Community hub
0 subscribers7 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to Scale ruler.
Nothing was collected or created yet.
Scale ruler
View on Wikipediafrom Wikipedia
 | This article needs additional citations for verification. (August 2023) |
A scale ruler is a tool for measuring lengths and transferring measurements at a fixed ratio of length; two common examples are an architect's scale and engineer's scale. In scientific and engineering terminology, a device to measure linear distance and create proportional linear measurements is called a scale. A device for drawing straight lines is a straight edge or ruler. In common usage, both are referred to as a ruler.
Architect's scale
[edit]
An architect's scale is a specialized ruler designed to facilitate the drafting and measuring of architectural drawings, such as floor plans and Multi-view orthographic projections.
Because the scale of such drawings is often smaller than life-size, an architect's scale features multiple units of length and proportional length increments.[1]
For accuracy and longevity, the material used should be dimensionally stable and durable. Scales were traditionally made of wood, but today they are usually made of rigid plastic or aluminum.
United States and Imperial units
[edit]In the United States, and prior to metrication in Britain, Canada and Australasia, architect's scales are marked as a ratio of x inches-to-the-foot (typically written as x″=1′-0″). For example, one inch measured from a drawing with a scale of "one-inch-to-the-foot" is equivalent to one foot in the real world (a scale of 1:12)....one inch measured from a drawing with a scale of "two-inches-to-the-foot" is equivalent to six inches in the real world (a scale of 1:6). It is not to be confused with a true unitless ratio. A 1:5 architectural scale (inches to feet) would be a 1:60 unitless scale (inches to inches) since there are 60 inches in 5 feet.
Typical scales used in the United States are:[1]
- full scale, with inches, divided into sixteenths of an inch
The following scales are generally grouped in pairs using the same dual-numbered index line (one scale is read from the right, and the other scale is read from the left):
three-inches-to-the-foot (3″=1′-0″) (ratio equivalent 1:4) one-and-one-half-inch-to-the-foot (1+1⁄2″=1′-0″) (1:8) one-inch-to-the-foot (1″=1′-0″) (1:12) one-half-inch-to-the-foot (1⁄2″=1′-0″) (1:24) three-quarters-inch-to-the-foot (3⁄4″=1′-0″) (1:16) three-eighths-inch-to-the-foot (3⁄8″=1′-0″) (1:32) one-quarter-inch-to-the-foot (1⁄4″=1′-0″) (1:48) one-eighth-inch-to-the-foot (1⁄8″=1′-0″) (1:96) three-sixteenths-inch-to-the-foot (3⁄16″=1′-0″) (1:64) three-thirty-seconds-inch-to-the-foot (3⁄32″=1′0″) (1:128)
Metric units
[edit] |
Architect's scale rulers used in Britain and other metric countries are marked with ratios without reference to a base unit. Therefore, a drawing will indicate both its scale (ratio) and the unit of measurement being used.
In Britain, and elsewhere, the standard units used on architectural drawings are the (SI) units millimetres (mm) and metres (m), whereas in France centimetres (cm) and metres are most often used.
In Britain, for flat rulers, the paired scales often found on architect's scales are:
- 1:1/1:10
- 1:5/1:50
- 1:10/1:100
- 1:20/1:200
- 1:1250/1:2500
For triangular rulers, the paired scales are:
- 1:1/1:10
- 1:2/1:20
- 1:5/1:50
- 1:100/1:200
- 1:500/1:1000
- 1:1250/1:2500
Less common scales are:
- 1:25/1:250
- 1:331⁄3
- 2:1
In France, in engineering departments or architectural offices, here are some scales used :
- 1:100 / 1:300
- 1:200 / 1:400
- 1:250 / 1:500
Engineer's scale
[edit]
An engineer's scale is a tool for measuring distances and transferring measurements at a fixed ratio of length. It is commonly made of plastic or aluminum and is just over 300 millimetres (12 in) long, but with the only 300 mm of markings, leaving the ends unmarked so that the first and last measuring ticks do not wear off. It is used in making engineering drawings, commonly called blueprints, blue lines, or plans on a specific scale. For example, "one-tenth size" would appear on a drawing to indicate a part larger than the drawing on the paper itself. It is not to be used to measure machined parts to see if they meet specifications.
