Recent from talks
Nothing was collected or created yet.
Roundup Ready
View on WikipediaThis article needs additional citations for verification. (September 2025) |

Roundup Ready is the Bayer (formerly Monsanto) trademark for its patented line of genetically modified crop seeds that are resistant to its glyphosate-based herbicide, Roundup. The products have become so commonplace that trademark is occasionally used eponymously for any genetically modified herbicide resistance, regardless of actual product.
History
[edit]In 1996, genetically modified Roundup Ready soybeans resistant to Roundup became commercially available, followed by Roundup Ready corn in 1998.[1] Current Roundup Ready crops include soy, corn (maize), canola,[2] sugar beets,[3] cotton, and alfalfa,[4] with wheat[5] still under development. Additional information on Roundup Ready crops is available on the GM Crops List.[6] As of 2005, 87% of U.S. soybean fields were planted with glyphosate resistant varieties.[7][8]
However, the use of Roundup Ready or glyphosate resistant seeds has led to the development of glyphosate resistant weeds. [9] Although the number of glyphosate resistant weeds is low, the number of glyphosate resistant weed species is quickly growing, thus posing concerns for farmers who have relied on Roundup Ready seeds for weed control. [10]
In 2016, as a response to the growth of glyphosate resistant weeds, Monsanto introduced Roundup Ready Xtend soybeans, modified to tolerate both dicamba and glyphosate. Xtend soybeans were planted on 1 million acres in 2016, and by 2020 were projected to be planted on 50 million acres.[11]
While the use of Roundup Ready crops has increased the usage of herbicides measured in pounds applied per acre,[12] it has also changed the herbicide use profile away from atrazine, metribuzin, and alachlor[citation needed] which are more likely to be present in run off water.[citation needed] Furthermore, because glyphosate can be sprayed directly on Roundup Ready crops during the growing season, farmers using these seeds are less likely to intensively till and spray their fields in the off-season, thus reducing soil erosion and labor costs, and increasing soil moisture.[13]
An injunction in the case of Center for Food Safety v. USDA in September, 2010 prevented farmers from planting Roundup Ready sugar beets across the United States until a remedial environmental impact report could be filed, prompting some fear of a sugar shortage.[14] The USDA completed an environmental impact study of Roundup Ready sugar beets in 2012 and concluded that they are safe, at which time they were deregulated.[15]
Patents
[edit]The US patent for Roundup Ready soybeans expired in 2014.[16] The US patent for Roundup Ready canola expired on 26 April 2022.[17] The 2020 film Percy is based on Canadian farmer Percy Schmeiser's legal battle against Monsanto over the Roundup Ready canola patent.[17]
Genetic engineering
[edit]Some microorganisms have a version of 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS: EC 2.5.1.19, 3-phosphoshikimate 1-carboxyvinyltransferase; 5-enolpyruvylshikimate-3-phosphate synthetase; phosphoenolpyruvate:3-phosphoshikimate 5-O-(1-carboxyvinyl)-transferase) that is resistant to glyphosate inhibition. The version used in genetically modified crops was isolated from Agrobacterium strain CP4 (CP4 EPSPS) that was resistant to glyphosate.[18][19] The CP4 EPSPS gene was cloned and inserted into soybeans. The CP4 EPSPS gene was engineered for plant expression by fusing the 5' end of the gene to a chloroplast transit peptide derived from the petunia EPSPS. This transit peptide was used because it had shown previously an ability to deliver bacterial EPSPS to the chloroplasts of other plants. The plasmid used to move the gene into soybeans was PV-GMGTO4. It contained three bacterial genes, two CP4 EPSPS genes, and a gene encoding beta-glucuronidase (GUS) from Escherichia coli as a marker. The DNA was injected into the soybeans using the particle-acceleration method or "gene gun". Soybean cultivar A54O3 was used for the transformation. The expression of the GUS gene was used as the initial evidence of transformation. GUS expression was detected by a staining method in which the GUS enzyme converts a substrate into a blue precipitate. Those plants that showed GUS expression were then taken and sprayed with glyphosate and their tolerance was tested over many generations.
