Hubbry Logo
Model F keyboardModel F keyboardMain
Open search
Model F keyboard
Community hub
Model F keyboard
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Model F keyboard
Model F keyboard
Model F keyboard
View on Wikipedia
from Wikipedia

The Model F was a series of computer keyboards produced mainly from 1981–1985 and in reduced volume until 1994 by IBM and later Lexmark.[1] Its mechanical-key design consisted of a buckling spring over a capacitive PCB, similar to the later Model M keyboard that used a membrane in place of the PCB.

The Model F first appeared with the IBM System/23 Datamaster all-in-one computer. It is best known as part of the IBM Personal Computer in 1981 with some keycap label differences, and its subsequent release with the IBM Personal Computer/AT, where it was reconfigured with the AT protocol and some layout revisions.[1][2] After the introduction of the Model M keyboard, production was ramped down and eventually limited to replacement units for existing installations.

The capacitive design is widely considered superior to that of the later membrane design used on the Model M.[3] It has a lighter actuation force of about 600 mN, a crisper feel, and louder feedback. It also has a higher MTBF of over 100 million keypresses, and full n-key rollover. These advantages were sacrificed in the Model M in order to lower manufacturing costs.

IBM Model F (1984)
The sound of an IBM Model F from 1984.
Problems playing this file? See media help.

Variations

[edit]

Many IBM keyboards were based on Model F technology, featuring different keycaps, layouts and connections:

Name PN Description Image
Model F 'XT' 1801449 Released in 1981 with the original IBM PC. Uses an XT connector. 83-key PC/XT keyboard
Model F 'AT' 6450200 (US version) [1] Released in 1984 with the IBM PC AT. Uses an AT connector. 84-key PC/AT keyboard
Model F '122-key terminal keyboard' 611034x Terminal keyboard originally released for the IBM PC 3270. Later used with some IBM terminal equipment. Uses an IBM proprietary terminal connector. 122-key keyboard
Model F '104-key terminal keyboard' 1387033 Terminal keyboard released for the IBM 5085 and IBM 3290.[1]
Model F '3178 blue switch 87-key' 6019284 87-key keyboard released for the IBM 3178, so named because of the blue toggle switch on the top half.[4]
Model F '4704 62-key' 6019284 62-key keyboard released for the IBM 4704[5]
Model F '4704 107-key' 6020218 107-key keyboard released for the IBM 4704
Model F '4704 50-key' 6019273 50-key keypad released for the IBM 4704
Model F 'Displaywriter' ? Keyboard released for the IBM Displaywriter System,[1] these Model F keyboards featured fully white keys.

Enthusiasts and modern re-creation

[edit]

From April 1986 IBM shipped the PC AT and PC XT with the Model M keyboard.[6] The enthusiast community around the Model M also prizes Model Fs and restores them for use with modern systems, though fewer are still in use due to lower production volume and a layout that is somewhat awkward and limited by modern standards.

Since 2016 a project has been underway to manufacture for sale keyboards with a faithful re-creation of the model F mechanism, completely independently of IBM.[3][7][8] The New Model F has two variants which both resemble the 4704, but with default layouts tweaked in the direction of a Model M (notably using an inverted-T arrow-key cluster rather than the old-fashioned cross layout of the original Model Fs). This project has attracted over 25,000 subscribers and began shipping in December 2019.

Design

[edit]
Model F capacitive pads from an opened assembly
Corrosion occurring on a Model F 122 terminal keyboard along with dust

The Model F's key-switch design was more durable than IBM's previous beam-spring mechanism, which was prone to failure from debris and was more complex to manufacture and service.[9] The spring assembly consisted of a top metal plate with cut holes where the plastic spring barrels reside; a bottom sheet of metal then holds the assembly together and compresses the contact sheet with a foam spacer. Earlier Model F keyboards cannot have their space bars removed without disassembling the internal assembly; this also causes a slightly different feel response from the space bar specifically: some enthusiasts modify the tension of the stabilizer on these early Model F keyboards to provide a more satisfactory response.[10]

The top metal plates in Model F keyboards are prone to corrosion and the internal foam can also rot from age, which often requires cleaning and a coating to prevent further corrosion. All Model F internal assemblies are held together with metal tabs, unlike the Model M which uses melted plastic rivets requiring more rivets to be melted on or modified with bolts.[11]

A characteristic feature of the Model F is a plastic top shell painted with a cream paint to create a rough texture. The later Model M keyboards used injection plastic rather than paint to achieve this texture. The plastic used in the Model F is quite brittle and prone to hairline cracks, and the paint can wear off from excessive use.

