone Model 'Superbone'". schagerl.com. Schagerl Meisterinstrumente. Retrieved 30 May 2022.
- ^ a b c Schagerl (2 September 2013). "James Morrison talking about the new Schagerl Trombone Model 'Superbone'". YouTube. Retrieved 30 May 2022.
- ^ "Superbone (valve/slide trombone) – PB930". www.wessex-tubas.com. Wessex Tubas. Retrieved 31 May 2022.
Bibliography
[edit]- Guion, David M. (2010). A History of the Trombone. Toronto: The Scarecrow Press. ISBN 978-0-8108-7445-9. LCCN 2010000846. OCLC 725775517. OL 24019524M. Wikidata Q111039945.
- Yeo, Douglas (2021). An Illustrated Dictionary for the Modern Trombone, Tuba, and Euphonium Player. Dictionaries for the Modern Musician. Illustrator: Lennie Peterson. Lanham: Rowman & Littlefield. ISBN 978-1-5381-5966-8. LCCN 2021020757. OCLC 1249799159. OL 34132790M. Wikidata Q111040546.
External links
[edit]
Media related to Superbones at Wikimedia Commons- Ferguson, Maynard (1974). Chameleon: 8. Superbone Meets The Bad Man (Audio recording). CBS Records. Retrieved 12 September 2023 – via YouTube.
Superbone
View on GrokipediaHistory
Origins and Early Development
Early precursors to the superbone, such as the duplex trombone, originated in the mid-19th century as a hybrid brass instrument designed to combine the slide mechanism of a traditional tenor trombone with valve controls for enhanced pitch variation. In 1864, French instrument maker Gustave Besson introduced this innovation in Paris, creating a tenor trombone pitched in B♭ that integrated a slide with three piston valves, allowing players to alternate between slide-based intonation and quicker valve-actuated changes. This design aimed to address limitations in both slide and valve trombones, offering greater flexibility for performers in ensembles.[4] Early production of the duplex trombone was limited, with one of the first commercial examples emerging from the American firm C.G. Conn in 1884, a rare valve-slide hybrid tenor model that exemplified the instrument's dual functionality through basic piston valves mounted parallel to the slide section. These valves, typically three in number, connected to auxiliary tubing that bypassed the slide, enabling rapid chromatic passages while preserving the trombone's characteristic slide glissandi. Under the Hornbostel–Sachs classification system, the superbone is categorized as 423.232, an aerophone sounded by lip vibration with a sliding mechanism, though its valve integration aligns it closely with hybrid variants in 423.23.[5][6] In the 1940s, jazz musician Brad Gowans invented the valide trombone, a hybrid instrument combining three piston valves and a short slide, which served as a direct predecessor to later designs but saw limited adoption. Despite its ingenious features, the duplex trombone saw limited adoption in the late 19th and early 20th centuries, primarily due to the technical challenges of manufacturing precise valves that maintained intonation comparable to single-mode slide trombones, as well as musicians' established preference for the pure tone and expressive control of traditional slides. These early models appeared sporadically in experimental brass ensembles, such as innovative military and civilian bands in Europe and America, where their versatility supported novel harmonic explorations in group settings. However, the complexity of dual mechanisms often led to reliability issues, restricting widespread use until later revivals.[7][8]Revival and Popularization
The Superbone underwent a significant revival in the 1970s through the efforts of Larry Ramirez, a designer at the Holton Musical Instrument Company, who collaborated closely with jazz trumpeter Maynard Ferguson to refine and promote the instrument. Ferguson, inspired by a prototype demonstrated by Ramirez, coined the name "Superbone" and became its most prominent early advocate, integrating it into his performances and recordings starting in 1974. This revival culminated in the introduction of the Holton TR-395 model in 1974, a hybrid tenor trombone featuring both a traditional slide and three piston valves, along with a slide lock mechanism that allowed players to secure the slide in place for valve-only operation.[9] The TR-395 was manufactured by Holton from 1974 until 2004, marking a three-decade production run that established the Superbone as a recognized specialty instrument in professional circles.