Productivity claims
[edit]Under special conditions meant to reveal only genetic yield factors, RR lines actually have worse yields. In 1999, a review of Roundup Ready soybean crops found that, compared to the top conventional varieties, they had a 6.7% lower yield.[12] This so called "yield drag" follows the same pattern observed when other traits are introduced into soybeans by conventional breeding.[20] Monsanto claims later patented varieties yield 7-11% higher than their poorly performing initial varieties, closer to those of conventional farming, although the company refrains from citing actual yields.[21] Monsanto's 2006 application to USDA states that RR2 (mon89788) yields 1.6 bu less than A3244, the conventional variety that the trait is inserted into.[22]
Many genetically engineered crops have similar yield alterations due to one or both of the common causes for this. Roundup Ready crops have both: Yield drag due to the modification itself interfering with yield production; and yield lag due to the delay in breeding the best new yield genetics into the RR lines.[23]
Because this kind of testing is done under artificial conditions, these results do not hold for actual field conditions with weed pressure.[23] Under realistic field use the weed control advantages are more significant.
See also
[edit]References
[edit]- ^ "Monsanto Company History". Monsanto.com. 2008-11-03. Archived from the original on 2008-04-23. Retrieved 2010-08-22.
- ^ "Monsanto Genuity Roundup Ready canola trait". Genuity.com. 2008-11-03. Retrieved 2010-08-22. [dead link]
- ^ "Monsanto Genuity Roundup Ready sugarbeets trait". Genuity.com. 2008-11-03. Retrieved 2010-08-22. [dead link]
- ^ ISSAA GM database approval entry for alfalfa event MON-00101
- ^ ISAAA GM approval database entry for wheat event MON71800
- ^ International Service for the Acquisition of Agri-Biotech Applications - GM Crop List
- ^ USDA/APHIS Environmental Assessment — In response to Monsanto Petition 06-178-01p seeking a Determination of Non-regulated Status for Roundup Ready 2 Yield Soybean MON 89788, OECD Unique Identifier MON-89788-1, U.S. Department of Agriculture Animal and Plant Health Inspection Service + Biotechnology Regulatory Services page 13 [1]
- ^ National Agriculture Statistics Service (2005) in Acreage eds. Johanns, M. & Wiyatt, S. D. 6 30, (U.S. Dept. of Agriculture, Washington, DC).
- ^ https://crops.extension.iastate.edu/encyclopedia/status-and-concerns-glyphosate-resistance
- ^ https://www.extension.purdue.edu/extmedia/gwc/gwc-1.pdf
- ^ Polansek, Tom; Nickel, Rod (4 March 2020). "Bayer's top seed faces U.S. soybean challenge from Corteva". Reuters. Retrieved 19 August 2020.
- ^ a b Charles Benbrook. Evidence of the Magnitude and Consequences of the Roundup Ready Soybean Yield Drag from University-Based Varietal Trials in 1998. Ag BioTech InfoNet Technical Paper Number 1
- ^ https://ag.purdue.edu/btny/purdueweedscience/wp-content/uploads/2021/03/Roundup-Ready-Crops-Have-Major-Positive-Impact-on-Tilllage-Practices.pdf
- ^ "Sugar Beet Beatdown: Engineered Varieties Banned". NPR.org.
- ^ "USDA APHIS | USDA Announces Final Environmental Impact Statement and Plant Pest Risk Assessment for Genetically Engineered Sugar Beets". Archived from the original on 2020-06-12. Retrieved 2020-06-12.
- ^ "Monsanto Will Let Bio-Crop Patents Expire". Business Week. January 21, 2010. Archived from the original on January 27, 2010. Retrieved 25 January 2010.
- ^ a b Pratt, Sean (14 October 2021). "Roundup Ready canola patent set to expire". The Western Producer. Retrieved 26 November 2021.
