Hubbry Logo
General Motors B platformGeneral Motors B platformMain
Open search
General Motors B platform
Community hub
General Motors B platform
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
General Motors B platform
General Motors B platform
General Motors B platform
View on Wikipedia
from Wikipedia
GM B Platform
1973 Oldsmobile Delta 88 convertible
Overview
ManufacturerGeneral Motors
Buick
Pontiac
Chevrolet
Oldsmobile
Cadillac
Production1926–1996
Body and chassis
ClassFull-size car
LayoutFR layout
Chronology
SuccessorGM H platform (FWD) (full-size)
GM G platform (1995) (full-size)
GM W platform (full-size)
GM V platform (RWD) (for Chevrolet Caprice sold in the Middle East)
GM Zeta Platform (for Chevrolet Caprice sold in both the Middle East & North America and Chevrolet SS for the RWD Impala SS)

The B platform (also known as the B body) is a full-size, rear-wheel drive, body-on-frame car platform, that was produced by General Motors (GM) from 1926 to 1996. Originally made for Oldsmobile and Buick, all of General Motors's five main passenger car makes would use it at some point. It was closely related to the original rear-wheel drive C and D platforms, and was used for convertibles, hardtops, coupes, sedans, and station wagons. With approximately 12,960,000 units built, divided across four marques, the 1965–1970 B platform is the fourth best selling automobile platform in history after the Volkswagen Beetle, Ford Model T, and the Fiat 124 (and its licence-built copies, mainly classic Ladas).[1]

Originally, the B platform was used for Buick and Oldsmobile products, with the A platform for Chevrolet and Oakland, and the C and D platforms devoted to Cadillac. During the General Motors companion make program, Vikings and Marquettes were also manufactured on this platform, as were La Salles from 1936 to 1940. The B platform became GM's base model platform in 1958, when all existing Chevrolet products were upgraded to the B platform.

The B platform was used for the Pontiac Streamliner Torpedo and Streamliner; the Oldsmobile L-Series, Series 70, and Series 88; the Buick Special and Century; the LaSalle Series 50; and the Cadillac Series 60, Series 61, and Series 63.

For the 1959 model year, the previous A- and B-bodies were built on the new B platform[2][3] that lasted until 1996. During this period, the B was the most modest of GM's three full-sized platforms, slotting below the upscale C and the luxury D. The A platform designation would be resurrected by GM in 1964 for a new series of intermediate-sized cars including the Chevrolet Chevelle, Pontiac Tempest, Oldsmobile Cutlass, and Buick Skylark.

History

[edit]

The GM B platform was introduced in 1926 with the Buick Master Six, and the Oldsmobile Model 30, and had at least 12 major re-engineering and restyling efforts, for the 1937, 1939, 1941, 1949, 1954, 1957, 1959, 1961, 1965, 1971, 1977, and 1991 model years; along with interim styling changes for 1942, 1969, and 1980 that included new sheetmetal and revised rooflines. The platform was downsized in length by approximately 10 inches in 1977 and reduced in weight by an average of 800 pounds.

In 1991, the platform received its last major redesign, regaining several inches in length and featuring numerous frame improvements and reinforcements, while the shorter wheelbase remained unchanged. The last B-cars rolled off the line in 1996, leaving only Ford producing domestic large rear-wheel-drive sedans until the line was phased out in late 2011, with Chrysler reentering the market with their LX platform in 2005.

1996 Buick Roadmaster Estate Wagon

Known for being durable and reliable, most B-platform cars used suspensions utilizing coil springs in the front and leaf springs in the rear until 1958, when they switched to coils in the rear; one exception is the 1959–60 Oldsmobile 88, which used coil springs in front and multi-leaf springs in the rear. All B-platform cars since 1965 used perimeter frames with side rails, along with the 1961–64 B-platform Pontiacs and Oldsmobiles. The 1958–60 Buicks and 1959–60 Oldsmobiles used a ladder-type frame, while an X-frame without side rails was used on 1959–60 Pontiacs, 1959–64 Chevrolets, and 1961–64 Buicks.