[10] The instrument gained traction during the 1970s and 1980s through its adoption in jazz and big band contexts, where performers like Ferguson and composer Don Ellis utilized its versatility for dynamic solos and ensemble work, blending the expressive slide technique with the precision of valved playing. This period saw increased visibility in jazz ensembles, contributing to broader awareness among musicians despite its niche appeal. In the early 2010s, the Superbone received further momentum through Australian multi-instrumentalist James Morrison's collaboration with the Austrian manufacturer Schagerl, resulting in a custom model introduced around 2013 that emphasized enhanced playability and tonal range.[3] The discontinuation of Holton's TR-395 line in 2004 reflected evolving market dynamics, including a shift toward more specialized or digital alternatives in brass instrumentation, though custom and limited-production models like Schagerl's have sustained interest among contemporary jazz performers.Design and Construction
Components and Mechanisms
The superbone is constructed as a duplex tenor trombone pitched in B♭, integrating a traditional handslide for glissando effects with a valve section typically comprising three inline piston or rotary valves to facilitate rapid chromatic navigation. This hybrid design allows independent or simultaneous operation of the slide and valves, enabling players to alternate between legato slide articulations and agile valve-based phrasing without compromising intonation, as the valves are positioned parallel to the slide path to avoid mechanical interference.[1][11] Central to its functionality is the slide lock mechanism, a spring-loaded or thumb-operated latch that secures the outer slide in a fixed position—often first or home position—during valve-only play, preventing unintended movement and ensuring stability for trumpet-like technique. The valve system also incorporates an F-attachment equivalent through the combination of the first and third valves, which lengthens the instrument's tubing to lower the fundamental pitch by a perfect fourth, mimicking the rotary trigger on standard tenor trombones and extending the range downward to facilitate bass register access. Bell section integration occurs via a seamless crook that merges the slide and valve branches into a single flared terminus, typically 8.5 to 9 inches in diameter, optimizing resonance and projection.[12][10] Standard construction employs yellow brass for the body and bell to achieve a bright, projecting tone with good response, paired with nickel-silver or cupronickel for the inner and outer slides to enhance durability and reduce friction during extension. A clear lacquer finish is commonly applied over the brass components for corrosion resistance and aesthetic appeal, while valves feature monel pistons with nylon guides for smooth, quiet action. Bore dimensions generally range from 0.484 to 0.525 inches, with narrower bores promoting quicker articulation and brighter timbre through restricted airflow, and wider bores supporting fuller volume and darker resonance for ensemble blending.[10][1][11]Variations by Manufacturer
Post-revival, the Holton TR-395 stands as a seminal modern model, produced from the 1970s through 2004 and tailored for jazz performance. It features a 0.484-inch (12.29 mm) bore, a 9-inch yellow brass bell, and three monel piston valves with nylon guides for smooth action, all in a lightweight build that facilitates agile playing in improvisational settings.[10][12] This design, developed in collaboration with jazz icon Maynard Ferguson, prioritizes tonal flexibility and reduced weight for extended sessions.[13] In the early 2010s, Austrian maker Schagerl introduced the "James Morrison" superbone model, optimized for multi-instrumentalists through ergonomic enhancements like a closed-wrap F attachment and simultaneous slide-valve operation. With a 0.525-inch (13.33 mm) bore, an 8.66-inch (220 mm) yellow brass bell, and three rotary valves, it offers a fuller sound projection and balanced handling for versatile repertoire.[3][11][14] The Wessex Tubas PB930 represents a contemporary, budget-friendly iteration, emphasizing accessibility without sacrificing core functionality. Produced as a modern option, it employs a dual bore progressing from 0.500 inches (12.7 mm) to 0.525 inches (13.33 mm), an 8.46-inch (215 mm) bell, and three piston valves, enabling rapid valve passages alongside traditional slide glissandi for diverse musical demands.[1][15]| Model | Bore Size (inches) | Valve Type | Production Period |
|---|---|---|---|
| Holton TR-395 | 0.484 | 3 Piston | 1970s–2004 |
| Schagerl James Morrison | 0.525 | 3 Rotary | Early 2010s–present |
| Wessex PB930 | 0.500–0.525 (dual) | 3 Piston | 2010s–present |
| Besson Duplex (ca. 1864) | N/A | 3 Piston (simple) | Mid-19th century |
| Conn Hybrid (late 19th) | N/A | 3 Piston (simple) | Late 19th century |
