Hubbry Logo
Colt New Police RevolverColt New Police RevolverMain
Open search
Colt New Police Revolver
Community hub
Colt New Police Revolver
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Colt New Police Revolver
Colt New Police Revolver
Colt New Police Revolver
View on Wikipedia
from Wikipedia

The Colt New Police was a double-action, six-shot revolver (which can also be fired single action). This gun was chambered in the .32 New Police, which is very similar to the .32 S&W Long.[1] In addition to the .32 New Police cartridge, the revolver was available in 32 Colt.

Key Information

The Colt New Police was manufactured from 1896 to 1907 by Colt's Manufacturing Company of Hartford, Connecticut. The sights on the revolver were fixed with a round blade in front and a grooved rear sight. The revolver was available with a 2+1⁄2-inch, four-inch, or six-inch barrel in a blued or nickel finish and hard rubber grips. The Colt New Police was selected by New York City (NYPD) Police Commissioner Theodore Roosevelt in 1896 to be the first standard-issue revolver for NYPD officers.[2][3]

A target version was made until 1905 with a 6-inch barrel and adjustable sights.[4]

The New Police Revolver was replaced in the Colt catalog in 1907 by the improved Colt Police Positive, which featured an internal hammer block safety and better lock work.[5]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Colt New Police Revolver

View on Grokipedia
from Grokipedia
The Colt New Police Revolver is a double-action revolver with a swing-out cylinder, introduced by Colt's Manufacturing Company in 1896 and produced until 1907. It was chambered primarily in the .32 Colt New Police cartridge (also known as .32 S&W Long), with a six-round capacity and fixed sights consisting of a round front blade and a rear groove. The design derived from Colt's earlier New Pocket Revolver frame of 1893, marking an early advancement in modern swing-out cylinder mechanisms for law enforcement use. In 1896, New York Police Department Commissioner selected the Colt New Police as the first standardized sidearm for the NYPD force, a pivotal moment in American policing history that underscored its reliability and suitability for urban duty. Available in barrel lengths of 2.5, 4, or 6 inches, the revolver featured checkered hard rubber grips and was offered in blue or nickel finishes, with approximately 50,000 units produced. It served as a direct predecessor to the model introduced in 1907, which incorporated an improved positive lock safety mechanism while retaining the core frame and design. The New Police's adoption highlighted Colt's growing dominance in supplying firearms to police departments, influencing subsequent double-action revolver developments through the early 20th century.

History

Development and Introduction

In the mid-1890s, accelerated its development of advanced double-action revolvers equipped with swing-out cylinders, seeking to offer law enforcement and civilians quicker reloading capabilities compared to fixed-cylinder designs. This initiative directly built upon the Model 1889 Navy revolver, Colt's pioneering double-action model that introduced the swing-out cylinder for simultaneous cartridge extraction and insertion. The Colt New Police Revolver emerged in as a refined, compact iteration tailored to the rising demand for dependable, concealable sidearms among police forces. Designed for urban patrol duties, it featured a robust yet lightweight frame that balanced portability with stopping power, addressing limitations in earlier Colt pocket models. Central to its mechanical reliability was the influence of William Mason, Colt's esteemed engineer and inventor, whose patent for a swing-out cylinder with positive locking and ejection mechanism formed the basis for the New Police's efficient action. Mason's prior innovations, including double-action advancements in the 1877 Lightning revolver, contributed to the positive lock system that ensured secure cylinder alignment and prevented misfires during rapid use. Colt marketed the revolver distinctly as the "New Police" to highlight its evolution beyond predecessors like the 1877 Lightning, positioning it as a modern professional tool rather than a mere pocket defender. It debuted in Colt's 1896 catalogs, promoted for its wrought-iron frame and case-hardened components, underscoring the company's commitment to durability in law enforcement applications. The model's introduction coincided with its swift endorsement by New York Police Commissioner , who adopted it as the department's inaugural standard-issue sidearm.

Adoption and Early Use

In 1896, New York Police Department Commissioner selected the Colt New Police Revolver chambered in .32 Colt as the department's first standardized sidearm, marking a significant reform in police armament. Roosevelt authorized the procurement of 4,500 units to equip officers uniformly, replacing the varied personal firearms previously carried by patrolmen. The adoption was driven by the revolver's compact design, which facilitated in urban environments, its reliable double-action mechanism for quick deployment, and the .32 caliber's mild , which enhanced officer accuracy and control during close-quarters policing. Roosevelt personally tested the firearm and praised its balance and handling, leading to the implementation of mandatory marksmanship programs that emphasized its ease of use and precision at typical engagement distances. Roosevelt initiated these training programs due to the generally poor proficiency of officers at the time. Parallel to its role, the Colt New Police Revolver entered the civilian market through Colt's catalogs, promoted as a lightweight option. The model's early operational history included routine deployments by NYPD officers in arrests and patrols across from 1897 onward, supporting Roosevelt's broader efforts to professionalize the force.