The B platform was the last platform design to have the gasoline tank filler port behind the license plate after 1958. Exceptions included all station wagons, as well as all 1961–64 cars (which had the tank filler in the rear fender on the driver's side) and 1965 Buicks (which had their fuel filler door above the license plate). Also, the B-platform vehicles from Pontiac, Oldsmobile, and Buick from 1941 to 1948 had the fuel filler door in the rear fender on the driver's side.


By 1986, the Buick LeSabre and Oldsmobile Delta 88 moved to the GM H platform. And in 1991, Chairman Robert Stempel said:[4]

There are some corporate things we're going to drive; we are a front-drive corporation.

He also stated that the rear-wheel-drive 1992 Buick Roadmaster and Chevrolet Caprice had been produced "over my dead body."[4] No direct successor for this platform was made after 1996, when the Roadmaster and Caprice ceased production. However, the Caprice would be revived and built on the Opel-developed V platform for the Middle East but built by Holden, while years later, the Caprice for police use along with the Impala SS successor, the Chevrolet SS, would return to the United States, built on the GM Zeta platform developed by Holden in Australia.

Use

[edit]

Sedans

[edit]

Chevrolet

Pontiac

Oldsmobile

Buick

Cadillac

Two-door only

[edit]

Station wagons

[edit]

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

General Motors B platform

View on Grokipedia
from Grokipedia
The General Motors B platform, also known as the B-body, was a full-size, rear-wheel-drive, automobile platform produced by the company from 1926 to 1996, underpinning a wide array of sedans, coupes, and wagons across its various brands. Over its seven-decade lifespan, the platform underwent 12 major re-engineering efforts to adapt to changing market demands, technological advancements, and regulatory pressures, evolving from early large luxury vehicles to more efficient designs in response to events like the . Key milestones included the 1958 shift to a four-wheel coil-spring suspension for improved ride quality and handling, which became a hallmark of mid-century B-body vehicles, and the 1977 downsizing initiative that reduced overall length by about 10 inches and weight by around 800 pounds, enhancing fuel economy by up to 30% while maintaining spacious interiors. Notable models built on the B platform encompassed the and Caprice, and LeSabre, , and , with production peaking at 12.96 million units between 1965 and 1970, making it one of GM's most prolific and versatile designs. By the 1990s, updates like the 1991 redesign introduced a longer , refined with flush headlights, and overdrive transmissions, but the platform was phased out in 1996 as GM transitioned to front-wheel-drive architectures for its full-size sedans.

History

Origins and Prewar Development (1926–1948)

The General Motors B platform emerged in 1926 as a pioneering effort in corporate platform sharing, designed to enhance cost efficiency and production scalability across GM's divisions by standardizing a full-size rear-wheel-drive for multiple brands. It debuted with the Master Six (Series 40), which featured a 274-cubic-inch inline-six engine producing 75 horsepower, and the Model 30, equipped with a 169-cubic-inch inline-six delivering 41 horsepower; both models shared key structural elements to reduce development and manufacturing redundancies, with the on a 120-inch and the on a 115-inch . This approach aligned with GM president Alfred P. Sloan's strategy of offering a " for every purse and purpose," allowing divisions like and to differentiate through styling and features while leveraging common components. The platform's foundational engineering emphasized durability and simplicity, utilizing a construction with a ladder-type , live rear suspended by semi-elliptical springs, and a similar setup for the front with transverse springs and radius rods for stability. Power was delivered through divisional inline-six engines adapted for the shared architecture, paired with four-wheel mechanical drum brakes and a three-speed . By 1936, a significant redesign introduced an X-type frame with double drops for enhanced torsional rigidity and lower , as seen in the Series 40 Special, which improved handling and allowed for more streamlined body designs amid evolving aesthetic trends. This update extended to Oldsmobile's Series 60 and 70 models, solidifying the B platform's role in GM's lineup of full-size sedans and coupes. During the late 1930s, the platform supported GM's recovery from the , with production ramping up as economic conditions improved; cumulative output across , , and emerging Chevrolet applications exceeded 1 million units by 1940, contributing to GM's market leadership with over 50% U.S. share in 1937. For instance, alone produced around 65,000 Master Six models in 1925, rising to over 100,000 by 1928, while 's Model 30 reached 48,000 units in 1926. The onset of in 1941 prompted adaptations, including "blackout" models for 1942 civilian production with painted grilles and minimal chrome to conserve materials, before full conversion to military output; simplified designs using substitute materials like and steel reallocations enabled limited postwar resumption in 1946 using the 1941-1942 chassis through 1948. These wartime measures ensured the platform's continuity, paving the way for postwar innovations in suspension design.