In the United States this scale is divided into decimalized fractions of an inch but has a cross-section like an equilateral triangle, which enables the scale to have six edges indexed for measurement. One edge is divided into tenths of an inch, and the subsequent ones are directly marked for twentieths, thirtieths, fortieths, fiftieths, and finally sixtieths of an inch. Referred to as 1:10, 1:20, 1:30,1:40, 1:50 or 1:60 scale.[2] Typically in civil engineering applications, 1:10 (1″=10′) is used exclusively for detail drawings. 1:20 and 1:40 scales are used for working plans. 1:60 is normally used only to show large areas of a project.
In 1918 French described the US engineer's scale using the term "civil engineers' scale", and it was said to be "used for plotting and map drawing, and the graphic solution of problems."[3]
See also
[edit]References
[edit]- ^ a b Giesecke, Frederick E.; Mitchell, Alva; Spencer, Henry Ceicil; Hill, Ivan Leroy; Dygdon, John Thomas; Novak, James E.; Lockhart, Shawna (1997). Technical drawing (10th ed.). Upper Saddle River, NJ: Prentice Hall. pp. 62–64. ISBN 978-0-13-461971-2.
- ^ Ghilani, Charles D. (2018). Elementary Surveying: An introduction to Geomantics (15th ed.). New York: Pearson. p. 466. ISBN 9780134604657.
- ^ French, Thomas E. (1918). A Manual of Engineering Drawing for Students and Draftsmen (2nd ed.). New York: McGraww-Hill. p. 9.
External links
[edit]Scale ruler
View on Grokipediafrom Grokipedia
A scale ruler, also known as an architect's scale or engineer's scale, is a specialized measuring instrument designed for technical fields such as architecture, engineering, and drafting, featuring multiple graduated edges calibrated to different proportional ratios for accurately interpreting and transferring dimensions on scaled drawings and blueprints.[1][2] Unlike a standard ruler that measures actual lengths, a scale ruler enables users to convert measurements between real-world sizes and their representations at reduced or enlarged scales, such as 1:100 (where 1 unit on the drawing equals 100 units in reality) or 1/4 inch = 1 foot.[3] Typically triangular in shape with three faces, it is constructed from durable materials like aluminum, plastic, or historically boxwood, and includes laser-etched or engraved markings for precision in professional applications.[4]
The tool's utility lies in its ability to facilitate the creation and reading of plans, sections, elevations, and models without manual calculations, making it indispensable for professionals converting drawn dimensions to actual sizes or vice versa—for instance, a 36 mm line on a 1:100 scale drawing represents 3.6 meters in reality.[2] Common scales vary by discipline: architectural rulers often feature ratios like 1/8" = 1', 1/4" = 1', 3/8" = 1', and 1" = 1' for building designs, while engineer scales include 1" = 10', 20', 30', 50', or 60' for civil projects such as roads and infrastructure.[3] Available in imperial (feet and inches) or metric (millimeters, centimeters, meters) units, scale rulers are essential in fields from urban planning to mechanical design.[1][4]
Introduction
Definition and Basic Function
A scale ruler is a specialized measuring tool used to measure lengths and transfer dimensions at fixed proportional ratios, commonly employed in technical drawing to convert between scaled representations and real-world sizes. It is typically constructed as a triangular prism or flat strip, with markings that allow for precise interpretation of drawings without additional computation.[5][6] The core function of a scale ruler involves applying predefined ratios to scale measurements, such as 1:50 in metric systems or 1/8" = 1'-0" in imperial units, enabling users to determine actual dimensions from a drawing or vice versa. This conversion relies on the principle that the actual length equals the measured drawing length multiplied by the scale factor, where the scale factor is the reciprocal of the ratio (e.g., for 1:50, the factor is 50). By aligning the ruler's zero with a starting point on the drawing and reading the endpoint along the appropriate scale, users obtain directly proportional values.[3][7] Essential components include finely graduated markings in inches, feet, or metric units, distributed across multiple edges or faces to provide various scales on a single tool. These rulers are usually 12 inches (30 cm) long, balancing portability with sufficient length for accurate readings in drafting tasks.[5][8]Importance in Technical Drawing
