Hubbry Logo
W16 engineW16 engineMain
Open search
W16 engine
Community hub
W16 engine
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
W16 engine
W16 engine
from Wikipedia
2005–2011 Bugatti Veyron engine

A W16 engine is a sixteen-cylinder piston engine with four banks of four cylinders in a W configuration.

W16 engines are rarely produced, with the notable exception of the Volkswagen Group 8.0 WR16 engine, which has been used since 2005 in the Bugatti Veyron, Bugatti Chiron and their related models.

Volkswagen Group

[edit]

The W16 engine that Volkswagen Group uses in its Bugatti Veyron and Chiron has a displacement of 8.0 L (488 cu in) and four turbochargers. It is effectively two narrow-angle VR8 engines (based on the VR6 design) mated at an included angle of 90 degrees on a common crankshaft.[1]

The most powerful version of this engine, installed in the Bugatti Bolide,[2] generates 1,361 kW (1,825 hp; 1,850 PS) at 7,000 rpm.[3][4]

At the 1999 Geneva Auto Salon, Bentley presented Hunaudières, a concept two-seated mid-engined car with an 8-litre W16 engine. The engine was the basis for the Bugatti Veyron.[5]

Another concept car from Volkswagen Group to have the W16 engine is the Audi Rosemeyer, introduced in 2000 and shown at various auto salons. The engine fitted to Rosemeyer is the only W16 variation to have five valves per cylinder.

Other manufacturers

[edit]
1916 Gaston Mougeotte W16 engine

In 1916, a rotary valve W16 engine was built in France by Gaston Mougeotte.[6]

The Jimenez Novia, a one-off sports car built in 1995, used a W16 engine with two crankshafts.[2] Built by combining four Yamaha FZR1000 inline-four motorcycle engines, the engine has a displacement of 4.0 L (244 cu in), eight camshafts and five valves per cylinder, and produces 560 bhp (418 kW; 568 PS).[2][7]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia
from Grokipedia
The W16 engine is a quad-turbocharged, 16-cylinder with an 8.0-liter displacement, arranged in a compact W configuration consisting of two narrow-angle V8 banks positioned at 90 degrees to each other and sharing a single . Developed by the specifically for hypercars, it represents the only production 16-cylinder in the world, renowned for its extreme and engineering complexity. Conceived in 1997 by , then chairman of the , the W16 engine originated as part of a vision to create the world's fastest production car, leading to its debut in the 16.4 in 2005. The engine's development involved over 16,000 hours of testing and 500,000 kilometers of endurance runs, with initial prototypes achieving more than 1,000 PS in 2001. Hand-assembled from over 3,500 components by two specialists over six days, it features a square bore and stroke of 86 mm each, a duplex system with 32 valves, and Bugatti Ion Current Sensing for real-time combustion monitoring. Its asymmetric , with 45-degree intervals, produces a distinctive exhaust note, while a system and advanced cooling—using 40 liters for high-temperature circuits and 15 liters for low-temperature—ensure reliability under extreme conditions. In its initial Veyron application, the engine delivered 1,001 PS (736 kW) at 6,000 rpm and 1,250 Nm of torque, enabling a top speed of 407 km/h. Subsequent evolutions increased output progressively: the Veyron Super Sport reached 1,200 PS, while the variant produced 1,500 PS (later 1,600 PS or 1,177 kW at 7,050 rpm in models like the Chiron Super Sport and Centodieci), with maximum torque of 1,600 Nm available from 2,250 to 7,000 rpm. Powered by four sequential turbochargers in a two-stage setup—each handling approximately 380 PS—and water/air intercooling, the W16 has propelled every hypercar since the Veyron, including the , Divo, Centodieci, and the open-top Mistral roadster. The W16's significance lies in its role as a pinnacle of , enabling record-breaking performance such as the Chiron's 490 km/h top speed while maintaining drivability through integration with a seven-speed and all-wheel drive. However, with production of the Mistral marking the final series-built application, announced in 2022 that the W16 era would conclude, transitioning to hybrid powertrains like the naturally aspirated V16 in the . This engine not only defined an era of hypercar innovation but also showcased advancements in turbocharging, materials, and thermal management that influenced high-performance automotive design.

