Hubbry Logo
Colt M1889Colt M1889Main
Open search
Colt M1889
Community hub
Colt M1889
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Colt M1889
Colt M1889
Colt M1889
View on Wikipedia
from Wikipedia

The Colt Model 1889 was a revolver produced by the Colt Manufacturing Company in the late 19th to the early 20th century.

Key Information

History

[edit]

In the mid 19th century, Colt manufactured revolvers for the Army and Navy that were based on a design by William Mason and Carl J. Ehbets. William Mason left Colt in 1882 to work for Winchester, but Ehbets remained at Colt, and continued to refine the design that they had collaborated on. These refinements led to the Model 1889.[1]

Colt was the first manufacturer to produce a revolver with a swing-out cylinder. Smith & Wesson followed seven years later with the Hand Ejector, Model 1896 in .32 S&W Long caliber. This was an improvement over the Colt 1889 design since it used a combined center-pin and ejector rod to lock the cylinder in position. The 1889 did not use a center pin and the cylinder was prone to move out of alignment.[1]

Design features

[edit]

The Colt Model 1889 was the first double-action revolver with a swing-out cylinder, released by a sliding latch. This design had two advantages over previous designs as it enabled fast loading but also maintained the strength of a solid frame. The Model 1889 was chambered for the .41 Long Colt and .38 Long Colt cartridges.[1]

The Navy version was blued, and had a six-inch barrel. It was manufactured with hard rubber grips. Civilian versions had either a blue or nickel finish, and had walnut grips. Sometimes it can have ivory grips.[2]

The Model 1889 differed from earlier Colt revolvers in that its cylinder rotated counterclockwise instead of clockwise. This seems to have originated with U.S. Navy requirements; however, the direction of rotation worked against the cylinder lock and tended to force the cylinder out of alignment with the barrel. This weakness allowed the cylinder to rotate while holstered or even while the shooter was pulling the trigger.[2]

Use

[edit]

The Model 1889 and variants were adopted by the United States Military and used prior to the introduction of the M1911 pistol. The Model 1889 was also sold commercially as the Colt New Army and Navy. Approximately 31,000 Colt Model 1889 revolvers were produced.[2]

See also

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Colt M1889

View on Grokipedia
from Grokipedia
The Colt Model 1889, commonly known as the New Navy Revolver, was a double-action primarily chambered in caliber, with commercial variants in , introduced by in 1889 as the first of its designs to incorporate a swing-out for efficient reloading. This six-shot featured a 6-inch barrel, an overall length of 11.5 inches, a weight of approximately 2.1 pounds, and left-hand with five grooves to stabilize the cartridge, which propelled a 150-grain bullet at around 800 feet per second. Adopted by the shortly after its release—with an initial order of 5,000 units—it marked a significant advancement in American military sidearms, replacing earlier single-action designs like the converted Colt 1851 . The Model 1889's design emphasized reliability for naval service, with a blued , hard rubber grips, and a positive-lock mechanism, though early versions suffered from timing issues that were addressed in subsequent improvements. It quickly gained favor with both the and , leading to further contracts and evolutions into models like the M1892 (with enhanced locking) and M1895 (with refined trigger and safety features). Approximately 31,000 units of the original M1889 were produced between 1889 and 1894, with total series production exceeding 160,000 across variants by the early 1900s. During its service life, the revolver proved durable in harsh maritime environments but was criticized for the .38 Long Colt's relatively modest stopping power, prompting later shifts toward more potent calibers. It saw combat in key late-19th and early-20th-century conflicts, including the Spanish-American War of 1898—where it equipped sailors and Marines during operations like the Battle of Guantánamo Bay—the Philippine-American War (1899–1902), the Boxer Rebellion (1900), and even limited use in World War I. Notably, it was carried by prominent figures such as Theodore Roosevelt during the charge up Kettle Hill in Cuba. Production ceased around 1908 as it was supplanted by semi-automatic pistols like the Colt M1911, but the M1889's swing-out cylinder innovation influenced generations of modern revolvers.

