Hubbry Logo
SaltopusSaltopusMain
Open search
Saltopus
Community hub
Saltopus
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Saltopus
Saltopus
Saltopus
View on Wikipedia
from Wikipedia

Saltopus
Temporal range: Late Triassic, 235–205 Ma
Holotype elements
Scientific classification Edit this classification
Kingdom: Animalia
Phylum: Chordata
Class: Reptilia
Clade: Dinosauromorpha
Clade: Dinosauriformes
Clade: Dracohors
Genus: †Saltopus
von Huene, 1910
Species:
†S. elginensis
Binomial name
†Saltopus elginensis
von Huene, 1910

Saltopus ("hopping foot") is a genus of very small bipedal dinosauriform containing the single species Saltopus elginensis from the late Triassic period of Scotland.[1] It is one of the most famous Elgin Reptiles.

Description

[edit]
Life restoration

Saltopus elginensis is known only from a single partial skeleton lacking the skull, but including parts of the vertebral column, the forelimbs, the pelvis and the hindlimbs. These have been mainly preserved as impressions or natural casts in the sandstone; very little bone material is present.[1] It was about the size of a domestic cat, and would have been roughly 80–100 centimetres (31–39 in) long.[2] It had hollow bones like those of birds and other dinosaurs. It may have weighed around 1 kilogram (2.2 lb). In 2016, it was estimated to be 50 cm long, 15 cm high at the hips, and 110 g.[3] Most of the length was accounted for by the tail. It had five-fingered hands, with the fourth and fifth finger reduced in size. Contrary to the original description, in 2011 it was established that the sacrum (hip vertebrae) was made up of two vertebrae, the primitive ancestral condition, not four.[2]

History

[edit]

The only known fossil of Saltopus was discovered in 1867 by William Taylor in the Lossiemouth West & East Quarries. It was initially named as a specimen of Telerpeton elginense (now Leptopleuron lacertinum) by Thomas Henry Huxley in 1867,[4] and it was later named and described by Friedrich von Huene in 1910 as the type species Saltopus elginensis.[1]

The generic name is derived from Latin saltare, "to jump" and Greek πούς, pous, "foot". The specific name refers to its provenance near Elgin, which yields the Elgin Reptiles. The holotype NHMUK R.3915, was excavated from the Lossiemouth Sandstone Formation dating from the Carnian-Norian stage.[1]

Classification

[edit]

Saltopus has been variously identified as a saurischian (lizard-hipped) dinosaur, a more advanced theropod, and a close relative of the herrerasaurs, but its taxonomy has been in dispute because only fragmentary remains have been recovered.[5] Some researchers, such as Gregory S. Paul,[6] have suggested it may represent a juvenile specimen of a coelophysid theropod such as Coelophysis or Procompsognathus. Rauhut and Hungerbühler in 2000 concluded it is a primitive dinosauriform, not a true dinosaur, closely related to Lagosuchus.[7] Michael Benton, continuing the studies of the late Alick Walker redescribing the fossil in 2011, found it to be a dinosauriform more derived than Lagosuchus.[2]

A large phylogenetic analysis of early dinosaurs and dinosauromorphs by Matthew Baron, David B. Norman and Paul Barrett (2017) recovered Saltopus near the base of the dinosaur lineage, suggesting that it may represent the closest relative of true dinosaurs.[8]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Saltopus

