Community hub
0 subscribers7 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to F16C.
Nothing was collected or created yet.
from Wikipedia
 | This article includes a list of general references, but it lacks sufficient corresponding inline citations. (December 2013) |
The F16C[1] (previously/informally known as CVT16) instruction set is an x86 instruction set architecture extension which provides support for converting between half-precision and standard IEEE single-precision floating-point formats.
History
[edit]The CVT16 instruction set, announced by AMD on May 1, 2009,[2] is an extension to the 128-bit SSE core instructions in the x86 and AMD64 instruction sets.
CVT16 is a revision of part of the SSE5 instruction set proposal announced on August 30, 2007, which is supplemented by the XOP and FMA4 instruction sets. This revision makes the binary coding of the proposed new instructions more compatible with Intel's AVX instruction extensions, while the functionality of the instructions is unchanged.
In recent documents, the name F16C is formally used in both Intel and AMD x86-64 architecture specifications.
Technical information
[edit]There are variants that convert four floating-point values in an XMM register or 8 floating-point values in a YMM register.
The instructions are abbreviations for "vector convert packed half to packed single" and vice versa:
VCVTPH2PS xmmreg,xmmrm64– convert four half-precision floating point values in memory or the bottom half of an XMM register to four single-precision floating-point values in an XMM register.VCVTPH2PS ymmreg,xmmrm128– convert eight half-precision floating point values in memory or an XMM register (the bottom half of a YMM register) to eight single-precision floating-point values in a YMM register.VCVTPS2PH xmmrm64,xmmreg,imm8– convert four single-precision floating point values in an XMM register to half-precision floating-point values in memory or the bottom half an XMM register.VCVTPS2PH xmmrm128,ymmreg,imm8– convert eight single-precision floating point values in a YMM register to half-precision floating-point values in memory or an XMM register.
The 8-bit immediate argument to VCVTPS2PH selects the rounding mode. Values 0–4 select nearest, down, up, truncate, and the mode set in MXCSR.RC.
Support for these instructions is indicated by bit 29 of ECX after CPUID with EAX=1.
CPUs with F16C
[edit]- AMD:
- Jaguar-based processors
- Puma-based processors
- "Heavy Equipment" processors
- Piledriver-based processors, Q4 2012[3]
- Steamroller-based processors, Q1 2014
- Excavator-based processors, Q2 2015
- Zen-based processors, Q1 2017, and newer
- Intel:
- Ivy Bridge processors and newer
References
[edit]- ^ Chuck Walbourn (September 11, 2012). "DirectXMath: F16C and FMA".
- ^ "128-Bit and 256-Bit XOP, FMA4 and CVT16 Instructions" (PDF). AMD64 Architecture Programmer's Manual. Vol. 6. 2009-05-01. Archived from the original (PDF) on 2009-05-20. Retrieved 2022-07-05.
- ^ New "Bulldozer" and "Piledriver" Instructions (PDF), AMD, October 2012
External links
[edit]- New Bulldozer and Piledriver Instructions [1] Archived 2013-01-07 at the Wayback Machine
- DirectX math F16C and FMA [2]
- AMD64 Architecture Programmer's Manual Volume 1 [3] Archived 2013-12-14 at the Wayback Machine
- AMD64 Architecture Programmer's Manual Volume 2 [4]
- AMD64 Architecture Programmer's Manual Volume 3 [5] Archived 2013-12-14 at the Wayback Machine
- AMD64 Architecture Programmer's Manual Volume 4 [6] Archived 2021-11-14 at the Wayback Machine
- AMD64 Architecture Programmer's Manual Volume 5 [7] Archived 2013-12-14 at the Wayback Machine
- IA32 Architectures Software Developer Manual [8]
from Grokipedia
The F16C (16-bit Floating-Point Conversion) instruction set is an extension to the x86 and AMD64 architectures that enables efficient conversion between half-precision (16-bit) floating-point values and single-precision (32-bit) floating-point values, primarily through two core instructions: VCVTPS2PH for converting from single- to half-precision and VCVTPH2PS for the reverse.[1] Originally announced by AMD on May 1, 2009, under the informal name CVT16 as part of broader SSE enhancements, it builds on the 128-bit SSE instruction set to support emerging needs in graphics, machine learning, and high-performance computing where half-precision formats reduce memory bandwidth and storage requirements without significant loss of accuracy.[2]
F16C requires underlying support for AVX (Advanced Vector Extensions) and is detected via the CPUID instruction (leaf 01H:ECX bit 29).[1] AMD first implemented F16C in its Piledriver microarchitecture-based processors, such as the FX-8000 series, released in the fourth quarter of 2012, marking an upgrade from the prior Bulldozer cores that lacked this feature.[3] Intel introduced F16C support starting with its Ivy Bridge microarchitecture in 2012, following initial AVX availability in Sandy Bridge (2011), and it has since become a standard feature in subsequent generations from both vendors, including AMD's Zen architectures and Intel's Core and Xeon series.[4]
The extension's instructions operate on packed data formats, allowing up to four half-precision values to be processed in 128-bit XMM registers or eight in 256-bit YMM registers when combined with AVX, with rounding modes configurable via the MXCSR register for precise control in numerical computations.[1] While F16C does not introduce full half-precision arithmetic, it accelerates data format conversions critical for interoperability with storage formats like those in IEEE 754-2008 half-precision, and later extensions like AVX-512-FP16 have built upon it for native FP16 operations.[1] Adoption has been widespread in software libraries for scientific computing and AI, where it optimizes performance on compatible hardware without requiring specialized accelerators.
