_(obverse).jpg/250px-NNC-US-1793-1C-Flowing_Hair_Cent_(chain)_(obverse).jpg){kind=small}
_(obverse).jpg/2000px-NNC-US-1793-1C-Flowing_Hair_Cent_(chain)_(obverse).jpg)
Community hub
0 subscribers8 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to Chain cent.
Nothing was collected or created yet.
Chain cent
View on Wikipediafrom Wikipedia
United states | |
| Value | 0.01 U.S. Dollar |
|---|---|
| Mass | 13.48 g |
| Diameter | 26–27 mm |
| Edge | Decorated with bars and vines |
| Composition | 100% Cu |
| Years of minting | 1793 |
| Mint marks | None, all large cents were minted at the Philadelphia Mint |
| Obverse | |
_(obverse).jpg) | |
| Design | Liberty (Breen obverse 3 shown) |
| Designer | Henry Voigt (supposedly) |
| Design date | 1793 |
| Reverse | |
_(reverse).jpg) | |
| Design | Chain (Breen reverse B shown) |
| Designer | Henry Voigt (supposedly) |
| Design date | 1793 |
The chain cent was America's first large cent and the first circulating coin officially produced by the United States Mint.[1] It was struck only during 1793.[2][3]
It was not the first circulating coin produced by the United States, which was the Fugio cent of 1787 (also known as the Franklin cent), based on the Continental dollar. As with the Fugio cent, the Chain cent was made of copper and featured a chain symbolizing the linking together of the states of the United States.
Obverse design
[edit]The obverse design consisted of a stylized Liberty head with flowing hair, similar to that on the 1792 half disme but facing right. The inscription "LIBERTY" appeared above the portrait, and the date below.
Reverse design
[edit]The reverse's central design figure, for which the coin is named, is an interlocking chain with 15 links, representing the fifteen American states in the Union at that time (the original Thirteen Colonies, Vermont and Kentucky). Both the words "ONE CENT" and the fraction 1/100 appear within the chain. Along the outer edge is inscribed "UNITED STATES OF AMERICA". On the first working die, the engraver failed to allow adequate room for the entire inscription, and it had to be abbreviated to "UNITED STATES OF AMERI.". These early dies were cut by hand, rather than being made from master hubs as is the practice today. (It is also said that the abbreviation was ordered by Mint Director David Rittenhouse in an attempt to "balance" the designs of the obverse and reverse).[4]
Edge
[edit]The edge of these coins is decorated with bars and vines with leaves.[5]
Public reaction
[edit]Chain cents were struck during late February and early March 1793; records indicate that approximately 36,103 were produced. However, the public reaction to the coins was largely unfavorable. One newspaper criticized the appearance of the Liberty head, saying that it appeared to be "in a fright". And, while the reverse chain had been intended to symbolize the unity of the newly formed Union (similar iconography had been utilized on the reverse of the earlier Fugio Cent and Revolutionary War era Continental currency), many commentators instead interpreted it as representative of slavery. By March, the Mint had run out of planchets, which temporarily halted striking. During this time, a new design – the Wreath cent – was quickly prepared and approved.[citation needed]
Collecting
[edit]As a one-year only type coin and the first business strike cent, the Chain cent has always been in demand, both by collectors of large cents, as well as type collectors.[6] Struck for about two weeks from late February until early March 1793, only about 1,000 coins are known to exist today, and even coins in the lowest grades still sell for thousands of dollars.[7]
References
[edit]- ^ The United States Mint Historian's Corner, The United States Mint
- ^ 1793 Chain Cents, Collectors Universe, Inc.
- ^ 1793 Chain Cent Varieties, Collectors Universe, Inc.
- ^ Julian, R. W. (October 12, 2021). "Mottos on United States Coinage". Numismatic News. Vol. 70, no. 26. Active Interest Media.
- ^ "Type 1, Chain Cent". pcgs.com. Collectors Universe, Inc. Retrieved 17 December 2023.
- ^ Thorne, Mike (January 2019). Collect All 17 U.S. Cent Types. Coins Magazine (Krause Publications).
- ^ Spurrier, Lianna. "CoinWeek IQ: A Breakdown of Flowing Hair Large Cents". CoinWeek.com. CoinWeek, LLC. Retrieved 16 January 2020.
External links
[edit]
- The First Cent Coinage
- Chain cent sold at auction
- One Cent 1793 Flowing Hair, Chain Reverse Detailed information, photos of varieties.