Comparison with Model M

[edit]
A comparison between a Model F spring (left) and a Model M spring (right); the Model M uses a spring with fewer windings and smaller plate for the plastic membrane underneath.

Although the Model F and Model M are both based on buckling-spring technology, there are considerable differences between them:

Model F Model M
External chassis Painted plastic (zinc metal in the 4704 series) and steel metal
back panel (plastic in the F AT and zinc metal in the 4704 series) 		Molded (unpainted) plastic, plastic back panel
Internal stabilizer Only in early models
Buckling spring implementation Capacitive plate Plastic membrane
Key rollover Unlimited 2-key rollover[12][unreliable source?]
Assembly method Reusable metal tabs Single-use plastic rivets
Spring barrels Individually inserted in a metal plane Single plastic mold with predefined barrels

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Model F keyboard

View on Grokipedia
from Grokipedia
The Model F keyboard is a family of mechanical computer keyboards developed and manufactured by , featuring innovative buckling spring key switches combined with capacitive non-conductive contact sensing for reliable input detection. Introduced in , these keyboards were designed for durability and superior tactile feedback, utilizing a patented mechanism where a pre-compressed helical spring buckles under key to produce a crisp snap action and audible click, enabling precise actuation without physical contact between moving parts. The Model F series debuted with the IBM 5322 System/23 Datamaster portable computer and the original IBM PC (5150), marking a shift from earlier beam spring designs to a more compact and cost-effective alternative while maintaining high reliability for professional and applications. Over its production run from 1981 to 1994, produced various models tailored to specific systems, including the 83-key F/XT for the IBM PC, the 84-key F/AT for the IBM PC AT, and larger 122-key variants like the "" for the terminal emulator. These keyboards featured robust all-metal construction—often weighing 8 to 10 pounds—with steel plates and frames that contributed to their legendary build quality and repairability, using uniform dye-sublimated keycaps and simple tools for disassembly. Priced at around $600 in the (equivalent to over $2,000 today), the Model F was favored in banking and enterprise environments for its ergonomic feel and resistance to wear, though its capacitive design required specialized controllers, limiting widespread adoption compared to the later, more affordable Model M introduced in 1985. Production continued in limited forms through until the mid-1990s, after which the keyboards became collector's items due to their scarcity and enduring reputation as a pinnacle of keyboard .

History

Origins and Development

In the late 1970s, transitioned from its earlier beam spring keyboards, used in terminals like the 3270 series since 1971, to a new spring design aimed at enhancing manufacturing efficiency and component durability. This shift was driven by the work of IBM engineer Richard Hunter Harris, who developed the core concept of a catastrophically compression column switch and , patented in 1972 following an initial filing in 1971. The mechanism provided snap-action tactile feedback through the controlled of a spring column under axial load, marking a pivotal evolution in 's . A refined version, the buckling spring torsional snap actuator, was patented by Harris in 1978, with the application filed in August 1977. This incorporated a rocker-style that used the torsional force from the buckling spring to pivot and register key presses, minimizing mechanical complexity compared to prior designs. The development emphasized high reliability by reducing the number of susceptible to wear, while integrating to detect key actuation without physical electrical contacts, thereby improving long-term performance and resistance to environmental factors like and . These innovations addressed limitations in earlier capacitive beam spring systems, which relied on more intricate metal components for spring action and feedback. The buckling spring technology debuted in production with the Model F series in 1981, integrated into the portable computer, marking the first production use of the Model F series. This model represented the culmination of late-1970s prototyping and testing efforts at IBM's facilities, focused on office terminal applications, where the design's durability and consistent tactile response proved advantageous for extended sessions. Early testing validated the system's robustness, paving the way for broader adoption in IBM's terminal and lineup.

