Hubbry Logo
Boss (engineering)Boss (engineering)Main
Open search
Boss (engineering)
Community hub
Boss (engineering)
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Boss (engineering)
Boss (engineering)
Boss (engineering)
View on Wikipedia
from Wikipedia
Two bosses in the form of cylinders on a mechanical part. The cylinder to the right is filleted near its base.

In engineering, a boss is a protruding feature on a workpiece.[1] A common use for a boss is to locate one object within a pocket or hole of another object. For instance, some motors use a precisely machined boss on the front face to locate it on the mating part. Like a process on a bone, bosses on castings can provide attachment points or bearing surfaces.[2]

The term 'boss' when used in engineering can also relate to a finishing edge around (usually) a circular opening that allows the opening to locate onto, or within another opening thus locating or joining two items together with a view to the location or joining being temporary or semi-permanent. A common everyday example of a boss is the housing of the rotation spindle in a washing machine drum, or on a cylinder lawn mower at the end of the cutting blade cylinder which may house a bearing set to allow the cylinder to rotate through one plane, but held firm in another plane.

A boss can also be a brass eyelet on a sail. It is a generic term to describe an item designed to facilitate the use with, within, on or around another item whereby one cannot operate properly without the other.

The word 'boss' is also often used to describe the end of a shaft on a boat to which a propeller might attach.

A boss may also refer to a mounting feature that will receive a screw or thread-forming screw.[3]

In computer-aided design applications, a boss is a feature used to describe a type of extrusion.

The word boss comes from the Middle French word embocer, which means protuberance.

Docking sleeve

[edit]

A docking sleeve (or mounting boss) is a tube or enclosure used to couple two mechanical components together, or for chilling, or to retain two components together; this permits two equally sized appendages to be connected via insertion and fixing within the construction. Docking sleeves may be physically solid or flexible, their implementation varying widely according to the required application of the device. The most common application is the plastic appendage that receives a screw in order to attach two parts.

See also

[edit]
  • Mortise and tenon, traditional method for connecting two pieces of wood
  • Chamfer, a transitional straight edge between two faces of an object
  • Fillet, a rounding of an interior or exterior corner between two faces of an object
  • Draft, the amount of taper for molded or cast parts perpendicular to the parting line

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Boss (engineering)

View on Grokipedia
from Grokipedia
In engineering, a boss is a protruding feature on a workpiece, often cylindrical or rib-like, designed to facilitate the attachment of fasteners, such as screws or threaded inserts, or to align mating components within a or . These features are integral to mechanical assemblies, providing and precise positioning without compromising the overall integrity of the part. Bosses are commonly employed in plastic injection molding, , and die-casting processes, where they serve as mounting points for hardware or reinforcement elements in components like housings, enclosures, and automotive parts. In plastic designs, bosses help register mating parts and accommodate self-tapping screws or press-fit inserts, enhancing assembly efficiency. For instance, in , bosses often hold bearings, bushings, or shafts, ensuring stability in rotating mechanisms. Key design guidelines for bosses emphasize maintaining proportional dimensions to avoid defects like sinking, cracking, or high stresses during manufacturing and use. The wall thickness of a boss should typically be 40-60% of the nominal part wall to minimize cooling-induced voids in plastics, while the outer diameter is ideally 2.5 times the screw diameter for optimal torque resistance in self-tapping applications. Strengthening elements, such as gussets at the base or connecting ribs, are recommended for taller or load-bearing bosses, and draft angles of 0.5-3 degrees aid in mold ejection. Hoop stresses from insert interference must be calculated to prevent failure, with maximum insertion forces determined by material properties and geometry.

Definition and Characteristics

Definition

In engineering, a boss is a protruding feature on the surface of a workpiece, typically cylindrical, conical, or rectangular in form, that enhances the functionality of components by enabling mounting, fastening, or alignment. These features are integral to mechanical design, providing localized reinforcement and precise interfacing between parts. The most common is cylindrical, though conical shapes aid in insertion or alignment, and rectangular protrusions offer versatility for specific load-bearing or attachment needs. The primary purposes of a boss include locating one object within a pocket or hole of another for accurate assembly, providing a bearing surface to distribute loads and reduce wear, and serving as a passage for fasteners such as screws or bolts to secure components. By concentrating material in these protrusions, bosses improve structural integrity without excessively thickening the overall part. Heights and diameters of bosses are scaled relative to the base material thickness—often limited to no more than three times the outer diameter—to maintain balance between strength and manufacturability.

