Hubbry Logo
14TP14TPMain
Open search
14TP
Community hub
14TP
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
14TP
14TP
14TP
View on Wikipedia
from Wikipedia

The 14TP (Polish: czternastotonowy polski, English: 14-tonne Polish) was a Polish medium cruiser tank that was never completed due to the onset of World War II.

Key Information

Design

[edit]

The project began in 1938. The new tank, which was built off the 10TP design was to significantly improve the performance and quality of the medium tanks. The thickness of the armor on either side would have no less than 35 mm. The tank could mount two types of guns: 37 mm Bofors Cannon, or a new 47-mm gun.[2] To improve speed characteristics it was planned to put in a more powerful 12-cylinder engine (planned capacity from 300 to 400 HP). The design provided that the tank to be fully tracked.

The creation of the tank began with a search for an engine replacement for the American la France, which could not be installed on a new tank, as due to the large mass of the engine would move only under acceptable conditions on the roads. Engineers from BS PZ Inż. made new designs, but they remained only in drawings. As a consequence, it was decided to purchase the engines manufactured by Maybach, which meet the needs of engineers (300 HP).

By the end of 1938, about 60% of the work was completed, and in March 1939, the first tests were planned. However, it turned out that the company had sent 2 defective copies. Talks about the requirement to replace the damaged goods to more powerful semi-automatic engines stalled, leading to a halt of the project. Before the second world war, Poles had not agreed with the firm for the supply of engines. The project remained open, and in September 1939, the plans fell into the hands of the Germans.

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

14TP

View on Grokipedia
from Grokipedia
The 14TP was a Polish medium tank prototype developed in the late 1930s as an evolution of the earlier 10TP design, featuring only tracked propulsion without the convertible wheel-track system, and weighing approximately 14 tons. It was intended to serve as a fast, versatile armored vehicle for the Polish Army in an assault role, but the project reached only about 60% completion before being destroyed during the German invasion of Poland in September 1939 to prevent capture by advancing forces. Development of the 14TP began in 1938 under the auspices of the Biuro Badań Technicznych Broni Pancernych (BBTBrPanc) and the Państwowe Zakłady Inżynieryjne (PZInż), focusing on enhancing armor protection and firepower while retaining high mobility. The design incorporated innovative spawelding construction techniques for improved structural integrity, and it was planned to mount a more powerful engine to achieve speeds of up to 50 km/h on roads. The prototype initially used a 240 hp engine from the , but engine procurement proved challenging; negotiations for a German HL108 unit producing 300 horsepower were ongoing but unresolved at the outbreak of war, leaving the prototype without its final powerplant. Key specifications included a crew of four (driver, co-driver/machine gunner, commander, and gunner) operating within dimensions of 5.4 meters long, 2.5 meters wide, and 2.2 meters high. Armament consisted of a primary 37 mm wz.36 in a two-man turret, with provisions for upgrading to a 47 mm wz.39 cannon, supplemented by two 7.92 mm wz.30 machine guns (one and one in the hull). Armor thickness reached a maximum of 50 mm on the turret front and hull, providing protection against contemporary light anti-tank weapons while maintaining a balance with speed and weight constraints. The suspension drew from Christie principles but was adapted solely for tracks, emphasizing reliability in Polish terrain.

Development

Background and requirements

In the late , the Polish Army faced escalating tensions with , particularly following the remilitarization of the Rhineland in 1936 and the annexation of in , prompting urgent efforts to modernize its armored forces with more capable medium cruiser tanks to counter potential invasions. This push aligned with a 1937 five-year plan aiming to produce 480 light tanks and 64 medium cruisers, recognizing the limitations of existing designs like the and the obsolescence of convertible wheel-track systems. The 14TP project emerged as a direct evolution of the prototype, which had been developed earlier in the decade but suffered from the compromises of its dual wheel-track configuration that restricted armor and armament potential. In late 1938, Polish engineers decided to abandon this convertibility in favor of a fully tracked design, enabling greater weight and enhanced capabilities while retaining the Christie suspension system for improved cross-country performance. Key requirements for the 14TP included a mass of 14-15 tonnes, a maximum road speed of 50 km/h, and integration with domestically produced components such as anti-tank guns to support Poland's independent manufacturing base. Conceptualization was led by the Biuro Badań Technicznych Broni Pancernych (BBTBrPanc) and the Państwowe Zakłady Inżynieryjne (PZInż), state design bureaus tasked with adapting proven technologies to meet these specifications efficiently.

