Recent from talks
Nothing was collected or created yet.
Blue force tracking
View on Wikipedia
Blue force tracking is a United States military term for a GPS-enabled capability that provides military commanders and forces with location information about friendly (and despite its name, also hostile) military forces. In NATO military symbology, blue typically denotes friendly forces. The capability provides a common picture of the location of friendly forces and therefore is referred to as the blue force tracker. When all capitalized, the term refers to a specific defense contractors' system, but the capability is found in many military and civilian mobile apps.
Systems
[edit]Blue force tracking (BFT) systems consist of a computer, used to display location information, a satellite terminal and satellite antenna, used to transmit location and other military data, a Global Positioning System receiver (to determine its own position), command-and-control software (to send and receive orders, and many other battlefield support functions), and mapping software, usually in the form of a geographic information system (GIS), that plots the BFT device on a map. The system displays the location of the host vehicle on the computer's terrain-map display, along with the locations of other platforms (friendly in blue, and enemy in red) in their respective locations. BFT can also be used to send and receive text and imagery messages, and has a mechanism for reporting the locations of enemy forces and other battlefield conditions (for example, the location of minefields, battlefield obstacles, bridges that are damaged, etc.).
Additional capability in some BFT devices is found in route planning tools. By inputting grid coordinates, the BFT becomes both the map and compass for mechanized units. With proximity warnings enabled, the vehicle crew is made aware as they approach critical or turn points.
Neil Siegel, then of TRW, is credited with leading the development of Force XXI Battle Command Brigade-and-Below (FBCB2), the first successful large-scale blue-force tracking system. This system was often called "the digital battlefield".[1]
Adoption
[edit]Users of BFT systems include the United States Army, the United States Marine Corps, the United States Air Force, the United States Navy ground-based expeditionary forces (e.g., United States Naval Special Warfare Command (NSWC) and Navy Expeditionary Combat Command (NECC) units), the United Kingdom, and German Soldier System IdZ-ES+.
In 2008, work began on plans to reach the level of nearly 160,000 tracking systems in the US Army within a few years; the system prime contractor is the Northrop Grumman corporation of Los Angeles, California.[2]
In November 2010,[3] the US Army and the US Marine Corps reached an agreement to standardize on a shared system, to be called "Joint Battle Command Platform", which will be derived from the Army's FBCB2 system that was used by the US Army, the US Marine Corps, and the British Army during heavy combat operations in the Iraq War in 2003.
An Army-specific Blue Force Tracking technology is Force XXI Battle Command Brigade and Below, or FBCB2. The system continually transmits locations over the FBCB2 network. It then monitors the location and progress of friendly (and enemy) forces, and sends those specific coordinates to a central location called the Army Tactical Operations Center. There the data are consolidated into a common operational picture, or COP, and sent to numerous destinations, such as the headquarters element, other in-theater forces, or back out to other military units for situational awareness. The system also allows users to input or update operational graphics (i.e. obstacles, engineer reconnaissance on the road, enemy forces). Once uploaded, it can either be sent to higher headquarters or "mailed" to other subscribers of that user's list, or other BFT users within the subscription system.[citation needed] The M1A1 Abrams's tank AIM refurbishment/upgrade program includes FBCB2 and Blue Force Tracking.[2]
The BFT system, and the FBCB2 system of which it is a variant, have won numerous awards and accolades, including: recognition in 2001 as one of the five best-managed software programs in the entire US Government,[4] the 2003 Institute for Defense and Government Advancement's award for most innovative US Government program,[5] the 2003 Federal Computer Week Monticello Award (given in recognition of an information system that has a direct, meaningful impact on human lives), and the Battlespace Information 2005 "Best Program in Support of Coalition Operations".[6]
See also
[edit]- Force XXI Battle Command Brigade and Below
- Program Executive Office Command Control and Communications Tactical
Civilian/commercial equivalents
[edit]References
[edit]- ^ "Dr. Neil G. Siegel".
- ^ a b General Dynamics Awarded $34 Million for M1A1 Abrams Tank Upgrades, General Dynamics Press Release, Sterling Heights, Michigan, September 5, 2008; available at generaldynamics.com
- ^ George I. Seffers (November 2010) Situational Awareness In Hand. SIGNAL Magazine
- ^ Crosstalk, the Journal of Defense Software Engineering, January 2002
- ^ Factiva, 1-23-2004
- ^ "StackPath".[permanent dead link]
External links
[edit]- 1st Lt. Fox, Stephen (2006-01-19). "JSTARS adds blue force tracking capability". Global Security.
{{cite web}}: CS1 maint: numeric names: authors list (link) - Shachtman, Noah (2006-06-01). "Winning-and Losing-the First Wired War". Popular Science. Archived from the original on 24 February 2012.
