Hubbry Logo
Engineer Special BrigadeEngineer Special BrigadeMain
Open search
Engineer Special Brigade
Community hub
Engineer Special Brigade
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Engineer Special Brigade
Engineer Special Brigade
from Wikipedia

Engineer special brigade
Engineer special brigade shoulder sleeve insignia
Active1942–1955
CountryUnited States
AllegianceUnited States of America
BranchArmy
TypeAmphibious Engineers
RoleAmphibious assaults, shore-to-shore operations
SizeBrigade
EngagementsBattle of Normandy

The Engineer Special Brigades were brigade-sized amphibious forces of the United States Army developed during World War II and active from 1942 to 1955. Initially designated engineer amphibian brigades, they were redesignated engineer special brigades in 1943. The 1st, 5th, and 6th Engineer Special Brigades were assigned to the European Theater of Operations. The 1st Engineer Special Brigade participated in the landings in Sicily and Italy before joining the 5th and 6th Engineer Special Brigades for the invasion of Normandy.

The 2nd, 3rd and 4th Engineer Special Brigades were assigned to the Southwest Pacific Area, and participated in the campaigns in the Bismarck Archipelago, New Guinea, Leyte, Luzon, the Southern Philippines and Borneo campaign. The 1st Engineer Special Brigade fought in both theaters of the war, participating in the Okinawa campaign near the end of the war. The 2nd Engineer Special Brigade remained active after the war, and served in the Korean War before being inactivated in 1955.[1]

Concept

[edit]

At the onset of direct American involvement in World War II, it became apparent that the United States would need a large strategic and tactical amphibious warfare capability. In 1941, the amphibious forces were divided into two corps: one in the Atlantic, and one in the Pacific. Both were combined United States Army and United States Marine Corps commands, administered by the United States Navy. The Amphibious Corps, Atlantic Fleet, consisted of the 1st Infantry Division and the 1st Marine Division, while the Amphibious Corps, Pacific Fleet, consisted of the 3rd Infantry Division and the 2nd Marine Division.[2]

In April 1942, the United States and United Kingdom agreed on plans for an emergency invasion of Northwest Europe in the late northern summer of 1942 (Operation Sledgehammer) that would be conducted in the event of signs that the Soviet Union was on the brink of collapse, or that the Germans were withdrawing from Western Europe, possibly due to an internal coup or collapse. This would be followed by a full-scale crossing of the English Channel in mid-1943 (Operation Roundup). These were envisaged as shore-to-shore operations. The US Navy's policy at this time of only taking volunteers meant that it was short of manpower, and those personnel it had available were mainly allocated warships and the amphibious ships required for ship-to-shore operations. This meant that the landing craft for Sledgehammer would have to be operated by the British and the US Army.[3][4]

Amphibious Training Center

[edit]

The Joint Staff then considered the issue of amphibious warfare training. Very large scale operations were contemplated in both Europe and the Pacific, which the Army would have to conduct. To have the Marines carry out all amphibious operations was impractical, as there were limitations on its size, and joint Army-Marine amphibious operations would involve problems of coordination in view of their different organization, doctrine and procedures. The Joint Staff planners therefore felt that the Army should conduct amphibious training. This meant that the Army would have to establish its own amphibious training establishment.[5]

Training at Camp Edwards, Massachusetts

The Joint Staff hoped to have twelve Army divisions (eleven infantry and one armored) trained in amphibious warfare by 1 February 1943. Another two infantry divisions and one armored division would receive training overseas. This did not include the 1st, 3rd and 9th Infantry Divisions, which were already undergoing training, the 3rd on the West Coast and the 1st and 9th on the East coast. In addition, the Army would train enough boat crews to move eight divisions. These would also be available by 1 February 1943. The Joint Staff intended to create three amphibious training centers.[5] The plan was to train four divisions at Camp Edwards, Massachusetts, six at Camp Carrabelle, Florida, and two at Fort Lewis, Washington. It was intended that training at Camp Edwards would be conducted between July and November 1942. The Army Ground Forces was given responsibility for the development of amphibious warfare doctrine and the conduct of unit training.[5]

The Army activated its Amphibious Training Center at Camp Edwards on 22 May 1942, with Colonel Frank A. Keating, the chief of staff of the 2nd Infantry Division, assigned to command it. It became active on 15 June 1942.[6] The 45th Infantry Division underwent training at Camp Edwards from 15 July to 20 August 1942. Training concluded with major amphibious maneuvers from 17 to 19 August, during which the division conducted a shore-to-shore operation, embarking from Washburn Island, Massachusetts, and crossing Vineyard Sound to land on Martha's Vineyard, about 6 miles (9.7 km) away. It was followed by the 36th Infantry Division, which arrived on 22 August, and completed its training on 3 October. The final three days saw a repeat of the shore-to-shore exercise the 45th had conducted.[7]

Amphibian engineers land 45th Division troops at Cape Cod using the old LCPs.

The Amphibious Training Center moved to Camp Carrabelle in October 1942. The first formation to undergo training there was the 38th Infantry Division, which commenced its amphibious warfare training there on 23 November 1942. The final shore-to-shore amphibious maneuver was conducted on 17 to 19 December, but performance was not considered satisfactory by the Amphibious Training Center staff, and it was repeated on 28 to 30 December. Camp Carrabelle was renamed Camp Gordon Johnston 13 January 1943. The 28th Infantry Division commenced training on 28 January 1943, and conducted its landing exercise on 7 to 9 March. This was the last division to be trained by the Amphibious Training Center, although three separate battalions, the 81st Chemical Battalion, 61st Medical Battalion and 462nd Anti-Aircraft Artillery Automatic Weapons Battalion, received training there in May 1943.[8]

On 10 March 1943, the Chief of Staff of the United States Army, General George Marshall, and the Commander-in-Chief, United States Fleet, Admiral Ernest King, entered into an agreement that amphibious training would henceforth be a Navy responsibility. The Army Ground Forces was relieved of responsibility for the Amphibious Training Center on 16 March, and it was closed on 10 June.[9]

Training for Operation Downfall

[edit]

Following the defeat of Germany in May 1945 (V-E Day), the US Army implemented a significant shift in its training program, primarily focused on preparing for Operation Downfall, the planned invasion of the Japanese home islands. Requiring large-scale movements and specialized training for the final phase of WWII. This redeployment training program, known as Redeployment Training or Rotation and Redistribution,[10] featured the use of underwater demolitions for obstacle clearance by ESB units and beach defenses.[11]

Engineer Amphibian Command

[edit]

In addition to training combat units in amphibious warfare, the Army also had to train personnel in the operation and maintenance of landing craft.[12] Operating the necessary landing craft was estimated to require 48,000 men, organized into 18 boat operating regiments and seven boat maintenance battalions.[12] Each boat regiment had three battalions, each of three boat companies.[13] It was agreed with the British that boat units deploying to the UK would receive their initial training in the US, and final training in the UK. A consequence was the amphibian engineers' adoption of the British Combined Operations shoulder patch, but with the colors switched to gold on blue. The War Department also authorized the wearing of a pocket patch showing a scarlet seahorse on a white background, these being the colors of the United States Army Corps of Engineers.[14]

Left to right: Brigadier Generals David Ogden, Clarence Sturdevant, Daniel Noce and Colonel Arthur Trudeau at Camp Edwards, Massachusetts in October 1942

The Engineer Amphibian Command was created on 10 June 1942 at Camp Edwards, Massachusetts under the command of Colonel Daniel Noce, with Lieutenant Colonel Arthur Trudeau as his chief of staff. Noce was answerable to Brigadier General Clarence Sturdevant,[12] the Assistant Chief of Engineers for training.[15] Additional training facilities were established at Cape Cod. The beach south of Buzzards Bay was selected for shore facilities, and Washburn Island was leased as a training site. Some $1.6 million was spent on dredging and the construction of roads, camps, piers and utilities.[16]

Noce and Trudeau considered how the boat units would operate in combat, and noted the importance of well-trained shore parties to load and unload the boats, and establish supply dumps on the far shore. Since combat engineers were not specifically trained for the task, and would in any case have their hands full dealing with obstacles and fortifications, they felt that a permanent organization was required. They drew up a structure for an engineer shore regiment that would combine the functions of a Navy beach party and the Marine Corps shore party. About half the size of a boat regiment, a shore regiment would consist of three battalions, each with a near shore company and two far shore companies. Each shore regiment would be grouped with a boat regiment, a boat maintenance battalion, and support units to form an engineer amphibian brigade capable of moving an entire infantry division. The proposed organization was approved, and authority was granted to form eight engineer amphibian brigades.[17]

The table of organization and equipment for an engineer amphibian brigade provided for 349 officers, 20 warrant officers, and 6,814 enlisted men. The Army searched its personnel records for men with appropriate marine experience.[13] Arrangements were made to train ships' carpenters and marine mechanics at the Gray Marine Motor Company in Michigan, Higgins Industries in Louisiana, and Evinrude Outboard Motors and the Manitowoc Shipbuilding Company in Wisconsin. In all, 3,368 personnel were trained by these companies. Another 1,481 were trained at the Army Ordnance School at Aberdeen, Maryland, the Naval Operating Base at Toledo, Ohio, and the Army Motor School at Fort Holabird, Maryland. The majority, some 33,627 men, were trained at schools run by the Engineer Amphibian Command.[18] Instructors were obtained from the British Army, Royal Navy, and the United States Coast Guard, Marine Corps and United States Coast and Geodetic Survey.[19] Of the 37,651 enlisted men assigned between 10 June 1942 and 31 December 1943, 20,244 came from replacement centers, 11,898 from reception centers and 5,509 from other units; of the 2,899 officers, 634 came from other units, 825 from the Officer Reserve Corps, 965 from Officer Candidate Schools, and 475 through direct commissioning from civilian life.[20]

A jeep comes ashore over Sommerfeld track in a training exercise at Camp Edwards.

