Hubbry Logo
Remington Model 17Remington Model 17Main
Open search
Remington Model 17
Community hub
Remington Model 17
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Remington Model 17
Remington Model 17
Remington Model 17
View on Wikipedia
from Wikipedia

In 1915 John Browning patented a pump-action shotgun with the following features: hammerless, under-loading, tubular-magazine, bottom-ejecting, and take-down. This design would eventually become the Remington Model 17.[2] Manufacturing rights were sold to Remington Arms shortly after, but due to the production efforts of World War I, Remington was unable to begin manufacturing until 1921. Before production began John Pedersen made alterations to the design, with more changes made later by G. H. Garrison. The Model 17 was a trim, 20-gauge shotgun that served as the design basis for three highly successful shotguns: the Remington Model 31, the Ithaca 37 and the Browning BPS. Additionally, features of the Model 17 were also incorporated in the later Mossberg 500 and Remington 870.

Key Information

Remington Model 17R

[edit]

The Remington Model 17R (R for "Riot") was produced with a 20 inch barrel. It did not sell well however a cut-down version featuring a 15.1 inch barrel and a pistol grip gained popularity with Detectives, marketed as the "Model 17R Special Police". Major purchases of this shotgun were made by the New York Police Department and the St. Louis Metropolitan Police Department. The shotgun was referred to as a "Whippit Gun" due to its ease of use to "whip it out and fire". Variants can be found with the short barrel and fixed stock as opposed to pistol grip depending on officer preference. The shotgun is considered a predecessor of the modern full stocked 14-inch combat shotguns favored by law enforcement.[3]

Illustration of the Remington Model 17 Special Police Gun

Users

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Remington Model 17

View on Grokipedia
from Grokipedia
The Remington Model 17 is a pump-action, chambered exclusively in 20 gauge, featuring a tubular magazine, bottom-ejecting mechanism, and takedown design for easy disassembly and cleaning. Designed primarily by John M. Browning with contributions from Remington engineer John D. Pedersen, it incorporates Browning's 1915 patent (U.S. Pat. No. 1,143,170) for its innovative slide-action system. Production was delayed by but began in 1921, continuing until 1933, with approximately 73,000 units manufactured across various grades including the standard Model 17A, riot Model 17R, and police variants. Introduced at a price of $60.92 for the , the Model 17 was marketed for , sport shooting, and , with its bottom-ejection system enabling ambidextrous use by allowing spent shells to fall downward rather than to the side. Key features include a five-round capacity (four in the magazine plus ), compatibility with both 2½-inch and 2¾-inch shells, an internal for a streamlined appearance, and the ability to "slam-fire" by holding the trigger while pumping the action for rapid follow-up shots. Barrel lengths varied from 20 inches on and police models to 26 or 28 inches on standard sporting versions, with overall weights ranging from about 4.5 pounds for compact police guns to 5.25 pounds for configurations. Post-war, it gained popularity among civilian shooters for its smooth operation and versatility, with higher-grade models like the 17F Premier featuring elaborate engraving and walnut stocks. The design represented Remington's last bottom-ejecting , influencing later pump-actions but ultimately overshadowed by the more successful Model 12. Serial numbers ranged from 1 to 73,000, providing collectors with a clear production timeline.

History

Development

John M. Browning initiated the design of a new pump-action shotgun in 1913, filing for patent protection on November 26 of that year, which was subsequently granted as U.S. Patent No. 1,143,170 on June 15, 1915. This design featured innovative elements such as a hammerless mechanism, under-loading tubular magazine, and bottom-ejecting system, marking it as Browning's final repeater-type shotgun project. Shortly before the patent's issuance, Browning granted manufacturing rights to and Ammunition Company, establishing the foundation for what would become the Model 17. In 1919, Remington engineer John D. Pedersen refined Browning's original design, incorporating key modifications to enhance usability for both right- and left-handed shooters by directing spent shells downward away from the operator's face. Pedersen's contributions were formalized through his patent application filed on September 15, 1919, and granted as U.S. Patent No. 1,429,621 on September 19, 1922, ensuring the design's practicality and safety for diverse users. The progression to production was hindered by , as Remington's facilities were overwhelmed with military contracts for rifles and other arms, postponing civilian manufacturing until after the war. Prototype testing and final refinements occurred in 1919, culminating in the design's readiness by 1921, when the Model 17 was announced for production.

