Hubbry Logo
FoamcoreFoamcoreMain
Open search
Foamcore
Community hub
Foamcore
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Foamcore
Foamcore
Foamcore
View on Wikipedia
from Wikipedia
Sheet of foamboard

Foamcore, foam board, or paper-faced foam board is a lightweight and easily cut material used for mounting of photographic prints, as backing for picture framing, for making scale models, and in painting. It consists of a board of polystyrene foam clad with an outer facing of paper on either side, typically white clay-coated paper or brown kraft paper.

History

[edit]

The original white foamcore board was made in 1⁄8 and 3⁄16 inch (3.2 and 4.8 mm) thicknesses for the graphic arts industry by Monsanto Company under the trade name "Fome-Cor®" starting in 1961.[1]

Construction, variants and composition

[edit]

The surface of the regular board, like many other types of paper, is slightly acidic. However, for modern archival picture framing and art mounting purposes it can be produced in a neutral, acid-free version with a buffered surface paper, in a wide range of sizes and thicknesses.

Foam-cored materials are also now available with a cladding of solid (non-foamed) polystyrene and other rigid plastic sheeting, some with a textured finish.

Foamcore does not adhere well to some glues, such as superglue, and certain types of paint. The foam tends to melt away and dissolve.[citation needed] Some glue works well in casual settings, however, the water in the glue can warp the fibers in the outer layers. Best results are typically obtained from higher-end spray adhesives. A hot glue gun can be used as a substitute, although the high viscosity of hot glues can affect finished projects in the form of board warping, bubbles, or other unsightly blemishes.

Self-adhesive foam boards, intended for art and document mounting are also available, though these can be very tricky to use properly; this is because the glue sets very fast. It is considered cheaper to buy plain foam board and use re-positionable spray mount adhesive.

Specialty constructions have been developed for engineering uses.[2][3]

Uses

[edit]
An architectural model made from foamcore on a styrofoam base

Foamcore is commonly used to produce architectural models, prototype small objects and to produce patterns for casting. Scenery for scale model displays, dioramas, and computer games are often produced by hobbyists from foamcore.

Photos on a foamcore backing

Foamcore is also often used by photographers as a reflector to bounce light, in the design industry to mount presentations of new products, and in picture framing as a backing material; the latter use includes some archival picture framing methods, which utilize the acid-free versions of the material. Another use is with aero-modellers for building radio-controlled aircraft.

Researchers at the University of Manchester created their Giant Foamboard Quadcopter (GFQ) claimed to be the largest possible Civil Aviation Authority licensed drone with an all-up weight (UWT) just below the maximum of 25 kg (55 lb).[4]

See also

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Foamcore

View on Grokipedia
from Grokipedia
Foamcore, also known as foam board or foam core board, is a lightweight and rigid sheet material consisting of a central core of extruded foam sandwiched between two thin outer layers, typically of clay-coated or high-impact . This three-layer structure provides dimensional stability, ease of fabrication, and compatibility with printing and mounting applications, making it a staple in and visual communications. Commonly available in thicknesses from 3/16 inch to 1 inch and in standard sheet sizes up to 4 feet by 8 feet, foamcore is valued for its low cost, dent resistance (depending on the grade), and ability to accept inks, paints, and adhesives without warping. Variations include economy grades with paper facings for short-term indoor use and premium options like FOME-COR® or GATORFOAM® with reinforced surfaces for enhanced durability in exhibits or signage. Its properties—such as being easily cut with a , lightweight for portability, and recyclable in some forms—support diverse applications including point-of-purchase (POP) displays, architectural models, photo framing, graphics, and educational props. While primarily used indoors due to sensitivity to moisture and UV exposure, foamcore's versatility has made it indispensable in creative and commercial settings since its introduction in the mid-20th century.