Chain cent
View on Grokipediafrom Grokipedia
The Chain cent is a copper one-cent coin struck by the United States Mint in Philadelphia in 1793, marking the first official federal coinage intended for circulation in the newly independent nation.[1][2] With a mintage of 36,103 pieces—the only year of production—this large cent weighs approximately 13.48 grams and measures 26 millimeters in diameter, featuring an edge inscribed with a wreath pattern.[2][1] The obverse depicts Liberty facing right with flowing hair, inscribed "LIBERTY" above and the date "1793" below, while the reverse shows a chain of thirteen links encircling "ONE CENT," with "UNITED STATES OF AMERICA" along the periphery, symbolizing the unity of the original thirteen states.[2][3] Attributed to chief coiner Henry Voigt, the design's abbreviated "AMERI." on early dies reflects the nascent Mint's experimental efforts under the Coinage Act of 1792, transitioning from pattern coins to everyday currency amid challenges like impure copper planchets and rudimentary machinery.[2][4] Highly sought by collectors due to its historical primacy and low survival rate, fine examples command substantial premiums, underscoring its role as the foundational piece in American numismatics.[5][6]
Valuations continue to rise for problem-free coins, though environmental damage or cleaning can depress prices significantly, as seen in adjusted sales for impaired pieces.[40] Collectors often consult population reports from PCGS and NGC to gauge availability, with fewer than 100 certified across all varieties in Mint State, emphasizing the premium for untouched, original surfaces.[20]
Historical Background
Authorization and Mint Establishment
The Coinage Act of April 2, 1792, signed into law by President George Washington, established the United States Mint as the nation's first federal facility for coin production and authorized the minting of gold, silver, and copper coins, including the cent denomination.[7] The legislation designated Philadelphia as the Mint's location, reflecting its status as the temporary national capital, and created essential positions including Director, Treasurer, Assayer, Chief Coiner, and Melter and Refiner to oversee operations.[7] These roles were designed to ensure accurate assaying, refining, and striking of coins under federal oversight, addressing the prior reliance on foreign and colonial coinage that had plagued the young republic's economy.[8] Section 9 of the Act specified the copper cent's composition, requiring each to contain 264 grains of pure copper or an alloy of equivalent quality for durability and circulation, with a proportional half cent at 132 grains.[9] This standardized the cent's weight and fineness, aiming to create a reliable small-denomination currency to facilitate everyday transactions in a decimal-based system where the dollar served as the unit of account.[10] The Act further empowered the Mint to procure necessary machinery and bullion, prohibiting private coin clipping or counterfeiting with severe penalties to protect the integrity of the new currency.[7] Following authorization, Mint construction commenced promptly; President Washington laid the cornerstone on July 31, 1792, marking the physical establishment of the facility on Cherry Street in Philadelphia.[11] David Rittenhouse was appointed the first Director in September 1792, initiating assays and preparations for coinage amid logistical challenges like equipment importation from England.[8] Although patterns and impressions were tested in late 1792 using silver donated by Washington, full-scale copper cent production began in early 1793, with the chain cent design selected as the inaugural circulating issue to symbolize federal unity through its reverse motif of interlinked states.[12] This rapid transition from legislative authorization to operational minting underscored Congress's urgency to supplant depreciated state-issued money and foreign coppers with a uniform national standard.[1]Early Coinage Challenges
The United States Mint, newly established in Philadelphia, faced significant material shortages during the production of the 1793 Chain cent, exacerbated by the French Revolutionary Wars disrupting European copper exports. Rising global copper prices and limited domestic supplies prompted Director David Rittenhouse to import sheet copper from Great Britain, while Congress authorized a weight reduction for the cent from 264 grains to 208 grains to mitigate costs.[1] These constraints contributed to inconsistent planchet quality, with many coins exhibiting cracks, flaws, and surface defects due to the Mint's rudimentary refining processes.[6] Engraving the dies presented further difficulties, as no professional engraver was available; instead, Mint Superintendent Henry Voigt, a watchmaker lacking formal training in die-cutting, hand-engraved the obverse Liberty head and reverse chain design in February 1793.[1] This inexperience resulted in die varieties, such as "AMERI." versus "AMERICA." on the reverse, and rapid die wear, evidenced by breaks and weak strikes common in surviving examples.[13] The Mint's primitive machinery, including unreliable rollers for producing planchets and presses prone to misalignment, compounded these issues, leading to uneven striking and frequent production halts.[14] Overall, these technical and logistical hurdles limited output to just 36,103 Chain cents, struck between February 27 and March 12, 1793, before the design was abandoned amid both production inefficiencies and public backlash.[15] The resulting coins often display prominent imperfections, such as planchet striations and die cracks, reflecting the early Mint's operational limitations despite its ambition to establish a national coinage standard.[16]Production Details