View on Grokipedia
from Grokipedia
Saltopus is a of small, bipedal dinosauriform from the epoch, known solely from a single partial skeleton of its , Saltopus elginensis, discovered in . This lightly built reptile, estimated at 800–1000 mm in total length with a comprising over half its body, lived approximately 230 million years ago during the to stages in a subtropical environment of sandy deposits. Characterized by elongated and tightly bunched metatarsals, a longer than the , and reduced outer toes, it likely employed swift, hopping locomotion to pursue small prey such as , though no or dental remains are preserved to confirm its diet. The holotype specimen (NHMUK R3915), consisting of parts of the vertebral column, pelvis, hindlimbs, and forelimbs but lacking the skull, was unearthed in 1909 by amateur collector William Taylor from the Lossiemouth Sandstone Formation in the Lossiemouth West Quarry near Elgin, Morayshire, northeastern Scotland. Taylor presented the fossil to German paleontologist Friedrich von Huene, who formally described and named the genus and species in 1910, deriving the name Saltopus from Latin words meaning "hopping foot" in reference to its presumed agile gait. Initially classified as a primitive theropod dinosaur, the specimen's poor preservation and compression into sandstone slabs has long complicated interpretations, prompting re-examinations using X-rays and CT scans in subsequent studies. Anatomically, S. elginensis exhibits dinosauromorph traits such as a saddle-shaped dorsal margin on the iliac blade and reduced fingers IV and , but retains primitive features like only two sacral vertebrae, excluding it from Dinosauria proper. Its hindlimbs show advanced features for bipedality, including a rudimentary or absent calcaneal and an elongated, slender for balance, suggesting it was an early member of the avemetatarsalian lineage that gave rise to dinosaurs. The forelimbs are small with a grasping hand, possibly adapted for climbing or capturing prey, while the overall build indicates a cat-sized, omnivorous or insectivorous lifestyle in a diverse alongside other early archosaurs. Phylogenetically, Saltopus is positioned as a basal dinosauriform, often recovered as the sister to more derived clades including silesaurids and dinosaurs in cladistic analyses, highlighting the rapid diversification of bipedal ornithodirans during the . This placement underscores its importance in understanding the evolutionary radiation of the dinosaur-bird branch across , with close relatives like Lewisuchus and Pseudolagosuchus known from , indicating a before the dominance of true dinosaurs. Despite debates over its exact affinities—sometimes proposed as an early ornithischian or even a relative—Saltopus remains a key in reconstructing the origins of archosaurian and the pre-dinosaurian faunas of .

Discovery and Etymology

Fossil Discovery

The specimen of Saltopus elginensis was collected by William Taylor, a retired and avid collector from Lhanbryde, in the Lossiemouth West Quarry near , (National Grid Reference NJ 231704). Taylor presented the to the German paleontologist Friedrich von Huene in October 1909, indicating discovery shortly prior to that date. The specimen derives from the Lossiemouth Sandstone Formation, part of the Elgin Sandstone Group, which represents aeolian and fluvial deposits from a desert-margin environment during the late to early stages of the , approximately 230 million years ago. Catalogued as NHMUK PV R 3915 and housed at the Natural History Museum in , the comprises a single partial postcranial skeleton preserved across part and counterpart slabs. It includes 13 cervical and dorsal vertebrae, three sacral vertebrae, six proximal caudal vertebrae, associated ribs, a left , proximal portions of the left , the pelvic girdle (left ilium, both , and pubes), both femora, tibiae, and fibulae, the left astragalus and calcaneum, and pedal elements including digits; the , distal forelimbs, right forelimb, and most of the tail are absent. The remains were found disarticulated and weathered, embedded in hard yellow , with the bone tissue largely dissolved and replaced by voids filled with impressions and molds stained orange by (). Preparation involved manual splitting of the slabs and casting to reveal details, as the original material is fragile and poorly preserved.

Naming and Initial Description

The genus and species Saltopus elginensis was formally named in 1910 by German paleontologist Friedrich von Huene based on a partial skeleton discovered near Elgin, Scotland. The generic name derives from Latin saltus ("jump" or "leap") combined with Greek pous ("foot"), alluding to the presumed agility of its hindlimbs as inferred from the fossil material; the specific epithet elginensis refers to the Elgin locality in Morayshire. Von Huene's initial description portrayed Saltopus as a coelurosaurian , a small bipedal adapted for swift movement, though the bones are poorly preserved and largely replaced by iron-rich . The type specimen (NHMUK R3915) resides in the Natural History Museum, , where its fragility has restricted direct handling in the early , prompting reliance on molds and later imaging techniques for study.