History

Invention and Early Development

Foamcore, a lightweight consisting of a foam core sandwiched between paper facings, was developed by the Chemical Company in the early as a durable and easily workable substrate for mounting in the graphic arts industry. The process was pioneered by engineer Ardash A. Aykanian, who joined in 1951 and specialized in plastics , inventing key techniques including the "Aykanian die" for producing uniform foam sheets. This innovation addressed the limitations of traditional wood or heavy mounting boards, which were prone to warping and difficult to cut precisely amid the post-World War II boom in printing technologies and visual displays that demanded versatile, lightweight materials. Initial prototypes focused on extrusion methods to achieve consistent foam density, using polystyrene resin expanded with blowing agents to form a rigid core approximately 1/8 inch (3 mm) or 3/16 inch (5 mm) thick. Aykanian's work culminated in patents such as US 3,062,698 (1962), which detailed the lamination of paper and textiles to foamed thermoplastic resin forms, enabling the bonding of clay-coated paper facings to the extruded polystyrene core under controlled heat and pressure for enhanced rigidity and surface quality. These early developments emphasized uniform cell structure in the foam to ensure the board's stability for cutting, mounting photographs, and creating display prototypes without the weight or fragility of prior alternatives. By 1957, Monsanto commercialized the material under the brand Fome-Cor, marking its formal entry into the market as a practical solution for the evolving needs of graphic designers and printers.

Commercialization and Evolution

The commercialization of foamcore began with Monsanto Company's introduction of Fome-Cor in 1957, the first commercial product of its kind designed specifically for the graphic arts industry, where it quickly became valued for mounting photographs and artwork due to its lightweight rigidity and ease of cutting. Originally developed from research in the 1950s for visual displays and framing supports, Fome-Cor came to dominate the market in those areas. During the and , Fome-Cor experienced substantial market growth as demand surged in , mounting, and related fields, driven by the material's versatility and 's expansion of product lines to meet broader creative and commercial needs. Sheet sizes evolved to accommodate larger applications, reaching standard dimensions like 4x8 feet that supported its integration into point-of-purchase displays and temporary exhibits. By the , had extended Fome-Cor's availability to international markets, aligning with the company's global outreach in specialty materials. Key milestones in the late 20th century included Fome-Cor's deepening adoption in displays by the , where its printability and portability enhanced booth graphics and pop-up structures. In 1993, sold the Fome-Cor business to Company, marking a shift in ownership while preserving its production legacy. In the early , the business was acquired by 3A Composites, which continues to produce Fome-Cor. Throughout this period, production scales advanced through automated cladding processes, enabling efficient of the foam core with facings and supporting higher volumes for diverse industries.

Materials and Construction

Core Composition

The core of foamcore consists primarily of extruded (XPS) foam, characterized by its closed-cell structure that enhances rigidity and moisture resistance. This foam is derived from the of styrene monomer, a process involving free radical chain reactions to form a , which is then extruded under and pressure with a to create the cellular structure. XPS foam in foamcore typically exhibits a range of 28–45 kg/m³, balancing structural with minimal addition to the overall board. This ensures the core remains lightweight, contributing to a total board of approximately 0.13 lb/ft² for standard 3/16-inch thicknesses, while facilitating easy cutting and assembly with reduced risk of warping during fabrication. In terms of , the XPS core demonstrates excellent resistance to inorganic acids and weak bases, as well as good resistance to strong bases, making it suitable for environments with mild chemical exposure. However, it shows poor resistance to organic solvents such as acetone, which can cause dissolution or degradation of the structure.

Facing and Assembly

Foamcore boards feature outer facings typically composed of bright , double clay-coated for a smooth, printable surface or brown for a more economical, uncoated option, both of which protect the extruded core and facilitate graphic applications. These facings are adhered to the core using hot-melt adhesives, which provide strong, quick-setting bonds suitable for porous foam substrates, or starch-based glues, which offer a water-resistant interface in sandwich composites with paper skins. The assembly process begins with the continuous of the foam core to form a uniform sheet, followed by inline where the pre-cut or rolled facings are applied to both sides under controlled pressure for seamless adhesion without voids or bubbles. This inline method ensures consistent bonding across large production runs, enhancing the board's structural integrity. Variations in core thickness during assembly yield standard board thicknesses of 3 mm, 5 mm, and 10 mm, with thicker profiles providing greater rigidity for demanding display uses while maintaining lightweight properties. The selected adhesives confer resistance to during routine handling and transport, with full curing typically requiring 24 to 48 hours to achieve optimal bond strength.

