Community hub
0 subscribers8 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to Vector Informatik.
Nothing was collected or created yet.
Vector Informatik
View on Wikipediafrom Wikipedia
Key Information
Vector Informatik develops software tools and components for networking of electronic systems based on the serial bus systems CAN, LIN, FlexRay, MOST, Ethernet, AFDX, ARINC 429,[4] and SAE J1708 as well as on CAN-based protocols such as SAE J1939, SAE J1587, ISO 11783, NMEA 2000, ARINC,[4] CANaerospace,[4] CANopen and more. The headquarters of the company Vector Informatik GmbH is in Stuttgart, Germany. Subsidiaries include Braunschweig, Munich, Hamburg, Regensburg along with international subsidiaries in Brazil, China, France, Italy, England, India, Japan, South Korea, Austria, Sweden, and the USA. Vector Informatik also includes Vector Consulting Services GmbH, a consultation firm specializing in optimization of technical product development. Altogether, these companies are referred to as the Vector Group.
History
[edit]Vector Software GmbH was founded on April 1, 1988 by Eberhard Hinderer, Martin Litschel and Helmut Schelling. In the year 1992, the company changed its name to Vector Informatik GmbH. In the same year, the first CANalyzer license was sold and the company attained sales of one million Euros for the first time. In 1996, the first CANoe and CANape licenses were sold.
In 1998, Vector CANtech (USA) was founded, and in the following year Vector Japan. In 2001, the subsidiary Vector Consulting GmbH was founded, which offers consultation services for engineering development and its cost effectiveness. In 2006, Vector Informatik acquired "Division 4m Software" from Micron Electronic Devices AG. In the same year, sales of the Vector Group exceeded the 100 million Euro mark for the first time. In the following year, Vector Korea was founded, and in 2009 Vector Great Britain, Vector Informatik India and Vector China.[5] 2011 the previous representation office in China was converted into a legally independent business.[6] In August 2011 the four owners of Vector Informatik GmbH have transferred their business shares to a family foundation and a non-profit foundation.[7] In September 2011 Vector has welcomed its 1,000th employee.[8] In 2013, a new subsidiary Vector Austria was established,[9] followed 2014 by Vector Brasil and Vector Italy.[10][11]
Fields of Activity
[edit]As mentioned above, Vector handles networking of electronic systems based on the serial bus systems CAN, LIN, FlexRay and MOST as well as CAN-based protocols such as SAE J1939 and CANopen. Electronic control modules in vehicles are clearly the company's focus. However, experience gained in this area has also been applied to other areas such as avionics,[4] heavy-duty vehicles, special machines, and embedded systems in general. A selection of press releases provides additional background:
- Diagnostic validation with GM[12]
- AUTOSAR PDUs with FlexRay at AUDI[13]
- Optimizing driver assistance systems at BMW[14]
- XCP-on-FlexRay at Audi[15]
- Efficiency and quality in gear drive calibration at ZF[16]
- Wireless interfacing of development and analysis tools at Bomag AG[17]
- Integrated diagnostic and flash solution for LuK GmbH[18]
- Car2x/DSRC communication[19]
Products
[edit]Some of the company’s key products are:
- The CANalyzer analysis tool for CAN, FlexRay, Ethernet, LIN and MOST as well as other CAN-based protocols.
- The CANoe development tool with support for simulation, diagnostics and as a test tool for automotive ECUs. Used at most automotive and truck OEMs and suppliers
- CANape is a development software, widely used by OEMs and ECU suppliers of automotive industries to calibrate algorithms in ECUs at runtime.