In technical drawing, scale rulers play a crucial role in enabling the accurate proportioning of plans, elevations, and sections by allowing draftsmen to represent real-world dimensions at reduced or enlarged ratios on paper. This precision ensures that structural elements, such as building facades or site layouts, are depicted proportionally without distortion, which is vital for conveying design intent effectively. By facilitating direct measurement in scaled units—such as 1/8 inch equaling 1 foot for architectural details—scale rulers minimize scaling discrepancies that could otherwise propagate into construction phases.[9][10] The use of scale rulers significantly benefits drafting workflows by speeding up the transfer of measurements compared to manual calculations or conversions, providing a quick method to interpret object sizes on drawings. This efficiency is particularly valuable in time-sensitive projects like infrastructure planning, where rapid yet reliable dimensioning supports iterative design revisions. Furthermore, scale rulers promote consistency across collaborative efforts by standardizing interpretations of drawing ratios, ensuring that team members—from engineers to contractors—reference the same proportional framework, which reduces miscommunications in multi-disciplinary teams.[3][9] Scale rulers are essential for compliance with building codes and engineering standards that mandate precise representations, as inaccuracies in scaled drawings can lead to non-conforming structures and regulatory violations. Their precision helps prevent errors in scaling that might result in costly construction mistakes, such as misaligned components or oversized foundations, by enforcing exact dimensional fidelity during the planning stage. In contrast to standard rulers, which operate at a 1:1 full-scale ratio suitable only for actual-size measurements, scale rulers directly handle reductions and enlargements, eliminating the need for auxiliary tools like calculators in traditional analog drafting processes.[3][10][9]Historical Development
Pre-20th Century Origins
The origins of the scale ruler trace back to the Renaissance period, where proportional dividers served as key precursors for achieving accurate scaling in perspective drawing and human proportions. German artist Albrecht Dürer, in his 1525 treatise Underweysung der Messung mit dem Zirckel und Richtscheyt (Instructions for Measuring with Compass and Ruler), described the use of refined dividers to transfer measurements at fixed ratios, influencing subsequent developments in artistic and architectural drafting.[11] By the 17th and 18th centuries, these concepts evolved alongside advancements in surveying and cartography, leading to the emergence of dedicated scaled rules that allowed for direct measurement on reduced-scale representations.[12] Early forms of scale rulers were typically single-scale instruments made from durable materials such as brass, ivory, or wood, designed for practical use in cartography and architecture. A notable 18th-century example is a brass drafting rule, possibly crafted by English maker John Shearson, featuring three plotting scales of 5 inches, 2-3/4 inches, and 3 inches, along with diagonal scales divided at 1/10-inch, 1/20-inch, 1/40-inch, and 1/30-inch increments for precise fractional measurements.[13] Ivory variants, such as a late 18th-century scale rule produced by Dollond of London, were often included in pocket sets of drawing instruments and engraved with inch scales on both sides for portability in fieldwork.[14] In the American context, Benjamin Rittenhouse of Pennsylvania crafted brass rules between 1785 and 1796 that incorporated architect's scales divided into 45 to 15 parts per inch, adapting surveyor's tools for scaled mapping and building plans.[13] These early rulers emphasized simplicity, with markings suited to local standards like the ell—a common European length measure from elbow to fingertip—facilitating the transfer of field measurements to paper.[12] The adoption of scale rulers accelerated during the Industrial Revolution in the late 18th and early 19th centuries, as the demand for detailed mechanical drawings in manufacturing and engineering grew. This period saw their integration into technical workflows for representing machinery and structures at reduced scales, bridging artisanal practices with emerging industrial precision.[13] By the mid-19th century, innovations in multi-scale designs appeared, exemplified by English maker J. Rabone & Sons' circa 1850 folding ivory rule with 18 scales, which allowed users to switch between ratios without multiple tools.[15] In Europe and America, the first patents for advanced multi-scale versions emerged around this time; for instance, American inventor Josiah Lyman received U.S. Patent 38,904 in 1863 for a triangular German silver drafting scale with edges divided to 1/40 inch and numbered from 3 to 24, enabling versatile ratio measurements on a single compact form.[16] These developments marked a shift from ad-hoc adaptations of surveyor's rods to specialized instruments tailored for the complexities of industrial-era drafting.Modern Standardization
