Hubbry Logo
Optare VersaOptare VersaMain
Open search
Optare Versa
Community hub
Optare Versa
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Optare Versa
Optare Versa
from Wikipedia

Optare Versa
Arriva Midlands Versa at Showbus Rally in 2009 (pre-facelift)
Overview
ManufacturerOptare
Production2007–2018
Body and chassis
Doors1 or 2
Floor typeLow floor (outside UK)
Low entry (inside UK)
Powertrain
EngineCummins ISBe
MAN
Mercedes-Benz OM904
Capacity36-57 seated
TransmissionAllison 2100
Dimensions
Length10,400 to 12,100 mm (34 ft 1 in to 39 ft 8 in)
Width2,510 mm (8 ft 3 in)
Height2,840 mm (9 ft 4 in)
Chronology
SuccessorSwitch E1

The Optare Versa is a low-floor midibus that was manufactured by Optare at its Sherburn-in-Elmet factory. In total 883 were produced between 2007 and 2018.[1]

Description

[edit]
First Manchester Optare Versa Hybrid in April 2013 (second facelift)

Optare designed the Versa to fill a gap in its bus product range between the larger Tempo full-size single-decker bus and the smaller Solo minibus. Some operators of the longest of Optare's minibus-derived Solo models commented that the 7,000 mm wheelbase was too long, reducing manoeuvrability, which resulted from the Solo's front axle being ahead of the passenger entrance. It was officially launched at the Euro Bus Expo 2006 at the National Exhibition Centre, Birmingham in November 2006, with the first order of 25 buses being placed by Stagecoach.[2][3][4]

The Versa, with its entrance ahead of the front axle, considerably reduces the wheelbase, to either 5,130 mm or 5,820 mm (depending upon whether the overall length is 10,300 mm or 11,000 mm respectively). It is designed to seat between 36 and 40 passengers. The Versa has a typical Optare design, with a swooping roof line, large glazed area and swept-back front which takes many of its styling cues from the Solo, but with a more modern, updated appearance.

Discontinuation

[edit]

Following the restructuring of Optare in November 2020 and the launch of Switch Mobility the Versa was dropped from Optare's line-up in favour of the Metrocity.[5][6][7] The last Versas were built in 2018. [1]

Hybrid electric version - Optare Versa Hybrid

[edit]

In 2010, a hybrid electric version was introduced with the first 68 ordered by Transport for Greater Manchester. Of these, 20 were introduced on the FirstBus operated Metroshuttle routes in November 2010, while others were operated by Maytree Travel.[8][9]

Electric version - Optare Versa EV

[edit]

In 2012, an electric version was introduced with Travel DeCourcey ordering three in 2010, entering service on the Coventry Park & Ride. The Park and Ride trend was continued with First York purchasing 12 for its York Park & Ride services between 2014 and 2015.[10][11][12] Transport for Greater Manchester introduced three on its Metroshuttle services.[13][14]

Operators

[edit]

United Kingdom

[edit]

The first Optare Versas entered service in October 2007 with Arriva Shires & Essex.[15] Arriva, FirstGroup, Go-Ahead Group, Rotala, Yorkshire Tiger, Stagecoach Group, Wellglade Group, Transdev Blazefield and Translink Northern Ireland (37 buses) have all been purchasers. It has been operated by Transport for London operators East London, London United, NSL Buses, Quality Line and Selkent.[1] The Versa has proved popular with independent operators - such as Fleet Buzz - particularly in East Anglia, in the North West of England and also in Wales.

Australasia

[edit]

In New Zealand Reesby Buses have purchased three Versas from the Optare.[16][17] They are joined by Ritchies Transport Holdings, who purchased 7 from Nottingham City Transport in England in late 2013.