- "FBCB2 Program Manager, Fort Monmouth, NJ". PEO C3T. 2008-11-18. Archived from the original on 2008-12-05.
- The Blue Force Tracker System video by Smithsonian National Air and Space Museum
Blue force tracking
View on GrokipediaOverview and History
Definition and Purpose
Blue force tracking (BFT) is a GPS-enabled capability that provides military commanders and forces with real-time location information about friendly forces, enabling the process of fixing, observing, and reporting their positions and movements on digital maps or common operational pictures (COP).[10][11] This technology enhances situational awareness by displaying friendly unit locations, identities, and statuses, often integrated with command and control (C2) systems to support operational decision-making during missions.[12][13] The core purpose of BFT is to allow commanders to monitor troop movements, coordinate actions in dynamic environments, and maintain an accurate battlespace picture, particularly in joint or multinational operations where clear visibility of allied positions is critical.[11] By linking to broader C2 networks, it facilitates rapid communication of orders and adjustments, contributing to effective networked warfare where information sharing across platforms improves overall mission execution.[14][15] Key benefits include improved decision-making through timely positional data, enhanced coordination among units to avoid overlaps or gaps, and a significant reduction in friendly fire incidents—known as fratricide—by mitigating risks of misidentification in combat zones.[11][16] It also minimizes collateral damage by providing precise awareness of friendly assets relative to civilian or neutral areas, thereby supporting safer and more precise operations.[15] The term "blue force" originates from longstanding military exercise conventions using colored symbols in NATO symbology, where blue denotes friendly units to distinguish them from hostile (red) or neutral (green) forces.[11] This practice evolved from early GPS applications in the 1990s, adapting satellite navigation for tactical tracking.[10]Development Timeline
The development of blue force tracking (BFT) was spurred by the 1991 Gulf War, where inadequate visibility of friendly forces contributed to significant friendly fire incidents, resulting in 35 American deaths from fratricide—nearly one-quarter of all U.S. combat fatalities in the conflict.[17] This highlighted the need for real-time position tracking, leading the U.S. Department of Defense to invest in GPS-based solutions to mitigate such risks.[18] The first operational use of GPS in combat during the Gulf War further underscored its potential for force location, though systems at the time lacked integrated tracking capabilities.[19] In response, the U.S. Army initiated the Force XXI Battle Command Brigade and Below (FBCB2) program in May 1994 as part of the broader Force XXI transformation effort, which began conceptual planning in 1993 to digitize battlefield command and control.[20] This program laid the foundation for BFT by integrating GPS with digital mapping for friendly force visibility. Northrop Grumman (formerly TRW) received a low-rate initial production contract in January 2000 for FBCB2-BFT hardware, with initial fielding to Army units occurring in 2002 ahead of major deployments.[21] The system's combat debut came during the 2003 Iraq War (Operation Iraqi Freedom), where over 1,200 BFT units were rapidly installed on vehicles, command posts, and helicopters, providing critical situational awareness and reducing fratricide risks in dynamic environments.[22][23] Following these early deployments, BFT evolved through satellite communication enhancements in the post-2000s era. The original BFT-1 relied on Inmarsat's L-band satellites for beyond-line-of-sight connectivity, enabling global tracking but limited by narrowband constraints.[24] In the 2010s, the Army awarded ViaSat a contract in August 2010 to develop BFT-2, which introduced full-duplex transceivers, 10 times the bandwidth of BFT-1 (up to 120 kbps forward link), and enhanced communications security compliant with FIPS 140-2 standards.[25][26] Fielding of BFT-2 began in 2011 to brigade combat teams, improving data throughput for real-time updates and integration with joint systems.[27] By the 2020s, BFT modernization focused on next-generation capabilities for contested environments. In April 2019, the Army selected Hughes Network Systems for a Cooperative Research and Development Agreement (CRADA) to architect BFT-3, emphasizing resilient networks, reduced size/weight/power, and compatibility with low-Earth orbit satellites to support multi-domain operations.[28] Incremental fielding of BFT-3 is targeted for 2025, incorporating edge computing for faster processing and potential cloud integration to handle data fusion across domains. In November 2023, the Army solicited industry input on low-Earth orbit integration for the Mounted Mission Command-Transport program, a BFT successor aimed at enhanced situational awareness in joint all-domain command and control.[8] Recent contracts, such as ViaSat's $153 million award in September 2024 from the Defense Information Systems Agency, continue network upgrades, including engineering for hybrid cloud architectures to enable AI-assisted analytics for threat prediction and force optimization.[29][30]Technical Components
Core Technologies