Key Characteristics

Bosses in engineering are distinguished by their geometric properties, which balance strength, material efficiency, and compatibility with fastening elements. The of a boss is typically 1.5 to 2 times the diameter, ensuring adequate surrounding material to distribute loads without compromising the part's integrity. Similarly, the height is limited to 2 to 3 times the boss to minimize stress concentrations that could propagate cracks or deformation under load. Surface features further define boss functionality, with interiors often designed as smooth bores for clearance fits or threaded for direct engagement with screws. In molded constructions, draft angles of 1 to 2 degrees are applied to vertical walls to facilitate demolding while maintaining dimensional accuracy. Tolerance standards vary based on application demands; precision bosses require tight alignments to ensure reliable in high-accuracy assemblies, whereas functional bosses permit looser tolerances to optimize costs without sacrificing basic performance. Effective integration with the base is crucial, requiring bosses to transition smoothly to avoid or fracture points. This is commonly achieved through fillets at the boss base, with radii equal to about half the thickness of adjacent walls or , which mitigate stress risers and improve overall structural resilience.

Types of Bosses

Machined Bosses

Machined bosses are protruding features, typically cylindrical or raised areas, formed on a workpiece through subtractive processes that remove from a solid stock. These processes primarily include milling, turning, and , often executed using computer (CNC) machines to achieve precise geometries from materials such as aluminum, , or . The fabrication begins with a CAD model defining the boss dimensions, followed by securing the workpiece in a fixture, rough to establish the basic shape, and finishing operations like boring or to refine the feature. This method ensures high accuracy in protrusion height, diameter, and alignment, making it suitable for components requiring robust attachment points. Key advantages of machined bosses lie in their superior precision and for demanding applications. They deliver excellent surface finishes, typically ranging from Ra 0.8 to 1.6 µm, which minimizes stress concentrations and enhances fatigue resistance under high loads. Tight dimensional tolerances, often within ±0.05 mm, support reliable mating with fasteners or other components, while the compatibility with metals like allows for use in environments exposed to extreme temperatures or . These attributes make machined bosses ideal for low-to-medium production volumes where quality outweighs cost efficiency. Common configurations of machined bosses include threaded variants, which incorporate internal or external threads for secure bolt insertion, and those with flanged bases that provide additional stability against shear forces. In automotive applications, threaded machined bosses are integrated into blocks to mount sensors, injectors, or accessories, ensuring vibration-resistant connections. Similarly, in fittings, flanged bosses reinforce structural joints in turbine housings or components, contributing to overall assembly integrity. These designs are tailored via CNC techniques to meet specific functional needs without requiring secondary operations. Despite their precision, machined bosses have notable limitations, including higher material waste from subtractive removal and elevated production costs due to labor-intensive setup and tooling. They are less economical for high-volume runs compared to formative methods, as each part requires individual cycles, potentially increasing lead times for large batches. Additionally, achieving uniform features on complex geometries can demand advanced fixturing to prevent deformation.