Physical Properties

Mechanical Characteristics

Foamcore's core provides typically ranging from 25 to 40 psi, allowing it to support lightweight prints and under normal handling. This rigidity suits temporary display structures while keeping the board lightweight. Foamcore can be easily scored and cut using utility knives or mat cutters, producing minimal dust compared to denser materials like wood. Foamcore has relatively low impact resistance and can dent under moderate force, requiring careful handling. Edge crimping may occur under pressures exceeding 10 psi. The weight-to-strength ratio of foamcore features a specific modulus of approximately 500-1000 kN·m/kg, aiding its use in portable displays.

Thermal and Chemical Properties

Foamcore has low thermal conductivity, typically 0.028 to 0.035 W/m·K, offering minor insulating effects for temporary displays. This derives from the closed-cell XPS structure. The coefficient of thermal expansion is approximately 50-70 × 10^{-6} /°C, leading to about 0.5% dimensional change over a 50°C range. For flammability, foamcore usually achieves a Class A or B rating under ASTM E84, with low flame spread and smoke development. It may self-extinguish after ignition removal, but can release styrene vapors and toxic gases, posing risks in enclosed areas. Paper facings may char and affect surface burning. Foamcore shows good resistance to and household cleaners, remaining stable during typical exposure. It degrades in hydrocarbons, with dissolving in solvents like , limiting use near organic chemicals.

Variants

Standard Types

Standard foamcore, often referred to as the basic or classic variant, consists of an extruded core laminated between two sheets of bright white, double clay-coated paper facers, providing a smooth surface suitable for mounting and display purposes. This configuration evolved from Monsanto's original Fome-Cor board introduced in the late . These boards are typically available in thicknesses ranging from 3 mm to 10 mm (1/8 inch to 3/8 inch), with common options including 3 mm, 5 mm, and 10 mm to balance rigidity and lightness. Standard sizes for white foamcore sheets include 20 x 30 inches for smaller projects and up to 4 x 8 feet for larger applications, allowing versatility in and crafting. Thickness tolerances are maintained at ±0.020 inches (±0.5 mm) across standard variants, ensuring consistent performance during fabrication and use. These boards can be easily cut to custom dimensions using standard tools like utility knives or mat cutters, with cut tolerances typically around ±0.118 inches for panel edges. Black or colored variants of standard foamcore feature opaque paper facings, often uncoated black or tinted for direct inkjet or , while retaining the same core density and thickness options as the white version. This allows for immediate graphic application without additional preparation, maintaining the lightweight and rigid properties of the base material.

Specialty and Enhanced Variants

Specialty variants of foamcore are engineered modifications that enhance specific properties such as , resistance, flexibility, or , tailoring the material for niche applications in displays, , and crafts. These variants typically retain a core but incorporate alternative facings or core compositions to address limitations of standard types, which use basic or clay-coated surfaces. Gatorboard represents a durable enhancement to traditional foamcore, featuring a dense foam core bonded between two layers of wood-fiber veneer facings. This construction provides superior resistance to denting, warping, and impact compared to standard foamcore with its lightweight core and clay-coated paper faces, making Gatorboard suitable for high-traffic indoor displays and long-term . The wood-fiber veneer adds rigidity and smoothness, allowing for easier and handling without the creasing common in basic foamcore. Available in thicknesses from 3/16 inch to 1 inch, Gatorboard is particularly valued in environments requiring frequent transport or mounting. Foil-faced or plastic-laminated foamcore variants improve resistance for use in humid or damp environments, where standard paper-faced boards would degrade. These modifications involve applying aluminum foil or plastic laminates, such as PVC or coatings, over the foam core to create a barrier against absorption and warping. For instance, PVC-laminated foam boards maintain structural integrity in high-humidity settings like indoor poolsides or coastal displays, offering enhanced durability without significantly compromising the lightweight nature of foamcore. lamination, in particular, provides a smooth, printable surface while protecting the core from mold and . Recent innovations include recyclable polystyrene-faced boards like UltraBoard HD, introduced in 2023, which incorporate high-density polystyrene facings over a foam core for improved rigidity and environmental compatibility. This variant enhances resistance to moisture, warping, and impacts while ensuring 100% recyclability. UltraBoard HD outperforms standard foamcore in structural stability for demanding signage and mounting tasks, with options in thicknesses from 1/4 inch to 3 inches, promoting sustainability without sacrificing performance.