Blue force tracking (BFT) relies on GPS receivers as the primary means for determining the precise positions of friendly forces. These receivers utilize signals from at least four satellites to calculate location data, including latitude, longitude, altitude, and timestamp, typically achieving an accuracy of 20 meters or better under standard conditions.[6] To enhance precision, especially in challenging terrains, military BFT systems incorporate differential GPS (DGPS), which uses ground-based reference stations to correct errors from atmospheric interference and satellite clock inaccuracies, enabling accuracies of 3 to 10 meters, depending on the specific augmentation technique.[6] In environments where GPS signals may be degraded but not fully denied, such as urban areas or under foliage, DGPS helps maintain reliable positioning for tactical operations.[6] Communication protocols form the backbone for transmitting position data in BFT systems, ensuring real-time or near-real-time sharing across distributed forces. Satellite links, particularly in the L-band frequency range (1-2 GHz), provide beyond-line-of-sight (BLOS) connectivity, leveraging constellations like Inmarsat for global coverage and low-data-rate transmission resistant to weather disruptions.[31][32] Tactical data links such as Link 16 enable secure, jam-resistant exchange of position location information (PLI) within line-of-sight or extended ranges, integrating BFT data into joint networks for interoperability among NATO and allied forces.[33] These protocols support on-the-move transmission, with data packets including pedigree information to verify source reliability.[2] Software elements in BFT process and visualize position data to create actionable situational awareness. Mapping interfaces, such as the Common Operational Picture (COP), aggregate PLI from multiple units onto digital maps, often integrated with systems like the Global Command and Control System (GCCS) for theater-level displays.[2] Algorithms handle position reporting at configurable intervals, typically every 1-5 minutes to balance accuracy, bandwidth usage, and device power conservation, with faster updates (e.g., 10-15 seconds) possible for self-location in high-threat scenarios.[6][34] These software components support cross-platform compatibility, including ruggedized laptops and mobile devices, and use geographic information system (GIS) tools for overlaying terrain and threat data.[35] Power and hardware fundamentals ensure BFT devices operate reliably in austere field conditions. Ruggedized units, compliant with military standards like MIL-STD-810 for shock, vibration, and environmental resistance, incorporate integrated antennas for GPS and satellite communications, often omnidirectional for omni coverage.[27] Battery life is typically 15-20 hours of continuous operation using lithium batteries, with power management features like adjustable reporting intervals to extend endurance during prolonged missions.[6] Encryption modules, such as Type 1 devices like the KGV-72, secure all data transmissions against interception, ensuring compliance with classified network requirements.[27]System Architecture
Blue force tracking systems utilize a hierarchical structure comprising end-user devices, such as vehicle-mounted transceivers, handheld GPS units, and aviation receivers, which collect location data and feed it upward to central servers or mission management centers via satellite or terrestrial networks. These central nodes aggregate and process the data before disseminating it to higher-level command centers, where it integrates into command and control (C2) systems like the Global Command and Control System (GCCS) for theater-wide oversight.[2][36][37] Data flow in these systems starts with the acquisition of position location information (PLI) from GPS receivers embedded in end-user devices, followed by encryption using standards validated under the U.S. Cryptographic Module Validation Program (CMVP), which supports algorithms like AES for secure handling. The encrypted PLI is then transmitted over IP-based military networks, tactical data links, or commercial satellite channels (e.g., L-band or Inmarsat), enabling near-real-time updates with latencies reduced to seconds in advanced variants. Upon receipt at central servers, the data is processed into a standardized format and visualized on geographic information system (GIS) dashboards or tactical displays, providing commanders with a common operational picture (COP) of friendly forces.[6][37][2] Scalability is achieved through open systems architectures capable of supporting up to 250,000 devices across operational theaters, with features like XML repositories and channel-sharing on satellite links ensuring low-latency refreshes (e.g., 10 times faster than legacy systems) and 99.95% availability. To maintain reliability, failover mechanisms include self-healing mesh networks for local redundancy, terrestrial communication backups when satellite links fail, and integration with beyond line-of-sight (BLOS) alternatives to counter GPS jamming.[2][37][6] Interoperability standards, including compliance with NATO Standardization Agreements (STANAG) such as STANAG 5516 for data exchange formats, enable seamless sharing of tracking information among allied forces. Systems also incorporate joint military protocols like MIL-STD-461 for hardware and XML-based integration with tactical networks, facilitating coalition operations without proprietary silos. Blue force tracking relies on core GPS and satellite technologies as foundational elements for accurate position determination.[38][39][37] Ongoing modernization efforts as of 2024 include the U.S. Army's award of a $153 million contract to Viasat for BFT network engineering and services, focusing on improved bandwidth efficiency, secure messaging, and adaptation to contested environments. These upgrades also explore integration with low-Earth orbit (LEO) satellite constellations for the next-generation Blue Force Tracker (BFT-3), expected to enhance global coverage, reduce latency, and support operations in GPS-denied scenarios.[7][40]Military Systems and Implementations