Description

Preserved Material

The holotype specimen of Saltopus elginensis, catalogued as NHMUK PV R.3915, represents the only known fossil material for the taxon and consists of a partial, disarticulated postcranial skeleton preserved primarily as natural moulds in yellow sandstone. The preserved elements include portions of the axial skeleton and appendicular skeleton, specifically: approximately 10 dorsal vertebrae (numbered 5–14 in the sequence), 2 partial sacral vertebrae, and the proximal portions of 24 caudal vertebrae forming a 190 mm section of the vertebral column; several ribs associated with the dorsal vertebrae; the left and right iliac blades (measuring 26 mm and 23 mm, respectively); a left pubis (33 mm long); a left ischium (35–40 mm long); elements of the left forelimb comprising a scapula (22 mm), humerus (36 mm), and radius/ulna (25 mm); both hindlimbs with a left femur (47 mm long), left tibia (66 mm), fibula fragments, and the proximal portions of the right metatarsals II–V, along with associated pedal elements such as the astragalus and calcaneum. No cranial material is preserved, and the specimen lacks the majority of the tail beyond the proximal caudals, as well as the manus and complete right hindlimb. The is incomplete, preserving an estimated 20–30% of the , with the elements scattered and showing signs of , fracturing, and surface typical of encasement. All bones are disarticulated, with no evidence of preservation, impressions, or gastric contents, and the moulds provide limited three-dimensional detail due to matrix infilling. The specimen was originally collected from the Lossiemouth Formation near Elgin, . Preparation of the involved initial manual cleaning and documentation by Friedrich von Huene following its description in , with subsequent efforts in the producing silicone rubber casts to facilitate study without direct handling of the fragile moulds. Modern non-destructive techniques, including radiography and computed tomography (CT) scanning, were applied during a 2011 redescription to reveal internal structures and refine element identifications, though no further imaging updates have been reported as of 2025. Casts of the specimen are housed in several institutions, including the Natural History Museum, , and the , for . Based on scaling from the proportions, particularly the length, the total body length of S. elginensis is estimated at 800–1000 mm, with the hindlimbs and proximal comprising a significant portion of this measurement.

Anatomical Features

Saltopus elginensis is known from a single partial postcranial skeleton, preserving elements of the axial and that reveal a , bipedal build adapted for . The vertebral column includes 10 preserved dorsal vertebrae measuring 8–10 mm in length, with that are slightly waisted and amphicoelous, and neural arches featuring low neural spines that contribute to a slender . Two sacral vertebrae, each approximately 10 mm long, articulate with waisted sacral , indicating a primitive sacral count and a narrow pelvic region. The 24 preserved caudal vertebrae are narrow and elongate, ranging 9–11 mm in length, with chevron facets suggesting a long, flexible tail that comprised more than half of the total body length of 800–1000 mm. The features elongated iliac blades, 23–26 mm long, with a distinctive saddle-shaped dorsal margin and a short preacetabular , supporting bipedal locomotion through a broadened attachment for muscles. The pubis is rod-like and straight, measuring 33 mm in length and 3 mm in width at its narrowest, while the is slender at 35–40 mm long and 2 mm wide, with a slight terminal expansion, forming a pelvic overall. Hindlimb elements are gracile and elongated relative to the body, emphasizing capabilities. The exhibits a sigmoid , measuring 47–55 mm long, with a prominent anterior and a trochanteric shelf proximally for muscle attachment. The is longer than the at 66 mm, with a tibia-to- length ratio of approximately 1.2:1, and features a robust cnemial crest. The pes is bird-like, with metatarsals II–IV tightly packed and elongated (35–38 mm), where metatarsal III is the longest and metatarsals II and IV are subequal; the phalangeal formula is reconstructed as ?-3-4-5-0, including recurved pedal unguals and a reduced hallux. The overall skeletal structure indicates a small, lightweight animal, with hollow or thin-walled bones enhancing agility in a terrestrial environment.

Classification

Historical Classifications

When Saltopus elginensis was first described, Friedrich von Huene classified it as a primitive coelurosaurian theropod dinosaur in 1910, interpreting its slender limbs and bipedal posture as indicative of a small, agile carnivore similar to other early saurischians. This placement was influenced by the fragmentary nature of the holotype specimen, which lacked a skull and complete vertebrae, leading to reliance on comparisons with better-known theropods like Coelophysis bauri. Throughout the 1910s to 1950s, von Huene's view dominated, with the taxon regarded as one of the earliest and smallest known dinosaurs from the Late Triassic of Europe. In the and continuing into the , the classification shifted toward viewing Saltopus as a basal saurischian, as articulated by Alfred S. Romer in his 1966 synthesis of vertebrate paleontology, where he placed it within Procompsognathidae based on shared features such as elongate hindlimbs and reduced forelimbs. Subsequent works by Rodney Steel (1970) and Alick Walker (1970) supported this dinosaurian affinity, emphasizing traits like the perforated acetabulum and antorbital fenestra inferred from the partial skeleton, while Benton and Walker (1985) underscored its position near the base of despite preservation issues. The limited fossil evidence continued to drive interpretations, with analogies to for theropod-like agility. By the 1990s, growing skepticism emerged regarding Saltopus' dinosaurian status, as Michael J. Benton (1990) described it as an equivocal early saurischian in discussions of origins, noting insufficient synapomorphies to confirm inclusion within Dinosauria. David B. Norman (1990) further debated this in the same volume, expressing caution regarding its dinosaurian status and considering it a possibly representing a non-dinosaurian ornithodiran, due to the incompleteness of the —preserving only partial postcrania—that complicated definitive placement. These revisions highlighted how the 's incompleteness complicated definitive placement, prompting broader comparisons within Archosauria.

