Hubbry Logo
By-productBy-productMain
Open search
By-product
Community hub
By-product
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
By-product
By-product
By-product
View on Wikipedia
from Wikipedia

A by-product or byproduct is a secondary product derived from a production process, manufacturing process or chemical reaction; it is not the primary product or service being produced.

A by-product can be useful and marketable or it can be considered waste: for example, bran, which is a byproduct of the milling of wheat into refined flour, is sometimes composted or burned for disposal, but in other cases, it can be used as a nutritious ingredient in human food or animal feed. Gasoline was once a byproduct of oil refining that later became a desirable commercial product as motor fuel. The plastic used in plastic shopping bags also started as a by-product of oil refining.[1] By-products are sometimes called co-products to indicate that although they are secondary, they are desired products. For example, hides and leather may be called co-products of beef production. There is no strict distinction between by-products and co-products.

In economics

[edit]

In the context of production, a by-product is the "output from a joint production process that is minor in quantity and/or net realizable value (NRV) when compared with the main products".[2] Because they are deemed to have no influence on reported financial results, by-products do not receive allocations of joint costs. By-products also, by convention, are not inventoried, but the NRV from by-products is typically recognized as "other income", or as a reduction of joint production processing costs when the by-product is produced.[3]

The International Energy Agency (IEA) defines by-product in the context of life-cycle assessment by defining four different product types: "main products, co-products (which involve similar revenues to the main product), by-products (which result in smaller revenues), and waste products (which provide little or no revenue)."[4]

In chemistry

[edit]

While some chemists treat "by-product" and "side-product" as synonyms in the above sense of a generic secondary (untargeted) product, others find it useful to distinguish between the two. When the two terms are distinguished, "by-product" is used to refer to a product that is not desired but inevitably results from molecular fragments of starting materials and/or reagents that are not incorporated into the desired product, as a consequence of conservation of mass; in contrast, "side-product" is used to refer to a product that is formed from a competitive process that could, in principle, be suppressed by an optimization of reaction conditions.[5]

Common byproducts

[edit]

See also

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

By-product

View on Grokipedia
from Grokipedia
A by-product is a secondary output generated during an industrial, , chemical, or , alongside the primary intended product. These materials arise incidentally and may vary in value, ranging from marketable resources to waste that requires disposal. Common examples include produced from milling for refined , from churning in the industry, and from timber processing. In and , by-products play a significant role in and cost management. For instance, in the meat processing industry, by-products such as hides, , and bones contribute substantially to economic value. In 2024, variety meats (a key by-product category) generated nearly $1.1 billion in export revenue, with further processing into items like and pharmaceuticals. Similarly, in the agri-food sector, fruit peels and vegetable trimmings—by-products of or operations—can be repurposed into bioactive compounds for nutraceuticals, enhancing profitability while minimizing raw material waste. The utilization of by-products is increasingly vital for and the , as it reduces environmental impacts like use and from waste decomposition. Industrial by-products, such as fly ash from or from production, can be recycled into materials, thereby lowering disposal costs and conserving natural resources. This approach not only drives economic benefits through additional streams but also fosters in waste-to-value chains, aligning with regulatory pressures for reduced .