Key Military Systems
The United States Army's Blue Force Tracker (BFT) system represents a foundational implementation of blue force tracking technology, with BFT1 serving as the initial operational version deployed starting in late 2001 following the September 11 attacks. This deployment was accelerated for Special Operations Forces (SOF) in Afghanistan and Iraq, utilizing limited numbers of Grenadier 1 transmitters provided by Boeing to units under U.S. Army Special Operations Command (USASOC), enabling real-time location sharing via satellite links; integration with Force XXI Battle Command Brigade and Below (FBCB2) software was primarily for conventional Army units.[41] By the early 2000s, the system expanded to track over 1,200 units across ground vehicles and aviation platforms, providing commanders with GPS-based positional data to reduce friendly fire risks during dynamic operations.[2] BFT2, introduced as an upgrade beginning in 2011 and fully fielded by 2013 through the Joint Capabilities Release (JCR) increment, significantly enhanced performance over BFT1 by achieving approximately 10 times faster data transmission rates, reducing position updates from minutes to seconds via full-duplex satellite communications and ground station relays.[42] This upgrade incorporated improved encryption and compatibility with tablet-style computing devices, facilitating integration with mobile platforms like the Nett Warrior system for dismounted soldiers, though direct Android-specific adaptations emerged in later software updates for handheld interfaces.[42] Over 58,000 BFT2 transceivers were procured and deployed across Army and Marine Corps units by the mid-2010s, supporting beyond-line-of-sight tracking in contested environments.[42] The Joint Battle Command-Platform (JBC-P), fielded starting in 2015 as the direct successor to BFT and FBCB2, builds on these foundations with a modular architecture that emphasizes user-centric design and network convergence. JBC-P equips over 120,000 platforms across brigade combat teams, featuring detachable tablet-based interfaces with touch-enabled maps, drag-and-drop icons for tactical symbology, and scalable hardware via the Mounted Family of Computer Systems (MFoCS).[43] It integrates seamlessly with the Warfighter Information Network-Tactical (WIN-T) through a hybrid gateway for terrestrial and satellite connectivity, enabling shared situational awareness data across joint forces while reducing size, weight, and power requirements compared to legacy BFT hardware.[43] Internationally, the United Kingdom's BOWMAN tactical communications system incorporates blue force tracking elements through embedded GPS receivers in its digital radios, allowing real-time location data aggregation for both mounted and dismounted units since its initial fielding in 2004. Enhancements, including software upgrades activated by 2008, expanded personnel tracking via Personal Role Radios (PRR) integrated with the system's Combat Service Support (CSS) applications, supporting over 46,500 radios and tracking across 20,000 vehicles in operations like those in Kosovo, Afghanistan, and Iraq.[44][45] NATO's Allied Command Transformation (ACT) has pursued blue force tracking interoperability since 2015 under the Connected Forces Initiative (CFI), focusing on standardizing data exchange amid 13 disparate national systems to create a common operational picture during multinational exercises. ACT-led efforts, such as those through the Joint Multinational Training Command, emphasize hybrid solutions combining U.S. BFT technologies with low-tech aids like radio coordination, with implementations tested in NATO Response Force drills to enhance allied force visibility without full hardware convergence.[46] Key blue force tracking systems share satellite-based architectures for global coverage, typically leveraging Inmarsat or commercial geostationary satellites to provide line-of-sight and beyond ranges exceeding 10,000 kilometers, though effective user capacities vary by network load—BFT2/JBC-P supports up to 100,000 concurrent users with data rates of 2-10 Kbps per terminal. Modernization efforts as of 2025 include the Viasat engineering contract awarded in 2024 for BFT2 network enhancements to improve capacity and reliability, extending through 2029, and the Comtech MT-2025 transceiver model, fielded since 2018, supporting higher throughput up to 128 Kbps in high-density scenarios.[47][48]| System | Coverage Range | User Capacity | Key 2025 Upgrade Path |
|---|---|---|---|
| BFT1/BFT2 (US Army) | Global (satellite) | Up to 58,000 transceivers | Continued network enhancements under 2024 Viasat engineering contract for improved capacity and reliability[29] |
| JBC-P (US Joint) | Global/hybrid | Over 120,000 platforms | MFoCS integration with AI analytics and reduced SWaP[43] |
| BOWMAN (UK) | Regional/global via extensions | 46,500+ radios | Morpheus successor for enhanced data sharing[44] |
| NATO ACT Implementations | Multinational (interoperable) | Varies by exercise (10,000+ forces) | CFI standardization for big data fusion[46] |