Postwar Expansion and Redesigns (1949–1976)

Following the end of , the General Motors B platform experienced rapid expansion as demand for automobiles surged , with major styling updates emphasizing aerodynamic and futuristic aesthetics from 1949 to 1958. These years saw the introduction of wraparound windshields on models like the 1954 , enhancing visibility and modern appeal, while tailfins became a signature feature starting with the 1948 and proliferating across divisions by 1949, symbolizing jet-age design influences on full-size sedans and coupes. By 1955, select B platform vehicles, including the Chevrolet series, adopted front coil-spring suspension for a smoother ride quality compared to traditional leaf springs, marking an early engineering shift toward improved comfort in the postwar luxury market. The 1959 model year brought a comprehensive redesign of the B platform, featuring wider bodies up to 80 inches across divisions like Chevrolet and Pontiac to accommodate growing families and provide more interior space. This update evolved the chassis from earlier ladder frames toward an X-frame design on Chevrolet models, which crossed at the center for better and rigidity, though it later faced for side-impact ; other divisions like incorporated perimeter frames with reinforced side rails for enhanced protection. Integrated into this redesign was the widespread adoption of GM's first big-block V8 engines, notably the Chevrolet 348 cu in (5.7 L) Turbo-Thrust, offering up to 315 horsepower and positioning the platform as a performance leader in the full-size segment. A major engineering overhaul arrived in 1965, introducing an all-coil suspension system across the B platform's full-size lineup, with independent front coils and rear four-link coil setup on a perimeter frame, positioning the steering box forward of the axles for reduced and a more car-like handling feel. This innovation, first seen on and Caprice models, improved ride isolation and stability, contributing to the platform's reputation for refined highway during the era's interstate expansion. By 1971, styling shifted to colonnade-inspired designs with formal rooflines on sedans, featuring framed doors and integrated B-pillars for structural integrity and a pillarless appearance, aligning with federal standards while maintaining the platform's flagship status. Production and sales of B platform vehicles peaked in the , exceeding 2 million units annually across Chevrolet, Pontiac, , and divisions, driven by suburban growth and economic prosperity; for instance, ' total U.S. vehicle output reached 5.35 million in 1965 alone, with full-size B-body models comprising the majority. Adaptations for luxury divisions extended the platform's versatility, as seen in Series 60 Special, which utilized a stretched 133-inch version of the B from 1949 onward, incorporating trim, power features, and V8 powertrains to cater to high-end buyers seeking extended limousine-like sedans.

Downsizing and Final Years (1977–1996)

In response to the 1970s energy crises and the introduction of (CAFE) standards, significantly downsized the B platform for the 1977 model year, reducing wagon lengths by 14 inches (360 mm) and sedan/coupe lengths by about 10 inches (250 mm) while achieving weight savings of approximately 600 lb (270 kg) for sedans and up to 870 lb (395 kg) for wagons to enhance . This redesign maintained interior space through efficient packaging, with the updated perimeter frame providing structural integrity and the front suspension featuring independent coil springs for improved ride quality. Throughout the 1980s, the platform underwent refinements to meet evolving emissions and efficiency regulations, including the adoption of computer-controlled carburetors (such as GM's Computer Command Control system introduced in 1980) for better fuel management and the transition to throttle body fuel injection on V8 engines by 1987, which improved drivability and compliance with CAFE targets. These updates, combined with reinforced frames to satisfy federal crash safety standards like FMVSS 208, helped the B platform adapt to stricter regulatory demands amid declining demand for large rear-wheel-drive vehicles. By 1990, annual production across GM's full-size B- and C-body lines had fallen below 200,000 units, reflecting a shift toward smaller, more efficient cars. The 1991 model year delivered the platform's final major facelift, featuring composite headlights, rounded aerodynamic bodywork, and subtle styling tweaks on models like the to reduce drag and boost highway fuel economy without altering the core architecture. Production of the B platform concluded in 1996, as phased it out in favor of front-wheel-drive platforms like the H-body for remaining full-size sedans, ending a 70-year run of rear-wheel-drive design. Its enduring legacy persists in the aftermarket, where the platform's robust V8 compatibility and modular make it a staple for hot-rodding and custom builds.