Applications

Graphic Arts and Displays

Foamcore is widely utilized in the for mounting photographic prints and artwork, providing a yet rigid substrate that ensures flat, warp-free displays. Adhesives such as heat-activated or peel-and-stick options are applied to secure images directly to the board's smooth, clay-coated faces, allowing for presentations without the need for additional framing in many cases. Standard sizes for these mounts commonly reach up to 40x60 inches, making it suitable for gallery exhibitions and portfolio displays where durability and ease of handling are essential. In signage and point-of-purchase applications, foamcore serves as an economical medium for direct on its white, printable surfaces, enabling high-resolution for retail environments. The material's smooth facers accept UV, eco-solvent, and aqueous inks effectively, producing vibrant indoor signs that can be enhanced with for added protection against scratches and fading. Laminated foamcore supports short-term outdoor use when sheltered from direct exposure, though it remains primarily recommended for interior settings due to its non-waterproof nature. For booths, foamcore facilitates modular assembly into lightweight backdrops and panels, leveraging its ease of cutting and low weight—often over 95% air by composition—for portable setups that transport easily. These structures can integrate LED for illuminated graphics, with double-sided and rigid variants enhancing visual impact in temporary exhibits. Its versatility in die-cutting and mounting allows for custom configurations that support branding elements without heavy infrastructure. In framing applications, foamcore acts as a rigid backing in shadow boxes, offering stability to layered artwork and memorabilia while minimizing distortions that could cause uneven reflections from the front. Acid-free variants preserve the of prints over time, fitting standard frame rabbets and providing a cost-effective alternative to heavier boards for depth-oriented displays.

Modeling and Crafts

Foamcore is widely used in architectural modeling due to its rigidity and ease of manipulation, allowing for the creation of detailed scale representations of building facades and structures. Laser-cutting enables precise fabrication of 3D models from foamcore sheets, incorporating mechanisms like finger hinges for quick assembly without adhesives, as demonstrated in techniques that convert digital designs into foldable layouts. Hand-scoring with a along straightedges produces clean folds for corners and edges, facilitating the construction of multi-layered facades. A standard 5 mm thickness provides sufficient structural integrity for models up to A2 size, supporting loads exceeding 60 kg in tested configurations while remaining lightweight and resistant to warping. In hobby crafts, foamcore's lightweight nature—typically under 0.25 kg per 20 x 30 inch panel—makes it ideal for die-cutting into components for costumes and , particularly in where portability is essential. Manufacturers recommend it for crafting rigid yet portable elements like armor pauldrons or blades, which can be layered and painted for without adding significant weight. Flexible variants of foamcore allow for subtle curves in prop designs, enhancing creative versatility in personal projects. For prototyping, foamcore supports rapid mockups through methods like hot wire cutting, which melts through the foam core for smooth contours and quick iterations of ergonomic forms or enclosures. This approach minimizes material waste and enables designers to test scale and fit in hours, often combining foamcore with adhesives for hybrid assemblies. Professional prop fabricators note its suitability for initial concept validation before transitioning to final materials. Educational applications leverage foamcore in settings for constructing dioramas, where its clean-cutting properties aid in building scenes like historical reenactments or ecosystems. Non-toxic PVA glues, such as white glue, provide safe assembly without dissolving the , allowing students to layer elements securely for projects. Suppliers emphasize its role in fostering creativity in K-12 crafts, with panels designed for easy handling by young users.