Overview
Definition and Purpose
F16C, or 16-bit Floating Point Conversion, is an x86 SIMD instruction set extension that enables direct hardware-accelerated conversions between half-precision (IEEE 754 binary16, 16-bit) and single-precision (IEEE 754 binary32, 32-bit) floating-point formats.[1] This extension operates on packed data within SIMD registers, allowing multiple conversions to occur in parallel to support efficient processing of vectorized floating-point operations.[1] The core purpose of F16C is to optimize performance in applications that rely on half-precision arithmetic by providing dedicated instructions for format conversions, thereby reducing the computational overhead associated with software-based emulation.[1] It addresses bottlenecks in scenarios where memory bandwidth and storage efficiency are critical, such as in graphics rendering for compact representation of textures and vertices, and in machine learning for handling large datasets of weights and activations in neural networks.[1] Key benefits include enhanced efficiency in data transfer and computation, as F16C allows native handling of 16-bit floats through SIMD pathways, avoiding the need for multiple scalar operations or intermediate precision adjustments that would otherwise slow down workflows in scientific computing and multimedia processing.[1] This hardware support facilitates broader adoption of reduced-precision formats without sacrificing overall system performance.[1]Relation to Floating-Point Standards
The F16C extension operates within the framework of the IEEE 754 standard for binary floating-point arithmetic, specifically facilitating conversions between the binary16 (half-precision) and binary32 (single-precision) formats defined in IEEE 754-2008 and reaffirmed in IEEE 754-2019.[5][1] The binary16 format, also known as half-precision, consists of 1 sign bit, 5 exponent bits with a bias of 15, and 10 mantissa bits (with an implicit leading 1 for normalized numbers, providing 11 bits of precision).[5] This structure yields a dynamic range from approximately (smallest positive subnormal) to (largest finite number) and a precision of about 3 decimal digits.[5] In contrast, the binary32 format, or single-precision, features 1 sign bit, 8 exponent bits with a bias of 127, and 23 mantissa bits (24 bits of precision including the implicit 1), serving as the foundational format for most floating-point operations in x86 architectures.[5][1] F16C bridges these formats through dedicated instructions like VCVTPS2PH and VCVTPH2PS, which perform packed conversions while maintaining IEEE 754 compliance, including support for specified rounding modes via the MXCSR register or immediate operands.[1] This enables x86 processors to integrate half-precision data—prevalent in GPU-accelerated AI models and machine learning workloads that prioritize memory efficiency—directly into SIMD pipelines optimized for single-precision, without deviating from standard arithmetic behaviors.[1][6] While half-precision halves memory usage compared to single-precision for large datasets, it imposes limitations such as a narrower dynamic range and lower precision, potentially leading to overflow, underflow, or rounding errors in computations requiring higher fidelity.[5]History
Origins and Announcement
The F16C instruction set originated from AMD's initiatives to extend the x86 instruction architecture for improved SIMD capabilities. Announced by AMD on May 1, 2009, as CVT16, it formed a key subset of the revised SSE5 extensions, specifically designed for the Bulldozer microarchitecture to facilitate conversions between half-precision (16-bit) and single-precision (32-bit) floating-point formats.[7][2] This announcement coincided with AMD's release of detailed technical documentation, including the AMD64 Architecture Programmer's Manual Volume 6, which outlined CVT16 alongside related extensions like XOP and FMA4 as successors to the original SSE5 proposal.[2] To promote interoperability across x86-64 implementations, AMD renamed the extension from CVT16 to F16C, aligning it with Intel's AVX framework and ensuring compatibility in joint architecture specifications. This evolution reflected AMD's strategic shift announced in May 2009 to support Intel's AVX instructions, avoiding divergence in vector processing standards.[8] The primary motivations for F16C stemmed from the need for memory-efficient floating-point operations amid rising demands in graphics, such as DirectX applications, and high-performance computing for multimedia and scientific workloads. By enabling half-precision conversions, it reduced bandwidth usage and register overhead while boosting overall SIMD throughput.[2][9]Standardization and Adoption