Production

Production of the Remington Model 17 began in 1921 at the Company, Inc. facility in , as the company recovered from its extensive manufacturing commitments. The shotgun, based on John Browning's foundational patent from June 15, 1915, was introduced in Remington's first catalog of late 1920 or early 1921, marking the firm's reentry into civilian firearms production. Remington records indicate 72,644 Model 17 shotguns were shipped between 1921 and 1941, though production totaled approximately 73,000 units over the 12-year run, with ranging from 0 to 74,020. Detailed shipping records indicate steady output in the later years, starting from 35,637 on January 19, 1926, and continuing through 74,020 by October 6, 1933, though comprehensive yearly breakdowns for the early 1920s remain limited. Manufacturing ceased in 1933 with the introduction of the as its successor, a design that addressed evolving market demands for improved pump-action shotguns. While inventory sales continued until , the end of active production reflected broader shifts in the firearms industry during the early years of the .

Design

Key Features

The Remington Model 17 is distinguished by its innovative pump-action mechanism, which utilizes a slide-action design to cycle shells efficiently by reciprocating the . This allows for rapid follow-up shots, as the shooter can maintain pressure on the trigger while pumping, enabling semi-automatic-like operation without the complexities of gas or inertia systems. A defining feature is the bottom-loading and bottom-ejection system, where shells are inserted and expended casings are expelled through the underside of the receiver. This ambidextrous configuration eliminates side bias, making it particularly suitable for left- and right-handed users in dynamic field scenarios, and reduces the risk of interference in confined spaces. The design incorporates an internal hammer within a closed receiver, paired with a tipping-bolt locking system, which minimizes external protrusions that could snag on or . This enhances overall reliability by protecting from debris and simplifying the action for smoother, more dependable operation during extended use. Complementing these elements is the takedown feature, achieved by loosening the fore-end cap to separate the barrel and magazine tube from the receiver. This facilitates straightforward disassembly for cleaning, maintenance, or compact transport, promoting longevity and user convenience in rugged outdoor environments. The tubular magazine, fed from the bottom, provides a reliable feeding system integrated into the design's underbelly, supporting sustained shooting capacity tailored to its 20-gauge chambering. The overall trim and lightweight construction, leveraging a streamlined frame and high-quality components, optimizes balance and maneuverability for field applications such as .

Specifications

The Remington Model 17 is a 20-gauge pump-action with a design.
SpecificationDetails
20 gauge (2½-inch and 2¾-inch shells)
Weight5.75 lb (2.6 kg) unloaded
Barrel length26 to 30 inches, with options for full or modified chokes
Overall lengthApproximately 45 to 49 inches, depending on barrel length
SightsSimple brass bead front sight
Feed system5-round tubular magazine (4+1 capacity)
Action typePump-action, , bottom-ejecting

Variants

Standard Model

The Standard Model of the Remington Model 17, known as the 17A grade, represented the baseline configuration for civilian sporting use as a lightweight 20-gauge pump-action with bottom-ejecting . It featured barrels measuring 26 to 30 inches in length, constructed from Remington steel and fitted with wooden stocks optimized for field handling. This setup provided a balance of maneuverability and reach, making it well-suited for hunting pursuits in varied terrain. Available in multiple grades, the (17A) utilized basic plain wood without ornamentation, emphasizing functionality for everyday hunters, while the grade (17F) elevated the design with select high-quality wood, checkering, and fine for discerning sportsmen seeking aesthetic refinement. Other grades included the 17B Special Grade, 17D Grade, and 17E Expert Grade, introduced in , offering progressive enhancements in wood quality, checkering, and . Stocks in these configurations were predominantly straight-grip styles to promote a natural pointing posture during swings, though pistol-grip variants appeared in higher grades for improved control in select applications. Choke options included full, modified, or bores, allowing users to adapt the pattern density for different game sizes and distances, such as tighter full chokes for longer-range waterfowl shots or open bores for close-quarters flushing. In the civilian market, the excelled in upland bird scenarios, where its 20-gauge chambering delivered manageable and effective loads for species like pheasants and quail over moderate ranges. Hunters appreciated its reliable cycling with 2¾-inch shells and four-shot tubular magazine, which supported quick follow-up shots in dynamic field conditions without excessive weight.

