Hubbry Logo
Colt SCAMPColt SCAMPMain
Open search
Colt SCAMP
Community hub
Colt SCAMP
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Colt SCAMP
Colt SCAMP
Colt SCAMP
View on Wikipedia
from Wikipedia

The Colt SCAMP (Small CAliber Machine Pistol) was conceived in 1969 as a replacement to the aging Colt M1911A1 pistol.[3]

Key Information

Design

[edit]

The resulting weapon, embodied in a single SCAMP prototype built in 1971, was designed to give an individual operator a huge increase in firepower, with only a slight bump in weight and bulk. Both the pistol and the unique ammunition developed for the pistol, were shopped unsuccessfully around to the military through 1974. Though people who tested the SCAMP were impressed, no official interest developed. An article in Small Arms Review magazine reports the prototype remains in the Colt archival vault.[3]

Colt design engineer Henry A. Into recalled that they wanted a selective-fire weapon as the basis of their replacement for the M1911A1. Colt designers looked at the smallest submachine guns of the day (including the Czech Škorpion vz. 61, and Uzi), and tinkered with making full-auto versions of high-magazine-capacity pistols (such as the Browning Hi-Power). They eventually settled on an in-house design, Into recalled, which was a gas-operated, locked-breech weapon with select-fire capability, including three-shot burst.[3] The SCAMP's magazine had a similar capacity to a submachine gun, of 27 rounds.

SCAMP was designed to be controllable and accurate to fire. As such, it featured grips patterned after those found on target pistols, a bore set low over the hand to lower the center of gravity, and a burst-fire mode to allow multiple shots without the problem of prolonged recoil.[3] There was also a recoil compensator built into the muzzle.

The requirement for accuracy led to the design of an original cartridge for the SCAMP. The .223-caliber rifle round was first suggested but was found to be too hot for a handgun. The 9mm Parabellum round was also rejected for having a relatively heavy recoil, Into said in an interview. Into also rejected the .22 Winchester Magnum, 5-mm. Remington, and .22 Hornet.[3]

The design team eventually settled on the .221 Remington Fireball as the basis of their new cartridge, leading to the design of a .224-caliber centerfire cartridge known as the .22 SCAMP. This round was somewhat shorter and narrower than the Fireball.[3]

Despite positive reviews by the few military personnel who got to test the SCAMP, the ultimate response was the military was not looking to replace the M1911A1 pistol at the time.[3] Another source states the Army rejected the SCAMP in 1971 because it was already working on a parallel development, the 'Personal Defense Weapon'.[4] The Colt .45 ACP would not be replaced until 1985.

The SCAMP's cartridge was later rimmed so it could be used in revolvers, intended as a weapon for security forces. This also didn't sell.[3]

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Colt SCAMP

View on Grokipedia
from Grokipedia
The Colt SCAMP (Small CAliber Machine Pistol) was an experimental prototype developed by Colt in 1969–1971 as a lightweight, compact designed to provide controllable automatic fire for military personnel, such as support troops and vehicle crewmen, potentially replacing the aging M1911A1 pistol. Led by Colt engineer Henry A. Into, the SCAMP was Colt's first venture into the category, incorporating innovative features like a proprietary high-velocity .22 SCAMP centerfire cartridge (5.56×29mm, 40-grain bullet at approximately 2,100 ft/s ) derived from the , a gas-operated tilting mechanism, and a novel inverted hammer system. The weapon measured about 11.6 inches in length, 6.8 inches in height, and 1.4 inches in width, with an unloaded weight of approximately 2.25 pounds (1.02 kg), or 3.25 pounds (1.47 kg) loaded with a 27-round double-stack magazine, making it highly portable. Its select-fire operation included semi-automatic and three-round burst modes with a built-in for improved control and a cyclic rate of 1,200–1,500 rounds per minute, all housed in a glass-reinforced receiver with internals for durability and reduced weight. Unique design elements included a low to minimize , an integrated muzzle compensator and gas piston skirt to manage and , quick-point aiming sights inspired by the M16A1, and tool-less field stripping via a takedown latch, emphasizing ease of maintenance in combat scenarios. Only one prototype was produced by 1971, and it underwent informal testing by the U.S. Army at in 1974 and by evaluators, where it demonstrated high accuracy, reliable performance, and effective up to 100 yards, earning praise from designers like Into for meeting all performance goals. Despite its advanced concepts—predating modern PDWs like the MP7—the SCAMP never entered production due to shifting U.S. military priorities, competition from other projects, and Colt's internal decision to abandon further development without formal trials. The single prototype's whereabouts remain unknown, with Colt confirming in recent inquiries that it is no longer in their archives, rendering the SCAMP a notable but obscure footnote in firearms history.