Intel adopted the F16C instruction set extension in 2011 as part of its Advanced Vector Extensions (AVX), implementing the half-precision floating-point conversion instructions independently to streamline integration into the x86 architecture. This move separated F16C from earlier proposals like AMD's SSE5, allowing broader compatibility without the full complexity of those extensions. The first hardware implementation appeared in Intel's Ivy Bridge processors, released on April 29, 2012. AMD followed with support in its Piledriver microarchitecture, debuting in the FX-series desktop processors such as the FX-8350 on October 23, 2012.[3] F16C was incorporated into the x86-64 architecture specifications documented in both Intel's and AMD's programmer's manuals, promoting binary compatibility across processors from both vendors. This inclusion ensured that software compiled with F16C instructions could execute seamlessly on supported hardware without vendor-specific modifications, aligning with the collaborative evolution of the x86 instruction set. The extension's definition, including the VCVTPS2PH and VCVTPH2PS instructions, was standardized in these manuals to support efficient conversions between 16-bit half-precision and 32-bit single-precision floating-point formats.[1] The development and adoption of F16C were driven by growing industry needs for hardware-accelerated half-precision floating-point operations, particularly to support FP16 data formats in graphics APIs like OpenGL, which had introduced half-float textures for improved texture compression and rendering efficiency, and in compute frameworks such as CUDA, where software-based conversions previously limited performance in machine learning and scientific simulations. This predated more comprehensive FP16 capabilities, such as those in AVX-512 FP16, by providing a focused solution for conversion tasks that reduced bandwidth and storage demands in bandwidth-constrained applications.[9] Key milestones in F16C's adoption included Microsoft's integration of the extension into its DirectXMath library in September 2012, enabling optimized half-to-single precision stream conversions via intrinsics in Visual Studio 2012 and later, with runtime detection for Ivy Bridge and Piledriver processors. By January 2013, F16C received formal ratification in updates to Intel's Software Developer's Manual, detailing the instructions' behavior, CPUID detection (bit 29 in ECX of leaf 1), and OS support requirements like OSXSAVE for state management. These steps facilitated widespread software enablement and verified the extension's reliability across x86 platforms.[9][10]Technical Details
Instructions
The F16C extension introduces two primary instructions for converting between half-precision (16-bit) floating-point and single-precision (32-bit) floating-point formats: VCVTPH2PS and VCVTPS2PH. These instructions enable efficient packed conversions, supporting vector widths of 128 bits (processing 4 elements) or 256 bits (processing 8 elements) in AVX contexts.[11][12] VCVTPH2PS converts packed half-precision floating-point values from the source operand to single-precision values in the destination register. Its syntax is VCVTPH2PS xmm1, xmm2/m64 for 128-bit operations (converting 4 half-precision elements) or VCVTPH2PS ymm1, xmm2/m128 for 256-bit operations (converting 8 half-precision elements), where the source can be an XMM register or 64/128-bit memory operand. The instruction loads the low-order bits of the source, performs the conversion without altering the upper bits of the destination beyond zeroing them in VEX-encoded versions, and ignores denormal handling flags like MXCSR.DAZ. It requires the F16C feature and uses a VEX prefix for AVX compatibility, with VEX.vvvv encoded as 1111b to indicate no third operand.[11] VCVTPS2PH performs the reverse conversion, transforming packed single-precision values to half-precision. The syntax is VCVTPS2PH xmm1, xmm2/m128, imm8 for 128-bit operations or VCVTPS2PH xmm1, ymm2, imm8 for 256-bit operations, producing 64 or 128 bits of half-precision output stored in an XMM register or memory. The 8-bit immediate operand controls rounding behavior, with bits 1:0 selecting modes such as round to nearest even or truncate, and bit 2 determining whether to use the MXCSR register for rounding control. Like VCVTPH2PS, it employs a VEX prefix for AVX integration, zeroing unused destination bits, and supports masking in EVEX versions for AVX-512. Rounding modes are further detailed in the dedicated section on precision control.[12] In operation, both instructions accept inputs from XMM/YMM registers or aligned memory locations and direct outputs to XMM/YMM registers, with no dependencies on prior computational states beyond the source operands themselves. The VEX prefix ensures seamless integration with AVX pipelines, allowing these conversions to execute as independent vector operations without affecting flags or requiring additional setup. On supporting hardware, VCVTPH2PS and VCVTPS2PH exhibit typical latencies of 4-10 cycles, with throughput enabling 1 operation per cycle in modern Intel cores like Haswell and Skylake, though earlier implementations such as Ivy Bridge show latencies up to 10 cycles for VCVTPS2PH.[11][12][13]Registers and Operands