- ^ Development and Characterization of a CP4 EPSPS-Based, Glyphosate-Tolerant Corn Event,G. R. Heck et al. Crop Sci. 45:329-339 (2005).[2] Archived 2009-03-19 at the Wayback Machine
- ^ Molecular basis for the herbicide resistance of Roundup Ready crops, T. Funke et al., PNAS 2006 103:13010-13015 [3]
- ^ Caviness, Charles E.; Walters, H.J. (1971). "Effect of phytophthora rot on yield and chemical composition of soybean seed". Crop Science. 11 (1). Madison, Wisconsin: ACSESS: 83–84. doi:10.2135/cropsci1971.0011183X001100010029x.
- ^ "Roundup Ready 2 Yield® Soybeans | Bayer Traits". Bayer CropScience.
- ^ "Microsoft Word - RR2Y USDA Revised 11.03.06a.doc" (PDF). Retrieved August 22, 2010.
- ^ a b Gurian-Sherman, Douglas (April 2009). Failure To Yield - Evaluating the Performance of Genetically Engineered Crops (PDF). Union of Concerned Scientists. S2CID 6332194.
Roundup Ready
View on GrokipediaDevelopment and History
Invention and Early Research
The invention of Roundup Ready technology stemmed from Monsanto's pursuit of crops tolerant to glyphosate, the broad-spectrum herbicide commercialized as Roundup in 1974 following its discovery by chemist John E. Franz in 1970.[8][9] Glyphosate inhibits the plant enzyme 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS), essential for aromatic amino acid synthesis, leading to weed death but also limiting its use to pre-planting or non-crop areas.[10] To enable in-crop application, Monsanto researchers initiated screening programs in the early 1980s for glyphosate-insensitive EPSPS variants from soil microbes, identifying tolerant strains through selection on media containing the herbicide as a phosphorus source.[10] A key breakthrough occurred with the isolation of the cp4 epsps gene from Agrobacterium sp. strain CP4, a naturally occurring soil bacterium exhibiting high glyphosate tolerance due to its robust EPSPS enzyme kinetics, which bind the herbicide with lower affinity while maintaining catalytic efficiency.[11][12] This gene, encoding a Class II EPSPS, was cloned by Monsanto scientists and demonstrated functionality in microbial expression systems, producing enzyme levels sufficient to confer resistance without requiring overexpression.[12] Early experiments confirmed the cp4 epsps protein's tolerance stemmed from structural differences, including proline substitutions at key sites, allowing substrate binding despite glyphosate presence.[10] Initial plant transformation efforts focused on model species like tobacco and petunia in the late 1980s, where Agrobacterium-mediated insertion of the cp4 epsps gene into the nuclear genome yielded stable, heritable glyphosate resistance, verified by restored growth on selective media and biochemical assays showing elevated EPSPS activity.[13] These proof-of-concept studies paved the way for agronomic crops, with Monsanto filing patents for the CP4 EPSPS enzyme and its applications, such as U.S. Patent 5,633,435 granted in 1997 (filed 1992), establishing the molecular foundation for commercial Roundup Ready varieties.[12] Field trials of transformed soybeans began around 1991, confirming efficacy against weeds without crop injury.[14]Commercial Launch and Expansion
Monsanto commercially launched Roundup Ready soybeans in the United States in 1996, representing the first major introduction of glyphosate-tolerant genetically engineered crops to the market.[15] This followed regulatory approvals and limited field trials, with the soybeans engineered to express a bacterial enzyme conferring resistance to glyphosate, allowing post-emergence herbicide application without crop damage.[16] Expansion occurred swiftly thereafter, with Roundup Ready canola first planted commercially in Canada in 1996 on about 50,000 acres.[17] Roundup Ready cotton entered commercial production in the U.S. in 1997, adopted on over 800,000 acres in its initial year, providing growers with simplified weed control in cotton fields.[18] Roundup Ready corn followed in 1998, extending the technology to a key staple crop and further integrating glyphosate resistance into mainstream agriculture.[19] Monsanto facilitated this growth through licensing agreements with seed companies such as Asgrow and Pioneer, established in the early 1990s, which accelerated trait integration into diverse germplasm and varieties.[19] By the early 2000s, the Roundup Ready system had been incorporated into alfalfa, sugar beets, and other crops, solidifying its role in global herbicide-tolerant crop production.[19]Genetic Engineering and Mechanism