Molded Bosses

Molded bosses are protruding features formed during formative manufacturing processes, such as injection molding or die casting, where molten material—typically plastics, composites, or metals—is injected into a mold cavity containing core pins or inserts that create the raised cylindrical or tubular structures. These bosses serve as integral mounting points or alignment aids, enabling efficient assembly without secondary operations, and are particularly suited for high-volume production due to the mold's ability to replicate complex geometries in a single cycle. In injection molding, thermoplastic resins are forced under pressure into the mold, solidifying around the protruding features to form bosses with wall thicknesses often maintained at 40-60% of the surrounding nominal wall to ensure uniform cooling and minimize defects. Similarly, in die casting, molten metals like aluminum or zinc fill the cavity, allowing bosses to be integrated into metal components for structural applications. The primary advantages of molded bosses lie in their cost-effectiveness for , where per-unit expenses decrease significantly at volumes exceeding thousands of parts, as the tooling investment is amortized over large runs. They facilitate seamless integration with intricate part s, such as thin-walled enclosures (typically 1-2 thick), enhancing overall part strength and reducing assembly time by embedding fastening features directly into the molded structure. This approach contrasts with post-molding additions, offering superior material flow and bonding in composites via processes like resin transfer molding, though it demands precise mold to avoid flow disruptions. Common configurations include bosses reinforced with circumferential ribs or gussets to improve torsional grip and prevent cracking under load, often seen in housings like cases where bosses secure internal components. bosses, featuring tapered or barbed profiles, enable tool-free assembly and are prevalent in medical devices such as barrels or diagnostic equipment casings, providing reliable retention without additional hardware. In die-cast applications, bosses with central holes maintain uniform wall thicknesses of 60-80% of the adjacent sections, supporting threaded inserts for automotive or appliance mounts. Despite these benefits, molded bosses are susceptible to manufacturing limitations, including sink marks or internal voids when wall thicknesses exceed 3 mm, as uneven cooling leads to shrinkage in thicker sections. Demolding requires draft angles of 0.5° to 3° on vertical surfaces to facilitate ejection without damaging the part, and excessive boss height relative to (e.g., over 2:1 ) can trap air or cause incomplete filling in the mold cavity.

Specialized Bosses

Specialized bosses represent adaptations of the basic boss design to meet unique functional requirements in targeted contexts, such as enhanced conductivity in or structural reinforcement in heavy-duty components. Gusseted bosses incorporate triangular or radial supports attached to the base of the protrusion, significantly enhancing torsional and axial load capacity without substantially increasing material volume. These reinforcements distribute stress more evenly across the surrounding structure, preventing deformation under high mechanical loads. They are particularly employed in load-bearing applications, such as machinery housings and components, where standard bosses might fail prematurely. The gussets are typically integrated during molding or to form a unified, robust feature that maintains part integrity in dynamic environments. Blind bosses feature a closed-end configuration, lacking a through-hole or opening at the distal end, which makes them ideal for applications requiring , sealing, or a flush . This design prevents fluid ingress or debris accumulation, contributing to and longevity in exposed assemblies. They are used in components to preserve aerodynamic integrity and seamless appearance. The closed structure also supports aesthetic uniformity in visible components without compromising attachment functionality. Representative examples of specialized bosses include threaded inserts embedded within molded bosses to create metal-plastic hybrid structures, enabling robust fastening in thermoplastic parts that would otherwise lack sufficient thread strength. These inserts are placed during the molding process to achieve strong mechanical bonds, accommodating screws in applications demanding high torque retention, such as automotive interiors. Another example is alignment bosses in robotic assemblies, which serve as precision guides to ensure accurate part orientation during automated mating operations, reducing misalignment errors in high-volume production lines. In electronics, these specialized forms support critical connectivity, as explored further in related applications.

Applications

Mechanical Fastening and Assembly

In mechanical fastening and assembly, bosses serve as protruding features on components that provide threaded or clearance holes for screws, bolts, or rivets, enabling secure and reliable joining of parts. These elements are designed to withstand various loads, including tension and torsion, while promoting even distribution of fastening forces to prevent localized stress concentrations. By incorporating such mounting points, bosses facilitate alignment during assembly, reducing the likelihood of binding or misalignment in multi-component systems. A key benefit of bosses in assembly is their ability to integrate fastening features directly into the primary part, thereby reducing overall part count and simplifying workflows. This approach enhances distribution across the , allowing for consistent preload without compromising integrity—for example, tightening torques for M4 plastic screws in polyamide 6.6 bosses are recommended at 0.25 Nm to achieve optimal clamping while avoiding stripping. Such integration supports faster assembly times and improves the durability of connections in load-bearing applications. Practical examples of bosses in mechanical fastening include their use in automotive dashboards, where they provide retention points for screws to secure panels and , ensuring vibration-resistant assemblies. Similarly, in furniture frames, bosses accommodate bolts for modular joints, allowing for straightforward and potential disassembly without specialized tools. These applications highlight bosses' role in promoting efficient, scalable fastening in everyday mechanical systems. To ensure effective assembly, boss design incorporates precise tolerances, such as wall thicknesses at approximately 60% of the nominal part wall and minimum draft angles of 0.5 degrees, which aid in alignment and prevent defects like sink marks. Positional tolerances for bosses are maintained tightly in precision assemblies to avoid interference in mating parts, though exact values depend on the manufacturing process and material. Machined bosses, in particular, offer enhanced precision for demanding fastening needs.