Overview

Definition and configuration

A W16 engine is a sixteen-cylinder piston engine featuring four banks of four cylinders each, arranged in a configuration that effectively combines two narrow-angle V8 units sharing a common . This layout positions the cylinders in four parallel rows, with two outer banks and two inner banks staggered to form the distinctive W shape when viewed from the end, enabling a narrower overall profile than traditional multi-cylinder designs. The configuration allows for compact packaging of a high number of cylinders, reducing the engine's length and height compared to flat or opposed-piston layouts that would require greater width or separation for similar displacement. The only production W16 engine is the Bugatti's 8.0-liter quad-turbocharged unit, while non-production examples exist in concept and experimental vehicles. In operation, the W16 follows the standard four-stroke cycle common to most engines: , compression, power, and exhaust strokes. Each reciprocates within its , connected via connecting rods to the shared crankshaft, which converts the into rotational across all sixteen cylinders firing in sequence. Valve in this arrangement typically employs dual overhead camshafts per bank to precisely control the opening and closing of and exhaust valves, ensuring efficient despite the complex geometry of the staggered banks. Visually, the W16 differs from a V16, which uses two broad banks of eight cylinders each at a wide angle, or an H16, which arranges two flat-eight engines in an opposed horizontal setup; instead, the 's four closely spaced banks create a compact, profile resembling the letter "," with the inner banks nestled between the outer ones for optimized space. The represents an extension of the broader family, which includes configurations like the W8 and W12 as conceptual precursors using similar multi-bank principles.

Comparison to other multi-cylinder layouts

The W16 engine offers significant packaging advantages over other high-cylinder-count layouts, particularly in its narrower and shorter profile compared to a V16, which features two long banks of eight cylinders that result in greater overall length and width. This compact W configuration, formed by four banks of four cylinders arranged in a narrow-angle shape sharing a single , allows the W16 to achieve dimensions similar in length to a conventional V8 while providing the displacement of 16 cylinders, facilitating superior integration into low-slung hypercar where space is at a premium. In terms of balance and , the W16's provides inherent smoothness through its opposed arrangement, which helps cancel primary and secondary forces more effectively than an inline-16—whose extreme length would amplify torsional s—or a flat-16, whose wide boxer layout increases lateral forces despite good opposition. While not perfectly self-balanced like a V12, the W16's 90-degree separation minimizes secondary imbalances, resulting in lower levels suitable for high-revving applications without extensive counterbalance shafts. The W16 introduces greater complexity than simpler V8 or V12 layouts, with a higher parts count—including four cylinder heads, multiple camshafts, and intricate —leading to elevated manufacturing challenges and costs, though this is offset by superior from its efficient space utilization and larger total displacement. Compared to a V8, the W16's added cylinders enable higher specific output per liter, but the design demands to manage thermal and structural stresses. Despite these benefits, the W16 incurs drawbacks in fuel consumption and emissions relative to fewer-cylinder turbocharged engines like modern V8s, due to its larger displacement and weight, which increase pumping losses and thermal inefficiency; additionally, its broader frontal area in some installations can elevate aerodynamic drag, while the overall penalty hampers compared to lighter V12 alternatives.
Engine LayoutCylindersTypical Length (mm)Typical Width (mm)Typical (mm)Typical Dry (kg)Typical Power-to-Weight (hp/kg, engine)
W1616~710~889~730400~3.8
V1616~1200~900~700~450~2.2
W1212513710715245~2.0
V121211081010700308~1.6

