Hubbry Logo
GWR 6100 ClassGWR 6100 ClassMain
Open search
GWR 6100 Class
Community hub
GWR 6100 Class
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
GWR 6100 Class
GWR 6100 Class
GWR 6100 Class
View on Wikipedia
from Wikipedia

GWR 6100 Class
6147 at Swindon Works on 26 April 1964 after overhaul
Type and origin
Power typeSteam
DesignerCharles Collett
BuilderGWR Swindon Works
Order numberLots 269, 278, 291
Build date1931–1933, 1935
Total produced70
Specifications
Configuration:
​
 • Whyte2-6-2T
 • UIC1′C1′ h2t
Gauge4 ft 8+1⁄2 in (1,435 mm) standard gauge
Leading dia.3 ft 2 in (0.965 m)
Driver dia.5 ft 8 in (1.727 m)
Trailing dia.3 ft 8 in (1.118 m)
Minimum curve6 chains (396 ft; 121 m) normal,
5 chains (330 ft; 101 m) slow
Length41 ft 0 in (12.50 m) over buffers
Width8 ft 11+1⁄4 in (2.724 m)
Height12 ft 7+5⁄8 in (3.851 m)
Axle load17 long tons 12 cwt (39,400 lb or 17.9 t)
19.7 short tons full
Adhesive weight52 long tons 13 cwt (117,900 lb or 53.5 t)
58.9 short tons full
Loco weight78 long tons 9 cwt (175,700 lb or 79.7 t)
87.9 short tons full
Fuel typeCoal
Water cap.2,000 imp gal (9,100 L; 2,400 US gal)
Firebox:​
 • Grate area20.35 sq ft (1.891 m2)
Boiler pressure225 lbf/in2 (1.55 MPa)
Heating surface:​
 • Firebox121.80 sq ft (11.316 m2)
 • Tubes1,145.00 sq ft (106.374 m2)
Superheater:
​
 • Type4-element or 6-element
 • Heating area4-element: 58.56 sq ft (5.440 m2),
6-element: 77.68 sq ft (7.217 m2)
CylindersTwo, outside
Cylinder size18 in × 30 in (457 mm × 762 mm)
Valve gearStephenson
Valve typepiston valves
Performance figures
Tractive effort27,340 lbf (121.61 kN)
Career
OperatorsGWR » BR
Class6100
Power classGWR: D
BR: 4MT
Numbers6100–6169
Axle load classGWR: Blue
Withdrawn1958–1965
DispositionOne preserved, remainder scrapped

The GWR 6100 Class is a class of 2-6-2T side tank steam locomotives.

History

[edit]
6165 at Reading with train of mineral wagons in May 1964

The class was designed by Charles Collett and introduced in 1931, and were a straightforward development of the earlier 5101 class (and for that matter the 1905 3100/5100 class). The main difference from their predecessors was an increased boiler pressure of 225 psi (1.55 MPa) with a consequent increase in tractive effort.[1]

There were seventy in the class, built in two batches in 1931–1933 and 1935. They were frequently referred to by trainspotters as 'Tanner One-ers' – being a reference to their '61xx' numbering sequence using colloquial terms for a sixpence and a penny.

The class was specifically built for commuter services in the London area where they replaced the ageing 2221 class on these services. They lasted to the end of steam on the Western Region of British Railways in 1965, never straying far from their home turf. Typical duties were Paddington to Aylesbury via High Wycombe, and from the same terminus to Oxford, Windsor, Reading and Basingstoke. They were mainly shedded at Old Oak Common, Southall, Slough, Reading and Aylesbury throughout their lives. In the early 1960s, the advent of the first generation diesel multiple units made them semi-redundant though generally far from worn out. Their last few years saw them on more menial duties, as in the adjacent photograph, until scrapping.[1]

Table of orders and numbers[2]
Year Quantity Lot No. Locomotive numbers Notes
1931 30 269 6100–6129
1932–33 30 278 6130–6159
1935 10 291 6160–6169

Preservation

[edit]
6106 at Didcot in 2023.