India

[edit]

An electric Optare Versa was exhibited at the Bus and Special Vehicles Show in Delhi in 2015.[18]

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia
from Grokipedia
The Optare Versa was a low-floor single-deck manufactured by the British bus company Optare, launched on 10 November 2006 at the Euro Bus Expo in Birmingham. Designed to bridge the gap between Optare's smaller Solo and larger models, it was positioned as a competitor to vehicles like the and offered enhanced capacity while maintaining maneuverability for urban routes. Available in two lengths—10.4 m (with a 5.13 m wheelbase) and 11.1 m (with a 5.82 m wheelbase)—the Versa provided seating for up to 40 passengers in various configurations, emphasizing flexibility for operators. It featured proven components from Optare's existing lineup, including Smoothride air suspension for passenger comfort, a multiplexed electrical system for diagnostics, and a 200 L fuel tank (plus 20 L for selective catalytic reduction on compliant engines). Powertrain options included the Mercedes-Benz OM904LA (4.25 L, 115 kW, Euro 4 with SCR), Cummins ISBe (5.90 L, 150 kW, Euro 4 with SCR), and MAN D0834 (132 kW, Euro 4 with EGR), paired with an Allison 2100 series 5-speed automatic transmission. The Versa quickly gained traction with its debut securing a £9 million order for 100 units from , marking Optare's largest single-deck contract at the time and highlighting its revenue potential through high passenger capacity in a (around 7,820 kg). Optare also developed electric and hybrid variants, with the Versa EV introduced featuring a Magtec P144 motor (150 kW power, 2,380 Nm ), contributing to early adoption of zero-emission technology in the UK fleet market. Built at Optare's Sherburn-in-Elmet facility in , the model supported diverse operators, including FirstGroup's electric fleet in , where upgraded Versa EVs have demonstrated reliability with over one million collective kilometers traveled.

Development and Production

Launch and Design Origins

The Optare Versa made its public debut at the 2006 Euro Bus & Coach Expo held at the in Birmingham, , on 10 2006. This launch positioned the Versa as Optare's strategic response to growing market demand for a offering greater passenger capacity than the existing Solo , while avoiding the bulk of full-sized single-deckers. The event highlighted the Versa's role in filling a gap in Optare's lineup between the compact Solo and the larger , targeting operators seeking versatile vehicles for constrained urban operations. The design origins of the Versa stemmed from Optare's established low-floor chassis architecture, particularly an extension of the integral frame used in the Solo model, adapted to proportions of approximately 10.3 to 11 meters in length. This evolution maintained the Solo's emphasis on and lightweight construction—utilizing framing with panels—for enhanced fuel economy and reduced operational costs, while introducing a more conventional front-axle placement behind the entrance door to improve stability and passenger flow. Stylistically, the Versa adopted a modern aesthetic with a sweeping roofline, extensive glazing for natural light, and aerodynamic swept-back front, prioritizing both visual appeal and practicality in dense city environments. Initially marketed for urban and suburban routes where maneuverability was paramount, the Versa was engineered to accommodate 36 to 40 seated passengers, providing sufficient capacity for medium-demand services without requiring the infrastructure of double-deck buses. Early prototypes incorporated the ISBe six-cylinder turbo diesel engine, rated at 150 kW, to ensure reliable performance compliant with Euro 4 emissions standards. Production began in early 2007 at Optare's facility in Cross Gates, Leeds, with the first customer deliveries—primarily to operators like and —commencing in October 2007. Over time, the Versa evolved to include hybrid and battery-electric powertrain options, expanding its adaptability to low-emission requirements.

Manufacturing and Output

Production of the Optare Versa began at Optare's assembly plant in Cross Gates, , and transferred to the new facility in Sherburn-in-Elmet, , , in 2011, where the integral body and chassis were constructed through a streamlined process involving panel forming, , and integration of structural components to ensure low-floor accessibility and lightweight design. Production of the model spanned from 2007 to 2018, during which Optare produced a total of 883 units to meet demand from operators seeking efficient midibuses. Output reached its peak in the early , coinciding with significant orders for urban and rural services, with build variations including 10.4 m, 11.7 m, and 12.1 m lengths to accommodate different route requirements and passenger capacities. Key components were sourced from established suppliers, including Allison transmissions for smooth automatic shifting and engines from , , and to support diesel, hybrid, and later electric configurations. This enabled flexible production runs, with assembly emphasizing modularity for variants while maintaining high standards of durability and .