History and development

Early W engine concepts

The origins of W engine architectures trace back to early 20th-century , where the need for compact, high-power propulsion in drove innovative multi-cylinder configurations. The , developed by starting in 1917, was a pioneering featuring a broad-arrow layout with three banks of four cylinders each arranged at 60-degree intervals around a common . This liquid-cooled, 24-liter powerplant produced up to 450 horsepower and powered numerous British from 1918 through the 1920s, demonstrating the W configuration's advantages in reducing frontal area and weight compared to inline or V engines of similar displacement. Its success in racing, including multiple wins, established the W12 as a viable precursor to more complex W layouts. Building on this foundation, the and saw the development of larger W engines for , including rare W18 designs that expanded the concept to three rows of six s for even greater . The 18K, introduced in the mid-, was a water-cooled W18 displacing 36.6 liters and delivering 650 horsepower in direct-drive form, used in experimental French bombers and planes to achieve high speeds while maintaining a relatively narrow profile. Similarly, Italy's produced the Asso 750 W18 in the late , a 47.1-liter engine rated at 750 horsepower for fighters and , highlighting the W18's role in pushing cylinder counts for performance without excessive bulk. These W18s, though limited in production, influenced theoretical adaptations to smaller scales, foreshadowing automotive applications by emphasizing compactness in high-output designs. Efforts to adapt W concepts to automotive use emerged sporadically post-World War II, drawing from pre-war multi-cylinder experiments that prioritized power in streamlined chassis. In the 1930s, Auto Union (a predecessor to modern brands) developed V16 racing engines for its Type C grand prix cars, such as the supercharged 6-liter unit producing over 500 horsepower, which influenced later narrow-angle multi-cylinder layouts by demonstrating the feasibility of high cylinder counts in road-relevant packaging. By the 1950s and 1960s, automotive prototypes explored similar ideas, though full W configurations remained experimental; for instance, various European firms tested clustered cylinder banks derived from aviation tech, but production stalled due to complexity and cost. These efforts laid groundwork for revived interest in the 1980s, when introduced the in 1991—a narrow-angle (15-degree) V6 with five cylinders in staggered rows sharing a single , producing 172 horsepower from 2.8 liters in a compact form suitable for transverse mounting in passenger cars. The evolution toward W16 concepts accelerated in the 1990s, as engineers sought to double VR-style banks for ultra-high performance in racing alternatives to Formula 1's V10s. Conceptual VR8 designs (an extension of the VR6 architecture) and early W8 sketches combined two narrow-angle V4s on a shared , achieving W configurations with reduced length over traditional V8s. A key milestone was the 1999 concept, which featured an 8.0-liter naturally aspirated W16 engine delivering 623 horsepower and 561 lb-ft of torque, designed for prototypes to emphasize extreme and in a mid-engine layout capable of over 217 mph. This non-production design, tested on tracks, highlighted the W16's potential for racing by fitting 16 cylinders into a package akin to a V8, influencing subsequent high-performance engine patents focused on modular, narrow-bank arrangements.

Volkswagen Group's W16 project

Following the Group's acquisition of the brand in 1998, the company initiated an ambitious project to revive as a producer of extreme-performance hypercars, aiming to create a vehicle capable of exceeding 400 km/h (approximately 250 mph). This effort, driven by Chairman , began with his 1997 sketch of an 18-cylinder engine concept drawn on an envelope during a train journey in , which served as the foundational vision for what would evolve into the W16 powerplant. The acquisition provided with the rights to the historic name, previously held by Italian entrepreneur , enabling the launch of a series of concept vehicles to explore this high-speed hypercar idea. Development of the W16 engine progressed through intensive prototyping from 2000 to 2005, primarily at Volkswagen's advanced engineering center in Wolfsburg, Germany, and later at Bugatti's facilities in Molsheim, France. Key milestones included the unveiling of the EB 16/4 Veyron concept at the 2000 Paris Motor Show, which first featured the W16 configuration, and the greenlighting of series production in 2001 after successful initial engine testing that year, where the quad-turbocharged unit achieved its target output of 1,001 PS (736 kW) on the first dyno run. External partners contributed specialized expertise; for instance, British engineering firm Ricardo supported driveline integration efforts, ensuring the engine's immense torque could be effectively managed. This phase involved iterative testing of engine prototypes, transitioning from the initial W18 layout in earlier concepts like the 1999 EB 18/4 Veyron to the more compact W16 arrangement by 2000. Engineers faced significant challenges in adapting the W configuration for ultra-high performance, including the integration of four turbochargers within the narrow W16 layout to boost the 8.0-liter displacement without compromising or reliability. Achieving dual overhead camshafts (DOHC) per required precise design to handle revs up to 6,700 rpm, while implementing a dry-sump system addressed oil management under extreme lateral G-forces exceeding 1.5g during high-speed cornering. These hurdles were overcome through custom test benches developed specifically for engines beyond 12 cylinders and vehicles targeting speeds over 350 km/h, as no prior benchmarks existed; extensive heat management solutions, such as exhaust components, were also essential to dissipate the thermal loads from the quad-turbo setup. The displacement was finalized at 8.0 liters after evaluations of larger conceptual variants, prioritizing balance between and drivability. The W16 engine debuted in production form in the 16.4 in 2005, marking the culmination of the project with the opening of Bugatti's hand-assembly atelier in . Initial engines were meticulously hand-built by a dedicated team of technicians in this facility, reflecting the bespoke nature of the hypercar program. The overall development budget for the Veyron project, encompassing the engine and vehicle, exceeded €1.5 billion ($1.62 billion), underscoring Volkswagen's substantial investment in resurrecting as a pinnacle of engineering innovation.