One locomotive, 6106, has survived into preservation, and is at Didcot Railway Centre, though currently non-operational.[3]

Model railways

[edit]

The erstwhile Kitmaster company produced an unpowered polystyrene injection moulded model kit for OO gauge. In late 1962, the Kitmaster brand was sold by its parent company (Rosebud Dolls) to Airfix, who transferred the moulding tools to their own factory; they re-introduced some of the former Kitmaster range, including this model. The tools were subsequently sold again to Dapol who have also produced this model.[4][page needed] Mainline Railways had OO gauge Class 6100 models in their catalogue in 1983, with models in GWR green and BR lined green.[5] Dapol announced in 2017 that it was producing a completely new OO gauge model of the class.[6] Hornby Railways is also retooling their OO gauge model of this class.[7]

For some time Graham Farish have produced a British N gauge model, it is dated compared with more modern models and its driving wheels are scale for the 3100 class, i.e. 5 feet 3 inches, but is still a reasonable representation which forms a good base to add detail to.[citation needed]

Triang also produced a powered model of 6157 in TT scale.[8]

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

GWR 6100 Class

View on Grokipedia
from Grokipedia
The GWR 6100 Class, also known as the "Large Prairie," is a class of 2-6-2T side-tank steam locomotives designed and built by the Great Western Railway (GWR) for suburban and passenger services, particularly in the London area. Introduced in 1931 as a development of the earlier 5101 Class, the 6100 Class addressed the growing demand for commuter traffic between the world wars, with 70 locomotives constructed at between 1931 and 1935. These engines featured a of two leading wheels, six driving wheels (5 ft 8 in diameter), and two trailing wheels, along with outside cylinders measuring 18 in × 30 in, a pressure of 225 psi, and a of 27,340 lbf, enabling reliable performance on routes up to 40 miles long. The class evolved from George Jackson Churchward's 1903 prototype (No. 99), incorporating , raised footplates, and curved bunkers for improved stability and capacity, with a service weight of approximately 175,728 lb, water capacity of 2,402 gallons, and coal capacity of 4 long tons (8,960 lb). Operationally, they handled local passenger and freight trains from northwest London to destinations like Aylesbury, Slough, Reading, and High Wycombe, as well as banking duties on inclines such as Sapperton, until diesel multiple units began displacing them in the late 1950s. Withdrawals commenced in 1958 with locomotive No. 6100, continuing progressively until the last example was retired in 1965 under British Railways Western Region management. One member of the class, No. 6106, has been preserved by the Great Western Society and has operated on heritage lines including the Gloucestershire & Warwickshire Railway, , and . As of 2025, it is on static display at .

Design and Specifications

Background and Development

The GWR 6100 Class emerged in the context of the Great Western Railway's expansion during the , which intensified suburban passenger traffic around , necessitating more powerful locomotives to handle heavier commuter trains on routes such as those from to and . These locomotives were developed to replace aging classes like the 517 Class 0-4-2T tanks from the and the 455 Class tender engines, which were increasingly inadequate for the growing demands of post-grouping era services. The design addressed the limitations of earlier prairie tanks by providing enhanced capacity while retaining the maneuverability essential for busy suburban operations. Under Chief Mechanical Engineer , the 6100 Class was conceived as a direct successor to the 5101 Class Large Prairies, which themselves evolved from Churchward's 1905 3100 Class through and renumbering in 1929. Key developmental decisions included enlarging the frame, , and side tanks of the 5101 design to accommodate increased loads, with the boiler pressure raised from 200 psi to 225 psi superheated for greater efficiency. This evolution maintained the 2-6-2T for balanced traction and stability on tight curves typical of London area lines, while also replacing the earlier 2221 Class County Tanks that had served since 1905. The first locomotive, No. 6100, entered service in April 1931, marking the introduction of a class built in two batches totaling 70 engines by 1935 at : 60 locomotives (Nos. 6100–6159) from 1931 to 1933 and 10 (Nos. 6160–6169) from 1934 to 1935. Specific design goals focused on improved power for rapid suburban acceleration, achieved through 5 ft 8 in driving wheels and a starting of 27,340 lbf, enabling effective handling of passenger services over routes up to approximately 40 miles long. Initially classified as GWR D and later BR 4MT (revised to 5MT in 1953), the class delivered an estimated 1,100 hp, prioritizing reliability and quick starts over sustained high-speed running.