History and Development

Conception and Background

In 1969, Colt Firearms conceived the SCAMP (Small CAliber Machine Pistol) as a potential replacement for the Colt M1911A1 , driven by the need to deliver increased firepower in a lightweight, compact form suitable for . The project emerged amid broader efforts by U.S. firearms manufacturers to innovate amid the 's , with Colt anticipating its retirement from active duty. The initiative reflected the U.S. Armed Forces' growing demand for effective personal defense weapons (PDWs) during the , where experiences in close-quarters combat highlighted vulnerabilities for non-frontline personnel such as pilots, aircrews, and vehicle operators. crews, in particular, required sidearms for survival after forced landings in hostile territory, but standard issues like the .38 proved inadequate for rapid, accurate engagement at short ranges. Colt positioned the SCAMP to meet these needs by emphasizing portability and suppressive capability for support roles. Henry A. Into, Colt's former manager of engineering, led the design team to align the weapon with strict military trial criteria, including a compact size under 12 inches in length, a loaded weight below 3 pounds, high controllability to minimize , and selective-fire functionality for controlled bursts. Into envisioned the SCAMP not merely as a but as a versatile for individual defense in dynamic combat scenarios. To achieve these goals, the project included development of a high-velocity .22-caliber cartridge optimized for the platform's performance.

Prototyping and Military Evaluation

The Colt SCAMP was completed in by a Colt design team led by engineer Henry A. Into, resulting in a single functional example constructed as a compact, select-fire . This one-off build incorporated a glass-reinforced receiver and stainless steel components, aligning with the project's goals of lightweight operation and enhanced controllability over traditional pistols. Only one was produced, and its whereabouts are unknown as of 2025; it was sold from Colt's collection to the late John Keosayian and may have been included in his estate dispersal. Between 1971 and 1974, Colt actively pitched the SCAMP to U.S. military branches, focusing on the and as a potential replacement for the M1911A1 or a specialized tool. Demonstrations emphasized the weapon's superior controllability in three-round bursts and practical accuracy during informal range sessions at Colt's facilities. In 1974, Master Sergeant Fred White from the 's conducted hands-on evaluations during a factory visit, noting its compact stowage and rapid handling. The U.S. 's personnel also reviewed it unofficially for aircrew defense applications, comparing it to experimental designs like the . Military evaluations ultimately led to rejection, as neither branch expressed official interest in adopting the SCAMP to supplant the M1911A1, viewing it as unnecessary amid existing sidearm . The , in particular, prioritized parallel initiatives over pistol-based solutions like the SCAMP. Lacking procurement support, Colt abandoned further development by late , shelving the project entirely.