Minting Process
The dies for the chain cent were manually engraved by Chief Coiner Henry Voigt at the Philadelphia Mint, as no dedicated engraver was yet employed; Voigt's prior experience as a watchmaker resulted in rudimentary execution visible in the coin's crude lettering and details.[1][17] The obverse die featured Liberty's flowing hair and the word "LIBERTY," while the reverse depicted a 15-link chain encircling "ONE CENT," with upper and lower dies aligned in screw presses for striking.[18] Copper planchets were prepared from imported raw metal or pre-cut blanks, flattened into strips via horse- and man-powered rollers, then punched into circular blanks using cutting presses at the Mint's facility on Seventh and Filbert Streets.[19] These blanks, weighing approximately 13.48 grams and measuring 27-28 mm in diameter post-striking, were often irregularly shaped due to early production limitations and foreign sourcing inconsistencies.[20] Striking occurred on hand-operated screw presses—either lever or wheel types—requiring one to three workers to apply force, achieving low-relief impressions at a rate of roughly 24 coins per minute; this process began in late February 1793 and lasted until early March, yielding the first federal circulating cents delivered on March 1.[19][18][2] The machinery, adapted from 18th-century European designs, produced uneven strikes and frequent die clashes, reflecting the Mint's nascent operational challenges.[19][3]Mintage and Varieties
The Chain cent, a Flowing Hair large cent subtype, was struck exclusively in 1793 at the Philadelphia Mint with a total mintage of 36,103 coins produced from February 27 to March 12.[20] [21] This brief production run reflected the experimental nature of early U.S. Mint operations and the rapid shift to alternative reverse designs amid public criticism.[20] Coinage utilized four obverse dies paired with three reverse dies, attributable to the inferior quality of available die steel, resulting in multiple die varieties.[3] Varieties are cataloged under the Sheldon (S-) system, comprising S-1 through S-4, with an occasional NC-1 attribution for certain AMERICA reverse pairings.[2] [20] The S-1 variety features an abbreviated "AMERI." in the reverse legend, while S-2, NC-1, S-3, and S-4 employ the full "AMERICA," distinguished by die markers such as leaf positions relative to date numerals and chain link details.[20] [22] Precise mintage figures per variety remain undocumented, as the Mint did not track die-specific outputs, though numismatist Walter Breen estimated approximately 6,350 pieces for the scarcer S-1.[23] All varieties share a composition of pure copper, a diameter of approximately 26.5 to 29 millimeters, and a lettered edge inscribed "UNITED STATES OF AMERICA," though edge varieties are not differentiated in standard classifications.[24] The low overall production and historical hoarding contribute to the relative rarity of surviving examples across grades.[21]Physical Design
Obverse Features
The obverse of the 1793 Chain cent features a right-facing profile portrait of Liberty with loose, flowing hair cascading down her neck, which inspired the "Flowing Hair" designation for this series.[5] The inscription "LIBERTY" arches above the figure's head, while the date "1793" appears below the truncated neckline.[2] No stars or other peripheral elements adorn the obverse, emphasizing the central bust in a simple, uncluttered composition.[25] This design is attributed to Henry Voigt, the United States Mint's Chief Coiner, who reportedly both designed and engraved the dies, though the artistic originator remains unidentified in some accounts.[15] The portrait's execution is described as crude by contemporary and modern numismatists, with Liberty's features appearing stern or startled, attributed to the Mint's nascent die-making capabilities and Voigt's limited artistic training.[3] Four distinct obverse dies were used across the Chain cent varieties, differentiated by date spacing (wide or narrow) and subtle letter positioning, but all share the core portrait and inscription layout.[21] The obverse's aesthetic drew early criticism for its unrefined quality rather than symbolic content, with observers noting the hair's disheveled appearance and the figure's unconventional, windswept pose as departures from classical numismatic ideals.[5] Despite these flaws, the design marked the first official depiction of Liberty on a circulating U.S. coin, reflecting the young republic's emphasis on republican symbolism over polished artistry.[26]Reverse Features