The Engineer Amphibian Command estimated that it required 1,000 36-foot (11 m) landing craft and 225 50-foot (15 m) tank lighters, but it was soon discovered that this exceeded the number available. The Navy agreed to turn over 300 36-foot craft from new production in June and July.[16] Initially the Engineer Amphibian Command used whatever landing craft were available: the 36-foot landing craft, personnel (LCP); landing craft, ramp (LCR); landing craft, personnel (ramp) (LCP(R)); and landing craft, vehicle (LCV);[21] and a small number of the 50-foot landing craft, mechanized (LCM). Some were petrol-, and some diesel-powered. The 36-foot boats were later superseded by the landing craft, vehicle, personnel (LCVP), which combined their attributes.[22]

The shortage of landing craft meant that enough were available for only one boat battalion at a time. The practice of allocating the boats to one battalion at a time, while the only way that all battalions could be trained, annoyed the Amphibious Training Center, as it meant that its ground units were always training with inexperienced boat crews.[23] Tests were carried out with the newly-developed DUKW, and it was decided that each brigade should be equipped with three of them.[24] An important organizational change as a result of experience with training occurred on 5 September, when Noce decided to group the boat and shore engineers into three boat and shore regiments, each with one boat and one shore battalion. Each boat and shore regiment could work with one of the three infantry regiments in an infantry division.[24]

While the Navy was still willing to allow the Army to operate landing craft, it reserved the right to operate ocean-going landing ships. A dispute arose over which category the larger 105-foot (32 m) Landing craft, tank (LCT) belonged to. The LCT was powered by the same Gray marine diesel engine as the LCVP and LCM, so no special training was required to operate or maintain it. The Engineer Amphibian Command was informed on 21 May 1942 that the Navy had agreed that the Army could operate LCTs, but the British then decided that the LCT was a landing ship after all, and on 29 June the Navy announced that it would be operating the LCTs. This came as a blow to the Engineer Amphibian Command, as it meant that it was dependent on the Navy to transport its larger pieces of equipment like the D8 bulldozer.[25]

Engineer trainees land a 75 mm gun.

The Navy also announced that it would take over the operation of all landing craft as soon as possible. The reason for this was that Sledgehammer had been abandoned in favor of an invasion of French Northwest Africa (Operation Torch), a ship-to-shore operation, and plans for the 1943 cross-Channel invasion operation were scaled back on 1 July from twelve to eight divisions. The number of engineer amphibian brigades was cut from eight to five; on 17 August it was reduced to just three.[26] Given the additional time, the Navy now believed that it could train all boat crews, but the absorption of the engineer amphibian brigades into the Navy was precluded by the fact that they contained draftees, which the Navy was still refusing to accept.[27]

Uncertainty about the future became acute as the year wore on, as Camp Edwards was unsuitable for boat operations in winter. The Amphibious Training Center moved to Camp Carrabelle, Florida in October, taking the 2nd Engineer Amphibian Brigade with it, but left the 3rd Engineer Amphibian Brigade at Camp Edwards. Up to this point, all plans had revolved around operations in Europe, as the war against Germany had priority, although in planning for amphibious training for twelve divisions, the War Department had also been providing for operations in the Pacific. In the wake of the US victory in the Battle of Midway in June 1942, plans were advanced for offensive operations in the Pacific, particularly in the Solomon Islands.[28]

LCT-349 assists in a training exercise.

Amphibious operations in the Southwest Pacific Area (SWPA) depended on the availability of landing craft. The Navy intended to ship only 60 per month to the theater, as they had to be sent deckloaded on ships bound for Australia, as they were too large to fit into ships' holds. Trudeau proposed shipping them as components. In this way hundreds could be carried in a ship's hold. They could be assembled in Australia by the 411th Base Shop Battalion. The decision to ship the 2nd Engineer Amphibian Brigade to Australia freed accommodation at Camp Carrabelle for the 3rd Engineer Amphibian Brigade, although it meant that yet another cycle of training would be conducted with inexperienced boat crews. On 27 November, General Douglas MacArthur asked for two more brigades. He also recommended that their name be changed from "amphibian" to "special".[29]

Voluntary enlistment in the Navy of men aged 18 to 37 ended on 5 December 1942; henceforth men in this age group could be obtained only through the draft.[30] This cleared the way for absorption of the Army boat crews into the Navy. On 8 March 1943, the War and Navy Departments agreed that landing craft should be operated by the Navy, but exempted the three engineer special brigades allocated to SWPA. The 4th Engineer Special Brigade completed its training at Camp Edwards in August 1943, and then moved to Camp Gordon Johnston, where it conducted joint training with the 4th Infantry Division. After it departed for Australia in December 1943, the Engineer Amphibian Command provided instruction to replacement crews before being disbanded in April 1944.[31]

1st Engineer Special Brigade

[edit]

The 1st Engineer Amphibian Brigade was activated at Camp Edwards on 15 June 1942.[32] Some 2,269 men were transferred from existing units, the 37th Engineer Combat Regiment providing the nucleus of the boat regiment, and the 87th Engineer Heavy Ponton Battalion that of the shore regiment.[32] Brigadier General Henry C. Wolfe was assigned as commanding general on 7 July 1942.[33] The brigade trained until 15 July, when it was assigned to the Amphibious Training Command.[32]

Monument for the 1st Engineer Special Brigade on Utah Beach

The brigade was pulled from the Amphibious Training Center early and sent to England to participate in Operation Sledgehammer, departing from the New York Port of Embarkation on 5 August, and arriving on 17 August.[34] Elements of the brigade participated in the Operation Torch. The 531st Shore Regiment and 286th Signal Company acted as the shore party for the 1st Infantry Division, while the 2nd Battalion, 591st Engineer Boat Regiment was reorganized as a shore battalion, and operated in support of Combat Command B, 1st Armored Division.[35] Brigade headquarters departed Glasgow on 24 November, and landed in North Africa on 6 December.[34] Wolfe became chief engineer at the Services of Supply on 22 February and Colonel R. L. Brown of the 531st Engineer Shore Regiment acted as commander.[36]

Wolfe rejoined the brigade on 22 March 1943, but on 25 May he became S-3 at Allied Force Headquarters, and was replaced by Colonel Eugene M. Caffey.[36] On 10 May 1943, the brigade was redesignated the 1st Engineer Special Brigade.[37] The 591st Boat Regiment was detached, as was the 561st Boat Maintenance Company, which remained in England working on Navy landing craft, but the 36th and 540th Engineer Combat Regiments were attached for the 10 July Allied invasion of Sicily (Operation Husky),[36] bringing the strength of the brigade to over 20,000.[38] The brigade then participated in the Allied invasion of Italy at Salerno (Operation Avalanche) on 9 September.[39]

In November 1943, the headquarters of the 1st Engineer Special Brigade, along with the 531st Shore Regiment, 261st Medical Battalion, 286th Signal Company, 262nd Amphibian Truck Battalion and 3497th Ordnance Medium Automotive Maintenance Company, returned to England to participate in the invasion of Normandy (Operation Overlord).[39] This nucleus of 3,346 men was built up to a strength of 15,000 men for Overlord.[40] During Exercise Tiger, a rehearsal for the Normandy operation on 28 April, German E-Boats attacked a convoy of landing ships, tank (LSTs) of the XI Amphibious Force carrying troops of the brigade. Two LSTs were sunk, and the brigade lost 413 men dead and 16 wounded.[38] The exercise was observed by Lieutenant General Omar N. Bradley, who, unaware of the sinking of the LSTs, blamed the resulting poor performance of the brigade on Caffey, and had him temporarily replaced for the Normandy landings by Brigadier General James E. Wharton.[41]

The brigade participated in the D-Day landing on Utah Beach, and operated as Utah Beach Command until 23 October 1944, and then as the Utah District of the Normandy Base Section until 7 December 1944.[34] Under the command of Colonel Benjamin B. Talley, the brigade headquarters returned to England, and embarked for the United States on 23 December. It arrived at Fort Dix, New Jersey, on 30 December. After four weeks leave, it reassembled at Fort Lewis, Washington. Part of the brigade headquarters went by air to Leyte to join the XXIV Corps for the invasion of Okinawa, while the rest traveled directly to Okinawa on the USS Achernar.[42] The brigade was in charge of unloading on Okinawa from 9 April to 31 May. It then prepared for the invasion of Japan. This did not occur due to the end of the war, and the brigade landed in Korea on 12 September 1945. Its final commander was Colonel Robert J. Kasper, who assumed command on 1 November 1945.[43] The brigade was inactivated in Korea on 18 February 1946.[34]

On 30 September 1986, the brigade was reformed at Fort Leonard Wood, Missouri, as the 1st Engineer Brigade, and was assigned to the United States Army Training and Doctrine Command.[37]

