Hubbry Logo
ReihenwerferReihenwerferMain
Open search
Reihenwerfer
Community hub
Reihenwerfer
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Reihenwerfer
Reihenwerfer
Reihenwerfer
View on Wikipedia
from Wikipedia

The Reihenwerfer or Mittlerer Schützenpanzerwagen S303(f) mit Reihenwerfer was a self-propelled barrage mortar used by the Wehrmacht during World War II.

Key Information

History

[edit]

After the Fall of France in 1940 large amounts of French military hardware fell into German hands. Two systems that were captured in sizable numbers were the SOMUA MCL half-track artillery tractor and the 81 mm Brandt Mle 27/31 mortar. Since the Germans were short of resources both were issued to German units. The SOMUA MCL was given the German designation S303(f) and the mle 27/31 was given the designation GrW 278(f).

The Reihenwerfer consisted of 20 GrW 278(f) barrels in two rows of 10 which were mounted on a common framework that was attached to a base mounted on the back of an armored S303(f) chassis. The mortars and half-tracks were converted by Major Alfred Becker's workshop (Baukommando Becker) in Paris. All 20 barrels could be traversed 360° and elevated together from +35° to +90°, with the outer barrels pointing slightly outwards to increase the spread of the barrage. The vehicle carried 90 rounds of ready use ammunition and each barrel held a single round at the top of the tube until fired by pulling a lanyard. The round then slid down the tube until it hit a firing pin which launched it. In action, all 20 barrels were fired in rapid succession, but not simultaneously to saturate the target area. The Reihenwerfer was deployed by German units in Northern France during the Normandy landings.[2]

[edit]
  • A crew loading a Reihenwerfer near Riva-Bella (Sword Beach), Atlantic coast, Northern France on 30 May 1944.[1]
    A crew loading a Reihenwerfer near Riva-Bella (Sword Beach), Atlantic coast, Northern France on 30 May 1944.[1]

Notes

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Reihenwerfer

View on Grokipedia
from Grokipedia
The Reihenwerfer, formally designated as the Mittlerer Schützenpanzerwagen S307(f) mit Reihenwerfer (lighter variant) or S303(f) (heavier variant), was a self-propelled barrage mortar employed by the during , consisting of multiple tubes mounted on captured French artillery tractor chassis to provide mobile area saturation fire support. Developed in 1943 by Major Alfred Becker's Baukommando Becker unit in occupied , the vehicles were part of broader efforts to repurpose hundreds of captured French equipment amid resource shortages; specifically, approximately 36 lighter S307(f) and 16 heavier S303(f) were transformed into Reihenwerfer. The featured an open-topped mounting 16 captured French 81 mm GrW 278(f) mortar barrels—arranged in two rows of eight—for the lighter variant, or 20 barrels for the heavier; the retained its original 4-cylinder gasoline engine producing 55-60 hp for moderate mobility. These vehicles were primarily assigned to the Schnelle Brigade West (Rapid Brigade West) for coastal defense and later integrated into the 21. Panzer-Division, seeing limited but notable action during the Normandy Campaign in , including defensive operations against Allied landings. Despite their innovative use of Beutepanzer (captured armor), the Reihenwerfers suffered from reliability issues inherent to the aging French chassis, thin armor vulnerable to , and the inaccuracy of massed mortar salvos at longer ranges, rendering them more suitable for close-support roles than sustained artillery duels. Only a handful survive today, such as one lighter variant in a private collection in recovered from near , underscoring their rarity and the broader context of German improvisation in the war's later stages.