Development

Historical Context

In the late 19th century, the military sought to modernize its sidearms amid advancements in technology and shifting tactical needs. The revolver, adopted in 1873 as the standard U.S. Army , exemplified the era's single-action, black powder designs, requiring manual cocking of the hammer for each shot and individual cartridge loading through a side gate. By the , the limitations of these black powder revolvers—such as slower firing rates and from residue—prompted a transition toward double-action mechanisms capable of supporting emerging smokeless powders, though full adoption of smokeless cartridges for U.S. pistols occurred gradually into the . This evolution reflected broader efforts to equip forces with more reliable and rapid-fire handguns suitable for extended engagements. International arms developments exerted pressure on American designers during this period. European powers, including Britain, accelerated their own innovations to maintain military superiority, with the Webley Mk I top-break adopted by the in 1887 for its quicker reloading compared to traditional gate-loaded models. Such advancements fueled a global , influencing U.S. manufacturers to prioritize similar improvements in speed and efficiency to avoid technological lag, particularly as colonial expansions heightened the demand for versatile . The U.S. Navy's requirements in the post-1880s era underscored the urgency for faster-reloading pistols, driven by rapid naval expansion and growing colonial interests in the Pacific and . Entering the decade with an obsolete fleet of mostly wooden vessels, the underwent modernization under acts of in and , commissioning steel-hulled cruisers and battleships that required compact, dependable sidearms for boarding actions and shipboard defense. Officials emphasized designs enabling swift ejection and reloading to suit close-quarters combat, leading to evaluations that favored double-action revolvers over single-action predecessors. Colt's early 1880s experiments addressed these demands but revealed the shortcomings of existing loading mechanisms. Building on the firm's 1877 double-action Model 1877 revolver, which retained a traditional side-loading gate, Colt engineers tested refinements to enable faster chamber access without fully redesigning the frame. However, the gate system proved inadequate in simulations, as it necessitated loading cartridges one by one, hindering reload times in high-pressure scenarios and prompting further innovation toward more efficient alternatives. These efforts, led by designers William Mason and Carl J. Ehbets, laid the groundwork for meeting military specifications.

Design and Innovation

The Colt M1889 revolver's swing-out cylinder mechanism was the result of collaborative prototyping efforts by Colt's chief engineer William Mason and designer Carl J. Ehbets, marking the company's first implementation of this feature in a double-action handgun. Conceptual development of the design occurred in the late 1880s, with Ehbets filing the pivotal U.S. patent for the mechanism on August 27, 1888, followed by initial production commencing in 1889. A core innovation was the sliding side-latch positioned on the left frame, which released the mounted on a pivoting crane, allowing it to swing outward for simultaneous ejection of spent casings via an extractor rod and rapid reloading—advantages that surpassed the slower processes of contemporary top-break revolvers or loading-gate models. Early prototypes encountered challenges with timing in double-action mode, where counterclockwise rotation could lead to misalignment under ; while adjustments improved reliability during testing, these flaws carried over into early production units.

Design and Features

Mechanical Components

The Colt M1889 featured a double-action trigger mechanism, enabling the user to cock the , rotate the , and fire a round through a single long pull of the trigger without manually cocking the , a significant advancement for rapid follow-up shots in combat scenarios. This mechanism relied on interconnected internal components to ensure smooth operation, with the trigger bar linking to the and advancement pawl for sequential actions during the pull. Central to the M1889's design was its innovative swing-out , the first such implementation in a Colt double-action , which pivoted to the left upon release of a spring-powered sliding latch on the frame's left side, allowing access to all six chambers simultaneously. A star-shaped extractor, integral to the assembly, facilitated the ejection of spent cartridges or loading of fresh ones in one motion by pushing them rearward when the was swung out and the extractor rod depressed, markedly speeding up reload times compared to earlier designs. Unlike most contemporary revolvers that rotated , the M1889's turned counterclockwise during firing, a choice stemming from Colt's adaptation of existing tooling but which contributed to long-term reliability issues, as wear on the notches and frame could cause occasional misalignment between chambers and the barrel, potentially leading to failures to fire or accuracy degradation. The internal lockwork of the M1889 represented a departure from Colt's prior gate-loaded double-action models, such as the 1877 Lightning, by incorporating a much-modified version of the Schmidt-Galand mechanism to accommodate the swing-out while maintaining double-action functionality. Key elements included a V-spring that provided tension to the via Galand's auxiliary lever system, simplifying the power delivery and reducing the number of separate springs compared to earlier complex DA lockworks; the hand, or pawl, was actuated by the trigger to incrementally advance the ratchet during the pull, ensuring precise chamber alignment before release. This configuration, while innovative, inherited some fragility from the adapted design, making field repairs challenging due to the tightly integrated components.