Production Timeline

The original Model F keyboards entered production in early 1981 at the company's facility (plant code 23), coinciding with the debut of the in July 1981. This marked the beginning of full-scale manufacturing for the series, which was designed as a high-end featuring capacitive switching and buckling spring mechanisms. Initial output focused on bundles, with the 83-key Model F XT variant bundled with the IBM PC 5150 in August 1981 and the IBM PC XT 5160 in March 1983. By 1982, approximately 70% of 's Model F production capacity was allocated to keyboards for personal computers, reflecting the rapid adoption of the IBM PC line. Key milestones in the production timeline included the introduction of the 84-key Model F AT variant in August 1984 for the IBM PC/AT 5170, which incorporated an updated layout to support the new system's requirements. Simultaneously, IBM expanded Model F production for terminal applications, such as the 122-key variant for 3270 systems, which became a staple in enterprise environments. Manufacturing remained under IBM's control through 1990, with facilities handling both PC-compatible and terminal models, though volumes began to decline in the mid-1980s as the company shifted resources. In March 1991, IBM divested its keyboard manufacturing operations, including remaining Model F production, to form International through a . continued limited production of Model F keyboards, primarily for terminal systems like the 122-key models, at reduced volumes until around 1994. Overall, the series saw peak output in the early tied to PC sales, with total units estimated in the low millions, though exact figures are not publicly documented by . Production of the original Model F line ceased by the mid-1990s due to IBM's strategic pivot toward cost-effective alternatives, particularly the membrane-based Model M introduced in 1985, which offered similar tactile feedback at lower manufacturing expenses. The market's growing demand for affordable peripherals further accelerated the phase-out, as capacitive designs proved more expensive to produce amid commoditization of PC components.

Design

Buckling Spring Mechanism

The spring mechanism is the core key switch technology employed in the Model F keyboard, consisting of a coiled helical compression spring mounted beneath each . When a key is pressed, the spring compresses axially until it reaches a critical point of instability, laterally in a rapid, catastrophic manner to drive a small hammer or plate that strikes a underlying capacitive . This action registers the keystroke while simultaneously providing distinct tactile and audible feedback through the spring's snap-back and the hammer's impact. The physics of the mechanism relies on the spring's pre-compressed state and angled mounting within the key housing, which directs the directionally to create a torsional snap effect. Upon depression, the spring shortens and bows outward at approximately 2.7 of travel, collapsing over center to generate a sharp "click" sound and a pronounced tactile bump as the force curve drops suddenly due to . The spring then resets elastically, aided by a thin sheet that returns the to its resting position after full travel of about 4.2 . This design ensures precise actuation without requiring complex mechanical linkages, contributing to the mechanism's reliability. The actuation force for Model F buckling springs typically ranges from 60 to 70 grams, offering a lighter touch compared to some earlier designs while maintaining a peak tactile force of around 72 grams at the point. These switches are rated for a of over 100 million keystrokes, far exceeding many contemporary mechanical switches and enabling long-term use in demanding environments. Relative to IBM's prior beam spring technology, the buckling spring mechanism enables lighter overall keyboard weight and simplified through the use of injection-molded components rather than heavier metal assemblies. This allowed for more compact and cost-effective while preserving high actuation precision and feedback quality.

Capacitive Technology and Layout

The Model F keyboard employs a capacitive non-contact sensing mechanism, where depression of a key causes the buckling spring to drive a small conductive toward a pair of etched conductive pads on an underlying (PCB). This movement alters the between the pads, which is detected by the keyboard's controller through matrix scanning, eliminating the need for mechanical contacts prone to wear and enabling reliable key registration over millions of cycles. The layout of the Model F adheres to IBM's standardized designs, featuring variants such as the 83-key configuration for the PC/XT, the 101-key layout for the PC/AT, and the 122-key terminal model for systems like the 5250. These layouts maintain uniform key spacing with a 19 mm horizontal pitch (equivalent to 0.75 inches center-to-center), ensuring ergonomic consistency and compatibility with IBM's keycap profiles across models. Key structural features contribute to the Model F's and acoustic profile, including an all-metal backplate that provides exceptional rigidity and resistance to flexing under use. Thin foam sheets positioned between the barrel plate and the capacitive PCB serve as dampeners to absorb vibrations and modulate the characteristic buckling spring sound, while also securing the key barrels in place. The capacitive design inherently supports full n-key rollover (NKRO) for all keys simultaneously, depending on the controller and interface, facilitating accurate input in demanding scenarios without ghosting. Electrically, the Model F operates on 5V DC power supplied via the host interface, with early XT models using a proprietary 5-pin connector and later AT and terminal variants employing 5-pin DIN plugs, which were adaptable to the emerging PS/2 mini-DIN standard in subsequent systems.