Organization for the landing in Normandy

[edit]
  • Brigade Headquarters
  • 531st Engineer Shore Regiment
  • 24th Amphibian Truck Battalion
    • 462nd Amphibian Truck Company
    • 478th Amphibian Truck Company
    • 479th Amphibian Truck Company
  • 306th Quartermaster Battalion
    • 556th Quartermaster Railhead Company
    • 562nd Quartermaster Railhead Company
    • 3939th Quartermaster Gas Supply Co
  • 191st Ordnance Battalion
    • 3497th Ordnance Medium Automotive Maintenance Company
    • 625th Ordnance Ammunition Company
    • 161st Ordnance Platoon
  • Quartermaster Hq 1st Engineer Special Company (1 section)
  • 577th Quartermaster Battalion
    • 363rd Quartermaster Service Company
    • 3207th Quartermaster Service Company
    • 4144th Quartermaster Service Company
  • 261st Medical Battalion (Amphibious), Companies A, B and C
  • 449th Military Police Company
  • 286th Joint Assault Signal Company
  • 33rd Chemical Decontamination Company
  • Units Attached to 1st Brigade
    • 23d Ordnance Bomb Disposal Squadron
    • Signal Photo Team (Det. E)
    • 2nd Naval Beach Battalion
    • 490th Port Battalion
      • 226th Port Company
      • 227th Port Company
      • 228th Port Company
      • 229th Port Company
    • 518th Port Battalion
      • 298th Port Company
      • 299th Port Company
      • 300th Port Company
      • 301st Port Company
      • 278th Port Company
      • 279th Port Company
    • 519th Port Battalion
      • 302th Port Company
      • 303th Port Company
      • 304th Port Company
      • 305th Port Company
      • 280th Port Company
      • 281st Port Company
    • 38th Engineer (GS) Regiment (2 battalions)
    • 1605th Engineer Map Section
    • 440th Engineer Dep. Company (1 platoon)
    • 1217th Engineer F. F. Platoon
    • 1218th Engineer F. F. Platoon
    • 1st Medical Dep. (2 Sect. Sup Platoon)
    • 6th Surgical Group (12 teams)
    • 175th Signal Rep. Company (Det.)
    • 218th Signal Dep. Company (Det.)
    • 980th Signal Service Company (Det.)
    • 999th Signal Service Company (Sp. Det.)
    • 3111st Signal Service Battalion (Sp. Det.)
    • 165th Signal Photo Team (Det. E)
    • 607th Quartermaster Graves Registration Company (1 platoon)
    • 262d Quartermaster Battalion
      • 4061st Service Company
      • 4088th Service Company
      • 4090th Service Company
      • 4190th Service Company
    • 244th Quartermaster Service Battalion
      • 3877th Gas Supply Company
      • 3878th Gas Supply Company
      • 522d Railhead Company
    • 4041st Quartermaster Truck Company
    • 3683d Quartermaster Truck Company
    • 3684th Quartermaster Truck Company
    • 3692d Quartermaster Truck Company
    • 4002d Quartermaster Truck Company
    • 308th Quartermaster Railhead Company
    • 537th Quartermaster Battalion
      • 4083d Quartermaster Service Company
      • 4092d Quartermaster Service Company
      • 4132d Quartermaster Service Company
    • 23d Ordnance Bomb Disposal Squadron
    • 3516th MAM Company
    • 783d Military Police Battalion, Company D
    • 301st Military Police, PW Esc. Guard Company
    • 595th Military Police, PW Esc. Guard Company
    • 815th T. C. Amphibious Truck Company
    • 816th T. C. Amphibious Truck Company
    • 817th T. C. Amphibious Truck Company
    • 818th T. C. Amphibious Truck Company
    • Det. VIII AF Intransit Dep. Group
    • Det. A, 112th Port


Source: [44]

Campaign credits

[edit]
  • World War II
    • Sicily
    • Naples-Foggia
    • Normandy (with arrowhead)
    • Northern France
    • Ryukyus

Source:[37]

2nd Engineer Special Brigade

[edit]

The 2nd Engineer Amphibian Brigade was activated at Camp Edwards on 20 June 1942,[13] with the 532nd Engineer Shore Regiment and 592nd Engineer Boat Regiment assigned.[45] Colonel William F. Heavey, who was appointed its commander on 6 August 1942, and was promoted to brigadier general on 10 September, led the brigade for the rest of the war.[46] It quickly expanded to 6,000 men, but lost 1,500 in September to the 540th Shore Regiment.[47] On 1 October, the brigade was reorganized; the 532nd and 592nd became engineer amphibian regiments and the 542nd Engineer Amphibian Regiment was formed. The brigade, less the 542nd Engineer Amphibian Regiment, moved by rail to Camp Carrabelle on 15 October. On 7 November, the brigade moved to Fort Ord, California, where it was joined by the 542nd Engineer Amphibian Regiment the following day. In January and February 1943, the brigade embarked from the San Francisco Port of Embarkation on a series of vessels bound for Australia.[48]

The US 532nd Engineer Boat and Shore Regiment lays beach mats to allow vehicles to move along the sand at Red Beach, near Lae.

In Australia, the brigade was based at Cairns, although its headquarters was co-located with that of I Corps in Rockhampton, 600 miles (970 km) away. The brigade helped the 411th Base Shop Battalion establish a landing craft construction facility, which produced its first finished LCVP on 7 April. In May, elements of the brigade began moving to New Guinea. A detachment of ten LCMs of the 592nd Engineer Amphibian Regiment went to Port Moresby, where it moved supplies to the Lakekamu River. They were followed by detachments of the 532nd and 542nd, which moved to Milne Bay, Oro Bay and Samarai.[49] On 30 June, the brigade participated in its first amphibious operation, the landing at Nassau Bay.[50] On 4 July, the brigade was renamed the 2nd Engineer Special Brigade, and its three regiments became engineer boat and shore regiments.[48]

The 2nd Engineer Special Brigade trained at Cairns with the Australian 9th Division in June and July 1943. The 532nd Engineer Boat and Shore Regiment then moved to New Guinea, and landed part of the 9th Division at Red Beach near Lae on 4 September. On 22 September, it landed elements of the 9th Division at Scarlet Beach near Finschhafen.[51][52] On 11 October, four Japanese barges attempted to land on Scarlet Beach. They were defeated by men of the 532nd Engineer Boat and Shore Regiment, including Private Junior Van Noy, who was posthumously awarded the Medal of Honor.[53]

Over the next few months, units of the 2nd Engineer Special Brigade participated in the landings at Arawe, Long Island, Saidor, Sio, Los Negros, Talasea, Hollandia, Wakde and Biak. On 20 October 1944 it participated in the amphibious assault on Leyte in the Philippines. Over the following months it participated in a series of amphibious operations to liberate the Philippines.[54] Nine of the 2nd Engineer Special Brigade's units were awarded Presidential Unit Citations.[55]

The 2nd Engineer Special Brigade arrived back in San Francisco on 16 December 1945, and returned to Fort Ord.[34] It later moved to Fort Worden, Washington, where it was stationed when the Korean War broke out in June 1950.

Korean War

[edit]

The brigade moved to Yokohama, The brigade was re-designated as the 2nd Amphibious Support Brigade on 26 June 1952. In December 1953 it moved to Camp McGill in Japan, where it was inactivated on 24 June 1955.[56]

  • Amphibious Assault Support: The 2nd ESB participated in the Inchon Landing in September 1950, carrying the 1st Marine Division and supporting the assault.[57]
  • Port and Beach Operations: After the landings, they were responsible for running port operations, managing cargo loading and unloading, establishing supply dumps on the shore, and providing emergency construction. The 2nd ESB ran port operations at Inchon and later at other ports like Suyong and Ulsan.
  • Evacuation Operations: The brigade was instrumental in the evacuation of Hungnam in December 1950, managing the shore operations to load out U.N. troops, equipment, and thousands of civilian refugees in what became the largest evacuation by sea in U.S. military history.

The service of the 2nd ESB in the Korean War earned them decorations, including the Presidential Unit Citation (Navy) with the streamer "INCHON," and the Republic of Korea Presidential Unit Citation.