Electronics and Circuitry

In electronic components, bosses serve as critical alignment and insertion features for printed circuit boards (PCBs), particularly in connector systems where precise positioning is essential for maintaining . For instance, in PCB mount headers and receptacles, bosses act as locators to ensure accurate placement during assembly, preventing misalignment that could disrupt electrical connections. These features, often integrated into connector designs, facilitate the docking of edge connectors by guiding insertion points and maintaining precise pitch tolerances, which is vital for high-speed without or loss. Within enclosures, bosses enable secure mounting of PCBs and displays, typically molded as protrusions with integrated standoffs to provide electrical and mechanical isolation from the . These standoffs elevate the board to prevent short circuits and allow space for airflow or component clearance, enhancing reliability in compact assemblies. Molded directly into housings during injection processes, such bosses align with PCB mounting holes for or attachment, simplifying assembly while isolating sensitive circuitry from conductive walls. Representative examples illustrate bosses' versatility in . In smartphones, molded bosses within the secure camera modules, ensuring precise alignment for optical and resistance during attachment via screws or adhesives. Similarly, in server racks, bosses integrated into enclosures support PCB mounting and facilitate by providing anchor points for ties or routing clips, optimizing airflow and organization in high-density setups. Electrically, bosses are predominantly non-conductive, fabricated from insulators like or to prevent unintended current paths and protect against in PCB assemblies. However, conductive variants, often incorporating metal inserts or threading, establish grounding paths by linking the PCB to the , aiding in suppression and compliance. This duality allows designers to tailor bosses for isolation in signal-sensitive areas or conductivity where bonding is required.

Structural Reinforcement

Bosses function as localized thickenings in components, providing reinforcement by distributing applied loads more evenly across the base structure and minimizing stress concentrations that could lead to deformation or . This mechanism enhances the rigidity of the overall part, particularly in areas subjected to tensile, compressive, or forces. Additionally, bosses can incorporate gussets or at their base to bolster shear resistance, where gussets act as triangular supports to tie the boss to adjacent walls, thereby improving load transfer and preventing localized shear . In pressure vessels, such as Type IV composite cylinders, bosses are integral for maintaining structural integrity under high internal pressures, with finite element analysis showing peak von Mises stresses in the boss reaching up to 311.4 MPa—well under the material's tensile strength—while preventing liner deformation at operating pressures up to 52 MPa. These reinforcements are also employed in hydraulic manifolds to support load-bearing ports and fluid pathways, ensuring stability during pressure cycles, and in aircraft fuselages to fortify attachment points against aerodynamic and vibrational loads. Boss placement is strategically determined using finite element analysis (FEA) to target high-stress regions, such as transition zones between the liner and composite overwrap in pressure vessels, allowing for optimized geometry that reduces peak stresses by adjusting features like flange radii and groove positions. By alleviating stress concentrations and enhancing load distribution, structural bosses extend component lifespan in cyclic loading environments, as the reduced peak stresses delay fatigue initiation and propagation, particularly in applications like pressure vessels subjected to repeated pressurization.