Variations

Early and Terminal Models

The early Model F keyboards were introduced in 's terminal and office systems prior to widespread PC adoption, featuring capacitive buckling spring mechanisms tailored for and word processing tasks in mainframe environments. These variants emphasized durability and specialized layouts for professional use, often with higher key counts to support complex terminal functions like field navigation and command execution. The 5291 and 3270 terminal keyboards, deployed from the early 1980s through the 1980s, typically adopted 122-key layouts with dedicated function keys arranged in blocks for efficient mainframe interaction, housed in shells for . Part numbers such as 6110345 exemplified these designs, which included connectors like the DA-15 for direct terminal linkage, differing from later PC standards by prioritizing mainframe-specific features without consumer-oriented modifiers like Windows keys. Solenoids in some models provided audible feedback for key actions, enhancing tactile confirmation in noisy environments. In 1981, the Datamaster model marked the first consumer-facing buckling spring implementation in the Model F series, utilizing an 83-key compact design integrated into the 5322 desktop unit for computing. This variant, with part numbers like 1860783 and 8257796, featured internal cabling via 1x14 to 2x8 headers and a typewriter-style layout optimized for portability, representing an early shift toward all-in-one systems without external connectors. Displaywriter and related office variants from to offered specialized 83-key models for word processing, incorporating unique keycaps with locking tabs for precise document editing on systems like the 6580. Part numbers such as 1305671 highlighted low-profile ergonomic adjustments at 5° or 12° angles, while maintaining the core ; these keyboards, often in gray casings, focused on efficiency with added numeric pads but avoided the expansive function arrays of terminal models. Technical distinctions across these early models included elevated key counts—up to 122 for mainframe terminals versus 83-84 for units—to accommodate protocol-specific inputs, alongside early adoption of 5-pin DIN connectors in select configurations for simplified cabling in controlled settings. Unlike subsequent PC adaptations, these lacked provisions for graphical interfaces, emphasizing reliability in enterprise data handling.

PC-Compatible Models

The PC-compatible variants of the Model F keyboard were developed specifically for IBM's personal computer line, adapting the capacitive buckling spring design to standard desktop layouts and interfaces starting in the early . These models marked a shift from terminal-focused designs to consumer PC use, featuring compact key arrangements optimized for the emerging PC ecosystem. The inaugural PC-compatible Model F was the XT model, released in the third quarter of 1981 alongside the 5150 . This 83-key layout positioned the ten function keys (F1–F10) along the left side, with a single and a large L-shaped , eliminating a dedicated navigation block to fit the compact form factor. Bundled as standard with the PC and XT systems (such as the 5160), it carried part number 1501100 in the and utilized a proprietary 5-pin for its parallel interface protocol (scancode set 1). Production of the XT model continued through 1983, with pearl white PBT keycaps featuring dye-sublimated legends and a fixed coiled cable. Succeeding the XT, the AT model debuted in 1984 with the (model 5170), introducing an 84-key enhanced layout to accommodate the system's expanded capabilities. This version relocated the function keys to the top row, separated the from the main array, and added a dedicated key between the and positions, along with three status LEDs for , , and . The variant bore part number 6450200 and employed a 5-pin supporting bidirectional for advanced features like typematic rate adjustment. Manufactured until 1987, the AT model maintained the and buckling spring mechanism but incorporated minor refinements in PCB layout for PC/AT expansion bus compatibility. From 1986 onward, IBM produced extended-run PC-compatible Model F variants, including updated XT-style models with part number 8529297, which retained the 83-key layout but featured enhanced durability for prolonged use in environments. These later iterations shifted to or gray keycaps in some configurations for aesthetic alignment with evolving PC cases, along with improved cable shielding to reduce . By the late 1980s, select models gained compatibility with PS/2 ports through support or modified connectors, extending production into 1990 for systems despite the broader transition to Model M keyboards. Overall, these adaptations emphasized reliability and plug-and-play integration with PC hardware, distinguishing them from earlier terminal models through standardized layouts and connector evolutions.