Design and Features

Mechanical Design

The Colt New Police Revolver employed a double-action/single-action trigger mechanism, enabling the user to cock and fire the via a single trigger pull in double-action mode or manually cock the hammer for single-action operation, providing versatility for rapid deployment or precise aiming. Central to its operation was the swing-out design, mounted on a crane that allowed the to pivot to the left for loading and unloading, facilitated by a star extractor that simultaneously withdrew all six spent cases upon activation of the ejector rod. The revolver's small-frame , a compact solid-frame forged from a single piece of high-quality , contributed to its lightweight yet durable build, weighing approximately 18 ounces unloaded and measuring about 8 inches in overall length for the 4-inch barrel model. Safety features included a half-cock notch on the , intended for secure carry with the cylinder indexed but the hammer uncocked, and a robust cylinder lock-up system utilizing a bolt that engaged recesses in the to prevent when the hammer was at rest or fully cocked. Compared to predecessors like the , which relied on more fragile leaf springs prone to breakage and less refined timing, the New Police's lockwork demonstrated improved smoothness through refined machining and a double-pawl mechanism for freer cylinder , reducing friction and enhancing operational reliability.

Specifications and Cartridges

The Colt New Police Revolver was produced with standard barrel lengths of 2.5 inches, 4 inches, and 6 inches, allowing for variations in overall length and weight depending on the configuration; for example, the 4-inch barrel model measured approximately 8 inches overall and weighed about 18 ounces unloaded. The featured a six-round capacity and a rifled barrel with six grooves and a right-hand twist rate of 1:16. Available finishes included blued steel or nickel-plating, paired with hard rubber grips featuring a Colt medallion for improved handling and aesthetics.
SpecificationDetails
Barrel Lengths2.5 in, 4 in, 6 in
Overall Length (4 in barrel)~8 in
Weight (unloaded, 4 in barrel)~18 oz
Cylinder Capacity6 rounds
Rifling6 grooves, 1:16 right-hand twist
FinishesBlued steel, nickel-plated
GripsHard rubber with Colt medallion
The primary cartridge was the .32 Colt New Police, essentially identical to the , typically loaded with a 98-grain lead round-nose achieving muzzle velocities of 800-900 feet per second from a 4-inch barrel, providing moderate for close-range defensive use. Alternative chamberings included the .22 Long Rifle for target shooting and the .38 Colt New Police for increased power, with ammunition loaded via a swing-out that allowed simultaneous ejection of spent cases and insertion of fresh rounds using a star ejector.

Variants

Standard Production Models

The Colt New Police Revolver was produced in base configurations optimized for different roles, featuring barrel lengths of 2½ inches for applications, 4 inches for standard police duty, and 6 inches for general-purpose use. These variants shared a consistent double-action mechanism with a swing-out and fixed sights, emphasizing reliability for needs. Finish options included blued steel for the majority of production and nickel plating for a smaller proportion, providing choices for durability and aesthetics in professional settings. Standard grips consisted of checkered hard rubber panels with the Colt logo molded in, offering a secure hold; optional mother-of-pearl or wood grips were available through special orders for customized preferences. Throughout its manufacturing period from 1896 to 1907, the standard models underwent subtle refinements to enhance performance, maintaining the core design while addressing minor mechanical aspects for improved functionality. Standard production revolvers were typically shipped in basic wooden boxes, differing from special order variants that might include fitted cases.

Target and Special Variants

The Target model of the Colt New Police Revolver, introduced in 1896, featured a 6-inch barrel, adjustable sights, and a flat-top frame optimized for competitive shooting and precision target practice. Approximately 5,000 Target models were produced from 1896 to 1905. This variant retained the core double-action mechanism of the but incorporated enhancements like a nickel-plated finish with blued and trigger for improved visibility and durability during extended range sessions. The adjustable rear sight allowed for fine-tuned elevation and windage adjustments, making it suitable for marksmen seeking greater accuracy over the fixed sights of production models. Special orders of the New Police Revolver included custom-engraved frames and -gripped handles, often produced for dignitaries or as pieces to honor distinguished service. These variants featured intricate factory patterns and serialized stocks, elevating their aesthetic and ceremonial value beyond standard issue firearms. Notable examples include those inscribed for the New York Police Department, such as revolvers marked "NEW YORK POLICE" on the frame, which served as official commendation items for officers. The Target model was discontinued in 1905, supplanted by the introduction of the , which incorporated further refinements in safety and design for broader market appeal.