Definition and General Concepts

Core Definition

A by-product is a secondary or incidental material produced alongside the primary product in a process, typically in smaller quantities and with lower economic value than the main output. This occurs during joint production where the focus is on the principal item, and the by-product emerges unintentionally as a residual or auxiliary result. The concept of by-products gained prominence in the late amid the expansion of large-scale industrial manufacturing, exemplified by the where hides, bones, and other animal parts were utilized as secondary outputs from or production rather than discarded. In the , Chicago's meatpackers began systematically processing , bones, and scraps into edible and inedible by-products, transforming potential into additional revenue streams. Common examples include generated from milling operations, where it arises as fine wood particles from sawing and planing, and from cheese production, the liquid residue separated during formation. By-products are generally unavoidable outcomes of the production , contrasting with the main product in terms of production intent, scale, and priority; they may be sold for minor revenue, repurposed internally, or treated as if no viable use exists. A by-product is distinguished from related terms in production processes based on intent, value, and utility. Unlike the main product, which is the primary intended output of a process with the highest economic value, a by-product is secondary and incidental, arising without separate commercial intent during the manufacture of the main product. In contrast, a co-product emerges alongside the main product with comparable economic value and deliberate production intent, such as and from in the , where both are planned outputs contributing significantly to revenue. A side-product, often used in chemical contexts, refers to an unintended impurity or outcome from alternative reaction pathways that can sometimes be optimized or valorized, but it lacks the planned integration of a co-product. , meanwhile, is a material with no economic value that is discarded or requires disposal, differing from by-products which have some recoverable even if minimal. Classification criteria hinge on production intent, relative economic value, and quantity produced. By-products typically contribute less than 20% of total revenue from a joint process and are not the focus of separate production efforts, whereas co-products share costs and allocation due to their substantial market value. Quantity also plays a role; by-products are produced in smaller volumes relative to the main product, often as residuals, while co-products are generated in proportions that justify independent marketing and sales strategies. These criteria help avoid misallocation in accounting and environmental assessments by clearly delineating secondary outputs. Standards like ISO 14040 provide frameworks for that can support analyses, where by-products may be treated as valuable resources through methods such as system expansion to account for credits from or , rather than traditional allocation. This approach emphasizes potential utility over incidental origin, promoting by treating outputs that were once as inputs for further processes. For example, in early oil refining, was a low-value by-product of production, often discarded due to its incidental nature and minimal revenue contribution at the time. Conversely, in manufacturing, glycerin and are co-products, both intentionally produced with significant market values—glycerin comprising about 10% by weight and supporting separate industries like pharmaceuticals—reflecting their planned joint output and economic parity.

Economic Aspects

Production and Joint Costs

In joint production processes, multiple outputs are generated simultaneously from a single production activity, where the inputs and costs up to the split-off point are shared among the products. For instance, in oil refining, crude oil processing yields gasoline, diesel, and petrochemicals as co-products from the same refining operation. Under standard cost allocation principles for joint products and by-products, joint costs incurred prior to the split-off point are not allocated to by-products, which are considered incidental outputs with relatively low value compared to the main product. Instead, all joint costs are assigned entirely to the primary product(s), and any proceeds from by-product sales are treated as a reduction in the net cost of the main product, thereby lowering the cost of goods sold for the primary output. This approach avoids the complexity and subjectivity of apportioning shared costs to minor outputs. Both U.S. GAAP and IFRS align on this treatment for by-products, recognizing their net realizable value (estimated selling price less completion and disposal costs) as a deduction from the main product's inventory cost or cost of goods sold, rather than as separate revenue. Under GAAP, common methods include the production method, where by-product value is estimated and deducted at production, or the sales method, where deduction occurs upon sale; IFRS under IAS 2 similarly permits deducting by-product net realizable value from main product costs during inventory valuation. For example, if joint production costs total $100,000 and by-product sales generate $10,000 in net proceeds, the net joint costs allocated to the main product would be $90,000, reducing the main product's cost of goods sold accordingly. An illustrative industrial case is lumber processing, where the production of timber boards serves as the main product, and sawdust or wood chips emerge as by-products from the same sawing process. In this scenario, joint costs like log acquisition and sawmill operations are fully charged to the timber boards, with by-product revenues offsetting those costs to reflect the economic reality of the integrated process.