Development and Production

Historical Context

Following the Fall of France in June 1940, German forces occupied the country and captured thousands of French military vehicles, including SOMUA half-tracks such as the MCL and MCG models, which were repurposed to supplement the Wehrmacht's equipment needs. These captures provided a substantial stockpile of chassis and components amid the rapid expansion of German operations across . By 1943-1944, severe shortages in German artillery production emerged due to intensified Allied bombing campaigns, such as Operation Pointblank, which targeted industrial facilities and reduced explosive output from 60,000 tons in early 1944 to just 20,000 tons by September. Resource limitations, including disrupted access to raw materials like oil from and , further hampered manufacturing, forcing the to ration ammunition and fuel while shifting many units to less efficient horse-drawn transport. These constraints underscored the vulnerability of Germany's industrial base as Allied pressure mounted in preparation for an invasion of . Major , an officer and engineer, played a pivotal role in addressing these deficiencies through his Baukommando Becker unit, established in to convert captured French equipment into improvised self-propelled guns. Operating from facilities like the repurposed Hotchkiss plant on the city's outskirts, Becker's team focused on rapid modifications to bolster defensive capabilities. The broader concept of "Beutepanzer," or captured tanks, exemplified this strategy of low-cost improvisations, driven by Adolf Hitler's directives to maximize enemy matériel for frontline use. As the anticipated Allied landings in Normandy loomed in 1944, such efforts aimed to rapidly equip under-resourced divisions, like the 21st Panzer Division, with mobile artillery to counter the invasion threat.

Conversion and Manufacturing

The conversion of captured French vehicles into Reihenwerfer systems was primarily carried out by Baukommando Becker, a specialized unit led by Major , which established workshops in occupied starting in 1943. These facilities, including repurposed factories such as the Hotchkiss plant on the outskirts of and additional sites at , focused on adapting chassis designated S303(f) (MCL model) and S307(f) (MCG model) for artillery roles. Initial conversions began in late 1943, with assembly accelerating through early 1944 amid preparations for anticipated Allied operations in ; by May 1944, the first units were ready for deployment. The process involved mounting arrays of captured French Brandt Mle 27/31 81 mm mortars—redesignated GrW 278(f) by the Germans—in row configurations (typically 16 or 20 barrels across two rows) on a reinforced framework affixed to the vehicle's rear platform. This integration allowed for salvo fire capabilities, though the mortars retained their original French design for simplicity in adaptation. Production remained limited, with an estimated total of 12-20 units across variants, constrained by the scarcity of serviceable captured chassis and compatible parts from French stocks depleted by prior campaigns. Manufacturing challenges included the inconsistent quality of salvaged components, such as worn mortar tubes and mismatched vehicle frames, compounded by rushed assembly under intense wartime pressures and Allied bombing threats to French industrial sites. These factors resulted in improvised solutions, like basic welding and minimal armor additions, prioritizing speed over durability.

Design Features

Chassis and Mobility

The Reihenwerfer multiple rocket launchers were mounted on captured French chassis, with the heavier SOMUA MCL serving as the base for the S303(f) variant and the lighter for the S307(f) variant. Both vehicles employed a hybrid wheeled-tracked configuration typical of the Kégresse design, featuring steerable front wheels for maneuverability on roads and rubberized rear tracks for enhanced traction and cross-country mobility. This setup provided the Reihenwerfer with reasonable off-road capabilities suitable for repositioning in fluid battlefield conditions, particularly in defensive operations. The original French engines were retained with minimal alterations to the drivetrain, preserving the half-track's inherent versatility. The SOMUA MCL was powered by a four-cylinder SOMUA M22/M23 engine producing 80–90 hp at 2,000 rpm, while the SOMUA MCG used a similar four-cylinder petrol unit delivering 55–60 hp. These powerplants enabled a maximum road speed of approximately 31 km/h for both types, with off-road speeds reduced to around 20 km/h depending on terrain. The five-speed transmission and front-wheel contributed to reliable handling, though the added weight of the launcher systems slightly compromised and hill-climbing ability compared to the stock French tractors. Fuel were straightforward, with a standard 80-liter providing an operational range of about 170–180 km on roads, sufficient for the Reihenwerfer's in supporting divisions through quick salvoes followed by relocation to avoid . German conversions involved only basic reinforcements to the frame to accommodate the launcher mounts without altering the suspension or fuel systems, ensuring the vehicles remained logistically compatible with captured French spares where available. This emphasis on rapid mobility allowed Reihenwerfer units to execute effectively in .