Technical Details

The GWR 6100 Class locomotives featured a , with leading and trailing wheels of 3 ft 2 in and 3 ft 8 in respectively, and driving wheels measuring 5 ft 8 in in diameter. This configuration provided balanced stability for suburban and duties, building on the design of the earlier 5101 Class with enhancements for higher pressure operation. The class employed the GWR Standard No. 2 , a tapered design with a that contributed to efficient steam production. Operating at a of 225 lbf/in², the had a grate area of 20.4 sq ft, a firebox heating surface of 122 sq ft, and a total evaporative heating surface of 1,267 sq ft, including 1,145 sq ft from tubes; surface area measured 76 sq ft. Water was delivered via top-feed inlets to minimize foaming and maintain efficiency during frequent stops. Power was generated by two outside cylinders, each 18 in × 30 in, equipped with and piston valves for smooth operation. This arrangement yielded a of 27,340 lbf at 85% pressure, enabling rapid acceleration suited to dense traffic patterns. A screw-type reverser allowed precise control over cutoff settings, further aiding quick starts and stops. Key dimensions included an overall length of 41 ft 0 in and a wheelbase of 31 ft 9 in, with a rigid wheelbase of 14 ft 9 in between the driving axles. The locomotives weighed 78 long tons 9 cwt in working order, with an adhesive weight of approximately 52 long tons concentrated on the drivers. Side tanks held 2,000 imp gal of , while the bunker accommodated 4 long tons of coal, supporting extended runs without refueling.
SpecificationDetails
Wheel Arrangement2-6-2T
Driving Wheel Diameter5 ft 8 in
Cylinder Dimensions18 in × 30 in (outside)
Boiler Pressure225 lbf/in²
Tractive Effort27,340 lbf
Overall Length41 ft 0 in
Service Weight78 long tons 9 cwt
Water Capacity2,000 imp gal
Coal Capacity4 long tons

Construction

Production Batches

The GWR 6100 Class consisted of 70 locomotives, numbered 6100 to 6169, all constructed exclusively at the Great Western Railway's under the superintendence of Chief Mechanical Engineer . The majority of the class was produced in the first batch of 60 locomotives (6100–6159), built between April 1931 and April 1933 to Lots 269 and 278. This batch was assembled at a production rate of approximately two locomotives per month, reflecting the steady output capacity of during the early 1930s. A second batch of 10 locomotives (6160–6169) followed in October and November 1935 to Lot 291. These later engines maintained the core design of the class but benefited from accumulated manufacturing experience at , enabling a quicker completion rate for the smaller group.

Build Variations

The GWR 6100 Class locomotives displayed minor construction differences across their production, primarily to refine performance for suburban duties while maintaining overall . All locomotives in the class had a bunker capacity of 4 long tons (4,060 kg). Water fillers differed between early and later builds: screw-down type on 6100–6109, and lever type on 6110–6169. Sliding cab shutters were fitted as new on 6110–6169 and added to earlier locomotives from 1933. All examples were equipped with tripcock safety gear for compatibility with tracks. Following 1933, the final batch of 6160–6169, constructed in 1935, did not include significant changes to the fundamental or layout. Throughout the class, the core 2-6-2T remained unchanged, ensuring route compatibility and operational consistency. Locomotives were numbered sequentially from 6100 to 6169 upon completion, with no formal sub-classes designated and no renumbering implemented until the transition to British Railways ownership in 1948.

