Hubbry Logo
GM Family Z engineGM Family Z engineMain
Open search
GM Family Z engine
Community hub
GM Family Z engine
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
GM Family Z engine
GM Family Z engine
GM Family Z engine
View on Wikipedia
from Wikipedia
Family Z engine
Overview
ManufacturerGeneral Motors
Production2010-2015
Layout
ConfigurationInline-4
Displacement
  • 2.0 L; 121.9 cu in (1,998 cc)
  • 2.2 L; 136.1 cu in (2,231 cc)
Cylinder bore86 mm (3.39 in)
Piston stroke
  • 86 mm (3.39 in)
  • 96 mm (3.78 in)
Cylinder block materialCast iron
Cylinder head materialAluminum
ValvetrainDOHC
Compression ratio16.3:1, 16.5:1
Combustion
TurbochargerVariable-geometry
Fuel systemCommon rail direct injection
Fuel typeDiesel
Oil systemWet sump
Cooling systemWater-cooled
Output
Power output96–135 kW (131–184 PS; 129–181 hp)
Torque output315–400 N⋅m (232–295 lb⋅ft)
Chronology
PredecessorVM Motori RA 420
SuccessorGM Family B engine

The GM Family Z engine is a turbocharged common rail diesel engine produced by General Motors Korea since 2010. It replaced VM Motori RA 420 diesel engine in a number of GM applications, such as the diesel versions of vehicles sold as Chevrolet made for North America, Daewoo made for Korea, Opel made for Europe and Holden made for Australia.

The engine features chain driven DOHC valvetrain with hydraulic tensioners, twin balance shafts in the oil pump and electronically controlled variable-geometry turbocharger; the common rail system operates at pressures of up to 1,800 bar (26,000 psi), maximum in-cylinder pressure is 180 bar (2,600 psi), improving on power and torque. Compression ratio is 16.5:1.

For 2012, compression ration is reduced to 16.3:1, and a new intake port increases air flow and swirl control, improving nitrogen oxide (NOx) emissions and performance.[1]

Chevrolet Captiva/Opel Antara

[edit]
Displacement Power Torque Code/RPO Years
2.0 L (1,998 cc) VCDi 120 kW (163 PS; 161 hp) at 3800 rpm

360 N⋅m (266 lb⋅ft) at 2000 rpm

Z20D1, LNP 2011–2015 (Chevrolet)
2010-2013 (Opel)

2.2 L (2,231 cc) VCDi

120 kW (163 PS; 161 hp) at 3800 rpm

360 N⋅m (266 lb⋅ft) at 2000 rpm

A22DM, LNQ/LNR
135 kW (184 PS; 181 hp) at 3800 rpm 400 N⋅m (295 lb⋅ft) at 2000 rpm A22DMH, LNQ/LNS

Chevrolet Cruze

[edit]
Displacement Power Torque Years
2.0 L (1,998 cc) VCDi 120 kW (163 PS; 161 hp) @ 3800 rpm 360 N⋅m (266 lb⋅ft) @ 1750-2750 rpm 2011–2015

Chevrolet Malibu

[edit]
Displacement Power Torque Years
2.0 L (1,998 cc) VCDi 120 kW (163 PS; 161 hp) @ 4000 rpm 350 N⋅m (258 lb⋅ft) @ 1750 rpm 2012–2015

Chevrolet Orlando

[edit]
Displacement Power Torque Years
2.0 L (1,998 cc) VCDi 120 kW (163 PS; 161 hp) @ 3800 rpm 350 N⋅m (258 lb⋅ft) @ 2000 rpm 2012–2015
96 kW (131 PS; 129 hp) @ 3800 rpm 315 N⋅m (232 lb⋅ft) @ 2000 rpm