Design and prototyping

The design of the 14TP cruiser tank originated as an evolution of the earlier project, with Polish engineers deciding to scale up the weight to 14 tonnes to accommodate enhanced armor protection and greater firepower while adhering to budgetary and production constraints that limited mass manufacturing of more complex designs. Work on the 14TP began in late 1938 under the auspices of the Biuro Badań Technicznych Broni Pancernych (BBTBrPanc) and Państwowe Zakłady Inżynierii (PZInż), focusing on a fully tracked configuration that eliminated the convertible wheel-track system of the to optimize internal space and weight distribution. Construction of the prototype commenced shortly after the design phase, with the Experimental Workshop in Ursus near assembling components progressively. By the end of 1938, approximately 60% of the parts had been fabricated, including major structural elements of the hull and turret ring, positioning the project for timely advancement. However, procurement challenges significantly impeded progress; the selected HL108 engine, rated at 300 horsepower, was intended to provide the necessary power for the increased mass, but negotiations with German suppliers through intermediaries like encountered repeated delays due to export restrictions and disruptions. The prototype's completion was targeted for March 1939, after which initial testing was scheduled to evaluate overall mobility on varied and integration of the armament system under field conditions. These trials were envisioned as critical to validating the tank's role, emphasizing speed, maneuverability, and firing accuracy, but the unresolved engine issue pushed back assembly and ultimately halted further development as geopolitical tensions escalated. Despite these setbacks, the prototyping effort demonstrated Polish armored engineering capabilities in adapting lighter designs to meet evolving requirements for a balanced 14-tonne .

Design

Chassis and suspension

The 14TP utilized a fully tracked , marking a departure from the convertible drive of its predecessor, the , to prioritize dedicated track performance for operations. This design emphasized a low-silhouette hull with sloped contours to enhance overall protection while maintaining a compact profile suitable for rapid maneuvers. The was engineered as a heavier, reinforced structure compared to the , accommodating the projected weight of 14-15 tonnes without compromising structural integrity. Measuring 5.4 meters in length, 2.5 meters in width, and 2.2 meters in height, the 14TP's dimensions reflected its role as a medium cruiser tank, balancing speed and stability on varied terrain. The hull adopted a traditional tracked layout with the turret centrally mounted atop the fighting compartment, allowing for efficient integration of the vehicle's core components. Internally, the layout supported a four-man : the driver positioned at the front left, a co-driver and machine gunner to the right, the in the turret alongside the main gunner, optimizing crew efficiency in a . The suspension system was a key innovation, employing a Christie-type mechanism with large road wheels and coil springs acting on pivoted arms to enable high-speed cross-country travel. Adapted and strengthened from the 10TP's setup, this system featured five road wheels per side, providing superior ride quality and shock absorption for the increased mass. Ground clearance stood at approximately 40 cm, contributing to the tank's low and ability to navigate obstacles while preserving its cruiser-oriented mobility profile.

Armament

The primary armament of the 14TP was a 37 mm wz. 37 anti-tank , mounted in a single turret and designed for effective engagement of enemy armored vehicles at typical combat ranges. This gun, a tank-adapted version of the standard Polish anti-tank weapon, emphasized the vehicle's role in and anti-tank operations. An optional upgrade to a 47 mm wz. 39 was considered to improve performance against more heavily protected targets, with a developed in 1939 but not integrated into the design before the project's cancellation. The tank was planned to carry ammunition for the main gun, stored primarily in the turret and hull to support prolonged combat without resupply. The main gun achieved a practical firing rate of 12 rounds per minute when operated by a trained crew. Complementing the main gun, the secondary armament included two 7.92 mm Ckm wz. 30 machine guns—one with the for during main gun engagements, and the second mounted in the front hull for the co-driver to provide close-range defense against . These water-cooled Browning-pattern machine guns were reliable for the era and aligned with standard Polish armored doctrine for support. The turret supported full 360-degree manual traverse, powered by geared mechanisms operated by the gunner or loader to allow flexible targeting in dynamic battlefield conditions. Basic optical sights were provided for the gunner, offering simple telescopic aiming for the main armament while relying on or periscopes for the secondary weapons, consistent with pre-war Polish tank designs. Crew roles integrated armament operation with vehicle control, with the gunner handling primary fire control under the commander's direction.

