Hubbry Logo
Springfield Armory M6 ScoutSpringfield Armory M6 ScoutMain
Open search
Springfield Armory M6 Scout
Community hub
Springfield Armory M6 Scout
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Springfield Armory M6 Scout
Springfield Armory M6 Scout
Springfield Armory M6 Scout
View on Wikipedia
from Wikipedia

The Springfield Armory M6 Scout is a .22 Hornet over .410 bore combination gun that is virtually identical to the original M6 Aircrew Survival Weapon. It is also made in .22 Long Rifle over .410 bore and .22 Magnum over .410 bore.[1][2] The Scouts are made with 18.25 inches (46.4 cm) barrels, as opposed to the original M6's 14 inches (36 cm) barrel length, to comply with National Firearms Act. The later models have large over-sized trigger guards[3] and Picatinny rails for mounting a wide range of sights and scopes. They come in stainless steel or with a Parkerized finish.

Key Information

Characteristics

[edit]

The Springfield Armory M6 Scout is virtually identical to the original Ithaca M6 Aircrew Survival Weapon. The Scout is also made of stamped sheet steel, with a forged steel removable barrel assembly. The barrel assembly is connected to the stock/action group by means of a removable hinge pin. Whether folded or disassembled, the overall length for storage is approximately 18.5 inches which is the length of the barrels. Unlike nearly all other firearms, there is no "furniture" on the Scout like a buttstock or a forearm. The only parts which are not steel are the rubber butt plate and cheek rest. Aircrew were instructed to wrap the barrels with parachute cord as a field expedient fore-stock.[4][5]

The Scout has a rifle barrel mounted above a .410 shotgun barrel, this is known as a superposed "over-under" design. Its upper rifle barrel is chambered for .22 Long Rifle or .22 Magnum, in addition to the .22 Hornet used by the USAF M6.[6] The Scout comes with iron sights and the later models have Picatinny rails for mounting a wide range of sights and scopes.[6]

The original USAF Ithaca M6 stock held 9 rounds of .22 Hornet ammunition and four .410 shells, and the Scout holds 12 rounds of .22 Hornet and 4 shotgun shells. For the rim-fire models, the stock holds 15 rimfire cartridges and four shotgun shells.[citation needed]

One other unique feature of the M6 is the "squeeze-bar trigger". Intended for use by aircrew who might be downed in any type of weather and terrain, the trigger, hammer, and barrel latch are designed to be easily operated while wearing heavy gloves or mittens. To this end, the USAF Ithaca M6 was the only firearm issued to American armed forces that had no trigger guard. The amount of pressure needed to release the sear, combined with the practice of keeping the hammer uncocked unless preparing to fire, was considered sufficient to counter any risk of accidental discharge. Springfield Armory's version included a large over-sized trigger guard.[6]

See also

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Springfield Armory M6 Scout

View on Grokipedia
from Grokipedia
The is a compact, break-action survival firearm that combines an configuration of a barrel and a barrel, originally developed as a civilian adaptation of the U.S. military's M6 Aircrew Survival Weapon for downed pilots and aircrews. Introduced by in the late 1970s and manufactured by Česká Zbrojovka (CZ), the M6 Scout evolved from the 1950s-era military design produced initially by , featuring a foldable metal stock that reduces its overall length to approximately 18.25 inches for portability, with unfolded dimensions of about 32 inches and a weight around 5 pounds. Standard civilian models include an 18.5-inch barrel set chambered in .22 Long Rifle (or ) over , though variants offered over .410 or even .45 Long Colt in the barrel; the design lacks a traditional , instead using a bar-style trigger and a rotating hammer selector for choosing the upper barrel, lower barrel, or safe position. The firearm's stamped steel receiver and forged steel barrels emphasize durability and simplicity for harsh environments, with the buttstock serving as storage for up to nine rifle rounds and four shotgun shells, and dual aperture sights optimized for each barrel's purpose—small game hunting with the rifle and birdshot defense with the shotgun. Production of the original Springfield Armory version continued intermittently until its discontinuation in March 2008, after which it became a sought-after collector's item valued between $500 and $800 as of 2025 depending on condition, while modern clones from manufacturers like and TPS Arms replicate the design with updates such as construction for corrosion resistance and optional caliber expansions like .