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

GM Family Z engine

View on Grokipedia
from Grokipedia
The GM Family Z engine is a family of turbocharged, common-rail direct-injection diesel engines developed and produced by Korea (formerly GM ) from 2010 to around 2018, primarily for use in GM's global passenger vehicles outside . These engines, marketed under the VCDi branding, feature inline-four configurations with displacements of 2.0 liters (1,998 cc) and 2.2 liters (2,231 cc), DOHC valve trains, and bore/stroke dimensions of 86 mm × 86 mm for the 2.0 L variant and 86 mm × 96 mm for the 2.2 L. Designed as a clean-sheet replacement for the earlier RA 420 SOHC diesel, the Family Z emphasized improved , lower emissions, and higher performance through variable geometry turbocharging and high-pressure systems. The engine family debuted in models like the Chevrolet Captiva and Cruze, with power outputs varying by variant and application: the 2.0 L versions deliver between 100 kW (136 PS) and 135 kW (184 PS) at 3,800 rpm, paired with torque from 320 Nm to 400 Nm between 2,000 and 2,750 rpm, while the 2.2 L variants range from 120 kW (163 PS) to 135 kW (184 PS) with 360 Nm to 400 Nm. Applications include the Chevrolet Cruze, Captiva, and Orlando, as well as Opel and Holden equivalents in Europe and Australia, often mated to 6-speed manual or automatic transmissions like the 6T45. Notable for their B20 biodiesel compatibility and compliance with Euro 5 emissions standards, the Family Z engines contributed to GM's diesel offerings in international markets, though they were phased out in favor of PSA-derived units following the 2017 Opel acquisition by PSA Group. Key strengths of the Family Z include robust cast-iron blocks for durability, aluminum heads for weight reduction, and advanced engine management systems from suppliers like Bosch, enabling competitive highway fuel economy of around 5-6 L/100 km. However, some variants faced criticism for higher maintenance costs related to diesel particulate filters and turbo longevity in high-mileage use. Overall, the family represented GM Korea's engineering in diesel technology.

Overview

Development and Production

The GM Family Z engine family represents a series of turbocharged common rail diesel inline-4 engines developed by Korea (GMK) as part of the company's broader investment in local R&D. This development was supported by a $3.2 billion commitment announced in , which included funding for programs at GMK facilities to enhance GM's global diesel offerings. The engines were designed to succeed earlier diesel units like the VM Motori RA 420 SOHC, providing improved performance for compact vehicles. Production of the Family Z engines commenced in at GMK's Bupyeong plant in , , where the facility has historically manufactured propulsion systems including diesel engines since the . The plant, which assembles both gasoline and diesel powertrains alongside vehicle production, integrated the Family Z line to support GM's compact platforms such as the Delta II used in the . Development emphasized advancements in fuel efficiency and emissions control to meet Euro 5 standards, aligning with global regulatory shifts toward cleaner diesel technology. The engines were produced until 2015, when GM transitioned to next-generation designs for stricter emissions requirements like Euro 6. Key milestones included the initial deployment in 2011 for the Chevrolet Cruze and Captiva diesel variants. By 2011-2012, production expanded to supply vehicles in Europe, Asia, and Australia, with the Bupyeong facility operating alongside gasoline engine lines to streamline manufacturing. Over its run, the Family Z family contributed to more than 500,000 units across GM's international lineup before discontinuation.

Role and Replacement

The GM Family Z engine was developed as an entry-level diesel option for General Motors' compact and mid-size vehicles, particularly targeting markets in Europe and Asia where diesel demand was strong due to rising fuel prices in the late 2000s and early 2010s. It replaced the pricier VM Motori RA 420 engine in models like the Chevrolet Captiva, offering a more cost-effective alternative while balancing performance and fuel economy. The engine integrated with 6-speed manual and automatic transmissions to support GM's strategy for efficient diesel propulsion in fuel-sensitive regions. Production of the Family Z ended around 2015, with the GM Family B engine (a 2.0L/2.2L diesel co-developed with ) taking over as its successor, providing superior Euro 6 emissions compliance through advanced aftertreatment and higher injection pressures, alongside a modular architecture better suited for hybridization. This transition was necessitated by increasingly stringent global emissions standards like Euro 6 (implemented in 2014), which the Family Z struggled to meet without major redesigns, as well as a broader industry shift toward downsized turbocharged gasoline engines amid diesel market challenges and production rationalization at facilities. The Family Z's emphasis on direct injection influenced GM's later diesel architectures by standardizing efficient fuel delivery systems.