Armament and Firing Mechanism

The Reihenwerfer featured a multiple mortar array consisting of captured French 81 mm tubes, designated GrW 278(f) in German service, arranged in parallel rows on a rear-mounted platform to enable barrage fire for area saturation. The heavier S303(f) variant mounted 20 tubes in two tiers of 10 each, while the lighter S307(f) used 16 tubes in two rows of eight. This configuration allowed for concentrated support, with the tubes preloaded and fixed in position relative to one another for coordinated delivery. The firing mechanism used lanyards to initiate the drop-fire of the tubes in rapid sequence, launching all rounds within seconds to simulate a rolling barrage and overwhelm targets with high-explosive impacts over a defined area. All barrels were elevated and traversed as a single unit via a turntable mounting, providing 360° traverse for flexible targeting and an elevation range of +35° to +90° to adjust for varying distances. This setup prioritized volume of fire over precision, with the vehicle positioned to align the array before initiating the salvo. Ammunition consisted primarily of high-explosive shells compatible with the Brandt system, including lighter variants weighing 3.25 kg with a maximum range of approximately 2.8 km, and heavier 6.5 kg rounds limited to about 1.2 km for greater destructive effect at closer ranges. Each vehicle carried 90 rounds of ready-use , sufficient for four to five full barrages depending on the loadout mix. These shells were muzzle-loaded into the tubes, relying on the mortar's design for high-angle trajectories. Reloading was performed manually by the from the vehicle's rear, requiring the removal and insertion of individual shells into each tube, a labor-intensive process that typically took 5-10 minutes to prepare a full salvo under conditions. This limitation restricted the Reihenwerfer to intermittent use, emphasizing its role in surprise or rather than sustained bombardment.

Technical Specifications

Dimensions and Performance

The Reihenwerfer vehicles were based on captured French , with the primary S307(f) variant using the measuring 5.30 meters in length, 2.17 meters in width, and 2.85 meters in height ( only; added height for mortar array). The S303(f) variant on the heavier SOMUA MCL had dimensions of approximately 5.2 meters in length, 2.3 meters in width, and 2.9 meters in height. In combat-loaded condition, these vehicles weighed approximately 8,000 kilograms, providing stability for firing operations but limiting off-road agility. Performance characteristics included a maximum road speed of 31 km/h on established routes, while cross-country speeds ranged from 15 to 20 km/h depending on terrain and load. Fuel efficiency was approximately 10-15 km per 10 liters with the 55-60 hp engine. The turning radius was about 8 meters, adequate for positioning in defensive roles.

Protection and Crew Accommodations

The Reihenwerfer retained thin steel armor from the chassis, typically 6-15 mm thick on the front and sides, sufficient against small-arms fire and shrapnel but vulnerable to anti-tank weapons. The vehicle accommodated a of five to six: a driver, commander, and loaders/gunners for the mortar tubes. The open-topped design exposed the crew to , requiring quick repositioning tactics. The internal layout featured the driver's compartment forward with vision slits, mortar controls amidships, and rear ammunition storage for efficient reloading of the tube array. No enclosed turret was present, resulting in a functional but cramped space. Some conversions included forward NbK 38 launchers and a basic radio for coordination, though were limited to vision ports. These features highlighted the vehicle's role as a mobile platform reliant on mobility over protection.

Operational History

Unit Organization and Deployment

The Reihenwerfer were integrated into the 21st Panzer Division as part of the Panzer-Artillerie-Regiment 155, specifically forming the 10. (Werfer) Batterie, which functioned as a divisional reserve under direct command. These units were also assigned to other Western Front formations to bolster artillery support in defensive positions. Unit organization followed Kriegsstärkenachweisung (K.St.N.) tables for self-propelled artillery, structuring batteries with 6-12 Reihenwerfer vehicles each, augmented by ammunition supply trucks for reloading operations and spotter teams equipped with forward observation vehicles like the Panzerbeobachtungswagen Lorraine to direct fire. In the 21st Panzer Division, the 10. Batterie likely comprised around 4-6 Reihenwerfer vehicles, distributed across the artillery regiment and attached to panzergrenadier battalions for close support, reflecting the improvised nature of the division's equipment; the exact number remains uncertain due to limited records. Deployment to the theater was expedited in May 1944, with Reihenwerfer batteries rushed forward and emplaced in coastal defenses around and to counter anticipated Allied landings, aligning with the 21st Panzer Division's repositioning from . Maintenance logistics depended heavily on scavenged captured French components, as the vehicles were built on and Unic half-track chassis with limited German-standard spares available, complicating field repairs amid the Western Front's supply strains. Crew training was curtailed to 1-2 weeks in many cases, contributing to the relative inexperience of operators drawn from recent replacements.