Specifications and Calibers

The Colt M1889 featured a 6-inch barrel and an overall length of 11.5 inches, classifying it as a medium-frame double-action designed for . Unloaded, it weighed approximately 2.07 pounds (0.94 kg), providing a balance of portability and stability for naval and use. The frame was constructed from blued to resist corrosion in maritime environments, paired with hard rubber grips for models to ensure a secure hold without slippage. variants occasionally featured or finishes, but the standard configuration prioritized durability with the blued and rubber elements. The held six rounds in its swing-out , allowing efficient reloading via a side mechanism. Primarily chambered in , the M1889 was adopted as the standard cartridge for U.S. and contracts, delivering a of approximately 785 feet per second (fps) with a 148-grain for effective short-range performance. Limited early production included the caliber, intended for higher but phased out in favor of the .38 due to logistical preferences; this variant maintained similar scaled to its larger projectile. Safety provisions were basic for the era, relying on a half-cock notch on the to secure the during loading and prevent accidental discharge, though it lacked a modern transfer bar or positive lock mechanism.
SpecificationDetail
Barrel Length6 inches (152 mm)
Overall Length11.5 inches (292 mm)
Weight (Unloaded)2.07 pounds (0.94 kg)
Capacity6 rounds
Frame MaterialBlued steel
Grips (Military)Hard rubber
Primary Caliber (muzzle velocity ~785 fps)
Alternate Caliber (limited production)

Production

Manufacturing Details

The Colt M1889 was manufactured exclusively at the Colt Patent Fire Arms Company's factory in , where the company employed early mass-production techniques, including the use of semi-interchangeable parts to facilitate assembly-line efficiency. This approach built on Colt's longstanding innovations in standardized , allowing for scalable output of the solid-frame, swing-out cylinder design. Production of the core M1889 model spanned from 1889 to 1894, with serial numbers beginning at 1 and extending through approximately 31,000 units, encompassing both military and commercial examples. Of these, around 5,000 were produced under a U.S. contract, with deliveries commencing in late 1889 and continuing into 1890, though some sources note adjustments extending into 1892 for fulfillment. Commercial production followed, peaking in the early as demand grew for the double-action among civilian buyers. Early production runs encountered quality control challenges, particularly variances in cylinder timing that contributed to misfires and unreliable indexing. These issues were progressively addressed through refinements in later serial numbers, improving mechanical reliability prior to the transition to the succeeding M1892 series in the mid-1890s.

Variants

The Colt M1889 revolver was produced in both military and commercial variants, with the primary distinctions lying in finishes, grips, and markings to suit different users. The U.S. model, adopted in 1889, featured a blued finish for resistance in maritime environments and hard rubber grips with an oval "COLT" marking, along with specific inspector stamps and "U.S.N." inscriptions on the frame. In contrast, the commercial "New " version offered greater customization, including nickel-plated finishes for aesthetic appeal and options for checkered walnut or grips, without military-specific markings. Early production runs of the M1889 included limited chambering in .41 Long Colt caliber, primarily for commercial sales, before standardization on .38 Long Colt for military contracts to align with U.S. service ammunition. No significant frame size alterations were made across these variants, maintaining the original medium-frame design throughout. Following the introduction of the M1892 successor model, which addressed some mechanical issues like cylinder locking, a limited number of M1889 Navy revolvers were retrofitted with updated components, such as double locking notches on the cylinder, for continued Army use. These modifications were not widespread and did not alter the counterclockwise cylinder rotation inherent to the M1889 design. For export markets, minor adaptations of the M1889 appeared in small quantities, featuring altered placements or commercial-style markings to comply with foreign regulations, though no large-scale production variants were developed.

Service and Use

Military Adoption

The U.S. Navy adopted the Colt M1889 in 1889 as its standard sidearm, entering into a for 5,000 units to replace the existing .45-caliber single-action revolvers previously in service. The was completed between 1889 and 1890, marking the first widespread use of a swing-out double-action in U.S. naval forces. The U.S. Army implemented a limited adoption of the M1889 design in the early through its improved variant, the Model 1892, with initial issuances focused on officers and select units while older single-action models remained in broader use. Over 11,000 Model 1892 revolvers were procured between 1892 and 1893 for army integration. Training protocols for the M1889 emphasized double-action firing to enable rapid engagement in close-quarters scenarios, with the .38-caliber cartridge's manageable recoil aiding quick proficiency among sailors and soldiers. This approach facilitated faster familiarization compared to larger-caliber single-actions, supporting the revolver's role as a modernizing sidearm. Issuance included specialized leather holsters compatible with the M1889's frame and barrel length to ensure proper care and operational readiness within naval units. These accessories were integral to the revolver's initial integration into .