History

Military origins

The M6 Aircrew Survival Weapon was developed in the early 1950s by the under contract with the to provide a compact firearm for downed aircrews. The design addressed the need for a lightweight, easily stowable weapon that pilots and crew members could use in remote or hostile environments after an ejection or crash landing. Its primary purpose was not combat but food procurement, enabling users to hunt small game with the barrel or take birds and small fowl using birdshot loads in the barrel. Key features of the military M6 emphasized portability and durability, including 14-inch barrels chambered in for the upper rifle and for the lower shotgun, constructed primarily from stamped steel for weather resistance. The over-under, break-action design incorporated a folding mechanism that reduced the overall length to approximately 9.75 inches when collapsed, allowing it to fit into survival kits without compromising space for other essentials. This configuration balanced the demands of minimal weight—around 4.25 pounds unloaded—with sufficient firepower for subsistence hunting in austere conditions. Production of the M6 began in 1952 under exclusive contract with Ithaca for the , with initial runs focused on equipping aircrews across various platforms. The weapon was widely adopted by the U.S. military throughout the 1950s and into the era, where it saw use by pilots in survival scenarios over jungles and remote areas. By the early 1970s, however, the M6 was phased out of service due to shifts in military priorities, including the adoption of more versatile or integrated systems that better aligned with modern designs and mission profiles. The original military design later influenced civilian adaptations, such as Springfield Armory's M6 Scout.

Civilian production

In the late 1970s, , introduced the M6 Scout as a direct civilian replica of the original military M6 Aircrew Survival Weapon, adapting its compact over-under design for commercial sale. The firearm was manufactured by Česká Zbrojovka (CZ) in the and imported by , based in , with key modifications to ensure compliance with U.S. civilian regulations. To avoid classification as an "Any Other Weapon" under the , the barrels were extended to 18.25 inches, compared to the military version's 14-inch barrels. Production of the M6 Scout continued intermittently from the late 1970s until its discontinuation in March 2008, after which no further imports were made by . For civilian market suitability, the design incorporated an oversized , originally intended to accommodate gloved or mittened hands in cold-weather scenarios, while also addressing liability and safety standards for non-military users. Positioned as a versatile , the M6 Scout appealed to hunters, campers, and outdoorsmen seeking a lightweight, takedown for small game and emergency use in remote environments.

Configuration and features

The Springfield Armory M6 Scout employs a superposed over-under barrel configuration, with the barrel positioned above the barrel, enabling versatile use in scenarios. This design incorporates a break-action mechanism that allows for rapid loading and unloading of in each barrel. The firearm's construction utilizes a stamped sheet for the receiver, paired with forged barrels, emphasizing lightweight durability suitable for portable kits. It lacks a traditional or , instead featuring a folding wire buttstock that collapses alongside the receiver via a hinge pin, creating a compact pistol-grip configuration for storage. For sighting, the M6 Scout is equipped with fixed , including a front post with protective wings and a rear flip-up sight offering both a peep aperture for the barrel and a V-notch for the barrel. Safety features include a manual hammer selector with three positions—a neutral safe mode, one for firing the upper barrel, and one for the lower barrel—integrated into the design for selective barrel operation. Caliber configurations vary across models, typically pairing .22 rimfire options in the upper barrel with in the lower.

Mechanism and operation

The Springfield Armory M6 Scout employs a break-action mechanism, where a on the top of the receiver is pushed to the side to unlock the barrels, allowing them to pivot downward at the hinge for loading and unloading. This design facilitates single-shot loading of one rimfire cartridge in the upper barrel and one shotshell in the lower barrel, with an automatic extractor that raises spent casings for easy removal upon opening. Once loaded, the barrels are closed by swinging them upward until the breech lock engages, simultaneously cocking the internal hammer. The trigger system consists of a non-traditional squeeze-bar located beneath the receiver in place of a conventional trigger and guard, enabling operation even with gloved hands in conditions. A knurled selector knob protrudes from the exposed at the rear of the receiver; rotating it upward selects the upper barrel, downward selects the lower barrel, and positioning it midway (often with a quarter-turn counterclockwise) engages the to block firing. The firing sequence begins with the safety disengaged and the desired barrel selected; squeezing the bar pulls the hammer forward via a simple linkage, striking the aligned with the chosen barrel to ignite the primer—no double-action mode is available, requiring manual cocking via the break-action. For disassembly, the unloaded is first broken open, then the barrels are separated from the receiver by driving out the pin (often captive in modern variants to prevent loss), allowing the unit to divide into two main components for or compact storage. Basic field maintenance involves the bores and chambers with , wiping faces, and lightly lubricating the pin and to prevent in harsh environments. The design's minimal —primarily the , selector, and extractor—enhance reliability in survival scenarios, with robust forged components reducing failure rates even after prolonged storage without attention.