Design and Specifications

Bodywork and Dimensions

The Optare Versa employs an low-floor bodywork optimized for lightweight durability and accessibility. The frame consists of an all-welded heavy-duty box section made from and high-grade , treated with anti-rust cavity wax and Dinol underseal for resistance. Side panels utilize a rail section , while front and rear panels are modular fiberglass-reinforced (GRP) for straightforward customization and . This structure achieves a low kerb weight of 7,820 kg in the 11.7 m variant, supporting improved . Available in multiple lengths to suit urban and suburban routes, the Versa measures 9.7 m, 10.4 m, or 11.1 m for standard models—with corresponding wheelbases of 5.13 m for the 10.4 m variant and 5.82 m for the 11.1 m variant—and extends to 11.7 m and 12.1 m for higher-capacity configurations. The body width is 2,506 mm, enabling maneuverability in narrow streets while providing ample interior space. The low-floor design maintains a height of approximately 2,840 mm, with a standard entry step height of 318 mm that kneels to 245 mm for enhanced step-free access. Exterior styling emphasizes aerodynamics and passenger comfort, featuring a swept-back curvaceous front profile, large one-piece gasket-glazed windscreen, and shaped quarter windows to minimize drag. Tinted, curved single-glazed saloon windows are bonded directly to the frame, with options for full-height glazing to improve natural light. Modular panels and LED lighting units allow operators to tailor the appearance and facilitate repairs. The underlying chassis draws from Optare's proprietary low-floor platform, incorporating Dana axles and for stability and ride quality. The front setup includes two air bags with leading taper leaf springs and a , while the rear employs four air bags on a parallel linkage with an . This configuration supports the bus's low entry and overall lightweight profile without compromising structural integrity.
Variant LengthWheelbaseKerb Weight (approx.)
9.7 mN/ANot specified
10.4 m5.13 mNot specified
11.1 m5.82 mNot specified
11.7 mN/A7,820 kg
12.1 mN/ANot specified

Interior Features and Capacity

The Optare Versa features a low-floor throughout, facilitating easy access for passengers and compliance with accessibility standards such as those under the Disability Discrimination Act (DDA). This design includes a flat floor level from the entrance to the rear, supported by that allows the vehicle to kneel, reducing the entry step height to approximately 245 mm. Seating capacity varies by vehicle length and layout, typically accommodating 36 to 40 passengers in standard configurations, with options for up to 44 seats in the 11.7-meter variant. Passenger seats, such as the Esteban Civic V2 or Phoenix semi high-back models, include three-point seat belts, ABS backs, and integrated grab handles for enhanced safety and comfort; these can be upholstered in customizable moquette or fabric options. Tip-up seats are available in designated areas, allowing flexibility for additional standing room or storage. Accessibility is prioritized with up to two bays, each equipped with backrests, gangway stanchions, and for maneuvering; access is provided via a manual fold-out ramp at the rear or side door. The interior includes 35 mm diameter track-mounted handrails in color-coordinated finishes, heavy-duty slip-resistant flooring with yellow step nosings, and ample headroom for seated and standing passengers. Comfort amenities encompass a recirculating warm air at the front and rear, hopper windows for natural ventilation, and optional air conditioning units. Modular saloon provides continuous dual-level illumination, with later models incorporating LED options for energy efficiency. Driver are addressed through an adjustable Chapman MK250 seat with lumbar support and headrest, alongside a full protective screen for the cab area. Additional features in select builds include optional passenger information systems for audio-visual announcements and USB charging points at seats, enhancing connectivity for up to 50 total passengers including standees in high-capacity layouts.