Design and Engineering

Chassis and Body-on-Frame Construction

The General Motors B platform utilized a rear-wheel-drive, architecture as its foundational design, enabling modular body styles and shared components across Chevrolet, , , Pontiac, and divisions from 1926 to 1996. This layout separated the structural from the body shell, facilitating easier assembly, repairs, and adaptations for various vehicle lengths. Wheelbases typically spanned 115 to 121 inches (2,920 to 3,070 mm) for sedans and coupes across most generations, with variants extended to approximately 129 inches to accommodate cargo space while preserving ride characteristics. The incorporated high-strength in frames and crossmembers to enhance durability and load-bearing capacity, particularly in later iterations where material advancements supported downsizing efforts without compromising safety. Early B platform frames from 1926 to 1956 employed conventional open-channel ladder designs, providing straightforward torsional rigidity through parallel rails and crossmembers, as seen in the 1926 Master Six with its robust sealed chassis. In 1957, GM pioneered the X-frame configuration—a central backbone reinforced by X-shaped side members—for superior stiffness, which was applied to B platform full-size cars from to 1964, including Chevrolet Impalas and Pontiac Bonnevilles. This evolution prioritized lower ride heights and better handling by integrating deeper floor pans, while maintaining high torsional resistance essential for convertibles and long-wheelbase models. Track widths generally measured 60 to 62 inches (1,524 to 1,575 mm) front and rear, contributing to stable road manners, with ground clearance held at 5 to 6 inches (127 to 152 mm) for balanced urban and highway performance. Beginning in , the platform shifted to a perimeter frame that extended side rails outward to encircle the passenger compartment, replacing the X-frame and offering enhanced side-impact protection by positioning structural elements beneath the rocker panels. This design persisted through 1976, promoting uniformity across GM's full-size lineup and improving occupant safety in lateral collisions. For the 1977 redesign, the perimeter frame incorporated boxed rail sections and thinner-gauge high-strength steel, achieving weight reductions of up to 400 pounds per vehicle while preserving rigidity; this facilitated the platform's downsizing amid demands. Bodies were fabricated from stamped mild steel panels assembled via resistance spot-welding for precise joints and cost efficiency. By the , select B platform models, such as the , integrated galvanized steel in key exterior panels to bolster resistance, addressing earlier vulnerabilities in salt-belt regions.