Combat Engagements in Normandy

The Reihenwerfer entered combat during the initial phase of the campaign as part of the 21st Panzer Division's counterattacks against Allied landings near on June 6, 1944. Positioned close to the invasion area prior to D-Day, these self-propelled barrage mortars provided to support German efforts to disrupt British forces establishing beachheads at Riva-Bella and Lion-sur-Mer. The division's artillery elements, including the Reihenwerfer batteries, contributed to the localized counteroffensives that temporarily halted Allied advances toward , though overall German responses were fragmented due to command delays. In the subsequent defense of Caen from June to July 1944, Reihenwerfer units played a role in several key engagements, notably supporting 21st Panzer Division positions against Canadian and British assaults. On June 7, elements of the North Nova Scotia Highlanders encountered fierce resistance at Buron, where a sixteen-barreled Reihenwerfer—identified as providing rocket-like barrage fire—was destroyed by Captain Errol Gray's carrier section during an advance that captured the village by midday. Later, on 24 July 1944, British 152nd Infantry Brigade troops from the 2nd Seaforth Highlanders were subjected to mortar barrages from a Reihenwerfer near their positions east of Caen, highlighting its use in static defensive roles amid the ongoing Battle for Caen. These actions demonstrated the weapon's capacity to deliver rapid, area-denial fire that temporarily disrupted infantry movements, but the vehicles proved highly vulnerable to Allied naval gunfire and close air support, often forcing repositioning under intense pressure. The Reihenwerfer's high-volume fire output—capable of saturating targets with up to 20 81mm mortar rounds in a single salvo—proved effective for area suppression and breaking up infantry assaults in the bocage terrain around Caen, contributing to German defensive stands despite limited numbers. However, by August 1944, most Reihenwerfer units attached to the 21st Panzer Division were destroyed or abandoned during the Allied encirclement at the Falaise Pocket, where the division suffered catastrophic losses exceeding 80% of its armor and artillery assets amid relentless air and ground attacks. The specialized vehicles suffered high attrition, consistent with the overall destruction of German artillery in the campaign. Tactically, the Reihenwerfer excelled in prepared defensive positions for delivering sudden, psychological barrages that pinned enemy advances, but its limited mobility on the chassis exposed it during fluid retreats, leading to high vulnerability in the campaign's later phases.

Variants

S303(f) Model

The S303(f) model represented the heavier variant of the Reihenwerfer, utilizing the MCL chassis designated as the Mittlerer Schützenpanzerwagen S303(f). This configuration mounted 20 tubes of captured French 81 mm mortars—redesignated GrW 278(f)—arranged in two parallel rows of 10 tubes each on a rotating platform at the vehicle's rear, enabling concentrated barrage fire. Production involved the conversion of approximately 16 units in early 1944, overseen by Major Alfred Becker's Baukommando Becker unit, with the majority allocated to equip elements of the 21st Panzer Division. These conversions adapted existing captured French chassis by adding armored casemates and the multi-tube launcher assembly, prioritizing rapid field modification over new manufacturing. The MCL , originally an , conferred a slightly higher profile than lighter half-tracks but offered superior stability to accommodate the increased weight and of the 20-tube configuration during full-salvo launches. This design choice enhanced the platform's ability to handle heavier ammunition loads for sustained support, distinguishing it from variants on smaller . Operationally, the majority of S303(f) models saw deployment with the 21st Panzer Division during the Normandy campaign in June 1944, providing mobile artillery support in defensive counterattacks against Allied forces.