- Embedded software components for CAN, FlexRay, LIN, AUTOSAR and others. These components can be found on nearly all automobiles with networked electronics throughout the world.[20]
References
[edit]- ^ Imprint of Vector Informatik website
- ^ Revenue 2021 in Federal Gazette: Bundesanzeiger (ger))
- ^ a b Press Release "Vector Introduces New Configurable Test System for Charging Communication Tests"
- ^ a b c d [https://www.vector.com/int/en/products/industries/avionics-networking/#c113506 Supported Bus Systems and Protocols on vector.com], loaded April 9th, 2025
- ^ Address information
- ^ Press release "Vector establishes subsidiary in China"
- ^ Press release "Holders transfer ownership of Vector Informatik GmbH to two foundations"
- ^ Vector Company History
- ^ Press Release "Vector opens subsidiary in Austria" (PDF; 383 kB)
- ^ Press Release "Vector Informatik opens subsidiary in Brazil" (PDF; 360 kB)
- ^ Vector Company History, loaded March 14th, 2024
- ^ Diagnostic Validation with GM
- ^ "AUTOSAR PDUs with FlexRay at AUDI" (PDF). Archived from the original (PDF) on 2017-08-29. Retrieved 2015-03-05.
- ^ "Optimizing driver assistance systems at BMW" (PDF). Archived from the original (PDF) on 2017-08-29. Retrieved 2015-03-05.
- ^ "XCP-on-FlexRay at Audi" (PDF). Archived from the original (PDF) on 2016-03-03. Retrieved 2015-03-05.
- ^ "Efficiency and quality in gear drive calibration at ZF" (PDF). Archived from the original (PDF) on 2015-04-02. Retrieved 2015-03-05.
- ^ "Wireless interfacing of development and analysis tools at Bomag AG" (PDF). Archived from the original (PDF) on 2017-08-09. Retrieved 2015-03-05.
- ^ "Integrated diagnostic and flash solution for LuK GmbH" (PDF). Archived from the original (PDF) on 2016-03-04. Retrieved 2015-03-05.
- ^ (German)Barbara Lange: CANoe.IP unterstützt Car-to-Car-Entwicklung in iX. Heise Verlag, Hannover 9/2009, SSN 0935-9680.
- ^ "German report of the Chamber of Commerce for the Stuttgart Region: Stuttgart-based Vector Informatik GmbH is world leader in software for networked electronic systems in automobiles". Archived from the original on 2012-09-07. Retrieved 2009-06-09.
Vector Informatik
View on Grokipediafrom Grokipedia
Vector Informatik GmbH is a leading German software company headquartered in Stuttgart, specializing in the development of tools, components, and services for embedded electronics and their networking, primarily in the automotive sector but also extending to avionics, medical technology, and transportation industries.[1][2]
Founded on April 1, 1988, as Vector Software GmbH by Eberhard Hinderer, Martin Litschel, and Dr. Helmut Schelling in Ditzingen, Germany, the company initially focused on software for NC-controlled machine tools before pivoting to automotive networking solutions.[3] It was renamed Vector Informatik GmbH in 1992, marking the delivery of its first CANalyzer license, a tool for analyzing Controller Area Network (CAN) systems.[3]
Over the decades, Vector has grown significantly, reaching over 1,000 employees by 2011 and surpassing 4,500 worldwide as of 2024, with 32 subsidiaries across Europe, the Americas, Asia, and other regions.[3][4] Key milestones include the 1996 launch of flagship products like CANoe for simulation and testing, and CANape for measurement and calibration; the 2009 establishment of international subsidiaries in the UK, India, and China; and acquisitions such as Vector Software Inc. in 2017 to bolster its software verification capabilities.[3] Today, as part of the Vector Group, the company emphasizes software-defined vehicles, cybersecurity, functional safety per ISO 26262, and standards like AUTOSAR, while offering around 75 products including hardware interfaces, embedded software libraries, and cloud-based services. In recent years, Vector has expanded through partnerships, such as with Synopsys and QNX for advancing software-defined vehicle development.[1][2][5][6]
Company Overview
Founding and Headquarters
Vector Informatik was founded on April 1, 1988, as Vector Software GmbH by Eberhard Hinderer, Martin Litschel, and Dr. Helmut Schelling.[3] The company was established in Ditzingen, near Stuttgart, Germany, with an initial focus on software solutions for NC-controlled machine tools.[3] The company later pivoted to automotive electronics and bus systems, including the emerging Controller Area Network (CAN) technology, laying the groundwork for Vector's specialization in tools for vehicle communication and diagnostics.[3] In 1992, the company was renamed Vector Informatik GmbH, reflecting its evolving expertise in informatics and software solutions for complex systems.[3] By 1994, Vector had reached an early growth milestone with the hiring of its 25th employee, signaling steady expansion in its core engineering workforce.[3] The company's headquarters are located in Stuttgart, Germany, at Holderäckerstraße 36, 70499 Stuttgart, serving as the central hub for research and development activities.[7] This main facility coordinates global operations and houses key teams dedicated to innovating software and hardware solutions for automotive embedded systems, with additional logistical addresses for deliveries at Motorstraße 56 in the same district.[7] The Stuttgart location underscores Vector's deep roots in Germany's automotive engineering ecosystem, providing a collaborative environment for R&D focused on industry-standard technologies.[7]Global Presence and Operations