F16C instructions primarily utilize the XMM and YMM registers from the SSE and AVX extensions of the x86 architecture. Each XMM register is 128 bits wide, allowing it to hold four packed half-precision (16-bit IEEE 754) or four single-precision (32-bit) floating-point values. YMM registers extend this to 256 bits, accommodating eight values of either format. Core F16C does not include support for the 512-bit ZMM registers, which are part of the later AVX-512 extensions.[14] The operand structure for F16C conversion instructions—VCVTPS2PH (single-precision to half-precision) and VCVTPH2PS (half-precision to single-precision)—employs vector registers or aligned memory as sources and registers as destinations. Source operands can be XMM or YMM registers, or memory locations specified as m128 (for 128-bit operations) or m256 (for 256-bit operations). Destination operands are restricted to XMM or YMM registers, though VCVTPS2PH supports memory destinations (m64 or m128) in certain encodings. These instructions also implicitly use the MXCSR register to determine default rounding behavior when no explicit control is provided via an 8-bit immediate operand.[14] For optimal execution, memory operands must be aligned on 16-byte boundaries for XMM-based operations and 32-byte boundaries for YMM-based operations; while unaligned accesses are permitted, they can result in significant performance degradation due to additional hardware handling. F16C integrates directly into the SSE and AVX SIMD pipelines, enabling efficient half-precision conversions within existing vector processing flows while preserving the independence of scalar floating-point operations in the x87 FPU.[14]Rounding and Precision Control
The F16C extension provides flexible rounding control for the single-precision to half-precision conversion instruction VCVTPS2PH through an 8-bit immediate operand (Imm8). The Imm8[1:0] bits specify the rounding mode as follows: 00b for round to nearest (ties to even), 01b for round toward negative infinity, 10b for round toward positive infinity, and 11b for round toward zero (truncate).[12] If Imm8[15] is set to 1, the rounding mode is instead determined by the rounding control field (RC) in the MXCSR register, overriding the Imm8[1:0] specification; Imm8 bits [7:3] are ignored in all cases.[12] Underflow results in VCVTPS2PH are converted to denormal half-precision values rather than being flushed to zero, independent of the MXCSR flush-to-zero (FTZ) flag.[12] In contrast, the half-precision to single-precision conversion instruction VCVTPH2PS employs the rounding mode specified in the MXCSR register, defaulting to round to nearest with ties to even, ensuring the output achieves full single-precision accuracy without additional quantization loss beyond the input format's limitations.[11] The single-to-half conversion in VCVTPS2PH, however, can introduce quantization errors due to the reduced 10-bit mantissa in half-precision compared to the 23-bit mantissa in single-precision, potentially altering the represented value.[16] All F16C conversion operations maintain compliance with IEEE 754-2008 standards for floating-point exceptions, including no generation of signaling NaNs during conversions; invalid operations may still raise exceptions if unmasked.[12] Denormal inputs and outputs are handled according to the denormals-are-zero (DAZ) and FTZ flags in the MXCSR register: DAZ treats denormal inputs as zero for computations, while FTZ flushes denormal outputs to zero, though MXCSR.DAZ is ignored for half-precision inputs in VCVTPH2PS, processing them as full denormals.[16][11]Processor Support
Intel Implementations