Comparisons

With Model M

The Model F and Model M keyboards, both featuring IBM's iconic buckling spring mechanism, differ fundamentally in their switch technologies and construction, reflecting a shift toward efficiency in the latter. The Model F utilizes a capacitive buckling spring design, where a helical spring buckles under pressure to pivot an that alters the between plates, enabling precise, non-contact key registration without physical wear on contacts. In contrast, the Model M employs a membrane-based buckling spring, in which the buckling spring drives a rocker to physically close a switch beneath, transmitting force directly to complete an electrical circuit; this approach halves production compared to . The Model M's spring is notably thicker and stiffer than the Model F's, resulting in a slightly heavier actuation force around 65 grams (vs. ~60 grams for the Model F) and a rated durability of 25 million keystrokes (vs. 100 million for the Model F), designed for -effective robustness in high-volume use. These design choices also impact input reliability and . The Model F's capacitive supports true n-key rollover (NKRO), allowing simultaneous registration of all keys due to independent sensing per switch, which enhances performance in scenarios requiring multiple simultaneous inputs. Conversely, the Model M's matrix scanning limits it to 2-key rollover, potentially ghosting additional simultaneous presses in a row or column. Furthermore, the Model F's all-metal plate contributes to superior stability and a more solid typing foundation, reducing flex under pressure compared to the Model M's plastic components. Assembly methods further highlight the trade-offs between durability and maintainability. The Model F secures its internal components with metal tabs and screws, facilitating straightforward disassembly for repairs or cleaning without specialized tools. However, this reliance on exposed metal elements makes it prone to over decades, particularly on the barrel plates and springs, which can lead to intermittent failures if not addressed. The Model M, by contrast, uses plastic rivets to join its layers, rendering disassembly more challenging—often requiring drilling or "bolt modding"—but offering greater resistance to like . Production timelines underscore the Model M's role as a transitional successor. Introduced in 1985, the Model M served as a cheaper alternative to the premium Model F, leveraging simpler to reduce manufacturing expenses while retaining the buckling spring's tactile essence; by 1987, it had largely supplanted the Model F in IBM's standard offerings for personal computers.

With Contemporary Keyboards

The IBM Model F's buckling spring over capacitive switch mechanism integrates the spring directly into the key assembly, providing a crisp tactile feedback and distinctive acoustic profile that many enthusiasts describe as superior to the modular Cherry MX or optical switches found in most contemporary mechanical keyboards. Unlike Cherry MX switches, which rely on individual stem-and-housing designs that allow for easy hot-swapping without , the Model F's integrated system lacks this modularity, requiring disassembly for any switch modifications. Optical switches in modern boards, such as those using sensors for actuation, offer faster response times for gaming but sacrifice the Model F's characteristic "snap" and resonant sound, which stems from the spring's collapse against a . In terms of connectivity, the original Model F keyboards used 5-pin DIN or PS/2 ports, which supported full n-key rollover (NKRO) natively through their capacitive design, allowing simultaneous registration of all keys—a feature that predates and often surpasses the 6-key rollover (6KRO) limit common in many USB-based gaming keyboards today due to HID protocol constraints. Modern keyboards predominantly employ or wireless connections, enabling plug-and-play compatibility across devices without adapters, though achieving true NKRO over USB typically requires custom firmware like , which the Model F's legacy interfaces did not need. While PS/2 provided lower latency than early USB implementations, contemporary options add versatility for multi-device pairing but can introduce minor input lag compared to the Model F's wired reliability. The Model F's construction, featuring damped foam layers under the keycaps to reduce wobble and enhance stability, is prone to foam rot over decades, where degradation leads to crumbly residue that can interfere with the buckling springs and capacitive sensing. Additionally, electrolytic capacitors on the original controller boards are susceptible to corrosion and leakage, potentially causing intermittent key failures or complete non-responsiveness after prolonged exposure to humidity. In contrast, modern mechanical keyboards utilize solderless PCBs without foam dampeners or aging capacitors, minimizing such vulnerabilities through surface-mount components and epoxy potting, though they may introduce other issues like switch rattle from modular designs. The Model F's weight, typically ranging from 1.5 to 3 kg depending on the variant, aligns closely with premium 2020s boards like the Keychron Q series, emphasizing durable metal plating over lightweight plastics. The Model F's emphasis on precise, fatigue-reducing tactile feedback has influenced the design of enthusiast-oriented modern keyboards, such as those from Drop (now under ) and community projects reviving buckling spring mechanisms, including ongoing productions by Model F Labs as of 2025 (e.g., F77 and F122 models), though these adaptations often incorporate USB connectivity while retaining the core feel. However, the original lacks features like per-key RGB backlighting for visual customization or programmable macros via software like VIA or , which are standard in boards from Keychron and similar brands to support gaming and productivity workflows. This enduring appeal of the Model F's unadorned, focused typing experience continues to inspire high-end recreations, bridging 1980s engineering with today's modular ecosystems.