Model 17R

The Remington Model 17R, introduced in 1926 as the variant of the Model 17, featured a 20-inch barrel designed for enhanced maneuverability in close-quarters tactical scenarios. This shortened adaptation of the base design prioritized handling for applications, with an overall length of approximately 39 inches and an unloaded weight of about 5.25 pounds. The 17R utilized a bore to deliver a wider shot pattern suitable for , maintaining the pump-action mechanism and a four-round tubular magazine capacity (five rounds including the chamber). Production of the Model 17R riot variants occurred alongside standard models from until the overall Model 17 line ended in 1933, contributing to the total of approximately 73,000 units manufactured across all grades.

Model 17P

The Model 17P, known as the variant, further modified the design for extreme close-range use, incorporating a 14.5-inch barrel, a stock without a spur (in later examples), and a bore. This version included a simple front sight and an overall reduced to 25.5 inches, with an unloaded of 4.5 pounds, while retaining the five-round capacity for rapid engagement. The design emphasized durability through a simplified finish on metal components, minimizing ornate engravings or bluing to withstand harsh operational conditions. Exact figures for the 17P remain undocumented, though estimates suggest only several hundred were produced due to its niche tactical role.

Users

Law Enforcement

The New York Police Department (NYPD) was among the first agencies to adopt the Remington Model 17 Special Police Gun in the mid-1920s, valuing its compact design for undercover operations and concealment under clothing or within newspapers during urban patrols. This variant, featuring a 14.5-inch barrel and 5-shot capacity, allowed officers to maneuver effectively in confined spaces such as stairwells or vehicles, addressing the need for discreet yet potent firepower amid rising Prohibition-era crime in the 1920s. The also procured the Model 17 Gun for urban patrol duties, incorporating small batches into their arsenal to enhance officer response in densely populated areas during the late and early . Similarly, the favored the for its reliability in close-quarters engagements, reflecting broader trends driven by policies aimed at equipping forces against and labor unrest prevalent in industrial cities at the time. Overall production of the variant totaled an estimated several hundred units, supplied in limited quantities tailored to departmental orders, often with interchangeable pistol-grip and shoulder stocks for operational flexibility. In 1926, Remington introduced the Model 17R Riot Gun—a 20-gauge configuration priced at $46.95—to capitalize on police demand for riot-control weapons, leading to modest adoptions by various departments seeking alternatives to longer-barreled riot guns. These procurements were influenced by interwar policies emphasizing lightweight, maneuverable shotguns for crowd control and anti-gang operations, though total law enforcement issuances remained small-scale compared to standard sporting models. Military interest in the Model 17 during the was limited, with no evidence of major contracts or widespread adoption by U.S. armed forces, as the design primarily targeted and police markets.

Civilian and Other

The Remington Model 17 gained popularity among hunters in the early , particularly for pursuing small game such as rabbits and squirrels, as well as upland birds like pheasants and . Its lightweight construction in 20-gauge, weighing around 6 pounds, made it ideal for extended walks in the field without fatigue, allowing for quick handling during fast-flushing game. Hunters appreciated its reliable pump-action mechanism, which provided smooth cycling for follow-up shots in dynamic hunting scenarios. In rural areas during the and , the Model 17 also found use in home defense, where its compact size and five-round capacity offered practical protection against intruders or wildlife threats without the bulk of larger gauges. The configurations, with 26- or 28-inch barrels, suited these close-range applications in farmhouses and isolated homesteads. Today, the Remington Model 17 is highly collectible among firearm enthusiasts due to its scarcity—only about 73,000 were produced between 1921 and 1933—and its status as an early pump-action design by John Browning. Well-preserved examples in standard grades typically sell for $300 to $600 as of 2025, while rare Premier grades with fine engraving and high-grade walnut can fetch significantly higher prices at auction. No significant international civilian sales or exports are documented for the model, which remained primarily a domestic sporting arm. For modern enthusiasts, original parts remain available through specialty suppliers, enabling restoration and maintenance of surviving examples, though no full reproductions have been produced.