Powertrain Variants

Conventional Diesel Configuration

The conventional diesel configuration of the Optare Versa utilized a range of inline diesel engines paired with an , emphasizing reliability and compliance with 5 and 6 emission standards. The standard included options such as the ISBe, a turbocharged six-cylinder with a 6.7-liter displacement, delivering between 150 kW (201 hp) and higher outputs up to approximately 200 hp, depending on the variant. Alternative engines comprised the OM904LA, a four-cylinder with a 4.25-liter displacement rated at 115 kW (154 hp), and the MAN D0834, a six-cylinder unit with a 4.6-liter displacement offering 132 kW (177 hp) in bus applications. All engines incorporated advanced exhaust after-treatment systems, including (SCR) technology using AdBlue in later 5 and 6 models, to minimize emissions while maintaining performance. The drivetrain was completed by the Allison 2100 series five-speed automatic transmission as standard, providing smooth shifting and efficient power delivery suitable for urban and intercity routes. This setup contributed to the Versa's operational efficiency, with a top speed governed to 50-60 mph (80-97 km/h) for safety and regulatory compliance in passenger service. Fuel economy reached up to 8-10 mpg (29-35 L/100 km) in typical urban cycles, aided by the bus's lightweight integral body construction, which reduced overall vehicle mass and improved payload efficiency. The diesel powertrain's design prioritized low curb weight—often under 8 tonnes for longer variants—to maximize revenue per kilogram through higher passenger capacities relative to gross vehicle weight, enhancing economic viability for operators. This configuration served as the foundational platform for subsequent hybrid adaptations, integrating the with electric components for improved emissions in select models.

Hybrid Electric Configuration

The Optare Versa hybrid electric variant was introduced in 2010 at the Euro Bus Expo, marking Optare's entry into diesel-electric hybrid technology for its midibus lineup. This configuration utilized a parallel hybrid system developed in collaboration with ISE Corporation for energy storage and Siemens for the electric drive components, aimed at enhancing efficiency in urban operations. The first major order came from Transport for Greater Manchester in May 2010 for 68 hybrid Versas as part of a broader £13 million Eco Drive program, with deliveries commencing in 2011 to operators including First Greater Manchester. The hybrid powertrain integrated a —typically the OM904LA four-cylinder unit rated at 130 kW (174 hp) and compliant with Euro 5 emissions standards—with twin electric motors delivering a combined maximum output of approximately 134 kW (180 hp) and 320 Nm of torque. These motors connected to a Flender gearbox the rear axle, while the powered an onboard generator without a direct mechanical link to the wheels. relied on roof-mounted ISE ultra-capacitors with a capacity of around 0.5 kWh at 700 V, which supported to recapture energy during deceleration and enabled short periods of electric-only in low-speed scenarios. The system emphasized rapid charge-discharge cycles suited to stop-start , with total effective power estimated at 200-250 hp when combining diesel and electric contributions. This setup delivered notable efficiency gains, achieving fuel consumption reductions of up to 33% compared to equivalent conventional diesel Versas, particularly in urban environments with frequent braking and . Corresponding CO2 emissions cuts reached approximately 25-30%, alongside lower levels and smoother operation due to the electric traction. These benefits were validated through Low Carbon Emission Bus certification trials in , supporting deployment in emission-sensitive areas. Production of the hybrid Versa continued until 2018, with key fleets including a 2012 order of 39 units for TfGM's Yellow School Bus scheme, operated across multiple providers in .