The 20th century marked a significant shift in scale ruler production, with mass manufacturing techniques enabling widespread availability. Materials evolved from traditional boxwood to more durable and cost-effective options like aluminum and rigid plastic, improving longevity and precision for professional use.[17] Standardization efforts gained momentum through organizations like the American National Standards Institute (ANSI), which developed guidelines for engineering and architectural drawings, including consistent scale ratios and designations via standards such as ASME Y14.100. Internationally, the International Organization for Standardization (ISO) formalized recommended scales for technical drawings in ISO 5455 (1979), promoting uniform ratios like 1:1, 1:2, 1:5, 1:10, 1:20, 1:50, 1:100, 1:200, 1:500, 1:1000, 2:1, 5:1, 10:1, 20:1, 50:1, and 100:1 across engineering fields. These standards addressed variations between imperial (e.g., 1/4" = 1'-0") and metric systems, with ANSI/ASME focusing on U.S. practices and ISO emphasizing global interoperability.[18][19] Key milestones included the formalization of the International System of Units (SI) in 1960 by the General Conference on Weights and Measures, which spurred metric adoption in architectural and engineering scales worldwide during the mid-20th century, replacing imperial units in many regions. Triangular scale rulers, offering multiple scales on six edges for efficiency, had originated in the 19th century but became staples in professional kits by the early 20th century.[20][16] Since the 2000s, computer-aided design (CAD) software has profoundly influenced scale ruler usage by automating drafting and scaling, diminishing the need for manual physical tools in initial design phases. However, physical scale rulers persist for verifying printed plans and hybrid workflows, where they complement digital outputs; as of 2025, their role endures in fieldwork and quality checks despite CAD dominance. Global differences remain evident, with ISO standards prevailing in metric-dominant countries and ANSI in imperial contexts like the U.S., though CAD has bridged some gaps through universal digital scaling.[21][22]Architect's Scale
Scales in Imperial Units
In imperial units, architect's scales are expressed as ratios where a specified fraction or number of inches on the drawing represents one foot in real life, facilitating precise representations in building design. These scales are particularly suited for architectural drawings in contexts where imperial measurements prevail, such as in the United States. Common ratios include 1/8" = 1'-0", used primarily for site plans and preliminary floor plans to capture larger areas without excessive drawing size; 1/4" = 1'-0", ideal for detailed floor plans, elevations, and sections where moderate reduction is needed; 3/8" = 1'-0", applied in building sections for intermediate detail levels; 1/2" = 1'-0", employed for construction details and wall sections requiring greater enlargement; 3/4" = 1'-0", utilized in enlarged details like millwork or fixtures; 1" = 1'-0", for close-up construction details; and 1-1/2" = 1'-0", for highly detailed elements such as ornamental features or full-scale components.[23] These scales are typically marked with graduations in feet and inches along the edges of the ruler, allowing users to directly read measurements in architectural units rather than arbitrary divisions. A standard architect's scale ruler is triangular in shape, featuring six scales in total—two per face—to provide versatility for different drawing requirements without needing multiple tools.[24] The conversion from drawing measurements to real-world distances follows the scale ratio, where the real distance in feet equals the drawing distance in inches divided by the scale's inch-per-foot value (e.g., for 1/4" = 1'-0", divide by 0.25). This approach ensures accurate scaling tailored to imperial-based building design, contrasting with decimal-based metric equivalents covered elsewhere.[25]Scales in Metric Units
In the metric system, architect's scale rulers are designed to represent dimensions using ratios based on the International System of Units (SI), which gained prominence in architectural drafting following the system's formal adoption by the General Conference on Weights and Measures in 1960.[26] These scales facilitate the translation of real-world structures into proportional drawings, with markings typically calibrated in millimeters (mm) for fine measurements and meters (m) for larger spans, ensuring compatibility with SI conventions.[20] Common metric ratios for architectural plans include 1:20, 1:50, 1:100, 1:200, and 1:500, allowing designers to depict site plans, floor layouts, and elevations at appropriate levels of detail without excessive enlargement or reduction. For construction details and sections, larger ratios such as 1:10 and 1:5 are employed to highlight elements like wall assemblies or fixtures, where greater precision is required. These ratios are etched or engraved along the ruler's edges, with each scale subdivided into increments of 1 mm or 10 mm to align with standard drafting practices.[20] Metric architect's scale rulers are commonly configured with four or more scales on a single tool, often in a triangular cross-section for stability and multi-face access, or a flat four-bevel design for portability; this setup enables quick switching between ratios during drafting.[27] To determine actual dimensions from a metric drawing, the conversion equation is: Actual length (m) = [Drawing length (mm) × scale ratio] / 1000. For instance, a 50 mm line on a 1:200 scale represents 10 m in reality (50 × 200 / 1000 = 10), providing a straightforward method to verify proportions against SI-based building codes.[20]Engineer's Scale