S307(f) Model

The S307(f) model, officially designated as the Leichter Reihenwerfer auf Fahrgestell S307(f), represented a lighter variant of the Reihenwerfer system, mounting 16 captured French 81 mm Brandt mle 27/31 mortars (redesignated GrW 278(f)) arranged in two rows of eight tubes on a rotatable platform at the rear of the vehicle. This configuration allowed for a 360-degree traverse, enabling rapid barrage fire similar to its counterpart but with reduced salvo capacity due to the fewer tubes. The mounting framework was fixed to the chassis bed, with the tubes elevated for high-angle fire, prioritizing mobility over maximum payload in design. Developed under Major Alfred Becker's conversion program using captured French equipment, the S307(f) utilized the half-track chassis, which was lighter and more compact than the SOMUA MCL-based S303(f), weighing approximately 6.5 tons unloaded and offering improved off-road performance through its 4-cylinder 103 engine producing 55-60 hp. This chassis choice enhanced maneuverability on varied but limited the overall firepower volume compared to heavier variants. Armoring was added to the cab and sides for crew protection, accommodating a driver and three loaders, with ammunition stored in the rear compartment. Production of the S307(f) began in late 1943 or early 1944 at Becker's workshops in France, with approximately 36 units completed. Production figures are estimates and vary in sources, reflecting the improvised nature of the conversions. Like the S303(f), the S307(f) models were deployed with units such as the 21st Panzer Division during the Normandy campaign in 1944, providing mobile artillery support.

References

  1. https://tanks-encyclopedia.com/ww2/germany/panzerjager-fahrzeug-mit-75-cm-pak-40-auf-fahrgestell-s-307-f/
  2. https://forum.axishistory.com/viewtopic.php?t=79048&start=15
  3. https://www.tumblr.com/mav-it/114581498680/reihenwerfer-somua-s307f-s303f-baustab
  4. https://www.flamesofwar.com/hobby.aspx?art_id=6841
  5. http://the.shadock.free.fr/Surviving_French_Armoured_Vehicles.pdf
  6. https://www.warhistoryonline.com/world-war-ii/beutepanzer-how-nazi-germany-relied-on-captured-military-vehicles.html
  7. https://apps.dtic.mil/sti/tr/pdf/ADA384410.pdf
  8. https://warfarehistorynetwork.com/article/oberstleutnant-alfred-becker/
  9. https://www.bmmhs.org/war-booty-tanks-and-the-german-military-c-1939-1945/
  10. http://www.kfzderwehrmacht.de/Homepage_english/Motor_Vehicles/France/Somua/Somua_MCL/somua_mcl.html
  11. https://www.armedconflicts.com/Tracteur-lourd-de-depannage-de-chars-SOMUA-MCL-5-t30746
  12. https://warhistory.org/@msw/article/self-propelled-mortar-carriers-ii-2
  13. https://www.armedconflicts.com/Brandt-Mle-27-31-81-mm-mortar-t26956
  14. https://www.militaryfactory.com/smallarms/detail.php?smallarms_id=483
  15. https://www.amazon.com/Panzer-Tracts-No-19-1-Beute-Panzerkampfwagen/dp/B008S6MKWY
  16. https://tank-afv.com/ww2/germany/7.5cm_PaK40_auf_Somua_MCG-S307-f.php
  17. https://www.fireandfury.com/orbats/late21pzd6jun44.pdf
  18. https://blog.sturmpanzer.com/21-panzer-division-kstn-list-1943/
  19. https://spearhead1944.com/gerpg/ger1.htm
  20. https://warhistory.org/%40msw/article/21st-panzer-division-d-day-1944-part-i
  21. https://panzerworld.com/21-panzer-division-june-1944
  22. https://www.tracesofwar.com/articles/6163/Thirty-two-days-in-Normandy.htm
  23. http://www.normandywarguide.com/war-diaries/152-infantry-brigade-hq-july-44
  24. https://blog.sturmpanzer.com/reihenwerfer-s307f-organization-kstn/
  25. https://www.iwm.org.uk/history/tactics-and-the-cost-of-victory-in-normandy
  26. https://en.topwar.ru/28438-trofeynaya-bronetankovaya-tehnika-vermahta-franciya.html
  27. https://warhistory.org/%40msw/article/self-propelled-mortar-carriers-ii-2
  28. https://military-history.fandom.com/wiki/Alfred_Becker
Add your contribution
Related Hubs
User Avatar
No comments yet.