Molecular Basis of Glyphosate Resistance
Glyphosate exerts its herbicidal action by competitively inhibiting the enzyme 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS), which catalyzes the penultimate step in the shikimate pathway responsible for synthesizing the aromatic amino acids phenylalanine, tyrosine, and tryptophan in plants and microorganisms.[20] This pathway is absent in animals, making EPSPS a selective target. Inhibition occurs through formation of a dead-end ternary complex involving EPSPS, shikimate-3-phosphate (S3P), and glyphosate, where glyphosate mimics the substrate phosphoenolpyruvate (PEP) and binds in an extended conformation at the active site, preventing the transfer of the enolpyruvyl moiety from PEP to S3P.[20] Plant EPSPS enzymes typically exhibit high sensitivity to glyphosate, with inhibition constants (Ki) in the range of 0.4–1 μM, leading to accumulation of pathway intermediates like shikimic acid and cessation of amino acid production, ultimately causing plant death.[21] Roundup Ready crops achieve glyphosate resistance through transgenic expression of the cp4 epsps gene derived from Agrobacterium sp. strain CP4, encoding the CP4 EPSPS enzyme.[22] This bacterial enzyme maintains catalytic function in the presence of glyphosate concentrations that fully inhibit native plant EPSPS, allowing continued shikimate pathway activity and crop survival. The tolerance stems from kinetic and structural properties that reduce glyphosate's inhibitory efficacy: CP4 EPSPS displays a Ki of 6 mM and IC50 of 11 mM for glyphosate—over 10,000-fold higher than typical plant enzymes—while retaining favorable substrate affinities, such as a Km for PEP of approximately 15 μM.[22][23] At the structural level, crystal structures of CP4 EPSPS (resolved at 1.7–2.1 Å) reveal that glyphosate adopts a condensed, non-productive conformation upon binding, rather than the extended inhibitory pose seen in plant EPSPS.[22] This is primarily due to a key alanine residue at position 100 (Ala-100), which introduces steric hindrance clashing with glyphosate's phosphonate group and Glu-354 in the active site, destabilizing the inhibitory complex.[22] Site-directed mutagenesis substituting Ala-100 with glycine (the residue in sensitive plant EPSPS) restores glyphosate sensitivity, reducing IC50 to 160 μM and enabling extended binding, confirming Ala-100's causal role.[22] The enzyme also undergoes cation-dependent conformational shifts (e.g., influenced by K+ with a dissociation constant of 25 mM), optimizing activity in planta without compromising tolerance.[21] These features collectively ensure robust resistance without reliance on gene amplification or other non-target mechanisms observed in evolved weed resistance.[22]Integration into Crop Genomes
The cp4 epsps gene, isolated from Agrobacterium sp. strain CP4, encodes a glyphosate-tolerant form of the 5-enolpyruvylshikimate-3-phosphate synthase enzyme, which is integrated into the nuclear genome of Roundup Ready crops to enable selective herbicide application without damaging the host plant.[24] This integration typically involves a single copy of the gene cassette, including promoter, coding sequence, and terminator elements (such as the 35S promoter from cauliflower mosaic virus and nopaline synthase terminator), resulting in stable, heritable expression following Mendelian inheritance patterns.[25] The process ensures the transgene is flanked by vector backbone sequences in some events, but functionality relies on precise insertion without disrupting essential host genes.[11] Transformation methods vary by crop species to optimize integration efficiency and regeneration. In soybeans, Agrobacterium tumefaciens-mediated delivery is commonly employed, where disarmed strains harboring the binary vector infect cotyledon or hypocotyl explants, facilitating T-DNA transfer and random chromosomal insertion; this yielded the original GTS 40-3-2 event approved in 1994.[26] For corn, particle bombardment (biolistics) predominates, as in the GA21 line, where gold particles coated with plasmid DNA (e.g., PV-ZMGT32L) are accelerated into embryogenic callus cells, promoting direct DNA uptake and integration, often with a maize-optimized EPSPS variant under ubiquitin promoter control.