Full and Reduced Scales
In engineer's scale rulers, the full scale configuration of 1 inch = 1 inch is utilized for detailed views in civil and mechanical engineering drawings, allowing precise representation of smaller components or sections without reduction.[28] Reduced scales, such as 1 inch = 10 feet, 1 inch = 20 feet, 1 inch = 30 feet, 1 inch = 40 feet, 1 inch = 50 feet, and 1 inch = 60 feet, are applied to depict large-scale infrastructure like roadways and utilities, compressing extensive real-world dimensions onto standard drawing sheets.[3] These ratios enable engineers to maintain proportional accuracy while managing the practical constraints of paper size and readability.[29] The markings on an engineer's scale ruler feature decimal divisions for clarity in imperial units, with one edge often graduated in decimal feet (divided into tenths or twentieths) and another in inches to facilitate quick conversions.[28] Typically constructed as a triangular body, these rulers incorporate multiple scales—often up to 10 across the six edges—for comprehensive use in various drawing scenarios.[30] Unlike architect's scales, which rely on fractional divisions like 1/4 inch = 1 foot, engineer's scales emphasize decimal progressions for engineering precision.[3] Engineer's scale rulers with these configurations are specifically designed for site plans and topographical drawings, where accurate scaling of terrain, boundaries, and linear features is essential.[3] To determine actual dimensions from a drawing, the equation is: For instance, in the 1 inch = 10 feet scale, the multiplier is 10, so a measured drawing length of 5 inches corresponds to 50 feet in reality.[29] This method ensures consistent interpretation across engineering documents.[28]Usage in Different Fields
In civil engineering, engineer's scales are essential for laying out highways and pipelines, where scales such as 1 inch = 50 feet allow precise representation of large infrastructure elements on plans.[31] These tools facilitate accurate measurement of road alignments and utility routes, such as water mains, ensuring alignment with site conditions and regulatory requirements.[3] In mechanical engineering, engineer's scales are adapted for creating assembly drawings of machine parts, supporting enlargements and reductions to detail components like gears or housings relative to full assemblies.[28] This application enables engineers to verify fit and function in technical illustrations, bridging conceptual designs with fabrication tolerances. Surveyors employ engineer's scales to transfer field measurements onto plats, particularly for depicting terrain contours that influence drainage and grading.[3] Unlike architect's scales, which focus on building footprints, engineer's scales handle expansive topographical data, allowing representation of elevation changes and natural features at ratios suited to site analysis.[10] Engineer's scales remain preferred in U.S. public works projects for their compatibility with infrastructure documentation, such as roadway and utility planning.[3] As of 2025, engineering scales from drawings can be converted for use in GIS software, such as relating 1 inch = 40 feet to a 1:4800 map scale in ArcGIS, supporting integration into digital geospatial models.[32]Manufacturing and Materials
Traditional Construction
Traditional scale rulers were primarily constructed from durable hardwoods such as boxwood (Buxus sempervirens) and pear wood, selected for their dimensional stability, fine grain, and resistance to warping, which facilitated precise scale markings.[13][33] Ivory was also used in early examples for its smooth, non-porous surface ideal for detailed engravings, but its application in rulers and similar tools was largely discontinued in the early 20th century due to shifts to more affordable materials, with the 1989 CITES international ban on ivory trade further restricting any potential use.[34] Brass served as an early metal material in some precision scale rulers, particularly for engraving scales owing to its malleability and corrosion resistance. The manufacturing process for these wooden rulers typically began with selecting and seasoning straight-grained lumber, which was then cut into triangular cross-sections to allow multiple scales on the three faces, enabling compact designs with diverse ratios like 1:20, 1:50, or 1:100. Scales were applied through hand-engraving with scribing tools on a dividing board for accuracy or, later, die-stamping to imprint lines and numerals into the wood surface, followed by filling the incisions with blacking compounds like charcoal and oil for visibility. Standard lengths were established at 12 inches for imperial units or 300 mm for metric, providing a consistent tool size for professional use in drafting and engineering.