Operational History

GWR Service

The GWR 6100 Class locomotives were primarily deployed on London suburban commuter services, operating out of to destinations including , Windsor, Reading, , and . This configuration was well-suited to the dense, stop-start nature of commuter traffic, enabling quick turnarounds and frequent services on the and associated branches. Allocations for the class were concentrated at key depots to support these operations, with the majority based at shed near for mainline workings. Additional locomotives were stationed at for local services, while a smaller number operated from Reading for duties. This distribution ensured reliable coverage of the suburban network, with engines occasionally shifting between sheds as demand fluctuated. The 6100 Class demonstrated excellent performance in suburban roles, offering rapid acceleration to meet tight schedules on busy routes. They proved reliable in mixed traffic, handled typical loads with ease. During their peak era in the 1930s and 1940s, these locomotives played a vital role in the GWR's efficient suburban operations amid growing passenger volumes.

British Railways Era

Upon in , the GWR 6100 Class locomotives retained their original numbering as 6100–6169 and were allocated to the , where they continued in suburban passenger duties around . They were initially classified as BR Mixed Traffic 4MT but to 5MT in 1953 to reflect their capabilities in mixed-traffic roles. Postwar dieselization and the introduction of diesel multiple units gradually shifted the class from primary suburban services—such as to Reading, , and —to secondary mainline passenger workings, branch lines, and freight tasks including banking at Junction and the Sapperton incline. By the mid-1950s, allocations evolved from London-area sheds like , , and to more distant outposts, including Reading, , Tyseley, , and Worcester, as suburban electrification and DMUs encroached on their core territory. For instance, locomotive No. 6100 was last allocated to Reading, while No. 6101 ended at Tyseley and No. 6160 at . Withdrawals commenced in September 1958 with No. 6100, the first of the class to be taken out of service, amid economic pressures from rising diesel adoption on the Western Region. The process accelerated in the , with four withdrawn in 1960, twelve in 1962, and the majority in 1964–1965; the last survivors, including No. 6106, were retired in December 1965. All were scrapped, predominantly at , as they were displaced by diesel multiple units for passenger services and types like the BR Class 14 for lighter freight duties.

Preservation

The Preserved Locomotive

No. 6106 is the sole surviving member of the GWR 6100 Class, having been constructed at in May 1931 and withdrawn from service at depot in December 1965. Following withdrawal, No. 6106 was acquired in working order in 1966 by a member of the Great Western Society for preservation, initially stored at goods shed where it was steamed for special occasions. In October 1967, the locomotive was relocated to , becoming a key exhibit at the emerging under Great Western Society ownership, where it underwent periodic maintenance for boiler certificate renewals and served in operational roles on the site and other preserved lines. As of November 2025, No. 6106 remains on static display at following withdrawal from active service for a major overhaul, with its most recent work being a cosmetic restoration and repaint completed in 2019. No confirmed plans for return to steam have been announced.