Design Considerations

Dimensional Guidelines

Dimensional guidelines for bosses in engineering design emphasize proportional relationships that balance structural integrity, material flow, and manufacturability across applications. A fundamental sizing rule is to set the boss outer diameter at 2 to 2.5 times the diameter, providing adequate material support to withstand insertion and forces without cracking or deformation. This proportion ensures the boss walls remain robust while minimizing material use. For bosses, the height is generally limited to less than 3 times the outer diameter to mitigate warping from differential cooling rates. Material-specific considerations further refine these proportions to address unique processing challenges. In plastics, boss walls are typically 40-60% of the nominal part wall thickness to prevent sink marks caused by uneven shrinkage during solidification. Metals permit taller bosses relative to wall thickness due to their higher thermal conductivity and lack of shrinkage-induced defects, allowing greater design flexibility in machined or cast components; for example, in aluminum die-casting, boss or rib heights up to 4 times the wall thickness are feasible. Proportion standards enhance these guidelines by incorporating stress-relief features. A fillet radius at the boss base equal to 0.25 to 0.5 times the wall thickness reduces stress concentrations and improves flow during molding. For flush fastening, the depth should be sufficient to accommodate the head without protruding, ensuring a smooth assembly surface while maintaining engagement length. To ensure precision and interchangeability, boss designs must comply with established standards such as ISO 2768 for general dimensional tolerances in fits and assemblies, which specifies permissible deviations based on size ranges. For precision applications requiring tight geometric control, adherence to provides comprehensive rules for dimensioning and tolerancing, including form and position tolerances critical for boss alignment and functionality.

Stress and Failure Analysis

In engineering bosses, particularly those in plastic components, the protruding geometry often leads to stress concentrations at the base, especially around sharp fillets or junctions with the parent material. These hotspots arise from abrupt changes in section, amplifying local stresses under load and potentially initiating cracks or deformation. For instance, in injection-molded parts, inadequate radii at the boss-wall interface can increase stress by factors of 2-3 compared to filleted designs, as abrupt geometry interrupts uniform stress flow. For cylindrical bosses subjected to radial or torsional loads, such as from insertion, hoop stress develops circumferentially in the wall. Stress levels in unreinforced thermoplastics under typical assembly torques can approach significant portions of the 's yield strength. Common modes in bosses include shear tear-out, particularly in designs integrated into thin walls, where the critical load is given by F=2LtτF = 2 L t \tau, with LL as the edge distance from the boss to the wall edge, tt the wall thickness, and τ\tau the 's . This mode occurs when lateral forces exceed the shear capacity of the surrounding , leading to ejection around the boss base, as seen in overloaded applications. In tall, slender bosses under compressive loads, represents another key , governed by formula Pcr=π2EI(KL)2P_{cr} = \frac{\pi^2 E I}{ (K L)^2 }, where EE is the modulus of elasticity, II the , LL the boss height, and KK the effective length factor; bosses exceeding a height-to-diameter ratio of 2.5 are particularly susceptible, resulting in sudden lateral deflection and collapse. To evaluate boss performance, finite element analysis (FEA) is widely employed, simulating stress distributions under 10-100x nominal loads to identify concentrations and predict deformation, often incorporating anisotropic material models for fiber-reinforced plastics. Complementary empirical testing, such as per ASTM D638 for tensile properties, validates FEA by measuring ultimate strengths and elongation at break, ensuring bosses withstand service conditions without exceeding 50% of material limits. Mitigation strategies focus on geometric enhancements, such as adding connecting or gussets to distribute loads and reduce concentrations, or increasing base thickness to bolster shear resistance. Incorporating safety factors of 2-4 for dynamic or impact loads further prevents , aligning with dimensional guidelines to maintain boss height below 2-3 times the diameter. These approaches, when combined, extend boss lifespan in applications like housings by minimizing crack propagation risks.