Combat Employment

The Colt M1889 revolver served as the primary sidearm for U.S. Navy personnel during the Spanish-American War of 1898, with limited adoption by units. Approximately 4,500 M1889 revolvers were in naval service by 1898. It was carried by sailors and in operations around , including aboard the prior to its sinking in on February 15, 1898. Several examples were recovered from the ship's wreckage during salvage efforts led by Captain William S. Cowles; one such revolver, a Model 1892 variant, was presented to and reportedly used by him in the battles of San Juan Hill and Kettle Hill. The revolver demonstrated notable reliability in the humid, tropical conditions of the , owing to its sturdy construction and resistance to rust, which proved advantageous for naval service in corrosive marine environments. However, early combat reports highlighted the cartridge's marginal stopping power against Spanish forces, though this limitation became more pronounced in subsequent conflicts. In the Philippine-American War (1899–1902) and the Boxer Rebellion (1900), the M1889 and its updated M1895 variant were issued to U.S. Marines and some infantry units for close-quarters engagements. Marines employed it during the suppression of Filipino insurgents and in the international relief expedition to , where it provided in urban and rugged terrain. The design's double-action mechanism, while innovative, was prone to jamming and misfires in double-action mode when exposed to dirt, sand, and heavy fouling common in these dusty, tropical theaters; this stemmed from weak tension, inadequate cylinder latches, and imprecise indexing in the original M1889 configuration, issues partially mitigated in later M1895 models through strengthened components. Despite these mechanical vulnerabilities, the revolver remained in frontline use until ammunition shortages and performance shortcomings prompted temporary reliance on older single-action pistols. By (1917–1918), the M1889 had been largely supplanted by the Colt M1911 pistol in combat roles but continued in reserve capacity for U.S. forces, particularly in training camps and rear-echelon duties. It equipped guards, support personnel, and trainees at stateside facilities, where its simplicity aided instruction despite the era's shift toward semi-automatic designs. Overall performance critiques centered on the .38 Long Colt's inadequate ballistics—delivering only about 187 foot-pounds of with a 148-grain at 755 feet per second—failing to reliably incapacitate determined adversaries like Moro warriors in the , who often charged under the influence of drugs or religious fervor. This led to urgent military calls for heavier calibers, influencing the development of the in 1905 and the adoption of the M1911 in 1911 as standard issue.

Commercial Aspects and Legacy

Civilian Market

The Colt M1889 revolver was introduced to the civilian market as the "Colt New Army and Navy Model" in 1889, positioning it as a cutting-edge double-action swing-out cylinder handgun suitable for self-defense, law enforcement, and sporting purposes. Marketed through Colt's established distribution networks, it appealed to urban professionals and sportsmen who valued its rapid reloading capability compared to earlier single-action designs. Production for commercial sales totaled approximately 26,500 units out of the model's overall run of 31,000 revolvers manufactured between 1889 and 1894, after Colt fulfilled an initial U.S. Navy contract for 5,000 examples. Nickel-plated finishes proved especially favored among civilian buyers for their durability and low-visibility suitability in scenarios, often paired with shorter 3-inch or 4.5-inch barrels. Accessories like shoulder holsters and cartridge loading tools were commonly offered, supporting its adoption by private security firms in growing urban centers during the 1890s and early 1900s. Commercial variants, such as those in or with custom grips, catered to diverse user preferences without altering the core . By the early , however, the M1889's declined as semi-automatic pistols gained traction for their higher capacity and faster follow-up shots, though some civilian and applications continued into the .