Vector Informatik operates through 32 locations worldwide, spanning Europe, North America, Asia-Pacific, and South America, enabling it to support international clients in the development of electronic systems.[4] The company maintains subsidiaries in key markets, including Vector North America in the United States, Vector Japan Co. Ltd. in Japan, Vector Automotive Technology (Shanghai) Co., Ltd. in China, Vector Informatik India Pvt. Ltd. in India, Vector Informática Brasil Ltda. in Brazil, and European entities such as Vector Austria GmbH, Vector France S.A.S., Vector Iberia SL in Spain, and operations in Romania.[4][8] As of 2025, the company employs over 4,500 people globally, with a focus on engineering and software expertise.[4] The Vector Group achieved revenue of 1.16 billion euros in 2023, reflecting its scale in providing tools and components for embedded systems.[9] Operationally, Vector emphasizes R&D centers for innovation in automotive networking and diagnostics, alongside sales offices and customer support teams that cater to global suppliers, ensuring localized assistance and rapid response to industry needs.[4] In recognition of its workplace culture, Vector secured first place in the "Germany's Best Employers 2025" ranking for companies with 2,001 to 5,000 employees, based on employee feedback regarding work environment and professional development.[10]History
Early Years and Development
Vector Informatik, originally founded as Vector Software GmbH on April 1, 1988, by engineers Eberhard Hinderer, Martin Litschel, and Dr. Helmut Schelling, initially concentrated its engineering efforts on developing software tools for numerical control (NC) machine tools before pivoting to automotive applications.[3] The company's early technological foundation centered on advancing the networking of electronic systems in vehicles, particularly through tools for serial bus systems such as the Controller Area Network (CAN), which was emerging as a standard for reliable communication in automotive electronics.[3] In 1992, Vector Informatik—renamed from Vector Software GmbH that same year—achieved a key milestone with the delivery of its first CANalyzer license, a tool for analyzing CAN bus communications, marking the company's entry into specialized automotive networking solutions.[3] This period saw the firm establishing an initial customer base in the automotive industry, including major players like Daimler-Benz, Siemens, Bosch, and General Motors, with adoption of ECU (Electronic Control Unit) software tools beginning in 1994.[3] By 1992, the company's turnover had exceeded 2 million Deutsche Marks, signaling early financial stability and growth from its startup phase.[3] The late 1990s solidified Vector's position as an established firm in automotive tool development, highlighted by the 1996 launch of its first licenses for CANoe, a comprehensive simulation and analysis tool for CAN networks, and CANape, a measurement and calibration tool tailored for ECU development.[3] These products addressed the growing complexity of vehicle electronics by enabling efficient simulation, diagnostics, and calibration of networked systems, with CANape building on the CAN Calibration Protocol (CCP) specification from the mid-1990s.[11] Early growth indicators included reaching the 25th employee in 1994 and the 100th by 1999, reflecting a transition to a more robust organization supported by its automotive-focused innovations.[3]Growth, Acquisitions, and Milestones
Vector Informatik experienced significant growth in the 2000s, marked by expanding sales and strategic acquisitions. In 2006, the company acquired the 4m Software Division from Micron Electronic Devices AG, enhancing its software development capabilities for automotive applications. That same year, Vector's group turnover surpassed 100 million EUR for the first time, reflecting robust demand for its embedded systems tools.[12] The 2010s saw accelerated expansion through international presence and key integrations. In 2010, aquintos! became part of the Vector Group. By 2017, Vector acquired Vector Software, Inc., based in the USA, and Timing-ArchitectsEmbeddedSystems GmbH, to bolster its embedded software testing and multicore design solutions, including the VectorCAST platform for code-centric testing. This period also coincided with the company surpassing 2,000 employees worldwide and achieving group revenue exceeding 500 million EUR. In 2018, Vector completed three acquisitions: Squoring Technologies for IT project management tools, ARCCORE for AUTOSAR-based embedded software expertise, and Tesis DYNAware for ECU simulation models, strengthening its portfolio in software quality and dynamic testing environments. These moves contributed to Vector's 30th anniversary celebrations that year.