[13] Since the 1920s, companies such as Keuffel & Esser in the United States mass-produced these rulers from boxwood, incorporating wear-resistant finishes like shellac or lacquer to protect the engravings from daily handling and extend durability.[13] Keuffel & Esser, for instance, offered models like the 1419P triangular scale in boxwood with celluloid edges starting around 1913, priced at $1.35, reflecting the era's emphasis on affordable yet high-precision tools.[13] These methods built upon pre-20th century woodworking techniques, adapting them for standardized industrial output.[35]Contemporary Designs
Contemporary designs of scale rulers emphasize advanced materials that enhance portability, durability, and environmental sustainability. Engineered plastics like ABS and acrylic are widely adopted for their lightweight construction, facilitating easy handling in professional drafting environments.[1] Aluminum alloys offer superior resistance to bending and corrosion, making them suitable for demanding applications in architecture and engineering. Eco-friendly alternatives, such as bamboo derived from sustainable sources and rulers made from recycled plastic composites, have become increasingly common, appealing to users prioritizing reduced environmental impact.[4] Key innovations in these designs include laser-etched scales, which provide high-contrast, permanent markings for improved accuracy and longevity over traditional ink-based printing. Foldable and pocket-sized models, often constructed from aluminum or flexible composites, allow for compact storage and convenient use during on-site inspections. Devices like the NeoRuler feature digital displays for custom scale creation and unit conversion, bridging analog measurement with digital workflows.[36] The emergence of 3D-printed custom scale rulers since the 2010s has enabled tailored production, where users can design rulers with specific scales or engravings using accessible software and printers. Many modern manufacturers adhere to ISO 9001 standards, ensuring consistent precision and traceability in production processes. While the proliferation of CAD software has diminished the routine use of physical scale rulers in office-based design, they remain indispensable for fieldwork in construction and surveying, where quick, reliable analog measurements are essential despite digital alternatives.Reading and Using a Scale Ruler
Step-by-Step Guide
To effectively measure dimensions from a scaled drawing using a scale ruler, gather the necessary tools: the appropriate scale ruler (such as an architect's or engineer's scale), the drawing itself, and optionally a calculator for verifying complex multiplications.[3] Begin by confirming the scale ratio, which represents the proportional relationship between the drawing and the real-world object, such as 1:100 or 1/8" = 1'.[3][37] Follow these sequential steps to interpret and apply the scale ruler accurately:- Identify the scale ratio on the drawing: Locate the scale notation, often in the title block at the lower right corner of the plan. This indicates the factor by which measurements must be adjusted; for instance, a 1:100 scale means 1 unit on the drawing equals 100 units in reality. Architect's scales commonly use ratios like 1/8" = 1'-0", while engineer's scales use ratios like 1" = 20'.[3][37]
- Select the correct edge of the scale ruler: Choose the side or edge of the triangular ruler that matches the drawing's scale ratio. Align your eye level with the ruler to ensure precise reading, and note whether the scale reads left-to-right or bidirectionally depending on the tool type.[3]
- Align the ruler edge to the line on the drawing: Place the zero (0) point of the selected scale edge precisely at the starting point of the line or dimension to be measured. Ensure the ruler is flat against the drawing surface without any tilt, as misalignment can introduce errors; for fractional readings common on architect's scales, position the zero accurately to capture increments like 1/16 inch.[3][37]
- Read the marked value and apply the scale factor: Slide your view along the ruler to the endpoint of the line and read the corresponding mark, which may be in fractional (e.g., 1/2) or decimal (e.g., 0.5) format depending on the scale's divisions. Multiply this reading by the scale factor to obtain the actual measurement—for example, on a 1:100 scale, a reading of 2.5 units yields 250 units in reality (2.5 × 100). Use a calculator if the multiplication involves decimals or fractions for precision.[3][37]
- Transfer the measurement to actual application: Record or apply the calculated real-world dimension, such as marking it on a physical model or verifying against site conditions. Double-check by measuring a known reference line on the drawing to confirm alignment and factor application.[3]