Technical design

Cylinder arrangement and mechanics

The W16 engine features a distinctive cylinder arrangement consisting of two narrow-angle VR8 blocks sharing a single forged , forming an overall W configuration. Each VR8 block has four cylinder banks arranged at a compact 15-degree , allowing for a single per block, while the two VR8 units are positioned at a 90-degree included relative to each other. This layout enables a more compact packaging compared to a traditional V16, with the cylinders staggered in a narrow V shape to minimize overall engine length and height. The crankshaft is a robust forged component designed in a cross-plane configuration with 45-degree throw angles, effectively mimicking two interconnected cross-plane V8 cranks for improved balance and reduced vibration. Counterweights are integrated along the crankshaft to further dampen harmonics from the 16-cylinder firing sequence, ensuring smooth operation at high RPMs. The firing order follows a sequential pattern of 1-14-9-4-7-12-15-6-13-8-3-16-11-2-5-10, resulting in even 45-degree intervals between combustion events for uniform exhaust pulses and optimal torque delivery. The includes 64 valves total, with four valves per (two and two exhaust), operated by four overhead camshafts—two per VR8 bank—to precisely control timing in the narrow-angle setup. A dry-sump system circulates oil through intricate internal passages, including jets directed at the underside of the pistons for cooling and reduced wear under extreme loads. Cooling is managed by a dual-circuit system, with high-temperature jackets encompassing the s (holding 40 liters) and a low-temperature loop for intercoolers (15 liters), supplemented by dedicated oil coolers to maintain thermal stability across all 16 s.

Key specifications and innovations

The production W16 engine features an 8.0-liter (7993 cc) displacement, achieved through a square bore and stroke configuration of 86 mm each, which facilitates balanced movement and efficient across its 16 cylinders. The is approximately 8:1, varying slightly by model variant (e.g., 8.3:1 in the Veyron), optimized to accommodate high boost pressures while maintaining in a turbocharged setup. This design supports the engine's role as a high-performance unit, enabling substantial power extraction without excessive mechanical stress. In its base configuration as fitted to the , the engine delivers 1001 PS (736 kW) at 6000 rpm, with peak of 1250 Nm maintained flat from 2200 to 5500 rpm for seamless acceleration. Tuned variants, such as those in the Super Sport, elevate output to 1600 PS (1177 kW) and 1600 Nm, achieved through refined calibration and enhanced , demonstrating the engine's adaptability for extreme performance. The induction system employs a quad-turbocharger arrangement, with two smaller turbos per cylinder bank operating in sequential mode—smaller units activating first at low rpm to minimize lag, followed by larger ones for high-end boost—supplemented by water-to-air intercoolers to cool intake charge and sustain under load. This setup generates boost pressures up to 2.8 bar in high-output variants like the Super Sport, contributing to the engine's responsive power delivery across the rev range. Key innovations include a carbon fiber manifold, optimizing paths for improved . connecting rods enhance durability and reciprocating mass reduction, allowing higher rev limits and reduced inertial losses in the . The fuel system incorporates piezoelectric direct injectors, enabling precise, high-pressure (up to 200 bar) fuel delivery for stratified charge and reduced emissions. Additionally, a noise actuation system in the exhaust utilizes active valves to modulate backpressure and sound profile, balancing with an aggressive auditory signature. The engine's power density exemplifies these advancements, calculated as: Power density=total power (PS)displacement (L)\text{Power density} = \frac{\text{total power (PS)}}{\text{displacement (L)}} yielding about 125 PS/L in the base configuration. This metric derives from enhanced volumetric efficiency (η_v > 1.0 under boost) and elevated intake manifold pressure from the turbos, where air mass flow increases proportionally to boost ratio, enabling greater energy release per unit volume via the relation: PVdηvρair(1+boost ratio)P \propto V_d \cdot \eta_v \cdot \rho_{\text{air}} \cdot (1 + \text{boost ratio}) with ρ_air denoting , underscoring the quad-turbo system's role in achieving hypercar-level specific output.

