Hubbry Logo
Number 8 wireNumber 8 wireMain
Open search
Number 8 wire
Community hub
Number 8 wire
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Number 8 wire
Number 8 wire
Number 8 wire
View on Wikipedia
from Wikipedia

A model showing a method for jury-rigging a rudder, an example of Number 8 wire mentality

Number 8 wire is a 0.16-inch-diameter (4.064 mm) gauge of wire on the British Standard Wire Gauge that has entered into the cultural lexicon of New Zealand.

Use for farm fencing

[edit]

Early farm fences in New Zealand were generally used to protect crops, gardens, and orchards from farm animals, rather than to contain the stock. Fencing methods used were post-and-rail fences, ditch-and-bank fences, stone walls, and hedges, but all proved too expensive to install and maintain to fence entire properties and tended to be unreliable. To prevent stock straying, boundary keepers were employed to patrol boundaries.[1] In the 1850s, heavy annealed iron wire became available for fences, but this wire was very thick and only came in short lengths, was hard to work and to keep taut, and was expensive to use. In England, in 1855, Henry Bessemer patented the Bessemer process that led to the mass production of low-cost high-quality steel, leading to the large scale production of affordable lighter gauge steel wire.[2]

The introduction of the new steel fencing wire of various gauges in the 1860s allowed the rapid construction of low-cost fencing and was quickly adopted for use on New Zealand sheep farms. Galvanised number 8 steel wire soon became the preferred standard. These new, lightweight steel wire fences were not suitable for cattle, as cattle would lean over or on the fences and damage or push the fences over. When barbed wire became available in 1879, it was used as the top wire and perhaps a lower additional wire in conjunction with No. 8 wire on fences on dairy and cattle farms to prevent the animals from damaging the fences. This further extended the use of number 8 wire.[2][3]

From the early 1960s, high-tensile 12½ gauge (2.5 mm) steel wire has largely replaced number 8 wire for New Zealand fencing, as it is lighter and cheaper, though also more difficult to work.[4] Since 1976, when New Zealand adopted the metric system, number 8 wire is officially referred to as 4.0 mm gauge wire, although the older term "Number 8 wire" continues to be commonly used.

In language and culture

[edit]

As a consequence of the ubiquitous use of number 8 wire in New Zealand, remote farms often had rolls of number 8 wire on hand, and the wire would often be used inventively and practically to solve mechanical or structural problems other than fencing.[5] Accordingly, the term "number 8 wire" came to represent the ingenuity and resourcefulness of New Zealanders,[6][7] and the phrase "a number 8 wire mentality" evolved to denote an ability to create or repair machinery using whatever scrap materials are available on hand.[8] New Zealand hardware and DIY store franchise Mitre 10 have adopted "Number 8" as their in house brand for generic hardware supplies and tools.[9]

The Waikato Museum runs an art award focused around and named after the wire.[10]

See also

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Number 8 wire

View on Grokipedia
from Grokipedia
Number 8 wire is a medium-gauge wire measuring 4.06 mm (0.160 inches) in diameter under the system, introduced to in the 1860s as a durable and affordable material for rural during the country's agricultural expansion. Beyond its practical use in constructing paddocks and boundaries, it has become a cultural emblem of Kiwi ingenuity, representing the resourceful, make-do attitude of who repurpose it for repairs, inventions, and everyday fixes in remote farming communities. This "number 8 wire mentality" emerged from the isolation of 19th-century settlers, who relied on such versatile tools to innovate with limited resources. The wire's origins trace back to the 1855 , patented by English inventor , which enabled of inexpensive, high-quality , transforming global practices from wooden or wrought-iron alternatives to efficient wire systems. In , its adoption accelerated in the amid rapid land development for , where it facilitated the subdivision of vast areas into manageable paddocks, supporting the export-driven economy that defined the nation's early growth. By the early , number 8 wire was a staple in households and workshops, often twisted, bent, or woven into tools and machinery parts. Today, while modern materials have largely replaced it in professional , number 8 wire endures as a nostalgic symbol in New Zealand's identity, invoked in media, , and to celebrate practical problem-solving and —traits rooted in the country's geographic remoteness and pioneering . In 1976, with New Zealand's shift to the , its specification aligned with 4.0 mm, yet the traditional name persists, underscoring its lasting cultural resonance.