1956 to 2015

[edit]

The brigade was reactivated at Fort Belvoir, Virginia, on 13 November 1956, and inactivated at Fort Story, Virginia, on 25 August 1965. It was reactivated as the 2nd Engineer Brigade at Joint Base Elmendorf-Richardson, Alaska, on 16 September 2011.[56][58] Although no longer an amphibian brigade, it wore the World War II-era seahorse emblem until inactivated there on 15 May 2015.[59]

World War II organization

[edit]
  • Brigade Headquarters
  • 532nd Engineer Boat and Shore Regiment
  • 542nd Engineer Boat and Shore Regiment
  • 592nd Engineer Boat and Shore Regiment
  • 562nd Engineer Boat Maintenance Battalion
    • 1458th Engineer Maintenance Company
    • 1459th Engineer Maintenance Company
    • 1460th Engineer Maintenance Company
    • 1570th Engineer Heavy Equipment Shop Company
    • 1762nd Engineer Parts Supply Platoon
  • 262nd Medical Battalion
  • 162nd Ordnance Maintenance Company
  • 189th Quartermaster Gas Supply Company
  • 287th Signal Company
  • 695th Truck Company
  • 3498th Ordnance Medium Maintenance Company
  • 5204th Transportation Corps Amphibious Truck Company
  • Medical Detachment, 2nd Engineer Special Brigade
  • Support Battery (Provisional) 2nd Engineer Special Brigade
  • 416th Army Service Forces Band

Source:[60]

Campaign credits

[edit]
  • World War II
    • New Guinea
    • Leyte (with arrowhead)
  • Korean War
    • UN Defensive
    • UN Offensive
    • CCF Intervention
    • First UN Counteroffensive
    • CCF Spring Offensive
    • UN Summer-Fall Offensive

Source:[37]

3rd Engineer Special Brigade

[edit]

Commanded for almost the entire war by Colonel David Ayres Depue Ogden, who was promoted to brigadier general on 18 September 1942,[61] the 3rd Engineer Amphibian Brigade was activated at Camp Edwards on 6 August 1942 with the 533rd Engineer Shore Regiment and 593rd Engineer Boat Regiment assigned.[34] On 9 November they became engineer amphibian regiments, and the 543rd Engineer Amphibian Regiment was assigned to the brigade. The brigade moved to Camp Gordon Johnston by rail in November.[62] In April 1943 it relocated to Fort Ord, where it prepared to move to Australia. Due to shipping shortages and changes in priorities, this took six months.[63] The brigade was redesignated the 3rd Engineer Special Brigade on 25 May 1943, and the amphibian regiments became engineer boats and shore regiments.[34]

The first unit of the brigade to reach New Guinea was the 563rd Engineer Boat Maintenance Battalion, which arrived at Milne Bay on 14 October 1943; the rest of the brigade followed in December 1943 and January 1944. The brigade became widely scattered, and never operated as a single unit, but Ogden retained control using a special radio net.[64] It participated in the landings at Talasea, Aitape, Lingayen, and Borneo and Mindanao.[65] The brigade returned to the United States on 20 December 1945, and was inactivated two days later.[34]

World War II organization

[edit]
  • Brigade Headquarters
  • Medical Detachment
  • 533rd Engineer Boat and Shore Regiment
  • 543rd Engineer Boat and Shore Regiment
  • 593rd Engineer Boat and Shore Regiment
  • 563rd Engineer Boat Maintenance Battalion
    • HQ and HQ Detachment
    • 1461st Engineer Maintenance Company
    • 1462nd Engineer Maintenance Company
    • 1463rd Engineer Maintenance Company
    • 1571st Engineer Heavy Equipment Shop Company
    • 1763rd Engineer Parts Supply Platoon
  • 263rd Medical Battalion
  • 163rd Ordnance Maintenance Company
  • 198th Quartermaster Gasoline Supply Company
  • 288th Signal Company
  • 693rd Truck Company
  • 3499th Ordnance Medium Maintenance Company
  • 417th Army Service Forces Band

Source: [66]

Campaign honors

[edit]
  • World War II
    • New Guinea

Source:[34]

4th Engineer Special Brigade

[edit]

The 4th Engineer Amphibian Brigade was activated at Fort Devens on 1 February 1943, with the 534th, 544th and 594th Engineer Amphibian Regiments assigned. The brigade moved to Camp Edwards, where it was redesignated the 4th Engineer Special Brigade on 10 May, with the three regiments becoming engineer boat and shore regiments. The brigade moved to Camp Gordon Johnston in September 1943, and then staged at Camp Stoneman, California, on 21 April 1944, before departing the San Francisco Port of Embarkation for New Guinea on 28 April.[67] Its commanding general throughout its lifetime was Colonel Henry Hutchings, Jr., who was promoted to brigadier general on 15 January 1944.[68]

The 4th Engineer Amphibian Brigade arrived at Oro Bay on 18 May 1944,[67] where its headquarters opened on 23 May. Most of the rest of the brigade arrived in the area over the next few weeks, and participated in amphibious training with the 31st Infantry Division. The Boat Battalion of the 534th Engineer Boat and Shore Regiment was sent to the Bulimba Boat Yards in Brisbane, where it was engaged in assembling landing craft. It participated in the assaults on Morotai in the Netherlands East Indies on 15 September 1944,[69] and Lingayen Gulf on Luzon in the Philippines on 9 January 1945.[70] It was inactivated in Japan on 15 April 1946.[67]

World War II organization

[edit]
  • Brigade Headquarters
  • Medical Detachment
  • 534th Engineer Boat and Shore Regiment
  • 544th Engineer Boat and Shore Regiment
  • 594th Engineer Boat and Shore Regiment
  • 564th Engineer Boat Maintenance Battalion
  • 264th Medical Battalion
  • 164th Ordnance Maintenance Company
  • 199th Quartermaster Gasoline Supply Company
  • 289th Signal Company
  • 694th Truck Company
  • 3492nd Ordnance Medium Maintenance Company
  • 4th Engineer Amphibian Brigade Band (August 1945 became 434th Army Service Forces Band attached to Sixth Army)

Source:[66]

Campaign honors

[edit]
  • World War II:
    • New Guinea
    • Luzon

Source:[67]

5th Engineer Special Brigade

[edit]
5th Engineer Special Brigade monument on Omaha Beach

The 336th Engineer General Service Regiment was activated at Camp Rucker, Alabama, on 25 July 1942,[71] under the command of Lieutenant Colonel William D. Bridges. On 7 April 1943, it was redesignated the 1119th Engineer Combat Group, with its 1st and 2nd Battalions becoming the 336th and 234th Engineer Combat Battalions respectively. The 1119th Engineer Combat Group moved to Fort Pierce, Florida, on 15 April, where the 348th Engineer Combat Battalion was assigned as the third battalion of the group on 21 April. The group moved to Camp Pickett, Virginia, on 16 June. The 234th Engineer Combat Battalion was detached on 15 August, and replaced by the 37th Engineer Combat Battalion on 22 August. The group staged for overseas movement at Camp Myles Standish, Massachusetts. It left the Boston Port of Embarkation on 21 October, and arrived in the UK on 1 November.[72] It was redesignated the 5th Engineer Special Brigade on 12 November 1943 at Swansea, Wales.[73] The following day, Colonel William M. Hoge assumed command of the brigade.[74]

Unlike the brigades in the Pacific, those in the European Theater had no boat units, although they did have additional service units to handle cargo over the beaches.[74] When Hoge stepped up to command the provisional Special Brigade Group, he was replaced by Colonel Doswell Gullatt.[75] For the invasion of Normandy, the brigade had a strength of 6,756 men.[76] It landed on Omaha Beach, where it was responsible for the eastern beaches, Easy Red, Fox Green and Fox Red.[77] Gullatt was hospitalized due to illness in July 1944, and Bridges assumed command on 31 July.[78] The brigade operated Omaha Beach until it was closed on 19 November 1944. On 4 January 1945, the brigade was transferred to the Seine Section of Paris, where it supervised construction activities.[79] It returned to the United States on 11 July 1945, and was inactivated at Camp Gordon Johnston on 20 October of that year.[80]

Units assigned on D-Day, 6 June 1944

[edit]
  • Brigade Headquarters
  • 37th Engineer Combat Battalion
  • 336th Engineer Combat Battalion
  • 348th Engineer Combat Battalion
  • 61st Medical Battalion
    • 391st Medical Collection Company
    • 392nd Medical Collection Company
    • 395th Medical Collection Company
    • 643rd Medical Clearing Company
  • 210th Military Police Company
  • 30th Chemical Decontamination Company
  • 294th Joint Assault Signal Company
  • 251st Ordnance Battalion
    • 616th Ordnance Ammunition Company
    • 3566th Ordnance Medium Automotive Maintenance Company
    • 26th Bomb Disposal Squad
    • 4042nd Quartermaster Truck Company
  • 533rd Quartermaster Battalion
    • 4141st Quartermaster Service Company
    • 4142nd Quartermaster Service Company
    • 4143rd Quartermaster Service Company
  • 131st Quartermaster Battalion (Mobile)
    • 453rd Amphibian Truck Company
    • 458th Amphibian Truck Company
    • 459th Amphibian Truck Company
  • 619th Quartermaster Battalion
    • 97th Quartermaster Railhead Company
    • 559th Quartermaster Railhead Company
    • Co. A, 203rd Quartermaster Gas Supply Battalion
  • Attached Units
    • 6th Naval Beach Battalion
    • 440th Engineer Depot Co. (1 Platoon)
    • 467th Engineer Maintenance Co. (1 Platoon)
    • 1219th Engineer F.F. Platoon
    • 26th Bomb Disp. Squadron
    • 1st Medical Depot Sec.
    • 3d Auxiliary Surgical Group (8 Teams)
    • VHF Signal Unit (Br)
    • 175th Signal Rep. Det.
    • 215th Signal S&I Section
    • 980th Signal Radio Link
    • 162d Signal Photo Co. Det 4
    • 607th Graves Registration Company (2 Platoons)
    • 4042 Quartermaster Tk. Company
    • 487th Port Battalion
      • 184th Port Company
      • 185th Port Company
      • 186th Port Company
      • 187th Port Company
      • 282d Port Company
      • 283d Port Company
    • 502nd Port Battalion
      • 270th Port Company
      • 271st Port Company
      • 272d Port Company
      • 273d Port Company

Source:[81]

Campaign honors

[edit]
  • World War II
    • Normandy
    • Northern France
    • Ardennes-Alsace
    • Central Europe

Source:[67]

6th Engineer Special Brigade

[edit]