Suspension, Drivetrain, and Powertrains

The General Motors B platform employed a variety of suspension configurations over its seven-decade lifespan, evolving to balance ride comfort, handling, and durability in full-size vehicles. From 1926 to 1954, the rear suspension utilized multi-leaf springs paired with a live , providing robust load-carrying capability for early sedans and coupes like the and Standard Six, while the front featured coil springs with independent control arms for basic steering geometry. By 1958, GM transitioned to a full four-wheel coil-spring setup across B-platform models such as the and , incorporating upper and lower control arms at both ends along with optional sway bars to enhance ride quality and reduce body roll during cornering. This coil-spring design, refined in 1965 with perimeter-frame integration and a four-link rear suspension, marked a significant upgrade in handling for vehicles like the 1965-1970 , allowing for smoother highway performance and better weight distribution under load. The 1977 downsizing of the B platform further advanced suspension engineering, adopting a shorter 116-inch derived from the A-body while retaining four-wheel coil springs with reinforced control arms and improved shock absorbers, which improved roadholding by approximately 30% over prior full-size iterations and contributed to sharper response in models like the . Optional F-41 sport suspension packages, available from 1977 through 1996, added stiffer springs, larger sway bars, and performance-tuned shocks to further minimize understeer and enhance cornering stability. Overall, these evolutions prioritized a plush yet controlled ride suited to family sedans and wagons, with heavy-duty variants incorporating upgraded bushings and springs for towing applications. Drivetrain components on the B platform emphasized rear-wheel-drive layout with hypoid gear differentials for efficient power transfer and reduced noise. The standard rear was a hypoid design, evolving to include the robust 8.5-inch 10-bolt ring gear unit from 1971 onward, as seen in and models, which supported gear ratios from 2.73:1 to 3.42:1 for a balance of acceleration and highway cruising. Optional Positraction limited-slip differentials, introduced by Chevrolet in 1957 and widely available across GM divisions, used clutch packs to distribute torque evenly between rear wheels during low-traction conditions, improving launch traction in performance-oriented variants like the 1965 2+2. Column-mounted three-speed manual shifters were initial fare, but automatics dominated by the ; the 400 (TH400), a heavy-duty three-speed unit introduced in , became the go-to pairing for V8-equipped B-bodies through the 1970s, offering smooth shifts and towing durability up to 7,000 pounds with heavy-duty cooling options. Later models from 1982 adopted the overdrive-equipped TH200-4R and, by the early 1990s, the 4L60 four-speed automatic, enhancing fuel efficiency in downsized platforms like the 1991-1996 . Powertrain development on the B platform reflected GM's shift from economy-focused inline-sixes to high-output V8s, adapting to performance demands and emissions regulations. Early applications from 1926 featured inline-six engines like the 207-cubic-inch (3.4 L) unit in the Master Six, delivering modest 60-80 horsepower for basic transportation. The 1950s marked the arrival of small-block V8s, with the 283-cubic-inch (4.6 L) Chevrolet Turbo-Fire introduced in 1957 as an option across divisions, producing 185-283 horsepower depending on carburetion and boosting straight-line speed in models like the 1958 . By the 1970s, big-block power peaked with the 454-cubic-inch (7.4 L) LS5 V8 in SS variants from 1970-1976, rated at up to 360 horsepower in 1970. Post-1977 downsizing emphasized efficiency, pairing smaller V8s with electronic fuel management; the 305-cubic-inch (5.0 L) Chevrolet V8, fitted with throttle-body injection (TBI) starting in 1987, became standard in B-body sedans like the , delivering 170-190 horsepower and 16-22 mpg highway economy while maintaining compatibility with the TH700-R4 transmission. Representative V8 models across eras achieved 0-60 mph acceleration in 8-12 seconds, with later LT1-equipped 1994-1996 SS variants improving to 7.4 seconds due to tuned port injection and lighter curb weights around 4,000 pounds. Heavy-duty towing packages, including auxiliary transmissions coolers and 3.42:1 rear gears, supported capacities up to 7,000 pounds (3,200 kg) in wagons like the 1991-1996 Estate, underscoring the platform's versatility for utility roles.

Applications

Sedans and Hardtops

The General Motors B platform served as the foundation for a wide array of full-size sedans and hardtops across its divisions, positioning these vehicles as versatile family haulers and fleet staples from the late through the mid-1990s. Primary models included the from 1965 to 1996 and Bel Air from 1965 to 1980 as flagship offerings, the from 1959 to 1990, the from 1949 to 1996, the from 1958 to 1986, and the Cadillac Fleetwood Brougham from 1977 to 1992 and from 1993 to 1996 (on B/D platform), all leveraging the platform's construction for durability and adaptability. These sedans emphasized spacious interiors and smooth rides, appealing to middle-class families seeking affordable luxury in the American market. Body configurations for B platform sedans typically featured four-door designs, with pillarless variants popular in the and 1970s for their sleek, open-air appearance without center pillars, as seen in models like the 1965-1969 and four-door hardtops. Post-1971 redesigns introduced more formal rooflines with upright C-pillars and taller rear decks, enhancing the stately presence of upscale trims such as the Caprice Classic, often accented by optional vinyl roofs for added elegance. The shared dimensions across divisions allowed for consistent wheelbases—typically 116 to 121 inches—facilitating interchangeable components while permitting brand-specific styling cues. These vehicles dominated the U.S. full-size sedan market, with Chevrolet models alone accounting for over 600,000 units sold in , including approximately 613,000 Impalas (encompassing Bel Air) and 92,000 Caprices, reflecting peak demand before the . Their popularity extended to fleet applications, particularly police duties, where the Chevrolet Caprice's robust frame and V8 power made it a staple; the dedicated 9C1 police package debuted in , featuring heavy-duty suspensions and high-output engines for pursuit roles. services also favored the platform for its reliability and capacity, contributing to millions of units produced across the 1970s and 1980s. Unique features distinguished upscale divisions, with power windows and seats becoming standard on models like the and by the mid-1960s, enhancing comfort for long-distance travel. In the final years, the 1991-1996 offered an optional LT1 5.7-liter producing 260 horsepower, providing high-performance capability in sedan form while maintaining the platform's traditional rear-wheel-drive layout. These elements underscored the B platform's evolution from postwar workhorses to refined family vehicles.