Overview

Definition

Number 8 wire refers to a specific gauge of galvanized steel wire classified under the (SWG) system, with a of approximately 4.06 . This designation distinguishes it from other wires by its standardized imperial sizing, which was widely adopted for agricultural purposes. The term stems from 19th-century imperial wire measurement conventions in Britain, a system that continued to use for this product even after in the , leading to its common approximation as 4 mm wire today. In the context, it is inextricably linked to farming practices, particularly for constructing durable fences, and sets it apart from generic or varying gauges of wire due to its historical prevalence and cultural specificity.

Physical Properties

Number 8 wire is primarily composed of mild steel, characterized by its lower carbon content, which imparts a balance of strength and enhanced compared to higher-carbon variants. This composition enables the wire to be easily bent, twisted, or knotted without fracturing, making it particularly suitable for manual handling and improvised applications in agricultural settings. To protect against in outdoor rural environments, the wire is typically coated with a layer of or zinc-aluminum through , forming a sacrificial barrier that prevents formation even under exposure to and soil contact. Post-metrication in 1976, the standard diameter measures 4.0 mm, a slight adjustment from the original British specification of 4.06 mm for No. 8 gauge, ensuring consistency in modern production while maintaining compatibility with traditional tools and fixtures. The wire's tensile strength generally ranges from 400 to 600 MPa, providing sufficient robustness for tensioning in fences without the associated with higher-strength materials. These properties contribute to the wire's durability, with the zinc coating offering effective resistance to and enabling a of 20 to 30 years in typical rural conditions, depending on environmental factors such as and rainfall. The combination of flexibility and longevity supports its versatility, allowing it to withstand mechanical stresses like animal impacts while remaining pliable for repairs or custom configurations.

History

Origins and Early Adoption

The development of number 8 wire emerged in mid-19th-century Britain amid advancements in production and wire manufacturing standardization. The , patented by British engineer in 1855, enabled the of affordable, high-quality , which was crucial for creating lighter-gauge wires suitable for industrial and agricultural applications. Number 8 wire specifically referred to a gauge within the evolving British wire measurement systems, such as the British Standard Wire Gauge (SWG), which categorized wire diameters for consistency in trade and production during this era. Number 8 wire was introduced to in the late through colonial trade routes from Britain, aligning with the rapid expansion of the industry. Prior to this, heavier No. 4 black iron wire had been imported sporadically since the late 1850s, but it was costly and cumbersome to transport over long distances. The lighter, cheaper galvanized No. 8 wire quickly gained traction as imports increased, supporting the need for efficient in the growing pastoral economy. By the , sheep populations had surged—for instance, in the Amuri District from 237,000 in 1864 to 428,000 in 1870—driving demand for practical solutions. Early adoption of number 8 wire centered on boundary fencing for remote pioneer farms, where its affordability, pliability, and ease of proved invaluable in isolated settlements. While rugged high-country stations like Clent Hills (fenced with iron wire in 1863) and Blue Cliffs (1865) demonstrated the value of wire fencing, number 8 wire became widely used by the late 1860s to enclose vast paddocks, reducing reliance on labor-intensive shepherding and boundary riders while controlling diseases such as sheep scab. This practical utility in challenging terrains laid the groundwork for its later status as a of resourceful in .

Standardization and Metric Transition

In 1938, New Zealand established its first original national standard for galvanized fencing wire through NZSS 143, which defined specifications for quality, coating, and dimensions, positioning Number 8 wire—approximately 4.06 mm in diameter—as the benchmark for reliable material. This standard addressed inconsistencies in imported and locally produced wire, ensuring durability and uniformity essential for rural applications. Following , NZSS 143 supported New Zealand's agricultural expansion by standardizing Number 8 wire, which facilitated the development of consistent national infrastructure amid government initiatives to boost farming productivity and land subdivision. The emphasis on uniform wire helped streamline repairs and installations across vast farmlands, aligning with broader post-war policies aimed at economic recovery through enhanced agricultural output. New Zealand's process, initiated in the late and completed by 1976, led to the redesignation of Number 8 wire as 4.0 gauge under updated standards like NZS 3471:1974, which incorporated metric measurements for wire tensile strength and galvanizing. Despite this shift, the traditional "Number 8" nomenclature endured in practical and cultural contexts, reflecting resistance to full abandonment of imperial terminology in rural settings.