The 146th Engineer Combat Regiment was activated at Camp Swift, Texas, on 25 January 1943. On 1 April 1943 it was redesignated the 1116th Engineer Combat Group.[82] The group moved to Fort Pierce, Florida, for amphibious training on 16 August, and then to Camp Pickett, Virginia, on 10 October. It staged at Camp Kilmer, New Jersey, before departing the New York Port of Embarkation on 8 January 1944. It arrived in the UK on 17 January, where it was redesignated the 6th Engineer Special Brigade on 15 May.[73]

The brigade participated in the invasion of Normandy, operating the western end of Omaha Beach, the Charlie, Dog and Easy Green beaches.[83] The brigade lost its commander, Colonel Paul W. Thompson, who was seriously wounded on D-Day, and he was replaced by Colonel Timothy L. Mulligan.[84] It operated Omaha Beach until it was closed on 19 November.[79] The brigade then became responsible for the security of the western coast of the Cotentin Peninsula.[85] On 29 December the brigade was assigned to the Advance Section (ADSEC), where it was responsible for construction and road maintenance. On 28 March 1945, it was made responsible for coal mining. On 14 July the brigade headquarters, without any troops,[86] embarked at Le Havre for the United States. The brigade arrived in the United States on 23 July 1945, and was inactivated at Camp Gordon Johnston on 20 October.[67]

Units assigned on D-Day, 6 June 1944

[edit]
  • Brigade Headquarters
  • 147th Engineer Combat Battalion
  • 149th Engineer Combat Battalion
  • 203rd Engineer Combat Battalion
  • 60th Medical Battalion
    • 453rd Medical Collection Company
    • 499th Medical Collection Company
    • 500th Medical Collection Company
    • 634th Medical Clearing Company
  • 214th Military Police Company
  • 31st Chemical Decontamination Company
  • 293rd Joint Assault Signal Company
  • 74th Ordnance Battalion
    • 618th Ordnance Ammunition Company
    • 3565th Ordnance Medium Automotive Maintenance Company
  • 538th Quartermaster Battalion
    • 967th Quartermaster Service Company
    • 3204th Quartermaster Service Company
    • 3205th Quartermaster Service Company
  • 280th Quartermaster Battalion
    • 460th Amphibian Truck Company
    • 461st Amphibian Truck Company
    • 463rd Amphibian Truck Company
  • 95th Quartermaster Battalion (Mobile)
    • 88th Quartermaster Railhead Company
    • 555th Quartermaster Railhead Company
    • 3820th Gas Supply Company

Source: [87]

Campaign honors

[edit]
  • World War II
    • Normandy
    • Northern France
    • Rhineland
    • Central Europe

Source:[67]

Other amphibian units

[edit]

Provisional Engineer Special Brigade Group

[edit]

The Provisional Engineer Special Brigade Group was formed at Penllergaer, England, on 17 February 1944 to control Omaha Beach. It was commanded by Brigadier General William M. Hoge. Its main components were the 5th and 6th Engineer Special Brigades, and the 11th Port. For the D-Day landing it had a strength of 30,000 men. On 26 June it became the Omaha Beach Command.[88][89]

540th Engineer Combat Group

[edit]

The 540th Engineer Shore Regiment was activated at Camp Edwards on 11 September 1942, and was rushed to Europe to participate in Operation Torch. The 3rd Battalion was inactivated at Camp Edwards on 3 October; thereafter it had only two battalions. It staged at Camp Kilmer, New Jersey, and departed the New York Port of Embarkation and the Hampton Roads Port of Embarkation on 23 October 1942. It was redesignated the 540th Engineer Combat Regiment on 25 October 1942, and assaulted French Northwest Africa on 8 November. It subsequently participated in the assault landings at Licata, Sicily, on 9 July 1943, at Salerno and Anzio in Italy on 9 September 1943 and 22 January 1944 respectively, and the invasion of Southern France on 15 August 1944. It was redesignated the 540th Engineer Combat Group on 15 February 1945, with its 1st and 2nd Battalions becoming the 2832nd and 2833rd Engineer Combat Battalions.[90][66] It was inactivated on 25 October 1945.[91] The 2832nd Engineer Combat Battalion returned to Camp Kilmer on 13 November 1945, where it was disbanded two days later. The 2833rd Engineer Combat Battalion returned to Camp Kilmer on 26 November 1945, and was disbanded on the following day.[92]

411th Engineer Special Shop Battalion

[edit]

The 411th Engineer Base Shop Battalion was formed at Camp Edwards on 17 August 1942. A composite platoon from the battalion went to England with the 1st Engineer Amphibian Brigade. It departed the San Francisco Port of Embarkation on 17 January 1943, and arrived in Australia on 30 January.[93][94] It moved to Cairns where it operated an assembly plant for LCVPs.[95] On 5 June 1944 it moved to Milne Bay, where it operated a facility that assembled the larger LCMs. It was redesignated the 411th Engineer Special Shop Battalion on 1 November 1944. On 16 December it moved to Batangas in the Philippines, where a new LCM assembly plant was established. It returned to the San Francisco Port of Embarkation on 4 February 1946, and was inactivated at Camp Stoneman, California, two days later.[93][96][97]

692nd Engineer Special Shop Battalion

[edit]

The 692nd Engineer Base Shop Battalion was formed at Camp Edwards on 15 May 1943. It was redesignated the 692nd Special Shop Battalion on 12 August. It departed the New Orleans Port of Embarkation on 10 February 1944, and arrived at Milne Bay on 25 February, where it assisted the 411th Engineer Base Shop Battalion in the operation of the LCM assembly plant there. It followed it to Batangas on 17 June 1945. It returned to the Los Angeles Port of Embarkation on 25 January 1945, and was inactivated at Camp Anza, California, two days later.[94][98]

Notes

[edit]

References

[edit]

Further reading

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia
from Grokipedia
The Engineer Special Brigades (ESBs) were specialized amphibious units of the Corps of Engineers, established during to operate , transport assault troops from ship to shore, and provide essential beach support and logistical services during major invasions. Initially designated as Engineer Amphibian Brigades, six such units—the 1st, 2nd, 3rd, 4th, 5th, and 6th—were activated between and , each comprising approximately 7,340 personnel equipped with over 500 (including LCMs and LCVPs) and 104 support vessels to facilitate shore-to-shore operations. These brigades addressed critical shortages in amphibious capabilities, as the U.S. Navy initially resisted involvement but ultimately integrated their efforts due to overwhelming demands. Authorized by the on 9 May 1942, the ESBs originated from the Amphibian Command, with the first training center activated on 5 June 1942 at on , . The 1st ESB was activated on 15 June 1942, followed by the 2nd on 20 June 1942, and the others in subsequent months; all were redesignated as "Special" Brigades in 1943 to reflect their evolving multi-theater roles. Organizationally, each brigade included three boat and shore regiments, boat maintenance companies, and support elements, trained to unload supplies, clear obstacles, and protect advancing under fire. Their creation marked a pivotal in , shifting engineers from traditional to combat-oriented . In the European Theater of Operations (ETO), the ESBs were instrumental in the Normandy invasion on 6 June 1944 (D-Day). The 1st ESB supported the U.S. VII Corps at , managing the landing of over 23,000 troops and 1,800 vehicles on while clearing underwater obstacles amid heavy fire. The 5th ESB, attached to V Corps, handled the chaotic assault, where its personnel suffered heavy casualties but succeeded in establishing supply lines that enabled the breakout from the beachhead. The 1st ESB later redeployed to the Pacific for the Okinawa campaign in April 1945, demonstrating the brigades' flexibility across theaters. In the Pacific Theater, the 2nd, 3rd, and 4th ESBs operated under General , conducting 148 amphibious landings from 1943 to 1945, including key operations in (such as the Hollandia assault in April 1944) and the ( and in 1944–1945). These brigades' expertise in tropical environments and rapid beach establishment was vital to MacArthur's "I shall return" strategy, overcoming logistical challenges like monsoons and enemy defenses. By war's end, the ESBs had revolutionized amphibious engineering, paving the way for modern joint Army-Navy operations.

Formation and Development

Concept

The Engineer Special Brigades were specialized units of the U.S. Army Corps of Engineers formed during to conduct amphibious assaults, encompassing the operation of , clearance of beach obstacles, and management of shore party operations to facilitate the rapid deployment and sustainment of assault forces. These brigades addressed the critical need for integrated engineer support in large-scale invasions, where traditional engineer units lacked the specialized and for waterborne operations against defended shores. Initially designated as Engineer Amphibian Brigades in 1942, they emerged in response to the exigencies of global conflict, particularly after U.S. entry into the war following . Authorized by the on 9 May 1942, the concept drew from pre-war U.S. Marine Corps amphibious doctrine, Japanese successes in 1941–42, and British Combined Operations experiences like the in 1942, which highlighted the necessity for dedicated units to coordinate ship-to-shore movements and establish secure beachheads, prompting the U.S. War Department to prioritize amphibious engineer capabilities. By mid-1942, as planning accelerated for operations like in , the lack of dedicated engineer support for handling and sustaining divisions over beaches became evident, leading to the activation of the first brigade on 15 June 1942, under the Engineer Amphibian Command. This initiative treated amphibious landings as engineered river crossings on a grand scale, integrating Army engineers with naval elements to bypass fortified ports. A key innovation was the organizational fusion of boat regiments, responsible for crewing and maintaining such as LCVPs, LCMs, and DUKWs, with shore regiments focused on beach , including obstacle , supply distribution, and exit construction to enable swift troop movement inland. This structure evolved to support comprehensive assault support, with each brigade scaling to approximately 7,500 personnel and up to 550 , capable of unloading thousands of tons of supplies and reinforcing multiple divisions in the initial phases of an invasion. The brigades' redesignation to Engineer Special Brigades in 1943 reflected a shift toward shore-centric roles as the assumed more watercraft responsibilities, while the Amphibious Training Center at Camp Gordon Johnston refined these tactics through realistic exercises.