Coupes and Convertibles

The General Motors B platform supported a range of two-door coupes and s that emphasized sporty aesthetics and open-air motoring, particularly from the late through the . These variants included pillared sport coupes for everyday practicality and pillarless coupes that offered a sleek, frameless appearance, alongside convertible models featuring power-operated tops for enhanced leisure appeal. Early examples, such as the 1958 and convertibles, introduced these body styles on the full-size B platform, with production continuing until 1975 when the last full-size GM convertibles, like the , were built amid rising regulations and shifting consumer preferences. Design elements evolved to include rooflines in the 1960s, as seen on 1961–1964 coupes, which improved and contributed to the era's aerodynamic styling trends. Performance-oriented trims distinguished many B-platform coupes during the era, with the SS serving as a example from 1965 to 1973. Equipped with Super Sport packages featuring 396 cu in (6.5 L) or 427 cu in (7.0 L) V8 engines producing up to 425 horsepower, these models achieved 0–60 mph times under 7 seconds, blending full-size comfort with drag-strip capability. The SS was revived in 1994–1996 as a limited-production on the enduring B platform, shifting focus toward luxury with a 260-horsepower LT1 V8, though some variants offered the 3800 Series II V6 for more efficient performance. Other divisions produced notable two-door models, including the (1977–1978) on the B-body, known for its yacht-like styling and V8 power. Market trends reflected the popularity of these coupes in the , when annual sales exceeded 300,000 units across GM divisions, driven by the 's record 1,074,925-unit volume in , with two-door hardtops comprising a significant portion (sport coupes around 180,000). However, the and subsequent fuel shortages led to declining demand for large V8-powered two-door models, resulting in the discontinuation of B-platform coupes by the early 1980s, with convertibles ending in 1975; rare revivals like the 1994–1996 SS marked a nostalgic return before the platform's phase-out in 1996. Common options, such as the aforementioned V8s and later V6s, were shared across these variants for consistent .

Station Wagons and Limousines

The General Motors B platform supported a range of variants across its divisions, emphasizing utility for family transport and cargo hauling. The Estate, introduced in 1966 and produced through 1990, exemplified this with its extended body for increased load capacity, while the (1959–1987), (1970–1996), and (1971–1992) offered similar configurations tailored to brand-specific styling and luxury levels. These wagons featured extended wheelbases reaching up to 127 inches (3,226 mm) in pre-downsizing models, allowing for spacious interiors with forward-facing third-row seating that accommodated 8 to 9 passengers. Cargo capacity exceeded 100 cubic feet (2.8 m³) with rear seats folded, enabling transport of large items like 4x8-foot sheets while keeping the tailgate closed. A distinctive clamshell tailgate , used from 1969 to 1972, included a power-operated rear window that slid into the roof and a lower gate that dropped below the cargo floor for easy loading; woodgrain trim appliqués enhanced the exterior aesthetic on models like the Caprice Estate and Custom Cruiser. Station wagons accounted for approximately 10-15% of overall B-platform production, reflecting their niche role amid rising demand for sedans and coupes, though sales peaked in the 1970s before declining. Production of these models ended by 1996, supplanted by the surge in sport utility vehicles that offered similar utility with perceived off-road capability. Limousine variants on the B platform focused on luxury and extended passenger accommodations, with the Cadillac Fleetwood Limousine (1977–1996) serving as the primary example for high-end transport. Built on an extended wheelbase of approximately 140 inches (3,556 mm), it featured formal rear-facing doors, a partition window for privacy, and optional air suspension for a smoother ride. Armored configurations were available for dignitaries, incorporating reinforced body panels and ballistic glass while maintaining the platform's rear-wheel-drive layout. Cadillac models from 1977 onward used the D-body, a stretched variant of the B platform for luxury sedans and limousines.