Modern Phylogenetic Analyses

In the early 2000s, cladistic analyses began consistently positioning Saltopus elginensis as a basal dinosauriform within , often highlighting its affinities with early silesaurids based on shared derived traits such as elongated hindlimbs and reduced forelimbs. This placement was reinforced in broader phylogenies, where Saltopus appeared as a non-dinosaurian dinosauriform transitional between basal forms like Pseudolagosuchus and more derived clades including . By the 2010s, phylogenetic positions for Saltopus showed greater variability across datasets, reflecting ongoing debates over character scoring and taxon sampling in early ornithodirans. Nesbitt (2011) incorporated Saltopus into a comprehensive cladistic matrix with over 400 morphological characters and approximately 80 taxa, recovering it as a basal dinosauriform with weak support (bootstrap values around 30-50%), positioned near the base of Dinosauriformes based on key autapomorphies like the trochanteric shelf on the femur and waisted sacral ribs; however, its exact placement relative to silesaurids remained unstable due to fragmentary preservation. A notable reinterpretation came from Baron et al. (2017), whose analysis of more than 150 taxa and 457 characters placed Saltopus within Ornithodira as the sister taxon to Silesauridae + Dinosauria, implying proximity to pterosauromorphs through shared ornithodiran synapomorphies such as an offset jaw joint, though this result was contested for overemphasizing cranial characters and underweighting postcranial evidence like the pes. Recent analyses have refined these views using expanded matrices and advanced resampling techniques, consistently supporting a basal position within Dinosauriformes. For example, Nesbitt et al. (2020) modified the Baron et al. (2017) dataset with additional postcranial characters and over 100 taxa, recovering Saltopus in a with silesaurids and basal Dinosauria, emphasizing the role of metrics like metatarsal elongation in stabilizing the tree. A 2025 phylogenetic analysis recovered Saltopus elginensis as the earliest diverging saurischian with weak support, highlighting ongoing debates in the evolutionary radiation of early ornithodirans during the .

Paleobiology

Locomotion and Behavior

Saltopus elginensis exhibited bipedal locomotion, characterized by elongated hindlimbs that were significantly longer than the forelimbs, with the tibia exceeding the femur in length (approximately 66 mm versus 55 mm). This proportion, combined with a digitigrade posture evident from the subequal metatarsals II and IV (shorter than metatarsal III), suggests cursorial adaptations for agile terrestrial movement rather than quadrupedality. The reduced forelimbs, inferred from the narrow pelvis and limited preserved elements, further supported a primarily bipedal gait, with the long tail likely aiding in balance during rapid maneuvers. The anatomical features of the hindlimbs, including tightly bunched and elongated metatarsals comprising over 50% of tibial length, indicate a , swift runner capable of quick and evasion. Although the name derives from Latin saltare (to jump) and Greek (foot), meaning "hopping foot," reflecting the initial description's interpretation of the flexible ankle (involving the astragalus and calcaneum) as suited for , subsequent analyses reject hopping as the primary mode of locomotion in favor of sustained running. The rudimentary calcaneal tuber and overall slender build reinforce this lifestyle, enabling high in a environment. Its inferred agility would have facilitated evasion from larger predators through rapid sprints and sharp turns, leveraging the flexible spinal column and lightweight skeleton for nimble terrestrial navigation.

Diet and Ecology

The slender build and modest size of Saltopus elginensis, reaching about 80–100 cm in length, suggest a carnivorous or insectivorous diet targeting small prey such as and other diminutive vertebrates, potentially including scavenging opportunities in its environment. The species inhabited the semi-arid continental settings of the , featuring aeolian dune deposits and adjacent systems with seasonal fluvial influences during the ( to stages). This paleoenvironment, located in northern , supported a mosaic of arid landscapes interspersed with river channels. Ecologically, Saltopus served as a basal predator within a diverse dinosauromorph-dominated assemblage, preying on small terrestrial invertebrates and vertebrates while coexisting with larger herbivores like the rhynchosaur Hyperodapedon and armored pseudosuchians such as Stagonolepis and Erpetosuchus. As part of the early diversification of dinosauriforms across northern Pangaea, it exemplifies the radiation of small, terrestrial carnivores in Late Triassic ecosystems, lacking any specialized adaptations for aerial or aquatic modes of life.
Add your contribution
Related Hubs
Contribute something
User Avatar
No comments yet.