Collectibility

The Colt M1889 holds significant appeal among collectors as an , prized for its historical role as one of the earliest American double-action models with a solid-frame swing-out . Excellent-condition military-issue examples, particularly those retaining original U.S. markings, command premium prices in the current market, typically ranging from $1,000 to $2,500 USD as of 2025, depending on overall condition, matching serial numbers, and minimal alterations. Commercial variants, lacking military stamps, generally fetch $800 to $1,800 USD, with nickel-finished or special-order models at the due to their scarcity and aesthetic appeal. Rarity is a key driver of the M1889's collectibility, with total military production limited to approximately 5,000 units under the U.S. contract, of which about 4,637 were later modified to the Model 1895 standard, leaving only around 363 unaltered originals particularly desirable. Navy-marked specimens from ranges 1 to 5,000 are especially sought after, as these facilitate straightforward authentication through matching frame, barrel, and numbers. Collectors prioritize originality, with deviations such as replaced parts or post-factory refinishing significantly diminishing value. Preservation presents notable challenges for M1889 owners, as the revolver's age often results in common condition issues like bluing wear on high-friction areas such as the and frame edges, or cracking in the original hard rubber grips due to material degradation over time. No official modern reproductions exist from Colt or major manufacturers, preserving the model's authenticity, though replacement parts like springs, screws, and grips are obtainable from specialized suppliers to aid restoration without compromising historical integrity. Proper storage in low-humidity environments and avoidance of abrasive cleaning methods are essential to mitigate further deterioration. Culturally, the M1889 is valued in historical collections for its innovative contributions to revolver mechanics, representing a pivotal transition in American firearm design toward more reliable double-action systems. Examples are featured in prominent institutions such as the NRA National Firearms Museum, where they illustrate late-19th-century military armament evolution, and private assemblages focused on Colt's pre-1900 output. Its status as a bridge between earlier fixed-cylinder models and later military standards enhances its legacy among enthusiasts of antique handguns.

References

  1. https://www.colt.com/timeline/
  2. https://www.spanamwar.com/coltnavy.htm
  3. https://www.grandarmyofthefrontier.org/articles/m1889rev.htm
  4. https://www.frfrogspad.com/colt1889.htm
  5. https://www.americanrifleman.org/content/america-s-military-revolvers/
  6. https://www.nramuseum.org/guns/the-galleries/world-war-i-and-firearms-innovation/case-32-wwi-america-and-the-allies/webley-mk-i-revolver.aspx
  7. https://www.usni.org/magazines/naval-history-magazine/2013/january/new-navy-new-power
  8. https://centerofthewest.org/2025/07/08/an-unsung-hero-of-firearms-manufacturing/
  9. https://patents.google.com/patent/US392503A/en
  10. https://www.spanamwar.com/Colt1889series.htm
  11. https://archive.org/stream/Handguns_of_the_World_Stackpole_Books/Handguns_of_the_World_Stackpole_Books_djvu.txt
  12. https://www.history.navy.mil/our-collections/artifacts/arms-and-ordnance/small-arms/handguns/38-caliber-revolver-colt-navy-1889-1895.html
  13. https://bluebookofgunvalues.com/products/colt-model-1889-navy-new-navy-da-model-of-1889-1
  14. https://www.rockislandauction.com/detail/4095/176/colt-model-1889-new-navy-double-action-revolver-in-41-long-colt
  15. https://coltfever.com/new-army-navy/
  16. https://connecticuthistory.org/the-colt-patent-fire-arms-manufacturing-company/
  17. https://www.rockislandauction.com/detail/57/3661/rare-us-navy-colt-model-1889-double-action-38-revolver
  18. https://www.handgunsmag.com/editorial/featured_handguns_hg_coltrev_200803/138495
  19. https://gunsmagazine.com/our-experts/on-a-41-frame/
  20. https://www.rockislandauction.com/riac-blog/theodore-roosevelt-revolver-smith-and-wesson
  21. https://smallwarsjournal.com/2018/01/11/short-history-beloved-colt-1911-pistol
  22. https://www.rockislandauction.com/detail/47/1884/excellent-colt-model-1889-double-action-revolver
  23. https://www.rockislandauction.com/detail/78/3507/colt-model-1889-us-navy-contract-double-action-revolver
  24. https://truegunvalue.com/pistol/colt/1889-navy/price-historical-value-196
  25. https://legacy-collectibles.com/042823-5
  26. https://www.rockislandauction.com/detail/4093/313/unaltered-antique-us-navy-contract-colt-model-1889-revolver
  27. https://www.gunsinternational.com/guns-for-sale-online/revolvers/colt-revolvers---navy/colt-model-1889-revolver-rare--1-of-373-unaltered-u-s--navy--38--1-of-7-known-to-exist.cfm?gun_id=101856389
  28. https://digitalcommons.lindenwood.edu/cgi/viewcontent.cgi?article=1243&context=theses
Add your contribution
Related Hubs
User Avatar
No comments yet.