Design and Features

Core Architecture

The GM Family Z engine employs an inline-four configuration with dual overhead camshafts (DOHC) driven by a timing chain in most variants, though some early models use a timing belt, and equipped with twin balance shafts to minimize vibrations. The cylinder block is constructed from for durability, featuring and a lubrication system. The aluminum houses 16 valves (four per cylinder). Available displacements are 1,998 cc for the 2.0 L variant, achieved with a bore and stroke of 86 mm each, and 2,231 cc for the 2.2 L variant, using the same 86 mm bore but a 96 mm stroke. is 16.5:1 for early variants, reduced to 16.3:1 from onward, supporting efficient combustion in this diesel architecture.

Fuel and Induction Systems

The GM Family Z engine utilizes a common rail direct injection (CRDI) fuel system, which delivers diesel fuel at high pressures to the injectors from a shared accumulator rail, enabling precise control over injection timing and quantity for improved combustion efficiency. This system operates at pressures up to 1,800 bar, supporting multi-stage injection events such as pilot, main, and post-injection to minimize noise, enhance fuel atomization, and facilitate emissions aftertreatment regeneration. Early variants employ solenoid-operated injectors for reliable operation. The system is designed for ultra-low sulfur diesel (ULSD) fuel to prevent damage to sensitive components like the injectors and catalysts. For air induction, the engine features a single (VGT) with adjustable vanes that optimize exhaust flow to reduce lag and broaden the torque curve, paired with an to cool the compressed intake charge and increase . Electronic actuation of the VGT provides precise control over boost, achieving responsive performance while maintaining efficiency under varying loads. This configuration supports the engine's diesel-specific requirements by ensuring adequate for complete without excessive turbo sizing. Emissions control integrates a (DPF) to capture particles, combined with a high-pressure (EGR) system for reduction and gains. The DPF regenerates passively during highway driving or actively via post-injection fuel dosing when accumulation is detected, while the EGR cooler prevents excessive intake temperatures. The CRDI system's integration with (OBD-II) allows real-time monitoring of fuel pressure, injector performance, and emissions components for fault detection. Routine encompasses fuel replacement at approximately 30,000 km to avoid contamination, and inspection or service around 150,000 km to address potential vane sticking or bearing wear.

Specifications

2.0 L Variant

The 2.0 L variant of the GM Family Z engine features a displacement of 1,998 cc with a square bore and stroke configuration measuring 86 mm × 86 mm, providing a balanced design for efficient combustion in compact diesel applications. This engine delivers a power output ranging from 96 kW (131 PS; 129 hp) to 120 kW (163 PS; 161 hp) at 3,800 rpm. Torque production varies from 315 N⋅m (232 lb⋅ft) to 360 N⋅m (266 lb⋅ft) at 2,000 rpm, enabling strong low-end response suitable for urban and highway driving. Engine codes for this variant include Z20D1 and LNP, reflecting adaptations in turbocharging, fuel mapping, and emissions controls across markets. Fuel economy typically ranges from 5.5–6.5 L/100 km combined (equivalent to 43–51 mpg US), paired with CO₂ emissions of 130–150 g/km, depending on transmission and vehicle integration. Optimized for front-wheel-drive platforms, the 2.0 L variant emphasizes lightweight construction while sharing the core architecture of the Family Z series for modular scalability.