References

  1. https://aldanamerican.com/blog/history-of-the-gm-b-body/
  2. https://www.curbsideclassic.com/automotive-histories/the-gm-b-body-a-love-song-in-b-major/
  3. https://www.hagerty.com/media/car-profiles/when-the-b-body-went-from-downsized-progressive-to-full-sized-traditionalist/
  4. https://www.vintagecarcollector.com/vehicles/2300/1926-oldsmobile-six
  5. https://www.conceptcarz.com/s11372/buick-master-six.aspx
  6. https://www.conceptcarz.com/s20911/oldsmobile-model-30-d.aspx
  7. https://auto.howstuffworks.com/chevrolet.htm
  8. https://over-drive-magazine.com/wp-content/uploads/2022/12/1936-Buick-Brochure-1-36.pdf
  9. https://macsmotorcitygarage.com/video-gm-builds-25-million-cars-1940/
  10. https://www.curbsideclassic.com/automotive-histories/automotive-history-1949-50-the-mystery-of-the-missing-b-body-part-1/
  11. https://macsmotorcitygarage.com/chevrolets-first-new-postwar-cars-1949-fleetline-and-styleline/
  12. https://www.hotrod.com/news/how-gms-radical-1959-chevrolet-came-to-be
  13. https://macsmotorcitygarage.com/gms-controversial-57-70-x-frame-cars/
  14. https://auto.howstuffworks.com/chevy-348-cid-v-8-engine.htm
  15. https://www.hagerty.com/media/car-profiles/overshadowed-by-a-certain-pony-car-chevrolets-b-bodies-shined/
  16. https://www.hemmings.com/stories/1965-66-chevrolet-impala/
  17. https://www.nytimes.com/1966/01/05/archives/auto-makers-set-sales-mark-in-65-industry-total-93million-as.html
  18. https://www.assemblymag.com/articles/85863-gm-centennial-manufacturing-innovation
  19. https://hymanltd.com/vehicles/6676-1949-cadillac-60-special-fleetwood-sedan/
  20. https://www.ultimatecarpage.com/forum/showthread.php?45354-Chevrolet-Caprice-(3rd-gen)-1977-1990
  21. https://macsmotorcitygarage.com/downsizing-the-bow-tie-1977-chevrolet-impala-and-caprice/
  22. https://vehiclenanny.com/1977-chevrolet-caprice-engineering/
  23. https://case.hks.harvard.edu/general-motors-and-the-corporate-average-fuel-economy-standards/
  24. https://www.automobile-catalog.com/production/chevrolet_usa/caprice_4gen.html
  25. https://www.autoevolution.com/news/this-chevrolet-is-a-part-caprice-part-impala-history-channel-star-146067.html
  26. https://www.curbsideclassic.com/cars-of-a-lifetime/coal-1991-chevrolet-caprice-living-up-to-a-legend/
  27. https://blog.1aauto.com/letter-general-motors-body-styles-mean/
  28. https://www.hotrod.com/features/fullsize-flyers-gm-b-bodies-that-rethink-the-hot-rodding-credo
  29. https://www.hemmings.com/stories/1926-buick-master-six-profile/
  30. https://www.curbsideclassic.com/automotive-histories/automotive-history-an-x-ray-look-at-gms-x-frame-1957-1970/
  31. https://www.curbsideclassic.com/automotive-histories/tech-history-vintage-article-the-perimeter-frame-body-and-frame-not-body-on-frame/
  32. https://www.hotcars.com/gm-cars-that-were-rust-buckets-and-that-never-rusted/
  33. https://www.hemmings.com/stories/the-class-of-1965-style-and-performance-soared-higher-in-a-milestone-model-year-60-years-ago/