Legacy and Recreations

Enthusiast Community

The enthusiast community for the Model F keyboard has thrived since the early 2000s, centered around dedicated online forums such as Geekhack and Deskthority, where members share detailed restoration guides, including procedures for addressing issues through component checks and replacements. These platforms foster discussions on preserving the keyboard's original capacitive buckling spring mechanism, with threads often featuring step-by-step tutorials on disassembly, cleaning, and part sourcing to maintain functionality in vintage units. While Reddit's r/MechanicalKeyboards subreddit has also contributed to broader awareness, the specialized forums remain primary hubs for in-depth technical exchange among collectors and modifiers. Common activities within the community include sourcing original Model F keyboards from online marketplaces like , where mint-condition units typically sell for $200 to $800 depending on model and completeness, and rare 122-key terminal variants often exceed $500 due to their scarcity and appeal to dedicated collectors. Enthusiasts frequently modify these keyboards for modern compatibility, such as installing Teensy microcontroller-based USB adapters to convert the original XT or DIN interfaces to USB HID, enabling use with contemporary computers without altering the core hardware. Additionally, community-organized events like regional keyboard meetups provide opportunities for hands-on sharing of restoration techniques and custom builds, strengthening the network of hobbyists passionate about the Model F's tactile legacy. Restoration efforts face significant challenges from the keyboards' 40-plus years of age, including yellowing and brittleness in ABS keycaps that require careful cleaning with mild solvents to avoid further degradation, as well as sticky or corroded wire stabilizers on larger keys like the spacebar, which demand lubrication and realignment to restore smooth operation. Value appreciation has further complicated sourcing, with pristine examples commanding premiums that reflect the community's recognition of the Model F's durability and superior typing feedback compared to many modern alternatives. Culturally, the Model F holds status among typing enthusiasts, frequently featured in influential video reviews that highlight its crisp, responsive feel—often described as the "best feeling" for prolonged coding and writing sessions due to the precise capacitive actuation and buckling spring tactility. Channels like Chyrosran22 have popularized its sound and through comparative demonstrations, inspiring a that views the keyboard not just as hardware, but as a benchmark for mechanical input excellence.

Modern Reproductions

The New Model F project, initiated in 2016 by Model F Labs LLC through group buys on enthusiast forums, represents the primary effort to commercially reproduce Model F keyboards using original buckling spring mechanisms adapted for modern use. Production and shipping commenced at the end of 2019, with over 6,500 units shipped as of mid-2025, and ongoing shipments including the second batch of F122 keyboards starting in 2025. Available models include the F77 (a tenkeyless layout with 77 keys), the F122 (a full-size 122-key terminal-style board), and the Kishsaver (a compact 62-key 60% variant inspired by the F62). These reproductions retain the capacitive buckling spring switches for the distinctive tactile and auditory feedback of the originals while incorporating contemporary features such as connectivity with detachable cables, support for , , or xwhatsit firmware enabling n-key rollover (NKRO) and key remapping, and durable powder-coated aluminum or zinc cases in multiple colors. Prices start from around $249 for the F77 (on sale from $399) to $449 for premium configurations of the F122, with the Kishsaver starting at $275, as of late 2025. Beyond buckling spring models, Model F Labs expanded into beam spring revivals and ortholinear variants between 2023 and 2025, offering keyboards like the B122 (a 122-key beam spring terminal model) and split ortholinear layouts for alternative . Recent additions include the F15 split ergonomic, F Split ortholinear, and F50 macro pad, with shipments commencing in November 2025. Advancements in these reproductions include ANSI, ISO, and HHKB-style layouts compatible with Windows and macOS, along with firmware-driven customization options such as programmable layers and macros that enhance accessibility for users with varying needs—features absent in the originals. Modern production techniques, including improved PCB fabrication, address common durability issues like corrosion encountered in vintage units.