Production and Identification

Manufacturing Period and Output

The Colt New Police Revolver was manufactured from 1896 to 1907 at Colt's Patent Fire-Arms Manufacturing Company factory in . Production involved drop-forged steel frames and meticulous hand-fitting of the lockwork to ensure reliable double-action operation, reflecting the era's emphasis on craftsmanship in assembly. Total production across all variants reached approximately 49,500 units, with serial numbers ranging from 1 to 49,500. Output varied annually, starting with a small number in 1896 for initial shipments including to the New York Police Department, then around 4,200 units in 1897 and peaking later, with over 12,000 produced in 1907 alone as demand from law enforcement grew. Significant orders, including a 1897 contract for 4,500 revolvers to the New York Police Department under Commissioner , bolstered early production. Manufacturing ceased in 1907 with the introduction of the improved , which featured an enhanced positive lock mechanism and continued the serial number sequence starting at 49,500.

Markings and Serial Numbers

The Colt New Police Revolver features serial numbers ranging from 1 to 49,500, produced between 1896 and 1907, with these numbers stamped on the bottom of the frame (visible when the is removed), under the barrel (in front of the ), and on the rear face of the . Serial numbers were assigned sequentially across calibers (.32 and .38 New Police), aiding in dating the , as lower numbers (e.g., 1–4,199) correspond to 1897 production while higher ones (e.g., around 49,500) align with the final years before transition to the Police Positive model. Standard markings on authentic examples include "COLT'S NEW POLICE" stamped on the left side of the barrel above the cutout, serving as the model's primary designation. The top strap of the barrel typically bears the two-line address "COLT'S PT. F.A. MFG. CO. / [HARTFORD CT.](/page/The_Hartford /page/CT) U.S.A." followed by patent dates "," which reference key innovations in the double-action mechanism by William Mason and Carl J.M. Liebenberg. On the left side of the frame, a circular encloses the rampant emblem with "COLT'S NEW POLICE" arched around it. Inspector and proof marks provide further authentication, including sub-inspector initials (e.g., "A" or "B") stamped on the frame and barrel, as well as eagle-head cartouches from Colt's Hartford factory denoting final inspection and proof testing. These eagle stamps, often small and located near the serial number on the frame, confirm factory quality control. Markings varied slightly by production year; early examples (pre-1900) often lacked explicit caliber designations on the barrel, while post-1900 revolvers added ".32 NEW POLICE CTG." or ".38 NEW POLICE CTG." to the left side for clarity, reflecting evolving regulatory and market needs. To spot potential forgeries, collectors should verify matching serial numbers across all major components and correct patent date sequences—deviations, such as missing the 1889 date or anachronistic additions like 1905 patents (from later models), indicate alterations. Mismatched fonts, shallow stamping, or non-factory eagle marks are additional red flags for inauthentic pieces.

Users and Operational History

Primary Law Enforcement Adoption

The Colt New Police Revolver saw extended service with the New York Police Department (NYPD) from its initial adoption in 1896 through the 1920s, serving as a cornerstone of the department's armament during a period of urban growth and increasing criminal activity. Under Commissioner Theodore Roosevelt, approximately 4,500 units were ordered and issued to officers by the late 1890s, primarily chambered in .32 Colt New Police, providing a uniform sidearm that standardized equipment across the force. This issuance marked a significant expansion from the initial rollout, equipping patrolmen and detectives for daily duties in New York City's challenging environments. Roosevelt, dismayed by the poor marksmanship among officers who previously carried varied personal firearms, instituted rigorous training protocols emphasizing proficiency with the New Police Revolver. These programs required regular practice at department ranges, transforming the NYPD into one of the first modern police forces with mandatory firearms instruction and improving overall readiness. The revolver's design facilitated this training, allowing for quick reloading via its swing-out , which was particularly valued in high-pressure urban scenarios. Throughout the early 1900s, the New Police played a key role in NYPD efforts to suppress crime in New York City, including vice raids and gang confrontations amid rising immigration and labor unrest. Officers relied on its reliability during extended patrols, with the solid-frame construction proving durable in the city's variable weather conditions, including harsh winters. While the department began transitioning to the improved Colt Police Positive in 1907—featuring an internal hammer-block safety—many New Police revolvers remained in reserve and secondary use into the 1920s, bridging the gap to larger-caliber .38 Special models like the Colt Army Special approved in 1926. Beyond New York, the New Police saw limited adoption by other major U.S. police departments, such as the , where marked examples indicate issuance to officers in the early 20th century for patrol and work. These deployments highlighted the revolver's appeal as a compact, dependable option for urban nationwide.