Battery Electric Configuration

The battery electric configuration of the Optare Versa, designated as the Versa EV, was introduced in 2012 as Optare's full-sized zero-emission offering, capable of accommodating over 50 passengers. Developed from the smaller Solo EV platform launched in 2010, it featured a Magtec P144 permanent electric delivering 150 kW of peak power and 2,380 Nm of at 2,650 rpm, enabling responsive performance in urban environments. The was paired with lithium iron (LiFeMgPO4) batteries arranged in two packs totaling approximately 92 kWh capacity, comprising 52 modules (two packs of 26 in series, paralleled) each rated at 12.8 V and 138 Ah, providing a nominal 333 V system with 276 Ah total capacity, positioned under the floor to maintain low-floor . This setup marked an early of advanced battery chemistry for commercial bus applications, emphasizing and longevity over higher energy density alternatives. The Versa EV achieved a practical range of approximately 110-150 km (68-93 miles) on a single charge under typical operating conditions, supported by regenerative braking that recovered energy during frequent stops common in city routes. Charging was conducted via standard conductive plugs, with options for overnight depot charging (around 6 hours for full capacity) or shorter opportunity charging at terminals (about 2 hours for partial replenishment), allowing daily service cycles of up to 100 km without mid-day interruptions. These capabilities aligned with emerging zero-emission bus (ZEB) standards in the UK, delivering instant torque for quick acceleration from stops and eliminating tailpipe emissions to reduce urban air pollution. The vehicle's top speed was electronically limited to 95 km/h (59 mph), prioritizing efficiency over highway performance. Production of the Versa EV remained limited, reflecting the nascent state of battery electric bus technology and high costs in the early 2010s, with key deployments including 10 units for starting in June 2012 and 12 for First York by 2014. By 2018, total output was estimated at around 30 to 50 units across operators, focusing on trial and park-and-ride services to demonstrate viability. Battery packs incorporated basic management through pack design and ventilation to ensure longevity, with maintenance-free operation contributing to lower whole-life costs compared to diesel equivalents. Early adopters reported reliable performance in 15-hour daily duties, underscoring the configuration's role as a pioneer in transitioning to .

Operators and Deployment

United Kingdom Usage

The Optare Versa has seen extensive deployment across the , with major bus operators incorporating over 700 units into their fleets for urban and suburban services. maintains more than 50 Versas in its North West operations, alongside additional examples in the division for local routes. has integrated Versas into its and fleets, including a notable 12-unit battery-electric batch in dedicated to park-and-ride operations. utilizes the model across various regions, stemming from an initial 2006 order of 100 vehicles for diverse applications. The , particularly through , operates a substantial number of Versas in the North East, often on high-frequency urban corridors, though some batches such as the Berries-branded Versas were withdrawn in early 2025. Smaller operators, such as TM Travel in , employ Versas for community-focused services. Primarily suited to urban environments, the Versa supports short-to-medium routes with frequent stops, exemplified by First York's electric models on park-and-ride links connecting suburban sites to the city center, with the 12-unit fleet fully operational following repowers. Hybrid variants have been prioritized in low-emission zones, including Transport for Greater 's (TfGM) deployment of 39 units for school transport contracts across multiple operators. Battery-electric trials began as early as , with Optare's fast-charging technology recognized for excellence and tested in and to evaluate zero-emission performance in congested areas. Operators frequently apply custom liveries to Versas for route branding, such as the scheme on airport shuttles or Go North East's distinctive regional designs. Post-2015 adaptations include Euro 6 retrofits to meet stricter emissions standards, notably TfGM's program upgrading at least 52 hybrid Versas with systems for continued compliance in clean air zones. These modifications ensure ongoing viability in regulated urban networks while preserving the vehicle's lightweight efficiency.