[25] Cotton varieties, such as MON 531, utilize Agrobacterium-mediated transformation of meristematic tissues or embryogenic calli, achieving integration sites characterized by Southern blot analysis to confirm copy number and absence of backbone contamination.[27] Post-integration, selectable markers like the native cp4 epsps itself enable glyphosate-based selection during tissue culture, with regenerated plants screened via PCR or Southern hybridization for stable insertion events.[28] In events like NK603 maize, a single locus insertion into chromosome 6 ensures predictable segregation, while junction sequences at insertion sites have been mapped using techniques such as thermal asymmetric interlaced PCR to verify intactness and lack of unintended rearrangements.[29] Expression levels vary by tissue and genotype due to positional effects at the insertion locus, but efficacy is validated through field trials confirming glyphosate tolerance thresholds exceeding 10-fold over wild-type crops.[11] These methods have been refined since the 1980s, with regulatory dossiers documenting low off-target mutation rates comparable to conventional breeding-induced variations.[30]Adoption and Market Penetration
Global Adoption Rates
Glyphosate-tolerant crops, including those developed under the Roundup Ready trademark, have seen extensive global deployment, primarily in soybeans, corn, cotton, and canola, where they enable post-emergence herbicide application for weed control. As of 2024, the worldwide area planted to biotech crops reached 209.8 million hectares across 28 countries, with herbicide tolerance traits—overwhelmingly conferring glyphosate resistance—incorporated into the majority of these plantings, often in combination with insect resistance.[31] This represents a continuation of trends where such traits have driven GM crop expansion, particularly in the Americas and parts of Asia.[32] In the United States, adoption rates for glyphosate-tolerant varieties remain near saturation for principal crops: 94% of soybean acreage, approximately 90% of corn, and 93% of cotton in 2024.[33] Brazil, the second-largest adopter, plants glyphosate-tolerant soybeans on virtually all of its GM soybean area, which expanded significantly in recent years, contributing to over 50 million hectares of total GM crops nationally.[34] Argentina mirrors this pattern, with glyphosate tolerance dominant in soybeans (exceeding 95% of GM plantings) and increasingly in corn, supporting around 24 million hectares of GM crops.[35] Canada exhibits high adoption of Roundup Ready canola, occupying over 90% of canola acreage, alongside substantial use in corn and soybeans. In Paraguay, the entire GM soybean crop—comprising the bulk of agricultural land—is planted with glyphosate-tolerant varieties. Adoption in Asia is concentrated in cotton, where India and China plant Bt varieties often stacked with glyphosate tolerance on tens of millions of hectares combined, though soybean and corn uptake lags due to regulatory hurdles. South Africa and Australia also report adoption rates above 80% for key GM crops like corn and cotton.[34][36]| Country/Region | Key Crop | Adoption Rate (Glyphosate-Tolerant, ~2023-2024) | Source |
|---|---|---|---|
| United States | Soybeans | 94% | [33] |
| United States | Corn | ~90% | [33] |
| United States | Cotton | 93% | [33] |
| Brazil | Soybeans | Nearly 100% of GM area | [34] |
| Argentina | Soybeans | >95% of GM area | [35] |
| Paraguay | Soybeans | 100% | [34] |
| Canada | Canola | >90% | [32] |
Crop Varieties and Applications
The primary Roundup Ready crop varieties, genetically modified to express the CP4 EPSPS enzyme conferring glyphosate tolerance, include soybeans, corn, cotton, canola, alfalfa, and sugar beets, with soybeans introduced first in 1996 followed by canola in 1997, cotton and corn in subsequent years, alfalfa in 2005, and sugar beets in 2009.[19][37][38] These varieties enable post-emergence application of glyphosate herbicides, such as Roundup, directly over growing crops to control a broad spectrum of weeds without crop injury, thereby supporting no-till or reduced-tillage practices that minimize soil erosion.[39][40] In soybeans, Roundup Ready traits (e.g., event GTS 40-3-2) dominate U.S. planting, with over 90% of acreage utilizing herbicide-tolerant varieties by the mid-2010s, applied in row-crop systems for weed management in high-yield environments like the Midwest.