The reverse of the 1793 Chain cent features a circular chain composed of fifteen interlocking links encircling the denomination "ONE CENT" positioned centrally.[5][2] The chain design, attributed to Chief Coiner Henry Voigt, symbolizes the unity of the fifteen states comprising the United States by 1793, following the addition of Vermont in 1791 and Kentucky in 1792 to the original thirteen.[27][5] Encircling the chain is the legend "UNITED STATES OF AMERICA," with two primary varieties distinguished by the truncation of the final word: one abbreviating it to "AMERI." and the other spelling it fully as "AMERICA."[21][28] These variations arise from different reverse dies used in production, with the "AMERI." type paired across multiple obverse dies.[29] The chain motif drew contemporary criticism for evoking associations with bondage or slavery, despite its intended representation of interconnected state unity, prompting its replacement by a wreath design later in 1793.[5] Numismatic analyses confirm the chain's fifteen links align with the era's state count, countering occasional misattributions to thirteen links tied solely to the founding colonies.[2][29]Edge Characteristics
The edges of the 1793 Chain cent bear a vine and bars design, consisting of incuse impressions where segments of laurel vine—complete with leaves and berries—alternate with groups of three to five vertical bars around the coin's circumference.[26][20] This edge device was applied after striking via a specialized collar mechanism, serving as an anti-counterfeiting measure to inhibit clipping or shaving of the copper planchet, which weighed 13.48 grams and measured approximately 27 millimeters in diameter.[20] The pattern closely resembled that employed on contemporaneous half cents, indicating the Philadelphia Mint's initial reliance on decorative rather than inscribed edges for large-denomination coppers amid production challenges in 1793.[26] All known examples of the Chain cent variety exhibit this uniform edge type, with no recorded deviations or lettered alternatives in the mintage of 36,103 pieces.[20][2]Public Reception
Initial Circulation
![1793 Chain Cent obverse and reverse][float-right] The 1793 Chain Cent marked the inaugural release of United States federal coinage intended for everyday commerce, with the first batch of 11,178 pieces delivered by the Philadelphia Mint to the Treasurer on March 1, 1793.[10] These copper large cents, weighing approximately 264 grains and measuring 28-29 millimeters in diameter, were struck from planchets imported from England and sourced domestically, representing the Mint's initial effort to standardize national currency under the Coinage Act of 1792.[30] Distribution occurred through the Treasurer's office and local banks, facilitating entry into circulation amid a economy still reliant on foreign coins and barter.[31] Production totaled 36,103 Chain Cents, minted between February 27 and March 12, 1793, in multiple small deliveries to ensure quality control during the Mint's nascent operations.[20] [27] As the denomination's value equated to one-hundredth of a dollar, these coins addressed the need for small change in transactions, though their large size—comparable to a modern half-dollar—drew early complaints about practicality.[10] Initial public uptake was modest, with the coins circulating primarily in urban areas like Philadelphia, but their brief tenure limited widespread adoption before the design shift to the Wreath Cent in April.[3] Early circulation records indicate no major logistical hurdles in distribution, but the Mint's limited output reflected ongoing challenges in securing consistent copper supplies and refining striking techniques.[30] Numismatists note that surviving examples show varied wear patterns consistent with short-term use in commerce, underscoring the type's role as a transitional coinage bridging colonial practices and standardized federal money.[23]Design Criticisms and Symbolism Debates
The reverse design of the 1793 Chain Cent featured a circular chain composed of 15 links, intended by Mint officials to symbolize the strength and unity of the 15 states comprising the United States at the time, including the original 13 colonies plus Vermont and Kentucky.[10][3] However, this motif sparked immediate public backlash, with many interpreting the chain as evoking slavery or captivity, a particularly sensitive association in the aftermath of the American Revolution and amid ongoing debates over bondage in the early republic.[10][22] Critics argued that depicting chains on the first official circulating coin of a free nation conveyed an ironic and ominous message, undermining the ideals of liberty; one contemporary newspaper account labeled the chain an "ill omen for Liberty," highlighting its perceived incompatibility with republican symbolism.[30] This symbolism debate reflected broader tensions over national iconography, where the intended emphasis on interconnected states clashed with visceral associations of restraint, prompting swift design changes by April 1793 to a neutral wreath motif.