Advantages and Limitations

Key Benefits

Foamcore's low material cost, often under $15 per 4x8-foot sheet in bulk quantities, makes it an economical choice for of temporary displays and signage, enabling widespread accessibility for businesses and creators without significant investment. Its versatility in fabrication stems from compatibility with standard tools such as utility knives, saws, and printers, allowing for straightforward cutting, mounting, and processes that streamline production compared to denser materials like . The material's portability arises from its light weight, with standard 4x8-foot sheets weighing approximately 5 pounds, facilitating easy shipping, handling, and on-site assembly for events or installations. This low density, derived from the sandwiched between paper liners, contributes to its overall ease of transport. For short-term applications, liner options provide archival quality by maintaining a neutral , helping to prevent print yellowing and degradation.

Drawbacks and Challenges

Foamcore's fragility is a primary limitation, as it dents easily under low-impact forces, which can occur during handling or transport. This vulnerability necessitates protective measures, such as adding reinforced edges or using padded packaging to prevent damage in shipping. The material exhibits high moisture sensitivity due to its paper facings, which absorb ambient and lead to warping in high-humidity environments. To mitigate this, users often seal edges with tape or apply protective coatings, though prolonged exposure still risks deformation. As a non-structural material, foamcore is unsuitable for load-bearing applications and is limited to flat, supported uses; unsupported spans can result in sagging under minimal weight. Workarounds include framing or mounting on rigid substrates to maintain planarity in displays or models. Fire safety poses significant challenges, as standard foamcore is flammable and requires flame-retardant treatments to comply with standards such as ASTM E84 for flame spread in indoor exhibits or public spaces. Without such treatments, it can ignite rapidly, limiting its use in regulated environments. For enhanced durability addressing some of these issues, variants like Gatorboard incorporate wood-fiber veneers.

Environmental Considerations

Production Impacts

The of foamcore, which typically consists of a foam core laminated between paper or plastic facers, entails substantial demands, particularly during the phase of the . This consumes approximately 500-800 kWh per ton of , accounting for heating, melting, and shaping the material into foam sheets. These inputs, often sourced from fuels, result in 2-3 tons of CO2-equivalent emissions per ton of produced, making the core material the primary contributor to the product's . Resource consumption in foamcore production is heavily tied to petroleum-based feedstocks and usage. Styrene , derived from , serves as the foundational material for synthesis, amplifying reliance on non-renewable hydrocarbons and associated extraction impacts. Cooling during and further requires approximately 6 kg of per kg of foam, contributing to overall freshwater demands in industrial operations. Waste streams from foamcore fabrication exacerbate environmental pressures. Cutting and trimming operations generate scrap material, much of which ends up in landfills due to challenges in reprocessing the composite structure. Additionally, the curing of adhesives used to bond the core to facers releases volatile organic compounds (VOCs), such as and , into the atmosphere. Global foamcore production is concentrated in and , where manufacturing is robust.

Sustainability and Recycling

Foamcore's recyclability hinges on its primary components, with the expanded (EPS) core classified as #6 , which is theoretically recyclable through densification and reprocessing into new products. However, practical rates remain low due to EPS's low density, which makes collection and transportation inefficient, and its tendency to fragment into during handling. The or clay-coated facings commonly used on traditional foamcore further complicate the process, as separating these cellulosic materials from the foam requires specialized equipment not available in most municipal facilities, often resulting in the entire board being landfilled. Advancements in material design have addressed these issues, notably with the introduction of UltraBoard HD in 2023, a high-density foam board featuring polystyrene facings bonded without paper, enabling 100% recyclability as uniform #6 plastic that can be ground and repelletized for reuse in extrusion processes. This innovation eliminates separation challenges and supports closed-loop recycling, aligning with broader industry shifts toward mono-material constructions to enhance recovery rates. Emerging bio-based alternatives to petroleum-derived polystyrene cores include plant-sourced foams, developed from renewable feedstocks like lignin or vegetable oils, which reduce reliance on fossil fuels by substituting up to 30% of traditional polyols with bio-derived equivalents in pilot formulations since 2020. These bio-polyurethanes maintain structural integrity for display and modeling applications while lowering the associated with foam production, though scalability remains limited to research and early commercial trials. Industry leaders like 3A Composites aim for carbon-neutral manufacturing by 2035 as part of their goals. At end-of-life, traditional foamcore's mixed materials preclude composting, as the non-biodegradable EPS core resists decomposition and cannot integrate with organic waste streams without prior separation. models in the display sector prioritize and scrap reclamation instead, with manufacturers like UltraBoard achieving near-100% recovery of production off-cuts through grinding and reintegration, thereby minimizing landfill diversion. Regulatory measures, such as the EU's Single-Use Plastics Directive banning certain PS foam items since 2021 and various U.S. local bans as of 2025, further influence foamcore production and disposal practices.