2.2 L Variant

The 2.2 L variant of the GM Family Z engine features a displacement of 2,231 cc, achieved through a bore of 86 mm and a stroke of 96 mm in its inline-four configuration. This undersquare design, with the stroke longer than the bore, emphasizes low-end delivery suitable for mid-size vehicles requiring strong pulling capability. Power output for this variant ranges from 120 kW (163 PS; 161 hp) at 3,800 rpm in the base tune to 135 kW (184 PS; 181 hp) at 3,800-4,000 rpm in higher-output versions, depending on the application. Corresponding torque figures span 360 N⋅m (266 lb⋅ft) at 1,500-2,750 rpm for the lower-power setup to 400 N⋅m (295 lb⋅ft) at 2,000 rpm for the peak tune. The engine codes associated with these configurations include A22DM and A22DMH (along with variants like LNQ and Z22D1) for models such as the and Malibu. Fuel economy for the 2.2 L variant typically achieves 6.0-7.0 L/100 km (39-47 mpg ) in combined driving cycles, with real-world figures varying by transmission and —such as 6.6 L/100 km combined for manual front-wheel-drive setups. Associated CO2 emissions range from 159-174 g/km under 5 standards, reflecting its common-rail direct injection and . This variant shares the family’s common-rail fuel system for efficient diesel combustion.

Applications

Chevrolet Captiva and Opel Antara

The and , both compact crossover SUVs produced from 2006 to 2015, incorporated the GM Family Z 2.2 L turbocharged diesel engine primarily in their later models to meet demand for efficient diesel powertrains in global and European markets, respectively. The was assembled in and South Korea for worldwide distribution, while the served as its badge-engineered counterpart in under the brand, sharing the Theta platform and offering optional all-wheel drive (AWD) configurations. Introduced in 2011 as part of a mid-cycle refresh, the 2.2 L Family Z variant (engine code Z22D1) replaced earlier VM Motori-sourced diesels, delivering outputs of 120 kW (163 PS) at 3,800 rpm with 350 N⋅m of at 2,000 rpm in the base tune, or 135 kW (184 PS) at 3,800 rpm with 400 N⋅m at 2,000 rpm in the higher-output version. These engines were paired exclusively with a six-speed in AWD setups, emphasizing smooth delivery suited to the SUVs' 1,700–1,800 kg curb weights and family-oriented utility. The diesel options complied with 5 emissions standards, featuring common-rail direct injection and a (DPF) for reduced urban particulates. Performance in these models prioritized low-end for up to 1,500 kg and light off-road capability, with the 135 kW version achieving 0–100 km/h in approximately 10.1 seconds and a top speed of 192 km/h in automatic AWD guise. The AWD system, integrated with the engine's broad band, provided adequate traction on slippery surfaces like , though the vehicles' 176–190 mm ground clearance and road-biased tires limited extreme off-road use. Fuel economy averaged 7.5–8.5 L/100 km in combined driving, supporting the models' appeal in regions favoring diesel for long-distance efficiency. Production of the Captiva and Antara with the Family Z 2.2 L engine ended in 2015, coinciding with platform discontinuation and a shift toward gasoline-only variants in select markets amid tightening emissions regulations and declining diesel demand in .

Chevrolet Cruze

The first-generation (J300 platform, 2008–2015) primarily utilized the 2.0 L variant of the GM Family Z . Introduced in the Cruze starting in 2011 to replace earlier VM Motori-sourced diesels, the Family Z engine emphasized efficiency and refinement in the compact car's front-wheel-drive architecture. This integration supported the Cruze's positioning as a versatile sedan and for global markets favoring diesel powertrains. The 2.0 L VCDi engine produced 120 kW (163 PS) in European and Asian tunes, paired with 360 N⋅m of and up to 380 N⋅m with temporary overboost functionality. It mated exclusively to a 6-speed manual or , delivering that balanced responsive acceleration with composed highway cruising. metrics underscored the engine's practical strengths, with 0–100 km/h times of 8.5–9.2 seconds for higher-output versions and top speeds reaching 210–220 km/h, depending on gearing and market specifications. Later models incorporated start-stop technology to meet stricter emissions standards in and , further optimizing fuel consumption during stop-and-go driving, with combined figures around 5.0–5.5 L/100 km. The diesel-focused Cruze debuted with this powertrain in and around 2010–2011, gaining popularity in Euro-Asian regions for its blend of torque-rich low-end pull and reduced operating costs.