Valuation and Revenue Treatment

In for by-products, the primary valuation method is net realizable value (NRV), defined as the estimated selling price of the by-product in the ordinary course of business minus the estimated costs of completion, disposal, and transportation. This approach is particularly applied when by-products are immaterial relative to the main product and are sold externally, ensuring that their value reflects achievable economic benefits without allocating joint production costs. Under (IFRS), specifically IAS 2 on , by-products are measured at NRV when immaterial, with this value deducted from the cost of the main product to avoid overstating . Similarly, under U.S. Generally Accepted Accounting Principles (GAAP), NRV serves as a benchmark for valuation, though by-products often receive simplified treatment due to their secondary nature. An alternative valuation method is the replacement cost approach, which estimates the cost to acquire or produce an equivalent item if the by-product is utilized internally rather than sold. This method is suitable for scenarios where by-products are reused within the production process, such as in , to maintain consistency in cost tracking without inflating external assumptions. Replacement cost is capped at NRV to prevent overvaluation and is grounded in principles that prioritize the of the by-product in ongoing operations. Revenue from by-product sales is recognized upon transfer of control to the customer, in line with standards like and ASC 606 under , but is typically classified as "other income" on the rather than core . Alternatively, proceeds may be treated as a reduction in the for the main product, effectively lowering joint costs without separate valuation for insignificant by-products. This non-allocation of joint costs to by-products simplifies reporting and complies with materiality thresholds in both IFRS and , where by-products are excluded from if their value is negligible. The valuation and revenue treatment of by-products carries economic implications by incentivizing their utilization to minimize and generate supplementary streams, thereby improving overall efficiency. For instance, in , residues such as are valued at NRV—often around $60–$100 per dry ton as of 2024 based on market prices minus processing costs—to support conversion into bioethanol, turning potential into a source that offsets main production expenses. In bioenergy contexts, the International Energy Agency's Bioenergy Task 38 (established in 2007 and updated through the 2020s) provides classifications for by-products like agricultural residues, aiding in modeling by integrating their NRV into lifecycle assessments of systems.

Chemical Aspects

Formation Mechanisms

By-products in often arise from the inherent of the reaction, where the balanced necessitates the formation of additional beyond the primary product. For instance, in esterification reactions, carboxylic acids react with alcohols in the presence of an acid catalyst to form esters, with emerging as an inevitable by-product due to the mechanism involving , nucleophilic attack, and elimination steps. This process exemplifies how molecular fragmentation and recombination lead to by-product generation, as the hydroxyl group from the acid and the hydrogen from the alcohol combine to form H₂O. Similarly, fragmentation pathways can produce by-products when unstable intermediates decompose, contributing to the overall reaction network. Certain by-products are inevitable in reactions governed by conservation laws, such as those requiring balance of atoms, charge, or mass, where additional species must form alongside the primary product. Other by-products stem from competitive pathways, where parallel reaction routes compete with the desired mechanism, leading to minor products from alternative intermediates or side chains in the . These competitive routes are particularly prominent in multi-step syntheses, where kinetic branching favors unintended formations under non-ideal conditions. The extent of by-product formation is influenced by external factors including , presence, and reactant ratios. Elevated temperatures can accelerate side pathways by lowering barriers for competitive reactions, thereby increasing by-product yields, as observed in catalytic processes where thermal energy promotes undesired decompositions. Catalysts selectively lower the energy for the main pathway but may inadvertently facilitate by-product generation if they activate alternative sites, while deviations from stoichiometric ratios—such as excess reactants—can shift equilibria toward minor products via . For example, in the Haber-Bosch for synthesis (\ceN2+3H2⇌2NH3\ce{N2 + 3H2 ⇌ 2NH3}), optimal high-pressure and iron-based catalysts minimize side reactions, but varying and ratio conditions can promote minor by-products through competing pathways. Analytical techniques are essential for identifying and quantifying by-products, enabling precise characterization of reaction outcomes. (NMR) provides structural insights into by-products by resolving molecular environments, particularly useful for organic mixtures where proton or carbon signals distinguish minor species from the main product. Gas chromatography-mass spectrometry (GC-MS) complements this by separating volatile by-products and confirming their identity through fragmentation patterns, offering high sensitivity for trace-level detection in synthesis effluents. These methods together facilitate mechanistic studies, ensuring by-product formation is monitored without altering the reaction dynamics.