Intel's initial implementation of the F16C instruction set extension appeared in the Ivy Bridge microarchitecture, introduced in 2012 on a 22 nm process node.[17] Full F16C support was available across all Ivy Bridge models equipped with AVX, enabling efficient half-precision floating-point conversions in vector operations.[18] Subsequent generations, beginning with Haswell in 2013, continued to incorporate F16C without interruption, integrating it alongside enhancements like AVX2 in Haswell and Broadwell, and AVX-512 in select later architectures such as Skylake-SP and beyond.[17] This seamless inclusion ensured compatibility and performance scaling in evolving vector processing pipelines, with no deprecation in Intel's roadmap.[17] F16C operations are handled within the processor's vector execution units, utilizing the existing floating-point and SIMD infrastructure for conversions between half-precision and single-precision formats.[17] In contemporary designs like Alder Lake from 2021 onward, these instructions leverage hybrid core architectures for improved power efficiency, particularly in mixed workloads involving AVX instructions.[17] Server-oriented Xeon processors gained F16C support starting with the Ivy Bridge-EP series (E5 v2 family) in 2012, extending the extension to high-performance computing environments.[19] Similarly, mobile Core i-series processors included F16C from the 3rd generation (Ivy Bridge) in 2012, aligning client and embedded variants with desktop capabilities.[18]AMD Implementations
AMD introduced support for the F16C instruction set with its Piledriver microarchitecture in 2012, marking the first implementation in products such as the Trinity APUs and FX-series desktop processors.[20] These instructions were developed as part of AMD's earlier SSE5 extension proposal, providing hardware acceleration for half-precision floating-point conversions.[21] Subsequent AMD architectures built upon this foundation, with Excavator in 2015 continuing support alongside the addition of AVX2.[22] Starting with the Zen microarchitecture in 2017, F16C became a standard feature in Ryzen consumer processors and EPYC server processors, such as the Naples-based first-generation EPYC lineup, fully integrated with AVX2 vector capabilities.[23] All x86-64 AMD CPUs released after 2012 include F16C support, ensuring broad compatibility across desktop, mobile, and server segments.[24] In early implementations like Piledriver, F16C instructions such as VCVTPS2PH and VCVTPH2PS exhibited latencies of 7-8 clock cycles with a throughput of 2 instructions per cycle, processed via the floating-point execution units.[13] Excavator reduced this to 6-8 cycles while maintaining similar throughput. The Zen architecture further optimized performance, achieving 6-cycle latency and 2 instructions per cycle throughput, with Zen 2 in 2019 enhancing vector unit efficiency to 3-cycle latency and 1 instruction per cycle, benefiting applications requiring frequent half-precision conversions.[13] These improvements reflect AMD's evolution toward lower-latency floating-point operations compared to the initial Piledriver design.Detection Methods
Software detects F16C support primarily through the CPUID instruction, which queries the processor for feature flags. To check for F16C, software sets the EAX register to 1 (indicating the processor info and feature flags leaf) and executes CPUID; the resulting value in the ECX register has bit 29 set to 1 if the processor supports 16-bit floating-point conversion instructions.[25] This method is standardized across x86 processors from both Intel and AMD that implement F16C. Runtime detection often employs compiler intrinsics to invoke CPUID safely. In C++ with Microsoft Visual C++ (MSVC), the __cpuid intrinsic from <intrin.h> populates an array with the CPUID results, allowing software to inspect ECX[26]; if unsupported, it falls back to software emulation for half-precision operations, such as scalar or vectorized conversions using full-precision intermediates. Similarly, GCC and Clang provide the __cpuid intrinsic via <cpuid.h> or __builtin_ia32_cpuid, and a higher-level __builtin_cpu_supports("f16c") function for direct feature querying, enabling dynamic dispatch to F16C-optimized code paths.[27] F16C compatibility requires prior support for AVX, as its instructions use VEX encoding; thus, detection should also verify ECX[28] (AVX flag) is set to 1, ensuring the processor handles 256-bit YMM registers. Additionally, operating system support is necessary in 64-bit mode, particularly for saving and restoring extended state (XSAVE) via OSXSAVE (ECX[29]) to avoid corruption of YMM registers during context switches.[25] Compiler libraries facilitate conditional use of F16C. MSVC's <intrin.h> offers intrinsics like _mm_cvtph_ps for converting half-precision to single-precision vectors, which can be guarded by runtime checks or compile-time flags like /arch:AVX. In GCC, <x86intrin.h> provides equivalent intrinsics, with attribute((target("f16c"))) for function multiversioning to generate F16C-specific code only when available, promoting portability across hardware.[29]Applications