Amphibious Training Center

The Amphibious Training Center was established on 10 June 1942 at , , under the Engineer Amphibian Command (renamed Amphibious Training Command), activated earlier that month to address the urgent need for specialized amphibious capabilities in response to evolving warfare demands. This facility marked the U.S. Army's initial dedicated effort to prepare engineer personnel for large-scale shore-to-shore operations, building on the foundational concept of amphibious engineering by integrating technical skills with combat readiness. The training curriculum emphasized practical, hands-on instruction tailored to engineer roles in amphibious assaults, including the operation of such as LCVPs () and DUKWs (amphibious trucks), as well as techniques for removing beach obstacles like mines, tetrahedrons, and under simulated combat conditions. Personnel also underwent rigorous drills in under fire, encompassing supply distribution, vehicle recovery from surf zones, and establishing temporary beachheads to support follow-on forces. Simulated assaults formed a core component, replicating night landings, joint maneuvers with naval support, and coordination with units to ensure seamless execution of engineer tasks amid chaos. As the war progressed, the center relocated to Camp Gordon Johnston, , in November 1942 to accommodate growing demand and incorporate more advanced facilities for waterborne operations, while joint Army- exercises occurred at Navy sites like Little Creek, Virginia. These efforts facilitated through shared scenarios involving , air coordination, and multi-service landings, which were critical for refining tactics ahead of major operations. Specialized schools emerged at these sites, focusing on roles like coxswains for craft handling and shore party teams for beach organization and , enhancing the precision of amphibious engineer units. By 1944, the Amphibious Training Center programs had trained tens of thousands of personnel, significantly bolstering the Army's amphibious engineering capacity and contributing to the success of subsequent invasions. This scale of preparation, achieved through iterative improvements in and facilities, underscored the center's role in transforming raw recruits into proficient teams capable of overcoming the complex challenges of contested landings.

Engineer Amphibian Command

Establishment and Purpose

Following authorization by the on 9 May 1942 and the activation of the first training center on 5 June 1942, the Engineer Amphibian Command (EAC) was officially activated on 13 June 1942 at , , by the War Department to serve as the central authority for amphibious engineer operations during . Under the oversight of Eugene Reybold, the Chief of Engineers, the command was led by Daniel Noce, with Colonel serving as . This activation came amid the rapid U.S. military buildup following entry into the war, addressing the urgent need for specialized forces capable of supporting large-scale invasions. The primary purpose of the EAC was to centralize the planning, training, and deployment of amphibian brigades, ensuring coordinated joint operations with the for beach assaults and logistics. It focused on developing doctrine, organization, and equipment tailored to , including the unloading of troops and supplies from ships to shore under combat conditions. The command reported to the , under the oversight of the Chief of Engineers, facilitating the integration of engineer units into broader Army strategies for operations in both the European and Pacific theaters. Coordination with the was essential, as the EAC managed Army-controlled crews while aligning with naval assets for assaults, resolving inter-service tensions over control of boat and shore parties. Structurally, the EAC incorporated training centers at and adjacent sites like , where it oversaw the activation of initial brigades, beginning with the 1st Engineer Amphibian Brigade (later redesignated the 1st Engineer Special Brigade) comprising approximately 7,000 personnel. Over time, it directed the formation of six such brigades, emphasizing specialized instruction in obstacle clearance, vehicle operation on beaches, and rapid construction of exit roads. The command's framework allowed for scalable expansion, integrating engineer replacement training from facilities like and . Early challenges included the command's rapid establishment within an 85-day window from 18 May to 10 August 1942, driven by the demands of U.S. involvement in WWII and the need to prepare for major operations like in Europe and Pacific island-hopping campaigns. Equipment shortages and the lack of established amphibious doctrine posed significant hurdles, requiring innovative adaptations in and to build effective forces quickly. Despite these obstacles, the EAC's focused efforts laid the groundwork for successful joint amphibious assaults.

Renaming and Administrative Evolution

In May 1943, the U.S. Army redesignated its Engineer Amphibian Brigades as Engineer Special Brigades to better reflect their evolving responsibilities, which extended beyond initial amphibious assault roles to include broader special engineering operations such as shore party support and in diverse theaters. This change, effective around 10 May for units like the 4th Brigade, allowed the brigades to adapt to varying mission requirements without the strict "amphibian" label, emphasizing versatility in equipment handling and beach organization. Administratively, the Engineer Amphibian Command underwent significant shifts in 1943, including the transfer of key elements, such as the 1st Engineer Amphibian Brigade (later the 1st Engineer Special Brigade), to the European Theater of Operations (ETO) for integration into Allied planning efforts. This move aligned the command's resources with multinational strategies, particularly for operations like the Normandy invasion, where Army engineers coordinated with British and American naval forces to refine amphibious doctrines and logistics. By late 1943, the command had streamlined its structure to support both European and Pacific commitments, detaching boat assets to the Navy in the ETO while retaining operational control over shore-based units. The command's evolution peaked by 1944, when it oversaw six active Engineer Special Brigades, each comprising approximately 7,300 personnel organized into boat and shore regiments for scalable deployments. This expansion enabled flexible assignments, with brigades like the 2nd and 3rd directed to the Pacific for sustained amphibious support, while the 1st, 5th, and 6th focused on ETO specialized tasks, including D-Day beach clearance and supply establishment. Following the war's end in 1945, the command's role diminished rapidly due to and the transfer of amphibious functions to other services, leading to its full inactivation in 1946.

1st Engineer Special Brigade

Organization

The 1st Engineer Special Brigade was activated on 15 June 1942 at , , as the 1st Engineer Amphibian Brigade under the Engineer Amphibian Command. It was redesignated as the 1st Engineer Special Brigade on 10 to reflect its expanded roles. Assigned initially to the European Theater but with flexibility for multi-theater operations, the brigade was structured for amphibious assaults, including operation of and beach support. The brigade's core included three engineer boat and shore regiments—such as the 531st Engineer Shore Regiment—each comprising boat and shore battalions for landing operations and beach clearance, along with boat maintenance companies, , ordnance, medical, and signal support units. Additional attached elements for specific operations included amphibian truck battalions, companies, and chemical units. Overall strength was approximately 7,340 personnel, equipped with over 500 and support vessels. For the Normandy invasion, the brigade incorporated temporary attachments like the 3206th and 3207th Quartermaster Service Companies for logistics and the 261st Medical Battalion for . This organization evolved from earlier amphibian brigades, emphasizing integrated Army-Navy amphibious engineering.

Campaigns and Honors

The 1st Engineer Special Brigade played a pivotal role in the D-Day landings on 6 at , where its units cleared underwater and beach obstacles under fire, constructed five principal exit roads from the beach to the bluffs, and established initial supply dumps for ammunition, fuel, and other materiel to support the follow-on forces of VII . By nightfall, the brigade had removed wrecked vehicles and mines from the beach sectors, surfaced the lateral beach road with gravel for improved trafficability, and erected a 1,000-foot to facilitate offloading. These efforts enabled the rapid disembarkation of over 23,000 troops and 1,800 vehicles by the end of the day, marking a key success in the Utah Beach assault compared to other sectors. The brigade suffered 21 and 96 wounded on D-Day alone. Following the initial landings, the brigade operated as Utah Beach Command until 23 October 1944, managing the expansion of port facilities, road networks, and logistics infrastructure across the to sustain the Allied breakout from . This included dredging channels, installing additional causeways and piers, and coordinating the discharge of millions of tons of supplies, which were essential for the subsequent advances into northern during the summer and fall of 1944. In late 1944, the brigade redeployed to the Pacific Theater, participating in the invasion of Okinawa in April 1945 under the U.S. Tenth Army. Its engineers supported beach assaults, obstacle clearance, and logistics for the campaign against Japanese forces, contributing to the island's capture by June 1945. The brigade earned campaign streamers for its service: and Northern France in the European Theater, and Ryukyus (Okinawa) in the Pacific Theater. Individual units within the brigade received numerous decorations, including the Distinguished Service Cross and Silver Stars for acts of valor on D-Day.

2nd Engineer Special Brigade

Organization

The 2nd Special Brigade was activated on 20 June 1942 at , , initially as the 2nd Engineer Amphibian Brigade under the Engineer Amphibian Command. Commanded by Colonel William F. Heavey (promoted to brigadier general on 10 September 1942), it underwent training at and later at Camp Carrabelle, Florida, before moving to , . On 1 October 1942, it was reorganized, with the 532nd and 592nd becoming Engineer Amphibian Regiments and the 542nd Engineer Amphibian Regiment formed; these three regiments formed the core, supported by boat maintenance battalions, medical units, and shore companies. The brigade's strength was approximately 7,000 personnel, equipped for amphibious operations including landing craft operation, beach clearance, and logistics support. Redesignated as the 2nd Special Brigade in 1943, it deployed to in January–February 1943 for further preparation in the Pacific Theater.