[12][13][14][15] Entering the 2020s, Vector continued its acquisition strategy to address emerging needs in automated and connected systems. In 2022, the company acquired Gimpel Software LLC, integrating the PC-lint static code analysis tool to improve software reliability in embedded and connected systems. The following year, 2023, Vector acquired BASELABS GmbH, a specialist in sensor data fusion for automated driving, enabling advanced ASIL-D certified solutions for environmental perception. In 2024, Vector acquired a majority stake in EYYES GmbH in March for AI and camera sensor technology, and fully acquired Computer-Systeme-Messtechnik (CSM) GmbH on July 1, expanding its measurement technology offerings for in-vehicle data acquisition and analysis. By this point, Vector had completed a total of eleven acquisitions since 2006, focusing on complementary technologies in testing, simulation, and validation.[16][17][9][18] Alongside these integrations, Vector achieved notable operational milestones. Employee numbers grew from over 3,000 in 2020 to welcoming the 4,000th staff member in 2023, supporting global operations across multiple continents. In 2025, Vector formed a strategic collaboration with Synopsys, announced on March 10, to advance software-defined vehicle development through pre-integrated solutions for digital twins, software factories, and continuous integration, reducing development costs and enhancing quality in automotive electronics. Later that year, in June, Vector signed a Memorandum of Understanding with BlackBerry's QNX division to co-develop a foundational vehicle software platform for software-defined vehicles.[12][19][20]Business Areas
Automotive Sector
Vector Informatik has established itself as a key provider of tools and components for the development of embedded electronics in the automotive industry, supporting the networking of electronic systems in vehicles for over 35 years.[4] The company focuses on enabling efficient processes for automotive manufacturers and suppliers, particularly in the areas of electromobility, functional safety, and cybersecurity, with solutions certified to standards like ISO 26262 up to ASIL D and TISAX Assessment Level 3.[4] Its offerings address the growing complexity of vehicle electronics, including support for modern mobility solutions that integrate advanced powertrains and connected systems.[4] In ECU development, testing, and calibration, Vector provides comprehensive solutions that leverage automotive bus systems such as CAN, LIN, FlexRay, MOST, Ethernet, and 802.11p for communication and data exchange.[1] These tools facilitate real-time measurement, data acquisition, and diagnostics, allowing engineers to analyze and optimize ECU performance during the development lifecycle.[21] Network simulation capabilities enable the modeling of bus interactions, while flashing tools support secure reprogramming of ECUs over these protocols, ensuring compliance with industry requirements for reliability and efficiency.[22] Additionally, Vector's solutions integrate with AUTOSAR standards through its MICROSAR embedded software, which includes runtime environments and basic software modules tailored for classic ECUs, promoting standardized and scalable development.[23] Vector holds a leading market position as a manufacturer of software tools and components for automotive electronic systems, with over 4,500 employees across 32 global locations serving major OEMs and Tier 1 suppliers.[4][24] The company's emphasis on safety and security extends to automated driving features, enhanced by its 2023 acquisition of BASELABS, which specializes in sensor data fusion for environmental perception in highly automated vehicles.[17] This integration bolsters Vector's capabilities in developing safety-critical applications, such as sensor fusion for ADAS and autonomous systems, aligning with the sector's shift toward software-defined vehicles.[25] In 2024, Vector further strengthened its measurement technology offerings through the full acquisition of CSM GmbH, a specialist in hardware and software for vehicle measurement applications, enhancing real-time data acquisition and testing capabilities.[9]Other Industries