Variants

Caliber configurations

The Springfield Armory M6 Scout was produced in three primary caliber configurations for its over/under barrel design, each pairing a rimfire or centerfire rifle cartridge in the upper barrel with a .410 bore shotgun shell in the lower barrel. The most common civilian variant features .22 Long Rifle (.22 LR) over .410 bore, optimized for small game hunting and birdshot applications due to the .22 LR's low recoil and widespread ammunition availability. Another option is .22 Winchester Magnum Rimfire (.22 WMR) over .410 bore, which provides enhanced terminal performance and effective range compared to .22 LR for similar survival uses. The third configuration, .22 Hornet over .410 bore, mirrors the original military M6 design and offers higher velocity for small game, serving as a tribute to its heritage while maintaining versatility in compact form. In all configurations, the upper barrel is rifled to stabilize the projectiles, while the lower barrel remains to accommodate .410 shotshells, typically chambered for 3-inch loads to support a range of shot sizes for close-range or . These pairings emphasize multi-role utility in scenarios, allowing users to switch between small-caliber fire for precision shots and shotgun blasts for broader coverage without changing firearms. Barrels are fixed to the receiver and not designed for user-level interchangeability between calibers, requiring factory modification or specialized gunsmithing for any reconfiguration to ensure proper headspacing and safety.

Finish and accessory options

The M6 Scout was offered in two primary finish options to suit different environmental needs and aesthetic preferences. The featured a Parkerized finish, consisting of a matte black phosphate coating that provides corrosion resistance and a utilitarian military-style appearance similar to that of the . Alternatively, a version was available, offering enhanced durability and rustproof qualities particularly beneficial in wet or humid conditions. Early production models of the M6 Scout were equipped with basic iron sights for close-range targeting, emphasizing its role as a lightweight survival tool. Later civilian variants incorporated factory or aftermarket Picatinny rails on the top and sides, allowing users to mount optics such as scopes, red dot sights, lasers, or tactical lights while maintaining the rifle's compact profile. These rails enhanced without significantly increasing weight, compatible with standard accessories across caliber configurations like over . Beyond factory integrations, owners often added aftermarket options to improve carry and utility. Common additions include quick-detach slings with swivel mounts for hands-free transport during or scenarios, shell holders designed to store extra .410 rounds on the stock, and synthetic grip extensions for better handling in adverse weather. These are not standard from but are widely available from third-party manufacturers. Due to the M6 Scout's folding, ultra-compact design intended for carry, customization emphasizes low-profile, accessories to avoid compromising portability or balance.

Modern reproductions

Following the discontinuation of the original M6 Scout in 2008, manufacturers such as and TPS Arms have produced modern clones that replicate the design with expanded options. These include additional caliber configurations like , , and dual barrels, along with updates such as interchangeable choke tubes and increased ammunition storage capacity in the stock. construction remains available for corrosion resistance. As of 2024, these reproductions are actively produced and sold.

Specifications

Physical characteristics

The Springfield Armory M6 Scout features an overall length of 32 inches (81 cm) when unfolded and 18.25 inches (46 cm) when folded, with a barrel length of 18.25 inches (46 cm). This configuration allows for compact storage while maintaining sufficient barrel length for effective use. Unloaded, the M6 Scout weighs 4.7 pounds (2.1 kg), emphasizing its lightweight construction ideal for backpack carry in survival scenarios. The receiver is built from stamped sheet steel, balancing durability and minimal weight. Ergonomically, the design incorporates a for secure handling and an oversized to accommodate gloved operation in adverse conditions. The folding stock mechanism enhances overall compactness for transport, and it includes dual aperture sights optimized for the rifle and barrels.

Ammunition and capacity

The Springfield Armory M6 Scout's upper rifle barrel is compatible with .22 Long Rifle (.22 LR) ammunition up to 40-grain bullets, (.22 WMR) up to 50-grain bullets, or up to 45-grain bullets, depending on the variant's caliber configuration. The lower shotgun barrel accepts 2.5-inch or 3-inch shotshells, including birdshot, buckshot, or slugs, providing versatility for small game or defense. As a break-action, combination , the M6 Scout has a capacity of one round per barrel, allowing simultaneous loading of one and one shotshell with no internal . The synthetic stock includes a compartment for spare ammunition storage, typically holding 15 rounds of .22 LR or 12 rounds of in addition to 4 .410 shells, facilitating extended field use. In terms of basic performance, the barrel offers an effective range of approximately 50 yards for small game, while the is effective at 10 to 25 yards with shot loads or slugs. To maintain reliability, especially with mixed and , the barrels should be cleaned after each use to prevent residue buildup from fouling the action or bores.
Add your contribution
Related Hubs
User Avatar
No comments yet.