References

  1. https://www.curbellplastics.com/materials/plastics/foam-boards/
  2. https://www.858graphics.com/what-is-foamcore/
  3. https://lairdplastics.com/pages/resources-center/foam-board-uses-and-properties/
  4. https://profileproducts.com.au/blogs/news/what-is-foam-board
  5. https://www.foamcoreprint.com/blog/foamcore-printing-facts-they-dont-want-you-to-know
  6. https://armenianweekly.com/2016/10/31/ardashes-arthur-avedis-aykanian-1923-2016/
  7. https://ivypanda.com/essays/lighting-design-foam-board/
  8. https://patents.google.com/patent/US3062698A/en
  9. https://www.core77.com/posts/27606/The-ID-Students-Friend-Foamcore-Blue-Foam-and-Others
  10. https://www.newyorker.com/magazine/1982/07/12/foam-and-brass
  11. https://www.britannica.com/money/Monsanto
  12. https://www.nytimes.com/1993/12/23/business/company-news-international-paper-acquires-a-monsanto-line.html
  13. https://www.thegrumble.com/threads/want-a-history-lesson-on-v-nails-and-foam-core.69759/
  14. https://3acompositesusa.com/products/fome-cor/
  15. https://www.epa.gov/sites/default/files/2020-10/documents/c06s06-3.pdf
  16. https://www.dupont.com/products/panel-core-20-xps.html
  17. https://www.gteek.com/XPS-Foam-Board
  18. https://www.signs.com/foamboard/
  19. https://www.dupont.com/content/dam/dupont/amer/us/en/performance-building-solutions/public/documents/en/styrofoam-panel-core-20-xps-pis-43-d100943-enus.pdf
  20. https://www.hotmelt.com/blogs/blog/guide-to-bonding-foam-using-hot-melt-adhesive
  21. https://www.researchgate.net/publication/233021115_Manufacture_of_Syntactic_Foams_Using_Starch_as_Binder_Post-Mold_Processing
  22. https://www.china-acpline.com/info/what-is-the-manufacturing-process-of-foam-boar-89957870.html
  23. https://www.curbellplastics.com/wp-content/uploads/2022/11/Fome-Cor-Fabrication-Manual.pdf
  24. https://www.owenscorning.com/en-us/insulation/products/foamular-250
  25. https://bayinsulation.com/wp-content/uploads/2023/09/OC_Foamular_Extruded_Polystyrene_XPS_Rigid_Foam_Insulation_Brochure.pdf
  26. https://www.easycomposites.eu/xps-extruded-polystyrene-foam
  27. https://www.matweb.com/search/DataSheet.aspx?MatGUID=1c41e50c2e324e00b0c4e419ca780304
  28. https://www.dupont.com/building/XPS-vs-EPS.html
  29. https://www.dick-blick.com/msds/DBH_SDS_13228XXXX.pdf
  30. https://www.piedmontplastics.com/products/paper-faced-foam-board
  31. https://makerstock.com/products/foam-core-board
  32. https://lairdplastics.com/all-products/fome-cor-board/
  33. https://www.binding101.com/blog/post/what-is-the-difference-between-foam-board-and-gator-board
  34. https://foamboards.com/blogs/the-board-blog/gatorfoam-foam-board-what-is-it
  35. https://lairdplastics.com/categories/foam-boards.html
  36. https://www.jinbaoplastic.com/How-do-your-PVC-foam-boards-hold-up-in-humid-or-wet-environments-id48884876.html
  37. https://ultraboard.com/new-introducing-ultraboard-hd-our-most-rigid-100-recyclable-polystyrene-faced-foam-board/
  38. https://www.nationsphotolab.com/products/mounting-foamcore