[41][42] Corn varieties, such as Roundup Ready Corn 2 (event NK603), are stacked with insect resistance traits and used in grain, silage, and seed production, allowing glyphosate sprays timed to corn growth stages for control of grasses and broadleaf weeds.[43][44] Cotton Roundup Ready lines (e.g., event MON 88913) facilitate weed control in fiber production across the U.S. South, integrating with defoliation practices prior to harvest.[45] Canola Roundup Ready varieties (e.g., event RT73) are applied in oilseed farming primarily in Canada and the northern U.S., where glyphosate aids in volunteer canola and broadleaf weed suppression during the crop's short growing season.[19] Alfalfa, via events like MON 00101, supports multiple hay cuttings with selective weed removal, reducing labor in forage systems while preserving stand longevity.[38][46] Sugar beets with Roundup Ready traits (e.g., event H7-1) are utilized in root crop rotations for sucrose production, enabling effective control of weeds like kochia that compete during establishment.[45] Across these applications, the technology has been integrated into hybrid breeding programs, often combined with other traits, but requires resistance management to sustain efficacy against evolving weed populations.[47][48]Agronomic and Economic Benefits
Yield Improvements and Productivity Data
Empirical studies indicate that Roundup Ready (glyphosate-tolerant, or GT) crops do not inherently possess higher yield potential than comparable conventional varieties under controlled conditions with effective weed management in both systems.[49][50] For instance, 1999 variety trials across eight U.S. northern states found Roundup Ready soybeans yielding 97% of conventional counterparts on average, with the gap narrowing from 4% in 1998 as the trait integrated into higher-performing germplasm.[49] Similarly, Ohio State University field trials reported no significant yield differences between Roundup Ready and conventional soybeans when weeds were adequately controlled conventionally.[50] However, at the farm level, adoption of Roundup Ready technology has contributed to yield improvements primarily through superior weed control, reducing competition and yield losses that often occur with less effective conventional herbicide programs.[51] A comprehensive analysis of global farm impacts from 1996 to 2016 attributed additional soybean production of 213 million tonnes to GT traits, with yield gains ranging from 5% to 11% in the U.S. and Canada for second-generation varieties, and up to 13% to 31% in regions like Romania where baseline weed pressure was higher.[51] These effects stem indirectly from the flexibility of glyphosate application, enabling timely and comprehensive weed suppression without crop injury, which preserves yield potential more consistently than multi-herbicide conventional systems. For corn and cotton, similar patterns emerge, with GT varieties delivering yield uplifts of 1% to 15% in corn (e.g., 5% to 15% in the Philippines) and 1.6% to 20% in cotton (e.g., 3% to 20% in Mexico), translating to 405 million additional tonnes of corn and 27 million tonnes of cotton globally over the same period.[51] A 2014 meta-analysis of 147 studies corroborated positive yield effects for herbicide-tolerant GM crops, estimating overall GM adoption (including GT) increased yields by 22% on average, though gains for GT were modestly lower than for insect-resistant traits due to the indirect mechanism via weed management rather than physiological enhancements.[52] Regional variations highlight greater benefits in developing countries, where conventional weed control limitations amplify the relative advantage.[52] Productivity gains extend beyond raw yields to include enhanced overall farm output through integration with conservation practices. Roundup Ready adoption facilitated no-till and reduced-tillage systems, which minimize soil erosion and improve water retention, contributing to sustained yield stability and long-term productivity increases of several bushels per acre in U.S. corn and soybean rotations.[51] In 2016 alone, GT soybean technology added 32 million tonnes to global production, underscoring its role in scaling output amid rising demand.[51]| Crop | Typical Yield Gain Range (HT Traits) | Key Regions/Notes | Additional Global Production (1996–2016, million tonnes) |
|---|---|---|---|
| Soybeans | 5–31% | U.S./Canada: 5–11%; Higher in high-weed areas | 213 |
| Corn | 1–15% | Indirect via weed control | 405 |
| Cotton | 1.6–20% | Varies by baseline management | 27 |