Production

Manufacturing Process

The manufacturing process of Number 8 wire starts with raw steel rods, typically mild or high-tensile , produced from local at smelters like , which began operations in the mid-1960s to supply the domestic market. These rods, around 5.5 mm to 8 mm in diameter, provide the foundational material for fencing wire tailored to New Zealand's rural needs. The core production involves , where the rod is fed into a series of lubricated dies that progressively reduce its to 4.0 , elongating the material and enhancing its uniformity and tensile properties. This cold-working step is followed by annealing, a controlled heating and slow cooling process in a furnace to relieve internal stresses, restore , and prevent , which is crucial for the wire's pliability in applications like tying fence posts. In facilities, such as those operated by Pacific Steel, this sequence ensures consistent quality for export-oriented rural products. Subsequently, the drawn and annealed wire is cleaned through in an to remove oxides and impurities, then fluxed to prepare the surface for . Galvanizing follows via hot-dipping, immersing in a molten bath at approximately 450°C, forming a protective layer that resists in harsh outdoor conditions. Local producers like Summit Steel & Wire often apply advanced zinc-aluminum s, such as Xtralife, for extended lifespan in New Zealand's variable climate, meeting export standards for agricultural durability. The finished wire is cooled, inspected for coating uniformity, and coiled into compact rolls, typically 25 kg, facilitating easy transport and handling for farmers and distributors. These steps, refined since the 1960s by companies like , emphasize efficient, high-volume production suited to the rural sector's demands.

Quality and Safety Standards

Number 8 wire, particularly in its applications, historically complied with the New Zealand Standard NZS 3471:1974 (withdrawn), which specified mechanical properties and galvanizing quality for plain and barbed galvanized wire in diameters from 2.0 to 4.5 mm, encompassing the 4.0 mm gauge typical of Number 8 wire. This standard defined two tensile grades: mild wire with a minimum (UTS) of 430 MPa for 4.0 mm diameter and elongation of at least 12% to ensure flexibility for tying and general use, while high-tensile variants require a UTS of 1050–1450 MPa with reduced elongation around 4–8% for strength in permanent fences. Coating requirements mandate a minimum zinc mass of 200 g/m² for heavy galvanizing on 4.0 mm wire, tested via the Preece test for adhesion and uniformity to prevent premature . Current products meet equivalent requirements under AS/NZS standards such as AS/NZS 4534 for zinc-aluminium coatings. To verify compliance and address common issues like from inconsistent drawing or from inadequate coatings, certified products carry the WIREMARK mark, a quality certification for 100% New Zealand-made fencing wire confirming compliance with relevant standards including AS/NZS 4534 for zinc-aluminium coatings. WIREMARK-endorsed Number 8 wire, often featuring a 95/5 zinc-aluminium (e.g., Xtralife), demonstrates superior durability with lifecycle expectations of 20–30 years in moderate environments, reducing risks and extending compared to traditional hot-dip galvanized options. Safety standards emphasize precautions for high-tensile Number 8 wire variants, which can store significant under tension, posing snap-back injury risks during installation or repair; guidelines from suppliers recommend using strainers, gloves, and gradual tensioning to mitigate lacerations or impacts. Environmentally, regulations under the Resource Management Act 1991 indirectly govern runoff from galvanized coatings through regional council consents for farm discharges, favoring low-leach -aluminium that minimize soluble release into waterways. The process, involving immersion in molten or , is thus optimized in WIREMARK products to balance resistance with ecological impact.

Applications

Fencing and Agricultural Uses

Number 8 wire, a 4 diameter mild wire, serves as a primary material for constructing boundary and internal fences to contain on farms. It is commonly deployed in multi-wire configurations, such as the standard seven- or eight-wire setups defined under the Fencing Act 1978, where wires are properly strained to form substantial barriers suitable for sheep, , and other stock. These fences typically incorporate up to two barbed wires for added deterrence or replace one plain wire with netting to prevent smaller animals from slipping through, ensuring effective stock management and prevention of straying. In agricultural applications, Number 8 wire is installed between posts spaced 3–5 meters apart, supported by wooden or wire droppers (also known as battens) placed at intervals of 0.5–1.5 meters to maintain even wire spacing and distribute pressure from . Strain posts, often 2.4–2.7 meters long and anchored with stays or braces, handle the tension at fence ends and corners, while grippers or strainers apply initial tension of 50–60 kg to keep wires taut without exceeding the material's yield point. This setup is prevalent in New Zealand's extensive farmland network, which supports and land division for pastoral farming. The wire's cost-effectiveness, with 25 kg rolls priced at approximately NZ$100–160 as of , combined with its pliability, makes it ideal for repairs in remote rural areas where specialized tools may be unavailable. Galvanized or zinc-aluminum coated variants enhance durability, lasting 20–40 years in outdoor conditions, reducing long-term maintenance costs for farmers managing diverse terrains and stock types. This practicality underpins its continued role in conventional post-and-batten fences, though high-tensile alternatives are increasingly adopted for new installations.