International Usage

The Optare Versa has achieved modest adoption outside the , primarily in right-hand drive markets through exports facilitated by Optare's parent company, . In , represents the most significant deployment, with over 10 units entering service. Reesby Buses, based in , acquired an 11.7-meter Optare Versa in 2013 for use on regional routes around , where its lightweight design and efficient ISBe engine were projected to deliver substantial fuel savings compared to heavier competitors. Ritchies Transport Holdings, which absorbed Reesby's operations, added seven Versa midibuses to its fleet, including models like RT154 (chassis JBW458), deployed on services such as those from the depot in ; these vehicles supported rural and suburban connectivity with capacities for up to 44 passengers. In , Optare established a dedicated distributor in 2017 via Bus Corp , but Versa uptake remained limited to evaluation trials by local operators, with no large-scale orders reported. In , the Versa garnered attention through exhibitions but saw no substantial commercial sales. unveiled the battery-electric Versa EV variant at the Bus & Special Vehicles Show 2015 in , highlighting its zero-emission capabilities, 180 km range, and suitability for urban feeder services with a 45-passenger capacity. Plans for local assembly and market entry were announced alongside the display, positioning the Versa as a potential influence on India's emerging hybrid and segment, though production focused on diesel and CNG alternatives instead. Exports to other regions have been minimal, with fewer than 100 Versa units shipped internationally overall, concentrated in for demonstration purposes rather than fleet operations. Adaptations for export included standard right-hand drive configurations for markets like and , ensuring compatibility with local driving standards.

Discontinuation and Legacy

Production Cessation

Production of the Optare Versa came to an end in 2018 after a 11-year run that saw 883 units manufactured at the company's Sherburn-in-Elmet facility. This cessation aligned with Optare's strategic pivot toward larger vehicle platforms, particularly the MetroCity, which offered greater capacity and was better suited to urban route demands. The final diesel and hybrid configurations were completed and delivered that year, marking the close of assembly for these powertrain variants. The decision was set against broader corporate transformations at Optare. Following its acquisition by Indian manufacturer in 2010—initially through a 26% stake that progressively increased to 99% by 2018—the company underwent significant restructuring to enhance its global footprint and technological capabilities. In November 2020, Optare was rebranded as under Ashok Leyland's ownership, emphasizing electric and new mobility solutions; as part of this shift, the Versa was formally dropped from the product lineup. Key contributing factors to the Versa's discontinuation included the accelerating market transition to zero-emission , driven by stringent emissions regulations and operator preferences for sustainable fleets. Heightened competition from fully integral electric buses, such as those produced by BYD, further pressured traditional body-on-chassis models like the Versa, which struggled to match the efficiency and integration of purpose-built EVs. No new battery electric Versa units were built after 2016, with earlier EV examples limited to demonstration and small fleet deployments.

Post-Production Developments

In 2024, Equipmake Holdings completed a significant retrofit project on 12 first-generation Optare Versa EV buses operated by First York, repowering them with the company's Zero Emission Drivetrain (ZED) technology. This upgrade replaced the original with advanced components, including a higher-capacity and a patented system designed for efficiency in varied conditions. The result is a guaranteed operational range of 150 miles per charge across all weather scenarios, substantially extending the vehicles' usability compared to their pre-upgrade performance. These repowered Versa buses entered full passenger service in April 2024, primarily on York's routes, where they form part of the city's largest all-electric operation and help reduce urban emissions. The project demonstrates a practical approach to lifecycle extension for early electric buses, avoiding premature scrappage while aligning with decarbonization initiatives. The Optare Versa's legacy persists through widespread continued service in the , supported by such repowering efforts and engine maintenance programs that prolong operational life. Numerous units remain active with operators like First and , including 2016–2017 models on regional Flyer services as late as 2025. This ongoing deployment underscores the model's durability and adaptability in networks. The Versa's early contributions to electric bus technology have shaped Switch Mobility's (formerly Optare) EV portfolio, informing the design of successor low-floor single-deck models focused on urban zero-emission applications. Recent involvement in zero-emission bus trials, such as the First York repowers, highlights its role in evaluating retrofit viability for fleet transitions. Preservation efforts have also emerged, with at least one example entering enthusiast collections by late to document the model's historical significance. Looking ahead to 2025 and beyond, potential for additional electrification retrofit kits remains strong amid the UK's net-zero emissions targets and proposals to end sales of new non-zero-emission buses between 2030 and 2035. These initiatives encourage further upgrades to existing Versa fleets, promoting cost-effective paths to compliance with decarbonization mandates.

References

Add your contribution
Related Hubs
User Avatar
No comments yet.