Manufacturing Processes

Machining Techniques

Machining techniques for creating bosses in primarily involve subtractive processes such as end milling and turning, which remove material from a workpiece to form raised protrusions with high precision. End milling, often using carbide tools for roughing operations, employs feed rates typically ranging from 0.05-0.15 mm per tooth, adjusted for material (higher for aluminum, lower for ), to efficiently shape the boss contour while minimizing . For cylindrical bosses, turning on lathes is preferred, with spindle speeds typically ranging from 1000 to 2000 RPM depending on workpiece and material to achieve smooth surfaces and accurate dimensions. The step-by-step process begins with face milling the base surface to ensure flatness and stability, followed by boring or to form the boss protrusion. If required for fastening, internal threading is added using taps for metric applications in mechanical assemblies. The process concludes with deburring the edges to remove sharp remnants and improve safety and functionality. Tool selection depends on the workpiece material; (HSS) tools are suitable for soft metals like aluminum due to their toughness and cost-effectiveness. is essential during operations to lubricate the tool-workpiece interface and prevent heat distortion, maintaining temperatures below 100°C to preserve dimensional accuracy. ensures the machined boss meets precision requirements through (CMM) inspection for concentricity, targeting tolerances under 0.02 mm to verify alignment with the base. [Surface roughness](/page/Surface roughness) is measured using profilometers, typically aiming for Ra values of 1.6-3.2 µm to confirm smooth finishes that support assembly and performance.

Molding and Casting Methods

In injection molding, bosses are formed using core pins inserted into the mold cavity to create the internal voids or holes within the protruding features. These core pins define the precise inner diameter and ensure the boss maintains structural integrity during the high-volume production process. Gate placement should be positioned to promote uniform material fill and avoid defects like flow lines or weld marks on critical features such as bosses. Die casting employs high-pressure injection, typically ranging from 10 to 175 MPa, to produce metal bosses with fine details and minimal . Venting channels are incorporated in the mold to allow trapped gases to escape, reducing defects such as voids or incomplete fills during the rapid metal flow. The formative process for both methods follows key steps: first, the mold is designed with a 1-2° draft on boss walls to facilitate ejection without damaging the part; second, molten —plastics at 180-250°C or metals at higher temperatures—is injected into the cavity; third, the part cools under controlled conditions to solidify; and fourth, the component is ejected followed by any necessary post-processing like trimming excess . Cycle times for injection-molded parts generally range from 15 to 60 seconds, enabling efficient high-volume output. Challenges in these methods include warping, which is minimized through uniform cooling channels in the mold to ensure even distribution across the boss and surrounding areas, and shrinkage, particularly 1-2% in thermoplastics, which is compensated by oversizing mold dimensions accordingly.