  34. https://www.speedwaymotors.com/the-toolbox/gm-10-bolt-identification-and-upgrades-7-625-7-5-8-2-8-5-8-6/143507
  35. https://macsmotorcitygarage.com/whats-in-a-name-chevrolet-positraction/
  36. https://www.hotrod.com/how-to/small-block-chevy-engine-history
  37. https://www.hemmings.com/stories/1970-1972-chevelle-ss-454/
  38. https://notoriousluxury.com/2014/03/17/5-7-litre-lt1-1996-fleetwood-1996-impala-ss/
  39. https://www.topspeed.com/forgotten-american-station-wagon/
  40. https://www.curbsideclassic.com/automotive-histories/all-those-glamorous-four-door-hardtops-part-2-1965-1969-in-sizes-s-m-l-xl/
  41. https://www.curbsideclassic.com/curbside-classics-american/curbside-classic-1970-chevrolet-caprice-iris-and-albert-make-a-trip-to-houston/
  42. https://www.automobile-catalog.com/production/chevrolet_usa/full-size_chevrolet_7gen.html
  43. https://rpmcanada.ca/legal-muscle-chevys-9c1-box-car/
  44. https://macsmotorcitygarage.com/oldsmobiles-class-of-1963/
  45. http://www.policecarwebsite.net/thepolicepackage/gm/caprice1991.html
  46. https://www.hemmings.com/stories/the-enduring-allure-of-gms-bubbletop-coupes-thin-pillars-big-value/
  47. https://www.curbsideclassic.com/automotive-histories/the-last-full-size-convertibles-the-end-of-an-era/
  48. https://www.caranddriver.com/features/g15379885/fins-fleets-and-everything-in-between-a-visual-history-of-the-chevrolet-impala/
  49. https://www.motortrend.com/vehicle-genres/chevrolet-impala-history-generations-specifications/
  50. https://www.autoevolution.com/news/auto-evolution-a-car-that-had-no-business-going-extinct-the-chevrolet-impala-story-211335.html
  51. https://macsmotorcitygarage.com/muscle-memory-chevys-1994-1996-impala-ss/
  52. https://macsmotorcitygarage.com/buick-riviera-rides-again-1977-78/
  53. https://bestsellingcarsblog.com/1971/01/usa-1960-1970-chevrolet-impala-breaks-records/
  54. https://www.348-409.com/production.html
  55. https://www.oldcarsweekly.com/news/60-plus-years-of-impala
  56. https://www.curbsideclassic.com/blog/curbside-classic-1973-chevrolet-caprice-estate-wagon-still-doing-its-big-job/
  57. https://carbuzz.com/buick-roadmaster-wagon-history/
  58. https://www.hagerty.com/media/opinion/klockau-classics/1986-1992-oldsmobile-custom-cruiser/
  59. https://gmauthority.com/blog/2020/01/this-1976-pontiac-grand-safari-station-wagon-is-a-monster-from-gms-past/
  60. https://over-drive-magazine.com/wp-content/uploads/2023/12/1968-Chevrolet-Station-Wagons-Brochure-1-16C.pdf
  61. https://www.curbsideclassic.com/vintage-reviews/vintage-review-1973-chevrolet-caprice-estate-in-a-giant-clam/
  62. https://www.hagerty.com/media/archived/late-stage-leviathans-american-station-wagons/
  63. https://www.automobile-catalog.com/car/1975/186005/cadillac_fleetwood_seventy-five_limousine.html
  64. https://gmauthority.com/blog/2024/12/1996-cadillac-fleetwood-brougham-presidential-limousine-up-for-auction-in-florida/
  65. https://macsmotorcitygarage.com/when-dinosuars-roamed-the-earth-1993-96-cadillac-fleetwood/
Add your contribution
Related Hubs
User Avatar
No comments yet.