Vector Informatik has extended its expertise in embedded systems and networking to non-automotive sectors, adapting its tools to meet the demands of complex, distributed environments in industrial automation, transportation infrastructure, and high-reliability applications.[26] In industrial applications, Vector provides testing solutions tailored for Industry 4.0 initiatives, the Industrial Internet of Things (IIoT), and smart manufacturing processes. These tools support the development and validation of IoT systems and devices, enabling efficient simulation, requirements engineering, and testing of distributed cyber-physical systems across all project phases, including building automation.[27][28] For rail and transport sectors, Vector offers engineering solutions for railway systems, including train and track control, passenger entertainment systems, and monitoring infrastructure. Following the 2024 acquisition of EYYES GmbH, an Austrian specialist in AI and camera sensor technology, Vector enhanced its portfolio for applications in trams, commercial vehicles, construction machinery, and traffic management systems, integrating AI-driven video analytics for safety and efficiency.[29][30][18] In other sectors, Vector supports medical device manufacturers with a comprehensive platform for developing safe, reliable, and certifiable embedded systems, covering simulation, testing, and compliance for complex med-tech applications. In aerospace, the company delivers tools for software testing, system validation, field trials, and network stimulation in avionics, including solutions for hybrid-electric aviation to facilitate electronic networking and interoperability. Additionally, Vector's embedded systems tools are applied in non-vehicle contexts, such as networked devices requiring robust diagnostics and calibration.[31][32][33] The expansion into these industries is driven by adaptations of Vector's core networking technologies, originally developed for bus systems, to scalable architectures that handle multi-sector requirements for interconnected, software-defined environments. This emphasis on scalability allows seamless integration of tools like static code analysis, unit testing, and hardware-in-the-loop simulations across diverse applications.[34][35]Products and Services
Software Tools
Vector Informatik offers a comprehensive suite of software tools designed to support the development, analysis, testing, and calibration of embedded systems, particularly in networked environments like automotive electronics. These tools facilitate the entire development lifecycle, from early design phases to validation and deployment, ensuring compliance with standards such as AUTOSAR and ISO 26262. With approximately 75 products in total across software, hardware, and embedded components, Vector's software portfolio emphasizes modularity and integration to streamline workflows for engineers. Among the flagship tools, CANoe serves as a central platform for simulation, diagnostics, testing, and analysis of entire ECU networks, supporting protocols like CAN, LIN, FlexRay, and Ethernet in both software-in-the-loop (SIL) and hardware-in-the-loop (HIL) environments. CANalyzer complements this by focusing on detailed analysis and targeted stimulation of network communications, enabling developers to monitor and debug data traffic in real-time. For measurement and calibration, CANape provides automated parameterization of ECUs, with features for data acquisition, visualization, and scripting to optimize control unit performance during development. DiVa specializes in automated testing of diagnostic implementations in ECUs, generating test cases from specifications and executing them to verify compliance with standards like UDS and DoIP.[36] In the realm of embedded software, Vector's MICROSAR solutions ensure AUTOSAR compliance for both Classic and Adaptive platforms, providing modular basic software stacks for operating systems, communication, diagnostics, and runtime environments in ECUs. These include integrated security modules for threat analysis, risk assessment (TARA), and cryptographic functions to protect against cyber threats, such as secure boot and over-the-air updates. Following the 2022 acquisition of Gimpel Software, Vector incorporated PC-lint Plus for static code analysis, which detects potential defects, enforces coding standards, and supports functional safety certification by analyzing C/C++ source code without execution.[37][38][39] Vector's tools extend to the upstream development process through PREEvision, which enables model-based systems engineering (MBSE) with support for requirements engineering, functional specification, logical design, and physical implementation via the RFLP (Requirements-Functional-Logical-Physical) methodology. This includes bidirectional traceability from requirements to implementation artifacts, SysML-based modeling for system behavior, and integration with AUTOSAR for seamless handoff to downstream tools like CANoe. Additional major software products, listed alphabetically for overview, include:- DAVINCI: Configuration tool for ECU software development and variant management.
- Security Manager: Platform for testing security mechanisms in protected ECUs, including intrusion detection simulation.