Operational History in Preservation

Following its acquisition by a member of the Great Western Society in working order, No. 6106 was steamed at Taplow goods shed from 1966 until its relocation to Didcot Railway Centre in October 1967, where it entered regular service on demonstration and passenger trains. A light overhaul was completed at Didcot in 1972, allowing continued operation on the centre's demonstration services until the expiry of its initial boiler certificate in 1981. The locomotive remained in active use at Didcot for shuttles and events, subject to periodic maintenance for compliance with boiler certification requirements. It also appeared in films, including "The Bliss of Mrs Blossom." No. 6106 underwent several major overhauls to renew its ten-year ticket, addressing structural and mechanical wear from heritage operations. These works were essential for maintaining safety and reliability, involving inspections, reboring, and frame alignments at 's workshops. The locomotive made guest appearances on other heritage railways, including the Gloucestershire Warwickshire Railway in October 1990 and the in September 1991 and June 1993, where it hauled passenger trains and participated in special events. These outings highlighted its versatility beyond while adhering to route-specific operational limits. From the completion of its last overhaul until November 2020, No. 6106 remained operational at , primarily on short shuttles and select railtours, before withdrawal for its next major overhaul. During this period, it contributed to the centre's visitor experiences, including themed events and footplate rides. A cosmetic restoration in refreshed its external appearance in GWR green livery while in storage. Preservation operations faced ongoing challenges, particularly adapting to evolving safety regulations, such as the fitting of Train Protection and Warning System (TPWS) equipment in the to enable limited mainline compatibility. These modifications, along with rigorous boiler examinations and emissions controls, increased overhaul costs and complexity, influencing decisions on return-to-service timelines.

Model Railways

Commercial Models

Commercial ready-to-run (RTR) models of the GWR 6100 Class 'Large Prairie' 2-6-2T steam locomotives have been produced in several popular scales, primarily focusing on British outline modeling. These models emphasize historical accuracy in dimensions, bunker variations, and livery details, with options for both analog and digital control. In OO gauge (1:76 scale), Hornby Railways released updated tooling for the class in the late 2010s, including Era 2 models such as No. 6110 in GWR green livery, featuring DCC-ready sockets and NEM couplers for enhanced compatibility. Dapol announced new tooling in 2017, with first releases in 2023-2024 following production samples in October 2024, and a second production run announced in 2023 for delivery in 2025, offering improved accuracy for bunker shapes and chassis details across variants like the 6100–6169 series, available in GWR green and British Railways (BR) black liveries with optional sound functions and working headlamps in digital versions. For N gauge (1:148 scale), Graham Farish produced 6100 Class models using 1977 tooling, including No. 6100 in GWR green and variants in black, with examples still available second-hand; newer alternatives include Sonic Models, which entered the market in with an all-new tooling commissioned by Rails of Sheffield, providing detailed representations of both 5101 and 6100 subclasses in lined green and unlined black finishes, incorporating partial sprung suspension on pony trucks. In O gauge (1:43 scale), Heljan produced limited runs starting in 2018, such as No. 6110 in GWR green with 'Great Western' lettering, highlighting the class's larger capacity and side tank details through plastic body with metal parts and diecast construction, with options for 2-rail or 3-rail operation and integrated sound systems in select editions. These RTR models commonly include experimental lined liveries alongside standard GWR green and black schemes, with digital variants supporting synchronized sound, effects, and illuminated cab interiors to replicate the locomotive's operational characteristics.

Kits and Custom Builds

Modelers of the GWR 6100 Class, also known as the Large Prairie, have access to a variety of kit options for assembly in popular scales, emphasizing etched metal and plastic components for detailed construction. Etched kits, typically in or brass, provide high-fidelity representations suitable for OO, EM, and P4 gauges, with components including detailed chassis, tanks, and bodywork. In 4mm scale, Martin Finney offers etched brass body kits (reference L12) for the related 41xx-61xx classes, focusing on the body without a tender, allowing for customization of and cab details. Complementing these, South Eastern Finecast produces an etched chassis kit (F178) for the 61xx, compatible with OO and EM gauges, which includes frames, brake gear, and motion components but requires separate wheels, motor, and body. Wizard Models supplies etched chassis packs (LCP20) and frame sets (LF20) as replacements or bases for the 5100, 5101, 6100, and 8100 classes, featuring accurate scale dimensions, balance weights, and brake pull rods for enhanced running performance. These kits are particularly favored by GWR enthusiasts for their precision and adaptability to fine-scale standards. For injection-moulded options, the classic plastic kit originally produced by and Kitmaster in the 1960s–1980s—representing a 5101/61xx Large —remains available as a reissue from Dapol (C089) in . This unpainted kit requires assembly and is noted for its basic structure, often upgraded with aftermarket etched chassis or detailing parts to improve accuracy and realism, making it collectible among vintage modelers. In 7mm (O gauge) scale, etched brass kits are available from Martin Finney (L7/10) for 41xx/51xx/61xx variants, providing comprehensive body and chassis etches, and from Warren Shephard for 51xx/61xx models, both emphasizing detailed tank and cab assemblies for larger-scale builds. Custom builds extend these kits through modifications such as super-detailing with overlays for injectors, pipework, and sandboxes; applying techniques to depict BR-era wear using paints and powders; or converting gauges with replacement frames like those from Comet Models for EM or P4 compatibility. These options are common among dedicated GWR modelers seeking historical accuracy beyond standard kits.