Improvised and Versatile Applications

Number 8 wire's flexibility, strength, and widespread availability on farms have made it a staple for impromptu repairs and adaptations, particularly in rural settings where specialized parts may be scarce. Farmers have long used it to mend broken machinery, such as replacing belts in hay balers to allow harvest work to continue without immediate access to factory components. These applications leverage the wire's 4 mm and tensile strength, enabling quick twists and ties that hold under moderate stress. In creating ad hoc tools, has been shaped into hooks for lifting or securing loads and snares for capturing small pests or in remote areas, drawing from its malleability without requiring additional equipment. Such uses highlight its role in bridging gaps in resource-limited environments, where a single roll could address multiple unforeseen needs. Historically, during New Zealand's pioneer era in the late 19th and early 20th centuries, settlers relied on for constructing rudimentary farm infrastructure beyond standard . It was commonly employed in improvised repairs and structures, essential for early homestead survival in rugged terrains. In modern contexts, Number 8 wire extends to creative DIY projects, such as crafting garden trellises by coiling it around supports for climbing , popular among hobbyists for its rust-resistant galvanized coating. Art installations have elevated its utilitarian image, with sculptures formed from bent and welded segments depicting everyday rural scenes; for instance, Gina Ferguson's "Wear 'n' Tear" won the 2021 Fieldays No.8 Wire National Art Award, commenting on labor through coiled wire forms combined with and gorse. The award took a break in 2024 but has showcased innovative uses annually since 2005. In survival scenarios, such as farming or , it remains vital for rigging emergency fixes in off-grid locations, underscoring its enduring adaptability in New Zealand's agricultural heartlands.

Cultural Impact

Number 8 Wire Mentality

The "number 8 wire mentality" refers to a distinctive aspect of culture characterized by resourcefulness and improvisation, particularly in solving problems with whatever materials are at hand. The phrase emerged in the to encapsulate the innovative spirit of Kiwis, shaped by the country's geographic isolation and reliance on limited imports until economic reforms in the opened up global trade. This mindset arose from practical necessities in rural and pioneering life, where access to specialized parts was scarce, fostering a tradition of adapting everyday items like wire for repairs and inventions. Key traits of this mentality include adaptability, using available resources, and a pervasive "can-do" attitude that emphasizes trial-and-error over perfection. It is exemplified in agricultural "farm hacks," such as rigging temporary machinery fixes with wire during shearing or planting seasons, which allowed farmers to maintain productivity despite equipment shortages. Similarly, the of the bungy jump cord by A.J. Hackett in the drew on this , repurposing industrial rubber shock cords—initially tested with basic splicing techniques—to create a safe yet thrilling that launched a global industry. These examples highlight how the mentality turns constraints into opportunities, often leveraging the physical versatility of common materials like number 8 wire for tensile strength and flexibility. In society, the number 8 wire mentality is promoted as a national virtue in education and contexts, encouraging and from curricula to corporate strategies. initiatives, such as the 2004 "Better by " program, have celebrated it as a foundation for and economic competitiveness, integrating it into vocational training to instill practical ingenuity in students and entrepreneurs. However, critics argue that this approach can discourage investment in specialized tools and protection, leading to non-scalable, ad-hoc solutions that limit commercial growth and contribute to lower rates compared to averages. For instance, while it excels in , it may foster a "she'll be right" complacency that undervalues long-term R&D infrastructure.

Representation in Language and Media

In , "number 8 wire" has become an idiomatic expression symbolizing resourcefulness and , often used to describe quick, makeshift solutions to problems using available materials. Common phrases include "fixed with number 8 wire," referring to ad-hoc repairs, and "No. 8 wire job," denoting a temporary or inventive fix that embodies practical ingenuity. This linguistic usage stems from the wire's historical prevalence in rural settings, where it was repurposed beyond fencing for everyday tasks. The concept features prominently in New Zealand media, portraying rural and the "can-do" spirit. In the 2005 film , directed by , the protagonist exemplifies this through his resourceful modifications to a vintage , using everyday items in a manner akin to number 8 wire improvisation. Television series like No 8 Wired (1999–2000), a rural news program on Prime Television, highlighted agricultural stories that often invoked the wire's versatility in farming contexts. Advertisements, such as those from agricultural brands, have also celebrated it; for instance, a 2019 travel documentary episode titled "Get Some Number 8 Wire" explored journeys emphasizing Kiwi adaptability. Radio New Zealand's podcast The Aotearoa History Show dedicated an episode in 2022 to the wire's , discussing its role in fostering amid isolation. Literary and artistic representations further embed number 8 wire as a symbol of resilience. In poetry, the 2019 anthology Number Eight Wire, edited by Sandra Simpson and Margaret Beverland, collects 330 by 70 poets, using the wire as a thematic motif for simplicity and endurance in . Sculptures often incorporate the material literally; the annual Fieldays No.8 Wire National Art Award, held since 2007 at the National Agricultural Fieldays, challenges artists to create works from fencing wire, with winners like Ricks Terstappen's 2023 piece "Connectivity" exploring themes of linkage and rural heritage. Community events tied to this award foster public engagement, showcasing installations that highlight the wire's transformative potential in art.