Design and Features

Operating Mechanism

The Colt SCAMP utilizes a gas-operated, locked-breech mechanism featuring an annular gas piston encircling the barrel, which operates on a short-stroke principle to drive the bolt assembly rearward upon firing. Gases diverted through barrel ports enter a chamber formed by the piston's forward skirt and the integral muzzle compensator, imparting a brief impulse to the operating rod and bolt for unlocking and extraction, thereby minimizing transfer to the shooter and enhancing stability in its compact frame. The locking system employs a that engages a single locking shoulder in the receiver via a pivoting block, securing the breech during the high-pressure phase of the firing cycle before the short-stroke action unlocks it for . This locked-breech design permits the use of higher-pressure cartridges than comparable blowback-operated pistols of similar size, supporting greater accuracy and reliability at short engagement distances without excessive size or weight penalties. Selective-fire functionality includes semi-automatic single-shot mode and full-automatic fire restricted to three-round bursts via a mechanical limiter, consisting of a ratchet-type burst sear and a rotating counter that tracks releases and disengages the trigger mechanism after the preset round count. The cyclic rate during bursts reaches approximately 1,500 rounds per minute, optimized for controlled, rapid delivery while preventing overheating or loss of control in sustained fire. Recoil management is further refined by a low , achieved through positioning the barrel close to the grip centerline with the inverted and firing components mounted above, which lowers the torque and during bursts. An integral compensator at the muzzle, with upward- and side-venting ports, redirects gases to counteract flip, ensuring the weapon remains on target even in rapid-fire sequences.

Ergonomics and Controls

The Colt SCAMP featured target pistol-style grips designed with a high grip angle and integrated thumb rest, promoting natural pointability and aligning the bore low relative to the hand to reduce perceived during firing. This configuration, combined with the firing mechanism positioned above and behind the grip, created a distinctive rear hump that enhanced overall handling for non-specialist operators. The grips were constructed from glass-reinforced , contributing to the weapon's lightweight and ergonomic profile suitable for holster carry and extended use. Controls on the SCAMP were ambidextrous, including a three-position selector switch (safe, semi-automatic, and three-round burst) mounted high on the receiver for intuitive access from either hand, a dedicated burst limiter integrated into the , and a magazine release positioned at the base of the grip for rapid reloading. These features allowed quick mode changes and manipulations, prioritizing ease of use in dynamic scenarios. The fixed were optimized for close-range engagements, effective out to approximately 50 meters, with an open partridge-style rear adjustable for and a front post protected by an aluminum housing; a raised rib along the top of the receiver facilitated rapid similar to a . The barrel was threaded for optional suppressor attachment, enabling compatibility with sound suppression devices without altering the core ergonomic layout. Overall balance was achieved through centered , with the loaded weight at around 3 pounds, allowing effective one-handed operation while providing sufficient stability for two-handed control during three-round bursts; this was further aided by the gas-operated system's low impulse.

Ammunition and Feeding System

The .22 SCAMP Cartridge

The .22 SCAMP, designated as the 5.56×29mm cartridge, was a proprietary bottlenecked, centerfire round developed by Colt between 1969 and 1971 specifically for the SCAMP machine pistol project. This experimental ammunition drew from the .221 Remington Fireball case design, which was shortened and modified to create a compact yet high-performance option suitable for personal defense applications. The rimless base facilitated reliable feeding in the weapon's automatic mechanism, while the overall configuration emphasized controllability in burst fire. Key design features included a 40-grain jacketed spitzer bullet, optimized for high velocity and aerodynamic stability. From the SCAMP's approximately 9-inch barrel, the round achieved a muzzle velocity of around 2,100 feet per second, delivering energy comparable to intermediate rifle cartridges in a lightweight package. This performance stemmed from the cartridge's efficient powder burn in a short case, enabling flat trajectories and enhanced penetration against soft body armor—superior to standard .22 Long Rifle rounds—without excessive recoil for a handgun platform. The purpose was to bridge the gap between pistol and rifle ammunition, providing military personnel with increased firepower in a compact, low-weight format weighing roughly 40 grains per projectile. A rimmed variant of the .22 SCAMP was later prototyped by Colt to enable compatibility with revolvers, targeting potential civilian or security force applications. This modification aimed to expand the cartridge's utility beyond autoloading firearms but saw limited development and no commercialization or widespread sales.