Computational Uses
F16C instructions facilitate efficient conversions between single-precision (FP32) and half-precision (FP16) floating-point formats, enabling performance-critical computations that benefit from reduced memory footprint and bandwidth demands. In graphics and image processing applications, F16C accelerates data conversions for half-precision formats, which halve the memory requirements for float data compared to FP32 while preserving sufficient precision.[28] In machine learning workflows, F16C supports mixed-precision computations on x86 CPUs by streamlining FP16 data type conversions, minimizing overhead in pipelines that use half-precision storage to reduce memory demands. This allows for larger models or batch sizes on compatible hardware. For high-performance computing (HPC) in scientific simulations, F16C aids in optimizing memory-bound operations on large-scale arrays through efficient FP16 conversions, reducing data storage needs and potentially enhancing throughput for iterative solvers without significant accuracy degradation. Overall, workloads heavy in format conversions benefit from halved data sizes compared to scalar or SSE2-based methods, alleviating cache and memory bottlenecks in FP16-dominant pipelines.Software Integration
Compilers provide intrinsic functions to access F16C instructions, enabling developers to perform half-precision floating-point conversions directly in code. In GCC and Clang, intrinsics such as_mm_cvtph_ps for converting packed half-precision values to single-precision are available, with support enabled via the -mf16c optimization flag that allows auto-vectorization of compatible code paths.[29][32] Microsoft Visual C++ (MSVC) has supported F16C intrinsics, including _mm_cvtph_ps, since Visual Studio 2012, integrating them into the immintrin.h header without requiring specific architecture flags beyond enabling AVX.[33][9]
Several libraries leverage F16C for efficient half-precision operations in domain-specific applications. Microsoft's DirectXMath library, introduced in 2012, incorporates F16C intrinsics like _mm_cvtph_ps for converting between half and single-precision floats, optimizing vector math in game development scenarios.[9] Intel's oneDNN library for deep learning supports half-precision (f16) data types on x86 CPUs, utilizing conversions as part of its CPU backend optimizations in AI workloads.[34] In Python ecosystems, NumPy and SciPy provide support for float16 types, benefiting from CPU features for improved performance in numerical computations.
Operating systems and runtime environments facilitate F16C through their toolchain integrations. On Windows, F16C is accessible via MSVC intrinsics in the Visual Studio toolchain, with runtime libraries like the Universal C Runtime supporting AVX-dependent features.[35] Linux distributions provide F16C support in GCC and Clang compilers bundled with glibc-based systems, allowing seamless use in standard C/C++ development.[29] macOS integrates F16C via Xcode's Clang compiler, enabling intrinsics in Apple Silicon and Intel-based builds for cross-platform applications. Just-in-time (JIT) compilers, such as LLVM's ORC JIT, detect CPU features at runtime using CPUID and dynamically emit F16C instructions for optimized code generation in dynamic languages or interpreters.
Best practices for integrating F16C emphasize runtime feature detection to ensure compatibility across hardware. Developers typically query the CPUID instruction (leaf 1, bit 29 in ECX) to check for F16C availability before dispatching to hardware-accelerated paths, falling back to software emulation using SSE2 instructions for conversion on older processors without native support.[36][37] This approach, often implemented via helper functions in libraries like DirectXMath, minimizes performance penalties while maximizing portability.[9]References
- May 3, 2009 · This volume describes the 128-bit and 256-bit XOP, FMA4 and CVT16 instruction extensions. ... May 2009. AMD64 Technology Documentation Updates. 64 ...
- Feb 1, 2023 · Half precision (also known as FP16) data compared to higher precision FP32 vs FP64 reduces memory usage of the neural network, allowing ...
- Sep 10, 2013 · AVX has been extended to support F16C (16-bit Floating-Point conversion instructions) to accelerate data conversion between 16-bit and 32-bit ...
- This includes MOVBE, F16C, BMI, AVX, PCLMUL, AES, SSE4.2, SSE4.1, CX16, ABM, SSE4A, SSSE3, SSE3, SSE2, SSE, MMX and 64-bit instruction set extensions.