References

  1. https://www.engineeringtoolbox.com/swg-standard-wire-gauge-d_1779.html
  2. https://www.rnz.co.nz/programmes/the-aotearoa-history-show/story/2018857955/season-2-ep-11-number-8-wire
  3. https://www.stuff.co.nz/business/farming/opinion/104068007/on-the-fence-the-history-of-number-8-wire
  4. https://www.summitsteel.co.nz/products/fencing-products
  5. https://www.motovated.co.nz/genesis-kiwi-ingenuity/
  6. https://store.nzfarmsource.co.nz/catalog/nz-wire-low-tensile-wire-zinc-aluminium-coated-2-life-4mm-no-8-wire-25kg/204454
  7. https://cdn.fld.nz/uploads/sites/pauatahanui/files/Rural_Info/2016_Conventional_Farm_Fencing.pdf
  8. https://www.nzfencingsolutions.co.nz/products/w002-wire-4-mm-25kg
  9. https://www.stuff.co.nz/waikato-times/118840295/number-eight-wire-tradition-continues-with-the-fence-post
  10. https://eprints.lse.ac.uk/22518/1/1807Velkar.pdf
  11. https://www.doc.govt.nz/documents/science-and-technical/sap240d.pdf
  12. https://www.standards.govt.nz/about/who-we-are/ninety-years-of-improving-standards-for-a-better-new-zealand
  13. https://www.nzsteel.co.nz/new-zealand-steel/the-story-of-steel/new-zealand-steel-through-the-years/
  14. https://www.pacificsteel.co.nz/
  15. https://www.vulcanwire.com/a-guide-to-galvanized-wire-manufacturing/
  16. https://sivaco.com/en/steel-wire-transformation-processes/
  17. https://www.standards.govt.nz/shop/nzs-34711974
  18. https://onlinelibrary.wiley.com/doi/10.1155/2014/123195
  19. https://www.cyclonewire.co.nz/technical/useful-information
  20. https://sdalu.co.nz/the-ultimate-guide-to-fence-wire-tools/
  21. https://www.galvanizing.org.nz/docs/GAA_GANZ_Guide_to_Durability_of_HDG_1.pdf
  22. https://www.legislation.govt.nz/act/public/1978/0050/latest/whole.html
  23. https://www.strainrite.co.nz/product-category/wire-tensioning/
  24. https://shop.farmlands.co.nz/products/summit-no8-wire-4mm
  25. https://teara.govt.nz/en/inventions-patents-and-trademarks/page-1
  26. https://www.nzherald.co.nz/waikato-news/news/thought-provoking-concept-and-creative-transformation-of-no8-wire-is-a-winner/XMT7SRH6QVRY4XBD32GK2VB5BM/
  27. https://www.farmersweekly.co.nz/news/fieldays/no-8-wire-art-award-takes-a-break/
  28. https://www.mondaq.com/newzealand/patent/292020/why-new-zealands-number-8-wire-mentality-is-bad-for-the-economy
  29. https://www.thepost.co.nz/nz-news/350210568/world-famous-inventions-you-didnt-know-were-nz
  30. https://www.beehive.govt.nz/speech/launch-better-design
  31. https://www.treasury.govt.nz/publications/tprp/international-connections-and-productivity-making-globalisation-work-new-zealand-tprp-09-01
  32. https://exilelifestyle.com/number-8-wire-kiwis-conquer-internet/
  33. https://www.nzonscreen.com/collection/No-8-Wire-on-screen
  34. https://www.nzonscreen.com/title/no-8-wired-1999
  35. https://www.bbc.com/video/docs/episode/p0ld5wpy
  36. https://bookhub.co.nz/p/number-eight-wire
  37. https://www.fieldays.co.nz/further-afield/news-from-further-afield/connectivity-wins-the-2023-fieldays-no-8-wire-national-art-award
  38. https://tewharetaonga.nz/explore/news/award-winning-sculptor-to-judge-fieldays-no-8-wire-national-art-award
Add your contribution
Related Hubs
User Avatar
No comments yet.