References

  1. https://www.loco-info.com/view.aspx?id=15223&t=Type
  2. https://glostransporthistory.visit-gloucestershire.co.uk/gwr-large-prairie-tank-engines/
  3. https://www.keymodelworld.com/article/great-western-railway-61xx-2-6-2t-history
  4. https://preservedbritishsteamlocomotives.com/6106-2/
  5. http://www.greatwestern.org.uk/262_6100det.htm
  6. https://preservedbritishsteamlocomotives.com/6100-2-6-2t-gwr-collett-6100-6169-6106/
  7. http://www.gwr.org.uk/no-boilers.html
  8. https://www.docbrown.info/docspics/ArchiveSteam/loco06106.htm
  9. http://www.gwr.org.uk/no-prairies.html
  10. http://www.greatwestern.org.uk/m_in_262.htm
  11. https://www.therailwayhub.co.uk/4068/whats-in-the-shops-heljans-o-gauge-large-prairie-tank/
  12. https://www.rail-online.co.uk/p211980178/he89f40fd
  13. https://didcotrailwaycentre.org.uk/article.php/76/6106-61xx-class
  14. https://www.railwaymagazine.co.uk/27985/a-visit-to-didcot-railway-centre/
  15. https://gb.readly.com/magazines/steam-railway/2025-11-06/69055f63e96bfd9fb7d82d19
  16. https://didcotrailwaycentre.org.uk/article.php/420/going-loco-august-2020
  17. https://www.keymodelworld.com/article/all-new-hornby-gwr-prairie-2-6-2t-oo
  18. https://locomotive.fandom.com/wiki/GWR_6100_Class
  19. https://www.dapol.co.uk/blogs/news/oo-gauge-gwr-2-6-2-large-prairie-steam-locomotive-production-samples
  20. https://www.dapol.co.uk/blogs/news/second-production-run-of-dapols-oo-gauge-2-6-2-large-prairie-announced-with-decorated-sample
  21. https://www.hattons.co.uk/929882/graham_farish_1604_6100_class_61xx_2_6_2_prairie_tank_6100_in_gwr_green/stockdetail
  22. https://www.keymodelworld.com/article/sonic-models-gwr-large-prairie-n-gauge
  23. https://www.ngaugenews.com/post/review-sonic-models-n-gauge-gwr-5101-61xx-large-prairie
  24. https://www.hattons.co.uk/205822/heljan_class_61xx_large_prairie_2_6_2t_6110_in_gwr_green_with_great_western_lettering/stockdetail
  25. https://www.youtube.com/watch?v=ABsKiQK-xEM
  26. http://www.gwr.org.uk/kits4locos.html
  27. https://www.wizardmodels.ltd/shop/locomotive/lcp20/
  28. https://railsofsheffield.com/products/dapol-c089-2-6-2-gwr-prairie-tank-plastic-kit
  29. http://www.gwr.org.uk/kits7locos.html
  30. https://community.hornbyhobbies.com/forums/topic/15365-re-manufacturing-parts-no-longer-available/
Add your contribution
Related Hubs
User Avatar
No comments yet.