Optimization Strategies

Optimization strategies for chemical by-products focus on minimizing their formation, efficiently separating them from desired products, and repurposing them to enhance process efficiency and reduce waste. These approaches are integral to , emphasizing sustainable reaction design and resource utilization. Minimization strategies begin with principles, particularly , which quantifies the efficiency of a reaction by measuring the percentage of reactant atoms incorporated into the desired product. Developed by Barry M. Trost, is calculated as: % atom economy=(molecular weight of desired product∑molecular weights of all reactants)×100\% \text{ atom economy} = \left( \frac{\text{molecular weight of desired product}}{\sum \text{molecular weights of all reactants}} \right) \times 100 This metric guides chemists to select reactions that maximize atomic utilization and minimize by-product generation, such as avoiding multi-step syntheses with stoichiometric reagents that produce excess waste. Another key approach involves catalyst design to suppress side reactions, where selective catalysts enhance the yield of the target product while reducing unwanted by-products. For instance, heterogeneous catalysts with tailored active sites can direct reaction pathways toward desired outcomes, aligning with green chemistry's ninth principle of preferring catalytic over stoichiometric processes. Separation methods are employed to isolate by-products when minimization is incomplete, allowing for their recovery or disposal. Common techniques include , which exploits differences in boiling points to separate volatile by-products from reaction mixtures; solvent extraction, using immiscible to partition compounds based on solubility; and , which separates based on differential interactions with a stationary phase. In pharmaceutical synthesis, recrystallization serves as a targeted purification step, where the desired is dissolved in a hot and allowed to crystallize, leaving by-product impurities in solution or as filtrable residues, thereby achieving high purity levels essential for drug safety. Repurposing by-products transforms potential waste into valuable materials, closing loops in chemical processes. A prominent example is the conversion of , a by-product from (where vegetable oils react with to yield methyl esters and glycerol), into applications in as a and emollient. This valorization not only offsets production costs but also supports principles by utilizing the glycerol's high purity after simple purification. Key metrics for evaluating these strategies include yield optimization, which measures the ratio of desired product obtained to theoretical maximum, and the E-factor, introduced by Roger A. Sheldon to assess environmental impact. The E-factor is defined as: E-factor=total mass of waste (including by-products)mass of desired product\text{E-factor} = \frac{\text{total mass of waste (including by-products)}}{\text{mass of desired product}} Processes with low E-factors (ideally approaching zero for bulk chemicals) indicate superior sustainability, guiding iterative improvements in minimization and repurposing efforts.

Industrial and Environmental Contexts

Common Examples

In , , the fibrous residue left after extracting juice from during production, serves as a key by-product that is commonly utilized for generation through combustion in boilers to produce heat and , or processed into and building materials. In the food processing industry, emerges as a liquid by-product from the of proteins during cheese or manufacturing, which is subsequently dried and repurposed into high-value protein supplements due to its rich content of essential that support muscle health and metabolic functions. Similarly, wheat bran, obtained as the outer layer separated during the dry milling of into , is primarily directed toward formulations, providing and nutrients to enhance nutrition. Within the energy sector, carbon dioxide generated as a gaseous by-product during the microbial of sugars into is captured and applied in carbonating beverages like soft drinks or injected into oil fields for to improve extraction efficiency from mature reservoirs. In manufacturing, steel slag, a solid residue from the high-temperature smelting of iron ore and scrap in steel production, is ground and incorporated as a supplementary cementitious material in concrete mixtures, contributing to improved strength and durability while reducing the need for virgin aggregates. Additionally, plastic scraps arising from injection molding and extrusion processes in plastics manufacturing are collected and mechanically recycled into lower-grade products such as industrial pellets or composite materials, helping to close the loop in polymer production. A modern example from the emerging electric vehicle supply chains involves lithium compounds recovered as by-products during the hydrometallurgical of lithium-ion batteries from end-of-life , which are increasingly integrated into new battery production to address resource scarcity in the 2020s amid rapid growth.