Applications in vehicles

Bugatti Veyron series

The 16.4, introduced in 2005, marked the production debut of the 8.0-liter quad-turbocharged W16 engine, delivering 1,001 PS (987 hp) and enabling a top speed of 407 km/h (253 mph) while accelerating from 0 to 100 km/h in 2.5 seconds. This powertrain, based on the Group's W16 architecture with four turbochargers and duplex , was limited to 300 units for the initial coupe variant to maintain exclusivity. Engine adaptations for the Veyron prioritized street-legal usability alongside extreme performance, featuring a standard quad-turbo mapping that optimized boost for everyday driving while supporting peak outputs at 6,000 rpm. Reinforced pistons, constructed from high-strength aluminum alloys, allowed sustained high-RPM operation up to 6,800 rpm without compromising durability under load. Subsequent variants built on this foundation. The 2009 Veyron Grand Sport convertible retained the original engine configuration and 1,001 PS output, adapting the for open-top use while preserving the W16's core mechanics. In 2010, the Veyron Super Sport introduced enhancements including larger turbochargers and an ECU remap, boosting power to 1,200 PS (1,183 hp) and torque to 1,500 Nm, which propelled it to a verified top speed of 431 km/h. To ensure reliability in a road car capable of track-level abuse, the W16 incorporated redundant cooling circuits with a 40-liter high-temperature cycle across three front radiators and a 15-liter low-temperature cycle featuring two heat exchangers that reduced charge air by up to 130°C. A dry-sump oil scavenging system with 16 drain points further supported high-lateral-force scenarios by efficiently managing lubrication and preventing oil starvation. Veyron production concluded in 2011 for the core models, with the final engines hand-assembled by two dedicated specialists at Volkswagen's facility, each taking six days to complete from 3,712 parts.

Bugatti Chiron and successors

The , introduced in 2016 as the successor to the Veyron series, represents a significant evolution of the W16 engine architecture. The 8.0-liter quad-turbocharged unit was refined with larger turbochargers and increased boost pressure up to 1.85 bar, delivering 1,500 PS (1,103 kW) and 1,600 Nm of torque for enhanced performance while maintaining the core layout from its predecessor. This power enabled an electronically limited top speed of 420 km/h and acceleration from 0 to 100 km/h in 2.4 seconds, positioning the Chiron as a benchmark in hypercar engineering. Key variants of the further optimized the W16 for specific driving dynamics. The 2018 Sport achieved weight reductions of approximately 18 kg through lightweight components like wheels and a fixed rear wing, improving handling and agility without altering the engine's 1,500 PS output. The 2020 Pur Sport, limited to 60 units, retained 1,500 PS but featured a revised gear setup and higher of 6,900 rpm for better track . The 2018 Divo, limited to 40 units, also produced 1,500 PS with enhanced generating up to 456 kg of at 300 km/h, prioritizing cornering over top speed (limited to 380 km/h). In 2021, the Super Sport coupe, limited to 30 units, and the Super Sport 300+ elevated power to 1,600 PS (1,177 kW) via revised turbo mapping and intercooling, with the 300+ achieving a production car speed record of 490 km/h during a one-way run at Volkswagen's test track (limited to 440 km/h in production). Special editions highlighted bespoke interpretations of the W16's capabilities. The 2019 Centodieci, limited to 10 units, produced 1,600 PS (1,578 hp) with tuning inspired by the 1990s EB110, featuring retro-styled and a 20 kg lighter for sharper response. The 2022 La Voiture Noire, a one-off homage to the Type 57 SC Atlantic, retained the standard 1,500 PS but incorporated a custom quad-exit integrated into its carbon-fiber bodywork for a distinctive auditory profile. The lineage concluded with extreme track-oriented models emphasizing the W16's potential. The 2022 , limited to 40 units with deliveries starting in 2024, unleashed 1,600 PS through ECU remapping and optimized boost on 98 RON fuel (with potential for higher output on as demonstrated in the ), prioritizing circuit performance with over 1,800 kg of at 320 km/h. The 2022 Mistral roadster, limited to 99 units, marked the final road-legal application of the W16 with 1,600 PS, celebrating the engine's legacy in an open-top configuration. Throughout its run, the generation and its derivatives remained powered exclusively by internal combustion versions of the W16, though late announcements previewed mild in upcoming powertrains as the era drew to a close.