[32] Aesthetic critiques compounded the symbolism concerns, targeting both sides of the coin for technical and artistic shortcomings. The obverse Liberty figure, adapted from earlier patterns, was derided for its "wild" and unrefined appearance, with flowing hair and facial features that struck observers as crude or witch-like rather than classically dignified.[32][33] The reverse chain suffered similar scorn for its simplistic execution and lack of elegance, failing to convey grandeur despite the Mint's limited engraving capabilities under Director David Rittenhouse and engraver Henry Voigt.[2] These evaluations, voiced in period newspapers and later numismatic analyses, underscored the nascent U.S. Mint's struggles with die preparation and artistic precedents, as the Chain Cent's hurried production prioritized functionality over refinement.[29] Overall, the dual layers of symbolic misinterpretation and design flaws fueled unfavorable reception, hastening the type's obsolescence after a mintage of approximately 36,103 pieces.[23]Numismatic Legacy
Rarity and Survival Rates
The 1793 Chain Cent had a reported mintage of 36,103 coins, struck across multiple die varieties during the United States Mint's inaugural year of production.[3] Survival estimates place the number of extant examples between 1,000 and 2,000, representing a low preservation rate attributable to heavy circulation, poor striking quality, and the era's limited numismatic preservation practices.[3] [34] Most survivors grade VF or lower, often showing environmental damage, planchet flaws, or post-mint impairments such as cleaning or graffiti, which further diminishes the pool of desirable specimens.[15] Rarity varies significantly by die state and variety. For instance, the Sheldon-1 (AMERI.) variety has a PCGS survival estimate of around 200-300 coins, with numismatic rarity rated R-6, while the Periods variety (Sheldon-4) estimates fewer than 100 survivors in higher grades, achieving R-7 rarity.[35] [36] Uncirculated examples are exceptionally scarce, with only about 10-15 known across all varieties, many preserved as contemporary saves rather than through careful handling.[25] Population reports from major grading services indicate fewer than 100 Chain Cents certified in Mint State by PCGS and NGC combined as of recent data, underscoring their status as key dates in early American numismatics.[36]Collecting and Market Valuation
The 1793 Chain Cent attracts significant interest from numismatists specializing in early United States copper coins, valued for its status as the first circulating federal cent and symbolic representation of the union of states through the reverse chain motif.[26] Collectors pursue it as a key type coin in series encompassing Flowing Hair large cents, often prioritizing die varieties classified under the Sheldon system.[3] Approximately 1,500 to 2,000 examples are estimated to survive from an original mintage exceeding 36,000, with the majority in impaired or low grades such as Good to Fine, rendering higher-grade specimens particularly desirable.[3][23] Six primary die varieties exist, denoted S-1 through S-6, differentiated by obverse bust details, reverse lettering (e.g., "AMERI." in S-1 versus full "AMERICA"), and presence of periods between words.[32] The S-1 variety, featuring the abbreviated "AMERI." due to die spacing constraints, ranks among the rarest with a Sheldon rarity rating of R-4, while S-3 (AMERICA without periods) is rated R-3 and more attainable for collectors.[32] Condition, strike quality, and surface preservation heavily influence desirability; pieces grading Extremely Fine or better remain elusive, with Mint State survivors numbering fewer than a dozen across varieties.[26] Provenance from notable cabinets, such as those of early collectors like Joseph J. Mickley or modern consignments via major auction houses, can command premiums.[37] Market valuation reflects the coin's scarcity and condition sensitivity, with certified examples from Professional Coin Grading Service (PCGS) or Numismatic Guaranty Corporation (NGC) dominating transactions. In lower circulated grades (e.g., Very Good to Fine), prices typically range from $8,000 to $50,000 depending on variety and eye appeal, as evidenced by a Fine-15 "AMERICA" example realizing $21,150 at Heritage Auctions in 2012.[38] Higher grades escalate dramatically; a PCGS MS-64 Brown S-3 sold for $207,000 at Stack's in 2008, while an exceptional MS-65 or better can exceed $1 million, with one Chain Cent achieving $2,350,000 at Heritage in 2014 amid competition from elite collections.[37] Recent sales underscore sustained demand, including an S-1 "AMERI." in PCGS AU-50 fetching $108,000 at the 2025 American Numismatic Association auction reported by NumisMedia, reflecting appreciation driven by limited supply and institutional interest.[39]| Variety | Grade Example | Recent Sale Price | Auction House/Date |
|---|---|---|---|
| S-1 (AMERI.) | AU-50 PCGS | $108,000 | ANA 2025[39] |
| S-2 (AMERICA) | Fine-15 NGC | $21,150 | Heritage 2012[38] |
| S-3 (AMERICA) | MS-64 BN PCGS | $207,000 | Stack's 2008 |