Sustainability and Management

Industrial by-products, when discarded, contribute significantly to environmental , including the release of from effluents and the depletion of natural resources through inefficient material use. For instance, unmanaged contaminates air, water, and soil, leading to broader ecological damage and health risks. In the United States, more than 40 percent of stem from the production, transportation, use, and disposal of material goods, underscoring the role of by-products in exacerbating if not properly handled. Effective management of by-products emphasizes zero-waste initiatives and regulatory frameworks to minimize environmental harm. The European Union's , originally launched in 2015 and updated in 2020, promotes resource efficiency by encouraging the and of by-products across industries, aiming to reduce waste and foster a climate-neutral . In the United States, the Environmental Protection Agency's (RCRA), enacted in 1976, establishes cradle-to-grave controls for , including by-products, to protect human and the environment through strict , transportation, treatment, storage, and disposal standards. Integration of by-products into models transforms potential waste into valuable inputs, reducing dependency and resource extraction. A prominent example is the use of fly ash, a by-product from coal-fired power plants, as a supplementary cementitious material in production, which replaces portions of clinker and lowers overall emissions while enhancing material durability. Such practices align with broader circular principles, where industrial residues are repurposed to close material loops and diminish environmental footprints. As of , advancements in bio-based by-products from renewable feedstocks have gained traction, particularly in lowering carbon footprints through sustainable applications. Microalgal biomass residues, derived from biofuel production processes, serve as versatile by-products for further uses in bioplastics or fertilizers, leveraging the high yield and CO2-sequestering potential of to support greener industrial cycles. These developments, driven by innovations in cultivation and harvesting, position bio-based by-products as key contributors to transitions and reduced reliance on fossil resources.