  39. https://www.printing.org/content/2021/01/12/new-fome-cor-collection-offers-widest-portfolio-of-high-quality-innovative-foam-boards
  40. https://www.signs.com/blog/pvc-and-foam-board-signage-101/
  41. https://www.speedpro.com/find-a-solution/materials/foam-core/
  42. https://www.framedestination.com/blog/mount-board/what-type-of-foamcore-backing-board-to-use-2
  43. https://dl.acm.org/doi/10.1145/3526113.3545618
  44. https://foamboards.com/blogs/the-board-blog/guide-to-making-foam-board-architectural-models
  45. https://www.fictiv.com/articles/guide-to-foamcore-joining-techniques
  46. https://www.uline.com/Product/Detail/S-13723/Foam-Core-Boards/Foam-Core-Board-20-x-30-Black-3-16-thick
  47. https://www.punishedprops.com/cosplay-disasters/
  48. https://www.frog3d.com/how-to-cut-foam-with-hot-wire/
  49. https://www.schoolspecialty.com/school-smart-foam-boards-20-x-30-inches-white-pack-of-10-1494871
  50. https://www.vms-supplies.com/pva-product-overview
  51. https://display-wholesale.com/products/foam-core-board-1-sheet-4-x-8
  52. https://www.goodguyssigns.com/blog/foam-board-pros-and-cons/
  53. https://www.uline.com/Product/Detail/S-19382/Foam-Core-Boards/Foam-Core-Board-48-x-96-Black-White-3-16-thick
  54. https://www.dickblick.com/products/acid-free-foam-board/
  55. https://www.jerrysartarama.com/viewpoint-acid-free-foam-backing
  56. https://www.858graphics.com/how-strong-is-foam-core-the-results-surprised-everyone/
  57. https://www.exhibitedge.com/moving-beyond-foamcore/
  58. https://codes.iccsafe.org/content/IBC2021P1/chapter-26-plastic
  59. https://www.sciencedirect.com/science/article/pii/S2352484722000713
  60. https://www.nature.com/articles/s41598-025-01257-y
  61. https://www.climatiq.io/data/emission-factor/8999e49a-9e59-4c21-9489-6fd60eebdad4
  62. https://www.shell.com/business-customers/chemicals/our-products/styrene-monomer/what-is-styrene-monomer.html
  63. https://eumeps.eu/eumeps-newsroom/news/aipe-highlights-the-environmental-credentials-of-expanded-polystyrene
  64. https://pmc.ncbi.nlm.nih.gov/articles/PMC8069056/
  65. https://www.beyondplastics.org/fact-sheets/polystyrene
  66. https://www.goodstartpackaging.com/polystyrene-foam-cups/
  67. https://www.researchgate.net/publication/380386361_Mechanical_recycling_of_foam_from_end-of-life_mattresses_by_AIR-LAY_process_for_the_production_of_new_mattresses_with_a_fully_circular_approach
  68. https://news.wsu.edu/press-release/2025/01/28/plant-based-substitute-for-fossil-fuels-developed-for-plastic-foams/
  69. https://www.nature.com/articles/s44296-025-00064-w
  70. https://www.display.3acomposites.com/en/company/sustainability/
  71. https://blogs.colgate.edu/sustainability/2011/11/10/styrofoam-why-it-is-harmful-alternatives/
  72. https://ultraboard.com/ultraboard-ensures-sustainability-foam-core-substrate-recycling/
  73. https://environment.ec.europa.eu/topics/plastics/single-use-plastics_en
Add your contribution
Related Hubs
User Avatar
No comments yet.