Other implementations

Concept engines by other manufacturers

While the W16 engine configuration has been predominantly associated with the Volkswagen Group's developments for high-performance vehicles, a few independent manufacturers and engineers have explored non-production W16 designs as experimental concepts, often driven by ambitions for extreme power and unique engineering challenges. These efforts highlight the configuration's potential for compact, high-cylinder-count powerplants, though they remain limited due to complexity and cost. One of the earliest known W16 concepts outside major automakers is the 1995 Jimenez Novia, a one-off French supercar prototype crafted by engineer Ramón Jiménez Saéz. This mid-engine vehicle featured a bespoke 4.1-liter W16 engine assembled from four liquid-cooled Yamaha FZR1000 motorcycle four-cylinder engines, each contributing 1,027 cc, arranged in a narrow-angle W formation with two crankshafts and 80 valves total (five per cylinder). The naturally aspirated powerplant produced 560 horsepower at 10,000 rpm and 432 Nm of torque with catalytic converters fitted, or up to 609 hp without them, emphasizing high-revving performance over low-end grunt. Weighing approximately 890 kg, the Novia achieved a claimed top speed of 380 km/h (236 mph), showcasing the W16's viability for lightweight, exotic applications, though it never entered production due to its handmade nature and lack of commercial backing. In the , Australian firm Automobili announced the Marcella hypercar concept, which incorporated a custom 14-liter W16 engine formed by joining two LS7 7.0-liter V8s at a 45-degree angle via a aluminum bridge and shared components. This naturally aspirated setup, developed with input from tuning specialist Steve Morris Engines, delivered an estimated 1,400 horsepower, targeting a three-seater layout with a carbon-fiber for a curb weight under 1,500 kg. Intended as a "hyper-rod" for track and road use, the project aimed to demonstrate affordable high-output engineering using proven American V8 architecture, but it stalled in the phase amid issues and has not progressed to production. These rare concepts underscore the W16's appeal for boutique and experimental projects seeking to rival mainstream hypercar power in a narrower package, influenced indirectly by the Group's successful , yet they faced barriers like emissions compliance and that prevented broader . No major non-VW manufacturer has pursued W16 production, leaving such designs as intriguing footnotes in engine history.

Non-production and experimental uses

The W16 engine has seen limited experimental applications beyond automotive production vehicles, primarily in test mules and concept studies aimed at pushing engineering boundaries. During the development of the , engineers utilized Veyron-derived test mules to validate the updated quad-turbocharged 8.0-liter W16 powerplant, which featured larger turbos. These mules allowed for real-world testing of the engine's 1,500 horsepower output, enhanced cooling systems, and structural integrations under high-speed conditions at tracks like the , ensuring reliability before full vehicle prototyping. A prominent non-production use is the , an experimental track-only hypercar unveiled in 2020 as a demonstrator to explore the limits of the W16 configuration in a lightweight . The employs a race-tuned variant of the engine, delivering 1,850 horsepower on 110-octane fuel and 1,600 horsepower on pump gas, with a of approximately 0.67 kg/hp thanks to extensive carbon fiber usage and minimal bodywork. This setup enabled to test advanced , tire compounds, and for extreme lateral g-forces up to 2.7 g. Production of 40 units began in 2024, with first deliveries to customers in early 2025.