Chevrolet Malibu

The seventh-generation Chevrolet Malibu (2012-2015) integrated the GM Family Z engine as a diesel option in select international markets, particularly in and , where emissions regulations favored efficient diesel powertrains for mid-size sedans. The 2.0 L VCDi variant, featuring common-rail direct injection and a , was paired with a six-speed automatic transmission and , with optional for enhanced handling. This setup delivered 120 kW (163 PS) at 4000 rpm and 350 N⋅m of from 1750 rpm, providing ample low-end pull for highway merging and urban driving while achieving combined of approximately 5.5 L/100 km. Performance characteristics emphasized refined cruising and responsive , with a 0-100 km/h time of 9.9 seconds and a top speed of 212 km/h, making it suitable for long-distance travel in premium sedan applications. The engine's tuning prioritized mid-range for overtaking, complemented by (NVH) mitigation measures such as enhanced engine bay insulation and a to deliver a luxury-like cabin experience despite the diesel's inherent characteristics. configuration included traction control integration to manage the engine's delivery on slippery surfaces. Introduced in late 2012 at events like the , the diesel Malibu targeted eco-conscious buyers in diesel-dominant regions, where it met stringent Euro 5 emissions standards through and . Availability was limited to left-hand-drive markets initially, with right-hand-drive versions for following in 2013 via Holden dealerships; production ceased by 2015 as the eighth-generation model shifted focus to turbocharged engines globally. Adaptations for these markets included region-specific calibrations for quality and altitude variations, ensuring reliable operation in diverse conditions like Australia's varied terrain.

Chevrolet Orlando

The first-generation Chevrolet Orlando, a seven-seat front-wheel-drive MPV produced from 2010 to 2015, integrated the GM Family Z diesel engines starting in 2011 to provide efficient power for family transport in Europe and Asia. These markets emphasized diesel variants for their fuel economy and torque, with gasoline options limited or unavailable in many regions. The Orlando's design prioritized versatility, seating up to seven passengers while maintaining a compact footprint for urban use. The Orlando employed the 2.0 L Family Z VCDi (code Z20D1) in two main outputs: a standard tune delivering 120 kW (163 PS) at 3,800 rpm and 360 N⋅m at 2,000 rpm, and a detuned version with 96 kW (130 PS) at 3,800 rpm and 315 N⋅m at 2,000 rpm. Paired with a six-speed manual or automatic transmission (GM 6T45), these engines suited the vehicle's front-wheel-drive layout and reinforced drivetrain, optimized for carrying loads up to 632 kg payload. In select Asian markets from 2011, a 2.2 L Family Z variant (code A22DM) was offered, producing 135 kW (184 PS) at 3,800 rpm and 400 N⋅m at 2,000 rpm, enhancing capability for heavier family duties. Performance figures reflected the engines' balance of economy and practicality, with the 163 PS 2.0 L achieving 0-100 km/h in 10.0 seconds (manual) or 11.0 seconds (automatic) and a top speed of 195 km/h. The detuned 130 PS version recorded 10.3 seconds to 100 km/h and 180 km/h top speed, prioritizing lower emissions at 159 g/km CO2. Combined fuel consumption ranged from 6.0 to 7.0 L/100 km, supporting the MPV's role in stop-go traffic common to European and Asian cities. The higher-torque setups enabled capacities up to 1,500 kg when braked, making the Orlando suitable for light trailers or family outings. Production of the diesel-equipped Orlando ceased in 2015, aligning with Chevrolet's strategic withdrawal from the European passenger car market in 2013-2014, though it continued briefly in . The Family Z engines contributed to the model's appeal as an economical seven-seater, with adaptations like variable geometry turbocharging aiding low-end response for urban versatility.