Legacy

The Remington Model 17 represented the company's final bottom-ejecting pump-action design, with its production ceasing in 1933 as Remington shifted focus to side-ejecting models like the Model 12 and Model 31. The innovative bottom-ejection system and slide-action mechanism from John Browning's 1915 patent influenced several subsequent pump shotguns. After the patent expired, the adapted the design for the Model 37, introduced in 1937, which was scaled up to include 12 gauge and featured refinements for broader appeal; over 2 million units were produced by 2003, making it one of the longest-running American pump shotguns. Similarly, incorporated elements of the design into the BPS pump shotgun, launched in 1977, which also employs bottom ejection and remains in production. Due to its limited production run of approximately 73,000 units and status as an early collaboration with Remington, the Model 17 has garnered interest among collectors. As of 2025, well-preserved examples in very good to excellent condition typically sell for $300 to $600.

References

  1. https://www.remarms.com/firearm-history/model-17
  2. https://smallarmsreview.com/the-remington-model-17/
  3. https://www.nramuseum.org/guns/the-galleries/world-war-i-and-firearms-innovation/case-36-great-inventors/remington-model-17-slide-action-shotgun.aspx
  4. https://remingtonsociety.org/model_17/
  5. https://funarg.nfshost.com/r2/notes/browning-patents.html
  6. https://www.browning.com/support/historic-timeline.html
  7. http://archive.smallarmsreview.com/display.article.cfm?idarticles=1538
  8. https://www.shotgunworld.com/threads/the-remington-17.295053/
  9. https://www.rockislandauction.com/riac-blog/browning-shotguns-for-sale
  10. https://www.justanswer.com/firearms/848ui-remington-model-17-7207-full-left.html
  11. https://www.remingtonsociety.org/forums/viewtopic.php?t=22930
  12. https://www.doublegunshop.com/forums/ubbthreads.php?ubb=showflat&Number=26405
  13. https://www.americanrifleman.org/content/a-look-back-at-the-ithaca-model-37-shotgun/
  14. https://www.remingtonsociety.org/model_17/
  15. https://archive.smallarmsreview.com/display.article.cfm?idarticles=1538
  16. https://www.outdoorlife.com/guns/history-bottom-eject-shotguns/
  17. https://www.facebook.com/NRAmuseums/photos/gun-of-the-day-remington-model-17-shotgunwhile-our-gotd-was-only-offered-in-20-g/1076940975698215/
  18. https://www.tiropratico.com/manuali-pdf/2015-R/Remington%2017.pdf
  19. https://collections.cmrussell.org/remington-model-17-slide-action-shotgun/
  20. https://firearmland.com/item/1123010664
  21. https://bluebookofgunvalues.com/products/remington-model-17a
  22. https://www.shotgunworld.com/threads/model-17-remington-20ga-mod.584330/
  23. https://www.pheasantsforever.org/BlogLanding/Blogs/Field-Notes/This-is-My-Classic-Shotgun-Remington-Model-17-Pump.aspx
  24. https://www.nodakoutdoors.com/threads/does-anybody-shoot-a-remington-model-17-or-model-31.6104/
  25. https://www.wildfowlmag.com/editorial/a-remington-to-remember/280095
  26. https://www.webuyguns.com/valuations/remington/model-17
  27. https://truegunvalue.com/shotgun/remington-17/price-historical-value
  28. https://www.shotgunworld.com/threads/remington-model-17-questions.513146/
  29. https://oldarmsofidaho.com/product-category/shotgun-parts/remington-shotgun-parts/remington-model-17-parts/
  30. https://gatdaily.com/articles/the-ithaca-37-an-american-icon/
  31. https://www.pewpewtactical.com/ithaca-model-37-review/
  32. https://www.browning.com/news/articles/shotguns/celebrating-40-years-bps-pump-action-shotgun.html
  33. https://www.fieldandstream.com/outdoor-gear/guns/shotguns/browning-bps-shotgun-review
Add your contribution
Related Hubs
User Avatar
No comments yet.