References

  1. https://www.efunda.com/designstandards/plastic_design/boss.cfm
  2. https://www.engineering.com/building-better-bosses-2/
  3. https://www.engineersedge.com/hardware/self_tapping_screws_installation_design_9998.htm
  4. https://rapidaxis.com/blog/what-is-a-boss-in-engineering-understanding-its-role/
  5. https://tonzamaking.com/blog/easy_konwing/whats-a-boss-in-machining/
  6. https://semarakilmu.com.my/journals/index.php/appl_mech/article/download/4872/3606
  7. https://aslcore.org/engineering/entries/?id=boss
  8. https://h-inet.org/common-mechanical-engineering-terms/
  9. https://www.richconn-cnc.com/machined-boss.html
  10. https://www.rapiddirect.com/blog/screw-boss-design-injection-molding/
  11. https://mpe.researchmfg.com/how-come-the-screw-boss-crack-after-mold-in-screw-insert/
  12. https://www.swcpu.com/blog/plastic-part-design-guideline/
  13. https://www.protolabs.com/resources/blog/injection-molding-tolerances/
  14. https://www.distrupol.com/General_Design_Principles_for_Engineering_Polymers.pdf
  15. https://www.xavier-parts.com/what-is-boss-machining-a-comprehensive-guide/
  16. https://www.komacut.com/blog/guide-to-cnc-machining-surface-roughness/
  17. https://www.sandvik.coromant.com/en-gb/industry-solutions/aerospace/aerospace-engine
  18. https://www.protolabs.com/resources/design-tips/plastic-boss-design-on-molded-parts/
  19. https://www.sunrise-metal.com/die-casting-bosses/
  20. https://xcentricmold.com/better-plastic-parts-design-with-bosses/
  21. https://www.studiored.com/blog/eng/injection-molded-part-design-part-3-bosses/
  22. https://www.diecastingdesign.org/bosses/
  23. https://www.azom.com/article.aspx?ArticleID=10665
  24. https://www.rtpcompany.com/technical-info/molding-guidelines/bosses-gussets/
  25. https://www.protolabs.com/resources/design-tips/design-stronger-molded-parts/
  26. https://www.pemnet.com/products-overview/products-threaded-inserts/threaded-inserts-molded-in-inserts/
  27. https://www.researchgate.net/publication/280114960_Passive_Alignment_Principle_for_Robotic_Assembly_between_a_Ring_and_a_Shaft_with_Extremely_Narrow_Clearance
  28. https://www.vem-tooling.com/screw-boss-design/
  29. https://www.bossard.com/us-en/assembly-technology-expert/technical-information-and-tools/technical-information/preload-and-tightening-torques/tightening-torques-for-plastic-screws--polyamide-66/
  30. https://www.te.com/en/product-2-292141-2.html
  31. https://resources.altium.com/p/enhancing-signal-integrity-in-pcb-design-key-considerations-and-strategies
  32. https://www.polycase.com/techtalk/pcb-screws/how-to-mount-pcb-in-enclosure.html
  33. https://www.essentracomponents.com/en-us/news/solutions/pcb-electronics/a-guide-to-pcb-standoffs
  34. https://www.terminal-block-derks.com/blog/how-to-install-a-camera-module-in-a-pcb-enclosure-box-for-electronic-136036.html
  35. https://www.racksolutions.com/rack-accessories/cable-management
  36. https://www.essentracomponents.com/en-us/news/solutions/pcb-electronics/the-ultimate-guide-to-pcb-hardware
  37. https://www.polycase.com/techtalk/electronics-tips/grounding-and-bonding-101-what-device-designers-need-to-know.html
  38. https://www.protolabs.com/resources/blog/design-better-screw-bosses-on-molded-parts/
  39. https://www.mdpi.com/2071-1050/16/12/5098
  40. https://www.sciencedirect.com/science/article/abs/pii/S0360319925039369
  41. https://xcentricmold.com/designing-for-plastics/
  42. https://www.protolabs.com/resources/design-tips/improving-part-design-with-uniform-wall-thickness/
  43. https://vormetal.com/2025/05/21/designing-bosses-ribs-in-aluminum-die-castings/
  44. https://www.fictiv.com/articles/wall-thickness-recommendations-for-injection-molding
  45. https://www.plasticmoulds.net/designing-bosses-for-injection-molding-a-complete-guide.html
  46. https://grabcad.com/tutorials/helpful-injection-molding-design-guidelines
  47. https://www.fictiv.com/articles/stress-concentrations-how-to-identify-and-reduce-them-in-your-designs
  48. https://dfmpro.com/blog/10-simple-design-guidelines-one-follow-effective-design-boss-features-plastic-parts/
  49. https://www.engineeringtoolbox.com/stress-thin-walled-tube-d_948.html
  50. https://www.plasticstoday.com/injection-molding/why-is-fea-of-plastic-parts-so-often-wrong-
  51. https://www.cnccookbook.com/feeds-speeds/
  52. https://littlemachineshop.com/reference/cuttingspeeds.php
  53. https://tormach.com/articles/coolant-cutting-tools-choose-right-system-job
  54. https://www.sciencedirect.com/science/article/pii/S2090447922001411
  55. https://tirapid.com/cnc-machining-manufacturer-with-0-02mm-concentricity-guarantee/
  56. https://www.protolabs.com/resources/design-tips/fine-tuning-tolerances-for-cnc-machined-parts/
  57. https://www.ptonline.com/articles/how-to-form-a-hole-with-a-core-pin-part-1
  58. https://xometry.pro/en/articles/die-casting-overview/
  59. https://www.protolabs.com/resources/blog/the-advantages-and-disadvantages-of-injection-molding/
  60. https://www.xometry.com/resources/injection-molding/introduction-to-injection-molding-tolerances/
Add your contribution
Related Hubs
User Avatar
No comments yet.