Other Models

The GM Family Z engine was employed in several badge-engineered GM vehicles and regional market variants, particularly in and select European markets, where it powered compact sedans, SUVs, and crossovers adapted for local preferences. In , the Premiere sedan (produced from 2012 to 2015) featured the 2.0 L Z20DTH variant of the Family Z engine, marketed as VCDi and tuned for 110 kW (150 PS) at 4,000 rpm with 321 N⋅m of at 2,000 rpm. This configuration provided efficient performance for urban driving, paired with a five-speed in base models. Holden, GM's Australian subsidiary, integrated the engine into models tailored for right-hand-drive markets with higher torque demands. The Holden Cruze CDX sedan and wagon (2011-2013) used the 2.0 L diesel, delivering 110 kW at 4,000 rpm and 320 N⋅m at 2,000 rpm, emphasizing fuel economy of around 5.3 L/100 km combined. The 7, a seven-seat variant of the Captiva platform, adopted the 2.2 L Z22D1 version from 2011 onward, producing 135 kW at 4,000 rpm and 400 N⋅m at 2,000 rpm for enhanced towing capacity up to 1,600 kg. These Australian adaptations included detuned variants for emissions compliance but prioritized low-end torque for highway overtaking. In , the (2012-2014), a badge-engineered version of the Cruze sedan, offered the 2.0 L diesel in select trims for fleet and export markets, maintaining similar output to the Cruze's 120 kW rating with common-rail injection for urban efficiency. Limited adoption reflected the market's preference for powertrains, with diesel units comprising less than 10% of sales. and equivalents, such as the post-2011 Cruze, saw restricted Family Z use outside the Antara , primarily in eco-focused variants for European fleets where the engine's 2.0 L CDTI branding emphasized Euro 5 compliance. Regional adaptations included higher-output calibrations for Australian conditions, such as the Captiva 7's 2.2 L tune exceeding standard 120 kW figures for better altitude performance. All applications were phased out between 2015 and 2016 as GM transitioned to newer platforms like the E2XX architecture, with no notable aftermarket racing adaptations due to the engine's focus on emissions-controlled efficiency over high-rev performance.