Civilian and Other Military Use

The Colt New Police Revolver gained substantial popularity among civilians for personal , particularly in urban settings where its compact size and double-action mechanism allowed for and rapid response. Chambered primarily in .32 Colt New Police (equivalent to ), it appealed to merchants, travelers, and city dwellers seeking a reliable backup during the late and early . Sales of the New Police reflected its broad civilian appeal, with Colt producing the model from 1896 to 1907 before transitioning to the improved Police Positive variant; the combined D-frame revolver line ultimately exceeded 750,000 units over its extended run, underscoring the enduring demand in the private market during the initial production years. The .32 variant proved suitable for target shooting, offering low recoil and accuracy with wadcutter loads, while both .32 and later .22 adaptations in successor models supported small game hunting and plinking among civilian shooters. By the 1910s, civilian preference for the New Police waned as semi-automatic pistols, such as Colt's Pocket Hammerless models, offered higher capacity and faster reloading, shifting market trends away from traditional revolvers.

Legacy and Collectibility

Successors and Influence

The Colt New Police Revolver directly influenced subsequent designs within Colt's lineup, most notably serving as the foundation for the 1907 Police Positive, which incorporated an internal positive lock mechanism to enhance safety by preventing accidental discharge when the hammer was down with all chambers loaded. This improvement addressed limitations in the New Police's lockwork, allowing for safer carry configurations that became a hallmark of modern double-action revolvers, while retaining the compact small-frame design suited for urban policing. The New Police's design elements extended to larger-frame successors, including the 1908 Army Special—later rebranded as the Official Police in 1927—which adopted similar double-action lockwork and frame principles for improved durability and reliability under repeated use. These evolutions built on the New Police's swing-out , first pioneered by Colt in 1889 but refined and popularized through the 1896 model, establishing it as the for double-action revolvers by enabling rapid reloading essential for scenarios. In , the New Police contributed to emerging standards by favoring compact calibers like the .32 New Police, which offered manageable recoil and concealability for patrol duties, influencing preferences for lighter, officer-friendly sidearms over heavier military calibers. Its adoption under New York Police Commissioner in 1896 marked the first large-scale standardization of a department-issued , aligning with his broader reforms that professionalized American policing through merit-based hiring, rigorous training, and to combat and inefficiency.

Modern Value and Preservation

In the contemporary collector's market, standard blued Colt New Police Revolvers in good condition typically command values between $400 and $800, based on recent data and valuation trends as of 2025. For rarer variants, such as those marked for the New York Police Department (NYPD) or target models, prices can exceed $2,000, with a factory-engraved NYPD example selling for $2,675 at in 2024. These values reflect the revolver's and , with approximately 50,000 units produced between 1896 and 1907, though many have seen heavy use. The pricing of Colt New Police Revolvers is heavily influenced by condition factors, including the originality of hard rubber grips, the integrity of the blued or finish, and the mechanical soundness of components like and cylinder lockup. Collectors prioritize unrestored examples with matching serial numbers and minimal alterations, as refinishing can diminish authenticity and reduce value by up to 50%. Preservation presents specific challenges, particularly for -plated models, where the finish often develops pitting, peeling, or freckling due to age and exposure, requiring careful stripping and replating by specialists to avoid mismatched appearances. Cylinder timing issues, such as bolt retraction delays or hand misalignment, are also common in surviving examples from prolonged service, necessitating intervention to restore safe functionality without compromising historical integrity. Modern reproductions are limited, as Colt ceased production over a century ago, but parts availability supports restoration efforts through suppliers like Sarco Inc. and the Colt Collectors Association, which facilitates trading of original components such as hammers, cranes, and grips via member networks and annual shows. The association's resources, including technical bulletins, aid in maintaining these antiques. Culturally, the Colt New Police Revolver appears in depictions of early , notably in biographies of , who selected it as the NYPD's first standard-issue sidearm in 1896 and carried a personal example during his tenure as . It also features in early 20th-century media portrayals of urban policing, such as period films and literature evoking the Gilded Age's reform era.