Magazine and Ballistics

The Colt SCAMP employs a double-stack, detachable box magazine with a capacity of 27 rounds, inserted vertically into the grip to preserve the weapon's compact and low-profile design. An 18-round variant was also prototyped and demonstrated to U.S. Air Force evaluators. This configuration allows for high-capacity feeding in a pistol-sized frame, supporting the SCAMP's role as a personal defense weapon. The cartridge's bottlenecked shape contributes to reliable chambering during the feeding cycle. Ballistically, the .22 SCAMP round achieves a muzzle velocity of 2,100 feet per second from the weapon's approximately 9-inch barrel, delivering a flat trajectory suitable for close-quarters engagements. The effective range for point targets is approximately 100 meters, while the maximum range in burst fire extends up to 5,600 feet, though practical use is limited to shorter distances. This performance provides superior muzzle energy compared to later personal defense weapon cartridges like the 5.7×28mm, emphasizing high velocity over mass for its .22-caliber projectile. In terms of , the high-velocity 40-grain bullet is optimized for soft-tissue disruption and penetration of light barriers, making it effective against unarmored threats in personal defense scenarios. The design prioritizes rapid energy transfer upon impact while maintaining controllability in the compact platform. is minimal, owing to the light cartridge weight and an integrated compensator with two ports, which, combined with the three-shot burst limiter, enables accurate fire in bursts at 10-20 meters without significant .

Specifications and Performance

Physical Characteristics

The Colt SCAMP prototype measured 11.6 inches in overall length, with a barrel length of 9.12 inches, resulting in a compact, pistol-like profile suitable for personal defense roles. Its height was under 7 inches and width approximately 1.4 inches, further emphasizing its portability and concealability compared to full-sized submachine guns of the era. The weapon weighed 2.25 pounds when empty and 3.24 pounds when loaded with a full 27-round magazine, achieved through the use of lightweight materials that balanced durability with reduced carry burden. The construction featured a receiver housing made from glass-reinforced, high-impact plastic or fiberglass-reinforced for the external shell, paired with for the moving parts and internal components, while minor elements like the front sight utilized anodized aluminum. grip panels incorporated a thumb-rest design with the bore positioned low relative to the hand, enhancing without a traditional to prioritize quick deployment and holster carry. For accessories, the SCAMP included a threaded muzzle integrated with a compact compensator to manage , allowing potential compatibility with suppressors in its prototype configuration. Sighting was limited to simple , consisting of an open partridge rear adjustable for and a fixed front , with a quick-point aiming rib for rapid ; no optics rail was present in the design.

Operational Capabilities

The Colt SCAMP was designed for short, controlled engagements as a , featuring a select-fire mechanism limited to semi-automatic and three-round burst modes to optimize conservation and maintain controllability in close-quarters scenarios. The three-round burst mode operated at a cyclic rate of 1200 to 1500 rounds per minute, allowing rapid delivery of fire while minimizing buildup and preventing overheating during brief bursts typical of its intended personal defense role. This configuration emphasized precision over sustained automatic fire, aligning with the weapon's lightweight construction for enhanced maneuverability. In terms of effective firing range, the SCAMP achieved aimed accuracy out to approximately 100 yards (91 meters), with its controllability enabling reliable hits on man-sized targets up to 125 meters under optimal conditions. The 9.12-inch barrel contributed to this compact profile but prioritized velocity from the proprietary .22 SCAMP cartridge over extended ballistic performance. Its gas-operated, locked-breech system with a tilting provided tolerance for dirt, , and varying environmental conditions, enhancing operational reliability in field use. Demonstrations in the revealed minimal malfunctions, with testers reporting consistent performance across multiple firings, attributed to the use of components and a simplified maintenance design. The burst-only automatic capability further supported its PDW function by reducing the risk of wasteful full-auto discharge, ensuring efficient ammo use in defensive situations without compromising the weapon's portability.
Add your contribution
Related Hubs
User Avatar
No comments yet.