References

  1. https://www.automobile-catalog.com/make/chevrolet/cruze/cruze_ii_sedan/cruze_2_0_vcdi_2012.html
  2. https://www.ultimatespecs.com/car-specs/Chevrolet/25065/Chevrolet-Captiva-LT-22-VCDI-184HP-AWD.html
  3. https://www.autonews.com/article/20070423/ANA/70420076/gm-to-pour-3-2b-into-korea-unit/
  4. https://gmauthority.com/blog/2013/03/did-you-know-2014-chevy-cruze-diesel-has-some-fiat-in-it/
  5. https://gmauthority.com/blog/gm/gm-facilities/gm-korea-facilities/gm-bupyeong-plant/
  6. https://www.roadandtrack.com/car-shows/chicago-auto-show/news/a3841/news-fiat-factoid-about-2014-chevy-cruze-diesel/
  7. https://www.motortrend.com/reviews/1310-first-drive-2014-chevy-cruze-clean-turbodiesel/
  8. https://www.chevroletownersclub.co.uk/threads/captiva-engine-vm-or-z.2142/
  9. https://club.autodoc.co.uk/magazin/vcdi-engines-what-it-stands-for-and-its-performance-parameters
  10. https://www.carfolio.com/chevrolet-cruze-2.0-diesel-automatic-277915
  11. https://www.carfolio.com/vauxhall-antara-2.2-cdti-595639
  12. https://www.ultimatespecs.com/car-specs/Chevrolet/4743/Chevrolet-Captiva-20-VCDI-150.html
  13. https://performance-tuningfiles.com/tuning-specs/opel-antara-22-cdti-184hp
  14. https://dieselnet.com/tech/diesel_fi_common-rail.php
  15. https://www.cruzetalk.com/threads/new-2013-eco-d-cruze-to-use-holset%25E2%2584%25A2-vgt.8508/
  16. https://dieselnet.com/tech/engine_heavy-duty_aftertreatment.php
  17. https://www.encycarpedia.com/us/chevrolet/11-cruze-2-0-d-fastback
  18. https://www.auto-data.net/en/chevrolet-cruze-hatchback-2.0-td-163hp-automatic-17807
  19. https://fair-motors.com/shop/engine-lnp-chevrolet-captiva-cruze-orlando-2-0-d-cdi-td-163hp-131hp/
  20. https://www.cardekho.com/chevrolet/chevrolet-cruze-specifications.htm
  21. https://mymotorlist.com/engines/opel/a22dmh/
  22. https://www.idm-motors.com/chevrolet-captiva-2-2td-135kw-engine-z22d1/
  23. https://mymotorlist.com/engines/opel/a22dm/
  24. https://www.auto-data.net/en/chevrolet-captiva-i-facelift-2015-2.2-vcdi-16v-184hp-awd-automatic-35517
  25. https://www.encycarpedia.com/us/chevrolet/11-captiva-2-2-diesel-4wd-suv
  26. https://www.cars.co.za/motoring-news/chevrolet-captiva-diesel-2-2d-awd-ltz-review/74496/
  27. https://www.ebay.com/itm/388951628438
  28. https://autocatalogarchive.com/wp-content/uploads/2021/11/Chevrolet-Captiva-2011-UK.pdf
  29. https://autocatalogarchive.com/wp-content/uploads/2019/04/Opel-Antara-2014-EU.pdf
  30. https://www.carsales.com.au/editorial/details/facelifted-spark-diesel-malibu-revealed-32172/
  31. https://www.automobile-catalog.com/car/2012/1777640/chevrolet_malibu_2_0_d_ltz_automatic.html
  32. https://zeperfs.com/en/fiche4467-chevrolet-malibu-2-0-vcdi.htm
  33. https://gmauthority.com/blog/gm/chevrolet/orlando/
  34. https://www.autocatalogarchive.com/wp-content/uploads/2018/06/Chevrolet-Orlando-2012.pdf
  35. https://www.automobile-catalog.com/make/chevrolet_europe/orlando_1gen/orlando_1_1/2011.html
  36. https://chevrolet.dixi-car.pl/doc/Orlando-dane-techniczne.pdf
  37. https://www.ultimatespecs.com/car-specs/Chevrolet/23907/Chevrolet-Orlando-LTZ-20-Diesel-163HP-.html
  38. https://en.chevroletclub.net/engines_family.php?id=17
  39. https://www.vindecoderz.com/EN/Chevrolet/Orlando/2011/2.0d%2520MT/specs-features/1868
  40. https://www.encycarpedia.com/us/chevrolet/11-orlando-2-0-163-mpv
  41. https://www.ultimatespecs.com/car-specs/Chevrolet/23922/Chevrolet-Orlando-LT%2B-20-Diesel-131HP-.html
  42. https://www.automobile-catalog.com/car/2009/1223165/daewoo_lacetti_premiere_cdx_2_0_vcdi.html
  43. https://www.carsales.com.au/editorial/details/holden-cruze-diesel-23028/
  44. https://www.automobile-catalog.com/car/2012/1778885/holden_captiva_7_lx_awd_2_2l_diesel.html
  45. https://autocatalogarchive.com/wp-content/uploads/2016/09/Holden-Captiva-7-2014-AU.pdf
  46. https://www.drive.com.au/showrooms/holden/captiva/a278bc8bbc4e85af/
Add your contribution
Related Hubs
User Avatar
No comments yet.