World War II Campaigns

The 2nd Engineer Special Brigade's World War II campaigns in the Pacific Theater began with deployments to New Guinea in 1943, where it supported amphibious assaults critical to General Douglas MacArthur's island-hopping strategy. In June 1943, elements of the brigade participated in the initial combat operation at Nassau Bay, using landing craft to deliver troops despite heavy surf and Japanese opposition, marking the unit's first exposure to battle conditions. By September 1943, the brigade facilitated landings at Lae and Finschhafen, transporting over 12,000 Australian troops and 10,000 tons of cargo while enduring enemy air raids and coral reef hazards that damaged multiple vessels. The Hollandia operation in April 1944 saw the 532nd and 542nd Engineer Boat and Shore Regiments execute landings across shallow beaches and mangrove swamps, capturing key airstrips near Lake Sentani with minimal initial resistance, though a massive supply fire caused significant losses estimated at $8 million. At Biak in May 1944, the brigade's craft operated under intense Japanese cave defenses and air attacks, losing 47 of 54 LVTs to reefs and fire by mid-June, yet securing vital airstrips like Mokmer through persistent shore party efforts. The brigade's role expanded in the Philippines with the Leyte invasion on October 20, 1944, where it served as the primary shore party for the U.S. Sixth Army, managing operations across White, Red, and Green Beaches amid swampy terrain and typhoon-force winds reaching 80 knots. Under relentless Japanese air raids that sank or damaged six LSTs, the brigade unloaded over 100,000 tons of supplies in the first six days, including 63,125 tons at White Beach alone, while evacuating casualties and supporting the advance to , where engineers completed an airstrip in one week. Innovations in combat repairs proved essential, such as using life preservers to patch damaged LCVPs and underwater propeller changes on Yellow Beach, enabling rapid return of vessels to service despite ongoing fire. These efforts sustained the and Divisions, with the 592nd Boat and Shore earning a Presidential Unit Citation for actions from November 5 to December 10, 1944, during follow-on operations like . In 1945, the brigade provided support for the Borneo campaigns, beginning with landings at Puerto Princesa on Palawan Island on February 28, where the 532nd Regiment established port facilities and an air base to control the South China Sea approaches, facilitating bombings of Borneo and mainland China. Subsequent operations included Brunei Bay and Balikpapan in May and July, respectively, where brigade elements transported Australian troops and supplies through uncharted waters and rough seas, losing two LCMs to weather but securing beachheads for the Allied advance. Jungle terrain, persistent Japanese resistance, and logistical strains from dispersed islands posed ongoing challenges, yet the brigade's craft operations under fire ensured timely reinforcements. For its service in the Philippines and Borneo, the 2nd Engineer Special Brigade received the Philippine Republic Presidential Unit Citation, recognizing extraordinary contributions to liberating the region. Throughout these Pacific engagements from 1943 to 1945, the brigade suffered approximately 800 casualties, including 84 killed in action and over 500 wounded, while pioneering field repairs like improvised wooden bearings from local ironwood to maintain fleet readiness in austere conditions.

Korean War Service

The 2nd Engineer Special Brigade was reactivated in August 1950 at , Washington, initially operating under a provisional status with a strength of 8,400 but only about 1,200 personnel available, before deploying to support operations in Korea. By early 1951, it achieved full brigade status while stationed in the region, drawing on its pre-war Pacific organization for amphibious expertise. During the Korean War, the brigade played a pivotal role in amphibious operations, reinforced by boat companies such as elements of the 532nd Engineer Boat and Shore Regiment, which operated (LCMs), DUKWs, and cranes to support X Corps logistics. Its most notable contribution came during the Inchon landing on September 15, 1950, where it facilitated tidal assaults using LSTs and other vessels to disembark the and 7th Infantry Division, followed by port operations that discharged critical supplies amid extreme tidal ranges of up to 30 feet. Later that year, on December 9–24, 1950, the brigade orchestrated the , an amphibious withdrawal that transported over 100,000 personnel—including X Corps troops and Korean civilians—via coordinated shore party efforts, achieving daily cargo discharges of up to 5,442 tons while destroying excess supplies to deny them to advancing Chinese forces. The brigade remained active in Korea through the armistice, providing ongoing port and construction support until its deactivation in 1955, marking the end of Engineer Special Brigade operations. For its service, particularly at Inchon and Hungnam, it received the Republic of Korea Presidential Unit Citation, along with U.S. campaign credits for six major phases of the conflict. As the final ESB to see active combat, its experiences in Korea shaped U.S. Cold War amphibious doctrine, emphasizing rapid port seizure and evacuation capabilities in limited-resource environments.

3rd Engineer Special Brigade

Organization

The 3rd Engineer Special Brigade was activated on 6 August 1942 at , , as the 3rd Engineer Amphibian Brigade. It was redesignated as the 3rd Engineer Special Brigade on 25 May 1943 at , . Commanded by Depue Ogden for most of the war, the brigade was assigned to the Southwest Pacific Area under General . The brigade consisted of brigade headquarters and headquarters company, a medical detachment, three engineer boat and shore regiments (533rd, 543rd, and 593rd), and the 563rd Engineer Boat Maintenance Battalion (including headquarters, maintenance companies 1461st–1463rd, heavy equipment shop company 1571st, and parts supply platoon 1763rd). Support units included the 263rd Medical Battalion, 163rd Ordnance Maintenance Company, 198th Quartermaster Gasoline Supply Company, 288th Signal Company, 693rd Truck Company, 3499th Ordnance Medium Maintenance Company, and the 417th Army Service Forces Band. With approximately 7,000 personnel and over 500 landing craft, the brigade focused on amphibious assaults, shore-to-shore transport, beach clearance, and logistics support in tropical environments.

Campaigns and Honors

The 3rd Engineer Special Brigade deployed to the Southwest Pacific in late 1943, participating in numerous amphibious operations during the from 1944. Key actions included landings at (January 1944), where the 533rd Engineer Boat and Shore Regiment unloaded 35 Liberty ships and peaked at 2,110 tons of cargo per day; Yalau and Talasea (March 1944); , Wakde (May 1944), Noemfoor (July 1944), and Sansapor (July–August 1944), supporting the advance of U.S. Army divisions against Japanese forces. The brigade's engineers constructed jetties, roads, and facilities under challenging conditions, including enemy fire and monsoons, facilitating the buildup for further offensives. In 1945, the brigade supported MacArthur's return to the , landing at (9 January 1945) with the 533rd and 543rd Regiments; Zamboanga on (March 1945); and subsequent operations on , , and . These efforts enabled the rapid discharge of millions of tons of supplies, crucial for the liberation of and other islands. After Japan's surrender, the brigade participated in the occupation, landing at Wakayama (27 September 1945) and supporting demobilization. The brigade was inactivated on 22 December 1945 upon return to the . The 3rd Engineer Special Brigade earned four campaign streamers for World War II service: New Guinea, Leyte, Luzon, and Southern Philippines. It suffered casualties during combat operations, with individual units receiving decorations for valor in amphibious assaults.

4th Engineer Special Brigade

Organization

The 4th Engineer Special Brigade was activated on 1 February 1943 at , , as the 4th Engineer Amphibian Brigade. It was redesignated as the 4th Engineer Special Brigade on 10 May 1943 at , , and moved to Camp Gordon Johnston, Florida, in September 1943 for further training. The brigade departed the United States from Camp Stoneman, , on 28 April 1944, arriving at Oro Bay, , on 18 May 1944, where its headquarters opened on 23 May. The brigade consisted of three Engineer Boat and Shore Regiments—the 534th, 544th, and 594th—along with the 564th Engineer Boat Maintenance Battalion for vessel repair and maintenance. Support units included the 264th Medical Battalion, 164th Ordnance Maintenance Company, 199th Gasoline Supply Company, 289th Signal Company, 694th Truck Company, 3492nd Ordnance Medium Maintenance Company, and the 4th Engineer Amphibian Brigade Band. Commanded initially by Henry Hutchings, Jr., who was promoted to on 15 , the brigade's approximately 7,000 personnel were equipped for amphibious operations, including landing craft operation, beach clearance, and logistical support in tropical environments. It was assigned to the Southwest Pacific Area under General .

Campaigns and Honors

The 4th Engineer Special Brigade participated in amphibious assaults in the Pacific Theater, supporting General MacArthur's island-hopping campaign. It arrived in in May 1944 and contributed to operations there, earning credit for the . Key operations included the assault on Morotai Island on 15 September 1944, where brigade elements landed troops and vehicles, cleared beaches, and established supply lines despite challenging terrain and weather, facilitating the advance toward the Philippines. The brigade's most significant action was the Lingayen Gulf landings on 9 January 1945 during the Luzon campaign, supporting the U.S. Sixth Army's invasion of Japanese-held Luzon. Its boat regiments ferried assault waves ashore, while shore units constructed exits, unloaded supplies, and built infrastructure to sustain the drive on Manila. These efforts were crucial in overcoming logistical hurdles in the Southwest Pacific, including monsoons and enemy defenses. The brigade earned two campaign streamers for service: and . It was inactivated in on 15 April 1946.