References

  1. https://patents.google.com/patent/US4118611A/en
  2. https://arstechnica.com/gadgets/2023/04/new-buckling-spring-keyboards-recreate-ibms-iconic-model-f-for-modern-computers/
  3. https://sharktastica.co.uk/wiki/ibm-model-f
  4. https://www.npr.org/sections/alltechconsidered/2017/07/14/537290841/this-10-pound-keyboard-from-the-1980s-is-making-a-comeback
  5. https://patents.google.com/patent/US3699296A/en
  6. https://sharktastica.co.uk/keyboard-timeline
  7. https://sharktastica.co.uk/wiki/ibm-buckling-spring
  8. https://www.nytimes.com/1992/03/27/business/company-news-ibm-spinoff-s-new-products.html
  9. https://nerdlypleasures.blogspot.com/2017/08/coming-full-circle-comparing-ibm-model.html
  10. https://www.modelfkeyboards.com/
  11. https://www.modelfkeyboards.com/manual/
  12. https://kishy.ca/?p=1613
  13. https://sharktastica.co.uk/topics/3101-3270-5250-comparison
  14. https://deskthority.net/viewtopic.php?t=27890
  15. https://sharktastica.co.uk/kb?id=1860783
  16. https://sharktastica.co.uk/wiki/ibm-model-f#5322
  17. https://deskthority.net/viewtopic.php?t=13658
  18. https://sharktastica.co.uk/wiki/ibm-model-f#Displaywriter
  19. http://www.os2museum.com/wp/pc-keyboard-the-first-five-years/
  20. https://sharktastica.co.uk/kb/1501100
  21. https://sharktastica.co.uk/kb/8529297
  22. https://patents.google.com/patent/US4528431A/en
  23. https://www.catb.org/~esr/faqs/compleat-classic-keyboard/index.html
  24. https://www.vogons.org/viewtopic.php?t=55804
  25. https://www.thekeyboardco.com/blog/index.php/2016/03/what-is-nkro-our-guide-to-rollover-anti-ghosting-and-choosing-the-right-keyboard/
  26. https://superuser.com/questions/16893/do-usb-or-ps-2-keyboards-respond-faster
  27. https://hackaday.com/2021/10/08/model-f-keyboard-restoration-goes-the-extra-mile/
  28. https://forum.vcfed.org/index.php?threads/ibm-model-f-keyboard-capacitive-pad-repair.1251391/
  29. https://geekhack.org/index.php?topic=95780.0
  30. https://www.tomshardware.com/news/model-f-mechanical-keyboards-buckling-spring-f77-f62%2C34954.html
  31. https://www.nytimes.com/wirecutter/reviews/our-favorite-mechanical-keyboards/
  32. https://www.modelfkeyboards.com/brand-new-model-f-january-2025-update/
  33. https://www.modelfkeyboards.com/about/
  34. https://www.ebay.com/b/IBM-Model-F/175690/bn_55189929
  35. https://blog.adafruit.com/2020/09/03/an-xt-to-usb-keyboard-adapter-using-a-teensy/
  36. https://www.modelfkeyboards.com/its-here-the-long-awaited-chyrosran22-brand-new-model-f-keyboard-youtube-review-has-been-released/
  37. https://www.modelfkeyboards.com/the-ultimate-ibm-model-f-review-xt-at-f104-f122-5291-4704-etc-capacitive-buckling-springs/
  38. https://geekhack.org/index.php?topic=79141.0
  39. https://www.modelfkeyboards.com/brand-new-model-f-june-2025-update/
  40. https://www.modelfkeyboards.com/product/f77-model-f-keyboard/
  41. https://www.modelfkeyboards.com/product/f62-model-f-keyboard-kishsaver/
  42. https://www.modelfkeyboards.com/product/classic-style-f122-model-f-keyboard/
  43. https://www.modelfkeyboards.com/product/beam-spring-b122-keyboard/
  44. https://www.modelfkeyboards.com/blog/
Add your contribution
Related Hubs
User Avatar
No comments yet.