Armor and protection

The 14TP prototype featured armor constructed from welded rolled homogeneous steel plates, providing baseline protection without advanced features like spaced armor. The overall thickness ranged from 35 mm to 50 mm, prioritizing weight efficiency for mobility while offering resistance to contemporary anti-tank threats. Frontal protection was the most robust, with a unified sloped plate on the hull and turret armor reaching 50 mm to deflect projectiles and increase effective thickness. Sides and rear utilized 35 mm plating for balanced coverage against flanking fire. The roof and floor employed thinner armor, described as largely symbolic given the era's limited aerial and underbelly threats, to avoid excessive weight. This layout concentrated defenses on the frontal arc, aligning with the tank's intended role in breakthrough operations, while the internal crew compartment benefited from the reinforced hull structure derived from the 10TP's dimensions.

Powertrain and mobility

The 14TP tank was designed to incorporate a rear-mounted 12-cylinder HL108 petrol engine rated at 300 horsepower, with provisions for a potential upgrade to 400 horsepower to meet enhanced performance demands. Power was planned to be delivered through a semi-automatic gearbox, interfacing with the Christie suspension system to achieve a top road speed of 50 km/h. The system included a capacity of 130 liters, supporting an operational range of 210 km on roads and 130 km off-road under design specifications. This configuration yielded a of approximately 21.4 hp per , facilitating the agile mobility expected of a .

Fate

Destruction of the prototype

The German invasion of Poland on 1 September 1939 abruptly terminated all development work on the 14TP tank project. At the time of the invasion, the single prototype was approximately 60% complete, consisting primarily of a partial chassis and some components, and was housed in the workshops of the Państwowe Zakłady Inżynierii (PZInż) in Ursus, a district of . As German forces advanced rapidly toward , Polish engineers and workers at the PZInż facility likely destroyed the unfinished prototype to prevent its capture, either through deliberate or by abandoning it to bombing raids during of the capital. This action resulted in the total loss of the partial and associated components, with no intact remnants recoverable amid the chaos of the . Most design plans and specifications for the 14TP were also destroyed during the evacuation or occupation of the PZInż workshops, though a sketch titled "Polnische Kampfpanzer 39TP," later identified as a fake or document unrelated to the 14TP, was found in the archives of the German . It has no connection to the actual project and exerted no influence on subsequent German designs. No further assembly or reconstruction of the occurred after the fall of on 28 September 1939.

Post-war documentation and legacy

Due to the German invasion of Poland in , much of the original documentation on the 14TP was lost or destroyed, leaving only limited surviving records from Polish archives, including the Central Military Archives (CAW), and potentially some materials captured by German forces during the occupation. These fragmentary sources formed the basis for post-war historical analyses, with Polish armored vehicle expert Janusz Magnuski providing the earliest reference to the 14TP in his 1964 publication Wozy Bojowe 1914-1964, which drew on interwar design notes and specifications to outline the project's scope. Subsequent research expanded on these archives through detailed studies, such as the 2009 article by Janusz Magnuski and Andrzej Kiński in Poligon magazine, which synthesized available technical data to describe the 14TP as an assault tank of the prototype, emphasizing its intended role in Polish mechanized forces. Earlier post-war efforts, including Tomasz Koch's contribution in the 1997/1 issue of Militaria, referenced CAW holdings to verify basic parameters like weight and armament, though access to these documents remains restricted. The 14TP exerted no direct influence on wartime tank production, as the invasion halted all development, but its conceptual emphasis on Christie suspension systems for enhanced cross-country performance in light and medium tanks highlighted innovative Polish engineering priorities in the late 1930s. In contemporary contexts, the 14TP has seen renewed interest through historical simulations and modeling; it appears as a tier IV in the online game , where its historical Christie-based mobility is replicated for gameplay. Enthusiasts have produced scale models and 3D-printable reconstructions based on published plans from sources like Poligon, allowing for visual study of the unbuilt design.
Add your contribution
Related Hubs
User Avatar
No comments yet.