5th Engineer Special Brigade

Organization

The 5th Engineer Special Brigade was formed on November 12, 1943, in , , from the Headquarters and Headquarters Company of the 1119th Engineer Combat Group. It was activated in the and assigned to the European Theater of Operations, supporting amphibious assaults with a focus on boat and shore operations similar to earlier ESBs. The brigade's core composition included the 37th and 348th Engineer Combat Battalions for obstacle clearance, , and combat , along with and service battalions for , and the 302nd Company for security. It incorporated provisional boat teams and support elements, with an overall strength of approximately 10,000 personnel across headquarters, medical, ordnance, and signal units. For the invasion, it received attachments such as service companies to handle beach and supply distribution.

Campaigns and Honors

The 5th Engineer Special Brigade played a pivotal role in the D-Day landings on June 6, 1944, at , supporting U.S. V Corps. Its units, including the 37th Engineer Combat Battalion, were among the first to land, clearing underwater and beach obstacles under intense fire, constructing exit roads, and establishing supply dumps despite heavy casualties that hindered initial progress. By supporting the chaotic assault, the brigade enabled the eventual breakout from the beachhead, managing the discharge of troops, vehicles, and supplies amid wrecked equipment and enemy defenses. Following the landings, the brigade operated until November 19, 1944, expanding port facilities, road networks, and logistics infrastructure to sustain Allied advances in and northern . From January 4, 1945, elements supported port rehabilitation at , facilitating supply lines for the final offensives, including dredging channels and repairing infrastructure. The brigade earned three campaign streamers for its service in the : , Northern France, and . It suffered heavy casualties during operations in northwest , with a memorial at honoring 80 comrades killed. Individual units received decorations, including the Distinguished Service Cross and Silver Stars for valor on D-Day.

6th Engineer Special Brigade

Organization

The 6th Engineer Special Brigade was redesignated and activated on 15 May 1944 in the from the Headquarters and Headquarters Company of the 1116th Engineer Combat Group, which had arrived in the previous January. Assigned to the U.S. First Army in the European Theater of Operations, it served as a late-war amphibious support unit emphasizing shore-based operations rather than integrated boat regiments found in earlier brigades. The brigade's core composition included three engineer combat battalions—the 147th, 149th, and 203rd—tasked with obstacle clearance, , and combat engineering duties, supplemented by the 1058th Engineer Port and Repair Group for port rehabilitation and logistics infrastructure. As a shore-based formation, it relied on provisional teams drawn from attached naval and units for initial wave support, without dedicated amphibian regiments. The overall strength totaled approximately 6,600 core personnel, expanding to over 10,000 with attachments, including headquarters elements, medical, ordnance, quartermaster, and signal support units. For the Normandy invasion, the brigade received temporary attachment of the 3206th and 3207th Service Companies to manage beach logistics, vehicle salvage, and supply distribution. Designed as an evolution of the 5th Engineer Special Brigade's structure, it incorporated enhanced capabilities, with provisions for attached aviation battalions to expedite airfield construction in liberated areas.

Campaigns and Honors

The 6th Engineer Special Brigade played a pivotal role in the D-Day landings on 6 June 1944 at , supporting V Corps by clearing underwater and beach obstacles under intense enemy fire as part of gap assault teams. Its units, including the 147th, 149th, and 203rd Combat Battalions, worked alongside naval combat demolition units to create passages through obstacles in the western sectors (Charlie, Dog, Easy Green), despite suffering heavy casualties—estimated at around 40% in some teams by day's end. These efforts were crucial in establishing initial beach exits and supply dumps, enabling the buildup of forces amid the chaotic assault. Following the initial landings, the brigade managed operations until 19 , expanding the beachhead through construction of roads, dumps, and port facilities, including support for the Mulberry artificial harbor. This included clearing minefields, processing prisoners, and coordinating the discharge of supplies essential for the Allied advance into northern . From , elements defended the Cotentin Peninsula's west coast and contributed to in the Advance Section, Communications Zone. In early 1945, the brigade supported bridging and port rehabilitation during the campaign and final offensives in , including clearance at after the Estuary was secured. The brigade earned four campaign streamers for its service in the European Theater: , Northern France, , and . It suffered heavy casualties during operations in northwest Europe, particularly on D-Day, reflecting the hazardous conditions of beach clearance and construction under artillery and small-arms fire. Individual units within the brigade received numerous decorations, including the Distinguished Service Cross and Silver Stars for acts of valor during the invasion.

Other Amphibian Engineer Units

Provisional Engineer Special Brigade Group

The Provisional Engineer Special Brigade Group was formed on 17 February 1944 at Penllergaer, , as a temporary organization comprising the 5th and 6th Engineer Special Brigades to support the Normandy invasion. Under the command of William M. Hoge, it coordinated amphibious engineering efforts for the assault on during on 6 June 1944. The group included three battalion beach groups from the 5th and 6th ESBs, focusing on operations, obstacle clearance, and logistical support amid heavy resistance. With a strength of approximately 14,000 personnel, the group managed the chaotic landings at , where it suffered significant casualties but helped establish beachheads by unloading troops, vehicles, and supplies under fire. Its role was pivotal in sustaining the V Corps advance, including causeway construction and supply coordination. Following the Normandy campaign, on 26 June 1944, the group was redesignated as the Command to oversee ongoing beach operations and artificial harbor (Mulberry) maintenance. The provisional structure was disbanded later in 1944 as the ESBs operated independently. The group's creation addressed the need for unified command in the complex D-Day assault, testing and refining amphibious doctrines in combat. Lessons from its operations, such as improved beach organization and , influenced subsequent Allied invasions.

540th Engineer Combat Group

The 540th Engineer Combat Group was formed on 15 February 1945 through the reorganization of the 540th Engineer Combat Regiment in the European Theater of Operations. The regiment originated as the 540th Engineer Shore Regiment, activated on 11 September 1942 at , , with an initial strength including regimental headquarters, a , and three battalions. Shortly after activation, the third battalion was disbanded and its personnel transferred to the 36th Engineer Combat Regiment, leaving the unit with two battalions focused on amphibious tasks. On 25 October 1942, while staging at , , and en route to deployment, the regiment was redesignated the 540th Engineer Combat Regiment, shifting emphasis toward combat roles in support of Allied invasions. Upon redesignation as a group in early 1945, the 540th consisted of headquarters elements and two subordinate battalions—the 2832nd and 2833rd Engineer Battalions—redesignated from the regiment's 1st and 2nd Battalions, respectively. These battalions specialized in of obstacles, of roads and bridges, mine clearance, and rapid infrastructure development to enable and armored advances. The group's structure emphasized mobility and versatility in contested environments, integrating with larger formations for both amphibious and overland operations. Throughout , the 540th provided essential engineering support across multiple theaters, beginning with the North African landing at on 8 November 1942, followed by amphibious assaults in at Licata and in July 1943, the landings in September 1943, and the Anzio beachhead in January 1944. Later operations included the invasion of at Drammont in August 1944 and River crossings in March 1945 supporting the Third Infantry Division. The group was inactivated in July 1945 at Rheims, France, following the Allied victory in Europe.

411th and 692nd Engineer Special Shop Battalions

The 411th and 692nd Engineer Special Shop Battalions served as critical maintenance units for the U.S. Army's amphibious operations during , functioning as mobile workshops equipped to perform hull repairs, power plant overhauls, and assembly of in both forward areas and rear bases. These battalions addressed the high wear on amphibious vehicles from saltwater exposure and rough beach operations, enabling sustained logistical support for Engineer Special Brigades by reducing downtime on essential craft like LCVPs and LCMs. The 411th Engineer Base Shop Battalion was activated on 17 August 1942 at Camp Edwards, Massachusetts, with initial training focused on boat repair and assembly techniques. A composite platoon deployed to England in April 1943 to support Exercise Tiger, the rehearsal for the Normandy landings. The full unit moved to Fort Ord, California, in late November 1942, before arriving in Cairns, Australia, in January 1943. There, it operated a 450-foot boat assembly plant, producing the first LCVP on 7 April 1943 and scaling to seven per day, alongside assembling 21 LCMs in December 1943, 90 in January 1944, 120 in February 1944, and over 150 monthly thereafter to equip Pacific invasions. The battalion also handled repairs for landing craft damaged in operations at Milne Bay, New Guinea, and Biak Island, with elements attached to the 2nd Engineer Special Brigade for Southwest Pacific campaigns. Its innovations included converting machinists to carpenters and electricians for rapid plant setup and sectionalizing LCM components for efficient overseas shipment, minimizing logistical burdens. Activated on 20 May 1943 at , —the last unit to train there before closing Camp Bradford in December 1943—the 692nd Engineer Base Shop Battalion was redesignated the 692nd Engineer Special Shop Battalion in August 1943. It specialized in higher-echelon maintenance, including engine overhauls and salvage operations for amphibious craft, deploying first to New Orleans, , in December 1943 for staging. In the Pacific Theater, the battalion supported the 2nd and 3rd Engineer Special Brigades with forward-area repairs during landings at Morotai in 1944 and in 1945, ensuring operational readiness of amid intense use. Its mobile facilities allowed on-site hull and propulsion work, vital for sustaining brigade flotillas in remote island-hopping campaigns. Both battalions shared a core mission of delivering depot-level support to amphibious units, operating self-contained workshops that traveled with brigades to perform overhauls on saltwater-stressed equipment. They were inactivated in January 1946 upon returning to the United States, as the Army demobilized its amphibious engineer forces at the war's end.

References

Add your contribution
Related Hubs
User Avatar
No comments yet.