References

  1. https://www.americanrifleman.org/content/the-colt-police-positive-a-look-back/
  2. https://www.breachbangclear.com/the-colt-new-police-revolver/
  3. https://www.coltfever.com/new-police/
  4. http://www.coltautos.com/DA/NewPocket/newpocketpd.htm
  5. https://www.colt.com/timeline/
  6. https://www.turnbullrestoration.com/gun/colt-new-police-revolver/
  7. https://www.americanrifleman.org/content/a-little-piece-of-history-my-1924-colt-police-positive/
  8. http://www.coltautos.com/DA/NewPolice/newpolicepd.htm
  9. https://www.spanamwar.com/Colt1889series.htm
  10. https://americansocietyofarmscollectors.org/wp-content/uploads/2022/04/1986-B55-Colt-s-Efforts-at-Double-Action.pdf
  11. https://www.guns.com/news/2017/12/01/nypd-moves-to-ditch-last-revolvers-after-121-official-year-run-photos
  12. https://inside.safariland.com/blog/nypd-and-a-history-of-service-pistols/
  13. https://www.shootingillustrated.com/content/the-evolution-of-law-enforcement-revolver-training/
  14. https://thetacticalprofessor.net/2025/09/03/the-evolution-of-police-revolver-training/
  15. https://inside.safariland.com/blog/american-police-pistols-of-the-19th-century/
  16. https://www.shootingtimes.com/editorial/handgun_reviews_st_coltnewservice_200905/100072
  17. https://www.gunsinternational.com/guns-for-sale-online/revolvers/colt-revolvers---police-positive/colt-new-police--32---police-positive---da-sa-revolver----32-long-colt.cfm?gun_id=101514479
  18. https://americanhandgunner.com/discover/handloading/the-32-sw-long-32-colt-new-police/
  19. https://chuckhawks.com/32long.htm
  20. https://www.coltforum.com/threads/colt-police-positive-target-22-lr.33197/
  21. https://www.rockislandauction.com/riac-blog/cop-and-thug-revolver
  22. https://coltfever.com/new-police/
  23. https://royalarmouries.org/collection/object/object-16047
  24. https://www.coltforum.com/threads/colt-police-positive-38-transitional-model.20854/
  25. https://www.coltforum.com/threads/colt-new-police-32-special-order-factory-engraved-inscribe.412157/
  26. https://antiquearmsinc.com/colt-new-police-factory-inscribed.htm
  27. https://www.rockislandauction.com/detail/41/3555/colt-new-police-revolver-32-new-police
  28. https://joesalter.ca/products/colt-new-police-32-cal-revolver
  29. https://www.coltforum.com/threads/what-parts-were-hand-fit.385692/
  30. https://www.iwm.org.uk/collections/item/object/30032995
  31. https://www.gunsinternational.com/guns-for-sale-online/revolvers/colt-revolvers---double-action-pre-war/colt-new-police-2-1-2--revolver-in--32-police-cartridge---shipped-to-the-president-of-colt-in-1901.cfm?gun_id=102114279
  32. http://coltautos.com/DA/newpolice/newpoliceci_802.htm
  33. http://www.coltautos.com/DA/newpolice/newpoliceci_463.htm
  34. http://www.coltautos.com/DA/PolicePositive/policepositivepd.htm
  35. https://www.gunboards.com/threads/colt-new-police-32-cal.288842/
  36. http://www.coltautos.com/DA/NewPolice/newpoliceci_40539.htm
  37. https://www.iwm.org.uk/collections/item/object/30032992
  38. https://www.gunsandammo.com/editorial/duty-handgun-history/394940
  39. https://www.antiquearmsinc.com/colt-new-police-inscribed-new-york-police.htm
  40. https://www.gunsinternational.com/guns-for-sale-online/revolvers/colt-revolvers---double-action-pre-war/colt-new-police.cfm?gun_id=101851030
  41. https://www.ancestryguns.com/chicago-police-department-marked-colt-new-police-revolver-3-14-crantique002-2/
  42. https://www.americanrifleman.org/content/i-have-this-old-gun-colt-army-special-a-k-a-official-police/
  43. https://gunsmagazine.com/wheelgun-wednesday/the-colt-official-police/
  44. https://lsbauctions.com/new-york-police-engraved-colt-new-police-4-32-da-revolver-1896-antique/
  45. https://www.coltforum.com/threads/colt-revolver-timing-checks.1297/
  46. https://www.rugerforum.net/threads/nickel-plated-revolvers-and-turn-lines.395702/
  47. https://www.sarcoinc.com/pistol-parts/colt/colt-police-positive/
  48. https://coltcollectors.com/
  49. https://www.coltforum.com/threads/teddy-roosevelt-and-the-new-police-revolvers.69071/
Add your contribution
Related Hubs
User Avatar
No comments yet.