References

  1. https://www.merriam-webster.com/dictionary/by-product
  2. https://dictionary.cambridge.org/us/dictionary/english/by-product
  3. https://www.accountingtools.com/articles/what-are-byproducts.html
  4. https://www.sfridoo.com/en/by-products/
  5. https://www.beefmagazine.com/market-news/variety-meat-exports-provide-value-to-the-u-s-beef-industry
  6. https://www.mdpi.com/2077-0472/13/8/1559
  7. https://foodsafety.institute/food-fundamentals-chemistry/maximizing-byproduct-utilization-food-processing/
  8. https://wastelesseu.com/the-crucial-role-of-by-product-valorization-in-circular-economy-and-industrial-symbiosis/
  9. https://www.sciencedirect.com/topics/agricultural-and-biological-sciences/industrial-byproducts
  10. https://www.doneproperly.co/en/news/food-industry-by-products-and-circular-economy/
  11. https://csimarket.com/glossary/term_By_Product.html
  12. https://docs.oracle.com/en/applications/jd-edwards/supply-chain-manufacturing/9.2/eoapm/understanding-co-products-and-by-products.html
  13. https://www.depts.ttu.edu/meatscience/history_of_the_meat_industry.pdf
  14. https://pmc.ncbi.nlm.nih.gov/articles/PMC3614052/
  15. https://www.ers.usda.gov/amber-waves/2008/april/whey-once-a-marginal-byproduct-comes-into-its-own
  16. https://www.hamptonlumber.com/the-science-of-sawdust-turning-waste-into-renewable-energy/
  17. https://knowledge4policy.ec.europa.eu/glossary-item/product_en
  18. https://www.sumup.com/en-gb/invoices/dictionary/by-products/
  19. https://viindoo.com/blog/business-management-3/byproducts-in-manufacturing-1765
  20. https://www.ecfr.gov/current/title-40/chapter-I/subchapter-I/part-261/subpart-A/section-261.1
  21. https://www.epa.gov/sites/default/files/2016-05/documents/5.3.16finaltrainingmodule7.pdf
  22. https://pubs.acs.org/doi/10.1021/op300317g
  23. https://www.linkedin.com/pulse/reporting-aisc-costs-by-product-v-co-product-sam-ulrich
  24. https://www.iso.org/standard/37456.html
  25. https://www.sciencedirect.com/science/article/pii/S0921344925000254
  26. https://www.eia.gov/energyexplained/gasoline/history-of-gasoline.php
  27. https://biotechnologyforbiofuels.biomedcentral.com/articles/10.1186/1754-6834-5-13
  28. https://www.accountingtools.com/articles/by-product-costing-and-joint-product-costing
  29. https://viewpoint.pwc.com/dt/gx/en/iasb/training_modules_for/Training_modules_for_IFRS_SME/training_modules_for_INT/module_13_inventorie_INT/requirements_and_exa__6_INT/joint_products_and_b__1_INT.html
  30. https://www.studocu.com/row/messages/question/6267927/a-explain-the-accounting-treatment-of-by-products-in-accordance-with-ias-2-inventories-3-b
  31. https://www.accountingtools.com/articles/joint-cost
  32. https://www.financestrategists.com/accounting/cost-accounting/by-products/
  33. https://www.netsuite.com/portal/resource/articles/accounting/net-realizable-value-nrv.shtml
  34. https://www.researchgate.net/publication/239830126_Corn_stover_for_bioenergy_production_Cost_estimates_and_farmer_supply_response
  35. https://www.ieabioenergy.com/wp-content/uploads/2013/10/IEA-Bioenergy-2007-Annual-Report.pdf
  36. https://www.mdpi.com/1996-1073/15/12/4480
  37. https://pubs.acs.org/doi/10.1021/acs.chemrev.2c00798
  38. https://pubs.acs.org/doi/10.1021/acsomega.8b01284
  39. https://pubs.acs.org/doi/10.1021/ed073p572
  40. https://pmc.ncbi.nlm.nih.gov/articles/PMC7461122/
  41. https://pubs.rsc.org/en/content/articlelanding/2007/gc/b713736m
  42. https://www.fao.org/4/s8850e/s8850e03.htm
  43. https://pmc.ncbi.nlm.nih.gov/articles/PMC8379461/
  44. https://agrilifetoday.tamu.edu/2024/09/17/from-cheese-byproduct-to-protein-supplement-how-whey-became-a-nutritional-ingredient/
  45. https://pmc.ncbi.nlm.nih.gov/articles/PMC8151190/
  46. https://www.feedipedia.org/node/726
  47. https://pubmed.ncbi.nlm.nih.gov/36728922/
  48. https://ethanolrfa.org/ethanol-101/ethanol-co-products
  49. https://www.c2es.org/document/enhanced-oil-recovery-agriculture/
  50. https://www.kgs.ku.edu/PRS/ICKan/2018/March/WhitePaper_EthanolCO2Capture_Dec2017_Final2.pdf
  51. https://doi.org/10.1016/j.conbuildmat.2021.122783
  52. https://pubs.usgs.gov/periodicals/mcs2021/mcs2021-iron-steel-slag.pdf
  53. https://plasticsrecycling.org/how-recycling-works/the-plastic-recycling-process/
  54. https://ecologycenter.org/plastics/ptf/report5/
  55. https://pubs.acs.org/doi/10.1021/acsenergylett.4c02198
  56. https://doi.org/10.1002/aenm.202501813
  57. https://www.epa.gov/smm/resources-waste-and-greenhouse-gas-emissions
  58. https://environment.ec.europa.eu/strategy/circular-economy_en
  59. https://www.epa.gov/rcra
  60. https://www.sciencedirect.com/science/article/pii/S266679082500045X
  61. https://www.sciencedirect.com/science/article/pii/S1385894725057286
Add your contribution
Related Hubs
User Avatar
No comments yet.