Legacy

Performance achievements

The W16 engine powering the Bugatti Veyron achieved a landmark average top speed of 407 km/h during testing at the Ehra-Lessien proving ground in 2005, marking the first production vehicle to surpass 400 km/h and redefining hypercar performance benchmarks. This feat was accomplished through the engine's quad-turbocharged configuration delivering 1,001 PS, integrated with advanced aerodynamics and all-wheel drive to maintain stability at extreme velocities. The Veyron's accomplishment held as the production car speed record for several years, underscoring the W16's engineering prowess in balancing immense power with controllability. Subsequent iterations of the W16 in the Super Sport 300+ pushed boundaries further, attaining a one-way top speed of 490.48 km/h (304.77 mph) in 2019 at the same track, the first production vehicle to exceed 300 mph. This record, driven by an uprated W16 producing 1,600 PS, highlighted refinements in turbocharging and thermal management that enabled safe operation beyond previous limits, though limited to a prototype run due to tire and constraints. In acceleration, the Veyron's W16 propelled the car from 0 to 100 km/h in 2.5 seconds, a metric that showcased the engine's instantaneous torque delivery of 1,250 Nm via sequential turbo activation. The Chiron's enhanced W16 variant set a production car benchmark with 0-400 km/h in 32.6 seconds, emphasizing sharpened throttle response and weight reduction for superior mid-range surge in models like the Pur Sport. These figures, verified through instrumented testing, illustrate the W16's ability to sustain high-output performance across a broad speed range without compromising drivability. Additionally, the Veyron Super Sport variant, powered by the same W16 architecture, secured multiple titles, including the fastest production car at an average of 431.072 km/h in , validated by independent observers. A key technical achievement of the W16 lies in its adaptive boost-pressure system, which monitors inlet pressure in real-time to inject fuel at constant excess air ratios, enabling sustained output exceeding 1,000 PS without even under prolonged high-load conditions. This innovation, crucial for top-speed runs and track , prevented knock by dynamically adjusting boost across the engine's two banks of eight cylinders, allowing the W16 to deliver consistent in vehicles like the during record attempts.

Discontinuation and future outlook

In 2022, announced that its 8.0-liter quad-turbocharged W16 engine represented "the last of its kind," marking the end of its use in series production hypercars after nearly two decades and powering over 450 units across the Veyron lineup alone, with additional variants like the contributing to a total exceeding 1,000 vehicles. This declaration coincided with the completion of limited-edition models such as the Pur Sport in 2022, which served as one of the final applications of the engine in road-going vehicles. Production of the Mistral roadster concluded in 2025, confirming the definitive end of the W16 era. The phase-out of the W16 was driven primarily by increasingly stringent emissions regulations, including the Euro 7 standards phased in from 2025, which impose severe limits on CO2 and pollutant outputs that a high-displacement, multi-turbo like the W16 struggles to meet without extensive and costly modifications. Additionally, the automotive industry's broader shift toward , propelled by global goals and advancements in hybrid and electric powertrains, rendered the W16's architecture less viable for future high-performance applications. High maintenance demands further compounded the issue, with overall servicing estimated at around €500,000 every four years due to the complexity of its quad-turbo setup and bespoke components. By 2024, transitioned to a new powertrain paradigm with the unveiling of the hypercar, featuring an 8.3-liter naturally aspirated developed by , paired with three electric motors for a combined output of 1,800 PS and marking the marque's first series-production hybrid. This shift effectively ended the W layout in 's production lineup, with the 's design prioritizing a and reduced emissions through . Looking ahead, while no new W16 development projects are planned amid the dominance of hybrid systems in ultra-high-performance vehicles, the engine's components are expected to support aftermarket longevity for existing owners via specialized service networks. Its engineering innovations continue to influence design education in automotive programs, serving as a benchmark for multi-cylinder complexity. Environmentally, the W16's consumption—exceeding 25 L/100 km in combined cycles—highlights the efficiency gains of modern hybrids, which achieve lower real-world emissions despite comparable power levels.

References

Add your contribution
Related Hubs
User Avatar
No comments yet.